webruby 0.2.7 → 0.9.1

data/modules/emscripten/system/include/SDL/SDL_mouse.h

@@ -1,213 +0,0 @@
-/*
-  Simple DirectMedia Layer
-  Copyright (C) 1997-2011 Sam Lantinga <slouken@libsdl.org>
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-*/
-
-/**
- *  \file SDL_mouse.h
- *  
- *  Include file for SDL mouse event handling.
- *
- *  Please note that this ONLY discusses "mice" with the notion of the
- *  desktop GUI. You (usually) have one system cursor, and the OS hides
- *  the hardware details from you. If you plug in 10 mice, all ten move that
- *  one cursor. For many applications and games, this is perfect, and this
- *  API has served hundreds of SDL programs well since its birth.
- *
- *  It's not the whole picture, though. If you want more lowlevel control,
- *  SDL offers a different API, that gives you visibility into each input
- *  device, multi-touch interfaces, etc.
- *
- *  Those two APIs are incompatible, and you usually should not use both
- *  at the same time. But for legacy purposes, this API refers to a "mouse"
- *  when it actually means the system pointer and not a physical mouse.
- *
- *  The other API is in SDL_input.h
- */
-
-#ifndef _SDL_mouse_h
-#define _SDL_mouse_h
-
-#include "SDL_stdinc.h"
-#include "SDL_error.h"
-#include "SDL_video.h"
-
-#include "begin_code.h"
-/* Set up for C function definitions, even when using C++ */
-#ifdef __cplusplus
-/* *INDENT-OFF* */
-extern "C" {
-/* *INDENT-ON* */
-#endif
-
-typedef struct SDL_Cursor SDL_Cursor;   /* Implementation dependent */
-
-
-/* Function prototypes */
-
-/**
- *  \brief Get the window which currently has mouse focus.
- */
-extern DECLSPEC SDL_Window * SDLCALL SDL_GetMouseFocus(void);
-
-/**
- *  \brief Retrieve the current state of the mouse.
- *  
- *  The current button state is returned as a button bitmask, which can
- *  be tested using the SDL_BUTTON(X) macros, and x and y are set to the
- *  mouse cursor position relative to the focus window for the currently
- *  selected mouse.  You can pass NULL for either x or y.
- */
-extern DECLSPEC Uint8 SDLCALL SDL_GetMouseState(int *x, int *y);
-
-/**
- *  \brief Retrieve the relative state of the mouse.
- *
- *  The current button state is returned as a button bitmask, which can
- *  be tested using the SDL_BUTTON(X) macros, and x and y are set to the
- *  mouse deltas since the last call to SDL_GetRelativeMouseState().
- */
-extern DECLSPEC Uint8 SDLCALL SDL_GetRelativeMouseState(int *x, int *y);
-
-/**
- *  \brief Moves the mouse to the given position within the window.
- *  
- *  \param window The window to move the mouse into, or NULL for the current mouse focus
- *  \param x The x coordinate within the window
- *  \param y The y coordinate within the window
- *  
- *  \note This function generates a mouse motion event
- */
-extern DECLSPEC void SDLCALL SDL_WarpMouseInWindow(SDL_Window * window,
-                                                   int x, int y);
-
-/**
- *  \brief Set relative mouse mode.
- *  
- *  \param enabled Whether or not to enable relative mode
- *
- *  \return 0 on success, or -1 if relative mode is not supported.
- *  
- *  While the mouse is in relative mode, the cursor is hidden, and the
- *  driver will try to report continuous motion in the current window.
- *  Only relative motion events will be delivered, the mouse position
- *  will not change.
- *  
- *  \note This function will flush any pending mouse motion.
- *  
- *  \sa SDL_GetRelativeMouseMode()
- */
-extern DECLSPEC int SDLCALL SDL_SetRelativeMouseMode(SDL_bool enabled);
-
-/**
- *  \brief Query whether relative mouse mode is enabled.
- *  
- *  \sa SDL_SetRelativeMouseMode()
- */
-extern DECLSPEC SDL_bool SDLCALL SDL_GetRelativeMouseMode(void);
-
-/**
- *  \brief Create a cursor, using the specified bitmap data and
- *         mask (in MSB format).
- *  
- *  The cursor width must be a multiple of 8 bits.
- *  
- *  The cursor is created in black and white according to the following:
- *  <table>
- *  <tr><td> data </td><td> mask </td><td> resulting pixel on screen </td></tr>
- *  <tr><td>  0   </td><td>  1   </td><td> White </td></tr>
- *  <tr><td>  1   </td><td>  1   </td><td> Black </td></tr>
- *  <tr><td>  0   </td><td>  0   </td><td> Transparent </td></tr>
- *  <tr><td>  1   </td><td>  0   </td><td> Inverted color if possible, black 
- *                                         if not. </td></tr>
- *  </table>
- *  
- *  \sa SDL_FreeCursor()
- */
-extern DECLSPEC SDL_Cursor *SDLCALL SDL_CreateCursor(const Uint8 * data,
-                                                     const Uint8 * mask,
-                                                     int w, int h, int hot_x,
-                                                     int hot_y);
-
-/**
- *  \brief Create a color cursor.
- *  
- *  \sa SDL_FreeCursor()
- */
-extern DECLSPEC SDL_Cursor *SDLCALL SDL_CreateColorCursor(SDL_Surface *surface,
-                                                          int hot_x,
-                                                          int hot_y);
-
-/**
- *  \brief Set the active cursor.
- */
-extern DECLSPEC void SDLCALL SDL_SetCursor(SDL_Cursor * cursor);
-
-/**
- *  \brief Return the active cursor.
- */
-extern DECLSPEC SDL_Cursor *SDLCALL SDL_GetCursor(void);
-
-/**
- *  \brief Frees a cursor created with SDL_CreateCursor().
- *  
- *  \sa SDL_CreateCursor()
- */
-extern DECLSPEC void SDLCALL SDL_FreeCursor(SDL_Cursor * cursor);
-
-/**
- *  \brief Toggle whether or not the cursor is shown.
- *  
- *  \param toggle 1 to show the cursor, 0 to hide it, -1 to query the current 
- *                state.
- *  
- *  \return 1 if the cursor is shown, or 0 if the cursor is hidden.
- */
-extern DECLSPEC int SDLCALL SDL_ShowCursor(int toggle);
-
-/**
- *  Used as a mask when testing buttons in buttonstate.
- *   - Button 1:  Left mouse button
- *   - Button 2:  Middle mouse button
- *   - Button 3:  Right mouse button
- */
-#define SDL_BUTTON(X)		(1 << ((X)-1))
-#define SDL_BUTTON_LEFT		1
-#define SDL_BUTTON_MIDDLE	2
-#define SDL_BUTTON_RIGHT	3
-#define SDL_BUTTON_X1		4
-#define SDL_BUTTON_X2		5
-#define SDL_BUTTON_LMASK	SDL_BUTTON(SDL_BUTTON_LEFT)
-#define SDL_BUTTON_MMASK	SDL_BUTTON(SDL_BUTTON_MIDDLE)
-#define SDL_BUTTON_RMASK	SDL_BUTTON(SDL_BUTTON_RIGHT)
-#define SDL_BUTTON_X1MASK	SDL_BUTTON(SDL_BUTTON_X1)
-#define SDL_BUTTON_X2MASK	SDL_BUTTON(SDL_BUTTON_X2)
-
-
-/* Ends C function definitions when using C++ */
-#ifdef __cplusplus
-/* *INDENT-OFF* */
-}
-/* *INDENT-ON* */
-#endif
-#include "close_code.h"
-
-#endif /* _SDL_mouse_h */
-
-/* vi: set ts=4 sw=4 expandtab: */

data/modules/emscripten/system/include/SDL/SDL_mutex.h

@@ -1,248 +0,0 @@
-/*
-  Simple DirectMedia Layer
-  Copyright (C) 1997-2011 Sam Lantinga <slouken@libsdl.org>
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-*/
-
-#ifndef _SDL_mutex_h
-#define _SDL_mutex_h
-
-/**
- *  \file SDL_mutex.h
- *  
- *  Functions to provide thread synchronization primitives.
- */
-
-#include "SDL_stdinc.h"
-#include "SDL_error.h"
-
-#include "begin_code.h"
-/* Set up for C function definitions, even when using C++ */
-#ifdef __cplusplus
-/* *INDENT-OFF* */
-extern "C" {
-/* *INDENT-ON* */
-#endif
-
-/**
- *  Synchronization functions which can time out return this value
- *  if they time out.
- */
-#define SDL_MUTEX_TIMEDOUT	1
-
-/**
- *  This is the timeout value which corresponds to never time out.
- */
-#define SDL_MUTEX_MAXWAIT	(~(Uint32)0)
-
-
-/**
- *  \name Mutex functions
- */
-/*@{*/
-
-/* The SDL mutex structure, defined in SDL_mutex.c */
-struct SDL_mutex;
-typedef struct SDL_mutex SDL_mutex;
-
-/**
- *  Create a mutex, initialized unlocked.
- */
-extern DECLSPEC SDL_mutex *SDLCALL SDL_CreateMutex(void);
-
-/**
- *  Lock the mutex.
- *  
- *  \return 0, or -1 on error.
- */
-#define SDL_LockMutex(m)	SDL_mutexP(m)
-extern DECLSPEC int SDLCALL SDL_mutexP(SDL_mutex * mutex);
-
-/**
- *  Unlock the mutex.
- *  
- *  \return 0, or -1 on error.
- *  
- *  \warning It is an error to unlock a mutex that has not been locked by
- *           the current thread, and doing so results in undefined behavior.
- */
-#define SDL_UnlockMutex(m)	SDL_mutexV(m)
-extern DECLSPEC int SDLCALL SDL_mutexV(SDL_mutex * mutex);
-
-/** 
- *  Destroy a mutex.
- */
-extern DECLSPEC void SDLCALL SDL_DestroyMutex(SDL_mutex * mutex);
-
-/*@}*//*Mutex functions*/
-
-
-/**
- *  \name Semaphore functions
- */
-/*@{*/
-
-/* The SDL semaphore structure, defined in SDL_sem.c */
-struct SDL_semaphore;
-typedef struct SDL_semaphore SDL_sem;
-
-/**
- *  Create a semaphore, initialized with value, returns NULL on failure.
- */
-extern DECLSPEC SDL_sem *SDLCALL SDL_CreateSemaphore(Uint32 initial_value);
-
-/**
- *  Destroy a semaphore.
- */
-extern DECLSPEC void SDLCALL SDL_DestroySemaphore(SDL_sem * sem);
-
-/**
- *  This function suspends the calling thread until the semaphore pointed 
- *  to by \c sem has a positive count. It then atomically decreases the 
- *  semaphore count.
- */
-extern DECLSPEC int SDLCALL SDL_SemWait(SDL_sem * sem);
-
-/**
- *  Non-blocking variant of SDL_SemWait().
- *  
- *  \return 0 if the wait succeeds, ::SDL_MUTEX_TIMEDOUT if the wait would 
- *          block, and -1 on error.
- */
-extern DECLSPEC int SDLCALL SDL_SemTryWait(SDL_sem * sem);
-
-/**
- *  Variant of SDL_SemWait() with a timeout in milliseconds.
- *  
- *  \return 0 if the wait succeeds, ::SDL_MUTEX_TIMEDOUT if the wait does not 
- *          succeed in the allotted time, and -1 on error.
- *  
- *  \warning On some platforms this function is implemented by looping with a 
- *           delay of 1 ms, and so should be avoided if possible.
- */
-extern DECLSPEC int SDLCALL SDL_SemWaitTimeout(SDL_sem * sem, Uint32 ms);
-
-/**
- *  Atomically increases the semaphore's count (not blocking).
- *  
- *  \return 0, or -1 on error.
- */
-extern DECLSPEC int SDLCALL SDL_SemPost(SDL_sem * sem);
-
-/**
- *  Returns the current count of the semaphore.
- */
-extern DECLSPEC Uint32 SDLCALL SDL_SemValue(SDL_sem * sem);
-
-/*@}*//*Semaphore functions*/
-
-
-/**
- *  \name Condition variable functions
- */
-/*@{*/
-
-/* The SDL condition variable structure, defined in SDL_cond.c */
-struct SDL_cond;
-typedef struct SDL_cond SDL_cond;
-
-/**
- *  Create a condition variable.
- *
- *  Typical use of condition variables:
- *
- *  Thread A:
- *    SDL_LockMutex(lock);
- *    while ( ! condition ) {
- *        SDL_CondWait(cond, lock);
- *    }
- *    SDL_UnlockMutex(lock);
- *
- *  Thread B:
- *    SDL_LockMutex(lock);
- *    ...
- *    condition = true;
- *    ...
- *    SDL_CondSignal(cond);
- *    SDL_UnlockMutex(lock);
- *
- *  There is some discussion whether to signal the condition variable
- *  with the mutex locked or not.  There is some potential performance
- *  benefit to unlocking first on some platforms, but there are some
- *  potential race conditions depending on how your code is structured.
- *
- *  In general it's safer to signal the condition variable while the
- *  mutex is locked.
- */
-extern DECLSPEC SDL_cond *SDLCALL SDL_CreateCond(void);
-
-/**
- *  Destroy a condition variable.
- */
-extern DECLSPEC void SDLCALL SDL_DestroyCond(SDL_cond * cond);
-
-/**
- *  Restart one of the threads that are waiting on the condition variable.
- *  
- *  \return 0 or -1 on error.
- */
-extern DECLSPEC int SDLCALL SDL_CondSignal(SDL_cond * cond);
-
-/**
- *  Restart all threads that are waiting on the condition variable.
- *
- *  \return 0 or -1 on error.
- */
-extern DECLSPEC int SDLCALL SDL_CondBroadcast(SDL_cond * cond);
-
-/**
- *  Wait on the condition variable, unlocking the provided mutex.
- *  
- *  \warning The mutex must be locked before entering this function!
- *  
- *  The mutex is re-locked once the condition variable is signaled.
- *  
- *  \return 0 when it is signaled, or -1 on error.
- */
-extern DECLSPEC int SDLCALL SDL_CondWait(SDL_cond * cond, SDL_mutex * mutex);
-
-/**
- *  Waits for at most \c ms milliseconds, and returns 0 if the condition
- *  variable is signaled, ::SDL_MUTEX_TIMEDOUT if the condition is not
- *  signaled in the allotted time, and -1 on error.
- *
- *  \warning On some platforms this function is implemented by looping with a 
- *           delay of 1 ms, and so should be avoided if possible.
- */
-extern DECLSPEC int SDLCALL SDL_CondWaitTimeout(SDL_cond * cond,
-                                                SDL_mutex * mutex, Uint32 ms);
-
-/*@}*//*Condition variable functions*/
-
-
-/* Ends C function definitions when using C++ */
-#ifdef __cplusplus
-/* *INDENT-OFF* */
-}
-/* *INDENT-ON* */
-#endif
-#include "close_code.h"
-
-#endif /* _SDL_mutex_h */
-
-/* vi: set ts=4 sw=4 expandtab: */

data/modules/emscripten/system/include/SDL/SDL_name.h

@@ -1,11 +0,0 @@
-
-#ifndef _SDLname_h_
-#define _SDLname_h_
-
-#if defined(__STDC__) || defined(__cplusplus)
-#define NeedFunctionPrototypes 1
-#endif
-
-#define SDL_NAME(X)	SDL_##X
-
-#endif /* _SDLname_h_ */