ojxv 0.0.2 → 1.0.0

data/lib/ojxv/schemas/jats/1.1d2/JATS-journalpublishing1-mathml3.dtd

@@ -0,0 +1,813 @@
+<!-- ============================================================= -->
+<!--  MODULE:    Journal Publishing DTD                            -->
+<!--  VERSION:   ANSI/NISO JATS Version 1.0 (Z39.96-2012)          -->
+<!--  DATE:      September 2014                                    -->
+<!--                                                               -->
+<!-- ============================================================= -->
+
+<!-- ============================================================= -->
+<!--                    PUBLIC DOCUMENT TYPE DEFINITION            -->
+<!--                        TYPICAL INVOCATION                     -->
+<!--
+"-//NLM//DTD JATS (Z39.96) Journal Publishing DTD with MathML3 v1.1d2 20140930//EN"
+     Delivered as file "JATS-journalpublishing1-mathml3.dtd"
+     Available at: 
+     http://jats.nlm.nih.gov/publishing/1.1d2/JATS-journalpublishing1.dtd
+                                                                   -->
+<!-- ============================================================= -->
+
+
+<!-- ============================================================= -->
+<!-- SYSTEM:     Journal Publishing DTD of the JATS DTD Suite      -->
+<!--                                                               -->
+<!-- PURPOSE:    DTD for creation of new journal articles          -->
+<!--                                                               -->
+<!--             The Journal Publishing DTD is an application of   -->
+<!--             the ANSI/NISO Z39.96 Journal Publishing Tag Set.  --> 
+<!--             IT is a subset of the Journal Archiving and       -->
+<!--             Interchange DTD that is optimized for the         -->
+<!--             creation or publishing of existing journal        -->
+<!--             articles and some non-article material such as    -->
+<!--             product and book reviews in XML. It describes     -->
+<!--             both the metadata for a journal article and       -->
+<!--             the full content of the article.                  -->                       
+<!--                                                               -->
+<!--             This DTD was constructed using the modules in the -->
+<!--             JATS DTD Suite.                                   -->
+<!--                                                               -->
+<!-- TAG SET SPONSOR                                               -->
+<!--             National Center for Biotechnology                 -->
+<!--                Information (NCBI)                             -->
+<!--             National Library of Medicine (NLM)                -->
+<!--                                                               -->
+<!-- CREATED FOR:                                                  -->
+<!--             This DTD was created from the JATS DTD Suite.     -->
+<!--             Digital archives and publishers may use the       -->
+<!--             DTD as is for markup of journal literature or     -->
+<!--             related material for archiving and transferring   -->
+<!--             such material between archives or create a        -->
+<!--             custom XML DTD from the Suite for                 -->
+<!--             these purposes.                                   -->
+<!--                                                               -->
+<!--             This DTD is in the public domain. An organization -->
+<!--             that wishes to create its own DTD from the suite  -->
+<!--             may do so without permission from NLM.            -->
+<!--                                                               -->
+<!--             The suite has been set up to be extended using a  -->
+<!--             new DTD file and a new DTD-specific customization -->
+<!--             module to redefine the many Parameter Entities.   -->
+<!--             Do not modify the suite directly or redistribute  -->
+<!--             modified versions of the suite.                   -->
+<!--                                                               -->
+<!--             In the interest of maintaining consistency and    -->
+<!--             clarity for potential users, NLM requests:        -->
+<!--                                                               -->
+<!--             1. If you create a DTD from the JATS DTD Suite    -->
+<!--                and intend to stay compatible with the suite,  -->
+<!--                then please include the following statement    -->
+<!--                as a comment in all of your DTD modules:       -->
+<!--                   "Created from, and fully compatible with,   -->
+<!--                    the ANSI/NISO Z39.96 Journal Article Tag   -->
+<!--                    Suite (JATS)."                             -->
+<!--                                                               -->
+<!--             2. If you alter one or more modules of the suite, -->
+<!--                then please rename your version and all its    -->
+<!--                modules to avoid any confusion with the        -->
+<!--                original suite. Also, please include the       -->
+<!--                following statement as a comment in all your   -->
+<!--                DTD modules:                                   -->
+<!--                   "Based in part on, but not fully compatible -->
+<!--                    with, the ANSI/NISO Z39.96 Journal Article -->
+<!--                    Tag Suite (JATS)."                         -->
+<!--                                                               -->
+<!-- ORIGINAL CREATION DATE:                                       -->
+<!--             February 2003                                     -->
+<!--                                                               -->
+<!-- CREATED BY: Mulberry Technologies, Inc. for the NISO Z39.96   -->
+<!--             Working Group. Mulberry Technologies was          -->
+<!--             supported by National Center for Biotechnology    -->
+<!--             Information (NCBI), a center of the US National   -->
+<!--             Library of Medicine (NLM).                        -->
+<!--                                                               -->
+<!--             The Journal Publishing DTD is built from the      -->
+<!--             Archiving and Interchange DTD Suite.              -->
+<!--                                                               -->
+<!--             Suggestions for refinements and enhancements to   -->
+<!--             this DTD should be sent in email to:              -->
+<!--                 jats@ncbi.nlm.nih.gov                         -->
+<!-- ============================================================= -->
+
+
+<!-- ============================================================= -->
+<!--                    DTD VERSION/CHANGE HISTORY                 -->
+<!-- ============================================================= -->
+<!--
+
+Version  Reason/Occasion                   (who) vx.x (yyyy-mm-dd)
+
+     =============================================================
+     JATS Version 1.1d2              (DAL/BTU) v1.1d2 (2014-09-30)
+   
+     NISO JATS is a continuing maintenance NISO Standard, which 
+     requires voting by the NISO membership to be changed. This
+     Committee Draft 1.1d2 will be sent to the NISO voting
+     membership, to become (if approved) NISO JATS 1.1.
+     
+     This catalog represents an interim version of the
+     non-normative JATS DTD Suite, as an indication to JATS users
+     the decisions that have been made by the JATS Standing
+     Committee.
+
+ 21. <VOLUME> INSIDE <ARTICLE-META> and <FRONT-STUB>
+   - Allowed <volume> to repeat inside <article-meta>, the types to 
+     be distinguished using @content-type
+   - Added new optional element <volume-issue-group> inside 
+     <article-meta) following all volume and issue elements
+     to hold volume-issue pairs (or n-tuples) when a second
+     and subsequent <volume> has its own related issue
+     information.
+   - Made <issue> repeatable, for those who choose not to use
+     the new wrapper element.
+
+ 20. JATS became version "1.1d2" and "v1.1d2 20140930//EN"
+   
+     =============================================================
+     NISO JATS Version 1.1d1           (DAL/BTU) v1.1 (2013-11-15)
+   
+     ANSI/NISO Z39.96-2012 (pre-release for V1.0 BITS; Version 1.1) 
+
+     NISO JATS Standing Committee met and answered the requests and
+     suggestions from the NISO request forms.
+     Details concerning ANSI/NISO Z39.96-2012 JATS-based DTDs, XSDs, 
+     RNGs and supporting documentation are available at
+           http://jats.nlm.nih.gov/1.1/
+   
+ 19. MATHML 3.0 - Created a new version of the Publishing DTD to
+     take MathML 3.0 instead of MathML 2.0.
+     Nothing else changed from regular Publishing DTD.
+     Call to MathML setup module changed and added call to the
+     specific MathML 3.0 modules.
+   
+ 18. DTD Version - Updated the DTD-version attribute to "1.1d1" and 
+     the formal public identifier to the date: "v1.1d1 20130915//EN".
+
+ 17. GLOBAL ATTRIBUTES - Added the new module for Common (global)
+     attributes: %JATS-common-atts.ent;, called in before the
+     customizations models module.
+
+ 16. GLOBAL ATTRIBUTES - Added the new parameter entity 
+         %jats-common-atts;
+     to every element in this module. This PE adds (for now) the
+     @id attribute and the @xml:base attribute to every element,
+     whether metadata or narrative.
+     Since the @id in this parameter entity is optional, a second
+     parameter entity jats-common-atts-id-required was also added.
+     The two are kept in sync with the jats-base-atts parameter 
+     entity.
+     This added a new attribute list to:
+      - back
+      - front
+      - front-stub
+      - sub-article
+                          
+ 15. ABSTRACTS AND KEYWORDS
+       Changed "abstract*" to "(%abstract.class;)*"
+       and "kwd-group*" to "(%kwd-group.class;)*" since those
+       classes now exist. Elements should have a limited number of
+       ways to be invoked.
+        - front-stub (through %front-stub-model;)
+   
+     =============================================================
+     NISO JATS Version 1.0             (DAL/BTU) v1.0 (2012-xx-xx)
+   
+     ANSI/NISO Z39.96-2012 (Version 1.0) 
+
+     Details concerning ANSI/NISO Z39.96-2012 JATS-based DTDs, XSDs, 
+     RNGs and supporting documentation are available at
+           http://jats.nlm.nih.gov/1.0/
+   
+ 11. RELATED OBJECT - Added <related-object> everywhere
+     <related-article> was used, including inside 
+     <front-stub> using front-stub-model.
+   
+ 10. Updated the DTD-version attribute to "1.0" and the formal
+     public identifier to the date: "v1.0 20120330//EN".
+
+     =============================================================
+     Version 0.4                       (DAL/BTU) v0.4 (2011-01-31)
+   
+     This Tag Set is in the process of becoming a NISO standard.
+     The version numbers are starting over from 0.4", as a Trial
+     Use Draft, to be made into "Version 1.0" when the Tag Suite 
+     becomes a NISO standard. Thus, the version number that would
+     have been "NLM Version 3.1 Draft" has become NISO JATS
+     "Version 0.4".
+
+     Details on NISO Trial Use Draft Version 0.4 are available at
+           http://jats.nlm.nih.gov/JATS-0.4.
+   
+  9. Updated the public identifier to "v0.4 20110131", 
+     modified the formal public identifier to include "JATS (Z39.96)",
+     and the filename as delivered to include "JATS" and the
+     new version number "0".
+
+  8. BODY ATTRIBUTES - Added attribute list and new PE %body-atts;
+     to the model of <body>. The only current attribute is
+     @specific-use, which indicates, for example, not a real
+     tagged XML body, but a 'bag of words" for indexing purposes.
+
+  7. I18N - Changed the default for @xml:lang from "en" to
+     #IMPLIED, so that the @xml:lang would inherit properly and
+     not need to be over-ridden in
+      - <sub-article> through %sub-article-atts;
+      - <response> through %response-atts;
+
+  6. XML:LANG - Added @xml:lang to the following elements:
+     Added to facilitate multiple languages.
+       - article
+
+  5. AFFILIATION ALTERNATIVES - Added the element <aff-alternatives>
+     to <front-stub> through %front-stub-model;. This element
+     will hold multiple <aff>s that are a representation of a
+     single affiliation, for example, the name of an institution
+     in two languages or two scripts.
+
+  4. LANGUAGE CODES - Codes for languages as well as variants,
+     transliterations, regions, scripts, and combinations
+     such as "Jpan"(Han + Hiragana + Katakana). These values should be
+     taken from RFC 5646/W3C/IANA Subtag Registry recommendations
+     and can be found online at:
+       http://www.iana.org/assignments/language-subtag-registry
+   
+  3. Updated the DTD-version attribute to "0.4" 
+
+     =============================================================
+     Version 3.0                       (DAL/BTU) v3.0 (2007-10-31)
+
+     Version 3.0 is the first non-backward-compatible release.
+     In addition to the usual incremental changes, some
+     elements and attributes have been renamed and/or remodeled
+     to better meet user needs and to increase tag set consistency.
+     All module change histories are available through the Tag Suite
+     web site at http://dtd.nlm.nih.gov.
+
+     Details on version 3.0 are available at
+           http://dtd.nlm.nih.gov/3.0.
+
+  2. Changed default @xml:lang from "EN" from "en" to match latest
+     RFC 4646/W3C/IANA Subtag Registry recommendations
+
+  1. Updated public identifier to "v3.0 20071031//EN"              -->
+
+
+<!-- ============================================================= -->
+<!--                    DESIGN CONSIDERATIONS                      -->
+<!-- ============================================================= -->
+
+
+<!-- MODULAR DTD LIBRARY
+                        A set of journal archiving and interchange
+                        DTD modules was written as the basis for
+                        publishing, interchange, and repository
+                        DTDs, with the intention that DTDs for
+                        specific purposes, such as this publishing
+                        DTD, would be developed based on them.
+
+                        This publishing DTD has been optimized for
+                        the creation of new journal articles. This
+                        means that it is far smaller (fewer elements,
+                        and fewer choices in many contexts) than was
+                        the interchange DTD. Where in the interchange
+                        DTD there may have been several ways to
+                        express the same information, only one is
+                        provided for authoring. It was not the
+                        intention to limit the expressive power
+                        licensed by the DTD, but rather to limit the
+                        meaningless choices needed in a full
+                        archiving and interchange DTD that make
+                        conversion from a wide variety of formats as
+                        easy as possible.
+
+                        This Publishing DTD has been developed from
+                        the JATS DTD Suite modules, in the approved 
+                        manner, making changes to the declarations 
+                        in those modules by overriding Parameter 
+                        Entity defined in the over-ride 
+                        (customization) modules:
+                           %journalpubcustom-classes.ent;
+                           %journalpubcustom-mixes.ent;
+                           %journalpubcustom-models.ent;
+                        which are all declared in the module:
+                           %journalpubcustom-modules.ent;
+                        Additional Publishing-DTD-Specific material
+                        is defined in the module(s):
+                           %nlmcitation.ent;
+                        No changes to any of the original JATS DTD 
+                        Suite modules are required in order to 
+                        use this DTD.                              -->
+
+
+<!-- ============================================================= -->
+<!--                    MODULES OF MODULES INVOKED                 -->
+<!-- ============================================================= -->
+
+
+<!--                    MODULE TO NAME DTD-SPECIFIC MODULES        -->
+<!--                    Names all DTD-specific external modules    -->
+<!ENTITY % journalpubcustom-modules.ent
+                        PUBLIC
+"-//NLM//DTD JATS (Z39.96) Journal Publishing DTD-Specific Modules v1.1d2 20140930//EN"
+"JATS-journalpubcustom-modules1.ent"                                 >
+%journalpubcustom-modules.ent;
+
+
+<!--                    MODULE TO NAME THE MATHML 3.0 MODULES      -->
+<!--                    Names all DTD-specific external modules    -->
+<!ENTITY % mathml3-modules.ent
+                        PUBLIC
+"-//NLM//DTD JATS (Z39.96) JATS MathML 3.0 Modules v1.1d2 20140930//EN"
+"JATS-mathml3-modules1.ent"                                          >
+%mathml3-modules.ent;
+
+
+<!--                    MODULE TO NAME THE MODULES                 -->
+<!--                    Declares all the external modules that are
+                        part of the modular Journal Archiving and
+                        Interchange DTD Suite library. Thus it does
+                        NOT declare itself; the DTD-specific
+                        module-of-modules; or the DTD-specific class,
+                        mix, or model over-ride modules. Those are
+                        declared in the DTD-specific module of modules.
+                           Since this module declares but does not
+                        invoke modules, this DTD invokes any modules
+                        it uses by referencing the external
+                        Parameter Entities defined in the Module of
+                        Modules. To include a set of elements (such
+                        as all the lists or the table elements) this
+                        module defines the external Parameter Entity
+                        for the module(s) that contains the table
+                        declarations and the DTD references that
+                        entity.                                    -->
+<!ENTITY % modules.ent  PUBLIC
+"-//NLM//DTD JATS (Z39.96) JATS DTD Suite Module of Modules v1.1d2 20140930//EN"
+"JATS-modules1.ent"                                                  >
+%modules.ent;
+                                                            
+
+<!-- ============================================================= -->
+<!--                    SET UP COMMON (ALL ELEMENT) ATTRIBUTES     -->
+<!-- ============================================================= -->
+
+
+<!--                    COMMON ATTRIBUTES MODULE                   -->
+<!--                    Set up the common attributes, those used on
+                        nearly all elements.
+                        Must be called before the custom models
+                        module.                                    -->
+%JATS-common-atts.ent;
+
+
+<!-- ============================================================= -->
+<!--                    CUSTOMIZATION MODULES INVOKED              -->
+<!--                    Note: These modules must be called after   -->
+<!--                    all Module of Modules but before any other -->
+<!--                    modules. Unlike any other grouping, order  -->
+<!--                    of these modules matters.                  -->
+<!-- ============================================================= -->
+
+
+<!--                    DTD-SPECIFIC CLASS CUSTOMIZATIONS MODULE   -->
+<!--                    Names the module that holds the DTD-specific
+                        class definitions for the Journal Publishing
+                        DTD that will over-ride classes in the Suite.
+                        (Defined in %journalpubcustom-modules.ent;)-->
+%journalpubcustom-classes.ent;
+
+
+<!--                    DEFAULT ELEMENT CLASSES MODULE             -->
+<!--                    Names the module that holds the standard
+                        class definitions for the JATS DTD Suite.  -->
+%default-classes.ent;
+
+
+<!--                    DTD-SPECIFIC MIX CUSTOMIZATIONS MODULE     -->
+<!--                    Set up the Parameter Entities and element
+                        class definitions that will be used to
+                        over-ride some element mixes in this DTD.
+                        (Defined in %journalpubcustom-modules.ent;)-->
+%journalpubcustom-mixes.ent;
+
+
+<!--                    DEFAULT MIX CUSTOMIZATIONS MODULE          -->
+<!--                    Names the module that holds the standard
+                        mix definitions for the JATS DTD Suite.    -->
+%default-mixes.ent;
+
+
+<!--                    DTD-SPECIFIC MODELS/ATTRIBUTES CUSTOMIZATIONS
+                        MODULE                                     -->
+<!--                    Names the module that holds the over-rides
+                        of content models, attribute lists, elements
+                        lists to be used in content models, and
+                        attribute values. These are DTD-specific.
+                        (Defined in %journalpubcustom-modules.ent;)-->
+%journalpubcustom-models.ent;
+
+
+
+<!-- ============================================================= -->
+<!--                    COMMON (SHARED) ELEMENTS MODULE INVOKED    -->
+<!-- ============================================================= -->
+
+
+<!--                    COMMON (SHARED) DECLARATIONS               -->
+<!--                    Declarations for elements, attributes,
+                        entities, and Notations that are shared by
+                        more than one class module. Note: Must be
+                        called before any of the class modules.    -->
+
+%common.ent;
+
+
+<!-- ============================================================= -->
+<!--                    JOURNAL ARTICLE CLASS ELEMENTS (alpha)     -->
+<!-- ============================================================= -->
+
+
+<!--                    ARTICLE METADATA ELEMENTS                  -->
+%articlemeta.ent;
+
+
+<!--                    BACK MATTER ELEMENTS                       -->
+%backmatter.ent;
+
+
+<!--                    DISPLAY (GRAPHICAL) ELEMENTS               -->
+%display.ent;
+
+
+<!--                    FORMATTING ELEMENT CLASSES                 -->
+<!--                    Elements that change rendition/display.    -->
+%format.ent;
+
+
+<!--                    FUNDING ELEMENTS                           -->
+<!--                    Elements that describe the sponsorship or
+                        open access                                -->
+%funding.ent;
+
+
+<!--                    JOURNAL METADATA ELEMENTS                  -->
+%journalmeta.ent;
+
+
+<!--                    LINK CLASS ELEMENTS                        -->
+%link.ent;
+
+
+<!--                    LIST CLASS ELEMENTS                        -->
+%list.ent;
+
+
+<!--                    MATH ELEMENTS                              -->
+%math.ent;
+
+
+<!--                    NLM CITATION ELEMENT                       -->
+%nlmcitation.ent;
+
+
+<!--                    PARAGRAPH-LEVEL ELEMENTS                   -->
+%para.ent;
+
+
+<!--                    PHRASE-LEVEL ELEMENTS                      -->
+%phrase.ent;
+
+
+<!--                    BIBLIOGRAPHIC REFERENCE (CITATION)
+                        CLASS ELEMENTS                             -->
+%references.ent;
+
+
+<!--                    RELATED OBJECT ELEMENT                     -->
+<!--                    Defines the <related-object> element to
+                        describe a related object such as a
+                        related book or a dataset.                 -->
+%related-object.ent;
+
+
+<!--                    SECTION ELEMENTS                           -->
+%section.ent;
+
+
+<!-- ============================================================= -->
+<!--                    THE REST OF THE EXTERNAL MODULES INVOKED   -->
+<!-- ============================================================= -->
+
+
+<!--                    MATHML SETUP MODULE                        -->
+<!--                    Invoke the MathML modules                  -->
+%mathml3-mathmlsetup.ent;
+
+
+
+<!--                    XHTML TABLE SETUP MODULE                   -->
+<!--                    Set up the necessary Parameter Entity values
+                        and then invoke XHTML (HTML 4.0) table
+                        module                                     -->
+%XHTMLtablesetup.ent;
+
+
+<!--                    SPECIAL CHARACTERS DECLARATIONS            -->
+<!--                    Standard XML special character entities
+                        used in this DTD                           -->
+%xmlspecchars.ent;
+
+
+<!--                    CUSTOM SPECIAL CHARACTERS DECLARATIONS     -->
+<!--                    Custom special character entities created
+                        specifically for use in this DTD Suite     -->
+%chars.ent;
+
+
+<!--                    NOTATION DECLARATIONS MODULE               -->
+%notat.ent;
+
+
+<!-- ============================================================= -->
+<!--                    PARAMETER ENTITIES FOR ATTRIBUTE LISTS     -->
+<!-- ============================================================= -->
+
+
+<!--                    DTD VERSION                                -->
+<!--                    What version of this DTD was used to make
+                        the document instance under consideration.
+                        Note that this is a fixed value that should
+                        change every time the DTD changes versions or
+                        revisions.                                 -->
+<!ENTITY % dtd-version
+            "dtd-version
+                        CDATA                        #FIXED '1.1d2'" >
+
+
+
+<!--                    ARTICLE ATTRIBUTES                         -->
+<!--                    Attributes for the top-level element
+                        <article>                                  -->
+<!ENTITY % article-atts
+            "%jats-common-atts;                                       
+             article-type
+                        CDATA                             #IMPLIED
+             %dtd-version;
+             specific-use
+                        CDATA                             #IMPLIED
+             xml:lang   NMTOKEN                           'en'
+             %XLINK.xmlns.attrib;
+             %MATHML.xmlns.attrib;
+             %Schema.xmlns.attrib;"                                  >
+
+
+<!--                    BACK ATTRIBUTES                            -->
+<!--                    Attributes for the <back> element          -->
+<!ENTITY % back-atts
+            "%jats-common-atts;"                                     >
+
+
+<!--                    BODY ATTRIBUTES                            -->
+<!--                    Attributes for the <body> element          -->
+<!ENTITY % body-atts
+            "%jats-common-atts;                                       
+             specific-use
+                        CDATA                             #IMPLIED"  >
+
+
+<!--                    FRONT ATTRIBUTES                           -->
+<!--                    Attributes for the <front> element         -->
+<!ENTITY % front-atts
+            "%jats-common-atts;"                                     >
+
+
+<!--                    FRONT STUB ATTRIBUTES                      -->
+<!--                    Attributes for the <front-stub> element    -->
+<!ENTITY % front-stub-atts
+            "%jats-common-atts;"                                     >
+
+
+<!--                    SUB-ARTICLE ATTRIBUTES                     -->
+<!--                    Attributes for the <sub-article> element   -->
+<!ENTITY % sub-article-atts
+            "%jats-common-atts;                                       
+             article-type
+                        CDATA                             #IMPLIED
+             specific-use
+                        CDATA                             #IMPLIED
+             xml:lang   NMTOKEN                           #IMPLIED"  >
+
+
+<!--                    RESPONSE ATTRIBUTES                        -->
+<!--                    Attributes for the <response> element      -->
+<!ENTITY % response-atts
+            "%jats-common-atts;                                       
+             response-type
+                        CDATA                             #IMPLIED
+             specific-use
+                        CDATA                             #IMPLIED
+             xml:lang   NMTOKEN                           #IMPLIED"  >
+
+
+<!-- ============================================================= -->
+<!--                    JOURNAL ARTICLE ELEMENTS                   -->
+<!-- ============================================================= -->
+
+
+<!--                    ARTICLE MODEL (LIMITED)                    -->
+<!--                    Article-like model used for, for example,
+                        a short sub-article such as a news brief that
+                        is contained in side a journal article.
+                                                                   -->
+<!ENTITY % article-short-model
+                        "((front | front-stub), body?, back?,
+                          floats-group?)"                            >
+
+
+<!--                    ARTICLE MODEL WITH SUBARTICLE OR RESPONSE  -->
+<!--                    Typical journal article model, which may
+                        contain extended components, such as
+                        sub-articles or responses, but which usually
+                        contains neither.
+                                                                   -->
+<!ENTITY % article-full-model
+                        "(front, body?, back?, floats-group?,
+                         (sub-article* | response*) )"               >
+
+
+<!--                    ARTICLE                                    -->
+<!--                    The complete content of a journal article.
+                        Details at:
+                        http://jats.nlm.nih.gov/publishing/tag-library/1.0/index.html?elem=article
+                                                                   -->
+<!ELEMENT  article      %article-full-model;                         >
+<!ATTLIST  article
+             %article-atts;                                          >
+
+
+<!-- ============================================================= -->
+<!--                    FRONT MATTER ELEMENTS                      -->
+<!-- ============================================================= -->
+
+
+<!--                    FRONT MATTER MODEL                         -->
+<!--                    Model for the <front> matter (the header
+                        metadata) of a journal article)            -->
+<!ENTITY % front-model  "(journal-meta, article-meta,
+                          (%front-back.class;)? )"                   >
+
+
+<!--                    FRONT MATTER                               -->
+<!--                    The metadata concerning an article, such as
+                        the name and issue of the journal in which it
+                        appears and the name and author(s) of the
+                        article.
+                        Details at:
+                        http://jats.nlm.nih.gov/publishing/tag-library/1.0/index.html?elem=front
+                                                                   -->
+<!ELEMENT  front        %front-model;                                >
+<!ATTLIST  front
+             %front-atts;                                            >
+
+
+<!-- ============================================================= -->
+<!--                    BODY ELEMENTS                              -->
+<!-- ============================================================= -->
+
+
+<!--                    BODY MODEL                                 -->
+<!--                    Content model for the Body (main textual
+                        content) of a journal article.             -->
+<!ENTITY % body-model   "((%para-level;)*, (%sec-level;)*,
+                          sig-block?)"                               >
+
+
+<!--                    BODY OF THE ARTICLE                        -->
+<!--                    The main textual portion of the article that
+                        conveys the content.
+                        Details at:
+                        http://jats.nlm.nih.gov/publishing/tag-library/1.0/index.html?elem=body
+                                                                   -->
+<!ELEMENT  body         %body-model;                                 >
+<!ATTLIST  body
+             %body-atts;                                             >
+
+
+<!-- ============================================================= -->
+<!--                    BACK MATTER ELEMENTS                       -->
+<!-- ============================================================= -->
+
+
+<!--                    BACK MATTER MODEL                          -->
+<!--                    Content model for the Back Matter (ancillary
+                        material such as appendices) of a journal
+                        article.                                   -->
+<!ENTITY % back-model   "(label?, title*, (%doc-back-matter-mix;)* )">
+
+
+<!--                    BACK MATTER                                -->
+<!--                    Ancillary or supporting material not included
+                        as part of the main textual content of a
+                        journal article, for example appendices and
+                        acknowledgments.
+                        Details at:
+                        http://jats.nlm.nih.gov/publishing/tag-library/1.0/index.html?elem=back
+                                                                   -->
+<!ELEMENT  back         %back-model;                                 >
+<!ATTLIST  back
+             %back-atts;                                             >
+
+
+<!-- ============================================================= -->
+<!--                    SUBARTICLE                                 -->
+<!-- ============================================================= -->
+
+
+<!--                    SUBARTICLE MODEL                           -->
+<!--                    Content model for the <sub-article> element
+                                                                   -->
+<!ENTITY % sub-article-model
+                        "((front | front-stub), body?, back?,
+                          floats-group?,
+                          (sub-article* | response*) )"              >
+
+
+<!--                    SUBARTICLE                                 -->
+<!--                    An article that is completely contained
+                        inside another article. Both the article and
+                        the sub-article have their own metadata.
+                        Details at:
+                        http://jats.nlm.nih.gov/publishing/tag-library/1.0/index.html?elem=sub-article
+                                                                   -->
+<!ELEMENT  sub-article  %sub-article-model;                          >
+<!ATTLIST  sub-article
+             %sub-article-atts;                                      >
+
+
+<!--                    FRONT MODEL STUB                           -->
+<!--                    Content model for the <front-stub> element,
+                        a reduced metadata set for use in
+                        sub-articles and responses                 -->
+<!ENTITY % front-stub-model
+                       "(article-id*, article-categories?,
+                         title-group?,
+                         ( %contrib-group.class; |
+                           %aff-alternatives.class;)*,
+                         author-notes?, pub-date*,
+                         volume*, volume-id*, volume-series?,
+                         issue*, issue-id*, issue-title*,
+                         issue-sponsor*, issue-part?, 
+                         volume-issue-group*, isbn*,
+                         supplement?,
+                         ( (fpage, lpage?, page-range?) |
+                            elocation-id)?,
+                         ( %address-link.class; | product |
+                           supplementary-material)*, 
+                         history?, permissions?, self-uri*, 
+                         (%related-article.class;)*, 
+                         (%abstract.class;)*, trans-abstract*, 
+                         (%kwd-group.class;)*,
+                         funding-group*, conference*, counts?,
+                         custom-meta-group?)"                        >
+
+
+<!--                    STUB FRONT METADATA                        -->
+<!--                    A reduced metadata set for use in
+                        sub-articles and responses, which will
+                        inherit metadata not defined in the stub
+                        from the enclosing article
+                        Details at:
+                        http://jats.nlm.nih.gov/publishing/tag-library/1.0/index.html?elem=front-stub
+                                                                   -->
+<!ELEMENT  front-stub   %front-stub-model;                           >
+<!ATTLIST  front-stub 
+             %front-stub-atts;                                       >
+
+
+<!-- ============================================================= -->
+<!--                    RESPONSE ELEMENTS                          -->
+<!-- ============================================================= -->
+
+
+<!--                    RESPONSE                                   -->
+<!--                    Reply, response, or commentary concerning the
+                        journal article. In the typical case, the
+                        response is included in the same XML package
+                        as the original article, and thus attached
+                        at the end of the article proper.
+                        Details at:
+                        http://jats.nlm.nih.gov/publishing/tag-library/1.0/index.html?elem=response
+                                                                   -->
+<!ELEMENT  response     %article-short-model;                        >
+<!ATTLIST  response
+             %response-atts;                                         >
+
+
+<!-- ================== End Journal Publishing DTD =============== -->