grpc 1.26.0 → 1.30.0

data/third_party/boringssl/include/openssl/poly1305.h

@@ -1,51 +0,0 @@
-/* Copyright (c) 2014, Google Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */
-
-#ifndef OPENSSL_HEADER_POLY1305_H
-#define OPENSSL_HEADER_POLY1305_H
-
-#include <openssl/base.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-
-typedef uint8_t poly1305_state[512];
-
-// CRYPTO_poly1305_init sets up |state| so that it can be used to calculate an
-// authentication tag with the one-time key |key|. Note that |key| is a
-// one-time key and therefore there is no `reset' method because that would
-// enable several messages to be authenticated with the same key.
-OPENSSL_EXPORT void CRYPTO_poly1305_init(poly1305_state* state,
-                                         const uint8_t key[32]);
-
-// CRYPTO_poly1305_update processes |in_len| bytes from |in|. It can be called
-// zero or more times after poly1305_init.
-OPENSSL_EXPORT void CRYPTO_poly1305_update(poly1305_state* state,
-                                           const uint8_t* in,
-                                           size_t in_len);
-
-// CRYPTO_poly1305_finish completes the poly1305 calculation and writes a 16
-// byte authentication tag to |mac|. The |mac| address must be 16-byte
-// aligned.
-OPENSSL_EXPORT void CRYPTO_poly1305_finish(poly1305_state* state,
-                                           uint8_t mac[16]);
-
-
-#if defined(__cplusplus)
-}  // extern C
-#endif
-
-#endif  // OPENSSL_HEADER_POLY1305_H

data/third_party/boringssl/include/openssl/rand.h

@@ -1,125 +0,0 @@
-/* Copyright (c) 2014, Google Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */
-
-#ifndef OPENSSL_HEADER_RAND_H
-#define OPENSSL_HEADER_RAND_H
-
-#include <openssl/base.h>
-
-#if defined(__cplusplus)
-extern "C" {
-#endif
-
-
-// Random number generation.
-
-
-// RAND_bytes writes |len| bytes of random data to |buf| and returns one.
-OPENSSL_EXPORT int RAND_bytes(uint8_t *buf, size_t len);
-
-// RAND_cleanup frees any resources used by the RNG. This is not safe if other
-// threads might still be calling |RAND_bytes|.
-OPENSSL_EXPORT void RAND_cleanup(void);
-
-
-// Obscure functions.
-
-#if !defined(OPENSSL_WINDOWS)
-// RAND_set_urandom_fd causes the module to use a copy of |fd| for system
-// randomness rather opening /dev/urandom internally. The caller retains
-// ownership of |fd| and is at liberty to close it at any time. This is useful
-// if, due to a sandbox, /dev/urandom isn't available. If used, it must be
-// called before the first call to |RAND_bytes|, and it is mutually exclusive
-// with |RAND_enable_fork_unsafe_buffering|.
-//
-// |RAND_set_urandom_fd| does not buffer any entropy, so it is safe to call
-// |fork| at any time after calling |RAND_set_urandom_fd|.
-OPENSSL_EXPORT void RAND_set_urandom_fd(int fd);
-
-// RAND_enable_fork_unsafe_buffering enables efficient buffered reading of
-// /dev/urandom. It adds an overhead of a few KB of memory per thread. It must
-// be called before the first call to |RAND_bytes| and it is mutually exclusive
-// with calls to |RAND_set_urandom_fd|.
-//
-// If |fd| is non-negative then a copy of |fd| will be used rather than opening
-// /dev/urandom internally. Like |RAND_set_urandom_fd|, the caller retains
-// ownership of |fd|. If |fd| is negative then /dev/urandom will be opened and
-// any error from open(2) crashes the address space.
-//
-// It has an unusual name because the buffer is unsafe across calls to |fork|.
-// Hence, this function should never be called by libraries.
-OPENSSL_EXPORT void RAND_enable_fork_unsafe_buffering(int fd);
-#endif
-
-#if defined(BORINGSSL_UNSAFE_DETERMINISTIC_MODE)
-// RAND_reset_for_fuzzing resets the fuzzer-only deterministic RNG. This
-// function is only defined in the fuzzer-only build configuration.
-OPENSSL_EXPORT void RAND_reset_for_fuzzing(void);
-#endif
-
-
-// Deprecated functions
-
-// RAND_pseudo_bytes is a wrapper around |RAND_bytes|.
-OPENSSL_EXPORT int RAND_pseudo_bytes(uint8_t *buf, size_t len);
-
-// RAND_seed reads a single byte of random data to ensure that any file
-// descriptors etc are opened.
-OPENSSL_EXPORT void RAND_seed(const void *buf, int num);
-
-// RAND_load_file returns a nonnegative number.
-OPENSSL_EXPORT int RAND_load_file(const char *path, long num);
-
-// RAND_file_name returns NULL.
-OPENSSL_EXPORT const char *RAND_file_name(char *buf, size_t num);
-
-// RAND_add does nothing.
-OPENSSL_EXPORT void RAND_add(const void *buf, int num, double entropy);
-
-// RAND_egd returns 255.
-OPENSSL_EXPORT int RAND_egd(const char *);
-
-// RAND_poll returns one.
-OPENSSL_EXPORT int RAND_poll(void);
-
-// RAND_status returns one.
-OPENSSL_EXPORT int RAND_status(void);
-
-// rand_meth_st is typedefed to |RAND_METHOD| in base.h. It isn't used; it
-// exists only to be the return type of |RAND_SSLeay|. It's
-// external so that variables of this type can be initialized.
-struct rand_meth_st {
-  void (*seed) (const void *buf, int num);
-  int (*bytes) (uint8_t *buf, size_t num);
-  void (*cleanup) (void);
-  void (*add) (const void *buf, int num, double entropy);
-  int (*pseudorand) (uint8_t *buf, size_t num);
-  int (*status) (void);
-};
-
-// RAND_SSLeay returns a pointer to a dummy |RAND_METHOD|.
-OPENSSL_EXPORT RAND_METHOD *RAND_SSLeay(void);
-
-// RAND_get_rand_method returns |RAND_SSLeay()|.
-OPENSSL_EXPORT const RAND_METHOD *RAND_get_rand_method(void);
-
-// RAND_set_rand_method does nothing.
-OPENSSL_EXPORT void RAND_set_rand_method(const RAND_METHOD *);
-
-
-#if defined(__cplusplus)
-}  // extern C
-#endif
-
-#endif  // OPENSSL_HEADER_RAND_H

data/third_party/boringssl/include/openssl/rsa.h

@@ -1,787 +0,0 @@
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.] */
-
-#ifndef OPENSSL_HEADER_RSA_H
-#define OPENSSL_HEADER_RSA_H
-
-#include <openssl/base.h>
-
-#include <openssl/engine.h>
-#include <openssl/ex_data.h>
-#include <openssl/thread.h>
-
-#if defined(__cplusplus)
-extern "C" {
-#endif
-
-
-// rsa.h contains functions for handling encryption and signature using RSA.
-
-
-// Allocation and destruction.
-//
-// An |RSA| object represents a public or private RSA key. A given object may be
-// used concurrently on multiple threads by non-mutating functions, provided no
-// other thread is concurrently calling a mutating function. Unless otherwise
-// documented, functions which take a |const| pointer are non-mutating and
-// functions which take a non-|const| pointer are mutating.
-
-// RSA_new returns a new, empty |RSA| object or NULL on error.
-OPENSSL_EXPORT RSA *RSA_new(void);
-
-// RSA_new_method acts the same as |RSA_new| but takes an explicit |ENGINE|.
-OPENSSL_EXPORT RSA *RSA_new_method(const ENGINE *engine);
-
-// RSA_free decrements the reference count of |rsa| and frees it if the
-// reference count drops to zero.
-OPENSSL_EXPORT void RSA_free(RSA *rsa);
-
-// RSA_up_ref increments the reference count of |rsa| and returns one. It does
-// not mutate |rsa| for thread-safety purposes and may be used concurrently.
-OPENSSL_EXPORT int RSA_up_ref(RSA *rsa);
-
-
-// Properties.
-
-// RSA_bits returns the size of |rsa|, in bits.
-OPENSSL_EXPORT unsigned RSA_bits(const RSA *rsa);
-
-// RSA_get0_key sets |*out_n|, |*out_e|, and |*out_d|, if non-NULL, to |rsa|'s
-// modulus, public exponent, and private exponent, respectively. If |rsa| is a
-// public key, the private exponent will be set to NULL.
-OPENSSL_EXPORT void RSA_get0_key(const RSA *rsa, const BIGNUM **out_n,
-                                 const BIGNUM **out_e, const BIGNUM **out_d);
-
-// RSA_get0_factors sets |*out_p| and |*out_q|, if non-NULL, to |rsa|'s prime
-// factors. If |rsa| is a public key, they will be set to NULL.
-OPENSSL_EXPORT void RSA_get0_factors(const RSA *rsa, const BIGNUM **out_p,
-                                     const BIGNUM **out_q);
-
-// RSA_get0_crt_params sets |*out_dmp1|, |*out_dmq1|, and |*out_iqmp|, if
-// non-NULL, to |rsa|'s CRT parameters. These are d (mod p-1), d (mod q-1) and
-// q^-1 (mod p), respectively. If |rsa| is a public key, each parameter will be
-// set to NULL.
-OPENSSL_EXPORT void RSA_get0_crt_params(const RSA *rsa, const BIGNUM **out_dmp1,
-                                        const BIGNUM **out_dmq1,
-                                        const BIGNUM **out_iqmp);
-
-// RSA_set0_key sets |rsa|'s modulus, public exponent, and private exponent to
-// |n|, |e|, and |d| respectively, if non-NULL. On success, it takes ownership
-// of each argument and returns one. Otherwise, it returns zero.
-//
-// |d| may be NULL, but |n| and |e| must either be non-NULL or already
-// configured on |rsa|.
-//
-// It is an error to call this function after |rsa| has been used for a
-// cryptographic operation. Construct a new |RSA| object instead.
-OPENSSL_EXPORT int RSA_set0_key(RSA *rsa, BIGNUM *n, BIGNUM *e, BIGNUM *d);
-
-// RSA_set0_factors sets |rsa|'s prime factors to |p| and |q|, if non-NULL, and
-// takes ownership of them. On success, it takes ownership of each argument and
-// returns one. Otherwise, it returns zero.
-//
-// Each argument must either be non-NULL or already configured on |rsa|.
-//
-// It is an error to call this function after |rsa| has been used for a
-// cryptographic operation. Construct a new |RSA| object instead.
-OPENSSL_EXPORT int RSA_set0_factors(RSA *rsa, BIGNUM *p, BIGNUM *q);
-
-// RSA_set0_crt_params sets |rsa|'s CRT parameters to |dmp1|, |dmq1|, and
-// |iqmp|, if non-NULL, and takes ownership of them. On success, it takes
-// ownership of its parameters and returns one. Otherwise, it returns zero.
-//
-// Each argument must either be non-NULL or already configured on |rsa|.
-//
-// It is an error to call this function after |rsa| has been used for a
-// cryptographic operation. Construct a new |RSA| object instead.
-OPENSSL_EXPORT int RSA_set0_crt_params(RSA *rsa, BIGNUM *dmp1, BIGNUM *dmq1,
-                                       BIGNUM *iqmp);
-
-
-// Key generation.
-
-// RSA_generate_key_ex generates a new RSA key where the modulus has size
-// |bits| and the public exponent is |e|. If unsure, |RSA_F4| is a good value
-// for |e|. If |cb| is not NULL then it is called during the key generation
-// process. In addition to the calls documented for |BN_generate_prime_ex|, it
-// is called with event=2 when the n'th prime is rejected as unsuitable and
-// with event=3 when a suitable value for |p| is found.
-//
-// It returns one on success or zero on error.
-OPENSSL_EXPORT int RSA_generate_key_ex(RSA *rsa, int bits, const BIGNUM *e,
-                                       BN_GENCB *cb);
-
-// RSA_generate_key_fips behaves like |RSA_generate_key_ex| but performs
-// additional checks for FIPS compliance. The public exponent is always 65537
-// and |bits| must be either 2048 or 3072.
-OPENSSL_EXPORT int RSA_generate_key_fips(RSA *rsa, int bits, BN_GENCB *cb);
-
-
-// Encryption / Decryption
-//
-// These functions are considered non-mutating for thread-safety purposes and
-// may be used concurrently.
-
-// RSA_PKCS1_PADDING denotes PKCS#1 v1.5 padding. When used with encryption,
-// this is RSAES-PKCS1-v1_5. When used with signing, this is RSASSA-PKCS1-v1_5.
-#define RSA_PKCS1_PADDING 1
-
-// RSA_NO_PADDING denotes a raw RSA operation.
-#define RSA_NO_PADDING 3
-
-// RSA_PKCS1_OAEP_PADDING denotes the RSAES-OAEP encryption scheme.
-#define RSA_PKCS1_OAEP_PADDING 4
-
-// RSA_PKCS1_PSS_PADDING denotes the RSASSA-PSS signature scheme. This value may
-// not be passed into |RSA_sign_raw|, only |EVP_PKEY_CTX_set_rsa_padding|. See
-// also |RSA_sign_pss_mgf1| and |RSA_verify_pss_mgf1|.
-#define RSA_PKCS1_PSS_PADDING 6
-
-// RSA_encrypt encrypts |in_len| bytes from |in| to the public key from |rsa|
-// and writes, at most, |max_out| bytes of encrypted data to |out|. The
-// |max_out| argument must be, at least, |RSA_size| in order to ensure success.
-//
-// It returns 1 on success or zero on error.
-//
-// The |padding| argument must be one of the |RSA_*_PADDING| values. If in
-// doubt, use |RSA_PKCS1_OAEP_PADDING| for new protocols but
-// |RSA_PKCS1_PADDING| is most common.
-OPENSSL_EXPORT int RSA_encrypt(RSA *rsa, size_t *out_len, uint8_t *out,
-                               size_t max_out, const uint8_t *in, size_t in_len,
-                               int padding);
-
-// RSA_decrypt decrypts |in_len| bytes from |in| with the private key from
-// |rsa| and writes, at most, |max_out| bytes of plaintext to |out|. The
-// |max_out| argument must be, at least, |RSA_size| in order to ensure success.
-//
-// It returns 1 on success or zero on error.
-//
-// The |padding| argument must be one of the |RSA_*_PADDING| values. If in
-// doubt, use |RSA_PKCS1_OAEP_PADDING| for new protocols.
-//
-// Passing |RSA_PKCS1_PADDING| into this function is deprecated and insecure. If
-// implementing a protocol using RSAES-PKCS1-V1_5, use |RSA_NO_PADDING| and then
-// check padding in constant-time combined with a swap to a random session key
-// or other mitigation. See "Chosen Ciphertext Attacks Against Protocols Based
-// on the RSA Encryption Standard PKCS #1", Daniel Bleichenbacher, Advances in
-// Cryptology (Crypto '98).
-OPENSSL_EXPORT int RSA_decrypt(RSA *rsa, size_t *out_len, uint8_t *out,
-                               size_t max_out, const uint8_t *in, size_t in_len,
-                               int padding);
-
-// RSA_public_encrypt encrypts |flen| bytes from |from| to the public key in
-// |rsa| and writes the encrypted data to |to|. The |to| buffer must have at
-// least |RSA_size| bytes of space. It returns the number of bytes written, or
-// -1 on error. The |padding| argument must be one of the |RSA_*_PADDING|
-// values. If in doubt, use |RSA_PKCS1_OAEP_PADDING| for new protocols but
-// |RSA_PKCS1_PADDING| is most common.
-//
-// WARNING: this function is dangerous because it breaks the usual return value
-// convention. Use |RSA_encrypt| instead.
-OPENSSL_EXPORT int RSA_public_encrypt(size_t flen, const uint8_t *from,
-                                      uint8_t *to, RSA *rsa, int padding);
-
-// RSA_private_decrypt decrypts |flen| bytes from |from| with the public key in
-// |rsa| and writes the plaintext to |to|. The |to| buffer must have at least
-// |RSA_size| bytes of space. It returns the number of bytes written, or -1 on
-// error. The |padding| argument must be one of the |RSA_*_PADDING| values. If
-// in doubt, use |RSA_PKCS1_OAEP_PADDING| for new protocols. Passing
-// |RSA_PKCS1_PADDING| into this function is deprecated and insecure. See
-// |RSA_decrypt|.
-//
-// WARNING: this function is dangerous because it breaks the usual return value
-// convention. Use |RSA_decrypt| instead.
-OPENSSL_EXPORT int RSA_private_decrypt(size_t flen, const uint8_t *from,
-                                       uint8_t *to, RSA *rsa, int padding);
-
-
-// Signing / Verification
-//
-// These functions are considered non-mutating for thread-safety purposes and
-// may be used concurrently.
-
-// RSA_sign signs |in_len| bytes of digest from |in| with |rsa| using
-// RSASSA-PKCS1-v1_5. It writes, at most, |RSA_size(rsa)| bytes to |out|. On
-// successful return, the actual number of bytes written is written to
-// |*out_len|.
-//
-// The |hash_nid| argument identifies the hash function used to calculate |in|
-// and is embedded in the resulting signature. For example, it might be
-// |NID_sha256|.
-//
-// It returns 1 on success and zero on error.
-OPENSSL_EXPORT int RSA_sign(int hash_nid, const uint8_t *in,
-                            unsigned int in_len, uint8_t *out,
-                            unsigned int *out_len, RSA *rsa);
-
-// RSA_sign_pss_mgf1 signs |in_len| bytes from |in| with the public key from
-// |rsa| using RSASSA-PSS with MGF1 as the mask generation function. It writes,
-// at most, |max_out| bytes of signature data to |out|. The |max_out| argument
-// must be, at least, |RSA_size| in order to ensure success. It returns 1 on
-// success or zero on error.
-//
-// The |md| and |mgf1_md| arguments identify the hash used to calculate |msg|
-// and the MGF1 hash, respectively. If |mgf1_md| is NULL, |md| is
-// used.
-//
-// |salt_len| specifies the expected salt length in bytes. If |salt_len| is -1,
-// then the salt length is the same as the hash length. If -2, then the salt
-// length is maximal given the size of |rsa|. If unsure, use -1.
-OPENSSL_EXPORT int RSA_sign_pss_mgf1(RSA *rsa, size_t *out_len, uint8_t *out,
-                                     size_t max_out, const uint8_t *in,
-                                     size_t in_len, const EVP_MD *md,
-                                     const EVP_MD *mgf1_md, int salt_len);
-
-// RSA_sign_raw signs |in_len| bytes from |in| with the public key from |rsa|
-// and writes, at most, |max_out| bytes of signature data to |out|. The
-// |max_out| argument must be, at least, |RSA_size| in order to ensure success.
-//
-// It returns 1 on success or zero on error.
-//
-// The |padding| argument must be one of the |RSA_*_PADDING| values. If in
-// doubt, |RSA_PKCS1_PADDING| is the most common but |RSA_PKCS1_PSS_PADDING|
-// (via |RSA_sign_pss_mgf1| or the |EVP_PKEY| interface) is preferred for new
-// protocols.
-OPENSSL_EXPORT int RSA_sign_raw(RSA *rsa, size_t *out_len, uint8_t *out,
-                                size_t max_out, const uint8_t *in,
-                                size_t in_len, int padding);
-
-// RSA_verify verifies that |sig_len| bytes from |sig| are a valid,
-// RSASSA-PKCS1-v1_5 signature of |msg_len| bytes at |msg| by |rsa|.
-//
-// The |hash_nid| argument identifies the hash function used to calculate |msg|
-// and is embedded in the resulting signature in order to prevent hash
-// confusion attacks. For example, it might be |NID_sha256|.
-//
-// It returns one if the signature is valid and zero otherwise.
-//
-// WARNING: this differs from the original, OpenSSL function which additionally
-// returned -1 on error.
-OPENSSL_EXPORT int RSA_verify(int hash_nid, const uint8_t *msg, size_t msg_len,
-                              const uint8_t *sig, size_t sig_len, RSA *rsa);
-
-// RSA_verify_pss_mgf1 verifies that |sig_len| bytes from |sig| are a valid,
-// RSASSA-PSS signature of |msg_len| bytes at |msg| by |rsa|. It returns one if
-// the signature is valid and zero otherwise. MGF1 is used as the mask
-// generation function.
-//
-// The |md| and |mgf1_md| arguments identify the hash used to calculate |msg|
-// and the MGF1 hash, respectively. If |mgf1_md| is NULL, |md| is
-// used. |salt_len| specifies the expected salt length in bytes.
-//
-// If |salt_len| is -1, then the salt length is the same as the hash length. If
-// -2, then the salt length is recovered and all values accepted. If unsure, use
-// -1.
-OPENSSL_EXPORT int RSA_verify_pss_mgf1(RSA *rsa, const uint8_t *msg,
-                                       size_t msg_len, const EVP_MD *md,
-                                       const EVP_MD *mgf1_md, int salt_len,
-                                       const uint8_t *sig, size_t sig_len);
-
-// RSA_verify_raw verifies |in_len| bytes of signature from |in| using the
-// public key from |rsa| and writes, at most, |max_out| bytes of plaintext to
-// |out|. The |max_out| argument must be, at least, |RSA_size| in order to
-// ensure success.
-//
-// It returns 1 on success or zero on error.
-//
-// The |padding| argument must be one of the |RSA_*_PADDING| values. If in
-// doubt, |RSA_PKCS1_PADDING| is the most common but |RSA_PKCS1_PSS_PADDING|
-// (via |RSA_verify_pss_mgf1| or the |EVP_PKEY| interface) is preferred for new
-// protocols.
-OPENSSL_EXPORT int RSA_verify_raw(RSA *rsa, size_t *out_len, uint8_t *out,
-                                  size_t max_out, const uint8_t *in,
-                                  size_t in_len, int padding);
-
-// RSA_private_encrypt encrypts |flen| bytes from |from| with the private key in
-// |rsa| and writes the encrypted data to |to|. The |to| buffer must have at
-// least |RSA_size| bytes of space. It returns the number of bytes written, or
-// -1 on error. The |padding| argument must be one of the |RSA_*_PADDING|
-// values. If in doubt, |RSA_PKCS1_PADDING| is the most common but
-// |RSA_PKCS1_PSS_PADDING| (via the |EVP_PKEY| interface) is preferred for new
-// protocols.
-//
-// WARNING: this function is dangerous because it breaks the usual return value
-// convention. Use |RSA_sign_raw| instead.
-OPENSSL_EXPORT int RSA_private_encrypt(size_t flen, const uint8_t *from,
-                                       uint8_t *to, RSA *rsa, int padding);
-
-// RSA_public_decrypt verifies |flen| bytes of signature from |from| using the
-// public key in |rsa| and writes the plaintext to |to|. The |to| buffer must
-// have at least |RSA_size| bytes of space. It returns the number of bytes
-// written, or -1 on error. The |padding| argument must be one of the
-// |RSA_*_PADDING| values. If in doubt, |RSA_PKCS1_PADDING| is the most common
-// but |RSA_PKCS1_PSS_PADDING| (via the |EVP_PKEY| interface) is preferred for
-// new protocols.
-//
-// WARNING: this function is dangerous because it breaks the usual return value
-// convention. Use |RSA_verify_raw| instead.
-OPENSSL_EXPORT int RSA_public_decrypt(size_t flen, const uint8_t *from,
-                                      uint8_t *to, RSA *rsa, int padding);
-
-
-// Utility functions.
-
-// RSA_size returns the number of bytes in the modulus, which is also the size
-// of a signature or encrypted value using |rsa|.
-OPENSSL_EXPORT unsigned RSA_size(const RSA *rsa);
-
-// RSA_is_opaque returns one if |rsa| is opaque and doesn't expose its key
-// material. Otherwise it returns zero.
-OPENSSL_EXPORT int RSA_is_opaque(const RSA *rsa);
-
-// RSAPublicKey_dup allocates a fresh |RSA| and copies the public key from
-// |rsa| into it. It returns the fresh |RSA| object, or NULL on error.
-OPENSSL_EXPORT RSA *RSAPublicKey_dup(const RSA *rsa);
-
-// RSAPrivateKey_dup allocates a fresh |RSA| and copies the private key from
-// |rsa| into it. It returns the fresh |RSA| object, or NULL on error.
-OPENSSL_EXPORT RSA *RSAPrivateKey_dup(const RSA *rsa);
-
-// RSA_check_key performs basic validity tests on |rsa|. It returns one if
-// they pass and zero otherwise. Opaque keys and public keys always pass. If it
-// returns zero then a more detailed error is available on the error queue.
-OPENSSL_EXPORT int RSA_check_key(const RSA *rsa);
-
-// RSA_check_fips performs public key validity tests on |key|. It returns one if
-// they pass and zero otherwise. Opaque keys always fail. This function does not
-// mutate |rsa| for thread-safety purposes and may be used concurrently.
-OPENSSL_EXPORT int RSA_check_fips(RSA *key);
-
-// RSA_verify_PKCS1_PSS_mgf1 verifies that |EM| is a correct PSS padding of
-// |mHash|, where |mHash| is a digest produced by |Hash|. |EM| must point to
-// exactly |RSA_size(rsa)| bytes of data. The |mgf1Hash| argument specifies the
-// hash function for generating the mask. If NULL, |Hash| is used. The |sLen|
-// argument specifies the expected salt length in bytes. If |sLen| is -1 then
-// the salt length is the same as the hash length. If -2, then the salt length
-// is recovered and all values accepted.
-//
-// If unsure, use -1.
-//
-// It returns one on success or zero on error.
-//
-// This function implements only the low-level padding logic. Use
-// |RSA_verify_pss_mgf1| instead.
-OPENSSL_EXPORT int RSA_verify_PKCS1_PSS_mgf1(const RSA *rsa,
-                                             const uint8_t *mHash,
-                                             const EVP_MD *Hash,
-                                             const EVP_MD *mgf1Hash,
-                                             const uint8_t *EM, int sLen);
-
-// RSA_padding_add_PKCS1_PSS_mgf1 writes a PSS padding of |mHash| to |EM|,
-// where |mHash| is a digest produced by |Hash|. |RSA_size(rsa)| bytes of
-// output will be written to |EM|. The |mgf1Hash| argument specifies the hash
-// function for generating the mask. If NULL, |Hash| is used. The |sLen|
-// argument specifies the expected salt length in bytes. If |sLen| is -1 then
-// the salt length is the same as the hash length. If -2, then the salt length
-// is maximal given the space in |EM|.
-//
-// It returns one on success or zero on error.
-//
-// This function implements only the low-level padding logic. Use
-// |RSA_sign_pss_mgf1| instead.
-OPENSSL_EXPORT int RSA_padding_add_PKCS1_PSS_mgf1(const RSA *rsa, uint8_t *EM,
-                                                  const uint8_t *mHash,
-                                                  const EVP_MD *Hash,
-                                                  const EVP_MD *mgf1Hash,
-                                                  int sLen);
-
-// RSA_padding_add_PKCS1_OAEP_mgf1 writes an OAEP padding of |from| to |to|
-// with the given parameters and hash functions. If |md| is NULL then SHA-1 is
-// used. If |mgf1md| is NULL then the value of |md| is used (which means SHA-1
-// if that, in turn, is NULL).
-//
-// It returns one on success or zero on error.
-OPENSSL_EXPORT int RSA_padding_add_PKCS1_OAEP_mgf1(
-    uint8_t *to, size_t to_len, const uint8_t *from, size_t from_len,
-    const uint8_t *param, size_t param_len, const EVP_MD *md,
-    const EVP_MD *mgf1md);
-
-// RSA_add_pkcs1_prefix builds a version of |msg| prefixed with the DigestInfo
-// header for the given hash function and sets |out_msg| to point to it. On
-// successful return, if |*is_alloced| is one, the caller must release
-// |*out_msg| with |OPENSSL_free|.
-OPENSSL_EXPORT int RSA_add_pkcs1_prefix(uint8_t **out_msg, size_t *out_msg_len,
-                                        int *is_alloced, int hash_nid,
-                                        const uint8_t *msg, size_t msg_len);
-
-
-// ASN.1 functions.
-
-// RSA_parse_public_key parses a DER-encoded RSAPublicKey structure (RFC 3447)
-// from |cbs| and advances |cbs|. It returns a newly-allocated |RSA| or NULL on
-// error.
-OPENSSL_EXPORT RSA *RSA_parse_public_key(CBS *cbs);
-
-// RSA_public_key_from_bytes parses |in| as a DER-encoded RSAPublicKey structure
-// (RFC 3447). It returns a newly-allocated |RSA| or NULL on error.
-OPENSSL_EXPORT RSA *RSA_public_key_from_bytes(const uint8_t *in, size_t in_len);
-
-// RSA_marshal_public_key marshals |rsa| as a DER-encoded RSAPublicKey structure
-// (RFC 3447) and appends the result to |cbb|. It returns one on success and
-// zero on failure.
-OPENSSL_EXPORT int RSA_marshal_public_key(CBB *cbb, const RSA *rsa);
-
-// RSA_public_key_to_bytes marshals |rsa| as a DER-encoded RSAPublicKey
-// structure (RFC 3447) and, on success, sets |*out_bytes| to a newly allocated
-// buffer containing the result and returns one. Otherwise, it returns zero. The
-// result should be freed with |OPENSSL_free|.
-OPENSSL_EXPORT int RSA_public_key_to_bytes(uint8_t **out_bytes, size_t *out_len,
-                                           const RSA *rsa);
-
-// RSA_parse_private_key parses a DER-encoded RSAPrivateKey structure (RFC 3447)
-// from |cbs| and advances |cbs|. It returns a newly-allocated |RSA| or NULL on
-// error.
-OPENSSL_EXPORT RSA *RSA_parse_private_key(CBS *cbs);
-
-// RSA_private_key_from_bytes parses |in| as a DER-encoded RSAPrivateKey
-// structure (RFC 3447). It returns a newly-allocated |RSA| or NULL on error.
-OPENSSL_EXPORT RSA *RSA_private_key_from_bytes(const uint8_t *in,
-                                               size_t in_len);
-
-// RSA_marshal_private_key marshals |rsa| as a DER-encoded RSAPrivateKey
-// structure (RFC 3447) and appends the result to |cbb|. It returns one on
-// success and zero on failure.
-OPENSSL_EXPORT int RSA_marshal_private_key(CBB *cbb, const RSA *rsa);
-
-// RSA_private_key_to_bytes marshals |rsa| as a DER-encoded RSAPrivateKey
-// structure (RFC 3447) and, on success, sets |*out_bytes| to a newly allocated
-// buffer containing the result and returns one. Otherwise, it returns zero. The
-// result should be freed with |OPENSSL_free|.
-OPENSSL_EXPORT int RSA_private_key_to_bytes(uint8_t **out_bytes,
-                                            size_t *out_len, const RSA *rsa);
-
-
-// ex_data functions.
-//
-// See |ex_data.h| for details.
-
-OPENSSL_EXPORT int RSA_get_ex_new_index(long argl, void *argp,
-                                        CRYPTO_EX_unused *unused,
-                                        CRYPTO_EX_dup *dup_unused,
-                                        CRYPTO_EX_free *free_func);
-OPENSSL_EXPORT int RSA_set_ex_data(RSA *rsa, int idx, void *arg);
-OPENSSL_EXPORT void *RSA_get_ex_data(const RSA *rsa, int idx);
-
-
-// Flags.
-
-// RSA_FLAG_OPAQUE specifies that this RSA_METHOD does not expose its key
-// material. This may be set if, for instance, it is wrapping some other crypto
-// API, like a platform key store.
-#define RSA_FLAG_OPAQUE 1
-
-// RSA_FLAG_NO_BLINDING disables blinding of private operations, which is a
-// dangerous thing to do. It is deprecated and should not be used. It will
-// be ignored whenever possible.
-//
-// This flag must be used if a key without the public exponent |e| is used for
-// private key operations; avoid using such keys whenever possible.
-#define RSA_FLAG_NO_BLINDING 8
-
-// RSA_FLAG_EXT_PKEY is deprecated and ignored.
-#define RSA_FLAG_EXT_PKEY 0x20
-
-
-// RSA public exponent values.
-
-#define RSA_3 0x3
-#define RSA_F4 0x10001
-
-
-// Deprecated functions.
-
-#define RSA_METHOD_FLAG_NO_CHECK RSA_FLAG_OPAQUE
-
-// RSA_flags returns the flags for |rsa|. These are a bitwise OR of |RSA_FLAG_*|
-// constants.
-OPENSSL_EXPORT int RSA_flags(const RSA *rsa);
-
-// RSA_blinding_on returns one.
-OPENSSL_EXPORT int RSA_blinding_on(RSA *rsa, BN_CTX *ctx);
-
-// RSA_generate_key behaves like |RSA_generate_key_ex|, which is what you
-// should use instead. It returns NULL on error, or a newly-allocated |RSA| on
-// success. This function is provided for compatibility only. The |callback|
-// and |cb_arg| parameters must be NULL.
-OPENSSL_EXPORT RSA *RSA_generate_key(int bits, unsigned long e, void *callback,
-                                     void *cb_arg);
-
-// d2i_RSAPublicKey parses an ASN.1, DER-encoded, RSA public key from |len|
-// bytes at |*inp|. If |out| is not NULL then, on exit, a pointer to the result
-// is in |*out|. Note that, even if |*out| is already non-NULL on entry, it
-// will not be written to. Rather, a fresh |RSA| is allocated and the previous
-// one is freed. On successful exit, |*inp| is advanced past the DER structure.
-// It returns the result or NULL on error.
-OPENSSL_EXPORT RSA *d2i_RSAPublicKey(RSA **out, const uint8_t **inp, long len);
-
-// i2d_RSAPublicKey marshals |in| to an ASN.1, DER structure. If |outp| is not
-// NULL then the result is written to |*outp| and |*outp| is advanced just past
-// the output. It returns the number of bytes in the result, whether written or
-// not, or a negative value on error.
-OPENSSL_EXPORT int i2d_RSAPublicKey(const RSA *in, uint8_t **outp);
-
-// d2i_RSAPrivateKey parses an ASN.1, DER-encoded, RSA private key from |len|
-// bytes at |*inp|. If |out| is not NULL then, on exit, a pointer to the result
-// is in |*out|. Note that, even if |*out| is already non-NULL on entry, it
-// will not be written to. Rather, a fresh |RSA| is allocated and the previous
-// one is freed. On successful exit, |*inp| is advanced past the DER structure.
-// It returns the result or NULL on error.
-OPENSSL_EXPORT RSA *d2i_RSAPrivateKey(RSA **out, const uint8_t **inp, long len);
-
-// i2d_RSAPrivateKey marshals |in| to an ASN.1, DER structure. If |outp| is not
-// NULL then the result is written to |*outp| and |*outp| is advanced just past
-// the output. It returns the number of bytes in the result, whether written or
-// not, or a negative value on error.
-OPENSSL_EXPORT int i2d_RSAPrivateKey(const RSA *in, uint8_t **outp);
-
-// RSA_padding_add_PKCS1_PSS acts like |RSA_padding_add_PKCS1_PSS_mgf1| but the
-// |mgf1Hash| parameter of the latter is implicitly set to |Hash|.
-//
-// This function implements only the low-level padding logic. Use
-// |RSA_sign_pss_mgf1| instead.
-OPENSSL_EXPORT int RSA_padding_add_PKCS1_PSS(const RSA *rsa, uint8_t *EM,
-                                             const uint8_t *mHash,
-                                             const EVP_MD *Hash, int sLen);
-
-// RSA_verify_PKCS1_PSS acts like |RSA_verify_PKCS1_PSS_mgf1| but the
-// |mgf1Hash| parameter of the latter is implicitly set to |Hash|.
-//
-// This function implements only the low-level padding logic. Use
-// |RSA_verify_pss_mgf1| instead.
-OPENSSL_EXPORT int RSA_verify_PKCS1_PSS(const RSA *rsa, const uint8_t *mHash,
-                                        const EVP_MD *Hash, const uint8_t *EM,
-                                        int sLen);
-
-// RSA_padding_add_PKCS1_OAEP acts like |RSA_padding_add_PKCS1_OAEP_mgf1| but
-// the |md| and |mgf1md| parameters of the latter are implicitly set to NULL,
-// which means SHA-1.
-OPENSSL_EXPORT int RSA_padding_add_PKCS1_OAEP(uint8_t *to, size_t to_len,
-                                              const uint8_t *from,
-                                              size_t from_len,
-                                              const uint8_t *param,
-                                              size_t param_len);
-
-// RSA_print prints a textual representation of |rsa| to |bio|. It returns one
-// on success or zero otherwise.
-OPENSSL_EXPORT int RSA_print(BIO *bio, const RSA *rsa, int indent);
-
-
-struct rsa_meth_st {
-  struct openssl_method_common_st common;
-
-  void *app_data;
-
-  int (*init)(RSA *rsa);
-  int (*finish)(RSA *rsa);
-
-  // size returns the size of the RSA modulus in bytes.
-  size_t (*size)(const RSA *rsa);
-
-  int (*sign)(int type, const uint8_t *m, unsigned int m_length,
-              uint8_t *sigret, unsigned int *siglen, const RSA *rsa);
-
-  // These functions mirror the |RSA_*| functions of the same name.
-  int (*sign_raw)(RSA *rsa, size_t *out_len, uint8_t *out, size_t max_out,
-                  const uint8_t *in, size_t in_len, int padding);
-  int (*decrypt)(RSA *rsa, size_t *out_len, uint8_t *out, size_t max_out,
-                 const uint8_t *in, size_t in_len, int padding);
-
-  // private_transform takes a big-endian integer from |in|, calculates the
-  // d'th power of it, modulo the RSA modulus and writes the result as a
-  // big-endian integer to |out|. Both |in| and |out| are |len| bytes long and
-  // |len| is always equal to |RSA_size(rsa)|. If the result of the transform
-  // can be represented in fewer than |len| bytes, then |out| must be zero
-  // padded on the left.
-  //
-  // It returns one on success and zero otherwise.
-  //
-  // RSA decrypt and sign operations will call this, thus an ENGINE might wish
-  // to override it in order to avoid having to implement the padding
-  // functionality demanded by those, higher level, operations.
-  int (*private_transform)(RSA *rsa, uint8_t *out, const uint8_t *in,
-                           size_t len);
-
-  int flags;
-};
-
-
-// Private functions.
-
-typedef struct bn_blinding_st BN_BLINDING;
-
-struct rsa_st {
-  RSA_METHOD *meth;
-
-  // Access to the following fields was historically allowed, but
-  // deprecated. Use |RSA_get0_*| and |RSA_set0_*| instead. Access to all other
-  // fields is forbidden and will cause threading errors.
-  BIGNUM *n;
-  BIGNUM *e;
-  BIGNUM *d;
-  BIGNUM *p;
-  BIGNUM *q;
-  BIGNUM *dmp1;
-  BIGNUM *dmq1;
-  BIGNUM *iqmp;
-
-  // be careful using this if the RSA structure is shared
-  CRYPTO_EX_DATA ex_data;
-  CRYPTO_refcount_t references;
-  int flags;
-
-  CRYPTO_MUTEX lock;
-
-  // Used to cache montgomery values. The creation of these values is protected
-  // by |lock|.
-  BN_MONT_CTX *mont_n;
-  BN_MONT_CTX *mont_p;
-  BN_MONT_CTX *mont_q;
-
-  // The following fields are copies of |d|, |dmp1|, and |dmq1|, respectively,
-  // but with the correct widths to prevent side channels. These must use
-  // separate copies due to threading concerns caused by OpenSSL's API
-  // mistakes. See https://github.com/openssl/openssl/issues/5158 and
-  // the |freeze_private_key| implementation.
-  BIGNUM *d_fixed, *dmp1_fixed, *dmq1_fixed;
-
-  // inv_small_mod_large_mont is q^-1 mod p in Montgomery form, using |mont_p|,
-  // if |p| >= |q|. Otherwise, it is p^-1 mod q in Montgomery form, using
-  // |mont_q|.
-  BIGNUM *inv_small_mod_large_mont;
-
-  // num_blindings contains the size of the |blindings| and |blindings_inuse|
-  // arrays. This member and the |blindings_inuse| array are protected by
-  // |lock|.
-  unsigned num_blindings;
-  // blindings is an array of BN_BLINDING structures that can be reserved by a
-  // thread by locking |lock| and changing the corresponding element in
-  // |blindings_inuse| from 0 to 1.
-  BN_BLINDING **blindings;
-  unsigned char *blindings_inuse;
-
-  // private_key_frozen is one if the key has been used for a private key
-  // operation and may no longer be mutated.
-  unsigned private_key_frozen:1;
-};
-
-
-#if defined(__cplusplus)
-}  // extern C
-
-extern "C++" {
-
-BSSL_NAMESPACE_BEGIN
-
-BORINGSSL_MAKE_DELETER(RSA, RSA_free)
-BORINGSSL_MAKE_UP_REF(RSA, RSA_up_ref)
-
-BSSL_NAMESPACE_END
-
-}  // extern C++
-
-#endif
-
-#define RSA_R_BAD_ENCODING 100
-#define RSA_R_BAD_E_VALUE 101
-#define RSA_R_BAD_FIXED_HEADER_DECRYPT 102
-#define RSA_R_BAD_PAD_BYTE_COUNT 103
-#define RSA_R_BAD_RSA_PARAMETERS 104
-#define RSA_R_BAD_SIGNATURE 105
-#define RSA_R_BAD_VERSION 106
-#define RSA_R_BLOCK_TYPE_IS_NOT_01 107
-#define RSA_R_BN_NOT_INITIALIZED 108
-#define RSA_R_CANNOT_RECOVER_MULTI_PRIME_KEY 109
-#define RSA_R_CRT_PARAMS_ALREADY_GIVEN 110
-#define RSA_R_CRT_VALUES_INCORRECT 111
-#define RSA_R_DATA_LEN_NOT_EQUAL_TO_MOD_LEN 112
-#define RSA_R_DATA_TOO_LARGE 113
-#define RSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE 114
-#define RSA_R_DATA_TOO_LARGE_FOR_MODULUS 115
-#define RSA_R_DATA_TOO_SMALL 116
-#define RSA_R_DATA_TOO_SMALL_FOR_KEY_SIZE 117
-#define RSA_R_DIGEST_TOO_BIG_FOR_RSA_KEY 118
-#define RSA_R_D_E_NOT_CONGRUENT_TO_1 119
-#define RSA_R_EMPTY_PUBLIC_KEY 120
-#define RSA_R_ENCODE_ERROR 121
-#define RSA_R_FIRST_OCTET_INVALID 122
-#define RSA_R_INCONSISTENT_SET_OF_CRT_VALUES 123
-#define RSA_R_INTERNAL_ERROR 124
-#define RSA_R_INVALID_MESSAGE_LENGTH 125
-#define RSA_R_KEY_SIZE_TOO_SMALL 126
-#define RSA_R_LAST_OCTET_INVALID 127
-#define RSA_R_MODULUS_TOO_LARGE 128
-#define RSA_R_MUST_HAVE_AT_LEAST_TWO_PRIMES 129
-#define RSA_R_NO_PUBLIC_EXPONENT 130
-#define RSA_R_NULL_BEFORE_BLOCK_MISSING 131
-#define RSA_R_N_NOT_EQUAL_P_Q 132
-#define RSA_R_OAEP_DECODING_ERROR 133
-#define RSA_R_ONLY_ONE_OF_P_Q_GIVEN 134
-#define RSA_R_OUTPUT_BUFFER_TOO_SMALL 135
-#define RSA_R_PADDING_CHECK_FAILED 136
-#define RSA_R_PKCS_DECODING_ERROR 137
-#define RSA_R_SLEN_CHECK_FAILED 138
-#define RSA_R_SLEN_RECOVERY_FAILED 139
-#define RSA_R_TOO_LONG 140
-#define RSA_R_TOO_MANY_ITERATIONS 141
-#define RSA_R_UNKNOWN_ALGORITHM_TYPE 142
-#define RSA_R_UNKNOWN_PADDING_TYPE 143
-#define RSA_R_VALUE_MISSING 144
-#define RSA_R_WRONG_SIGNATURE_LENGTH 145
-#define RSA_R_PUBLIC_KEY_VALIDATION_FAILED 146
-#define RSA_R_D_OUT_OF_RANGE 147
-#define RSA_R_BLOCK_TYPE_IS_NOT_02 148
-
-#endif  // OPENSSL_HEADER_RSA_H