grpc 1.26.0 → 1.30.0

data/third_party/boringssl/crypto/fipsmodule/ec/felem.c

@@ -1,82 +0,0 @@
-/* Copyright (c) 2018, Google Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */
-
-#include <openssl/ec.h>
-#include <openssl/err.h>
-
-#include <assert.h>
-
-#include "internal.h"
-#include "../bn/internal.h"
-#include "../../internal.h"
-
-
-int ec_bignum_to_felem(const EC_GROUP *group, EC_FELEM *out, const BIGNUM *in) {
-  if (BN_is_negative(in) || BN_cmp(in, &group->field) >= 0) {
-    OPENSSL_PUT_ERROR(EC, EC_R_COORDINATES_OUT_OF_RANGE);
-    return 0;
-  }
-  return group->meth->bignum_to_felem(group, out, in);
-}
-
-int ec_felem_to_bignum(const EC_GROUP *group, BIGNUM *out, const EC_FELEM *in) {
-  return group->meth->felem_to_bignum(group, out, in);
-}
-
-void ec_felem_neg(const EC_GROUP *group, EC_FELEM *out, const EC_FELEM *a) {
-  // -a is zero if a is zero and p-a otherwise.
-  BN_ULONG mask = ec_felem_non_zero_mask(group, a);
-  BN_ULONG borrow =
-      bn_sub_words(out->words, group->field.d, a->words, group->field.width);
-  assert(borrow == 0);
-  (void)borrow;
-  for (int i = 0; i < group->field.width; i++) {
-    out->words[i] &= mask;
-  }
-}
-
-void ec_felem_add(const EC_GROUP *group, EC_FELEM *out, const EC_FELEM *a,
-                  const EC_FELEM *b) {
-  EC_FELEM tmp;
-  bn_mod_add_words(out->words, a->words, b->words, group->field.d, tmp.words,
-                   group->field.width);
-}
-
-void ec_felem_sub(const EC_GROUP *group, EC_FELEM *out, const EC_FELEM *a,
-                  const EC_FELEM *b) {
-  EC_FELEM tmp;
-  bn_mod_sub_words(out->words, a->words, b->words, group->field.d, tmp.words,
-                   group->field.width);
-}
-
-BN_ULONG ec_felem_non_zero_mask(const EC_GROUP *group, const EC_FELEM *a) {
-  BN_ULONG mask = 0;
-  for (int i = 0; i < group->field.width; i++) {
-    mask |= a->words[i];
-  }
-  return ~constant_time_is_zero_w(mask);
-}
-
-void ec_felem_select(const EC_GROUP *group, EC_FELEM *out, BN_ULONG mask,
-                     const EC_FELEM *a, const EC_FELEM *b) {
-  bn_select_words(out->words, mask, a->words, b->words, group->field.width);
-}
-
-int ec_felem_equal(const EC_GROUP *group, const EC_FELEM *a,
-                   const EC_FELEM *b) {
-  // Note this function is variable-time. Constant-time operations should use
-  // |ec_felem_non_zero_mask|.
-  return OPENSSL_memcmp(a->words, b->words,
-                        group->field.width * sizeof(BN_ULONG)) == 0;
-}

data/third_party/boringssl/crypto/fipsmodule/ec/internal.h

@@ -1,503 +0,0 @@
-/* Originally written by Bodo Moeller for the OpenSSL project.
- * ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the OpenSSL open source
- * license provided above.
- *
- * The elliptic curve binary polynomial software is originally written by
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems
- * Laboratories. */
-
-#ifndef OPENSSL_HEADER_EC_INTERNAL_H
-#define OPENSSL_HEADER_EC_INTERNAL_H
-
-#include <openssl/base.h>
-
-#include <openssl/bn.h>
-#include <openssl/ex_data.h>
-#include <openssl/thread.h>
-#include <openssl/type_check.h>
-
-#include "../bn/internal.h"
-
-#if defined(__cplusplus)
-extern "C" {
-#endif
-
-
-// Cap the size of all field elements and scalars, including custom curves, to
-// 66 bytes, large enough to fit secp521r1 and brainpoolP512r1, which appear to
-// be the largest fields anyone plausibly uses.
-#define EC_MAX_BYTES 66
-#define EC_MAX_WORDS ((EC_MAX_BYTES + BN_BYTES - 1) / BN_BYTES)
-
-OPENSSL_STATIC_ASSERT(EC_MAX_WORDS <= BN_SMALL_MAX_WORDS,
-                      "bn_*_small functions not usable");
-
-// An EC_SCALAR is an integer fully reduced modulo the order. Only the first
-// |order->width| words are used. An |EC_SCALAR| is specific to an |EC_GROUP|
-// and must not be mixed between groups.
-typedef union {
-  // bytes is the representation of the scalar in little-endian order.
-  uint8_t bytes[EC_MAX_BYTES];
-  BN_ULONG words[EC_MAX_WORDS];
-} EC_SCALAR;
-
-// An EC_FELEM represents a field element. Only the first |field->width| words
-// are used. An |EC_FELEM| is specific to an |EC_GROUP| and must not be mixed
-// between groups. Additionally, the representation (whether or not elements are
-// represented in Montgomery-form) may vary between |EC_METHOD|s.
-typedef union {
-  // bytes is the representation of the field element in little-endian order.
-  uint8_t bytes[EC_MAX_BYTES];
-  BN_ULONG words[EC_MAX_WORDS];
-} EC_FELEM;
-
-// An EC_RAW_POINT represents an elliptic curve point. Unlike |EC_POINT|, it is
-// a plain struct which can be stack-allocated and needs no cleanup. It is
-// specific to an |EC_GROUP| and must not be mixed between groups.
-typedef struct {
-  EC_FELEM X, Y, Z;
-  // X, Y, and Z are Jacobian projective coordinates. They represent
-  // (X/Z^2, Y/Z^3) if Z != 0 and the point at infinity otherwise.
-} EC_RAW_POINT;
-
-struct ec_method_st {
-  int (*group_init)(EC_GROUP *);
-  void (*group_finish)(EC_GROUP *);
-  int (*group_set_curve)(EC_GROUP *, const BIGNUM *p, const BIGNUM *a,
-                         const BIGNUM *b, BN_CTX *);
-
-  // point_get_affine_coordinates sets |*x| and |*y| to the affine coordinates
-  // of |p|. Either |x| or |y| may be NULL to omit it. It returns one on success
-  // and zero if |p| is the point at infinity.
-  //
-  // Note: unlike |EC_FELEM|s used as intermediate values internal to the
-  // |EC_METHOD|, |*x| and |*y| are not encoded in Montgomery form.
-  int (*point_get_affine_coordinates)(const EC_GROUP *, const EC_RAW_POINT *p,
-                                      EC_FELEM *x, EC_FELEM *y);
-
-  // add sets |r| to |a| + |b|.
-  void (*add)(const EC_GROUP *group, EC_RAW_POINT *r, const EC_RAW_POINT *a,
-              const EC_RAW_POINT *b);
-  // dbl sets |r| to |a| + |a|.
-  void (*dbl)(const EC_GROUP *group, EC_RAW_POINT *r, const EC_RAW_POINT *a);
-
-  // mul sets |r| to |scalar|*|p|.
-  void (*mul)(const EC_GROUP *group, EC_RAW_POINT *r, const EC_RAW_POINT *p,
-              const EC_SCALAR *scalar);
-  // mul_base sets |r| to |scalar|*generator.
-  void (*mul_base)(const EC_GROUP *group, EC_RAW_POINT *r,
-                   const EC_SCALAR *scalar);
-  // mul_public sets |r| to |g_scalar|*generator + |p_scalar|*|p|. It assumes
-  // that the inputs are public so there is no concern about leaking their
-  // values through timing.
-  void (*mul_public)(const EC_GROUP *group, EC_RAW_POINT *r,
-                     const EC_SCALAR *g_scalar, const EC_RAW_POINT *p,
-                     const EC_SCALAR *p_scalar);
-
-  // felem_mul and felem_sqr implement multiplication and squaring,
-  // respectively, so that the generic |EC_POINT_add| and |EC_POINT_dbl|
-  // implementations can work both with |EC_GFp_mont_method| and the tuned
-  // operations.
-  //
-  // TODO(davidben): This constrains |EC_FELEM|'s internal representation, adds
-  // many indirect calls in the middle of the generic code, and a bunch of
-  // conversions. If p224-64.c were easily convertable to Montgomery form, we
-  // could say |EC_FELEM| is always in Montgomery form. If we routed the rest of
-  // simple.c to |EC_METHOD|, we could give |EC_POINT| an |EC_METHOD|-specific
-  // representation and say |EC_FELEM| is purely a |EC_GFp_mont_method| type.
-  void (*felem_mul)(const EC_GROUP *, EC_FELEM *r, const EC_FELEM *a,
-                    const EC_FELEM *b);
-  void (*felem_sqr)(const EC_GROUP *, EC_FELEM *r, const EC_FELEM *a);
-
-  int (*bignum_to_felem)(const EC_GROUP *group, EC_FELEM *out,
-                         const BIGNUM *in);
-  int (*felem_to_bignum)(const EC_GROUP *group, BIGNUM *out,
-                         const EC_FELEM *in);
-
-  // scalar_inv_montgomery sets |out| to |in|^-1, where both input and output
-  // are in Montgomery form.
-  void (*scalar_inv_montgomery)(const EC_GROUP *group, EC_SCALAR *out,
-                                const EC_SCALAR *in);
-
-  // scalar_inv_montgomery_vartime performs the same computation as
-  // |scalar_inv_montgomery|. It further assumes that the inputs are public so
-  // there is no concern about leaking their values through timing.
-  int (*scalar_inv_montgomery_vartime)(const EC_GROUP *group, EC_SCALAR *out,
-                                       const EC_SCALAR *in);
-
-  // cmp_x_coordinate compares the x (affine) coordinate of |p|, mod the group
-  // order, with |r|. It returns one if the values match and zero if |p| is the
-  // point at infinity of the values do not match.
-  int (*cmp_x_coordinate)(const EC_GROUP *group, const EC_RAW_POINT *p,
-                          const EC_SCALAR *r);
-} /* EC_METHOD */;
-
-const EC_METHOD *EC_GFp_mont_method(void);
-
-struct ec_group_st {
-  const EC_METHOD *meth;
-
-  // Unlike all other |EC_POINT|s, |generator| does not own |generator->group|
-  // to avoid a reference cycle.
-  EC_POINT *generator;
-  BIGNUM order;
-
-  int curve_name;  // optional NID for named curve
-
-  BN_MONT_CTX *order_mont;  // data for ECDSA inverse
-
-  // The following members are handled by the method functions,
-  // even if they appear generic
-
-  BIGNUM field;  // For curves over GF(p), this is the modulus.
-
-  EC_FELEM a, b;  // Curve coefficients.
-
-  // a_is_minus3 is one if |a| is -3 mod |field| and zero otherwise. Point
-  // arithmetic is optimized for -3.
-  int a_is_minus3;
-
-  // field_greater_than_order is one if |field| is greate than |order| and zero
-  // otherwise.
-  int field_greater_than_order;
-
-  // field_minus_order, if |field_greater_than_order| is true, is |field| minus
-  // |order| represented as an |EC_FELEM|. Otherwise, it is zero.
-  //
-  // Note: unlike |EC_FELEM|s used as intermediate values internal to the
-  // |EC_METHOD|, this value is not encoded in Montgomery form.
-  EC_FELEM field_minus_order;
-
-  CRYPTO_refcount_t references;
-
-  BN_MONT_CTX *mont;  // Montgomery structure.
-
-  EC_FELEM one;  // The value one.
-} /* EC_GROUP */;
-
-struct ec_point_st {
-  // group is an owning reference to |group|, unless this is
-  // |group->generator|.
-  EC_GROUP *group;
-  // raw is the group-specific point data. Functions that take |EC_POINT|
-  // typically check consistency with |EC_GROUP| while functions that take
-  // |EC_RAW_POINT| do not. Thus accesses to this field should be externally
-  // checked for consistency.
-  EC_RAW_POINT raw;
-} /* EC_POINT */;
-
-EC_GROUP *ec_group_new(const EC_METHOD *meth);
-
-// ec_bignum_to_felem converts |in| to an |EC_FELEM|. It returns one on success
-// and zero if |in| is out of range.
-int ec_bignum_to_felem(const EC_GROUP *group, EC_FELEM *out, const BIGNUM *in);
-
-// ec_felem_to_bignum converts |in| to a |BIGNUM|. It returns one on success and
-// zero on allocation failure.
-int ec_felem_to_bignum(const EC_GROUP *group, BIGNUM *out, const EC_FELEM *in);
-
-// ec_felem_neg sets |out| to -|a|.
-void ec_felem_neg(const EC_GROUP *group, EC_FELEM *out, const EC_FELEM *a);
-
-// ec_felem_add sets |out| to |a| + |b|.
-void ec_felem_add(const EC_GROUP *group, EC_FELEM *out, const EC_FELEM *a,
-                  const EC_FELEM *b);
-
-// ec_felem_add sets |out| to |a| - |b|.
-void ec_felem_sub(const EC_GROUP *group, EC_FELEM *out, const EC_FELEM *a,
-                  const EC_FELEM *b);
-
-// ec_felem_non_zero_mask returns all ones if |a| is non-zero and all zeros
-// otherwise.
-BN_ULONG ec_felem_non_zero_mask(const EC_GROUP *group, const EC_FELEM *a);
-
-// ec_felem_select, in constant time, sets |out| to |a| if |mask| is all ones
-// and |b| if |mask| is all zeros.
-void ec_felem_select(const EC_GROUP *group, EC_FELEM *out, BN_ULONG mask,
-                     const EC_FELEM *a, const EC_FELEM *b);
-
-// ec_felem_equal returns one if |a| and |b| are equal and zero otherwise. It
-// treats |a| and |b| as public and does *not* run in constant time.
-int ec_felem_equal(const EC_GROUP *group, const EC_FELEM *a, const EC_FELEM *b);
-
-// ec_bignum_to_scalar converts |in| to an |EC_SCALAR| and writes it to
-// |*out|. It returns one on success and zero if |in| is out of range.
-OPENSSL_EXPORT int ec_bignum_to_scalar(const EC_GROUP *group, EC_SCALAR *out,
-                                       const BIGNUM *in);
-
-// ec_random_nonzero_scalar sets |out| to a uniformly selected random value from
-// 1 to |group->order| - 1. It returns one on success and zero on error.
-int ec_random_nonzero_scalar(const EC_GROUP *group, EC_SCALAR *out,
-                             const uint8_t additional_data[32]);
-
-// ec_scalar_equal_vartime returns one if |a| and |b| are equal and zero
-// otherwise. Both values are treated as public.
-int ec_scalar_equal_vartime(const EC_GROUP *group, const EC_SCALAR *a,
-                            const EC_SCALAR *b);
-
-// ec_scalar_is_zero returns one if |a| is zero and zero otherwise.
-int ec_scalar_is_zero(const EC_GROUP *group, const EC_SCALAR *a);
-
-// ec_scalar_add sets |r| to |a| + |b|.
-void ec_scalar_add(const EC_GROUP *group, EC_SCALAR *r, const EC_SCALAR *a,
-                   const EC_SCALAR *b);
-
-// ec_scalar_to_montgomery sets |r| to |a| in Montgomery form.
-void ec_scalar_to_montgomery(const EC_GROUP *group, EC_SCALAR *r,
-                             const EC_SCALAR *a);
-
-// ec_scalar_to_montgomery sets |r| to |a| converted from Montgomery form.
-void ec_scalar_from_montgomery(const EC_GROUP *group, EC_SCALAR *r,
-                               const EC_SCALAR *a);
-
-// ec_scalar_mul_montgomery sets |r| to |a| * |b| where inputs and outputs are
-// in Montgomery form.
-void ec_scalar_mul_montgomery(const EC_GROUP *group, EC_SCALAR *r,
-                              const EC_SCALAR *a, const EC_SCALAR *b);
-
-// ec_scalar_mul_montgomery sets |r| to |a|^-1 where inputs and outputs are in
-// Montgomery form.
-void ec_scalar_inv_montgomery(const EC_GROUP *group, EC_SCALAR *r,
-                              const EC_SCALAR *a);
-
-// ec_scalar_inv_montgomery_vartime performs the same actions as
-// |ec_scalar_inv_montgomery|, but in variable time.
-int ec_scalar_inv_montgomery_vartime(const EC_GROUP *group, EC_SCALAR *r,
-                                     const EC_SCALAR *a);
-
-// ec_point_mul_scalar sets |r| to |p| * |scalar|. Both inputs are considered
-// secret.
-int ec_point_mul_scalar(const EC_GROUP *group, EC_RAW_POINT *r,
-                        const EC_RAW_POINT *p, const EC_SCALAR *scalar);
-
-// ec_point_mul_scalar_base sets |r| to generator * |scalar|. |scalar| is
-// treated as secret.
-int ec_point_mul_scalar_base(const EC_GROUP *group, EC_RAW_POINT *r,
-                             const EC_SCALAR *scalar);
-
-// ec_point_mul_scalar_public performs the same computation as
-// ec_point_mul_scalar.  It further assumes that the inputs are public so
-// there is no concern about leaking their values through timing.
-OPENSSL_EXPORT int ec_point_mul_scalar_public(const EC_GROUP *group,
-                                              EC_RAW_POINT *r,
-                                              const EC_SCALAR *g_scalar,
-                                              const EC_RAW_POINT *p,
-                                              const EC_SCALAR *p_scalar);
-
-// ec_cmp_x_coordinate compares the x (affine) coordinate of |p|, mod the group
-// order, with |r|. It returns one if the values match and zero if |p| is the
-// point at infinity of the values do not match.
-int ec_cmp_x_coordinate(const EC_GROUP *group, const EC_RAW_POINT *p,
-                        const EC_SCALAR *r);
-
-// ec_get_x_coordinate_as_scalar sets |*out| to |p|'s x-coordinate, modulo
-// |group->order|. It returns one on success and zero if |p| is the point at
-// infinity.
-int ec_get_x_coordinate_as_scalar(const EC_GROUP *group, EC_SCALAR *out,
-                                  const EC_RAW_POINT *p);
-
-// ec_point_get_affine_coordinate_bytes writes |p|'s affine coordinates to
-// |out_x| and |out_y|, each of which must have at must |max_out| bytes. It sets
-// |*out_len| to the number of bytes written in each buffer. Coordinates are
-// written big-endian and zero-padded to the size of the field.
-//
-// Either of |out_x| or |out_y| may be NULL to omit that coordinate. This
-// function returns one on success and zero on failure.
-int ec_point_get_affine_coordinate_bytes(const EC_GROUP *group, uint8_t *out_x,
-                                         uint8_t *out_y, size_t *out_len,
-                                         size_t max_out, const EC_RAW_POINT *p);
-
-// ec_field_element_to_scalar reduces |r| modulo |group->order|. |r| must
-// previously have been reduced modulo |group->field|.
-int ec_field_element_to_scalar(const EC_GROUP *group, BIGNUM *r);
-
-void ec_GFp_mont_mul(const EC_GROUP *group, EC_RAW_POINT *r,
-                     const EC_RAW_POINT *p, const EC_SCALAR *scalar);
-void ec_GFp_mont_mul_base(const EC_GROUP *group, EC_RAW_POINT *r,
-                          const EC_SCALAR *scalar);
-
-// ec_compute_wNAF writes the modified width-(w+1) Non-Adjacent Form (wNAF) of
-// |scalar| to |out|. |out| must have room for |bits| + 1 elements, each of
-// which will be either zero or odd with an absolute value less than  2^w
-// satisfying
-//     scalar = \sum_j out[j]*2^j
-// where at most one of any  w+1  consecutive digits is non-zero
-// with the exception that the most significant digit may be only
-// w-1 zeros away from that next non-zero digit.
-void ec_compute_wNAF(const EC_GROUP *group, int8_t *out,
-                     const EC_SCALAR *scalar, size_t bits, int w);
-
-void ec_GFp_mont_mul_public(const EC_GROUP *group, EC_RAW_POINT *r,
-                            const EC_SCALAR *g_scalar, const EC_RAW_POINT *p,
-                            const EC_SCALAR *p_scalar);
-
-// method functions in simple.c
-int ec_GFp_simple_group_init(EC_GROUP *);
-void ec_GFp_simple_group_finish(EC_GROUP *);
-int ec_GFp_simple_group_set_curve(EC_GROUP *, const BIGNUM *p, const BIGNUM *a,
-                                  const BIGNUM *b, BN_CTX *);
-int ec_GFp_simple_group_get_curve(const EC_GROUP *, BIGNUM *p, BIGNUM *a,
-                                  BIGNUM *b);
-void ec_GFp_simple_point_init(EC_RAW_POINT *);
-void ec_GFp_simple_point_copy(EC_RAW_POINT *, const EC_RAW_POINT *);
-void ec_GFp_simple_point_set_to_infinity(const EC_GROUP *, EC_RAW_POINT *);
-int ec_GFp_simple_point_set_affine_coordinates(const EC_GROUP *, EC_RAW_POINT *,
-                                               const BIGNUM *x,
-                                               const BIGNUM *y);
-void ec_GFp_mont_add(const EC_GROUP *, EC_RAW_POINT *r, const EC_RAW_POINT *a,
-                     const EC_RAW_POINT *b);
-void ec_GFp_mont_dbl(const EC_GROUP *, EC_RAW_POINT *r, const EC_RAW_POINT *a);
-void ec_GFp_simple_invert(const EC_GROUP *, EC_RAW_POINT *);
-int ec_GFp_simple_is_at_infinity(const EC_GROUP *, const EC_RAW_POINT *);
-int ec_GFp_simple_is_on_curve(const EC_GROUP *, const EC_RAW_POINT *);
-int ec_GFp_simple_cmp(const EC_GROUP *, const EC_RAW_POINT *a,
-                      const EC_RAW_POINT *b);
-void ec_simple_scalar_inv_montgomery(const EC_GROUP *group, EC_SCALAR *r,
-                                     const EC_SCALAR *a);
-
-int ec_GFp_simple_mont_inv_mod_ord_vartime(const EC_GROUP *group, EC_SCALAR *r,
-                                           const EC_SCALAR *a);
-
-int ec_GFp_simple_cmp_x_coordinate(const EC_GROUP *group, const EC_RAW_POINT *p,
-                                   const EC_SCALAR *r);
-
-// method functions in montgomery.c
-int ec_GFp_mont_group_init(EC_GROUP *);
-int ec_GFp_mont_group_set_curve(EC_GROUP *, const BIGNUM *p, const BIGNUM *a,
-                                const BIGNUM *b, BN_CTX *);
-void ec_GFp_mont_group_finish(EC_GROUP *);
-void ec_GFp_mont_felem_mul(const EC_GROUP *, EC_FELEM *r, const EC_FELEM *a,
-                           const EC_FELEM *b);
-void ec_GFp_mont_felem_sqr(const EC_GROUP *, EC_FELEM *r, const EC_FELEM *a);
-
-int ec_GFp_mont_bignum_to_felem(const EC_GROUP *group, EC_FELEM *out,
-                                const BIGNUM *in);
-int ec_GFp_mont_felem_to_bignum(const EC_GROUP *group, BIGNUM *out,
-                                const EC_FELEM *in);
-
-void ec_GFp_nistp_recode_scalar_bits(uint8_t *sign, uint8_t *digit, uint8_t in);
-
-const EC_METHOD *EC_GFp_nistp224_method(void);
-const EC_METHOD *EC_GFp_nistp256_method(void);
-
-// EC_GFp_nistz256_method is a GFp method using montgomery multiplication, with
-// x86-64 optimized P256. See http://eprint.iacr.org/2013/816.
-const EC_METHOD *EC_GFp_nistz256_method(void);
-
-// An EC_WRAPPED_SCALAR is an |EC_SCALAR| with a parallel |BIGNUM|
-// representation. It exists to support the |EC_KEY_get0_private_key| API.
-typedef struct {
-  BIGNUM bignum;
-  EC_SCALAR scalar;
-} EC_WRAPPED_SCALAR;
-
-struct ec_key_st {
-  EC_GROUP *group;
-
-  EC_POINT *pub_key;
-  EC_WRAPPED_SCALAR *priv_key;
-
-  // fixed_k may contain a specific value of 'k', to be used in ECDSA signing.
-  // This is only for the FIPS power-on tests.
-  BIGNUM *fixed_k;
-
-  unsigned int enc_flag;
-  point_conversion_form_t conv_form;
-
-  CRYPTO_refcount_t references;
-
-  ECDSA_METHOD *ecdsa_meth;
-
-  CRYPTO_EX_DATA ex_data;
-} /* EC_KEY */;
-
-struct built_in_curve {
-  int nid;
-  const uint8_t *oid;
-  uint8_t oid_len;
-  // comment is a human-readable string describing the curve.
-  const char *comment;
-  // param_len is the number of bytes needed to store a field element.
-  uint8_t param_len;
-  // params points to an array of 6*|param_len| bytes which hold the field
-  // elements of the following (in big-endian order): prime, a, b, generator x,
-  // generator y, order.
-  const uint8_t *params;
-  const EC_METHOD *method;
-};
-
-#define OPENSSL_NUM_BUILT_IN_CURVES 4
-
-struct built_in_curves {
-  struct built_in_curve curves[OPENSSL_NUM_BUILT_IN_CURVES];
-};
-
-// OPENSSL_built_in_curves returns a pointer to static information about
-// standard curves. The array is terminated with an entry where |nid| is
-// |NID_undef|.
-const struct built_in_curves *OPENSSL_built_in_curves(void);
-
-#if defined(__cplusplus)
-}  // extern C
-#endif
-
-#endif  // OPENSSL_HEADER_EC_INTERNAL_H