grpc 1.26.0 → 1.30.0

data/third_party/abseil-cpp/absl/strings/internal/utf8.cc

@@ -0,0 +1,53 @@
+// Copyright 2017 The Abseil Authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// UTF8 utilities, implemented to reduce dependencies.
+
+#include "absl/strings/internal/utf8.h"
+
+namespace absl {
+ABSL_NAMESPACE_BEGIN
+namespace strings_internal {
+
+size_t EncodeUTF8Char(char *buffer, char32_t utf8_char) {
+  if (utf8_char <= 0x7F) {
+    *buffer = static_cast<char>(utf8_char);
+    return 1;
+  } else if (utf8_char <= 0x7FF) {
+    buffer[1] = 0x80 | (utf8_char & 0x3F);
+    utf8_char >>= 6;
+    buffer[0] = 0xC0 | utf8_char;
+    return 2;
+  } else if (utf8_char <= 0xFFFF) {
+    buffer[2] = 0x80 | (utf8_char & 0x3F);
+    utf8_char >>= 6;
+    buffer[1] = 0x80 | (utf8_char & 0x3F);
+    utf8_char >>= 6;
+    buffer[0] = 0xE0 | utf8_char;
+    return 3;
+  } else {
+    buffer[3] = 0x80 | (utf8_char & 0x3F);
+    utf8_char >>= 6;
+    buffer[2] = 0x80 | (utf8_char & 0x3F);
+    utf8_char >>= 6;
+    buffer[1] = 0x80 | (utf8_char & 0x3F);
+    utf8_char >>= 6;
+    buffer[0] = 0xF0 | utf8_char;
+    return 4;
+  }
+}
+
+}  // namespace strings_internal
+ABSL_NAMESPACE_END
+}  // namespace absl

data/third_party/abseil-cpp/absl/strings/internal/utf8.h

@@ -0,0 +1,50 @@
+// Copyright 2017 The Abseil Authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+// UTF8 utilities, implemented to reduce dependencies.
+
+#ifndef ABSL_STRINGS_INTERNAL_UTF8_H_
+#define ABSL_STRINGS_INTERNAL_UTF8_H_
+
+#include <cstddef>
+#include <cstdint>
+
+#include "absl/base/config.h"
+
+namespace absl {
+ABSL_NAMESPACE_BEGIN
+namespace strings_internal {
+
+// For Unicode code points 0 through 0x10FFFF, EncodeUTF8Char writes
+// out the UTF-8 encoding into buffer, and returns the number of chars
+// it wrote.
+//
+// As described in https://tools.ietf.org/html/rfc3629#section-3 , the encodings
+// are:
+//    00 -     7F : 0xxxxxxx
+//    80 -    7FF : 110xxxxx 10xxxxxx
+//   800 -   FFFF : 1110xxxx 10xxxxxx 10xxxxxx
+// 10000 - 10FFFF : 11110xxx 10xxxxxx 10xxxxxx 10xxxxxx
+//
+// Values greater than 0x10FFFF are not supported and may or may not write
+// characters into buffer, however never will more than kMaxEncodedUTF8Size
+// bytes be written, regardless of the value of utf8_char.
+enum { kMaxEncodedUTF8Size = 4 };
+size_t EncodeUTF8Char(char *buffer, char32_t utf8_char);
+
+}  // namespace strings_internal
+ABSL_NAMESPACE_END
+}  // namespace absl
+
+#endif  // ABSL_STRINGS_INTERNAL_UTF8_H_

data/third_party/abseil-cpp/absl/strings/match.cc

@@ -0,0 +1,40 @@
+// Copyright 2017 The Abseil Authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#include "absl/strings/match.h"
+
+#include "absl/strings/internal/memutil.h"
+
+namespace absl {
+ABSL_NAMESPACE_BEGIN
+
+bool EqualsIgnoreCase(absl::string_view piece1, absl::string_view piece2) {
+  return (piece1.size() == piece2.size() &&
+          0 == absl::strings_internal::memcasecmp(piece1.data(), piece2.data(),
+                                                  piece1.size()));
+  // memcasecmp uses absl::ascii_tolower().
+}
+
+bool StartsWithIgnoreCase(absl::string_view text, absl::string_view prefix) {
+  return (text.size() >= prefix.size()) &&
+         EqualsIgnoreCase(text.substr(0, prefix.size()), prefix);
+}
+
+bool EndsWithIgnoreCase(absl::string_view text, absl::string_view suffix) {
+  return (text.size() >= suffix.size()) &&
+         EqualsIgnoreCase(text.substr(text.size() - suffix.size()), suffix);
+}
+
+ABSL_NAMESPACE_END
+}  // namespace absl

data/third_party/abseil-cpp/absl/strings/match.h

@@ -0,0 +1,90 @@
+//
+// Copyright 2017 The Abseil Authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+// -----------------------------------------------------------------------------
+// File: match.h
+// -----------------------------------------------------------------------------
+//
+// This file contains simple utilities for performing string matching checks.
+// All of these function parameters are specified as `absl::string_view`,
+// meaning that these functions can accept `std::string`, `absl::string_view` or
+// NUL-terminated C-style strings.
+//
+// Examples:
+//   std::string s = "foo";
+//   absl::string_view sv = "f";
+//   assert(absl::StrContains(s, sv));
+//
+// Note: The order of parameters in these functions is designed to mimic the
+// order an equivalent member function would exhibit;
+// e.g. `s.Contains(x)` ==> `absl::StrContains(s, x).
+#ifndef ABSL_STRINGS_MATCH_H_
+#define ABSL_STRINGS_MATCH_H_
+
+#include <cstring>
+
+#include "absl/strings/string_view.h"
+
+namespace absl {
+ABSL_NAMESPACE_BEGIN
+
+// StrContains()
+//
+// Returns whether a given string `haystack` contains the substring `needle`.
+inline bool StrContains(absl::string_view haystack, absl::string_view needle) {
+  return haystack.find(needle, 0) != haystack.npos;
+}
+
+// StartsWith()
+//
+// Returns whether a given string `text` begins with `prefix`.
+inline bool StartsWith(absl::string_view text, absl::string_view prefix) {
+  return prefix.empty() ||
+         (text.size() >= prefix.size() &&
+          memcmp(text.data(), prefix.data(), prefix.size()) == 0);
+}
+
+// EndsWith()
+//
+// Returns whether a given string `text` ends with `suffix`.
+inline bool EndsWith(absl::string_view text, absl::string_view suffix) {
+  return suffix.empty() ||
+         (text.size() >= suffix.size() &&
+          memcmp(text.data() + (text.size() - suffix.size()), suffix.data(),
+                 suffix.size()) == 0);
+}
+
+// EqualsIgnoreCase()
+//
+// Returns whether given ASCII strings `piece1` and `piece2` are equal, ignoring
+// case in the comparison.
+bool EqualsIgnoreCase(absl::string_view piece1, absl::string_view piece2);
+
+// StartsWithIgnoreCase()
+//
+// Returns whether a given ASCII string `text` starts with `prefix`,
+// ignoring case in the comparison.
+bool StartsWithIgnoreCase(absl::string_view text, absl::string_view prefix);
+
+// EndsWithIgnoreCase()
+//
+// Returns whether a given ASCII string `text` ends with `suffix`, ignoring
+// case in the comparison.
+bool EndsWithIgnoreCase(absl::string_view text, absl::string_view suffix);
+
+ABSL_NAMESPACE_END
+}  // namespace absl
+
+#endif  // ABSL_STRINGS_MATCH_H_

data/third_party/abseil-cpp/absl/strings/numbers.cc

@@ -0,0 +1,965 @@
+// Copyright 2017 The Abseil Authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// This file contains string processing functions related to
+// numeric values.
+
+#include "absl/strings/numbers.h"
+
+#include <algorithm>
+#include <cassert>
+#include <cfloat>  // for DBL_DIG and FLT_DIG
+#include <cmath>   // for HUGE_VAL
+#include <cstdint>
+#include <cstdio>
+#include <cstdlib>
+#include <cstring>
+#include <iterator>
+#include <limits>
+#include <memory>
+#include <utility>
+
+#include "absl/base/attributes.h"
+#include "absl/base/internal/bits.h"
+#include "absl/base/internal/raw_logging.h"
+#include "absl/strings/ascii.h"
+#include "absl/strings/charconv.h"
+#include "absl/strings/escaping.h"
+#include "absl/strings/internal/memutil.h"
+#include "absl/strings/match.h"
+#include "absl/strings/str_cat.h"
+
+namespace absl {
+ABSL_NAMESPACE_BEGIN
+
+bool SimpleAtof(absl::string_view str, float* out) {
+  *out = 0.0;
+  str = StripAsciiWhitespace(str);
+  if (!str.empty() && str[0] == '+') {
+    str.remove_prefix(1);
+  }
+  auto result = absl::from_chars(str.data(), str.data() + str.size(), *out);
+  if (result.ec == std::errc::invalid_argument) {
+    return false;
+  }
+  if (result.ptr != str.data() + str.size()) {
+    // not all non-whitespace characters consumed
+    return false;
+  }
+  // from_chars() with DR 3081's current wording will return max() on
+  // overflow.  SimpleAtof returns infinity instead.
+  if (result.ec == std::errc::result_out_of_range) {
+    if (*out > 1.0) {
+      *out = std::numeric_limits<float>::infinity();
+    } else if (*out < -1.0) {
+      *out = -std::numeric_limits<float>::infinity();
+    }
+  }
+  return true;
+}
+
+bool SimpleAtod(absl::string_view str, double* out) {
+  *out = 0.0;
+  str = StripAsciiWhitespace(str);
+  if (!str.empty() && str[0] == '+') {
+    str.remove_prefix(1);
+  }
+  auto result = absl::from_chars(str.data(), str.data() + str.size(), *out);
+  if (result.ec == std::errc::invalid_argument) {
+    return false;
+  }
+  if (result.ptr != str.data() + str.size()) {
+    // not all non-whitespace characters consumed
+    return false;
+  }
+  // from_chars() with DR 3081's current wording will return max() on
+  // overflow.  SimpleAtod returns infinity instead.
+  if (result.ec == std::errc::result_out_of_range) {
+    if (*out > 1.0) {
+      *out = std::numeric_limits<double>::infinity();
+    } else if (*out < -1.0) {
+      *out = -std::numeric_limits<double>::infinity();
+    }
+  }
+  return true;
+}
+
+bool SimpleAtob(absl::string_view str, bool* out) {
+  ABSL_RAW_CHECK(out != nullptr, "Output pointer must not be nullptr.");
+  if (EqualsIgnoreCase(str, "true") || EqualsIgnoreCase(str, "t") ||
+      EqualsIgnoreCase(str, "yes") || EqualsIgnoreCase(str, "y") ||
+      EqualsIgnoreCase(str, "1")) {
+    *out = true;
+    return true;
+  }
+  if (EqualsIgnoreCase(str, "false") || EqualsIgnoreCase(str, "f") ||
+      EqualsIgnoreCase(str, "no") || EqualsIgnoreCase(str, "n") ||
+      EqualsIgnoreCase(str, "0")) {
+    *out = false;
+    return true;
+  }
+  return false;
+}
+
+// ----------------------------------------------------------------------
+// FastIntToBuffer() overloads
+//
+// Like the Fast*ToBuffer() functions above, these are intended for speed.
+// Unlike the Fast*ToBuffer() functions, however, these functions write
+// their output to the beginning of the buffer.  The caller is responsible
+// for ensuring that the buffer has enough space to hold the output.
+//
+// Returns a pointer to the end of the string (i.e. the null character
+// terminating the string).
+// ----------------------------------------------------------------------
+
+namespace {
+
+// Used to optimize printing a decimal number's final digit.
+const char one_ASCII_final_digits[10][2] {
+  {'0', 0}, {'1', 0}, {'2', 0}, {'3', 0}, {'4', 0},
+  {'5', 0}, {'6', 0}, {'7', 0}, {'8', 0}, {'9', 0},
+};
+
+}  // namespace
+
+char* numbers_internal::FastIntToBuffer(uint32_t i, char* buffer) {
+  uint32_t digits;
+  // The idea of this implementation is to trim the number of divides to as few
+  // as possible, and also reducing memory stores and branches, by going in
+  // steps of two digits at a time rather than one whenever possible.
+  // The huge-number case is first, in the hopes that the compiler will output
+  // that case in one branch-free block of code, and only output conditional
+  // branches into it from below.
+  if (i >= 1000000000) {     // >= 1,000,000,000
+    digits = i / 100000000;  //      100,000,000
+    i -= digits * 100000000;
+    PutTwoDigits(digits, buffer);
+    buffer += 2;
+  lt100_000_000:
+    digits = i / 1000000;  // 1,000,000
+    i -= digits * 1000000;
+    PutTwoDigits(digits, buffer);
+    buffer += 2;
+  lt1_000_000:
+    digits = i / 10000;  // 10,000
+    i -= digits * 10000;
+    PutTwoDigits(digits, buffer);
+    buffer += 2;
+  lt10_000:
+    digits = i / 100;
+    i -= digits * 100;
+    PutTwoDigits(digits, buffer);
+    buffer += 2;
+ lt100:
+    digits = i;
+    PutTwoDigits(digits, buffer);
+    buffer += 2;
+    *buffer = 0;
+    return buffer;
+  }
+
+  if (i < 100) {
+    digits = i;
+    if (i >= 10) goto lt100;
+    memcpy(buffer, one_ASCII_final_digits[i], 2);
+    return buffer + 1;
+  }
+  if (i < 10000) {  //    10,000
+    if (i >= 1000) goto lt10_000;
+    digits = i / 100;
+    i -= digits * 100;
+    *buffer++ = '0' + digits;
+    goto lt100;
+  }
+  if (i < 1000000) {  //    1,000,000
+    if (i >= 100000) goto lt1_000_000;
+    digits = i / 10000;  //    10,000
+    i -= digits * 10000;
+    *buffer++ = '0' + digits;
+    goto lt10_000;
+  }
+  if (i < 100000000) {  //    100,000,000
+    if (i >= 10000000) goto lt100_000_000;
+    digits = i / 1000000;  //   1,000,000
+    i -= digits * 1000000;
+    *buffer++ = '0' + digits;
+    goto lt1_000_000;
+  }
+  // we already know that i < 1,000,000,000
+  digits = i / 100000000;  //   100,000,000
+  i -= digits * 100000000;
+  *buffer++ = '0' + digits;
+  goto lt100_000_000;
+}
+
+char* numbers_internal::FastIntToBuffer(int32_t i, char* buffer) {
+  uint32_t u = i;
+  if (i < 0) {
+    *buffer++ = '-';
+    // We need to do the negation in modular (i.e., "unsigned")
+    // arithmetic; MSVC++ apprently warns for plain "-u", so
+    // we write the equivalent expression "0 - u" instead.
+    u = 0 - u;
+  }
+  return numbers_internal::FastIntToBuffer(u, buffer);
+}
+
+char* numbers_internal::FastIntToBuffer(uint64_t i, char* buffer) {
+  uint32_t u32 = static_cast<uint32_t>(i);
+  if (u32 == i) return numbers_internal::FastIntToBuffer(u32, buffer);
+
+  // Here we know i has at least 10 decimal digits.
+  uint64_t top_1to11 = i / 1000000000;
+  u32 = static_cast<uint32_t>(i - top_1to11 * 1000000000);
+  uint32_t top_1to11_32 = static_cast<uint32_t>(top_1to11);
+
+  if (top_1to11_32 == top_1to11) {
+    buffer = numbers_internal::FastIntToBuffer(top_1to11_32, buffer);
+  } else {
+    // top_1to11 has more than 32 bits too; print it in two steps.
+    uint32_t top_8to9 = static_cast<uint32_t>(top_1to11 / 100);
+    uint32_t mid_2 = static_cast<uint32_t>(top_1to11 - top_8to9 * 100);
+    buffer = numbers_internal::FastIntToBuffer(top_8to9, buffer);
+    PutTwoDigits(mid_2, buffer);
+    buffer += 2;
+  }
+
+  // We have only 9 digits now, again the maximum uint32_t can handle fully.
+  uint32_t digits = u32 / 10000000;  // 10,000,000
+  u32 -= digits * 10000000;
+  PutTwoDigits(digits, buffer);
+  buffer += 2;
+  digits = u32 / 100000;  // 100,000
+  u32 -= digits * 100000;
+  PutTwoDigits(digits, buffer);
+  buffer += 2;
+  digits = u32 / 1000;  // 1,000
+  u32 -= digits * 1000;
+  PutTwoDigits(digits, buffer);
+  buffer += 2;
+  digits = u32 / 10;
+  u32 -= digits * 10;
+  PutTwoDigits(digits, buffer);
+  buffer += 2;
+  memcpy(buffer, one_ASCII_final_digits[u32], 2);
+  return buffer + 1;
+}
+
+char* numbers_internal::FastIntToBuffer(int64_t i, char* buffer) {
+  uint64_t u = i;
+  if (i < 0) {
+    *buffer++ = '-';
+    u = 0 - u;
+  }
+  return numbers_internal::FastIntToBuffer(u, buffer);
+}
+
+// Given a 128-bit number expressed as a pair of uint64_t, high half first,
+// return that number multiplied by the given 32-bit value.  If the result is
+// too large to fit in a 128-bit number, divide it by 2 until it fits.
+static std::pair<uint64_t, uint64_t> Mul32(std::pair<uint64_t, uint64_t> num,
+                                           uint32_t mul) {
+  uint64_t bits0_31 = num.second & 0xFFFFFFFF;
+  uint64_t bits32_63 = num.second >> 32;
+  uint64_t bits64_95 = num.first & 0xFFFFFFFF;
+  uint64_t bits96_127 = num.first >> 32;
+
+  // The picture so far: each of these 64-bit values has only the lower 32 bits
+  // filled in.
+  // bits96_127:          [ 00000000 xxxxxxxx ]
+  // bits64_95:                    [ 00000000 xxxxxxxx ]
+  // bits32_63:                             [ 00000000 xxxxxxxx ]
+  // bits0_31:                                       [ 00000000 xxxxxxxx ]
+
+  bits0_31 *= mul;
+  bits32_63 *= mul;
+  bits64_95 *= mul;
+  bits96_127 *= mul;
+
+  // Now the top halves may also have value, though all 64 of their bits will
+  // never be set at the same time, since they are a result of a 32x32 bit
+  // multiply.  This makes the carry calculation slightly easier.
+  // bits96_127:          [ mmmmmmmm | mmmmmmmm ]
+  // bits64_95:                    [ | mmmmmmmm mmmmmmmm | ]
+  // bits32_63:                      |        [ mmmmmmmm | mmmmmmmm ]
+  // bits0_31:                       |                 [ | mmmmmmmm mmmmmmmm ]
+  // eventually:        [ bits128_up | ...bits64_127.... | ..bits0_63... ]
+
+  uint64_t bits0_63 = bits0_31 + (bits32_63 << 32);
+  uint64_t bits64_127 = bits64_95 + (bits96_127 << 32) + (bits32_63 >> 32) +
+                        (bits0_63 < bits0_31);
+  uint64_t bits128_up = (bits96_127 >> 32) + (bits64_127 < bits64_95);
+  if (bits128_up == 0) return {bits64_127, bits0_63};
+
+  int shift = 64 - base_internal::CountLeadingZeros64(bits128_up);
+  uint64_t lo = (bits0_63 >> shift) + (bits64_127 << (64 - shift));
+  uint64_t hi = (bits64_127 >> shift) + (bits128_up << (64 - shift));
+  return {hi, lo};
+}
+
+// Compute num * 5 ^ expfive, and return the first 128 bits of the result,
+// where the first bit is always a one.  So PowFive(1, 0) starts 0b100000,
+// PowFive(1, 1) starts 0b101000, PowFive(1, 2) starts 0b110010, etc.
+static std::pair<uint64_t, uint64_t> PowFive(uint64_t num, int expfive) {
+  std::pair<uint64_t, uint64_t> result = {num, 0};
+  while (expfive >= 13) {
+    // 5^13 is the highest power of five that will fit in a 32-bit integer.
+    result = Mul32(result, 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5);
+    expfive -= 13;
+  }
+  constexpr int powers_of_five[13] = {
+      1,
+      5,
+      5 * 5,
+      5 * 5 * 5,
+      5 * 5 * 5 * 5,
+      5 * 5 * 5 * 5 * 5,
+      5 * 5 * 5 * 5 * 5 * 5,
+      5 * 5 * 5 * 5 * 5 * 5 * 5,
+      5 * 5 * 5 * 5 * 5 * 5 * 5 * 5,
+      5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5,
+      5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5,
+      5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5,
+      5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5};
+  result = Mul32(result, powers_of_five[expfive & 15]);
+  int shift = base_internal::CountLeadingZeros64(result.first);
+  if (shift != 0) {
+    result.first = (result.first << shift) + (result.second >> (64 - shift));
+    result.second = (result.second << shift);
+  }
+  return result;
+}
+
+struct ExpDigits {
+  int32_t exponent;
+  char digits[6];
+};
+
+// SplitToSix converts value, a positive double-precision floating-point number,
+// into a base-10 exponent and 6 ASCII digits, where the first digit is never
+// zero.  For example, SplitToSix(1) returns an exponent of zero and a digits
+// array of {'1', '0', '0', '0', '0', '0'}.  If value is exactly halfway between
+// two possible representations, e.g. value = 100000.5, then "round to even" is
+// performed.
+static ExpDigits SplitToSix(const double value) {
+  ExpDigits exp_dig;
+  int exp = 5;
+  double d = value;
+  // First step: calculate a close approximation of the output, where the
+  // value d will be between 100,000 and 999,999, representing the digits
+  // in the output ASCII array, and exp is the base-10 exponent.  It would be
+  // faster to use a table here, and to look up the base-2 exponent of value,
+  // however value is an IEEE-754 64-bit number, so the table would have 2,000
+  // entries, which is not cache-friendly.
+  if (d >= 999999.5) {
+    if (d >= 1e+261) exp += 256, d *= 1e-256;
+    if (d >= 1e+133) exp += 128, d *= 1e-128;
+    if (d >= 1e+69) exp += 64, d *= 1e-64;
+    if (d >= 1e+37) exp += 32, d *= 1e-32;
+    if (d >= 1e+21) exp += 16, d *= 1e-16;
+    if (d >= 1e+13) exp += 8, d *= 1e-8;
+    if (d >= 1e+9) exp += 4, d *= 1e-4;
+    if (d >= 1e+7) exp += 2, d *= 1e-2;
+    if (d >= 1e+6) exp += 1, d *= 1e-1;
+  } else {
+    if (d < 1e-250) exp -= 256, d *= 1e256;
+    if (d < 1e-122) exp -= 128, d *= 1e128;
+    if (d < 1e-58) exp -= 64, d *= 1e64;
+    if (d < 1e-26) exp -= 32, d *= 1e32;
+    if (d < 1e-10) exp -= 16, d *= 1e16;
+    if (d < 1e-2) exp -= 8, d *= 1e8;
+    if (d < 1e+2) exp -= 4, d *= 1e4;
+    if (d < 1e+4) exp -= 2, d *= 1e2;
+    if (d < 1e+5) exp -= 1, d *= 1e1;
+  }
+  // At this point, d is in the range [99999.5..999999.5) and exp is in the
+  // range [-324..308]. Since we need to round d up, we want to add a half
+  // and truncate.
+  // However, the technique above may have lost some precision, due to its
+  // repeated multiplication by constants that each may be off by half a bit
+  // of precision.  This only matters if we're close to the edge though.
+  // Since we'd like to know if the fractional part of d is close to a half,
+  // we multiply it by 65536 and see if the fractional part is close to 32768.
+  // (The number doesn't have to be a power of two,but powers of two are faster)
+  uint64_t d64k = d * 65536;
+  int dddddd;  // A 6-digit decimal integer.
+  if ((d64k % 65536) == 32767 || (d64k % 65536) == 32768) {
+    // OK, it's fairly likely that precision was lost above, which is
+    // not a surprise given only 52 mantissa bits are available.  Therefore
+    // redo the calculation using 128-bit numbers.  (64 bits are not enough).
+
+    // Start out with digits rounded down; maybe add one below.
+    dddddd = static_cast<int>(d64k / 65536);
+
+    // mantissa is a 64-bit integer representing M.mmm... * 2^63.  The actual
+    // value we're representing, of course, is M.mmm... * 2^exp2.
+    int exp2;
+    double m = std::frexp(value, &exp2);
+    uint64_t mantissa = m * (32768.0 * 65536.0 * 65536.0 * 65536.0);
+    // std::frexp returns an m value in the range [0.5, 1.0), however we
+    // can't multiply it by 2^64 and convert to an integer because some FPUs
+    // throw an exception when converting an number higher than 2^63 into an
+    // integer - even an unsigned 64-bit integer!  Fortunately it doesn't matter
+    // since m only has 52 significant bits anyway.
+    mantissa <<= 1;
+    exp2 -= 64;  // not needed, but nice for debugging
+
+    // OK, we are here to compare:
+    //     (dddddd + 0.5) * 10^(exp-5)  vs.  mantissa * 2^exp2
+    // so we can round up dddddd if appropriate.  Those values span the full
+    // range of 600 orders of magnitude of IEE 64-bit floating-point.
+    // Fortunately, we already know they are very close, so we don't need to
+    // track the base-2 exponent of both sides.  This greatly simplifies the
+    // the math since the 2^exp2 calculation is unnecessary and the power-of-10
+    // calculation can become a power-of-5 instead.
+
+    std::pair<uint64_t, uint64_t> edge, val;
+    if (exp >= 6) {
+      // Compare (dddddd + 0.5) * 5 ^ (exp - 5) to mantissa
+      // Since we're tossing powers of two, 2 * dddddd + 1 is the
+      // same as dddddd + 0.5
+      edge = PowFive(2 * dddddd + 1, exp - 5);
+
+      val.first = mantissa;
+      val.second = 0;
+    } else {
+      // We can't compare (dddddd + 0.5) * 5 ^ (exp - 5) to mantissa as we did
+      // above because (exp - 5) is negative.  So we compare (dddddd + 0.5) to
+      // mantissa * 5 ^ (5 - exp)
+      edge = PowFive(2 * dddddd + 1, 0);
+
+      val = PowFive(mantissa, 5 - exp);
+    }
+    // printf("exp=%d %016lx %016lx vs %016lx %016lx\n", exp, val.first,
+    //        val.second, edge.first, edge.second);
+    if (val > edge) {
+      dddddd++;
+    } else if (val == edge) {
+      dddddd += (dddddd & 1);
+    }
+  } else {
+    // Here, we are not close to the edge.
+    dddddd = static_cast<int>((d64k + 32768) / 65536);
+  }
+  if (dddddd == 1000000) {
+    dddddd = 100000;
+    exp += 1;
+  }
+  exp_dig.exponent = exp;
+
+  int two_digits = dddddd / 10000;
+  dddddd -= two_digits * 10000;
+  numbers_internal::PutTwoDigits(two_digits, &exp_dig.digits[0]);
+
+  two_digits = dddddd / 100;
+  dddddd -= two_digits * 100;
+  numbers_internal::PutTwoDigits(two_digits, &exp_dig.digits[2]);
+
+  numbers_internal::PutTwoDigits(dddddd, &exp_dig.digits[4]);
+  return exp_dig;
+}
+
+// Helper function for fast formatting of floating-point.
+// The result is the same as "%g", a.k.a. "%.6g".
+size_t numbers_internal::SixDigitsToBuffer(double d, char* const buffer) {
+  static_assert(std::numeric_limits<float>::is_iec559,
+                "IEEE-754/IEC-559 support only");
+
+  char* out = buffer;  // we write data to out, incrementing as we go, but
+                       // FloatToBuffer always returns the address of the buffer
+                       // passed in.
+
+  if (std::isnan(d)) {
+    strcpy(out, "nan");  // NOLINT(runtime/printf)
+    return 3;
+  }
+  if (d == 0) {  // +0 and -0 are handled here
+    if (std::signbit(d)) *out++ = '-';
+    *out++ = '0';
+    *out = 0;
+    return out - buffer;
+  }
+  if (d < 0) {
+    *out++ = '-';
+    d = -d;
+  }
+  if (std::isinf(d)) {
+    strcpy(out, "inf");  // NOLINT(runtime/printf)
+    return out + 3 - buffer;
+  }
+
+  auto exp_dig = SplitToSix(d);
+  int exp = exp_dig.exponent;
+  const char* digits = exp_dig.digits;
+  out[0] = '0';
+  out[1] = '.';
+  switch (exp) {
+    case 5:
+      memcpy(out, &digits[0], 6), out += 6;
+      *out = 0;
+      return out - buffer;
+    case 4:
+      memcpy(out, &digits[0], 5), out += 5;
+      if (digits[5] != '0') {
+        *out++ = '.';
+        *out++ = digits[5];
+      }
+      *out = 0;
+      return out - buffer;
+    case 3:
+      memcpy(out, &digits[0], 4), out += 4;
+      if ((digits[5] | digits[4]) != '0') {
+        *out++ = '.';
+        *out++ = digits[4];
+        if (digits[5] != '0') *out++ = digits[5];
+      }
+      *out = 0;
+      return out - buffer;
+    case 2:
+      memcpy(out, &digits[0], 3), out += 3;
+      *out++ = '.';
+      memcpy(out, &digits[3], 3);
+      out += 3;
+      while (out[-1] == '0') --out;
+      if (out[-1] == '.') --out;
+      *out = 0;
+      return out - buffer;
+    case 1:
+      memcpy(out, &digits[0], 2), out += 2;
+      *out++ = '.';
+      memcpy(out, &digits[2], 4);
+      out += 4;
+      while (out[-1] == '0') --out;
+      if (out[-1] == '.') --out;
+      *out = 0;
+      return out - buffer;
+    case 0:
+      memcpy(out, &digits[0], 1), out += 1;
+      *out++ = '.';
+      memcpy(out, &digits[1], 5);
+      out += 5;
+      while (out[-1] == '0') --out;
+      if (out[-1] == '.') --out;
+      *out = 0;
+      return out - buffer;
+    case -4:
+      out[2] = '0';
+      ++out;
+      ABSL_FALLTHROUGH_INTENDED;
+    case -3:
+      out[2] = '0';
+      ++out;
+      ABSL_FALLTHROUGH_INTENDED;
+    case -2:
+      out[2] = '0';
+      ++out;
+      ABSL_FALLTHROUGH_INTENDED;
+    case -1:
+      out += 2;
+      memcpy(out, &digits[0], 6);
+      out += 6;
+      while (out[-1] == '0') --out;
+      *out = 0;
+      return out - buffer;
+  }
+  assert(exp < -4 || exp >= 6);
+  out[0] = digits[0];
+  assert(out[1] == '.');
+  out += 2;
+  memcpy(out, &digits[1], 5), out += 5;
+  while (out[-1] == '0') --out;
+  if (out[-1] == '.') --out;
+  *out++ = 'e';
+  if (exp > 0) {
+    *out++ = '+';
+  } else {
+    *out++ = '-';
+    exp = -exp;
+  }
+  if (exp > 99) {
+    int dig1 = exp / 100;
+    exp -= dig1 * 100;
+    *out++ = '0' + dig1;
+  }
+  PutTwoDigits(exp, out);
+  out += 2;
+  *out = 0;
+  return out - buffer;
+}
+
+namespace {
+// Represents integer values of digits.
+// Uses 36 to indicate an invalid character since we support
+// bases up to 36.
+static const int8_t kAsciiToInt[256] = {
+    36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,  // 16 36s.
+    36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,
+    36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 0,  1,  2,  3,  4,  5,
+    6,  7,  8,  9,  36, 36, 36, 36, 36, 36, 36, 10, 11, 12, 13, 14, 15, 16, 17,
+    18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36,
+    36, 36, 36, 36, 36, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,
+    24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 36, 36, 36, 36, 36, 36,
+    36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,
+    36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,
+    36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,
+    36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,
+    36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,
+    36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,
+    36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36};
+
+// Parse the sign and optional hex or oct prefix in text.
+inline bool safe_parse_sign_and_base(absl::string_view* text /*inout*/,
+                                     int* base_ptr /*inout*/,
+                                     bool* negative_ptr /*output*/) {
+  if (text->data() == nullptr) {
+    return false;
+  }
+
+  const char* start = text->data();
+  const char* end = start + text->size();
+  int base = *base_ptr;
+
+  // Consume whitespace.
+  while (start < end && absl::ascii_isspace(start[0])) {
+    ++start;
+  }
+  while (start < end && absl::ascii_isspace(end[-1])) {
+    --end;
+  }
+  if (start >= end) {
+    return false;
+  }
+
+  // Consume sign.
+  *negative_ptr = (start[0] == '-');
+  if (*negative_ptr || start[0] == '+') {
+    ++start;
+    if (start >= end) {
+      return false;
+    }
+  }
+
+  // Consume base-dependent prefix.
+  //  base 0: "0x" -> base 16, "0" -> base 8, default -> base 10
+  //  base 16: "0x" -> base 16
+  // Also validate the base.
+  if (base == 0) {
+    if (end - start >= 2 && start[0] == '0' &&
+        (start[1] == 'x' || start[1] == 'X')) {
+      base = 16;
+      start += 2;
+      if (start >= end) {
+        // "0x" with no digits after is invalid.
+        return false;
+      }
+    } else if (end - start >= 1 && start[0] == '0') {
+      base = 8;
+      start += 1;
+    } else {
+      base = 10;
+    }
+  } else if (base == 16) {
+    if (end - start >= 2 && start[0] == '0' &&
+        (start[1] == 'x' || start[1] == 'X')) {
+      start += 2;
+      if (start >= end) {
+        // "0x" with no digits after is invalid.
+        return false;
+      }
+    }
+  } else if (base >= 2 && base <= 36) {
+    // okay
+  } else {
+    return false;
+  }
+  *text = absl::string_view(start, end - start);
+  *base_ptr = base;
+  return true;
+}
+
+// Consume digits.
+//
+// The classic loop:
+//
+//   for each digit
+//     value = value * base + digit
+//   value *= sign
+//
+// The classic loop needs overflow checking.  It also fails on the most
+// negative integer, -2147483648 in 32-bit two's complement representation.
+//
+// My improved loop:
+//
+//  if (!negative)
+//    for each digit
+//      value = value * base
+//      value = value + digit
+//  else
+//    for each digit
+//      value = value * base
+//      value = value - digit
+//
+// Overflow checking becomes simple.
+
+// Lookup tables per IntType:
+// vmax/base and vmin/base are precomputed because division costs at least 8ns.
+// TODO(junyer): Doing this per base instead (i.e. an array of structs, not a
+// struct of arrays) would probably be better in terms of d-cache for the most
+// commonly used bases.
+template <typename IntType>
+struct LookupTables {
+  ABSL_CONST_INIT static const IntType kVmaxOverBase[];
+  ABSL_CONST_INIT static const IntType kVminOverBase[];
+};
+
+// An array initializer macro for X/base where base in [0, 36].
+// However, note that lookups for base in [0, 1] should never happen because
+// base has been validated to be in [2, 36] by safe_parse_sign_and_base().
+#define X_OVER_BASE_INITIALIZER(X)                                        \
+  {                                                                       \
+    0, 0, X / 2, X / 3, X / 4, X / 5, X / 6, X / 7, X / 8, X / 9, X / 10, \
+        X / 11, X / 12, X / 13, X / 14, X / 15, X / 16, X / 17, X / 18,   \
+        X / 19, X / 20, X / 21, X / 22, X / 23, X / 24, X / 25, X / 26,   \
+        X / 27, X / 28, X / 29, X / 30, X / 31, X / 32, X / 33, X / 34,   \
+        X / 35, X / 36,                                                   \
+  }
+
+// uint128& operator/=(uint128) is not constexpr, so hardcode the resulting
+// array to avoid a static initializer.
+template <>
+const uint128 LookupTables<uint128>::kVmaxOverBase[] = {
+    0,
+    0,
+    MakeUint128(9223372036854775807u, 18446744073709551615u),
+    MakeUint128(6148914691236517205u, 6148914691236517205u),
+    MakeUint128(4611686018427387903u, 18446744073709551615u),
+    MakeUint128(3689348814741910323u, 3689348814741910323u),
+    MakeUint128(3074457345618258602u, 12297829382473034410u),
+    MakeUint128(2635249153387078802u, 5270498306774157604u),
+    MakeUint128(2305843009213693951u, 18446744073709551615u),
+    MakeUint128(2049638230412172401u, 14347467612885206812u),
+    MakeUint128(1844674407370955161u, 11068046444225730969u),
+    MakeUint128(1676976733973595601u, 8384883669867978007u),
+    MakeUint128(1537228672809129301u, 6148914691236517205u),
+    MakeUint128(1418980313362273201u, 4256940940086819603u),
+    MakeUint128(1317624576693539401u, 2635249153387078802u),
+    MakeUint128(1229782938247303441u, 1229782938247303441u),
+    MakeUint128(1152921504606846975u, 18446744073709551615u),
+    MakeUint128(1085102592571150095u, 1085102592571150095u),
+    MakeUint128(1024819115206086200u, 16397105843297379214u),
+    MakeUint128(970881267037344821u, 16504981539634861972u),
+    MakeUint128(922337203685477580u, 14757395258967641292u),
+    MakeUint128(878416384462359600u, 14054662151397753612u),
+    MakeUint128(838488366986797800u, 13415813871788764811u),
+    MakeUint128(802032351030850070u, 4812194106185100421u),
+    MakeUint128(768614336404564650u, 12297829382473034410u),
+    MakeUint128(737869762948382064u, 11805916207174113034u),
+    MakeUint128(709490156681136600u, 11351842506898185609u),
+    MakeUint128(683212743470724133u, 17080318586768103348u),
+    MakeUint128(658812288346769700u, 10540996613548315209u),
+    MakeUint128(636094623231363848u, 15266270957552732371u),
+    MakeUint128(614891469123651720u, 9838263505978427528u),
+    MakeUint128(595056260442243600u, 9520900167075897608u),
+    MakeUint128(576460752303423487u, 18446744073709551615u),
+    MakeUint128(558992244657865200u, 8943875914525843207u),
+    MakeUint128(542551296285575047u, 9765923333140350855u),
+    MakeUint128(527049830677415760u, 8432797290838652167u),
+    MakeUint128(512409557603043100u, 8198552921648689607u),
+};
+
+template <typename IntType>
+const IntType LookupTables<IntType>::kVmaxOverBase[] =
+    X_OVER_BASE_INITIALIZER(std::numeric_limits<IntType>::max());
+
+template <typename IntType>
+const IntType LookupTables<IntType>::kVminOverBase[] =
+    X_OVER_BASE_INITIALIZER(std::numeric_limits<IntType>::min());
+
+#undef X_OVER_BASE_INITIALIZER
+
+template <typename IntType>
+inline bool safe_parse_positive_int(absl::string_view text, int base,
+                                    IntType* value_p) {
+  IntType value = 0;
+  const IntType vmax = std::numeric_limits<IntType>::max();
+  assert(vmax > 0);
+  assert(base >= 0);
+  assert(vmax >= static_cast<IntType>(base));
+  const IntType vmax_over_base = LookupTables<IntType>::kVmaxOverBase[base];
+  assert(base < 2 ||
+         std::numeric_limits<IntType>::max() / base == vmax_over_base);
+  const char* start = text.data();
+  const char* end = start + text.size();
+  // loop over digits
+  for (; start < end; ++start) {
+    unsigned char c = static_cast<unsigned char>(start[0]);
+    int digit = kAsciiToInt[c];
+    if (digit >= base) {
+      *value_p = value;
+      return false;
+    }
+    if (value > vmax_over_base) {
+      *value_p = vmax;
+      return false;
+    }
+    value *= base;
+    if (value > vmax - digit) {
+      *value_p = vmax;
+      return false;
+    }
+    value += digit;
+  }
+  *value_p = value;
+  return true;
+}
+
+template <typename IntType>
+inline bool safe_parse_negative_int(absl::string_view text, int base,
+                                    IntType* value_p) {
+  IntType value = 0;
+  const IntType vmin = std::numeric_limits<IntType>::min();
+  assert(vmin < 0);
+  assert(vmin <= 0 - base);
+  IntType vmin_over_base = LookupTables<IntType>::kVminOverBase[base];
+  assert(base < 2 ||
+         std::numeric_limits<IntType>::min() / base == vmin_over_base);
+  // 2003 c++ standard [expr.mul]
+  // "... the sign of the remainder is implementation-defined."
+  // Although (vmin/base)*base + vmin%base is always vmin.
+  // 2011 c++ standard tightens the spec but we cannot rely on it.
+  // TODO(junyer): Handle this in the lookup table generation.
+  if (vmin % base > 0) {
+    vmin_over_base += 1;
+  }
+  const char* start = text.data();
+  const char* end = start + text.size();
+  // loop over digits
+  for (; start < end; ++start) {
+    unsigned char c = static_cast<unsigned char>(start[0]);
+    int digit = kAsciiToInt[c];
+    if (digit >= base) {
+      *value_p = value;
+      return false;
+    }
+    if (value < vmin_over_base) {
+      *value_p = vmin;
+      return false;
+    }
+    value *= base;
+    if (value < vmin + digit) {
+      *value_p = vmin;
+      return false;
+    }
+    value -= digit;
+  }
+  *value_p = value;
+  return true;
+}
+
+// Input format based on POSIX.1-2008 strtol
+// http://pubs.opengroup.org/onlinepubs/9699919799/functions/strtol.html
+template <typename IntType>
+inline bool safe_int_internal(absl::string_view text, IntType* value_p,
+                              int base) {
+  *value_p = 0;
+  bool negative;
+  if (!safe_parse_sign_and_base(&text, &base, &negative)) {
+    return false;
+  }
+  if (!negative) {
+    return safe_parse_positive_int(text, base, value_p);
+  } else {
+    return safe_parse_negative_int(text, base, value_p);
+  }
+}
+
+template <typename IntType>
+inline bool safe_uint_internal(absl::string_view text, IntType* value_p,
+                               int base) {
+  *value_p = 0;
+  bool negative;
+  if (!safe_parse_sign_and_base(&text, &base, &negative) || negative) {
+    return false;
+  }
+  return safe_parse_positive_int(text, base, value_p);
+}
+}  // anonymous namespace
+
+namespace numbers_internal {
+
+// Digit conversion.
+ABSL_CONST_INIT ABSL_DLL const char kHexChar[] =
+    "0123456789abcdef";
+
+ABSL_CONST_INIT ABSL_DLL const char kHexTable[513] =
+    "000102030405060708090a0b0c0d0e0f"
+    "101112131415161718191a1b1c1d1e1f"
+    "202122232425262728292a2b2c2d2e2f"
+    "303132333435363738393a3b3c3d3e3f"
+    "404142434445464748494a4b4c4d4e4f"
+    "505152535455565758595a5b5c5d5e5f"
+    "606162636465666768696a6b6c6d6e6f"
+    "707172737475767778797a7b7c7d7e7f"
+    "808182838485868788898a8b8c8d8e8f"
+    "909192939495969798999a9b9c9d9e9f"
+    "a0a1a2a3a4a5a6a7a8a9aaabacadaeaf"
+    "b0b1b2b3b4b5b6b7b8b9babbbcbdbebf"
+    "c0c1c2c3c4c5c6c7c8c9cacbcccdcecf"
+    "d0d1d2d3d4d5d6d7d8d9dadbdcdddedf"
+    "e0e1e2e3e4e5e6e7e8e9eaebecedeeef"
+    "f0f1f2f3f4f5f6f7f8f9fafbfcfdfeff";
+
+ABSL_CONST_INIT ABSL_DLL const char two_ASCII_digits[100][2] = {
+    {'0', '0'}, {'0', '1'}, {'0', '2'}, {'0', '3'}, {'0', '4'}, {'0', '5'},
+    {'0', '6'}, {'0', '7'}, {'0', '8'}, {'0', '9'}, {'1', '0'}, {'1', '1'},
+    {'1', '2'}, {'1', '3'}, {'1', '4'}, {'1', '5'}, {'1', '6'}, {'1', '7'},
+    {'1', '8'}, {'1', '9'}, {'2', '0'}, {'2', '1'}, {'2', '2'}, {'2', '3'},
+    {'2', '4'}, {'2', '5'}, {'2', '6'}, {'2', '7'}, {'2', '8'}, {'2', '9'},
+    {'3', '0'}, {'3', '1'}, {'3', '2'}, {'3', '3'}, {'3', '4'}, {'3', '5'},
+    {'3', '6'}, {'3', '7'}, {'3', '8'}, {'3', '9'}, {'4', '0'}, {'4', '1'},
+    {'4', '2'}, {'4', '3'}, {'4', '4'}, {'4', '5'}, {'4', '6'}, {'4', '7'},
+    {'4', '8'}, {'4', '9'}, {'5', '0'}, {'5', '1'}, {'5', '2'}, {'5', '3'},
+    {'5', '4'}, {'5', '5'}, {'5', '6'}, {'5', '7'}, {'5', '8'}, {'5', '9'},
+    {'6', '0'}, {'6', '1'}, {'6', '2'}, {'6', '3'}, {'6', '4'}, {'6', '5'},
+    {'6', '6'}, {'6', '7'}, {'6', '8'}, {'6', '9'}, {'7', '0'}, {'7', '1'},
+    {'7', '2'}, {'7', '3'}, {'7', '4'}, {'7', '5'}, {'7', '6'}, {'7', '7'},
+    {'7', '8'}, {'7', '9'}, {'8', '0'}, {'8', '1'}, {'8', '2'}, {'8', '3'},
+    {'8', '4'}, {'8', '5'}, {'8', '6'}, {'8', '7'}, {'8', '8'}, {'8', '9'},
+    {'9', '0'}, {'9', '1'}, {'9', '2'}, {'9', '3'}, {'9', '4'}, {'9', '5'},
+    {'9', '6'}, {'9', '7'}, {'9', '8'}, {'9', '9'}};
+
+bool safe_strto32_base(absl::string_view text, int32_t* value, int base) {
+  return safe_int_internal<int32_t>(text, value, base);
+}
+
+bool safe_strto64_base(absl::string_view text, int64_t* value, int base) {
+  return safe_int_internal<int64_t>(text, value, base);
+}
+
+bool safe_strtou32_base(absl::string_view text, uint32_t* value, int base) {
+  return safe_uint_internal<uint32_t>(text, value, base);
+}
+
+bool safe_strtou64_base(absl::string_view text, uint64_t* value, int base) {
+  return safe_uint_internal<uint64_t>(text, value, base);
+}
+
+bool safe_strtou128_base(absl::string_view text, uint128* value, int base) {
+  return safe_uint_internal<absl::uint128>(text, value, base);
+}
+
+}  // namespace numbers_internal
+ABSL_NAMESPACE_END
+}  // namespace absl