grpc 1.26.0 → 1.30.0

data/third_party/boringssl/crypto/fipsmodule/digest/digests.c

@@ -1,280 +0,0 @@
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.] */
-
-#include <openssl/digest.h>
-
-#include <assert.h>
-#include <string.h>
-
-#include <openssl/md4.h>
-#include <openssl/md5.h>
-#include <openssl/nid.h>
-#include <openssl/sha.h>
-
-#include "internal.h"
-#include "../delocate.h"
-#include "../../internal.h"
-
-#if defined(NDEBUG)
-#define CHECK(x) (void) (x)
-#else
-#define CHECK(x) assert(x)
-#endif
-
-
-static void md4_init(EVP_MD_CTX *ctx) {
-  CHECK(MD4_Init(ctx->md_data));
-}
-
-static void md4_update(EVP_MD_CTX *ctx, const void *data, size_t count) {
-  CHECK(MD4_Update(ctx->md_data, data, count));
-}
-
-static void md4_final(EVP_MD_CTX *ctx, uint8_t *out) {
-  CHECK(MD4_Final(out, ctx->md_data));
-}
-
-DEFINE_METHOD_FUNCTION(EVP_MD, EVP_md4) {
-  out->type = NID_md4;
-  out->md_size = MD4_DIGEST_LENGTH;
-  out->flags = 0;
-  out->init = md4_init;
-  out->update = md4_update;
-  out->final = md4_final;
-  out->block_size = 64;
-  out->ctx_size = sizeof(MD4_CTX);
-}
-
-
-static void md5_init(EVP_MD_CTX *ctx) {
-  CHECK(MD5_Init(ctx->md_data));
-}
-
-static void md5_update(EVP_MD_CTX *ctx, const void *data, size_t count) {
-  CHECK(MD5_Update(ctx->md_data, data, count));
-}
-
-static void md5_final(EVP_MD_CTX *ctx, uint8_t *out) {
-  CHECK(MD5_Final(out, ctx->md_data));
-}
-
-DEFINE_METHOD_FUNCTION(EVP_MD, EVP_md5) {
-  out->type = NID_md5;
-  out->md_size = MD5_DIGEST_LENGTH;
-  out->flags = 0;
-  out->init = md5_init;
-  out->update = md5_update;
-  out->final = md5_final;
-  out->block_size = 64;
-  out->ctx_size = sizeof(MD5_CTX);
-}
-
-
-static void sha1_init(EVP_MD_CTX *ctx) {
-  CHECK(SHA1_Init(ctx->md_data));
-}
-
-static void sha1_update(EVP_MD_CTX *ctx, const void *data, size_t count) {
-  CHECK(SHA1_Update(ctx->md_data, data, count));
-}
-
-static void sha1_final(EVP_MD_CTX *ctx, uint8_t *md) {
-  CHECK(SHA1_Final(md, ctx->md_data));
-}
-
-DEFINE_METHOD_FUNCTION(EVP_MD, EVP_sha1) {
-  out->type = NID_sha1;
-  out->md_size = SHA_DIGEST_LENGTH;
-  out->flags = 0;
-  out->init = sha1_init;
-  out->update = sha1_update;
-  out->final = sha1_final;
-  out->block_size = 64;
-  out->ctx_size = sizeof(SHA_CTX);
-}
-
-
-static void sha224_init(EVP_MD_CTX *ctx) {
-  CHECK(SHA224_Init(ctx->md_data));
-}
-
-static void sha224_update(EVP_MD_CTX *ctx, const void *data, size_t count) {
-  CHECK(SHA224_Update(ctx->md_data, data, count));
-}
-
-static void sha224_final(EVP_MD_CTX *ctx, uint8_t *md) {
-  CHECK(SHA224_Final(md, ctx->md_data));
-}
-
-DEFINE_METHOD_FUNCTION(EVP_MD, EVP_sha224) {
-  out->type = NID_sha224;
-  out->md_size = SHA224_DIGEST_LENGTH;
-  out->flags = 0;
-  out->init = sha224_init;
-  out->update = sha224_update;
-  out->final = sha224_final;
-  out->block_size = 64;
-  out->ctx_size = sizeof(SHA256_CTX);
-}
-
-
-static void sha256_init(EVP_MD_CTX *ctx) {
-  CHECK(SHA256_Init(ctx->md_data));
-}
-
-static void sha256_update(EVP_MD_CTX *ctx, const void *data, size_t count) {
-  CHECK(SHA256_Update(ctx->md_data, data, count));
-}
-
-static void sha256_final(EVP_MD_CTX *ctx, uint8_t *md) {
-  CHECK(SHA256_Final(md, ctx->md_data));
-}
-
-DEFINE_METHOD_FUNCTION(EVP_MD, EVP_sha256) {
-  out->type = NID_sha256;
-  out->md_size = SHA256_DIGEST_LENGTH;
-  out->flags = 0;
-  out->init = sha256_init;
-  out->update = sha256_update;
-  out->final = sha256_final;
-  out->block_size = 64;
-  out->ctx_size = sizeof(SHA256_CTX);
-}
-
-
-static void sha384_init(EVP_MD_CTX *ctx) {
-  CHECK(SHA384_Init(ctx->md_data));
-}
-
-static void sha384_update(EVP_MD_CTX *ctx, const void *data, size_t count) {
-  CHECK(SHA384_Update(ctx->md_data, data, count));
-}
-
-static void sha384_final(EVP_MD_CTX *ctx, uint8_t *md) {
-  CHECK(SHA384_Final(md, ctx->md_data));
-}
-
-DEFINE_METHOD_FUNCTION(EVP_MD, EVP_sha384) {
-  out->type = NID_sha384;
-  out->md_size = SHA384_DIGEST_LENGTH;
-  out->flags = 0;
-  out->init = sha384_init;
-  out->update = sha384_update;
-  out->final = sha384_final;
-  out->block_size = 128;
-  out->ctx_size = sizeof(SHA512_CTX);
-}
-
-
-static void sha512_init(EVP_MD_CTX *ctx) {
-  CHECK(SHA512_Init(ctx->md_data));
-}
-
-static void sha512_update(EVP_MD_CTX *ctx, const void *data, size_t count) {
-  CHECK(SHA512_Update(ctx->md_data, data, count));
-}
-
-static void sha512_final(EVP_MD_CTX *ctx, uint8_t *md) {
-  CHECK(SHA512_Final(md, ctx->md_data));
-}
-
-DEFINE_METHOD_FUNCTION(EVP_MD, EVP_sha512) {
-  out->type = NID_sha512;
-  out->md_size = SHA512_DIGEST_LENGTH;
-  out->flags = 0;
-  out->init = sha512_init;
-  out->update = sha512_update;
-  out->final = sha512_final;
-  out->block_size = 128;
-  out->ctx_size = sizeof(SHA512_CTX);
-}
-
-
-typedef struct {
-  MD5_CTX md5;
-  SHA_CTX sha1;
-} MD5_SHA1_CTX;
-
-static void md5_sha1_init(EVP_MD_CTX *md_ctx) {
-  MD5_SHA1_CTX *ctx = md_ctx->md_data;
-  CHECK(MD5_Init(&ctx->md5) && SHA1_Init(&ctx->sha1));
-}
-
-static void md5_sha1_update(EVP_MD_CTX *md_ctx, const void *data,
-                            size_t count) {
-  MD5_SHA1_CTX *ctx = md_ctx->md_data;
-  CHECK(MD5_Update(&ctx->md5, data, count) &&
-        SHA1_Update(&ctx->sha1, data, count));
-}
-
-static void md5_sha1_final(EVP_MD_CTX *md_ctx, uint8_t *out) {
-  MD5_SHA1_CTX *ctx = md_ctx->md_data;
-  CHECK(MD5_Final(out, &ctx->md5) &&
-        SHA1_Final(out + MD5_DIGEST_LENGTH, &ctx->sha1));
-}
-
-DEFINE_METHOD_FUNCTION(EVP_MD, EVP_md5_sha1) {
-  out->type = NID_md5_sha1;
-  out->md_size = MD5_DIGEST_LENGTH + SHA_DIGEST_LENGTH;
-  out->flags = 0;
-  out->init = md5_sha1_init;
-  out->update = md5_sha1_update;
-  out->final = md5_sha1_final;
-  out->block_size = 64;
-  out->ctx_size = sizeof(MD5_SHA1_CTX);
-}
-
-#undef CHECK

data/third_party/boringssl/crypto/fipsmodule/ec/ec.c

@@ -1,1080 +0,0 @@
-/* Originally written by Bodo Moeller for the OpenSSL project.
- * ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the OpenSSL open source
- * license provided above.
- *
- * The elliptic curve binary polynomial software is originally written by
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems
- * Laboratories. */
-
-#include <openssl/ec.h>
-
-#include <assert.h>
-#include <string.h>
-
-#include <openssl/bn.h>
-#include <openssl/err.h>
-#include <openssl/mem.h>
-#include <openssl/nid.h>
-
-#include "internal.h"
-#include "../../internal.h"
-#include "../bn/internal.h"
-#include "../delocate.h"
-
-
-static void ec_point_free(EC_POINT *point, int free_group);
-
-static const uint8_t kP224Params[6 * 28] = {
-    // p
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x01,
-    // a
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFE,
-    // b
-    0xB4, 0x05, 0x0A, 0x85, 0x0C, 0x04, 0xB3, 0xAB, 0xF5, 0x41, 0x32, 0x56,
-    0x50, 0x44, 0xB0, 0xB7, 0xD7, 0xBF, 0xD8, 0xBA, 0x27, 0x0B, 0x39, 0x43,
-    0x23, 0x55, 0xFF, 0xB4,
-    // x
-    0xB7, 0x0E, 0x0C, 0xBD, 0x6B, 0xB4, 0xBF, 0x7F, 0x32, 0x13, 0x90, 0xB9,
-    0x4A, 0x03, 0xC1, 0xD3, 0x56, 0xC2, 0x11, 0x22, 0x34, 0x32, 0x80, 0xD6,
-    0x11, 0x5C, 0x1D, 0x21,
-    // y
-    0xbd, 0x37, 0x63, 0x88, 0xb5, 0xf7, 0x23, 0xfb, 0x4c, 0x22, 0xdf, 0xe6,
-    0xcd, 0x43, 0x75, 0xa0, 0x5a, 0x07, 0x47, 0x64, 0x44, 0xd5, 0x81, 0x99,
-    0x85, 0x00, 0x7e, 0x34,
-    // order
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0x16, 0xA2, 0xE0, 0xB8, 0xF0, 0x3E, 0x13, 0xDD, 0x29, 0x45,
-    0x5C, 0x5C, 0x2A, 0x3D,
-};
-
-static const uint8_t kP256Params[6 * 32] = {
-    // p
-    0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    // a
-    0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-    // b
-    0x5A, 0xC6, 0x35, 0xD8, 0xAA, 0x3A, 0x93, 0xE7, 0xB3, 0xEB, 0xBD, 0x55,
-    0x76, 0x98, 0x86, 0xBC, 0x65, 0x1D, 0x06, 0xB0, 0xCC, 0x53, 0xB0, 0xF6,
-    0x3B, 0xCE, 0x3C, 0x3E, 0x27, 0xD2, 0x60, 0x4B,
-    // x
-    0x6B, 0x17, 0xD1, 0xF2, 0xE1, 0x2C, 0x42, 0x47, 0xF8, 0xBC, 0xE6, 0xE5,
-    0x63, 0xA4, 0x40, 0xF2, 0x77, 0x03, 0x7D, 0x81, 0x2D, 0xEB, 0x33, 0xA0,
-    0xF4, 0xA1, 0x39, 0x45, 0xD8, 0x98, 0xC2, 0x96,
-    // y
-    0x4f, 0xe3, 0x42, 0xe2, 0xfe, 0x1a, 0x7f, 0x9b, 0x8e, 0xe7, 0xeb, 0x4a,
-    0x7c, 0x0f, 0x9e, 0x16, 0x2b, 0xce, 0x33, 0x57, 0x6b, 0x31, 0x5e, 0xce,
-    0xcb, 0xb6, 0x40, 0x68, 0x37, 0xbf, 0x51, 0xf5,
-    // order
-    0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xBC, 0xE6, 0xFA, 0xAD, 0xA7, 0x17, 0x9E, 0x84,
-    0xF3, 0xB9, 0xCA, 0xC2, 0xFC, 0x63, 0x25, 0x51,
-};
-
-static const uint8_t kP384Params[6 * 48] = {
-    // p
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0xFF, 0xFF, 0xFF, 0xFF,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF,
-    // a
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0xFF, 0xFF, 0xFF, 0xFF,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFC,
-    // b
-    0xB3, 0x31, 0x2F, 0xA7, 0xE2, 0x3E, 0xE7, 0xE4, 0x98, 0x8E, 0x05, 0x6B,
-    0xE3, 0xF8, 0x2D, 0x19, 0x18, 0x1D, 0x9C, 0x6E, 0xFE, 0x81, 0x41, 0x12,
-    0x03, 0x14, 0x08, 0x8F, 0x50, 0x13, 0x87, 0x5A, 0xC6, 0x56, 0x39, 0x8D,
-    0x8A, 0x2E, 0xD1, 0x9D, 0x2A, 0x85, 0xC8, 0xED, 0xD3, 0xEC, 0x2A, 0xEF,
-    // x
-    0xAA, 0x87, 0xCA, 0x22, 0xBE, 0x8B, 0x05, 0x37, 0x8E, 0xB1, 0xC7, 0x1E,
-    0xF3, 0x20, 0xAD, 0x74, 0x6E, 0x1D, 0x3B, 0x62, 0x8B, 0xA7, 0x9B, 0x98,
-    0x59, 0xF7, 0x41, 0xE0, 0x82, 0x54, 0x2A, 0x38, 0x55, 0x02, 0xF2, 0x5D,
-    0xBF, 0x55, 0x29, 0x6C, 0x3A, 0x54, 0x5E, 0x38, 0x72, 0x76, 0x0A, 0xB7,
-    // y
-    0x36, 0x17, 0xde, 0x4a, 0x96, 0x26, 0x2c, 0x6f, 0x5d, 0x9e, 0x98, 0xbf,
-    0x92, 0x92, 0xdc, 0x29, 0xf8, 0xf4, 0x1d, 0xbd, 0x28, 0x9a, 0x14, 0x7c,
-    0xe9, 0xda, 0x31, 0x13, 0xb5, 0xf0, 0xb8, 0xc0, 0x0a, 0x60, 0xb1, 0xce,
-    0x1d, 0x7e, 0x81, 0x9d, 0x7a, 0x43, 0x1d, 0x7c, 0x90, 0xea, 0x0e, 0x5f,
-    // order
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xC7, 0x63, 0x4D, 0x81, 0xF4, 0x37, 0x2D, 0xDF, 0x58, 0x1A, 0x0D, 0xB2,
-    0x48, 0xB0, 0xA7, 0x7A, 0xEC, 0xEC, 0x19, 0x6A, 0xCC, 0xC5, 0x29, 0x73,
-};
-
-static const uint8_t kP521Params[6 * 66] = {
-    // p
-    0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    // a
-    0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-    // b
-    0x00, 0x51, 0x95, 0x3E, 0xB9, 0x61, 0x8E, 0x1C, 0x9A, 0x1F, 0x92, 0x9A,
-    0x21, 0xA0, 0xB6, 0x85, 0x40, 0xEE, 0xA2, 0xDA, 0x72, 0x5B, 0x99, 0xB3,
-    0x15, 0xF3, 0xB8, 0xB4, 0x89, 0x91, 0x8E, 0xF1, 0x09, 0xE1, 0x56, 0x19,
-    0x39, 0x51, 0xEC, 0x7E, 0x93, 0x7B, 0x16, 0x52, 0xC0, 0xBD, 0x3B, 0xB1,
-    0xBF, 0x07, 0x35, 0x73, 0xDF, 0x88, 0x3D, 0x2C, 0x34, 0xF1, 0xEF, 0x45,
-    0x1F, 0xD4, 0x6B, 0x50, 0x3F, 0x00,
-    // x
-    0x00, 0xC6, 0x85, 0x8E, 0x06, 0xB7, 0x04, 0x04, 0xE9, 0xCD, 0x9E, 0x3E,
-    0xCB, 0x66, 0x23, 0x95, 0xB4, 0x42, 0x9C, 0x64, 0x81, 0x39, 0x05, 0x3F,
-    0xB5, 0x21, 0xF8, 0x28, 0xAF, 0x60, 0x6B, 0x4D, 0x3D, 0xBA, 0xA1, 0x4B,
-    0x5E, 0x77, 0xEF, 0xE7, 0x59, 0x28, 0xFE, 0x1D, 0xC1, 0x27, 0xA2, 0xFF,
-    0xA8, 0xDE, 0x33, 0x48, 0xB3, 0xC1, 0x85, 0x6A, 0x42, 0x9B, 0xF9, 0x7E,
-    0x7E, 0x31, 0xC2, 0xE5, 0xBD, 0x66,
-    // y
-    0x01, 0x18, 0x39, 0x29, 0x6a, 0x78, 0x9a, 0x3b, 0xc0, 0x04, 0x5c, 0x8a,
-    0x5f, 0xb4, 0x2c, 0x7d, 0x1b, 0xd9, 0x98, 0xf5, 0x44, 0x49, 0x57, 0x9b,
-    0x44, 0x68, 0x17, 0xaf, 0xbd, 0x17, 0x27, 0x3e, 0x66, 0x2c, 0x97, 0xee,
-    0x72, 0x99, 0x5e, 0xf4, 0x26, 0x40, 0xc5, 0x50, 0xb9, 0x01, 0x3f, 0xad,
-    0x07, 0x61, 0x35, 0x3c, 0x70, 0x86, 0xa2, 0x72, 0xc2, 0x40, 0x88, 0xbe,
-    0x94, 0x76, 0x9f, 0xd1, 0x66, 0x50,
-    // order
-    0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFA, 0x51, 0x86,
-    0x87, 0x83, 0xBF, 0x2F, 0x96, 0x6B, 0x7F, 0xCC, 0x01, 0x48, 0xF7, 0x09,
-    0xA5, 0xD0, 0x3B, 0xB5, 0xC9, 0xB8, 0x89, 0x9C, 0x47, 0xAE, 0xBB, 0x6F,
-    0xB7, 0x1E, 0x91, 0x38, 0x64, 0x09,
-};
-
-DEFINE_METHOD_FUNCTION(struct built_in_curves, OPENSSL_built_in_curves) {
-  // 1.3.132.0.35
-  static const uint8_t kOIDP521[] = {0x2b, 0x81, 0x04, 0x00, 0x23};
-  out->curves[0].nid = NID_secp521r1;
-  out->curves[0].oid = kOIDP521;
-  out->curves[0].oid_len = sizeof(kOIDP521);
-  out->curves[0].comment = "NIST P-521";
-  out->curves[0].param_len = 66;
-  out->curves[0].params = kP521Params;
-  out->curves[0].method = EC_GFp_mont_method();
-
-  // 1.3.132.0.34
-  static const uint8_t kOIDP384[] = {0x2b, 0x81, 0x04, 0x00, 0x22};
-  out->curves[1].nid = NID_secp384r1;
-  out->curves[1].oid = kOIDP384;
-  out->curves[1].oid_len = sizeof(kOIDP384);
-  out->curves[1].comment = "NIST P-384";
-  out->curves[1].param_len = 48;
-  out->curves[1].params = kP384Params;
-  out->curves[1].method = EC_GFp_mont_method();
-
-  // 1.2.840.10045.3.1.7
-  static const uint8_t kOIDP256[] = {0x2a, 0x86, 0x48, 0xce,
-                                     0x3d, 0x03, 0x01, 0x07};
-  out->curves[2].nid = NID_X9_62_prime256v1;
-  out->curves[2].oid = kOIDP256;
-  out->curves[2].oid_len = sizeof(kOIDP256);
-  out->curves[2].comment = "NIST P-256";
-  out->curves[2].param_len = 32;
-  out->curves[2].params = kP256Params;
-  out->curves[2].method =
-#if !defined(OPENSSL_NO_ASM) && defined(OPENSSL_X86_64) && \
-    !defined(OPENSSL_SMALL)
-      EC_GFp_nistz256_method();
-#else
-      EC_GFp_nistp256_method();
-#endif
-
-  // 1.3.132.0.33
-  static const uint8_t kOIDP224[] = {0x2b, 0x81, 0x04, 0x00, 0x21};
-  out->curves[3].nid = NID_secp224r1;
-  out->curves[3].oid = kOIDP224;
-  out->curves[3].oid_len = sizeof(kOIDP224);
-  out->curves[3].comment = "NIST P-224";
-  out->curves[3].param_len = 28;
-  out->curves[3].params = kP224Params;
-  out->curves[3].method =
-#if defined(BORINGSSL_HAS_UINT128) && !defined(OPENSSL_SMALL)
-      EC_GFp_nistp224_method();
-#else
-      EC_GFp_mont_method();
-#endif
-}
-
-EC_GROUP *ec_group_new(const EC_METHOD *meth) {
-  EC_GROUP *ret;
-
-  if (meth == NULL) {
-    OPENSSL_PUT_ERROR(EC, EC_R_SLOT_FULL);
-    return NULL;
-  }
-
-  if (meth->group_init == 0) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-    return NULL;
-  }
-
-  ret = OPENSSL_malloc(sizeof(EC_GROUP));
-  if (ret == NULL) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_MALLOC_FAILURE);
-    return NULL;
-  }
-  OPENSSL_memset(ret, 0, sizeof(EC_GROUP));
-
-  ret->references = 1;
-  ret->meth = meth;
-  BN_init(&ret->order);
-
-  if (!meth->group_init(ret)) {
-    OPENSSL_free(ret);
-    return NULL;
-  }
-
-  return ret;
-}
-
-static void ec_group_set0_generator(EC_GROUP *group, EC_POINT *generator) {
-  assert(group->generator == NULL);
-  assert(group == generator->group);
-
-  // Avoid a reference cycle. |group->generator| does not maintain an owning
-  // pointer to |group|.
-  group->generator = generator;
-  int is_zero = CRYPTO_refcount_dec_and_test_zero(&group->references);
-
-  assert(!is_zero);
-  (void)is_zero;
-}
-
-EC_GROUP *EC_GROUP_new_curve_GFp(const BIGNUM *p, const BIGNUM *a,
-                                 const BIGNUM *b, BN_CTX *ctx) {
-  if (BN_num_bytes(p) > EC_MAX_BYTES) {
-    OPENSSL_PUT_ERROR(EC, EC_R_INVALID_FIELD);
-    return NULL;
-  }
-
-  EC_GROUP *ret = ec_group_new(EC_GFp_mont_method());
-  if (ret == NULL) {
-    return NULL;
-  }
-
-  if (ret->meth->group_set_curve == NULL) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-    EC_GROUP_free(ret);
-    return NULL;
-  }
-  if (!ret->meth->group_set_curve(ret, p, a, b, ctx)) {
-    EC_GROUP_free(ret);
-    return NULL;
-  }
-  return ret;
-}
-
-int EC_GROUP_set_generator(EC_GROUP *group, const EC_POINT *generator,
-                           const BIGNUM *order, const BIGNUM *cofactor) {
-  if (group->curve_name != NID_undef || group->generator != NULL ||
-      generator->group != group) {
-    // |EC_GROUP_set_generator| may only be used with |EC_GROUP|s returned by
-    // |EC_GROUP_new_curve_GFp| and may only used once on each group.
-    // |generator| must have been created from |EC_GROUP_new_curve_GFp|, not a
-    // copy, so that |generator->group->generator| is set correctly.
-    OPENSSL_PUT_ERROR(EC, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-    return 0;
-  }
-
-  if (BN_num_bytes(order) > EC_MAX_BYTES) {
-    OPENSSL_PUT_ERROR(EC, EC_R_INVALID_GROUP_ORDER);
-    return 0;
-  }
-
-  // Require a cofactor of one for custom curves, which implies prime order.
-  if (!BN_is_one(cofactor)) {
-    OPENSSL_PUT_ERROR(EC, EC_R_INVALID_COFACTOR);
-    return 0;
-  }
-
-  // Require that p < 2×order. This simplifies some ECDSA operations.
-  //
-  // Note any curve which did not satisfy this must have been invalid or use a
-  // tiny prime (less than 17). See the proof in |field_element_to_scalar| in
-  // the ECDSA implementation.
-  int ret = 0;
-  EC_POINT *copy = NULL;
-  BIGNUM *tmp = BN_new();
-  if (tmp == NULL ||
-      !BN_lshift1(tmp, order)) {
-    goto err;
-  }
-  if (BN_cmp(tmp, &group->field) <= 0) {
-    OPENSSL_PUT_ERROR(EC, EC_R_INVALID_GROUP_ORDER);
-    goto err;
-  }
-
-  copy = EC_POINT_new(group);
-  if (copy == NULL ||
-      !EC_POINT_copy(copy, generator) ||
-      !BN_copy(&group->order, order)) {
-    goto err;
-  }
-  // Store the order in minimal form, so it can be used with |BN_ULONG| arrays.
-  bn_set_minimal_width(&group->order);
-
-  BN_MONT_CTX_free(group->order_mont);
-  group->order_mont = BN_MONT_CTX_new_for_modulus(&group->order, NULL);
-  if (group->order_mont == NULL) {
-    goto err;
-  }
-
-  group->field_greater_than_order = BN_cmp(&group->field, &group->order) > 0;
-  if (group->field_greater_than_order) {
-    if (!BN_sub(tmp, &group->field, &group->order) ||
-        !bn_copy_words(group->field_minus_order.words, group->field.width,
-                       tmp)) {
-      goto err;
-    }
-  }
-
-  ec_group_set0_generator(group, copy);
-  copy = NULL;
-  ret = 1;
-
-err:
-  EC_POINT_free(copy);
-  BN_free(tmp);
-  return ret;
-}
-
-static EC_GROUP *ec_group_new_from_data(const struct built_in_curve *curve) {
-  EC_GROUP *group = NULL;
-  EC_POINT *P = NULL;
-  BIGNUM *p = NULL, *a = NULL, *b = NULL, *x = NULL, *y = NULL;
-  int ok = 0;
-
-  BN_CTX *ctx = BN_CTX_new();
-  if (ctx == NULL) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_MALLOC_FAILURE);
-    goto err;
-  }
-
-  const unsigned param_len = curve->param_len;
-  const uint8_t *params = curve->params;
-
-  if (!(p = BN_bin2bn(params + 0 * param_len, param_len, NULL)) ||
-      !(a = BN_bin2bn(params + 1 * param_len, param_len, NULL)) ||
-      !(b = BN_bin2bn(params + 2 * param_len, param_len, NULL))) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_BN_LIB);
-    goto err;
-  }
-
-  group = ec_group_new(curve->method);
-  if (group == NULL ||
-      !group->meth->group_set_curve(group, p, a, b, ctx)) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_EC_LIB);
-    goto err;
-  }
-
-  if ((P = EC_POINT_new(group)) == NULL) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_EC_LIB);
-    goto err;
-  }
-
-  if (!(x = BN_bin2bn(params + 3 * param_len, param_len, NULL)) ||
-      !(y = BN_bin2bn(params + 4 * param_len, param_len, NULL))) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_BN_LIB);
-    goto err;
-  }
-
-  if (!EC_POINT_set_affine_coordinates_GFp(group, P, x, y, ctx)) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_EC_LIB);
-    goto err;
-  }
-  if (!BN_bin2bn(params + 5 * param_len, param_len, &group->order)) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_BN_LIB);
-    goto err;
-  }
-
-  group->field_greater_than_order = BN_cmp(&group->field, &group->order) > 0;
-  if (group->field_greater_than_order) {
-    if (!BN_sub(p, &group->field, &group->order) ||
-        !bn_copy_words(group->field_minus_order.words, group->field.width, p)) {
-      goto err;
-    }
-  }
-
-  group->order_mont = BN_MONT_CTX_new_for_modulus(&group->order, ctx);
-  if (group->order_mont == NULL) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_BN_LIB);
-    goto err;
-  }
-
-  ec_group_set0_generator(group, P);
-  P = NULL;
-  ok = 1;
-
-err:
-  if (!ok) {
-    EC_GROUP_free(group);
-    group = NULL;
-  }
-  EC_POINT_free(P);
-  BN_CTX_free(ctx);
-  BN_free(p);
-  BN_free(a);
-  BN_free(b);
-  BN_free(x);
-  BN_free(y);
-  return group;
-}
-
-// Built-in groups are allocated lazily and static once allocated.
-// TODO(davidben): Make these actually static. https://crbug.com/boringssl/20.
-struct built_in_groups_st {
-  EC_GROUP *groups[OPENSSL_NUM_BUILT_IN_CURVES];
-};
-DEFINE_BSS_GET(struct built_in_groups_st, built_in_groups)
-DEFINE_STATIC_MUTEX(built_in_groups_lock)
-
-EC_GROUP *EC_GROUP_new_by_curve_name(int nid) {
-  struct built_in_groups_st *groups = built_in_groups_bss_get();
-  EC_GROUP **group_ptr = NULL;
-  const struct built_in_curves *const curves = OPENSSL_built_in_curves();
-  const struct built_in_curve *curve = NULL;
-  for (size_t i = 0; i < OPENSSL_NUM_BUILT_IN_CURVES; i++) {
-    if (curves->curves[i].nid == nid) {
-      curve = &curves->curves[i];
-      group_ptr = &groups->groups[i];
-      break;
-    }
-  }
-
-  if (curve == NULL) {
-    OPENSSL_PUT_ERROR(EC, EC_R_UNKNOWN_GROUP);
-    return NULL;
-  }
-
-  CRYPTO_STATIC_MUTEX_lock_read(built_in_groups_lock_bss_get());
-  EC_GROUP *ret = *group_ptr;
-  CRYPTO_STATIC_MUTEX_unlock_read(built_in_groups_lock_bss_get());
-  if (ret != NULL) {
-    return ret;
-  }
-
-  ret = ec_group_new_from_data(curve);
-  if (ret == NULL) {
-    return NULL;
-  }
-
-  EC_GROUP *to_free = NULL;
-  CRYPTO_STATIC_MUTEX_lock_write(built_in_groups_lock_bss_get());
-  if (*group_ptr == NULL) {
-    *group_ptr = ret;
-    // Filling in |ret->curve_name| makes |EC_GROUP_free| and |EC_GROUP_dup|
-    // into no-ops. At this point, |ret| is considered static.
-    ret->curve_name = nid;
-  } else {
-    to_free = ret;
-    ret = *group_ptr;
-  }
-  CRYPTO_STATIC_MUTEX_unlock_write(built_in_groups_lock_bss_get());
-
-  EC_GROUP_free(to_free);
-  return ret;
-}
-
-void EC_GROUP_free(EC_GROUP *group) {
-  if (group == NULL ||
-      // Built-in curves are static.
-      group->curve_name != NID_undef ||
-      !CRYPTO_refcount_dec_and_test_zero(&group->references)) {
-    return;
-  }
-
-  if (group->meth->group_finish != NULL) {
-    group->meth->group_finish(group);
-  }
-
-  ec_point_free(group->generator, 0 /* don't free group */);
-  BN_free(&group->order);
-  BN_MONT_CTX_free(group->order_mont);
-
-  OPENSSL_free(group);
-}
-
-EC_GROUP *EC_GROUP_dup(const EC_GROUP *a) {
-  if (a == NULL ||
-      // Built-in curves are static.
-      a->curve_name != NID_undef) {
-    return (EC_GROUP *)a;
-  }
-
-  // Groups are logically immutable (but for |EC_GROUP_set_generator| which must
-  // be called early on), so we simply take a reference.
-  EC_GROUP *group = (EC_GROUP *)a;
-  CRYPTO_refcount_inc(&group->references);
-  return group;
-}
-
-int EC_GROUP_cmp(const EC_GROUP *a, const EC_GROUP *b, BN_CTX *ignored) {
-  // Note this function returns 0 if equal and non-zero otherwise.
-  if (a == b) {
-    return 0;
-  }
-  if (a->curve_name != b->curve_name) {
-    return 1;
-  }
-  if (a->curve_name != NID_undef) {
-    // Built-in curves may be compared by curve name alone.
-    return 0;
-  }
-
-  // |a| and |b| are both custom curves. We compare the entire curve
-  // structure. If |a| or |b| is incomplete (due to legacy OpenSSL mistakes,
-  // custom curve construction is sadly done in two parts) but otherwise not the
-  // same object, we consider them always unequal.
-  return a->meth != b->meth ||
-         a->generator == NULL ||
-         b->generator == NULL ||
-         BN_cmp(&a->order, &b->order) != 0 ||
-         BN_cmp(&a->field, &b->field) != 0 ||
-         !ec_felem_equal(a, &a->a, &b->a) ||
-         !ec_felem_equal(a, &a->b, &b->b) ||
-         ec_GFp_simple_cmp(a, &a->generator->raw, &b->generator->raw) != 0;
-}
-
-const EC_POINT *EC_GROUP_get0_generator(const EC_GROUP *group) {
-  return group->generator;
-}
-
-const BIGNUM *EC_GROUP_get0_order(const EC_GROUP *group) {
-  assert(!BN_is_zero(&group->order));
-  return &group->order;
-}
-
-int EC_GROUP_get_order(const EC_GROUP *group, BIGNUM *order, BN_CTX *ctx) {
-  if (BN_copy(order, EC_GROUP_get0_order(group)) == NULL) {
-    return 0;
-  }
-  return 1;
-}
-
-int EC_GROUP_order_bits(const EC_GROUP *group) {
-  return BN_num_bits(&group->order);
-}
-
-int EC_GROUP_get_cofactor(const EC_GROUP *group, BIGNUM *cofactor,
-                          BN_CTX *ctx) {
-  // All |EC_GROUP|s have cofactor 1.
-  return BN_set_word(cofactor, 1);
-}
-
-int EC_GROUP_get_curve_GFp(const EC_GROUP *group, BIGNUM *out_p, BIGNUM *out_a,
-                           BIGNUM *out_b, BN_CTX *ctx) {
-  return ec_GFp_simple_group_get_curve(group, out_p, out_a, out_b);
-}
-
-int EC_GROUP_get_curve_name(const EC_GROUP *group) { return group->curve_name; }
-
-unsigned EC_GROUP_get_degree(const EC_GROUP *group) {
-  return BN_num_bits(&group->field);
-}
-
-const char *EC_curve_nid2nist(int nid) {
-  switch (nid) {
-    case NID_secp224r1:
-      return "P-224";
-    case NID_X9_62_prime256v1:
-      return "P-256";
-    case NID_secp384r1:
-      return "P-384";
-    case NID_secp521r1:
-      return "P-521";
-  }
-  return NULL;
-}
-
-int EC_curve_nist2nid(const char *name) {
-  if (strcmp(name, "P-224") == 0) {
-    return NID_secp224r1;
-  }
-  if (strcmp(name, "P-256") == 0) {
-    return NID_X9_62_prime256v1;
-  }
-  if (strcmp(name, "P-384") == 0) {
-    return NID_secp384r1;
-  }
-  if (strcmp(name, "P-521") == 0) {
-    return NID_secp521r1;
-  }
-  return NID_undef;
-}
-
-EC_POINT *EC_POINT_new(const EC_GROUP *group) {
-  if (group == NULL) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_PASSED_NULL_PARAMETER);
-    return NULL;
-  }
-
-  EC_POINT *ret = OPENSSL_malloc(sizeof *ret);
-  if (ret == NULL) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_MALLOC_FAILURE);
-    return NULL;
-  }
-
-  ret->group = EC_GROUP_dup(group);
-  ec_GFp_simple_point_init(&ret->raw);
-  return ret;
-}
-
-static void ec_point_free(EC_POINT *point, int free_group) {
-  if (!point) {
-    return;
-  }
-  if (free_group) {
-    EC_GROUP_free(point->group);
-  }
-  OPENSSL_free(point);
-}
-
-void EC_POINT_free(EC_POINT *point) {
-  ec_point_free(point, 1 /* free group */);
-}
-
-void EC_POINT_clear_free(EC_POINT *point) { EC_POINT_free(point); }
-
-int EC_POINT_copy(EC_POINT *dest, const EC_POINT *src) {
-  if (EC_GROUP_cmp(dest->group, src->group, NULL) != 0) {
-    OPENSSL_PUT_ERROR(EC, EC_R_INCOMPATIBLE_OBJECTS);
-    return 0;
-  }
-  if (dest == src) {
-    return 1;
-  }
-  ec_GFp_simple_point_copy(&dest->raw, &src->raw);
-  return 1;
-}
-
-EC_POINT *EC_POINT_dup(const EC_POINT *a, const EC_GROUP *group) {
-  if (a == NULL) {
-    return NULL;
-  }
-
-  EC_POINT *ret = EC_POINT_new(group);
-  if (ret == NULL ||
-      !EC_POINT_copy(ret, a)) {
-    EC_POINT_free(ret);
-    return NULL;
-  }
-
-  return ret;
-}
-
-int EC_POINT_set_to_infinity(const EC_GROUP *group, EC_POINT *point) {
-  if (EC_GROUP_cmp(group, point->group, NULL) != 0) {
-    OPENSSL_PUT_ERROR(EC, EC_R_INCOMPATIBLE_OBJECTS);
-    return 0;
-  }
-  ec_GFp_simple_point_set_to_infinity(group, &point->raw);
-  return 1;
-}
-
-int EC_POINT_is_at_infinity(const EC_GROUP *group, const EC_POINT *point) {
-  if (EC_GROUP_cmp(group, point->group, NULL) != 0) {
-    OPENSSL_PUT_ERROR(EC, EC_R_INCOMPATIBLE_OBJECTS);
-    return 0;
-  }
-  return ec_GFp_simple_is_at_infinity(group, &point->raw);
-}
-
-int EC_POINT_is_on_curve(const EC_GROUP *group, const EC_POINT *point,
-                         BN_CTX *ctx) {
-  if (EC_GROUP_cmp(group, point->group, NULL) != 0) {
-    OPENSSL_PUT_ERROR(EC, EC_R_INCOMPATIBLE_OBJECTS);
-    return 0;
-  }
-  return ec_GFp_simple_is_on_curve(group, &point->raw);
-}
-
-int EC_POINT_cmp(const EC_GROUP *group, const EC_POINT *a, const EC_POINT *b,
-                 BN_CTX *ctx) {
-  if (EC_GROUP_cmp(group, a->group, NULL) != 0 ||
-      EC_GROUP_cmp(group, b->group, NULL) != 0) {
-    OPENSSL_PUT_ERROR(EC, EC_R_INCOMPATIBLE_OBJECTS);
-    return -1;
-  }
-  return ec_GFp_simple_cmp(group, &a->raw, &b->raw);
-}
-
-int EC_POINT_get_affine_coordinates_GFp(const EC_GROUP *group,
-                                        const EC_POINT *point, BIGNUM *x,
-                                        BIGNUM *y, BN_CTX *ctx) {
-  if (group->meth->point_get_affine_coordinates == 0) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-    return 0;
-  }
-  if (EC_GROUP_cmp(group, point->group, NULL) != 0) {
-    OPENSSL_PUT_ERROR(EC, EC_R_INCOMPATIBLE_OBJECTS);
-    return 0;
-  }
-  EC_FELEM x_felem, y_felem;
-  if (!group->meth->point_get_affine_coordinates(group, &point->raw,
-                                                 x == NULL ? NULL : &x_felem,
-                                                 y == NULL ? NULL : &y_felem) ||
-      (x != NULL && !bn_set_words(x, x_felem.words, group->field.width)) ||
-      (y != NULL && !bn_set_words(y, y_felem.words, group->field.width))) {
-    return 0;
-  }
-  return 1;
-}
-
-int EC_POINT_set_affine_coordinates_GFp(const EC_GROUP *group, EC_POINT *point,
-                                        const BIGNUM *x, const BIGNUM *y,
-                                        BN_CTX *ctx) {
-  if (EC_GROUP_cmp(group, point->group, NULL) != 0) {
-    OPENSSL_PUT_ERROR(EC, EC_R_INCOMPATIBLE_OBJECTS);
-    return 0;
-  }
-  if (!ec_GFp_simple_point_set_affine_coordinates(group, &point->raw, x, y)) {
-    return 0;
-  }
-
-  if (!EC_POINT_is_on_curve(group, point, ctx)) {
-    // In the event of an error, defend against the caller not checking the
-    // return value by setting a known safe value: the base point.
-    const EC_POINT *generator = EC_GROUP_get0_generator(group);
-    // The generator can be missing if the caller is in the process of
-    // constructing an arbitrary group. In this, we give up and hope they're
-    // checking the return value.
-    if (generator) {
-      ec_GFp_simple_point_copy(&point->raw, &generator->raw);
-    }
-    OPENSSL_PUT_ERROR(EC, EC_R_POINT_IS_NOT_ON_CURVE);
-    return 0;
-  }
-
-  return 1;
-}
-
-int EC_POINT_add(const EC_GROUP *group, EC_POINT *r, const EC_POINT *a,
-                 const EC_POINT *b, BN_CTX *ctx) {
-  if (EC_GROUP_cmp(group, r->group, NULL) != 0 ||
-      EC_GROUP_cmp(group, a->group, NULL) != 0 ||
-      EC_GROUP_cmp(group, b->group, NULL) != 0) {
-    OPENSSL_PUT_ERROR(EC, EC_R_INCOMPATIBLE_OBJECTS);
-    return 0;
-  }
-  group->meth->add(group, &r->raw, &a->raw, &b->raw);
-  return 1;
-}
-
-int EC_POINT_dbl(const EC_GROUP *group, EC_POINT *r, const EC_POINT *a,
-                 BN_CTX *ctx) {
-  if (EC_GROUP_cmp(group, r->group, NULL) != 0 ||
-      EC_GROUP_cmp(group, a->group, NULL) != 0) {
-    OPENSSL_PUT_ERROR(EC, EC_R_INCOMPATIBLE_OBJECTS);
-    return 0;
-  }
-  group->meth->dbl(group, &r->raw, &a->raw);
-  return 1;
-}
-
-
-int EC_POINT_invert(const EC_GROUP *group, EC_POINT *a, BN_CTX *ctx) {
-  if (EC_GROUP_cmp(group, a->group, NULL) != 0) {
-    OPENSSL_PUT_ERROR(EC, EC_R_INCOMPATIBLE_OBJECTS);
-    return 0;
-  }
-  ec_GFp_simple_invert(group, &a->raw);
-  return 1;
-}
-
-static int arbitrary_bignum_to_scalar(const EC_GROUP *group, EC_SCALAR *out,
-                                      const BIGNUM *in, BN_CTX *ctx) {
-  if (ec_bignum_to_scalar(group, out, in)) {
-    return 1;
-  }
-
-  ERR_clear_error();
-
-  // This is an unusual input, so we do not guarantee constant-time processing.
-  const BIGNUM *order = &group->order;
-  BN_CTX_start(ctx);
-  BIGNUM *tmp = BN_CTX_get(ctx);
-  int ok = tmp != NULL &&
-           BN_nnmod(tmp, in, order, ctx) &&
-           ec_bignum_to_scalar(group, out, tmp);
-  BN_CTX_end(ctx);
-  return ok;
-}
-
-int EC_POINT_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *g_scalar,
-                 const EC_POINT *p, const BIGNUM *p_scalar, BN_CTX *ctx) {
-  // Previously, this function set |r| to the point at infinity if there was
-  // nothing to multiply. But, nobody should be calling this function with
-  // nothing to multiply in the first place.
-  if ((g_scalar == NULL && p_scalar == NULL) ||
-      (p == NULL) != (p_scalar == NULL))  {
-    OPENSSL_PUT_ERROR(EC, ERR_R_PASSED_NULL_PARAMETER);
-    return 0;
-  }
-
-  if (EC_GROUP_cmp(group, r->group, NULL) != 0 ||
-      (p != NULL && EC_GROUP_cmp(group, p->group, NULL) != 0)) {
-    OPENSSL_PUT_ERROR(EC, EC_R_INCOMPATIBLE_OBJECTS);
-    return 0;
-  }
-
-  int ret = 0;
-  BN_CTX *new_ctx = NULL;
-  if (ctx == NULL) {
-    new_ctx = BN_CTX_new();
-    if (new_ctx == NULL) {
-      goto err;
-    }
-    ctx = new_ctx;
-  }
-
-  // If both |g_scalar| and |p_scalar| are non-NULL,
-  // |ec_point_mul_scalar_public| would share the doublings between the two
-  // products, which would be more efficient. However, we conservatively assume
-  // the caller needs a constant-time operation. (ECDSA verification does not
-  // use this function.)
-  //
-  // Previously, the low-level constant-time multiplication function aligned
-  // with this function's calling convention, but this was misleading. Curves
-  // which combined the two multiplications did not avoid the doubling case
-  // in the incomplete addition formula and were not constant-time.
-
-  if (g_scalar != NULL) {
-    EC_SCALAR scalar;
-    if (!arbitrary_bignum_to_scalar(group, &scalar, g_scalar, ctx) ||
-        !ec_point_mul_scalar_base(group, &r->raw, &scalar)) {
-      goto err;
-    }
-  }
-
-  if (p_scalar != NULL) {
-    EC_SCALAR scalar;
-    EC_RAW_POINT tmp;
-    if (!arbitrary_bignum_to_scalar(group, &scalar, p_scalar, ctx) ||
-        !ec_point_mul_scalar(group, &tmp, &p->raw, &scalar)) {
-      goto err;
-    }
-    if (g_scalar == NULL) {
-      OPENSSL_memcpy(&r->raw, &tmp, sizeof(EC_RAW_POINT));
-    } else {
-      group->meth->add(group, &r->raw, &r->raw, &tmp);
-    }
-  }
-
-  ret = 1;
-
-err:
-  BN_CTX_free(new_ctx);
-  return ret;
-}
-
-int ec_point_mul_scalar_public(const EC_GROUP *group, EC_RAW_POINT *r,
-                               const EC_SCALAR *g_scalar, const EC_RAW_POINT *p,
-                               const EC_SCALAR *p_scalar) {
-  if (g_scalar == NULL || p_scalar == NULL || p == NULL) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_PASSED_NULL_PARAMETER);
-    return 0;
-  }
-
-  group->meth->mul_public(group, r, g_scalar, p, p_scalar);
-  return 1;
-}
-
-int ec_point_mul_scalar(const EC_GROUP *group, EC_RAW_POINT *r,
-                        const EC_RAW_POINT *p, const EC_SCALAR *scalar) {
-  if (p == NULL || scalar == NULL) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_PASSED_NULL_PARAMETER);
-    return 0;
-  }
-
-  group->meth->mul(group, r, p, scalar);
-  return 1;
-}
-
-int ec_point_mul_scalar_base(const EC_GROUP *group, EC_RAW_POINT *r,
-                             const EC_SCALAR *scalar) {
-  if (scalar == NULL) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_PASSED_NULL_PARAMETER);
-    return 0;
-  }
-
-  group->meth->mul_base(group, r, scalar);
-  return 1;
-}
-
-int ec_cmp_x_coordinate(const EC_GROUP *group, const EC_RAW_POINT *p,
-                        const EC_SCALAR *r) {
-  return group->meth->cmp_x_coordinate(group, p, r);
-}
-
-int ec_get_x_coordinate_as_scalar(const EC_GROUP *group, EC_SCALAR *out,
-                                  const EC_RAW_POINT *p) {
-  EC_FELEM x;
-  // For simplicity, in case of width mismatches between |group->field| and
-  // |group->order|, zero any untouched words in |x|.
-  OPENSSL_memset(&x, 0, sizeof(x));
-  if (!group->meth->point_get_affine_coordinates(group, p, &x, NULL)) {
-    return 0;
-  }
-
-  // We must have p < 2×order, assuming p is not tiny (p >= 17). Thus rather we
-  // can reduce by performing at most one subtraction.
-  //
-  // Proof: We only work with prime order curves, so the number of points on
-  // the curve is the order. Thus Hasse's theorem gives:
-  //
-  //     |order - (p + 1)| <= 2×sqrt(p)
-  //         p + 1 - order <= 2×sqrt(p)
-  //     p + 1 - 2×sqrt(p) <= order
-  //       p + 1 - 2×(p/4)  < order       (p/4 > sqrt(p) for p >= 17)
-  //         p/2 < p/2 + 1  < order
-  //                     p  < 2×order
-  //
-  // Additionally, one can manually check this property for built-in curves. It
-  // is enforced for legacy custom curves in |EC_GROUP_set_generator|.
-
-  // The above does not guarantee |group->field| is not one word larger than
-  // |group->order|, so read one extra carry word.
-  BN_ULONG carry =
-      group->order.width < EC_MAX_WORDS ? x.words[group->order.width] : 0;
-  bn_reduce_once(out->words, x.words, carry, group->order.d,
-                 group->order.width);
-  return 1;
-}
-
-int ec_point_get_affine_coordinate_bytes(const EC_GROUP *group, uint8_t *out_x,
-                                         uint8_t *out_y, size_t *out_len,
-                                         size_t max_out,
-                                         const EC_RAW_POINT *p) {
-  size_t len = BN_num_bytes(&group->field);
-  assert(len <= EC_MAX_BYTES);
-  if (max_out < len) {
-    OPENSSL_PUT_ERROR(EC, EC_R_BUFFER_TOO_SMALL);
-    return 0;
-  }
-
-  EC_FELEM x, y;
-  if (!group->meth->point_get_affine_coordinates(
-          group, p, out_x == NULL ? NULL : &x, out_y == NULL ? NULL : &y)) {
-    return 0;
-  }
-
-  if (out_x != NULL) {
-    for (size_t i = 0; i < len; i++) {
-      out_x[i] = x.bytes[len - i - 1];
-    }
-  }
-  if (out_y != NULL) {
-    for (size_t i = 0; i < len; i++) {
-      out_y[i] = y.bytes[len - i - 1];
-    }
-  }
-  *out_len = len;
-  return 1;
-}
-
-void EC_GROUP_set_asn1_flag(EC_GROUP *group, int flag) {}
-
-const EC_METHOD *EC_GROUP_method_of(const EC_GROUP *group) {
-  // This function exists purely to give callers a way to call
-  // |EC_METHOD_get_field_type|. cryptography.io crashes if |EC_GROUP_method_of|
-  // returns NULL, so return some other garbage pointer.
-  return (const EC_METHOD *)0x12340000;
-}
-
-int EC_METHOD_get_field_type(const EC_METHOD *meth) {
-  return NID_X9_62_prime_field;
-}
-
-void EC_GROUP_set_point_conversion_form(EC_GROUP *group,
-                                        point_conversion_form_t form) {
-  if (form != POINT_CONVERSION_UNCOMPRESSED) {
-    abort();
-  }
-}
-
-size_t EC_get_builtin_curves(EC_builtin_curve *out_curves,
-                             size_t max_num_curves) {
-  const struct built_in_curves *const curves = OPENSSL_built_in_curves();
-
-  for (size_t i = 0; i < max_num_curves && i < OPENSSL_NUM_BUILT_IN_CURVES;
-       i++) {
-    out_curves[i].comment = curves->curves[i].comment;
-    out_curves[i].nid = curves->curves[i].nid;
-  }
-
-  return OPENSSL_NUM_BUILT_IN_CURVES;
-}