RubyGems - exiftool_vendored - Versions diffs - 9.78.0 → 9.99.0 - Mend

exiftool_vendored 9.78.0 → 9.99.0

Potentially problematic release.

This version of exiftool_vendored might be problematic. Click here for more details.

Files changed (1409) hide show

data/bin/Image-ExifTool-9.99/html/filename.html ADDED Viewed

@@ -0,0 +1,352 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
+        "http://www.w3.org/TR/1999/REC-html401-19991224/loose.dtd">
+<html>
+<head>
+  <title>FileName and Directory tags</title>
+<link rel=stylesheet type='text/css' href='style.css' title='Style'>
+<style type="text/css">
+<!--
+.prog    { padding: 0.5em; border: 1px solid gray; background: #fee }
+-->
+</style>
+</head>
+<body>
+<h2 class='up'>Writing "FileName" and "Directory" tags</h2>
+<p>By writing the <b>FileName</b> and/or <b>Directory</b> tags, ExifTool can be
+used to rename and/or move images into directories according to any information
+contained in the image.  This is a powerful feature when combined with the
+<code>-tagsFromFile</code> ability to copy the values from other tags.  The most
+common use of this feature is to organize images by date/time, but any other tag
+value may also be used.</p>
+<p>Writing the <b>Directory</b> tag moves a file to a specified directory.  The
+directory is created if it doesn't already exist.</p>
+<p>Writing the <b>FileName</b> tag renames a file.  If the new <b>FileName</b>
+has a directory specification (ie. contains a '<code>/</code>' character), then
+the file is also moved to the specified directory (see
+<a href="#ex6">example 6</a> below).  Existing files will not be overwritten
+(but see "Warning" below).</p>
+<p>The write-only <b>TestName</b> tag provides a mechanism for dry-run testing
+of the rename feature.  Writing <b>TestName</b> displays the old and new names
+without making any changes to the files.  (Note that there is no corresponding
+test tag for <b>Directory</b>, but <b>TestName</b> supports a full path name
+just like <b>FileName</b>, so the directory may be tested as well.)</p>
+<p>The <code>%d</code>, <code>%f</code>, <code>%e</code> file name format codes
+may be used to represent the directory, name and extension of the original file
+when specifying <b>FileName</b> and <b>Directory</b> tags via the command-line
+interface. (In a similar way to the <code>-o</code>, <code>-w</code> and
+<code>-tagsFromFile</code> options.) Also, <code>%c</code> may be used to add a
+copy number to the output file name to avoid collisions with existing file
+names. Note that these codes must be escaped with an extra <code>%</code> if
+used within a date format string.  Modifiers may also be used to change the
+default behaviour of these format codes.  See the <code>-w</code> option in the
+<a href="exiftool_pod.html">application documentation</a> for details.</p>
+<p>When organizing files by date/time, use of the <code>-d</code> (date format)
+option is essential to specify a format for the filename (and/or directory
+name).  The examples below demonstrate the use of this feature.  Also, a list of
+of <a href="#codes">common date format codes</a> is provided for reference.</p>
+<blockquote class=prog><b class=red>Advanced feature:</b> The write-only
+<b>HardLink</b> tag may be written using a technique similar to <b>FileName</b>.
+Instead of renaming or moving the file, writing <b>HardLink</b> creates a hard
+link with the specified name.  This feature allows files to be organized without
+affecting the originals.  See the <a href="TagNames/extra.html">Extra Tags
+documentation</a> for more information.</blockquote>
+<h3>Notes:</h3>
+<p>Writing the <b>FileName</b> and/or <b>Directory</b> tags alone causes the
+file to be renamed or moved, not copied.  However, if any "real" tags are
+written at the same time, then the file is rewritten to the new destination and
+the original file is left unchanged.  (Only the four writable "pseudo" tags,
+<b>FileName</b>, <b>Directory</b>, <b>FileModifyDate</b> and
+<b>FileCreateDate</b>, may be set without causing the file to be rewritten.)  If
+desired, the <code>-overwrite_original</code> option may be used to remove the
+original copy when the file is rewritten.</p>
+<p>Conversely, the <code>-o</code> option may be used to force exiftool to
+always create a copy of the file, even if no meta-information tags are written.
+This is true even if the <code>-o</code> option is superseded by writing the
+<b>Directory</b> tag, or through a <b>FileName</b> which includes a directory
+specification.  (See <a href="#ex5">example 5</a> below.  Also see
+<a href="#ex11">example 11</a> for the directory precedence rules.)</p>
+<p>If the <code>-d</code> option is used, the unformatted date/time value must
+be valid (ie. in the form "<code>YYYY:mm:dd HH:MM:SS</code>"), otherwise the
+date formatting will fail and the file will not be renamed or moved.</p>
+<p>In a Windows batch file, all <code>%</code> characters must be escaped as
+<code>%%</code>.  This can result in extreme format codes like
+<code>%%%%f</code> when using the <code>-d</code> option.</p>
+<blockquote class=prog><b class=red>Warning:</b>
+Writing <b>illegal file names</b> in Windows can have unpredictable results and
+may result in <b>data loss</b>.  Illegal characters in Windows file names are:
+<pre class=code>    / \ ? * : | " &lt; &gt;</pre>
+Any tag used in generating a file name which may contain these characters must
+first be filtered to remove or translate these characters.  A special feature
+allows these characters to be removed from a tag value by adding a semicolon
+inside the braces after a tag name.  For example:
+<pre class=code>    exiftool "-filename&lt;${model;}.%e" c:\images</pre>
+This advanced formatting feature may also be used to do arbitrary reformatting
+of any tag value used in a format string.  See the <code>-p</code> option in the
+<a href="exiftool_pod.html">application documentation</a> for more details.
+</blockquote>
+<h2>Examples</h2>
+<a name="ex0"></a><table cellpadding=6>
+<tr><td valign='top'>&nbsp;0.</td><td bgcolor='#dddddd'><code class='blk'>
+exiftool -d %Y%m%d_%H%M%%-c.%%e "-testname&lt;CreateDate" DIR
+</code></td></tr></table>
+<blockquote>
+The <b>TestName</b> tag is used for dry-run testing of the file renaming
+feature.  The above command is identical to that of the next example except that
+<b>TestName</b> is written instead of <b>FileName</b>.  So instead of renaming
+the files, this command prints the old and new file names without actually
+changing anything.  For example:
+<blockquote><pre>&gt; <span class=code>exiftool -d %Y%m%d_%H%M%%-c.%%e "-testname&lt;CreateDate" tmp</span>
+'tmp/a.jpg' --&gt; 'tmp/20031031_1544.jpg'
+'tmp/b.jpg' --&gt; 'tmp/20010519_1836.jpg'
+    1 directories scanned
+    0 image files updated
+    2 image files unchanged</pre></blockquote>
+</blockquote>
+<a name="ex1"></a><table cellpadding=6>
+<tr><td valign='top'>&nbsp;1.</td><td bgcolor='#dddddd'><code class='blk'>
+exiftool -d %Y%m%d_%H%M%%-c.%%e "-filename&lt;CreateDate" DIR
+</code></td></tr></table>
+<blockquote>
+Rename all images in directory '<code>DIR</code>' to names like
+'<code>20060327_1058-2.jpg</code>', with individual file names derived from the
+value of the CreateDate (plus a copy number with a leading '<code>-</code>' if a
+file with the same name already exists), and with the same extension as the
+original image.  <i class=lt>[Note that copying tag values with '<code>&lt;</code>' implies
+'<code>-tagsfromfile @</code>' unless otherwise specified.  See the
+<code>-tagsFromFile</code> description in the
+<a href="exiftool_pod.html">application documentation</a> for details.]</i>
+<p><b>FAQ:</b> <i>"Why doesn't this command rename my files?"</i></p>
+<p>There are 2 common reasons for this:</p>
+<p>a) When a directory name is specified, this command will only rename "writable"
+files in the directory.  Use '<code>exiftool -listwf</code>' to list the
+extensions of currently writable file types.  The <code>-ext</code> option may
+be used to rename other file types (eg. '<code>-ext avi</code>').</p>
+<p>b) For this command to work, the CreateDate tag must exist in the source
+file. Use '<code>exiftool -createdate FILE</code>' to see if a file contains
+this information.  If it doesn't, you may need to use another date/time tag such
+as DateTimeOriginal or FileModifyDate.  To see all available date/time tags in a
+file (and their locations), use '<code>exiftool -a -G1 -s -time:all FILE</code>'.</p>
+</blockquote>
+<a name="ex2"></a><table cellpadding=6>
+<tr><td valign='top'>&nbsp;2.</td><td bgcolor='#dddddd'><code class='blk'>
+exiftool -d %Y-%m-%d "-directory&lt;datetimeoriginal" image.jpg
+</code></td></tr></table>
+<blockquote>
+Move '<code>image.jpg</code>' into a directory with a name given by
+DateTimeOriginal, in the form '<code>2006-03-27</code>'.
+</blockquote>
+<a name="ex3"></a><table cellpadding=6>
+<tr><td valign='top'>&nbsp;3.</td><td bgcolor='#dddddd'><code class='blk'>
+exiftool '-filename&lt;%f_$imagesize.%e' dir
+</code></td></tr></table>
+<blockquote>
+This example uses an expression to add the image size to the name of all images
+in directory '<code>dir</code>'. For example, this would remame a 640x480 image
+called '<code>image.jpg</code>' to '<code>image_640x480.jpg</code>'. (Note that
+the single quotes are necessary in Unix shells due to the '<code>$</code>'
+symbol, but double quotes must be used instead when running in a Windows cmd shell.)
+</blockquote>
+<a name="ex4"></a><table cellpadding=6>
+<tr><td valign='top'>&nbsp;4.</td><td bgcolor='#dddddd'><code class='blk'>
+exiftool -r -directory=%e_images/%d pics
+</code></td></tr></table>
+<blockquote>
+Recursively move all images based in directory '<code>pics</code>' to
+separate directory trees organized by file extension.  For instance, in this
+example the file '<code>pics/toys/new_car.jpg</code>' is moved to
+'<code>jpg_images/pics/toys/new_car.jpg</code>'.
+</blockquote>
+<a name="ex5"></a><table cellpadding=6>
+<tr><td valign='top'>&nbsp;5.</td><td bgcolor='#dddddd'><code class='blk'>
+exiftool -r -o %e_images/%d pics<br>
+exiftool -r -o dummy/ -directory=%e_images/%d pics
+</code></td></tr></table>
+<blockquote>
+Both of these commands have the same effect as example 3 above except that
+images are copied instead of moved since the <code>-o</code> option was used. In
+the second command the trailing '<code>/</code>' on '<code>dummy/</code>' is
+necessary because otherwise '<code>dummy</code>' would be interpreted as a file
+name.  This technique of using <code>-o</code> with a dummy directory name is
+necessary when the directory name is derived from the value of other tags (eg.
+'<code>-directory&lt;createDate</code>') and you want the files to be copied
+instead of moved.  (Because the values of other tags may not be used with the
+<code>-o</code> option.)
+</blockquote>
+<a name="ex6"></a><table cellpadding=6>
+<tr><td valign='top'>&nbsp;6.</td><td bgcolor='#dddddd'><code class='blk'>
+exiftool -r -d %Y/%m/%d/image_%H%M%S.%%e "-filename&lt;filemodifydate" DIR
+</code></td></tr></table>
+<blockquote>
+Recusively rename all images in '<code>DIR</code>' and any contained
+subdirectories to the form '<code>image_HHMMSS.EXT</code>' (where
+'<code>ext</code>' is the original file extension), and move them into a new
+directory hierarchy based on date of file modification, with path names like
+'<code>2006/03/27/image_105859.jpg</code>'.
+</blockquote>
+<p>The following examples demonstrate the interaction of this feature with
+other ExifTool options:</p>
+<a name="ex7"></a><table cellpadding=6>
+<tr><td valign='top'>&nbsp;7.</td><td bgcolor='#dddddd'><code class='blk'>
+exiftool -filename=new.jpg dir/image.jpg
+</code></td></tr></table>
+<blockquote>
+Rename '<code>dir/image.jpg</code>' to '<code>dir/new.jpg</code>'.
+</blockquote>
+<a name="ex8"></a><table cellpadding=6>
+<tr><td valign='top'>&nbsp;8.</td><td bgcolor='#dddddd'><code class='blk'>
+exiftool -filename=new.jpg -comment=xxx dir/image.jpg
+</code></td></tr></table>
+<blockquote>
+Copy '<code>dir/image.jpg</code>', add a new comment, and write output to
+'<code>dir/new.jpg</code>'. The original file '<code>dir/image.jpg</code>' is
+not changed.
+</blockquote>
+<a name="ex9"></a><table cellpadding=6>
+<tr><td valign='top'>&nbsp;9.</td><td bgcolor='#dddddd'><code class='blk'>
+exiftool -filename=new.jpg -comment=xxx -overwrite_original dir/image.jpg
+</code></td></tr></table>
+<blockquote>
+Rewrite '<code>dir/image.jpg</code>', adding a new comment and writing output to
+'<code>dir/new.jpg</code>'. The original file '<code>dir/image.jpg</code>' is
+removed.
+</blockquote>
+<a name="ex10"></a><table cellpadding=6>
+<tr><td valign='top'>10.</td><td bgcolor='#dddddd'><code class='blk'>
+exiftool -o tmp/ -filename=new.jpg image.jpg<br>
+exiftool -o tmp/xxx.jpg -filename=new.jpg image.jpg<br>
+exiftool -o tmp/new.jpg image.jpg
+</code></td></tr></table>
+<blockquote>
+A file name or directory specified via the <b>FileName</b> or <b>Directory</b>
+tag takes precedence over that specified by the <code>-o</code> option, so these
+three commands all have the same effect: '<code>tmp/new.jpg</code>' is created
+without changing '<code>image.jpg</code>'.  Note that in the first command, the
+trailing '<code>/</code>' on '<code>tmp/</code>' is necessary if the
+'<code>tmp</code>' directory doesn't already exist, otherwise '<code>tmp</code>'
+would be taken as a file name and '<code>new.jpg</code>' would be created in the
+current directory.  As illustrated in example 4 above, the file is rewritten
+instead of simply being renamed when the '<code>-o</code>' option is used.
+</blockquote>
+<a name="ex11"></a><table cellpadding=6>
+<tr><td valign='top'>11.</td><td bgcolor='#dddddd'><code class='blk'>
+exiftool -directory=dir1 -filename=dir2/out.jpg -o dir3/ dir4/image.jpg
+</code></td></tr></table>
+<blockquote>
+This example demonstrates the priorities of directory names specified using
+different techniques.  The output directory is taken from the first directory
+specified from the following list:  1) the <b>Directory</b> tag, 2) the
+directory part of the <b>FileName</b> tag, 3) the directory part of the
+<code>-o</code> option, or 4) the source directory, in that order.  The order of
+the arguments on the command line is not significant.  In this example, the
+target file is copied (not moved, because the <code>-o</code> option was used)
+to '<code>dir1/image.jpg</code>'. </blockquote>
+<blockquote>Note that both the <b>FileName</b> tag and the <code>-o</code>
+option may be used without a directory specification, in which case the
+directory with the next highest priority is used.  Also note that if
+<code>-o</code> specifies a directory, then the directory name must end with a
+'<code>/</code>' or the directory must already exist, otherwise ExifTool will
+interpret the last part as a file name. (eg. '<code>-o images/test</code>'
+specifies the '<code>images</code>' directory unless the
+'<code>images/test</code>' directory already exists, while '<code>-o
+images/test/</code>' unabiguously specifies the '<code>images/test</code>'
+directory.)
+</blockquote>
+<a name="ex12"></a><table cellpadding=6>
+<tr><td valign='top'>12.</td><td bgcolor='#dddddd'><code class='blk'>
+exiftool -d %Y/%m "-directory&lt;filemodifydate" "-directory&lt;createdate" "-directory&lt;datetimeoriginal" .
+</code></td></tr></table>
+<blockquote>Move image files from the current directory (<code>.</code>) into a
+directory hierarcy based on year/month.  In this command the Directory tag is
+set from multiple other date/time tags.  ExifTool evaluates the command-line
+arguments left to right, and latter assignments to the same tag override earlier
+ones, so the Directory for each image is ultimately set by the rightmost copy
+argument that is valid for that image.  Specifically, Directory is set from
+DateTimeOriginal if it exists, otherwise CreateDate if it exists, and finally
+FileModifyDate (which always exists) is used as a fallback.</blockquote>
+<a name="codes"></a><h2>Common Date Format Codes</h2>
+<p>Date format codes are used in the argument to the <code>-d</code> option to
+represent components of the date/time string.  The codes listed below are common
+to most systems, but additional codes may be available on your specific system
+-- see your <i>strftime</i> man page for details.</p>
+<blockquote><table>
+<tr><th>%a</th><td>- abbreviated locale weekday name</td></tr>
+<tr><th>%A</th><td>- full locale weekday name</td></tr>
+<tr><th>%b</th><td>- abbreviated locale month name</td></tr>
+<tr><th>%B</th><td>- full locale month name</td></tr>
+<tr><th>%c</th><td>- preferred locale date/time representation</td></tr>
+<tr><th>%d</th><td>- day of month (01-31)</td></tr>
+<tr><th>%H</th><td>- hour on a 24-hour clock (00-23)</td></tr>
+<tr><th>%I</th><td>- hour on a 12-hour clock (01-12)</td></tr>
+<tr><th>%j</th><td>- day of year (001-366)</td></tr>
+<tr><th>%m</th><td>- month number (01-12)</td></tr>
+<tr><th>%M</th><td>- minute (00-59)</td></tr>
+<tr><th>%p</th><td>- 'AM' or 'PM'</td></tr>
+<tr><th>%s</th><td>- number of seconds since the Epoch, UTC (see note 1 below)</td></tr>
+<tr><th>%S</th><td>- seconds (00-59)</td></tr>
+<tr><th>%w</th><td>- weekday number (0-6)</td></tr>
+<tr><th>%W</th><td>- week number of the year (00-53)</td></tr>
+<tr><th>%x</th><td>- preferred locale date representation</td></tr>
+<tr><th>%X</th><td>- preferred locale time representation</td></tr>
+<tr><th>%y</th><td>- 2-digit year (00-99)</td></tr>
+<tr><th>%Y</th><td>- 4-digit year (eg. 2006)</td></tr>
+<tr><th>%z</th><td>- time zone in the form +/-hhmm (see note 1 below)</td></tr>
+<tr><th>%Z</th><td>- system time zone name (see note 2 below)</td></tr>
+<tr><th>%%</th><td>- a literal '%' character</td></tr>
+</table></blockquote>
+<p>ExifTool file name format codes may be used inside a date format
+string when a date/time tag is used to set the value of the <b>FileName</b> or
+<b>Directory</b> tags via the command-line interface.  In this case, an extra
+'<code>%</code>' must be added to pass the format code through the date/time
+parser:</p>
+<blockquote><table>
+<tr><th>%%d</th><td>- original file directory (including trailing "/" if necessary)</td></tr>
+<tr><th>%%f</th><td>- original file name (without the extension)</td></tr>
+<tr><th>%%e</th><td>- original file extension (not including the ".")</td></tr>
+<tr><th>%%c</th><td>- copy number (output files only)</td></tr>
+</table></blockquote>
+<p>See the <code>-w</code> option in the <a href="exiftool_pod.html">exiftool
+application documentation</a> for details about special features available
+with these name format codes.</p>
+<p><b>Notes:</b></p>
+<ol>
+<li>The %s and %z format codes use the time zone specified by the date/time
+value.  If the date/time value does not include a time zone specification, then
+it is interpreted as a local time in the system time zone.  These format codes
+are parsed by ExifTool, so they should work on all systems.<br><br></li>
+<li>The %Z format code ignores any time zone specified in the date/time value,
+and returns the system time-zone name for the given date/time interpreted as a
+local system time.</li>
+</ol>
+<hr>
+<p class='lf'><a href="index.html">&lt;-- Back to ExifTool home page</a></p>
+</body>
+</html>

data/bin/Image-ExifTool-9.99/html/geotag.html ADDED Viewed

@@ -0,0 +1,654 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
+        "http://www.w3.org/TR/1999/REC-html401-19991224/loose.dtd">
+<html>
+<head>
+  <title>Geotagging with ExifTool</title>
+<link rel=stylesheet type='text/css' href='style.css' title='Style'>
+<style type="text/css">
+<!--
+pre  { color: #800; margin-left: 4em }
+.nr  { white-space: nowrap }
+-->
+</style>
+</head>
+<body>
+<div class='index'>
+<a href="#Implementation">Implementation</a>
+<br>&nbsp; - <a href="#geotag">Geotag</a>
+<br>&nbsp; - <a href="#geosync">Geosync</a>
+<br>&nbsp; - <a href="#geotime">Geotime</a>
+<br><a href="#Examples">Examples</a>
+<br><a href="#Options">Options</a>
+<br><a href="#Orient">Orientation</a>
+<br><a href="#Troubleshooting">Troubleshooting</a>
+<br><a href="#Tips">Tips</a>
+<hr>
+<a href="#Inverse">Inverse Geotagging</a>
+<br>&nbsp; - <a href="#GPX">Creating GPX log</a>
+<br>&nbsp; - <a href="#KML">Creating KML file</a>
+</div>
+<h1 class='up'>Geotagging with ExifTool</h1>
+<p>The ExifTool geotagging feature adds GPS tags to images based on data from a
+GPS track log file.  The GPS track log file is loaded, and linear interpolation
+is used to determine the GPS position at the time of the image, then the
+following tags are written to the image (if the corresponding information
+is available):</p>
+<pre>GPSLatitude      GPSLongitude      GPSAltitude          GPSDateStamp
+GPSLatitudeRef   GPSLongitudeRef   GPSAltitudeRef       GPSTimeStamp
+GPSTrack         GPSSpeed          GPSImgDirection      GPSPitch
+GPSTrackRef      GPSSpeedRef       GPSImgDirectionRef   GPSRoll
+</pre>
+<blockquote class=lt><i>Note: GPSPitch and GPSRoll are not standard tags, and
+must be <a href="#Orient">user-defined</a>.</i></blockquote>
+<p>Currently supported GPS track log file formats:</p>
+<ul>
+<li>GPX</li>
+<li>NMEA (RMC, GGA, GLL and GSA sentences)</li>
+<li>KML</li>
+<li>IGC (glider format)</li>
+<li>Garmin XML and TCX</li>
+<li>Magellan eXplorist PMGNTRK</li>
+<li>Honeywell PTNTHPR (see <a href="#Orient">Orientation</a>)</li>
+<li>Bramor gEO log</li>
+<li>Winplus Beacon .TXT</li>
+</ul>
+<a name="Implementation"></a>
+<h3>Implementation</h3>
+<p>Geotagging is accomplished in ExifTool through the use of three special
+<a href="TagNames/Extra.html">Extra tags</a>:
+<code>Geotag</code>, <code>Geosync</code> and <code>Geotime</code>.</p>
+<blockquote class=lt><i>Note: When writing these tags, order is important. If
+<code>Geotime</code> is written, it must be done after both <code>Geotag</code>
+and <code>Geosync</code>.</i></blockquote>
+<a name="geotag"></a>
+<h4>Geotag</h4>
+<p>The <code>Geotag</code> tag is used to define the GPS track log data. The
+geotagging feature is activated by assigning the name of a track log file to
+this tag.  As an example, the following command line adds GPS tags to all images
+in the "/Users/Phil/Pictures" directory based on GPS positions stored in the
+track log file "track.log" in the current directory:</p>
+<pre>exiftool -geotag=track.log /Users/Phil/Pictures
+</pre>
+<p>As a convienience the exiftool application also provides a
+<code>-geotag</code> option, so the following command is equivalent to the one
+above:</p>
+<pre>exiftool -geotag track.log /Users/Phil/Pictures
+</pre>
+<p>Multiple GPS log files may be loaded simultaneously by using more than one
+<code>-geotag</code> option or <code>-geotag=</code> assignment in the same
+command.  This allows batch processing of images spanning different tracks with
+a single command.  Wildcards may be used in the argument of the
+<code>-geotag</code> option, but note that the argument may then need to be
+quoted on some systems to prevent shell globbing, and that wildcards are not
+supported with the <code>-geotag=</code> syntax.  See the
+<a href="#Examples">examples</a> below.</p>
+<p>Deleting the <code>Geotag</code> tag (with <code>-geotag=</code>) causes the
+GPS tags written by the <code>-geotag</code> feature to be deleted.</p>
+<blockquote class=lt><i>Programmers:  You may write either a GPS log file name
+or the GPS log data as the value for <code>Geotag</code>.  If the value contains
+a newline or a null byte it is assumed to be data, otherwise it is taken as a
+file name.</i></blockquote>
+<a name="geosync"></a>
+<h4>Geosync</h4>
+<p>The <code>Geosync</code> tag is needed only when the image timestamps are not
+properly synchronized with GPS time, and must be set before <code>Geotime</code>
+to be effective.  The value written to the <code>Geosync</code> tag may take a
+number of different forms, but the basic format is that of a simple time
+difference which is added to <code>Geotime</code> before interpolating the GPS
+position in the track log.  This time difference may be of the form "SS",
+"MM:SS", "HH:MM:SS" or "DD HH:MM:SS" (where SS=seconds, MM=minutes, HH=hours and
+DD=days), and a leading "+" or "-" may be added for positive or negative
+differences (negative if the camera clock was ahead of GPS time).  Fractional
+seconds are allowed (eg. "SS.ss").</p>
+<p>For example, "<code>-geosync=-1:20</code>" specifies that synchronization
+with GPS time is achieved by subtracting 1 minute and 20 seconds from the
+<code>Geotime</code> value.  See the <a href="#TP1">Time Synchronization Tip</a>
+below for more details.</p>
+<blockquote class=lt><i>Note that a single decimal value is interpreted as
+seconds when written to <code>Geosync</code>.  This is different from of other
+date/time shift values where a single value is normally taken as hours.</i>
+</blockquote>
+<p>The <code>Geosync</code> value may also be specified using 3 different
+formats which provide a GPS time and a corresponding camera clock time.  While
+these formats may be used for a simple (constant) time synchronization offset,
+they are necessary when performing a clock drift correction (with multiple
+synchronization points), and are described below.</p>
+<p><b>Camera clock drift correction:</b></p>
+<p>A more advanced <code>Geosync</code> feature allows the GPS time and the
+image time to be specified together, facilitating a time drift correction if
+more than one synchronization point is provided.  For this, the value written to
+<code>Geosync</code> takes one of the following forms:</p>
+<blockquote>
+<table class='norm'>
+<tr><th>Format</th><th>Notes</th></tr>
+<tr><td><i>FILE</i></td>
+<td>Both GPS and image timestamps are extracted from the
+specified file. eg) <code>-geosync=image.jpg</code></td></tr>
+<tr><td><i>GPSTIME</i>@<i>FILE</i></td><td>GPS time is taken from the
+<code>Geosync</code> value and the image timestamp is extracted from the
+specified file. eg) <code>-geosync="12:58:05@image.jpg"</code></td></tr>
+<tr><td><i>GPSTIME</i>@<i>IMGTIME</i></td><td>Both GPS and image timestamps are
+taken from the <code>Geosync</code> value.  eg)
+<code>-geosync="12:58:05@2010:01:02 12:25:26"</code></td></tr>
+</table></blockquote>
+<p>The values of <i>GPSTIME</i> and <i>IMGTIME</i> specified on the command line
+may contain a date, but it is not necessary.</p>
+<p>Notes:</p>
+<ol>
+<li>If either the GPS or the image timestamp does not contain a date, the two
+timestamps are assumed to be on days which place them within 12 hours of each
+other.</li>
+<li>If neither the GPS nor the image timestamps contain a date, this
+synchronization point may only be used for constant time offset (ie. no time
+drift correction will be applied).</li>
+<li>Both the GPS and the image times are assumed to be local unless another
+timezone is specified.</li>
+<li>Both the GPS and the image time values may contain decimal seconds.</li>
+<li>The applied value of the time drift correction is calculated from a
+piecewise linear interpolation/extrapolation between the synchronization points
+if more than one <code>Geosync</code> value is defined.</li>
+<li>When extracting from file, timestamps are taken from the first available of
+the following tags:
+<ul>
+<li>Image timestamp: SubSecDateTimeOriginal, SubSecCreateDate, SubSecModifyDate,
+DateTimeOriginal, CreateDate, ModifyDate, FileModifyDate</li>
+<li>GPS timestamp: GPSDateTime, GPSTimeStamp</li>
+</ul></li>
+</ol>
+<a name="geotime"></a>
+<h4>Geotime</h4>
+<p>The <code>Geotime</code> tag specifies the point in time for which the GPS
+position is calculated (by interpolating between fixes in the GPS track log).
+Unless a group is specified, exiftool writes the generated tags to the default
+groups.  If a value for <code>Geotime</code> is not given, it is taken from
+<code>DateTimeOriginal</code> for each image (as if
+<code>"-Geotime&lt;DateTimeOriginal"</code> had been specified), but the value
+may be copied from any other date/time tag or set directly from a date/time
+string.</p>
+<p>If the date/time tag does not include a timezone then one may be added (eg.
+<code>"-Geotime&lt;${CreateDate}-05:00"</code>), otherwise the local system time
+is assumed.  Decimal seconds are supported in the time value.</p>
+<p>By default, GPS tags are created in EXIF and the corresponding
+XMP tags are updated only if they already exist.  However, an EXIF or XMP group
+name may be specified to force writing only to the specified location.  For
+example, writing <code>XMP:Geotime</code> or <code>EXIF:Geotime</code> will
+write the generated GPS tags only to XMP or EXIF respectively.  Note that when
+written to XMP, the <code>GPSLatitudeRef</code> and <code>GPSLongitudeRef</code>
+tags are not used, and the XMP <code>GPSDateTime</code> tag is written instead
+of the separate EXIF <code>GPSDateStamp</code> and <code>GPSTimeStamp</code>
+tags.</p>
+<p>See the <a href="#Examples">Examples</a> section below for sample command
+lines illustrating various aspects of the geotagging feature.</p>
+<blockquote class=lt><i>Programmers:  Note that <code>Geotime</code> must always
+be specified when geotagging via the API -- the default value of
+<code>DateTimeOriginal</code> is implemented by the application.</i>
+</blockquote>
+<a name="Examples"></a>
+<h3>Examples</h3>
+<p>Geotag all images in the "c:\images" directory from position information in a
+GPS track log ("c:\gps logs\track.log").  Since the <code>Geotime</code> time is
+not specified, the value of <code>DateTimeOriginal</code> is used.  Local system
+time is assumed unless <code>DateTimeOriginal</code> contains a timezone:</p>
+<pre>exiftool -geotag "c:\gps logs\track.log" c:\images</pre>
+<p>Geotag all images in directory "dir" from the GPS positions in "track.log"
+(in the current directory), for a camera clock that was running 25 seconds
+slower than the GPS clock:</p>
+<pre>exiftool -geotag track.log -geosync=+25 dir</pre>
+<p>Geotag an image with the GPS position for a specific time.  (Note that the
+<code>Geotag</code> tag must be assigned before <code>Geotime</code> for the GPS
+data to be available when <code>Geotime</code> is set):</p>
+<pre>exiftool -geotag t.log -geotime="2009:04:02 13:41:12-05:00" a.jpg</pre>
+<p>Geotag all images in directory "dir" with XMP tags instead of EXIF tags,
+based on the image <code>CreateDate</code>.  (In this case, the order of the
+arguments doesn't matter because tags with values copied from other tags are
+always set after constant values):</p>
+<pre>exiftool -geotag log.gpx "-xmp:geotime&lt;createdate" dir</pre>
+<p>Geotag images in "dir" using <code>CreateDate</code> with the specified
+timezone.  If <code>CreateDate</code> already contained a timezone, then the
+timezone specified on the command line is ignored.  (Note that in Windows,
+double quotes (<code>"</code>) must be used instead of single quotes
+(<code>'</code>) around the <code>-geotime</code> argument in the next 2
+commands):</p>
+<pre>exiftool -geotag a.log '-geotime&lt;${createdate}+01:00' dir</pre>
+<p>Geotag images for which the camera clock was set to UTC (+00:00), using
+the time from <code>DateTimeOriginal</code>:</p>
+<pre>exiftool -geotag trk.gpx '-geotime&lt;${DateTimeOriginal}+00:00' dir</pre>
+<p>Delete GPS tags which were added by the geotag feature. (Note that this does
+not remove all GPS tags -- to do this instead use <code>-gps:all=</code>):</p>
+<pre>exiftool -geotag= a.jpg</pre>
+<p>Delete XMP GPS tags which were added by the geotag feature:</p>
+<pre>exiftool -xmp:geotag= a.jpg</pre>
+<p>Geotag an image with XMP tags, using the time from
+<code>DateTimeOriginal</code>:</p>
+<pre>exiftool -xmp:geotag=track.log a.jpg</pre>
+<p>Combine multiple track logs and geotag an entire directory tree of
+images:</p>
+<pre>exiftool -geotag a.log -geotag b.log -r dir</pre>
+<p>Use wildcards to load multiple track files (the quotes are necessary for most
+operating systems to prevent filename expansion):</p>
+<pre>exiftool -geotag "logs/*.log" dir</pre>
+<p>Geotag from a sub-second date/time value with a sub-second time synchronization
+(only possible if the EXIF sub-second time stamps are available):</p>
+<pre>exiftool -Geotag a.log -Geosync=+13.42 "-Geotime&lt;SubSecDateTimeOriginal" dir
+</pre>
+<p>Geotag images with a piecewise linear time drift correction using the GPS
+time synchronization from three already-geotagged images:</p>
+<pre>exiftool -geotag a.log -geosync=1.jpg -geosync=2.jpg -geosync=3.jpg dir
+</pre>
+<a name="Options"></a>
+<h3>Options</h3>
+<p>Geotagging may be configured via the following ExifTool options.  These
+options may be set using either the <code>-api</code> option of the command-line
+application, the Options() function of the API, or the
+%Image::ExifTool::UserDefined::Options hash of the config file.  (See the
+<a href="config.html">sample config file</a> for details about how to use the
+config file.)</p>
+<blockquote>
+<table class='norm'>
+<tr><th>Option</th><th>Description</th><th>Values</th><th>Default</th></tr>
+<tr><td>GeoMaxIntSecs</td>
+    <td>Maximum interpolation time in seconds for geotagging.  Geotagging is
+    treated as an extrapolation if the Geotime value lies between two fixes in
+    the same track which are separated by a number of seconds greater than this.
+     Otherwise, the coordinates are calculated as a linear interpolation between
+    the nearest fixes on either side of the Geotime value.  Set to 0 to disable
+    interpolation and use the coordinates of the nearest fix instead (provided
+    it is within GeoMaxExtSecs, otherwise geotagging fails).</td>
+    <td align='center'>A&nbsp;floating&nbsp;point&nbsp;number</td>
+    <td align='center'>1800</td></tr>
+<tr><td>GeoMaxExtSecs</td>
+    <td>Maximum extrapolation time in seconds for geotagging.  Geotagging fails
+    if the Geotime value lies outside a GPS track by a number of seconds greater
+    than this.  Otherwise, the coordinates of the nearest fix are taken.</td>
+    <td align='center'>A&nbsp;floating&nbsp;point&nbsp;number</td>
+    <td align='center'>1800</td></tr>
+<tr><td>GeoMaxHDOP</td>
+    <td>Maximum Horizontal (2D) Dilution Of Precision for geotagging.  GPS fixes are
+    ignored if the HDOP is greater than this.</td>
+    <td align='center'>A&nbsp;floating&nbsp;point&nbsp;number, or undef to disable</td>
+    <td align='center'>undef</td></tr>
+<tr><td>GeoMaxPDOP</td>
+    <td>Maximum Position (3D) Dilution Of Precision for geotagging.  GPS fixes are
+    ignored if the PDOP is greater than this.</td>
+    <td align='center'>A&nbsp;floating&nbsp;point&nbsp;number, or undef to disable</td>
+    <td align='center'>undef</td></tr>
+<tr><td>GeoMinSats</td>
+    <td>Minimum number of satellites for geotagging.  GPS fixes are ignored if the
+    number of acquired satellites is less than this.</td>
+    <td align='center'>A positive integer, or undef to disable</td>
+    <td align='center'>undef</td></tr>
+</table></blockquote>
+<a name="Orient"></a>
+<h3>Orientation</h3>
+<p>ExifTool reads orientation information from the PTNTHPR sentence generated by
+some Honeywell digital compasses. This is a proprietary NMEA sentence which
+contains information about heading, pitch and roll angles.  When this
+information is available, the heading is written to GPSImgDirection (and
+GPSImgDirectionRef is set to "T"), but no standard GPS tags exist for pitch and
+roll.  Regardless, ExifTool attempts to write GPSPitch and GPSRoll tags. For
+this information to be stored, appropriate user-defined tags must be created.
+Below is a simple config file which defines the necessary EXIF GPS tags.
+Corresponding XMP-exif tags may also be created. See the
+<a href="config.html">config file documentation</a> for more information.</p>
+<pre>%Image::ExifTool::UserDefined = (
+    'Image::ExifTool::GPS::Main' => {
+        0xd000 => {
+            Name => 'GPSPitch',
+            Writable => 'rational64s',
+        },
+        0xd001 => {
+            Name => 'GPSRoll',
+            Writable => 'rational64s',
+        },
+    },
+);
+1; #end
+</pre>
+<a name="Troubleshooting"></a>
+<h3>Troubleshooting</h3>
+<a name="TR1"></a>
+<p>1. <b>"No track points found in GPS file"</b></p>
+<blockquote>If you see the above message, either exiftool does not yet support
+your track log file format, or your track log does not contain the necessary
+position/timestamp information.  For instance, in KML files each Placemark must
+contain a TimeStamp.  If you believe your track log contains the necessary
+information, please send me a sample file and I will add support for this
+format.</blockquote>
+<a name="TR2"></a>
+<p>2. <b>"0 image files updated"</b></p>
+<blockquote>If you see this message without any other warning messages, it is
+likely that <code>Geotime</code> didn't get set properly.</blockquote>
+<blockquote>Be sure that the necessary date/time tag exists in your image for
+copying to <code>Geotime</code>.  Unless otherwise specified, the required tag
+is <code>DateTimeOriginal</code>.  The following command may be used to list the
+names and values of all available date/time tags in an image:
+<pre>exiftool -s -time:all image.jpg
+</pre>
+Even if there is no metadata in the image you may be able to set
+<code>Geotime</code> from the filesystem modification date for the image (which
+will appear as <code>FileModifyDate</code> in the output of the above command).
+In this case you may also want to include the <code>-P</code> option to preserve
+the original value of <code>FileModifyDate</code>:
+<pre>exiftool -geotag track.gpx "-geotime&lt;filemodifydate" -P image.jpg
+</pre>
+Without the <code>-P</code> option, <code>FileModifyDate</code> is set to the
+current date/time when the file is rewritten.</blockquote>
+<a name="TR3"></a>
+<p>3. <b>"Warning: Time is too far before track in File:Geotime (ValueConvInv)"</b></p>
+<blockquote>If you see a warning like this, you may have a time zone problem,
+or a time synchronization issue.  Keep in mind that GPS times are in UTC, but
+the camera times are typically in your local time zone.</blockquote>
+<blockquote>To see more details about what ExifTool is doing, try adding the
+<code>-v2</code> option to your command.  You should then see messages like
+this if the GPS track log was loaded successfully:
+<pre>Loaded 372 points from GPS track log file 'my_track.log'
+  GPS track start: 2009:03:30 19:45:25 UTC
+  GPS track end:   2009:04:03 11:16:04 UTC
+</pre>
+If the number of points loaded and start/end times seem reasonable, then
+the problem is likely in the time synchronization.  Also printed will be the
+UTC time for the image:
+<pre>  Geotime value:   2009:04:03 10:57:01 UTC (local timezone is -05:00)
+</pre>
+The "Geotime value" must lie within 1/2 hour of a valid GPS fix in the track log
+for a position to be calculated. (1/2 hour is the default, but this can be
+configured via the geotagging <a href="#Options">Options</a>.)  The time
+calibration relies on proper synchronization between the GPS time and your
+camera's clock.  If a timezone is not specified, the local system time zone (as
+set by the shell's TZ environment variable) is printed in the above message and
+used to convert the <code>Geotime</code> value to UTC.  You should specify the
+timezone for <code>Geotime</code> if your images were taken in a different
+timezone (see <a href="#Examples">Examples</a> above).  If the camera clock was
+wrong, the <code>Geosync</code> tag may be used to apply a time correction, or
+the ExifTool time shift feature may be used to adjust the image times before
+geotagging -- see the <a href="#TP1">Time Synchronization</a> tip below for
+examples.</blockquote>
+<a name="Tips"></a>
+<h3>Tips</h3>
+<a name="TP1"></a>
+<p>1. <b>Time Synchronization</b></p>
+<blockquote>One way to accurately synchronize your images with GPS time is to
+take a picture of the time displayed on your GPS unit while you are out
+shooting.  Then after you download your images you can use this image to
+synchronize the image timestamps for geotagging.  This is done by using an image
+viewer to read the time from the GPS display in the image, and exiftool to
+extract <code>DateTimeOriginal</code> from the file. For example, if the time in
+the GPS display reads 19:32:21 UTC and <code>DateTimeOriginal</code> is
+14:31:49, then for this image the camera clock was 32 seconds slow (assuming
+that the timezone of the camera clock was <span class=nr>-05:00</span>). There
+are two different ways to use this time synchronization to improve your
+geotagging accuracy:
+</blockquote>
+<blockquote>A) Use the <code>Geosync</code> tag to specify the time difference
+while geotagging.  Using this technique the existing image timestamps will not
+be corrected, but the <code>GPSTimeStamp</code> tag created by the geotagging
+process will contain the correct GPS time:
+<pre>exiftool -geosync=+00:00:32 -geotag my_gps.log C:\Images
+</pre>
+or equivalently,
+<pre>exiftool -geosync=19:32:21Z@14:31:49-05:00 -geotag my_gps.log C:\Images
+</pre>
+<i class=lt>(Note that this technique may also be used for a more advanced time
+drift correction.  See the <a href='#geosync'>Geosync section above</a> for
+details)</i></blockquote>
+<blockquote>B) First fix the image timestamps by shifting them to synchronize
+with GPS time, then geotag using the corrected timestamps:
+<pre>exiftool -alldates+=00:00:32 C:\Images
+exiftool -geotag my_gps.log C:\Images
+</pre>
+Both examples above assume that your track log file (<code>my_gps.log</code>)
+is in the current directory, that the images were downloaded to the
+<code>C:\Images</code> directory, and that the computer and camera clocks are
+in the same timezone.</blockquote>
+<hr>
+<a name="Inverse"></a>
+<h2>Inverse Geotagging</h2>
+<p>The <code>-p</code> option may be used to output files in any number of formats.
+This section gives examples for creating GPX and KML output files from a set of
+geotagged images, or from a geotagged video file.  (But note that the
+<code>-ee</code> option must be added to the commands below to extract the full
+track from a video file, and currently only M2TS videos are supported for this
+feature.)</p>
+<a name="GPX"></a>
+<h4>Creating a GPX track log</h4>
+<p>The following print format file may be used to generate a GPX track log from
+one or more geotagged images:</p>
+<pre>#------------------------------------------------------------------------------
+# File:         gpx.fmt
+#
+# Description:  Example ExifTool print format file for generating GPX track log
+#
+# Usage:        exiftool -p gpx.fmt -d %Y-%m-%dT%H:%M:%SZ FILE [...] > out.gpx
+#
+# Requires:     ExifTool version 8.10 or later
+#
+# Revisions:    2010/02/05 - P. Harvey created
+#
+# Notes:     1) All input files must contain GPSLatitude and GPSLongitude.
+#            2) The -fileOrder option may be used to control the order of the
+#               generated track points.
+#------------------------------------------------------------------------------
+#[HEAD]&lt;?xml version="1.0" encoding="utf-8"?&gt;
+#[HEAD]&lt;gpx version="1.0"
+#[HEAD] creator="ExifTool $ExifToolVersion"
+#[HEAD] xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+#[HEAD] xmlns="http://www.topografix.com/GPX/1/0"
+#[HEAD] xsi:schemaLocation="http://www.topografix.com/GPX/1/0 http://www.topografix.com/GPX/1/0/gpx.xsd"&gt;
+#[HEAD]&lt;trk&gt;
+#[HEAD]&lt;number&gt;1&lt;/number&gt;
+#[HEAD]&lt;trkseg&gt;
+#[BODY]&lt;trkpt lat="$gpslatitude#" lon="$gpslongitude#"&gt;
+#[BODY]  &lt;ele&gt;$gpsaltitude#&lt;/ele&gt;
+#[BODY]  &lt;time&gt;$gpsdatetime&lt;/time&gt;
+#[BODY]&lt;/trkpt&gt;
+#[TAIL]&lt;/trkseg&gt;
+#[TAIL]&lt;/trk&gt;
+#[TAIL]&lt;/gpx&gt;
+</pre>
+<p>This example assumes that the <code>GPSLatitude</code>,
+<code>GPSLongitude</code>, <code>GPSAltitude</code> and <code>GPSDateTime</code>
+tags are all available in each processed <i>FILE</i>.  Warnings will be
+generated for missing tags.  The output GPX format will invalid if any
+<code>GPSLatitude</code> or <code>GPSLongitude</code> tags are missing, but will
+be OK for missing <code>GPSAltitude</code> or <code>GPSDateTime</code> tags.</p>
+<p>Note that the order of track points in the output GPX file will be the same
+as the order of processing the input files, which may not be chronological
+depending on how the files are named.  The <code>-fileOrder</code> option may be
+used to force processing of files in a particular order.  For example, the
+following command processes files in order of increasing <code>GPSDateTime</code>:
+</p>
+<pre>exiftool -fileOrder gpsdatetime -p gpx.fmt -d %Y-%m-%dT%H:%M:%SZ /Users/Phil/Pictures > out.gpx
+</pre>
+<p>Since no directory was specified for <code>gpx.fmt</code>, this file must
+exist in the current directory when the above command is executed. (If the
+<code>gpx.fmt</code> file can't be found then the <code>-p</code> argument is
+interpreted as a string instead of a file name, and the text
+"<code>gpx.fmt</code>" is sent to the output, which isn't what we want.)</p>
+<p>The <code>-if</code> option may be added to ensure that only files containing
+GPS information are processed.  For example, the following command creates
+"<code>out.gpx</code>" in the current directory from all pictures containing
+<code>GPSDateTime</code> information in directory "<code>pics</code>" and its
+sub-directories:</p>
+<pre>exiftool -r -if '$gpsdatetime' -fileOrder gpsdatetime -p gpx.fmt -d %Y-%m-%dT%H:%M:%SZ pics > out.gpx
+</pre>
+<p>Note:  In Windows, double quotes (<code>"</code>) must be used instead of
+single quotes (<code>'</code>) around the <code>-if</code> argument above.</p>
+<p>The "fmt_files" directory of the full exiftool distribution contains this
+sample format file ("gpx.fmt") as well as a sample which creates GPX waypoints
+with pictures ("gpx_wpt.fmt").</p>
+<a name="KML"></a>
+<h4>Creating a Google Earth KML file</h4>
+<p>Below is an example of a print format file which generates a Google Earth KML
+file from a collection of geotagged images:</p>
+<pre>#------------------------------------------------------------------------------
+# File:         kml.fmt
+#
+# Description:  Example ExifTool print format file for generating a
+#               Google Earth KML file from a collection of geotagged images
+#
+# Usage:        exiftool -p kml.fmt FILE [...] > out.kml
+#
+# Requires:     ExifTool version 8.10 or later
+#
+# Revisions:    2010/02/05 - P. Harvey created
+#               2013/02/05 - PH Fixed camera icon to work with new Google Earth
+#
+# Notes:     1) All input files must contain GPSLatitude and GPSLongitude.
+#            2) For Google Earth to be able to find the images, the input
+#               images must be specified using relative paths, and "out.kml"
+#               must stay in the same directory as where the command was run.
+#            3) Google Earth is picky about the case of the image file extension,
+#               and may not be able to display the image if an upper-case
+#               extension is used.
+#            4) The -fileOrder option may be used to control the order of the
+#               generated placemarks.
+#------------------------------------------------------------------------------
+#[HEAD]&lt;?xml version="1.0" encoding="UTF-8"?&gt;
+#[HEAD]&lt;kml xmlns="http://earth.google.com/kml/2.0"&gt;
+#[HEAD]  &lt;Document&gt;
+#[HEAD]    &lt;name&gt;My Photos&lt;/name&gt;
+#[HEAD]    &lt;open&gt;1&lt;/open&gt;
+#[HEAD]    &lt;Style id="Photo"&gt;
+#[HEAD]      &lt;IconStyle&gt;
+#[HEAD]        &lt;Icon&gt;
+#[HEAD]          &lt;href&gt;http://maps.google.com/mapfiles/kml/pal4/icon38.png&lt;/href&gt;
+#[HEAD]          &lt;scale&gt;1.0&lt;/scale&gt;
+#[HEAD]        &lt;/Icon&gt;
+#[HEAD]      &lt;/IconStyle&gt;
+#[HEAD]    &lt;/Style&gt;
+#[HEAD]    &lt;Folder&gt;
+#[HEAD]      &lt;name&gt;Waypoints&lt;/name&gt;
+#[HEAD]      &lt;open&gt;0&lt;/open&gt;
+#[BODY]      &lt;Placemark&gt;
+#[BODY]        &lt;description&gt;&lt;![CDATA[&lt;br/&gt;&lt;table&gt;&lt;tr&gt;&lt;td&gt;
+#[BODY]        &lt;img src='$directory/$filename'
+#[BODY]          width='$imagewidth' height='$imageheight'&gt;
+#[BODY]        &lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;]]&gt;&lt;/description&gt;
+#[BODY]        &lt;Snippet/&gt;
+#[BODY]        &lt;name&gt;$filename&lt;/name&gt;
+#[BODY]        &lt;styleUrl&gt;#Photo&lt;/styleUrl&gt;
+#[BODY]        &lt;Point&gt;
+#[BODY]          &lt;altitudeMode&gt;clampedToGround&lt;/altitudeMode&gt;
+#[BODY]          &lt;coordinates&gt;$gpslongitude#,$gpslatitude#,0&lt;/coordinates&gt;
+#[BODY]        &lt;/Point&gt;
+#[BODY]      &lt;/Placemark&gt;
+#[TAIL]    &lt;/Folder&gt;
+#[TAIL]  &lt;/Document&gt;
+#[TAIL]&lt;/kml&gt;
+</pre>
+<p>This example print format file is included in the "fmt_files" directory of
+the full ExifTool distribution.</p>
+<hr>
+<i>Created Apr. 2, 2009</i><br>
+<i>Last revised Mar. 5, 2015</i>
+<p class='lf'><a href="index.html">&lt;-- Back to ExifTool home page</a></p>
+</body>
+</html>