exiftool_vendored 9.78.0 → 9.99.0

data/bin/Image-ExifTool-9.78/lib/Image/ExifTool/WritePostScript.pl

@@ -1,777 +0,0 @@
-#------------------------------------------------------------------------------
-# File:         WritePostScript.pl
-#
-# Description:  Write PostScript meta information
-#
-# Revisions:    03/03/2006 - P. Harvey Created
-#
-# References:   (see references in PostScript.pm, plus:)
-#               1) http://www.adobe.com/products/postscript/pdfs/PLRM.pdf
-#               2) http://www-cdf.fnal.gov/offline/PostScript/PLRM2.pdf
-#               3) http://partners.adobe.com/public/developer/en/acrobat/sdk/pdf/pdf_creation_apis_and_specs/pdfmarkReference.pdf
-#               4) http://www.npes.org/standards/Tools/DCS20Spec.pdf
-#
-# Notes:        (see NOTES in POD doc below)
-#------------------------------------------------------------------------------
-
-package Image::ExifTool::PostScript;
-
-use strict;
-
-# Structure of a DSC PS/EPS document:
-#
-#   %!PS-Adobe-3.0     [plus " EPSF-3.0" for EPS]
-#     <comments>
-#   %%EndComments      [optional]
-#   %%BeginXxxx
-#     <stuff to ignore>
-#   %%EndXxxx
-#   %%BeginProlog
-#     <prolog stuff>
-#   %%EndProlog
-#   %%BeginSetup
-#     <setup stuff>
-#   %%EndSetup
-#   %ImageData x x x x  [written by Photoshop]
-#   %BeginPhotoshop: xxxx
-#     <ascii-hex IRB information>
-#   %EndPhotosop
-#   %%BeginICCProfile: (name) <num> <type>
-#     <ICC Profile info>
-#   %%EndICCProfile
-#   %begin_xml_code
-#     <postscript code to define and read the XMP stream object>
-#   %begin_xml_packet: xxxx
-#     <XMP data>
-#   %end_xml_packet
-#     <postscript code to add XMP stream to dictionary>
-#   %end_xml_code
-#   %%Page: x x         [PS only (optional?)]
-#     <graphics commands>
-#   %%PageTrailer
-#   %%Trailer
-#     <a bit more code to bracket EPS content for distiller>
-#   %%EOF
-
-# map of where information is stored in PS image
-my %psMap = (
-    XMP          => 'PostScript',
-    Photoshop    => 'PostScript',
-    IPTC         => 'Photoshop',
-    EXIFInfo     => 'Photoshop',
-    IFD0         => 'EXIFInfo',
-    IFD1         => 'IFD0',
-    ICC_Profile  => 'PostScript',
-    ExifIFD      => 'IFD0',
-    GPS          => 'IFD0',
-    SubIFD       => 'IFD0',
-    GlobParamIFD => 'IFD0',
-    PrintIM      => 'IFD0',
-    InteropIFD   => 'ExifIFD',
-    MakerNotes   => 'ExifIFD',
-);
-
-
-#------------------------------------------------------------------------------
-# Write XMP directory to file, with begin/end tokens if necessary
-# Inputs: 0) outfile ref, 1) flags hash ref, 2-N) data to write
-# Returns: true on success
-sub WriteXMPDir($$@)
-{
-    my $outfile = shift;
-    my $flags = shift;
-    my $success = 1;
-    Write($outfile, "%begin_xml_code$/") or $success = 0 unless $$flags{WROTE_BEGIN};
-    Write($outfile, @_) or $success = 0;
-    Write($outfile, "%end_xml_code$/") or $success = 0 unless $$flags{WROTE_BEGIN};
-    return $success;
-}
-
-#------------------------------------------------------------------------------
-# Write a directory inside a PS document
-# Inputs: 0) ExifTool object ref, 1) output file reference,
-#         2) Directory name, 3) data reference, 4) flags hash ref
-# Returns: 0=error, 1=nothing written, 2=dir written ok
-sub WritePSDirectory($$$$$)
-{
-    my ($et, $outfile, $dirName, $dataPt, $flags) = @_;
-    my $success = 2;
-    my $len = $dataPt ? length($$dataPt) : 0;
-    my $create = $len ? 0 : 1;
-    my %dirInfo = (
-        DataPt => $dataPt,
-        DataLen => $len,
-        DirStart => 0,
-        DirLen => $len,
-        DirName => $dirName,
-        Parent => 'PostScript',
-    );
-    # Note: $$flags{WROTE_BEGIN} may be 1 for XMP (it is always 0 for
-    # other dirs, but if 1, the begin/end markers were already written)
-#
-# prepare necessary postscript code to support embedded XMP
-#
-    my ($beforeXMP, $afterXMP, $reportedLen);
-    if ($dirName eq 'XMP' and $len) {
-        # isolate the XMP
-        pos($$dataPt) = 0;
-        unless ($$dataPt =~ /(.*)(<\?xpacket begin=.{7,13}W5M0MpCehiHzreSzNTczkc9d)/sg) {
-            $et->Warn('No XMP packet start');
-            return WriteXMPDir($outfile, $flags, $$dataPt);
-        }
-        $beforeXMP = $1;
-        my $xmp = $2;
-        my $p1 = pos($$dataPt);
-        unless ($$dataPt =~ m{<\?xpacket end=.(w|r).\?>}sg) {
-            $et->Warn('No XMP packet end');
-            return WriteXMPDir($outfile, $flags, $$dataPt);
-        }
-        my $p2 = pos($$dataPt);
-        $xmp .= substr($$dataPt, $p1, $p2-$p1);
-        $afterXMP = substr($$dataPt, $p2);
-        # determine if we can adjust the XMP size
-        if ($beforeXMP =~ /%begin_xml_packet: (\d+)/s) {
-            $reportedLen = $1;
-            my @matches= ($beforeXMP =~ /\b$reportedLen\b/sg);
-            undef $reportedLen unless @matches == 2;
-        }
-        # must edit in place if we can't reliably change the XMP length
-        $dirInfo{InPlace} = 1 unless $reportedLen;
-        # process XMP only
-        $dirInfo{DataLen} = $dirInfo{DirLen} = length $xmp;
-        $dirInfo{DataPt} = \$xmp;
-    }
-    my $tagTablePtr = Image::ExifTool::GetTagTable("Image::ExifTool::${dirName}::Main");
-    my $val = $et->WriteDirectory(\%dirInfo, $tagTablePtr);
-    if (defined $val) {
-        $dataPt = \$val;    # use modified directory
-        $len = length $val;
-    } elsif ($dirName eq 'XMP') {
-        return 1 unless $len;
-        # just write the original XMP
-        return WriteXMPDir($outfile, $flags, $$dataPt);
-    }
-    unless ($len) {
-        return 1 if $create or $dirName ne 'XMP';   # nothing to create
-        # it would be really difficult to delete the XMP,
-        # so instead we write a blank XMP record
-        $val = <<EMPTY_XMP;
-<?xpacket begin='' id='W5M0MpCehiHzreSzNTczkc9d'?>
-<x:xmpmeta xmlns:x='adobe:ns:meta/' x:xmptk='Image::ExifTool $Image::ExifTool::VERSION'>
-</x:xmpmeta>
-EMPTY_XMP
-        $val .= ((' ' x 100) . "\n") x 24 unless $et->Options('Compact');
-        $val .= q{<?xpacket end='w'?>};
-        $dataPt = \$val;
-        $len = length $val;
-    }
-#
-# write XMP directory
-#
-    if ($dirName eq 'XMP') {
-        if ($create) {
-            # create necessary PS/EPS code to support XMP
-            $beforeXMP = <<HDR_END;
-/pdfmark where {pop true} {false} ifelse
-/currentdistillerparams where {pop currentdistillerparams
-/CoreDistVersion get 5000 ge } {false} ifelse
-and not {userdict /pdfmark /cleartomark load put} if
-[/NamespacePush pdfmark
-[/_objdef {exiftool_metadata_stream} /type /stream /OBJ pdfmark
-[{exiftool_metadata_stream} 2 dict begin /Type /Metadata def
-  /Subtype /XML def currentdict end /PUT pdfmark
-/MetadataString $len string def % exact length of metadata
-/TempString 100 string def
-/ConsumeMetadata {
-currentfile TempString readline pop pop
-currentfile MetadataString readstring pop pop
-} bind def
-ConsumeMetadata
-%begin_xml_packet: $len
-HDR_END
-            # note: use q() to get necessary linefeed before %end_xml_packet
-            $afterXMP = q(
-%end_xml_packet
-[{exiftool_metadata_stream} MetadataString /PUT pdfmark
-);
-            if ($$flags{EPS}) {
-                $afterXMP .= <<EPS_AFTER;
-[/Document 1 dict begin
-  /Metadata {exiftool_metadata_stream} def currentdict end /BDC pdfmark
-[/NamespacePop pdfmark
-EPS_AFTER
-                # write this at end of file
-                $$flags{TRAILER} = "[/EMC pdfmark$/";
-            } else { # PS
-                $afterXMP .= <<PS_AFTER;
-[{Catalog} {exiftool_metadata_stream} /Metadata pdfmark
-[/NamespacePop pdfmark
-PS_AFTER
-            }
-            $beforeXMP =~ s{\n}{$/}sg;  # use proper newline characters
-            $afterXMP =~ s{\n}{$/}sg;
-        } else {
-            # replace xmp size in PS code
-            $reportedLen and $beforeXMP =~ s/\b$reportedLen\b/$len/sg;
-        }
-        WriteXMPDir($outfile, $flags, $beforeXMP, $$dataPt, $afterXMP) or $success = 0;
-#
-# Write Photoshop or ICC_Profile directory
-#
-    } elsif ($dirName eq 'Photoshop' or $dirName eq 'ICC_Profile') {
-        my ($startToken, $endToken);
-        if ($dirName eq 'Photoshop') {
-            $startToken = "%BeginPhotoshop: $len";
-            $endToken = '%EndPhotoshop';
-        } else {
-            $startToken = '%%BeginICCProfile: (Photoshop Profile) -1 Hex';
-            $endToken = '%%EndICCProfile';
-        }
-        Write($outfile, $startToken, $/) or $success = 0;
-        # write as an ASCII-hex comment
-        my $i;
-        my $wid = 32;
-        for ($i=0; $i<$len; $i+=$wid) {
-            $wid > $len-$i and $wid = $len-$i;
-            my $dat = substr($$dataPt, $i, $wid);
-            Write($outfile, "% ", uc(unpack('H*',$dat)), $/) or $success = 0;
-        }
-        Write($outfile, $endToken, $/) or $success = 0;
-    } else {
-        $et->Warn("Can't write PS directory $dirName");
-    }
-    undef $val;
-    return $success;
-}
-
-#------------------------------------------------------------------------------
-# Encode postscript tag/value
-# Inputs: 0) tag ID, 1) value
-# Returns: postscript comment
-# - adds brackets, escapes special characters, and limits line length
-sub EncodeTag($$)
-{
-    my ($tag, $val) = @_;
-    unless ($val =~ /^\d+$/) {
-        $val =~ s/([()\\])/\\$1/g;  # escape brackets and backslashes
-        $val =~ s/\n/\\n/g;         # escape newlines
-        $val =~ s/\r/\\r/g;         # escape carriage returns
-        $val =~ s/\t/\\t/g;         # escape tabs
-        # use octal escape codes for other control characters
-        $val =~ s/([\x00-\x1f\x7f\xff])/sprintf("\\%.3o",ord($1))/ge;
-        $val = "($val)";
-    }
-    my $line = "%%$tag: $val";
-    # postscript line limit is 255 characters (but it seems that
-    # the limit may be 254 characters if the DOS CR/LF is used)
-    # --> split if necessary using continuation comment "%%+"
-    my $n;
-    for ($n=254; length($line)>$n; $n+=254+length($/)) {
-        substr($line, $n, 0) = "$/%%+";
-    }
-    return $line . $/;
-}
-
-#------------------------------------------------------------------------------
-# Write new tags information in comments section
-# Inputs: 0) ExifTool object ref, 1) output file ref, 2) reference to new tag hash
-# Returns: true on success
-sub WriteNewTags($$$)
-{
-    my ($et, $outfile, $newTags) = @_;
-    my $success = 1;
-    my $tag;
-
-    # get XMP hint and remove from tags hash
-    my $xmpHint = $$newTags{XMP_HINT};
-    delete $$newTags{XMP_HINT};
-
-    foreach $tag (sort keys %$newTags) {
-        my $tagInfo = $$newTags{$tag};
-        my $nvHash = $et->GetNewValueHash($tagInfo);
-        next unless $$nvHash{IsCreating};
-        my $val = $et->GetNewValues($nvHash);
-        $et->VerboseValue("+ PostScript:$$tagInfo{Name}", $val);
-        Write($outfile, EncodeTag($tag, $val)) or $success = 0;
-        ++$$et{CHANGED};
-    }
-    # write XMP hint if necessary
-    Write($outfile, "%ADO_ContainsXMP: MainFirst$/") or $success = 0 if $xmpHint;
-
-    %$newTags = ();     # all done with new tags
-    return $success;
-}
-
-#------------------------------------------------------------------------------
-# check to be sure we haven't read past end of PS data in DOS-style file
-# Inputs: 0) RAF ref, 1) pointer to end of PS, 2) data
-# - modifies data and sets RAF to EOF if end of PS is reached
-sub CheckPSEnd($$$)
-{
-    my $pos = $_[0]->Tell();
-    if ($pos >= $_[1]) {
-        $_[0]->Seek(0, 2);   # seek to end of file so we can't read any more
-        $_[2] = substr($_[2], 0, length($_[2]) - $pos + $_[1]) if $pos > $_[1];
-    }
-}
-
-#------------------------------------------------------------------------------
-# Split into lines ending in any CR, LF or CR+LF combination
-# (this is annoying, and could be avoided if EPS files didn't mix linefeeds!)
-# Inputs: 0) data pointer, 1) reference to lines array
-# Notes: Updates data to contain next line and fills list with remaining lines
-sub SplitLine($$)
-{
-    my ($dataPt, $lines) = @_;
-    for (;;) {
-        my $endl;
-        # find the position of the first LF (\x0a)
-        $endl = pos($$dataPt), pos($$dataPt) = 0 if $$dataPt =~ /\x0a/g;
-        if ($$dataPt =~ /\x0d/g) { # find the first CR (\x0d)
-            if (defined $endl) {
-                # (remember, CR+LF is a DOS newline...)
-                $endl = pos($$dataPt) if pos($$dataPt) < $endl - 1;
-            } else {
-                $endl = pos($$dataPt);
-            }
-        } elsif (not defined $endl) {
-            push @$lines, $$dataPt;
-            last;
-        }
-        # split into separate lines
-        if (length $$dataPt == $endl) {
-            push @$lines, $$dataPt;
-            last;
-        } else {
-            push @$lines, substr($$dataPt, 0, $endl);
-            $$dataPt = substr($$dataPt, $endl);
-        }
-    }
-    $$dataPt = shift @$lines;   # set $$dataPt to first line
-}
-
-#------------------------------------------------------------------------------
-# Write PS file
-# Inputs: 0) ExifTool object reference, 1) source dirInfo reference
-# Returns: 1 on success, 0 if this wasn't a valid PS file,
-#          or -1 if a write error occurred
-sub WritePS($$)
-{
-    my ($et, $dirInfo) = @_;
-    $et or return 1;    # allow dummy access to autoload this package
-    my $tagTablePtr = Image::ExifTool::GetTagTable('Image::ExifTool::PostScript::Main');
-    my $raf = $$dirInfo{RAF};
-    my $outfile = $$dirInfo{OutFile};
-    my $verbose = $et->Options('Verbose');
-    my $out = $et->Options('TextOut');
-    my ($data, $buff, %flags, $err, $mode, $endToken);
-    my ($dos, $psStart, $psEnd, $psNewStart, $xmpHint);
-
-    $raf->Read($data, 4) == 4 or return 0;
-    return 0 unless $data =~ /^(%!PS|%!Ad|\xc5\xd0\xd3\xc6)/;
-
-    if ($data =~ /^%!Ad/) {
-        # I've seen PS files start with "%!Adobe-PS"...
-        return 0 unless $raf->Read($buff, 6) == 6 and $buff eq "obe-PS";
-        $data .= $buff;
-
-    } elsif ($data =~ /^\xc5\xd0\xd3\xc6/) {
-#
-# process DOS binary PS files
-#
-        # save DOS header then seek ahead and check PS header
-        $raf->Read($dos, 26) == 26 or return 0;
-        $dos = $data . $dos;
-        SetByteOrder('II');
-        $psStart = Get32u(\$dos, 4);
-        unless ($raf->Seek($psStart, 0) and
-                $raf->Read($data, 4) == 4 and $data eq '%!PS')
-        {
-            $et->Error('Invalid PS header');
-            return 1;
-        }
-        $psEnd = $psStart + Get32u(\$dos, 8);
-        my $base = Get32u(\$dos, 20);
-        Set16u(0xffff, \$dos, 28);  # ignore checksum
-        if ($base) {
-            my %dirInfo = (
-                Parent => 'PS',
-                RAF => $raf,
-                Base => $base,
-                NoTiffEnd => 1, # no end-of-TIFF check
-            );
-            $buff = $et->WriteTIFF(\%dirInfo);
-            SetByteOrder('II'); # (WriteTIFF may change this)
-            if ($buff) {
-                $buff = substr($buff, $base);   # remove header written by WriteTIFF()
-            } else {
-                # error rewriting TIFF, so just copy over original data
-                my $len = Get32u(\$dos, 24);
-                unless ($raf->Seek($base, 0) and $raf->Read($buff, $len) == $len) {
-                    $et->Error('Error reading embedded TIFF');
-                    return 1;
-                }
-                $et->Warn('Bad embedded TIFF');
-            }
-            Set32u(0, \$dos, 12);                   # zero metafile pointer
-            Set32u(0, \$dos, 16);                   # zero metafile length
-            Set32u(length($dos), \$dos, 20);        # set TIFF pointer
-            Set32u(length($buff), \$dos, 24);       # set TIFF length
-        } elsif (($base = Get32u(\$dos, 12)) != 0) {
-            # copy over metafile section
-            my $len = Get32u(\$dos, 16);
-            unless ($raf->Seek($base, 0) and $raf->Read($buff, $len) == $len) {
-                $et->Error('Error reading metafile section');
-                return 1;
-            }
-            Set32u(length($dos), \$dos, 12);        # set metafile pointer
-        } else {
-            $buff = '';
-        }
-        $psNewStart = length($dos) + length($buff);
-        Set32u($psNewStart, \$dos, 4);  # set pointer to start of PS
-        Write($outfile, $dos, $buff) or $err = 1;
-        $raf->Seek($psStart + 4, 0);    # seek back to where we were
-    }
-#
-# rewrite PostScript data
-#
-    local $/ = GetInputRecordSeparator($raf);
-    unless ($/ and $raf->ReadLine($buff)) {
-        $et->Error('Invalid PostScript data');
-        return 1;
-    }
-    $data .= $buff;
-    unless ($data =~ /^%!PS-Adobe-3\.(\d+)\b/ and $1 < 2) {
-        if ($et->Error("Document does not conform to DSC spec. Metadata may be unreadable by other apps", 2)) {
-            return 1;
-        }
-    }
-    my $psRev = $1; # save PS revision number (3.x)
-    Write($outfile, $data) or $err = 1;
-    $flags{EPS} = 1 if $data =~ /EPSF/;
-
-    # get hash of new information keyed by tagID and directories to add/edit
-    my $newTags = $et->GetNewTagInfoHash($tagTablePtr);
-
-    # figure out which directories we need to write (PostScript takes priority)
-    $et->InitWriteDirs(\%psMap, 'PostScript');
-    my $addDirs = $$et{ADD_DIRS};
-    my $editDirs = $$et{EDIT_DIRS};
-    my %doneDir;
-
-    # set XMP hint flag (1 for adding, 0 for deleting, undef for no change)
-    $xmpHint = 1 if $$addDirs{XMP};
-    $xmpHint = 0 if $$et{DEL_GROUP}{XMP};
-    $$newTags{XMP_HINT} = $xmpHint if $xmpHint;  # add special tag to newTags list
-
-    my (@lines, $changedNL);
-    my $altnl = ($/ eq "\x0d") ? "\x0a" : "\x0d";
-
-    for (;;) {
-        if (@lines) {
-            $data = shift @lines;
-        } else {
-            $raf->ReadLine($data) or last;
-            $dos and CheckPSEnd($raf, $psEnd, $data);
-            # split line if it contains other newline sequences
-            if ($data =~ /$altnl/) {
-                if (length($data) > 500000 and IsPC()) {
-                    # patch for Windows memory problem
-                    unless ($changedNL) {
-                        $changedNL = 1;
-                        my $t = $/;
-                        $/ = $altnl;
-                        $altnl = $t;
-                        $raf->Seek(-length($data), 1);
-                        next;
-                    }
-                } else {
-                    # split into separate lines
-                    SplitLine(\$data, \@lines);
-                }
-            }
-        }
-        undef $changedNL;
-        if ($endToken) {
-            # look for end token
-            if ($data =~ m/^$endToken\s*$/is) {
-                undef $endToken;
-                # found end: process this information
-                if ($mode) {
-                    $doneDir{$mode} and $et->Error("Multiple $mode directories", 1);
-                    $doneDir{$mode} = 1;
-                    WritePSDirectory($et, $outfile, $mode, \$buff, \%flags) or $err = 1;
-                    # write end token if we wrote the begin token
-                    Write($outfile, $data) or $err = 1 if $flags{WROTE_BEGIN};
-                    undef $buff;
-                } else {
-                    Write($outfile, $data) or $err = 1;
-                }
-            } else {
-                # buffer data in current begin/end block
-                if (not defined $mode) {
-                    # pick up XMP in unrecognized blocks for editing in place
-                    if ($data =~ /^<\?xpacket begin=.{7,13}W5M0MpCehiHzreSzNTczkc9d/ and
-                        $$editDirs{XMP})
-                    {
-                        $buff = $data;
-                        $mode = 'XMP';
-                    } else {
-                        Write($outfile, $data) or $err = 1;
-                    }
-                } elsif ($mode eq 'XMP') {
-                    $buff .= $data;
-                } else {
-                    # data is ASCII-hex encoded
-                    $data =~ tr/0-9A-Fa-f//dc;  # remove all but hex characters
-                    $buff .= pack('H*', $data); # translate from hex
-                }
-            }
-            next;
-        } elsif ($data =~ m{^(%{1,2})(Begin)(?!Object:)(.*?)[:\x0d\x0a]}i) {
-            # comments section is over... write any new tags now
-            WriteNewTags($et, $outfile, $newTags) or $err = 1 if %$newTags;
-            undef $xmpHint;
-            # the beginning of a data block (can only write XMP and Photoshop)
-            my %modeLookup = (
-                _xml_code => 'XMP',
-                photoshop => 'Photoshop',
-                iccprofile => 'ICC_Profile',
-            );
-            $verbose > 1 and print $out "$2$3\n";
-            $endToken = $1 . ($2 eq 'begin' ? 'end' : 'End') . $3;
-            $mode = $modeLookup{lc($3)};
-            if ($mode and $$editDirs{$mode}) {
-                $buff = '';     # initialize buffer for this block
-                $flags{WROTE_BEGIN} = 0;
-            } else {
-                undef $mode;    # not editing this directory
-                Write($outfile, $data) or $err = 1;
-                $flags{WROTE_BEGIN} = 1;
-            }
-            next;
-        } elsif ($data =~ /^%%(?!Page:|PlateFile:|BeginObject:)(\w+): ?(.*)/s) {
-            # rewrite information from PostScript tags in comments
-            my ($tag, $val) = ($1, $2);
-            # handle Adobe Illustrator files specially
-            # - EVENTUALLY IT WOULD BE BETTER TO FIND ANOTHER IDENTIFICATION METHOD
-            #   (because Illustrator doesn't care if the Creator is changed)
-            if ($tag eq 'Creator' and $val =~ /^Adobe Illustrator/) {
-                # disable writing XMP to PS-format Adobe Illustrator files and
-                # older Illustrator EPS files becaues it confuses Illustrator
-                # (Illustrator 8 and older write PS-Adobe-3.0, newer write PS-Adobe-3.1)
-                if ($$editDirs{XMP} and $psRev == 0) {
-                    if ($flags{EPS}) {
-                        $et->Warn("Can't write XMP to Illustrator 8 or older EPS files");
-                    } else {
-                        $et->Warn("Can't write XMP to PS-format AI files");
-                    }
-                    # pretend like we wrote it already so we won't try to add it later
-                    $doneDir{XMP} = 1;
-                }
-                # don't allow "Creator" to be changed in Illustrator files
-                # (we need it to be able to recognize these files)
-                # --> find a better way to do this!
-                if ($$newTags{$tag}) {
-                    $et->Warn("Can't change Postscript:Creator of Illustrator files");
-                    delete $$newTags{$tag};
-                }
-            }
-            if ($$newTags{$tag}) {
-                my $tagInfo = $$newTags{$tag};
-                delete $$newTags{$tag}; # write it then forget it
-                next unless ref $tagInfo;
-                # decode comment string (reading continuation lines if necessary)
-                $val = DecodeComment($val, $raf, \@lines, \$data);
-                $val = join $et->Options('ListSep'), @$val if ref $val eq 'ARRAY';
-                my $nvHash = $et->GetNewValueHash($tagInfo);
-                if ($et->IsOverwriting($nvHash, $val)) {
-                    $et->VerboseValue("- PostScript:$$tagInfo{Name}", $val);
-                    $val = $et->GetNewValues($nvHash);
-                    ++$$et{CHANGED};
-                    next unless defined $val;   # next if tag is being deleted
-                    $et->VerboseValue("+ PostScript:$$tagInfo{Name}", $val);
-                    $data = EncodeTag($tag, $val);
-                }
-            }
-        # (note: Adobe InDesign doesn't put colon after %ADO_ContainsXMP -- doh!)
-        } elsif (defined $xmpHint and $data =~ m{^%ADO_ContainsXMP:? ?(.+?)[\x0d\x0a]*$}s) {
-            # change the XMP hint if necessary
-            if ($xmpHint) {
-                $data = "%ADO_ContainsXMP: MainFirst$/" if $1 eq 'NoMain';
-            } else {
-                $data = "%ADO_ContainsXMP: NoMain$/";
-            }
-            # delete XMP hint flags
-            delete $$newTags{XMP_HINT};
-            undef $xmpHint;
-        } else {
-            # look for end of comments section
-            if (%$newTags and ($data !~ /^%\S/ or
-                $data =~ /^%(%EndComments|%Page:|%PlateFile:|%BeginObject:|.*BeginLayer)/))
-            {
-                # write new tags at end of comments section
-                WriteNewTags($et, $outfile, $newTags) or $err = 1;
-                undef $xmpHint;
-            }
-            # look for start of drawing commands (AI uses "%AI5_BeginLayer",
-            # and Helios uses "%%BeginObject:")
-            if ($data =~ /^%(%Page:|%PlateFile:|%BeginObject:|.*BeginLayer)/ or
-                $data !~ m{^(%.*|\s*)$}s)
-            {
-                # we have reached the first page or drawing command, so create necessary
-                # directories and copy the rest of the file, then all done
-                my $dir;
-                my $plateFile = ($data =~ /^%%PlateFile:/);
-                # create Photoshop first, then XMP if necessary
-                foreach $dir (qw{Photoshop ICC_Profile XMP}) {
-                    next unless $$editDirs{$dir} and not $doneDir{$dir};
-                    if ($plateFile) {
-                        # PlateFile comments may contain offsets so we can't edit these files!
-                        $et->Warn("Can only edit PostScript information DCS Plate files");
-                        last;
-                    }
-                    next unless $$addDirs{$dir} or $dir eq 'XMP';
-                    $flags{WROTE_BEGIN} = 0;
-                    WritePSDirectory($et, $outfile, $dir, undef, \%flags) or $err = 1;
-                    $doneDir{$dir} = 1;
-                }
-                # copy rest of file
-                if ($flags{TRAILER}) {
-                    # write trailer before %%EOF
-                    for (;;) {
-                        Write($outfile, $data) or $err = 1;
-                        if (@lines) {
-                            $data = shift @lines;
-                        } else {
-                            $raf->ReadLine($data) or undef($data), last;
-                            $dos and CheckPSEnd($raf, $psEnd, $data);
-                            if ($data =~ /[\x0d\x0a]%%EOF\b/g) {
-                                # split data before "%%EOF"
-                                # (necessary if data contains other newline sequences)
-                                my $pos = pos($data) - 5;
-                                push @lines, substr($data, $pos);
-                                $data = substr($data, 0, $pos);
-                            }
-                        }
-                        last if $data =~ /^%%EOF\b/;
-                    }
-                    Write($outfile, $flags{TRAILER}) or $err = 1;
-                }
-                # simply copy the rest of the file if any data is left
-                if (defined $data) {
-                    Write($outfile, $data) or $err = 1;
-                    Write($outfile, @lines) or $err = 1 if @lines;
-                    while ($raf->Read($data, 65536)) {
-                        $dos and CheckPSEnd($raf, $psEnd, $data);
-                        Write($outfile, $data) or $err = 1;
-                    }
-                }
-                last;   # all done!
-            }
-        }
-        # write new information or copy existing line
-        Write($outfile, $data) or $err = 1;
-    }
-    if ($dos and not $err) {
-        # must go back and set length of PS section in DOS header (very dumb design)
-        if (ref $outfile eq 'SCALAR') {
-            Set32u(length($$outfile) - $psNewStart, $outfile, 8);
-        } else {
-            my $pos = tell $outfile;
-            unless (seek($outfile, 8, 0) and
-                    print $outfile Set32u($pos - $psNewStart) and
-                    seek($outfile, $pos, 0))
-            {
-                $et->Error("Can't write DOS-style PS files in non-seekable stream");
-                $err = 1;
-            }
-        }
-    }
-    # issue warning if we couldn't write any information
-    unless ($err) {
-        my (@notDone, $dir);
-        delete $$newTags{XMP_HINT};
-        push @notDone, 'PostScript' if %$newTags;
-        foreach $dir (qw{Photoshop ICC_Profile XMP}) {
-            push @notDone, $dir if $$editDirs{$dir} and not $doneDir{$dir} and
-                                   not $$et{DEL_GROUP}{$dir};
-        }
-        @notDone and $et->Warn("Couldn't write ".join('/',@notDone).' information');
-    }
-    $endToken and $et->Error("File missing $endToken");
-    return $err ? -1 : 1;
-}
-
-
-1; # end
-
-__END__
-
-=head1 NAME
-
-Image::ExifTool::WritePostScript.pl - Write PostScript meta information
-
-=head1 SYNOPSIS
-
-This file is autoloaded by Image::ExifTool::PostScript.
-
-=head1 DESCRIPTION
-
-This file contains routines to write meta information in PostScript
-documents.  Six forms of meta information may be written:
-
-    1) PostScript comments (Adobe DSC specification)
-    2) XMP information embedded in a document-level XMP stream
-    3) EXIF information embedded in a Photoshop record
-    4) IPTC information embedded in a PhotoShop record
-    5) ICC_Profile information embedded in an ICCProfile record
-    6) TIFF information embedded in DOS-style binary header
-
-=head1 NOTES
-
-Currently, information is written only in the outer-level document.
-
-Photoshop will discard meta information in a PostScript document if it has
-to rasterize the image, and it will rasterize anything that doesn't contain
-the Photoshop-specific 'ImageData' tag.  So don't expect Photoshop to read
-any meta information added to EPS images that it didn't create.
-
-The following two acronyms may be confusing since they are so similar and
-have different meanings with respect to PostScript documents:
-
-    DSC = Document Structuring Conventions
-    DCS = Desktop Color Separation
-
-=head1 REFERENCES
-
-See references in L<PostScript.pm|Image::ExifTool::PostScript>, plus:
-
-=over 4
-
-=item L<http://www.adobe.com/products/postscript/pdfs/PLRM.pdf>
-
-=item L<http://www-cdf.fnal.gov/offline/PostScript/PLRM2.pdf>
-
-=item L<http://partners.adobe.com/public/developer/en/acrobat/sdk/pdf/pdf_creation_apis_and_specs/pdfmarkReference.pdf>
-
-=back
-
-=head1 ACKNOWLEDGEMENTS
-
-Thanks to Tim Kordick for his help testing the EPS writer.
-
-=head1 AUTHOR
-
-Copyright 2003-2014, Phil Harvey (phil at owl.phy.queensu.ca)
-
-This library is free software; you can redistribute it and/or modify it
-under the same terms as Perl itself.
-
-=head1 SEE ALSO
-
-L<Image::ExifTool::PostScript(3pm)|Image::ExifTool::PostScript>,
-L<Image::ExifTool(3pm)|Image::ExifTool>
-
-=cut