alphatau 0.1.0

data/ext/alphatau/native/sdl/include/SDL_revision.h

@@ -0,0 +1,2 @@
+#define SDL_REVISION "hg-0:aaaaaaaaaaah"
+#define SDL_REVISION_NUMBER 0

data/ext/alphatau/native/sdl/include/SDL_rwops.h

@@ -0,0 +1,254 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2018 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_rwops.h
+ *
+ *  This file provides a general interface for SDL to read and write
+ *  data streams.  It can easily be extended to files, memory, etc.
+ */
+
+#ifndef SDL_rwops_h_
+#define SDL_rwops_h_
+
+#include "SDL_stdinc.h"
+#include "SDL_error.h"
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* RWops Types */
+#define SDL_RWOPS_UNKNOWN   0U  /**< Unknown stream type */
+#define SDL_RWOPS_WINFILE   1U  /**< Win32 file */
+#define SDL_RWOPS_STDFILE   2U  /**< Stdio file */
+#define SDL_RWOPS_JNIFILE   3U  /**< Android asset */
+#define SDL_RWOPS_MEMORY    4U  /**< Memory stream */
+#define SDL_RWOPS_MEMORY_RO 5U  /**< Read-Only memory stream */
+
+/**
+ * This is the read/write operation structure -- very basic.
+ */
+typedef struct SDL_RWops
+{
+    /**
+     *  Return the size of the file in this rwops, or -1 if unknown
+     */
+    Sint64 (SDLCALL * size) (struct SDL_RWops * context);
+
+    /**
+     *  Seek to \c offset relative to \c whence, one of stdio's whence values:
+     *  RW_SEEK_SET, RW_SEEK_CUR, RW_SEEK_END
+     *
+     *  \return the final offset in the data stream, or -1 on error.
+     */
+    Sint64 (SDLCALL * seek) (struct SDL_RWops * context, Sint64 offset,
+                             int whence);
+
+    /**
+     *  Read up to \c maxnum objects each of size \c size from the data
+     *  stream to the area pointed at by \c ptr.
+     *
+     *  \return the number of objects read, or 0 at error or end of file.
+     */
+    size_t (SDLCALL * read) (struct SDL_RWops * context, void *ptr,
+                             size_t size, size_t maxnum);
+
+    /**
+     *  Write exactly \c num objects each of size \c size from the area
+     *  pointed at by \c ptr to data stream.
+     *
+     *  \return the number of objects written, or 0 at error or end of file.
+     */
+    size_t (SDLCALL * write) (struct SDL_RWops * context, const void *ptr,
+                              size_t size, size_t num);
+
+    /**
+     *  Close and free an allocated SDL_RWops structure.
+     *
+     *  \return 0 if successful or -1 on write error when flushing data.
+     */
+    int (SDLCALL * close) (struct SDL_RWops * context);
+
+    Uint32 type;
+    union
+    {
+#if defined(__ANDROID__)
+        struct
+        {
+            void *fileNameRef;
+            void *inputStreamRef;
+            void *readableByteChannelRef;
+            void *readMethod;
+            void *assetFileDescriptorRef;
+            long position;
+            long size;
+            long offset;
+            int fd;
+        } androidio;
+#elif defined(__WIN32__)
+        struct
+        {
+            SDL_bool append;
+            void *h;
+            struct
+            {
+                void *data;
+                size_t size;
+                size_t left;
+            } buffer;
+        } windowsio;
+#endif
+
+#ifdef HAVE_STDIO_H
+        struct
+        {
+            SDL_bool autoclose;
+            FILE *fp;
+        } stdio;
+#endif
+        struct
+        {
+            Uint8 *base;
+            Uint8 *here;
+            Uint8 *stop;
+        } mem;
+        struct
+        {
+            void *data1;
+            void *data2;
+        } unknown;
+    } hidden;
+
+} SDL_RWops;
+
+
+/**
+ *  \name RWFrom functions
+ *
+ *  Functions to create SDL_RWops structures from various data streams.
+ */
+/* @{ */
+
+extern DECLSPEC SDL_RWops *SDLCALL SDL_RWFromFile(const char *file,
+                                                  const char *mode);
+
+#ifdef HAVE_STDIO_H
+extern DECLSPEC SDL_RWops *SDLCALL SDL_RWFromFP(FILE * fp,
+                                                SDL_bool autoclose);
+#else
+extern DECLSPEC SDL_RWops *SDLCALL SDL_RWFromFP(void * fp,
+                                                SDL_bool autoclose);
+#endif
+
+extern DECLSPEC SDL_RWops *SDLCALL SDL_RWFromMem(void *mem, int size);
+extern DECLSPEC SDL_RWops *SDLCALL SDL_RWFromConstMem(const void *mem,
+                                                      int size);
+
+/* @} *//* RWFrom functions */
+
+
+extern DECLSPEC SDL_RWops *SDLCALL SDL_AllocRW(void);
+extern DECLSPEC void SDLCALL SDL_FreeRW(SDL_RWops * area);
+
+#define RW_SEEK_SET 0       /**< Seek from the beginning of data */
+#define RW_SEEK_CUR 1       /**< Seek relative to current read point */
+#define RW_SEEK_END 2       /**< Seek relative to the end of data */
+
+/**
+ *  \name Read/write macros
+ *
+ *  Macros to easily read and write from an SDL_RWops structure.
+ */
+/* @{ */
+#define SDL_RWsize(ctx)         (ctx)->size(ctx)
+#define SDL_RWseek(ctx, offset, whence) (ctx)->seek(ctx, offset, whence)
+#define SDL_RWtell(ctx)         (ctx)->seek(ctx, 0, RW_SEEK_CUR)
+#define SDL_RWread(ctx, ptr, size, n)   (ctx)->read(ctx, ptr, size, n)
+#define SDL_RWwrite(ctx, ptr, size, n)  (ctx)->write(ctx, ptr, size, n)
+#define SDL_RWclose(ctx)        (ctx)->close(ctx)
+/* @} *//* Read/write macros */
+
+
+/**
+ *  Load all the data from an SDL data stream.
+ *
+ *  The data is allocated with a zero byte at the end (null terminated)
+ *
+ *  If \c datasize is not NULL, it is filled with the size of the data read.
+ *
+ *  If \c freesrc is non-zero, the stream will be closed after being read.
+ *
+ *  The data should be freed with SDL_free().
+ *
+ *  \return the data, or NULL if there was an error.
+ */
+extern DECLSPEC void *SDLCALL SDL_LoadFile_RW(SDL_RWops * src, size_t *datasize,
+                                                    int freesrc);
+
+/**
+ *  Load an entire file.
+ *
+ *  Convenience macro.
+ */
+#define SDL_LoadFile(file, datasize)   SDL_LoadFile_RW(SDL_RWFromFile(file, "rb"), datasize, 1)
+
+/**
+ *  \name Read endian functions
+ *
+ *  Read an item of the specified endianness and return in native format.
+ */
+/* @{ */
+extern DECLSPEC Uint8 SDLCALL SDL_ReadU8(SDL_RWops * src);
+extern DECLSPEC Uint16 SDLCALL SDL_ReadLE16(SDL_RWops * src);
+extern DECLSPEC Uint16 SDLCALL SDL_ReadBE16(SDL_RWops * src);
+extern DECLSPEC Uint32 SDLCALL SDL_ReadLE32(SDL_RWops * src);
+extern DECLSPEC Uint32 SDLCALL SDL_ReadBE32(SDL_RWops * src);
+extern DECLSPEC Uint64 SDLCALL SDL_ReadLE64(SDL_RWops * src);
+extern DECLSPEC Uint64 SDLCALL SDL_ReadBE64(SDL_RWops * src);
+/* @} *//* Read endian functions */
+
+/**
+ *  \name Write endian functions
+ *
+ *  Write an item of native format to the specified endianness.
+ */
+/* @{ */
+extern DECLSPEC size_t SDLCALL SDL_WriteU8(SDL_RWops * dst, Uint8 value);
+extern DECLSPEC size_t SDLCALL SDL_WriteLE16(SDL_RWops * dst, Uint16 value);
+extern DECLSPEC size_t SDLCALL SDL_WriteBE16(SDL_RWops * dst, Uint16 value);
+extern DECLSPEC size_t SDLCALL SDL_WriteLE32(SDL_RWops * dst, Uint32 value);
+extern DECLSPEC size_t SDLCALL SDL_WriteBE32(SDL_RWops * dst, Uint32 value);
+extern DECLSPEC size_t SDLCALL SDL_WriteLE64(SDL_RWops * dst, Uint64 value);
+extern DECLSPEC size_t SDLCALL SDL_WriteBE64(SDL_RWops * dst, Uint64 value);
+/* @} *//* Write endian functions */
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_rwops_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */

data/ext/alphatau/native/sdl/include/SDL_scancode.h

@@ -0,0 +1,413 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2018 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_scancode.h
+ *
+ *  Defines keyboard scancodes.
+ */
+
+#ifndef SDL_scancode_h_
+#define SDL_scancode_h_
+
+#include "SDL_stdinc.h"
+
+/**
+ *  \brief The SDL keyboard scancode representation.
+ *
+ *  Values of this type are used to represent keyboard keys, among other places
+ *  in the \link SDL_Keysym::scancode key.keysym.scancode \endlink field of the
+ *  SDL_Event structure.
+ *
+ *  The values in this enumeration are based on the USB usage page standard:
+ *  http://www.usb.org/developers/hidpage/Hut1_12v2.pdf
+ */
+typedef enum
+{
+    SDL_SCANCODE_UNKNOWN = 0,
+
+    /**
+     *  \name Usage page 0x07
+     *
+     *  These values are from usage page 0x07 (USB keyboard page).
+     */
+    /* @{ */
+
+    SDL_SCANCODE_A = 4,
+    SDL_SCANCODE_B = 5,
+    SDL_SCANCODE_C = 6,
+    SDL_SCANCODE_D = 7,
+    SDL_SCANCODE_E = 8,
+    SDL_SCANCODE_F = 9,
+    SDL_SCANCODE_G = 10,
+    SDL_SCANCODE_H = 11,
+    SDL_SCANCODE_I = 12,
+    SDL_SCANCODE_J = 13,
+    SDL_SCANCODE_K = 14,
+    SDL_SCANCODE_L = 15,
+    SDL_SCANCODE_M = 16,
+    SDL_SCANCODE_N = 17,
+    SDL_SCANCODE_O = 18,
+    SDL_SCANCODE_P = 19,
+    SDL_SCANCODE_Q = 20,
+    SDL_SCANCODE_R = 21,
+    SDL_SCANCODE_S = 22,
+    SDL_SCANCODE_T = 23,
+    SDL_SCANCODE_U = 24,
+    SDL_SCANCODE_V = 25,
+    SDL_SCANCODE_W = 26,
+    SDL_SCANCODE_X = 27,
+    SDL_SCANCODE_Y = 28,
+    SDL_SCANCODE_Z = 29,
+
+    SDL_SCANCODE_1 = 30,
+    SDL_SCANCODE_2 = 31,
+    SDL_SCANCODE_3 = 32,
+    SDL_SCANCODE_4 = 33,
+    SDL_SCANCODE_5 = 34,
+    SDL_SCANCODE_6 = 35,
+    SDL_SCANCODE_7 = 36,
+    SDL_SCANCODE_8 = 37,
+    SDL_SCANCODE_9 = 38,
+    SDL_SCANCODE_0 = 39,
+
+    SDL_SCANCODE_RETURN = 40,
+    SDL_SCANCODE_ESCAPE = 41,
+    SDL_SCANCODE_BACKSPACE = 42,
+    SDL_SCANCODE_TAB = 43,
+    SDL_SCANCODE_SPACE = 44,
+
+    SDL_SCANCODE_MINUS = 45,
+    SDL_SCANCODE_EQUALS = 46,
+    SDL_SCANCODE_LEFTBRACKET = 47,
+    SDL_SCANCODE_RIGHTBRACKET = 48,
+    SDL_SCANCODE_BACKSLASH = 49, /**< Located at the lower left of the return
+                                  *   key on ISO keyboards and at the right end
+                                  *   of the QWERTY row on ANSI keyboards.
+                                  *   Produces REVERSE SOLIDUS (backslash) and
+                                  *   VERTICAL LINE in a US layout, REVERSE
+                                  *   SOLIDUS and VERTICAL LINE in a UK Mac
+                                  *   layout, NUMBER SIGN and TILDE in a UK
+                                  *   Windows layout, DOLLAR SIGN and POUND SIGN
+                                  *   in a Swiss German layout, NUMBER SIGN and
+                                  *   APOSTROPHE in a German layout, GRAVE
+                                  *   ACCENT and POUND SIGN in a French Mac
+                                  *   layout, and ASTERISK and MICRO SIGN in a
+                                  *   French Windows layout.
+                                  */
+    SDL_SCANCODE_NONUSHASH = 50, /**< ISO USB keyboards actually use this code
+                                  *   instead of 49 for the same key, but all
+                                  *   OSes I've seen treat the two codes
+                                  *   identically. So, as an implementor, unless
+                                  *   your keyboard generates both of those
+                                  *   codes and your OS treats them differently,
+                                  *   you should generate SDL_SCANCODE_BACKSLASH
+                                  *   instead of this code. As a user, you
+                                  *   should not rely on this code because SDL
+                                  *   will never generate it with most (all?)
+                                  *   keyboards.
+                                  */
+    SDL_SCANCODE_SEMICOLON = 51,
+    SDL_SCANCODE_APOSTROPHE = 52,
+    SDL_SCANCODE_GRAVE = 53, /**< Located in the top left corner (on both ANSI
+                              *   and ISO keyboards). Produces GRAVE ACCENT and
+                              *   TILDE in a US Windows layout and in US and UK
+                              *   Mac layouts on ANSI keyboards, GRAVE ACCENT
+                              *   and NOT SIGN in a UK Windows layout, SECTION
+                              *   SIGN and PLUS-MINUS SIGN in US and UK Mac
+                              *   layouts on ISO keyboards, SECTION SIGN and
+                              *   DEGREE SIGN in a Swiss German layout (Mac:
+                              *   only on ISO keyboards), CIRCUMFLEX ACCENT and
+                              *   DEGREE SIGN in a German layout (Mac: only on
+                              *   ISO keyboards), SUPERSCRIPT TWO and TILDE in a
+                              *   French Windows layout, COMMERCIAL AT and
+                              *   NUMBER SIGN in a French Mac layout on ISO
+                              *   keyboards, and LESS-THAN SIGN and GREATER-THAN
+                              *   SIGN in a Swiss German, German, or French Mac
+                              *   layout on ANSI keyboards.
+                              */
+    SDL_SCANCODE_COMMA = 54,
+    SDL_SCANCODE_PERIOD = 55,
+    SDL_SCANCODE_SLASH = 56,
+
+    SDL_SCANCODE_CAPSLOCK = 57,
+
+    SDL_SCANCODE_F1 = 58,
+    SDL_SCANCODE_F2 = 59,
+    SDL_SCANCODE_F3 = 60,
+    SDL_SCANCODE_F4 = 61,
+    SDL_SCANCODE_F5 = 62,
+    SDL_SCANCODE_F6 = 63,
+    SDL_SCANCODE_F7 = 64,
+    SDL_SCANCODE_F8 = 65,
+    SDL_SCANCODE_F9 = 66,
+    SDL_SCANCODE_F10 = 67,
+    SDL_SCANCODE_F11 = 68,
+    SDL_SCANCODE_F12 = 69,
+
+    SDL_SCANCODE_PRINTSCREEN = 70,
+    SDL_SCANCODE_SCROLLLOCK = 71,
+    SDL_SCANCODE_PAUSE = 72,
+    SDL_SCANCODE_INSERT = 73, /**< insert on PC, help on some Mac keyboards (but
+                                   does send code 73, not 117) */
+    SDL_SCANCODE_HOME = 74,
+    SDL_SCANCODE_PAGEUP = 75,
+    SDL_SCANCODE_DELETE = 76,
+    SDL_SCANCODE_END = 77,
+    SDL_SCANCODE_PAGEDOWN = 78,
+    SDL_SCANCODE_RIGHT = 79,
+    SDL_SCANCODE_LEFT = 80,
+    SDL_SCANCODE_DOWN = 81,
+    SDL_SCANCODE_UP = 82,
+
+    SDL_SCANCODE_NUMLOCKCLEAR = 83, /**< num lock on PC, clear on Mac keyboards
+                                     */
+    SDL_SCANCODE_KP_DIVIDE = 84,
+    SDL_SCANCODE_KP_MULTIPLY = 85,
+    SDL_SCANCODE_KP_MINUS = 86,
+    SDL_SCANCODE_KP_PLUS = 87,
+    SDL_SCANCODE_KP_ENTER = 88,
+    SDL_SCANCODE_KP_1 = 89,
+    SDL_SCANCODE_KP_2 = 90,
+    SDL_SCANCODE_KP_3 = 91,
+    SDL_SCANCODE_KP_4 = 92,
+    SDL_SCANCODE_KP_5 = 93,
+    SDL_SCANCODE_KP_6 = 94,
+    SDL_SCANCODE_KP_7 = 95,
+    SDL_SCANCODE_KP_8 = 96,
+    SDL_SCANCODE_KP_9 = 97,
+    SDL_SCANCODE_KP_0 = 98,
+    SDL_SCANCODE_KP_PERIOD = 99,
+
+    SDL_SCANCODE_NONUSBACKSLASH = 100, /**< This is the additional key that ISO
+                                        *   keyboards have over ANSI ones,
+                                        *   located between left shift and Y.
+                                        *   Produces GRAVE ACCENT and TILDE in a
+                                        *   US or UK Mac layout, REVERSE SOLIDUS
+                                        *   (backslash) and VERTICAL LINE in a
+                                        *   US or UK Windows layout, and
+                                        *   LESS-THAN SIGN and GREATER-THAN SIGN
+                                        *   in a Swiss German, German, or French
+                                        *   layout. */
+    SDL_SCANCODE_APPLICATION = 101, /**< windows contextual menu, compose */
+    SDL_SCANCODE_POWER = 102, /**< The USB document says this is a status flag,
+                               *   not a physical key - but some Mac keyboards
+                               *   do have a power key. */
+    SDL_SCANCODE_KP_EQUALS = 103,
+    SDL_SCANCODE_F13 = 104,
+    SDL_SCANCODE_F14 = 105,
+    SDL_SCANCODE_F15 = 106,
+    SDL_SCANCODE_F16 = 107,
+    SDL_SCANCODE_F17 = 108,
+    SDL_SCANCODE_F18 = 109,
+    SDL_SCANCODE_F19 = 110,
+    SDL_SCANCODE_F20 = 111,
+    SDL_SCANCODE_F21 = 112,
+    SDL_SCANCODE_F22 = 113,
+    SDL_SCANCODE_F23 = 114,
+    SDL_SCANCODE_F24 = 115,
+    SDL_SCANCODE_EXECUTE = 116,
+    SDL_SCANCODE_HELP = 117,
+    SDL_SCANCODE_MENU = 118,
+    SDL_SCANCODE_SELECT = 119,
+    SDL_SCANCODE_STOP = 120,
+    SDL_SCANCODE_AGAIN = 121,   /**< redo */
+    SDL_SCANCODE_UNDO = 122,
+    SDL_SCANCODE_CUT = 123,
+    SDL_SCANCODE_COPY = 124,
+    SDL_SCANCODE_PASTE = 125,
+    SDL_SCANCODE_FIND = 126,
+    SDL_SCANCODE_MUTE = 127,
+    SDL_SCANCODE_VOLUMEUP = 128,
+    SDL_SCANCODE_VOLUMEDOWN = 129,
+/* not sure whether there's a reason to enable these */
+/*     SDL_SCANCODE_LOCKINGCAPSLOCK = 130,  */
+/*     SDL_SCANCODE_LOCKINGNUMLOCK = 131, */
+/*     SDL_SCANCODE_LOCKINGSCROLLLOCK = 132, */
+    SDL_SCANCODE_KP_COMMA = 133,
+    SDL_SCANCODE_KP_EQUALSAS400 = 134,
+
+    SDL_SCANCODE_INTERNATIONAL1 = 135, /**< used on Asian keyboards, see
+                                            footnotes in USB doc */
+    SDL_SCANCODE_INTERNATIONAL2 = 136,
+    SDL_SCANCODE_INTERNATIONAL3 = 137, /**< Yen */
+    SDL_SCANCODE_INTERNATIONAL4 = 138,
+    SDL_SCANCODE_INTERNATIONAL5 = 139,
+    SDL_SCANCODE_INTERNATIONAL6 = 140,
+    SDL_SCANCODE_INTERNATIONAL7 = 141,
+    SDL_SCANCODE_INTERNATIONAL8 = 142,
+    SDL_SCANCODE_INTERNATIONAL9 = 143,
+    SDL_SCANCODE_LANG1 = 144, /**< Hangul/English toggle */
+    SDL_SCANCODE_LANG2 = 145, /**< Hanja conversion */
+    SDL_SCANCODE_LANG3 = 146, /**< Katakana */
+    SDL_SCANCODE_LANG4 = 147, /**< Hiragana */
+    SDL_SCANCODE_LANG5 = 148, /**< Zenkaku/Hankaku */
+    SDL_SCANCODE_LANG6 = 149, /**< reserved */
+    SDL_SCANCODE_LANG7 = 150, /**< reserved */
+    SDL_SCANCODE_LANG8 = 151, /**< reserved */
+    SDL_SCANCODE_LANG9 = 152, /**< reserved */
+
+    SDL_SCANCODE_ALTERASE = 153, /**< Erase-Eaze */
+    SDL_SCANCODE_SYSREQ = 154,
+    SDL_SCANCODE_CANCEL = 155,
+    SDL_SCANCODE_CLEAR = 156,
+    SDL_SCANCODE_PRIOR = 157,
+    SDL_SCANCODE_RETURN2 = 158,
+    SDL_SCANCODE_SEPARATOR = 159,
+    SDL_SCANCODE_OUT = 160,
+    SDL_SCANCODE_OPER = 161,
+    SDL_SCANCODE_CLEARAGAIN = 162,
+    SDL_SCANCODE_CRSEL = 163,
+    SDL_SCANCODE_EXSEL = 164,
+
+    SDL_SCANCODE_KP_00 = 176,
+    SDL_SCANCODE_KP_000 = 177,
+    SDL_SCANCODE_THOUSANDSSEPARATOR = 178,
+    SDL_SCANCODE_DECIMALSEPARATOR = 179,
+    SDL_SCANCODE_CURRENCYUNIT = 180,
+    SDL_SCANCODE_CURRENCYSUBUNIT = 181,
+    SDL_SCANCODE_KP_LEFTPAREN = 182,
+    SDL_SCANCODE_KP_RIGHTPAREN = 183,
+    SDL_SCANCODE_KP_LEFTBRACE = 184,
+    SDL_SCANCODE_KP_RIGHTBRACE = 185,
+    SDL_SCANCODE_KP_TAB = 186,
+    SDL_SCANCODE_KP_BACKSPACE = 187,
+    SDL_SCANCODE_KP_A = 188,
+    SDL_SCANCODE_KP_B = 189,
+    SDL_SCANCODE_KP_C = 190,
+    SDL_SCANCODE_KP_D = 191,
+    SDL_SCANCODE_KP_E = 192,
+    SDL_SCANCODE_KP_F = 193,
+    SDL_SCANCODE_KP_XOR = 194,
+    SDL_SCANCODE_KP_POWER = 195,
+    SDL_SCANCODE_KP_PERCENT = 196,
+    SDL_SCANCODE_KP_LESS = 197,
+    SDL_SCANCODE_KP_GREATER = 198,
+    SDL_SCANCODE_KP_AMPERSAND = 199,
+    SDL_SCANCODE_KP_DBLAMPERSAND = 200,
+    SDL_SCANCODE_KP_VERTICALBAR = 201,
+    SDL_SCANCODE_KP_DBLVERTICALBAR = 202,
+    SDL_SCANCODE_KP_COLON = 203,
+    SDL_SCANCODE_KP_HASH = 204,
+    SDL_SCANCODE_KP_SPACE = 205,
+    SDL_SCANCODE_KP_AT = 206,
+    SDL_SCANCODE_KP_EXCLAM = 207,
+    SDL_SCANCODE_KP_MEMSTORE = 208,
+    SDL_SCANCODE_KP_MEMRECALL = 209,
+    SDL_SCANCODE_KP_MEMCLEAR = 210,
+    SDL_SCANCODE_KP_MEMADD = 211,
+    SDL_SCANCODE_KP_MEMSUBTRACT = 212,
+    SDL_SCANCODE_KP_MEMMULTIPLY = 213,
+    SDL_SCANCODE_KP_MEMDIVIDE = 214,
+    SDL_SCANCODE_KP_PLUSMINUS = 215,
+    SDL_SCANCODE_KP_CLEAR = 216,
+    SDL_SCANCODE_KP_CLEARENTRY = 217,
+    SDL_SCANCODE_KP_BINARY = 218,
+    SDL_SCANCODE_KP_OCTAL = 219,
+    SDL_SCANCODE_KP_DECIMAL = 220,
+    SDL_SCANCODE_KP_HEXADECIMAL = 221,
+
+    SDL_SCANCODE_LCTRL = 224,
+    SDL_SCANCODE_LSHIFT = 225,
+    SDL_SCANCODE_LALT = 226, /**< alt, option */
+    SDL_SCANCODE_LGUI = 227, /**< windows, command (apple), meta */
+    SDL_SCANCODE_RCTRL = 228,
+    SDL_SCANCODE_RSHIFT = 229,
+    SDL_SCANCODE_RALT = 230, /**< alt gr, option */
+    SDL_SCANCODE_RGUI = 231, /**< windows, command (apple), meta */
+
+    SDL_SCANCODE_MODE = 257,    /**< I'm not sure if this is really not covered
+                                 *   by any of the above, but since there's a
+                                 *   special KMOD_MODE for it I'm adding it here
+                                 */
+
+    /* @} *//* Usage page 0x07 */
+
+    /**
+     *  \name Usage page 0x0C
+     *
+     *  These values are mapped from usage page 0x0C (USB consumer page).
+     */
+    /* @{ */
+
+    SDL_SCANCODE_AUDIONEXT = 258,
+    SDL_SCANCODE_AUDIOPREV = 259,
+    SDL_SCANCODE_AUDIOSTOP = 260,
+    SDL_SCANCODE_AUDIOPLAY = 261,
+    SDL_SCANCODE_AUDIOMUTE = 262,
+    SDL_SCANCODE_MEDIASELECT = 263,
+    SDL_SCANCODE_WWW = 264,
+    SDL_SCANCODE_MAIL = 265,
+    SDL_SCANCODE_CALCULATOR = 266,
+    SDL_SCANCODE_COMPUTER = 267,
+    SDL_SCANCODE_AC_SEARCH = 268,
+    SDL_SCANCODE_AC_HOME = 269,
+    SDL_SCANCODE_AC_BACK = 270,
+    SDL_SCANCODE_AC_FORWARD = 271,
+    SDL_SCANCODE_AC_STOP = 272,
+    SDL_SCANCODE_AC_REFRESH = 273,
+    SDL_SCANCODE_AC_BOOKMARKS = 274,
+
+    /* @} *//* Usage page 0x0C */
+
+    /**
+     *  \name Walther keys
+     *
+     *  These are values that Christian Walther added (for mac keyboard?).
+     */
+    /* @{ */
+
+    SDL_SCANCODE_BRIGHTNESSDOWN = 275,
+    SDL_SCANCODE_BRIGHTNESSUP = 276,
+    SDL_SCANCODE_DISPLAYSWITCH = 277, /**< display mirroring/dual display
+                                           switch, video mode switch */
+    SDL_SCANCODE_KBDILLUMTOGGLE = 278,
+    SDL_SCANCODE_KBDILLUMDOWN = 279,
+    SDL_SCANCODE_KBDILLUMUP = 280,
+    SDL_SCANCODE_EJECT = 281,
+    SDL_SCANCODE_SLEEP = 282,
+
+    SDL_SCANCODE_APP1 = 283,
+    SDL_SCANCODE_APP2 = 284,
+
+    /* @} *//* Walther keys */
+
+    /**
+     *  \name Usage page 0x0C (additional media keys)
+     *
+     *  These values are mapped from usage page 0x0C (USB consumer page).
+     */
+    /* @{ */
+
+    SDL_SCANCODE_AUDIOREWIND = 285,
+    SDL_SCANCODE_AUDIOFASTFORWARD = 286,
+
+    /* @} *//* Usage page 0x0C (additional media keys) */
+
+    /* Add any other keys here. */
+
+    SDL_NUM_SCANCODES = 512 /**< not a key, just marks the number of scancodes
+                                 for array bounds */
+} SDL_Scancode;
+
+#endif /* SDL_scancode_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */