osdu-python-models 0.5.0__py3-none-any.whl

osdu_models/masterdata/survey_program/v1_0_0.py

@@ -0,0 +1,104 @@
+# generated by datamodel-codegen:
+#   filename:  masterdata/survey_program/v1_0_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_master.v1_0_0 import AbstractMaster
+from ...abstract.abstract_project.v1_0_0 import AbstractProject
+
+
+class SurveySection(BaseModel):
+    """
+    Description of the Survey Section Component
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Sequence: float = Field(..., title='Sequence')
+    """
+    Order in which program sections will be executed / were executed.
+    """
+    Name: str | None = Field(None, title='Name')
+    """
+    Name of survey program section.
+    """
+    StartMeasuredDepth: float | None = Field(None, title='Start MD')
+    """
+    Hole measured depth at which the survey run will begin/began. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    EndMeasuredDepth: float | None = Field(None, title='End MD')
+    """
+    Hole measured depth at which the survey run will end/ended. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    SurveyCompanyID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Organisation:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(None, title='Survey Company ID')
+    """
+    Company who will run / has run survey tool.
+    """
+    SurveyToolName: str | None = Field(None, title='Survey Tool Name')
+    """
+    Name of survey tool, as defined by the manufacturer, to be used / used for this section.
+    """
+    SurveyToolTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-SurveyToolType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Survey Tool Type ID')
+    """
+    Standardized Type of tool used.
+    """
+    ErrorModel: str | None = Field(None, title='Error Model')
+    """
+    Error model used to calculate ellipses of uncertainty.
+    """
+    IsOverwrite: bool | None = Field(None, title='Is Overwrite')
+    """
+    Normally true, higher index trajectory takes precedence over overlapping section of previous trajectory.  Values are "true" (or "1") and "false" (or "0").
+    """
+    FrequencyMx: float | None = Field(None, title='Frequency Maximum')
+    """
+    Maximum allowable depth frequency for survey stations for this survey run.
+    """
+    SurveySectionExistenceKind: str = Field(
+        ...,
+        examples=['Actual; Model ; Plan ; Unknown'],
+        title='Survey Section Existence Kind',
+    )
+    """
+    The item state for the data object.
+    """
+    Comments: str | None = Field(None, title='Comments')
+    """
+    Comments and remarks.
+    """
+
+
+class Data(OsduCommonResources, AbstractMaster, AbstractProject):
+    """
+    `data` payload for SurveyProgram 1.0.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: constr(
+        pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Wellbore ID')
+    """
+    Reference to the Wellbore
+    """
+    Engineer: str | None = Field(None, title='Engineer')
+    """
+    Name of engineer.
+    """
+    SurveySections: list[SurveySection] = Field(..., title='Survey Section')
+    """
+    Survey section object.
+    """
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/masterdata/survey_program/v1_1_0.py

@@ -0,0 +1,130 @@
+# generated by datamodel-codegen:
+#   filename:  masterdata/survey_program/v1_1_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_master.v1_1_0 import AbstractMaster
+from ...abstract.abstract_project.v1_0_0 import AbstractProject
+
+
+class SurveySection(BaseModel):
+    """
+    Description of the Survey Section Component
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:master-data--Wellbore:11000091175501:'],
+        title='Wellbore ID',
+    )
+    """
+    Parent Wellbore Identifier.
+    """
+    WellboreTrajectoryID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-WellboreTrajectory:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--WellboreTrajectory:0362ff79-26c2-440f-98a7-7aad2305022b:'
+        ],
+        title='Wellbore Trajectory ID',
+    )
+    """
+    ID of the WellboreTrajectory that the Survey Program is associated to, e.g., for compiling a Definitive Survey from Parts.
+    """
+    Sequence: float = Field(..., title='Sequence')
+    """
+    Order in which program sections will be executed / were executed.
+    """
+    Name: str | None = Field(None, title='Name')
+    """
+    Name of survey program section.
+    """
+    StartMeasuredDepth: float | None = Field(None, title='Start MD')
+    """
+    Hole measured depth at which the survey run will begin/began. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    EndMeasuredDepth: float | None = Field(None, title='End MD')
+    """
+    Hole measured depth at which the survey run will end/ended. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    SurveyCompanyID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Organisation:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(None, title='Survey Company ID')
+    """
+    Company who will run / has run survey tool.
+    """
+    SurveyToolName: str | None = Field(None, title='Survey Tool Name')
+    """
+    Name of survey tool, as defined by the manufacturer, to be used / used for this section.
+    """
+    SurveyToolTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-SurveyToolType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Survey Tool Type ID')
+    """
+    Standardized Type of tool used.
+    """
+    ErrorModel: str | None = Field(None, title='Error Model')
+    """
+    Error model used to calculate ellipses of uncertainty.
+    """
+    IsOverwrite: bool | None = Field(None, title='Is Overwrite')
+    """
+    Normally true, higher index trajectory takes precedence over overlapping section of previous trajectory.  Values are "true" (or "1") and "false" (or "0").
+    """
+    FrequencyMx: float | None = Field(None, title='Frequency Maximum')
+    """
+    Maximum allowable depth frequency for survey stations for this survey run.
+    """
+    SurveySectionExistenceKind: str = Field(
+        ...,
+        examples=['Actual; Model ; Plan ; Unknown'],
+        title='Survey Section Existence Kind',
+    )
+    """
+    The item state for the data object.
+    """
+    Comments: str | None = Field(None, title='Comments')
+    """
+    Comments and remarks.
+    """
+
+
+class Data(OsduCommonResources, AbstractMaster, AbstractProject):
+    """
+    `data` payload for SurveyProgram 1.1.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: constr(
+        pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Wellbore ID')
+    """
+    Reference to the Wellbore
+    """
+    Engineer: str | None = Field(None, title='Engineer')
+    """
+    Name of engineer.
+    """
+    SurveySections: list[SurveySection] = Field(..., title='Survey Section')
+    """
+    Survey section object.
+    """
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/masterdata/survey_program/v1_2_0.py

@@ -0,0 +1,137 @@
+# generated by datamodel-codegen:
+#   filename:  masterdata/survey_program/v1_2_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_master.v1_2_0 import AbstractMaster
+from ...abstract.abstract_project.v1_0_0 import AbstractProject
+
+
+class SurveySection(BaseModel):
+    """
+    Description of the Survey Section Component
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:master-data--Wellbore:11000091175501:'],
+        title='Wellbore ID',
+    )
+    """
+    Parent Wellbore Identifier.
+    """
+    WellboreTrajectoryID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-WellboreTrajectory:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--WellboreTrajectory:0362ff79-26c2-440f-98a7-7aad2305022b:'
+        ],
+        title='Wellbore Trajectory ID',
+    )
+    """
+    ID of the WellboreTrajectory that the Survey Program is associated to, e.g., for compiling a Definitive Survey from Parts.
+    """
+    Sequence: float = Field(..., title='Sequence')
+    """
+    Order in which program sections will be executed / were executed.
+    """
+    Name: str | None = Field(None, title='Name')
+    """
+    Name of survey program section.
+    """
+    StartMeasuredDepth: float | None = Field(None, title='Start MD')
+    """
+    Hole measured depth at which the survey run will begin/began. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    EndMeasuredDepth: float | None = Field(None, title='End MD')
+    """
+    Hole measured depth at which the survey run will end/ended. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    SurveyCompanyID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Organisation:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(None, title='Survey Company ID')
+    """
+    Company who will run / has run survey tool.
+    """
+    SurveyToolName: str | None = Field(None, title='Survey Tool Name')
+    """
+    Name of survey tool, as defined by the manufacturer, to be used / used for this section.
+    """
+    SurveyToolTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-SurveyToolType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Survey Tool Type ID')
+    """
+    Standardized Type of tool used.
+    """
+    ErrorModel: str | None = Field(None, title='Error Model')
+    """
+    Error model used to calculate ellipses of uncertainty.
+    """
+    IsOverwrite: bool | None = Field(None, title='Is Overwrite')
+    """
+    Normally true, higher index trajectory takes precedence over overlapping section of previous trajectory.  Values are "true" (or "1") and "false" (or "0").
+    """
+    FrequencyMx: float | None = Field(None, title='Frequency Maximum')
+    """
+    Maximum allowable depth frequency for survey stations for this survey run.
+    """
+    SurveySectionExistenceKind: str = Field(
+        ...,
+        examples=['Actual; Model ; Plan ; Unknown'],
+        title='Survey Section Existence Kind',
+    )
+    """
+    The item state for the data object.
+    """
+    Comments: str | None = Field(None, title='Comments')
+    """
+    Comments and remarks.
+    """
+
+
+class Data(OsduCommonResources, AbstractMaster, AbstractProject):
+    """
+    `data` payload for SurveyProgram 1.2.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: constr(
+        pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Wellbore ID')
+    """
+    Reference to the Wellbore
+    """
+    Engineer: str | None = Field(None, title='Engineer')
+    """
+    Name of engineer.
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement | None = Field(
+        None, title='Vertical Measurement'
+    )
+    """
+    References an entry in the VerticalMeasurements array of the Rig, Well or Wellbore identified by VerticalReferenceEntityID or a standalone vertical reference which defines the vertical reference datum for all measured depths of the SurveyProgram record. For planned SurveyPrograms, this property may be absent; then depths are relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    SurveySections: list[SurveySection] = Field(..., title='Survey Section')
+    """
+    Survey section object.
+    """
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/masterdata/tubular_assembly/__init__.py

@@ -0,0 +1,2 @@
+# generated by datamodel-codegen:
+#   filename:  tmp4rfivwe4

osdu_models/masterdata/tubular_assembly/v2_0_0.py

@@ -0,0 +1,286 @@
+# generated by datamodel-codegen:
+#   filename:  masterdata/tubular_assembly/v2_0_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_master.v1_2_0 import AbstractMaster
+
+
+class TubularAssemblyStatus(BaseModel):
+    """
+    Reflects the current status of the Assembly - as 'installed', 'pulled', 'planned',... - Applicable to tubing/completions as opposed to drillstrings. Historical states are recorded in TubularAssemblyStates.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    StatusTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-TubularAssemblyStatusType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:reference-data--TubularAssemblyStatusType:Installed:'],
+        title='Status Type ID',
+    )
+    """
+    The relationship to the  reference value status type.
+    """
+    Description: str | None = Field(
+        None, examples=['7" RIH to 6450m to isolated Zone A.'], title='Description'
+    )
+    """
+    Used to describe the reason of Activity - such as installed, cut/pull, pulling.
+    """
+    Date: str | None = Field(None, examples=['2022-07-29T10:00:00.000Z'], title='Date')
+    """
+    Date the status has been established.
+    """
+
+
+class TubularAssemblyState(BaseModel):
+    """
+    Record that reflects the status of the Assembly - as 'installed', 'pulled', 'planned',... - Applicable to casing, tubing/completions as opposed to drillstrings
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    StatusTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-TubularAssemblyStatusType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:reference-data--TubularAssemblyStatusType:Installed:'],
+        title='Status Type ID',
+    )
+    """
+    The relationship to the  reference value status type.
+    """
+    Description: str | None = Field(
+        None, examples=['7" RIH to 6450m to isolated Zone A.'], title='Description'
+    )
+    """
+    Used to describe the reason of Activity - such as installed, cut/pull, pulling.
+    """
+    Date: str | None = Field(None, examples=['2022-07-29T10:00:00.000Z'], title='Date')
+    """
+    Date the status has been established.
+    """
+
+
+class Data(OsduCommonResources, AbstractMaster):
+    """
+    `data` payload for TubularAssembly 2.0.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Name: str | None = Field(None, examples=['7" Production Casing'], title='Name')
+    """
+    The name of the Tubular Assembly.
+    """
+    ParentWellboreID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:master-data--Wellbore:11000091175501:'],
+        title='Parent Wellbore ID',
+    )
+    """
+    Identifier of the Wellbore the Assembly is installed into or run in.
+    """
+    ParentAssemblyID: (
+        constr(
+            pattern=r'^[\w\-\.]+:master-data\-\-TubularAssembly:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:master-data--TubularAssembly:11000091175501.9_58Int:'],
+        title='Parent Assembly ID',
+    )
+    """
+    Optional - Identifier of the parent assembly (in case of side-track, multi-nesting,…) - The Concentric Tubular model is used to identify the Assembly that an Assembly sits inside e.g. Surface Casing set inside Conductor, Tubing set inside Production Casing, a Bumper Spring set inside a Production Tubing Profile Nipple, Liner set inside Casing, etc. This is needed to enable a Digital Well Sketch application to understand relationships between Assemblies and their parent Wellbores.
+    """
+    TubularAssemblyStatus_1: TubularAssemblyStatus | None = Field(
+        None, alias='TubularAssemblyStatus', title='TubularAssemblyStatus'
+    )
+    """
+    Reflects the current status of the Assembly - as 'installed', 'pulled', 'planned',... - Applicable to tubing/completions as opposed to drillstrings. Historical states are recorded in TubularAssemblyStates.
+    """
+    TubularAssemblyStates: list[TubularAssemblyState] | None = Field(
+        None, title='Tubular Assembly States'
+    )
+    """
+    The full record of historical and current states of the Assembly. The current active state is recorded in TubularAssemblyStatus.
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement | None = Field(
+        None, title='Vertical Measurement'
+    )
+    """
+    Either a self-contained vertical reference for the depths in this TubularAssembly or a reference (VerticalReferenceID) to an element in data.VerticalMeasurements[] in the entity defined by VerticalReferenceEntityID e.g. the parent Well.
+    """
+    SuspensionPointMD: float | None = Field(
+        None, examples=['4950 m'], title='Suspension Point MD'
+    )
+    """
+    The Measured Depth that the assembly is suspended from. This  'point' is typically the Measured Depth of the top of the assembly e.g. Hanger though with PBRs the Suspension Point may not be the top.
+    """
+    TubularAssemblyNumber: int | None = Field(
+        None, examples=[3], title='Tubular Assembly Number'
+    )
+    """
+    Sequence of the TubularAssembly (Typically BHA sequence)
+    """
+    TubularAssemblyTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-TubularAssemblyType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:reference-data--TubularAssemblyType:ProductionCasing:'],
+        title='Tubular Assembly Type ID',
+    )
+    """
+    Type of tubular assembly.
+    """
+    StringClassID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-StringClass:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:reference-data--StringClass:Production:'],
+        title='String Class ID',
+    )
+    """
+    Descriptor for Assembly, e.g. Production, Surface, Conductor, Intermediate, Drilling
+    """
+    ActivityTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-TubularAssemblyActivityType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:reference-data--TubularAssemblyActivityType:RunTubular:'],
+        title='Activity Type ID',
+    )
+    """
+    Used to describe if it belongs to a RunActivity or to a PullActivity
+    """
+    ActivityTypeReasonDescription: str | None = Field(
+        None,
+        examples=['Isolate 8-1/2" Hole Section'],
+        title='Activity Type Reason Description',
+    )
+    """
+    Used to describe the reason of Activity - such as cut/pull, pulling,…
+    """
+    ArtificialLiftTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-ArtificialLiftType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Artificial Lift Type ID')
+    """
+    Type of Artificial Lift supported by the TubularAssembly where applicable E.g. could be "Surface Pump" / "Submersible Pump" / "Gas Lift", etc
+    """
+    LinerTypeID: (
+        constr(pattern=r'^[\w\-\.]+:reference-data\-\-LinerType:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(None, title='Liner Type ID')
+    """
+    This reference table describes the type of liner used in the borehole where applicable. For example, slotted, gravel packed or pre-perforated etc.
+    """
+    IsMixedString: bool | None = Field(None, examples=[True], title='Is Mixed String')
+    """
+    True if the assembly is a mixed string, else false. True where the Tubular Assembly is made up of joints with different Diameters, Weights, Grades, Connection, Tensile Strengths, Collapse Resistance or  Yield Strengths.
+    """
+    IsInstalled: bool | None = Field(None, examples=[True], title='Is Installed')
+    """
+    Indicates if the Tubular Assembly is currently downhole.
+    """
+    TubularDirectionID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-TubularDirection:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:reference-data--TubularDirection:TopToBottom:'],
+        title='Tubular Direction ID',
+    )
+    """
+    Defines whether the sequence of child tubular components runs either top to bottom, or bottom to top.
+    """
+    TubularAssemblyNominalSize: float | None = Field(
+        None, examples=['7 in'], title='Tubular Assembly Nominal Size'
+    )
+    """
+    Nominal size (diameter) describing the whole assembly, e.g. 9.625", 12.25
+    """
+    TubularAssemblyTotalLength: float | None = Field(
+        None, examples=['1500 m'], title='Tubular Assembly Total Length'
+    )
+    """
+    Total Length of the whole assembly.
+    """
+    DriftDiameter: float | None = Field(
+        None, examples=['6.2 in'], title='DriftDiameter'
+    )
+    """
+    The drift diameter is the inside diameter (ID) that the pipe manufacturer guarantees per specifications. The drift diameter is used by the well planner to determine what size tools or casing strings can later be run through the casing, whereas the nominal inside diameter is used for fluid volume calculations such as mud circulating times and cement slurry placement calculations. Note that the nominal inside diameter is not the same as the drift diameter but is always slightly larger.
+    """
+    MinimumInnerDiameter: float | None = Field(
+        None, examples=['6.125 in'], title='Minimum Inner Diameter'
+    )
+    """
+    This is the minimum inner diameter of the whole Tubular Assembly.
+    """
+    PilotHoleSize: float | None = Field(None, title='Pilot Hole Size')
+    """
+    Diameter of the Pilot Hole (drillstrings)
+    """
+    SeaFloorPenetrationLength: float | None = Field(
+        None, title='Sea Floor Penetration Length'
+    )
+    """
+    The distance that the Tubular Assembly has penetrated below the surface of the sea floor.
+    """
+    AssemblyTopMD: float | None = Field(
+        None, examples=['4950 m'], title='Assembly Top MD'
+    )
+    """
+    The measured depth at the top of the Tubular Assembly
+    """
+    AssemblyBaseMD: float | None = Field(
+        None, examples=['6450 m'], title='Assembly Base MD'
+    )
+    """
+    The measured depth at the base (bottom) of the Tubular Assembly
+    """
+    AssemblyTopReportedTVD: float | None = Field(
+        None, examples=['4800 m'], title='Assembly Top Reported TVD'
+    )
+    """
+    True Vertical Depth of the top of the Assembly
+    """
+    AssemblyBaseReportedTVD: float | None = Field(
+        None, examples=['6125 m'], title='Assembly Base Reported TVD'
+    )
+    """
+    True Vertical Depth of the base of the Assembly
+    """
+    ExtensionProperties: dict[str, Any] | None = None