osdu-python-models 0.5.0__py3-none-any.whl

osdu_models/masterdata/gravity_magnetic_acquisition_survey/v1_0_0.py

@@ -0,0 +1,271 @@
+# generated by datamodel-codegen:
+#   filename:  masterdata/gravity_magnetic_acquisition_survey/v1_0_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from ...abstract.abstract_remark import v1_0_0
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0 as v1_0_0_1
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_master.v1_2_0 import AbstractMaster
+from ...abstract.abstract_project.v1_0_0 import AbstractProject
+from ...abstract.abstract_project_activity.v1_2_0 import AbstractProjectActivity
+
+
+class AcquisitionDateRange(BaseModel):
+    """
+    Describes the start and end date range of the survey acquisition
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    StartDate: str | None = Field(None, title='StartDate')
+    """
+    The start date of the acquisition survey
+    """
+    EndDate: str | None = Field(None, title='EndDate')
+    """
+    The end date of the acquisition survey
+    """
+
+
+class FlyingHeightParameters(BaseModel):
+    """
+    Captures the average flying height and the flying height parameters such as the instrumentation, datum and the clearance method.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ClearanceMethodID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-AirborneClearanceMethod:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Clearance Method ID')
+    """
+    The airborne survey ground clearance method, for example, constant or drape.
+    """
+    MeasurementInstrumentationIDs: (
+        list[
+            constr(
+                pattern=r'^[\w\-\.]+:reference-data\-\-AirborneInstrumentation:[\w\-\.\:\%]+:[0-9]*$'
+            )
+        ]
+        | None
+    ) = Field(None, title='Measurement Instrumentation IDs')
+    """
+    The instruments or equipment used to measure the specified flying height. See AverageFlyingHeight. This can be one or several different types of equipment, for example, laser scanner, GPS, radar altimeter.
+    """
+    VerticalCoordinateReferenceSystemID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-CoordinateReferenceSystem:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Vertical Coordinate Reference System ID')
+    """
+    The relationship to the vertical CRS defining the absolute reference surface. If both the vertical and horizontal CRS are the same, then the vertical CRS should instead be captured only in the AbstractSpatialLocation.
+    """
+    ExternalTopographicalInformation: str | None = Field(
+        None, examples=['SRTM  v3'], title='External Topographical Information'
+    )
+    """
+    The topographic information utilised in this survey, for example, Shuttle Radar Topography Mission (SRTM) v3.
+    """
+    AverageFlyingHeight: float | None = Field(
+        None, examples=[200], title='Average Flying Height'
+    )
+    """
+    The average flying height for this airborne platform survey.
+    """
+
+
+class MovingPlatform(BaseModel):
+    """
+    An array that describes the survey acquisition properties relevant to a moving platform survey, for example, airborne, marine vessel or other moving vehicle
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    IsMovingPlatformSurvey: bool | None = Field(
+        None, title='Is Moving Platform Survey Flag'
+    )
+    """
+    A boolean flag indicating if the survey was acquired from a moving platform, for example, airborne, marine vessel or other moving vehicle. 
+    This boolean flag also permits a moving platform survey to be identified prior to the loading of the moving platform related properties. 
+    This should be true if any of the below moving platform properties could be populated now or in the future.
+    """
+    SamplingIntervalTime: float | None = Field(None, title='Sampling Interval Time')
+    """
+    The sampling station intervals recorded in time. Sampling intervals are often received in 1 second intervals or similar and/or p190 for marine data
+    """
+    CalculatedLineLength: float | None = Field(None, title='Calculated Line Length')
+    """
+    The total length of the line distance calculated from the line data.
+    """
+    NominalLineLength: float | None = Field(None, title='Nominal Line Length')
+    """
+    The nominal line length covered by the survey. This value is usually entered by the end user. Equivalent to the two boxes for an area.
+    """
+    PrimaryLineSpacing: float | None = Field(None, title='Primary Line Spacing')
+    """
+    The distance between primary lines. If acquired with seismic data this will be the inline.
+    """
+    TieLineSpacing: float | None = Field(None, title='Tie Line Spacing')
+    """
+    The distance between lines that intersect the primary lines. These lines are at a different azimuth to the primary lines. Typically perpendicular to the primary line.
+    """
+    FlyingHeightParameters_1: FlyingHeightParameters | None = Field(
+        None, alias='FlyingHeightParameters', title='FlyingHeightParameters'
+    )
+    """
+    Captures the average flying height and the flying height parameters such as the instrumentation, datum and the clearance method.
+    """
+    SeismicAcquisitionSurveyID: (
+        constr(
+            pattern=r'^[\w\-\.]+:master-data\-\-SeismicAcquisitionSurvey:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Seismic Acquisition Survey ID')
+    """
+    An association to a seismic acquisition survey when seismic and gravity and magnetic data are acquired simultaneously, typically in the marine environment.
+    The seismic acquisition survey object contains data relevant to the acquisition such as the survey geometry.
+    """
+    PlatformName: str | None = Field(None, title='Platform Name')
+    """
+    The free text name of the platform or the vessel that acquired the survey
+    """
+
+
+class EquipmentDetail(BaseModel):
+    """
+    The sensor, meter or tool equipment used to acquire the gravity and magnetic geophysical measurements
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Name: str | None = Field(None, title='Name')
+    """
+    A name given to a sensor, meter or tool used to acquire gravity or magnetics geophysical data. This could be a common or colloquial name. 
+    Where possible, for better search results, the manufacturer, model and serial number should be completed also.
+    """
+    Manufacturer: str | None = Field(None, title='Manufacturer')
+    """
+    The manufacturer of a sensor, meter or tool used to acquire gravity or magnetics geophysical data.
+    """
+    Model: str | None = Field(None, title='Model')
+    """
+    The model name or number, typically given by the manufacturer of a sensor, meter or tool used to acquire gravity or magnetics geophysical data.
+    """
+    SerialNumber: str | None = Field(None, title='SerialNumber')
+    """
+    The serial number, typically given by the manufacturer, of a sensor, meter or tool used to acquire gravity or magnetics geophysical data.
+    """
+    Remarks: list[v1_0_0.AbstractRemark] | None = Field(None, title='Remarks')
+    """
+    An array of remarks about the equipment used to acquire the measurements, for example, the orientation of equipment. This utilises the AbstractRemark fragment.
+    """
+
+
+class Data(
+    OsduCommonResources, AbstractMaster, AbstractProject, AbstractProjectActivity
+):
+    """
+    `data` payload for GravityMagneticAcquisitionSurvey 1.0.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    DataAcquisitionTypeIDs: (
+        list[
+            constr(
+                pattern=r'^[\w\-\.]+:reference-data\-\-GravityMagneticDataAcquisitionType:[\w\-\.\:\%]+:[0-9]*$'
+            )
+        ]
+        | None
+    ) = Field(None, title='Data Acquisition Type IDs')
+    """
+    The type of gravity and magnetics geophysical data acquired in this survey, for example, gravity, magnetic, full tensor gradiometry/airborne gravity gradiometry.
+    This could be one or several acquisition types that were acquired simultaneously in the same survey.
+    """
+    AcquisitionPlatformMethodID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-GravityMagneticAcquisitionPlatform:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Acquisition Platform Method')
+    """
+    The acquisition platform method for this survey, for example, airborne, marine, land, satellite, borehole, ocean bottom, UAV, etc.
+    """
+    OperatingEnvironmentIDs: (
+        list[
+            constr(
+                pattern=r'^[\w\-\.]+:reference-data\-\-OperatingEnvironment:[\w\-\.\:\%]+:[0-9]*$'
+            )
+        ]
+        | None
+    ) = Field(None, title='Operating EnvironmentIDs')
+    """
+    Identifies the environmental settings of the survey acquisition, for example, land, marine or transition zone. A survey can be conducted over one or more environments.
+    """
+    AreaCalculated: float | None = Field(None, title='Area Calculated')
+    """
+    The calculated area covered by the survey. This value is often calculated during the loading of the survey
+    """
+    AreaNominal: float | None = Field(None, title='Area Nominal')
+    """
+    The nominal area covered by the survey. This value is usually entered by the end user
+    """
+    AverageStationDistance: float | None = Field(None, title='Average Station Distance')
+    """
+    The average horizontal, or vertical for wellbore/borehole, distance or spacing between sampling stations in length, or a depth for a wellbore/borehole. This value can be calculated for moving platform survey from the time based sampling intervals.
+    """
+    EquipmentDetails: list[EquipmentDetail] | None = Field(
+        None, title='Equipment Details'
+    )
+    """
+    An array that describes the equipment sensors, meters or tools used to acquire the geophysical data. One or more items of equipment may be used in a survey acquisition.
+    """
+    AcquisitionDateRange_1: AcquisitionDateRange | None = Field(
+        None, alias='AcquisitionDateRange', title='Acquisition Date Range'
+    )
+    """
+    Describes the start and end date range of the survey acquisition
+    """
+    ServiceCompanyID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Organisation:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(None, title='Service CompanyID')
+    """
+    The company or organisation that acquired the survey
+    """
+    Remarks: list[v1_0_0.AbstractRemark] | None = Field(None, title='Remarks')
+    """
+    General remarks regarding the survey acquisition. An array utilising the AbstractRemark fragment
+    """
+    VerticalMeasurement: v1_0_0_1.AbstractFacilityVerticalMeasurement | None = Field(
+        None, title='Vertical Measurement'
+    )
+    """
+    The vertical measurement reference for a wellbore or borehole acquisition platform, defining the vertical reference datum, elevation and relevant depths.
+    """
+    MovingPlatform_1: MovingPlatform | None = Field(
+        None, alias='MovingPlatform', title='Moving Platform'
+    )
+    """
+    An array that describes the survey acquisition properties relevant to a moving platform survey, for example, airborne, marine vessel or other moving vehicle
+    """
+    PrecedingTimeLapseSurveyID: (
+        constr(
+            pattern=r'^[\w\-\.]+:master-data\-\-GravityMagneticAcquisitionSurvey:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Preceding Time Lapse Survey ID')
+    """
+    If populated, this survey is part of a time-lapse survey sequence. It identifies the preceding Gravity Magnetic Acquisition Survey. The first survey in the sequence has an empty or absent PrecedingTimeLapseSurveyID.
+    """
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/masterdata/hole_section/__init__.py

@@ -0,0 +1,2 @@
+# generated by datamodel-codegen:
+#   filename:  tmp4rfivwe4

osdu_models/masterdata/hole_section/v1_0_0.py

@@ -0,0 +1,45 @@
+# generated by datamodel-codegen:
+#   filename:  masterdata/hole_section/v1_0_0.json
+
+from __future__ import annotations
+from pydantic import ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_master.v1_0_0 import AbstractMaster
+
+
+class Data(OsduCommonResources, AbstractMaster):
+    """
+    `data` payload for HoleSection 1.0.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: constr(
+        pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Wellbore ID')
+    """
+    Identifier of the planned Wellbore
+    """
+    Name: str = Field(..., title='Name')
+    """
+    Human recognizable context for the section.
+    """
+    Size: float = Field(..., title='Size')
+    """
+    The nominal diameter of the section.
+    """
+    Comment: str | None = Field(None, title='Comment')
+    """
+    A comment or description associated with the section
+    """
+    MeasuredDepthTop: float = Field(..., title='Measured Depth Start')
+    """
+    The Measured depth at the top of the hole section. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    MeasuredDepthBase: float = Field(..., title='Measured Depth End')
+    """
+    The Measured depth at the base of the hole section. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/masterdata/hole_section/v1_1_0.py

@@ -0,0 +1,52 @@
+# generated by datamodel-codegen:
+#   filename:  masterdata/hole_section/v1_1_0.json
+
+from __future__ import annotations
+from pydantic import ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_master.v1_1_0 import AbstractMaster
+
+
+class Data(OsduCommonResources, AbstractMaster):
+    """
+    `data` payload for HoleSection 1.1.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: constr(
+        pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Wellbore ID')
+    """
+    Identifier of the planned Wellbore
+    """
+    Name: str = Field(..., title='Name')
+    """
+    Human recognizable context for the section.
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement | None = Field(
+        None, title='Vertical Measurement Reference'
+    )
+    """
+    References an entry in the VerticalMeasurements array for the Wellbore identified by WellboreID, or a standalone vertical reference which defines the vertical reference datum for all measured depths of the HoleSection record. If this is not populated, the VerticalMeasurement is derived from the Wellbore.
+    """
+    Size: float = Field(..., title='Size')
+    """
+    The nominal diameter of the section.
+    """
+    Comment: str | None = Field(None, title='Comment')
+    """
+    A comment or description associated with the section
+    """
+    MeasuredDepthTop: float = Field(..., title='Measured Depth Start')
+    """
+    The Measured depth at the top of the hole section. For actual wellbores use data.VerticalMeasurement as wellbore ZDP. For planned wellbores, navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    MeasuredDepthBase: float = Field(..., title='Measured Depth End')
+    """
+    The Measured depth at the base of the hole section. For actual wellbores use data.VerticalMeasurement as wellbore ZDP. For planned wellbores, navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/masterdata/hole_section/v1_2_0.py

@@ -0,0 +1,105 @@
+# generated by datamodel-codegen:
+#   filename:  masterdata/hole_section/v1_2_0.json
+
+from __future__ import annotations
+from pydantic import ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_master.v1_1_0 import AbstractMaster
+
+
+class Data(OsduCommonResources, AbstractMaster):
+    """
+    `data` payload for HoleSection 1.2.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: constr(
+        pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(
+        ...,
+        examples=['namespace:master-data--Wellbore:11000091175501:'],
+        title='Wellbore ID',
+    )
+    """
+    Parent Wellbore Identifier
+    """
+    WellActivityID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-WellActivity:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:master-data--WellActivity:110000911755DRO:'],
+        title='Well Activity ID',
+    )
+    """
+    Identifier of the Well Activity in which the hole section was drilled
+    """
+    Name: str = Field(..., examples=['8.5" Hole Section'], title='Name')
+    """
+    Human recognizable context/name of the hole section.
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement | None = Field(
+        None, title='Vertical Measurement Reference'
+    )
+    """
+    References an entry in the VerticalMeasurements array for the Wellbore identified by WellboreID, or a standalone vertical reference which defines the vertical reference datum for all measured depths of the HoleSection record. If this is not populated, the VerticalMeasurement is derived from the Wellbore.
+    """
+    Size: float = Field(..., examples=[8.5], title='Size')
+    """
+    The nominal diameter of the hole section.
+    """
+    MeasuredDepthTop: float = Field(..., examples=[10500], title='Measured Depth Start')
+    """
+    The Measured depth at the top of the hole section. For actual wellbores use data.VerticalMeasurement as wellbore ZDP. For planned wellbores, navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    MeasuredDepthBase: float = Field(..., examples=[19600], title='Measured Depth End')
+    """
+    The Measured depth at the base of the hole section. For actual wellbores use data.VerticalMeasurement as wellbore ZDP. For planned wellbores, navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in. data.VerticalMeasurement.
+    """
+    StartDateTime: str | None = Field(
+        None, examples=['2023-01-01T11:00:00.000Z'], title='Start Date/time'
+    )
+    """
+    Date/time when drilling commenced on the hole section.
+    """
+    EndDateTime: str | None = Field(
+        None, examples=['2023-01-17T18:30:00.000Z'], title='End Date/time'
+    )
+    """
+    Date/time when drilling completed on the hole section.
+    """
+    IsPilotHole: bool | None = Field(None, examples=[False], title='Is Pilot Hole')
+    """
+    Flag if Hole Section was drilled as a pilot hole
+    """
+    PlannedMeasuredDepthBase: float | None = Field(
+        None, examples=[10000], title='Planned Measured Depth Base'
+    )
+    """
+    Planned Base measured depth of the Hole Section. Only used for Actual Hole Sections to enable a comparison against plan.
+    """
+    PlannedTrueVerticalDepthBase: float | None = Field(
+        None, examples=[20000], title='Planned True Vertical Depth Base'
+    )
+    """
+    Planned Base true vertical depth of the Hole Section. Only used for Actual Hole Sections to enable a comparison against plan.
+    """
+    DrillingActivityCode: str | None = Field(
+        None, examples=['PROD'], title='Drilling Activity Code'
+    )
+    """
+    Activity Code relevant for drilling the hole section.
+    """
+    Comment: str | None = Field(
+        None,
+        examples=['8-1/2" hole section drilled 400\' deeper than plan.'],
+        title='Comment',
+    )
+    """
+    A comment or description associated with the hole section
+    """
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/masterdata/hole_section/v1_3_0.py

@@ -0,0 +1,105 @@
+# generated by datamodel-codegen:
+#   filename:  masterdata/hole_section/v1_3_0.json
+
+from __future__ import annotations
+from pydantic import ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_master.v1_2_0 import AbstractMaster
+
+
+class Data(OsduCommonResources, AbstractMaster):
+    """
+    `data` payload for HoleSection 1.3.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: constr(
+        pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(
+        ...,
+        examples=['namespace:master-data--Wellbore:11000091175501:'],
+        title='Wellbore ID',
+    )
+    """
+    Parent Wellbore Identifier
+    """
+    WellActivityID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-WellActivity:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:master-data--WellActivity:110000911755DRO:'],
+        title='Well Activity ID',
+    )
+    """
+    Identifier of the Well Activity in which the hole section was drilled
+    """
+    Name: str = Field(..., examples=['8.5" Hole Section'], title='Name')
+    """
+    Human recognizable context/name of the hole section.
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement | None = Field(
+        None, title='Vertical Measurement Reference'
+    )
+    """
+    References an entry in the VerticalMeasurements array for the Wellbore identified by WellboreID, or a standalone vertical reference which defines the vertical reference datum for all measured depths of the HoleSection record. If this is not populated, the VerticalMeasurement is derived from the Wellbore.
+    """
+    Size: float = Field(..., examples=[8.5], title='Size')
+    """
+    The nominal diameter of the hole section.
+    """
+    MeasuredDepthTop: float = Field(..., examples=[10500], title='Measured Depth Start')
+    """
+    The Measured depth at the top of the hole section. For actual wellbores use data.VerticalMeasurement as wellbore ZDP. For planned wellbores, navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    MeasuredDepthBase: float = Field(..., examples=[19600], title='Measured Depth End')
+    """
+    The Measured depth at the base of the hole section. For actual wellbores use data.VerticalMeasurement as wellbore ZDP. For planned wellbores, navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in. data.VerticalMeasurement.
+    """
+    StartDateTime: str | None = Field(
+        None, examples=['2023-01-01T11:00:00.000Z'], title='Start Date/time'
+    )
+    """
+    Date/time when drilling commenced on the hole section.
+    """
+    EndDateTime: str | None = Field(
+        None, examples=['2023-01-17T18:30:00.000Z'], title='End Date/time'
+    )
+    """
+    Date/time when drilling completed on the hole section.
+    """
+    IsPilotHole: bool | None = Field(None, examples=[False], title='Is Pilot Hole')
+    """
+    Flag if Hole Section was drilled as a pilot hole
+    """
+    PlannedMeasuredDepthBase: float | None = Field(
+        None, examples=[10000], title='Planned Measured Depth Base'
+    )
+    """
+    Planned Base measured depth of the Hole Section. Only used for Actual Hole Sections to enable a comparison against plan.
+    """
+    PlannedTrueVerticalDepthBase: float | None = Field(
+        None, examples=[20000], title='Planned True Vertical Depth Base'
+    )
+    """
+    Planned Base true vertical depth of the Hole Section. Only used for Actual Hole Sections to enable a comparison against plan.
+    """
+    DrillingActivityCode: str | None = Field(
+        None, examples=['PROD'], title='Drilling Activity Code'
+    )
+    """
+    Activity Code relevant for drilling the hole section.
+    """
+    Comment: str | None = Field(
+        None,
+        examples=['8-1/2" hole section drilled 400\' deeper than plan.'],
+        title='Comment',
+    )
+    """
+    A comment or description associated with the hole section
+    """
+    ExtensionProperties: dict[str, Any] | None = None