osdu-python-models 0.5.0__py3-none-any.whl

osdu_models/workproductcomponent/well_pressure_test_interpretation/__init__.py

@@ -0,0 +1,2 @@
+# generated by datamodel-codegen:
+#   filename:  tmp4rfivwe4

osdu_models/workproductcomponent/well_pressure_test_interpretation/v1_0_0.py

@@ -0,0 +1,354 @@
+# generated by datamodel-codegen:
+#   filename:  workproductcomponent/well_pressure_test_interpretation/v1_0_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from ...abstract.abstract_property_type import v1_0_0
+from ...abstract.abstract_facet import v1_0_0 as v1_0_0_1
+from ...abstract.abstract_activity_parameter import v1_1_0
+from ...abstract.abstract_remark import v1_0_0 as v1_0_0_2
+from typing import Any
+from ...abstract.abstract_contact import v1_1_0 as v1_1_0_1
+from ...abstract.abstract_column_based_table import v1_2_0
+from ...abstract.abstract_common_resources.v1_0_1 import OsduCommonResources
+from ...abstract.abstract_wpcgroup_type.v1_2_0 import AbstractWPCGroupType
+from ...abstract.abstract_work_product_component.v1_1_0 import (
+    AbstractWorkProductComponent,
+)
+
+
+class PressureGradient(BaseModel):
+    """
+    This contains the accepted fluid pressure gradients used in well test interpretation for the reservoir element. Fluid context is applied by the use of Facets e.g. what+Gas, what+Oil, qualifier+Total
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    PressureGradientValue: float | None = Field(None, title='Pressure Gradient Value')
+    """
+    The gradient (change in pressure per unit length) value in the borehole, of the element defined by the FacetID, used for calculating the pressure in the perforated interval from pressure at sensor depth.
+    """
+    PressureGradientPositiveVerticalDeltaValue: float | None = Field(
+        None, title='Pressure Gradient Positive Vertical Delta Value'
+    )
+    """
+    The pressure gradient that represents the depth vertically above that marks the limit of the high confidence range for the fluid marker.
+    """
+    PressureGradientNegativeVerticalDeltaValue: float | None = Field(
+        None, title='Pressure Gradient Negative Vertical Delta Value'
+    )
+    """
+    The pressure gradient that represents the depth vertically below that marks the limit of the high confidence range for the fluid marker
+    """
+    PressureGradientCalculationMethodID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-PressureGradientCalculationMethod:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:reference-data--PressureGradientCalculationMethod:TrendAnalysis:'
+        ],
+        title='Pressure Gradient Calculation Method ID',
+    )
+    """
+    The method that was used to calculate the Pressure Gradient Value including the uncertainty range
+    """
+    PropertyType: v1_0_0.AbstractPropertyType | None = Field(
+        None, title='Property Type'
+    )
+    """
+    It holds the PropertyType associated with this reference property type, further defining the semantics of the value. It contains a relationship to PropertyType record and its (de-normalized) name. String or number values can represent e.g. A date or a time by referring to the respective PropertyType record id.
+    """
+    FacetIDs: list[v1_0_0_1.AbstractFacet] | None = Field(None, title='Facet Ids')
+    """
+    Unique Nested Ordered Array with: FacetType, FacetRole, both calling specific references
+
+    FacetType: Enumerations of the type of additional context about the nature of a property type (it may include conditions, direction, qualifiers, or statistics). 
+
+    FacetRole: Additional context about the nature of a property type. The purpose of such attribute is to minimize the need to create specialized property types by mutualizing some well known qualifiers such as "maximum", "minimum" which apply to a lot of different property types.
+    """
+    GradientsUOMID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Gradients Unit of Measure ID')
+    """
+    Unit of Measure used to capture Pressure Gradients - as not covered by Energistics Standard Units of Measure System
+    """
+
+
+class InterpretationInput(BaseModel):
+    """
+    Segment that contains important reference elements used to support the interpretation activity
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreMarkerSetID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-WellboreMarkerSet:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--WellboreMarkerSet:15-3-7-SingleRank-:'
+        ],
+        title='Wellbore Marker Set ID',
+    )
+    """
+    Optional reference to the WellboreMarkerSet containing the fluid contacts used for pressure test interpretation
+    """
+    GeoLabelSetID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-GeoLabelSet:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:work-product-component--GeoLabelSet:15-3-7-Labels-:'],
+        title='Geo Label Set ID',
+    )
+    """
+    Optional reference to the GeoLabelSet containing information related to the Reservoir or ReservoirSegment
+    """
+    PressureGradients: list[PressureGradient] | None = Field(
+        None, title='Pressure Gradients'
+    )
+    """
+    This contains the accepted fluid pressure gradients used in well test interpretation for the reservoir element. Fluid context is applied by the use of Facets e.g. what+Gas, what+Oil, qualifier+Total
+    """
+    Parameters: list[v1_1_0.AbstractActivityParameter] | None = Field(
+        None, title='Parameters'
+    )
+    """
+    Provides an array of general parameter values used in the Well Test Interpretation activity.
+    """
+    Remarks: list[v1_0_0_2.AbstractRemark] | None = Field(None, title='Remarks')
+    """
+    Time stamped remarks associated with the input information used in the interpretation activity
+    """
+
+
+class AppliedPressureCorrection(BaseModel):
+    """
+    Pressure correction(s) applied when interpreting pressure from the gauge depth to the reservoir pressure datum. Further context can be applied to the Pressure Correction by the use of Facets e.g. what+Gas, what+Oil, qualifier+Total
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    PressureCorrectionValue: float | None = Field(
+        None, title='Pressure Correction Value'
+    )
+    """
+    The pressure correction value applied when interpreting pressure from the gauge depth to the reservoir pressure datum.
+    """
+    FacetIDs: list[v1_0_0_1.AbstractFacet] | None = Field(None, title='Facet Ids')
+    """
+    Unique Ordered Nested Array with: FacetType, FacetRole, both calling specific references
+
+    FacetType: Enumerations of the type of additional context about the nature of a property type (it may include conditions, direction, qualifiers, or statistics). 
+
+    FacetRole: Additional context about the nature of a property type. The purpose of such attribute is to minimize the need to create specialized property types by mutualizing some well known qualifiers such as "maximum", "minimum" which apply to a lot of different property types.
+    """
+
+
+class InterpretationResult(BaseModel):
+    """
+    Contains the reservoir specific results of interpretations carried out on the results of well tests. Also contains the parameter values needed to calculate the pressure at reservoir datum.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellPressureTestInterpretationNumber: int | None = Field(
+        None, examples=[1], title='Well Pressure Test Interpretation Number'
+    )
+    """
+    The unique number of the result array member in the data.InterpretationResults[] array.
+    """
+    WellPressureTestAcquisitionStationIdentifier: int | None = Field(
+        None, title='Well Pressure Test Acquisition Station Identifier'
+    )
+    """
+    Optional Identifier of the Station Number that is most closely associated with this result within the related Well Pressure Test Raw Measurement Work Product Component
+    """
+    WellPressureTestRawMeasurementTestIdentifier: int | None = Field(
+        None, title='Well Pressure Test Raw Measurement Test Identifier'
+    )
+    """
+    Optional Identifier of the Test Number that is most closely associated with this interpretation array element within the related Well Pressure Test Raw Measurement Work Product Component
+    """
+    WellPressureTestRawMeasurementTestPeriodIdentifier: int | None = Field(
+        None, title='Well Pressure Test Raw Measurement Test Period Identifier'
+    )
+    """
+    Optional Identifier of the Test Period Number that is most closely associated with this interpretation array element within the related Well Pressure Test Raw Measurement Work Product Component
+    """
+    IsPreferred: bool | None = Field(None, title='Is Preferred')
+    """
+    Boolean indicating where this Interpretation result is the preferred where multiple interpretation results are present
+    """
+    InterpretationInput_1: InterpretationInput | None = Field(
+        None, alias='InterpretationInput', title='Interpretation Input'
+    )
+    """
+    Segment that contains important reference elements used to support the interpretation activity
+    """
+    DominantReservoirEntityID: (
+        constr(
+            pattern=r'^[\w\-\.]+:(master-data\-\-Reservoir|master-data\-\-ReservoirSegment):[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Parent Reservoir Entity Id')
+    """
+    Identifier linking to the dominant parent reservoir entity (It could be either a Reservoir or ReservoirSegment). This is the entity whose characteristics such as Reservoir Pressure are interpreted
+    """
+    CommingledReservoirEntityIDs: (
+        list[
+            constr(
+                pattern=r'^[\w\-\.]+:(master-data\-\-Reservoir|master-data\-\-ReservoirSegment):[\w\-\.\:\%]+:[0-9]*$'
+            )
+        ]
+        | None
+    ) = Field(None, title='Commingled Reservoir Entity IDs')
+    """
+    Array of optional commingled Reservoirs or Reservoir Segments that contributed to the well test outcome.
+    """
+    GeologicUnitInterpretationIDs: (
+        list[
+            constr(
+                pattern=r'^[\w\-\.]+:(work-product-component\-\-StratigraphicUnitInterpretation|work-product-component\-\-GeobodyInterpretation|work-product-component\-\-RockFluidUnitInterpretation):[\w\-\.\:\%]+:[0-9]*$'
+            )
+        ]
+        | None
+    ) = Field(None, title='Geologic Unit Interpretation Ids')
+    """
+    An array of StratigraphicUnitInterpretation, GeobodyInterpretation or RockFluidUnitInterpretation record Ids evaluated by the interpretation activity
+    """
+    ReservoirDatumTrueVerticalDepth: float | None = Field(
+        None, title='Reservoir Datum True Vertical Depth'
+    )
+    """
+    The true vertical depth value for the reservoir pressure datum used in the analysis for calculation of the reservoir pressure. Note that this may vary from the reference depth record in the master-data Reservoir|ReservoirSegment as can change over the lifecycle of the Reservoir.
+    """
+    ReservoirDatumCalculationSubjectiveClassificationRatingID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-SubjectiveClassificationRating:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:reference-data--SubjectiveClassificationRating:Quality.Good:'
+        ],
+        title='Reservoir Datum Calculation Subjective Classification Rating ID',
+    )
+    """
+    The subjective quality classification of the datum calculation. E.g. Excellent, Good, Poor etc. A Confidence classification could also be used here if there is an issue with the certainty of the interpretation.
+    """
+    AppliedPressureCorrections: list[AppliedPressureCorrection] | None = Field(
+        None, title='Applied Pressure Corrections'
+    )
+    """
+    An array of pressure correction(s) applied when interpreting pressure from the gauge depth to the reservoir pressure datum.
+    """
+    ReservoirPressureAtDatumDepth: float | None = Field(
+        None, title='Reservoir Pressure At Datum Depth'
+    )
+    """
+    The interpreted reservoir pressure at the reservoir datum depth
+    """
+    Remarks: list[v1_0_0_2.AbstractRemark] | None = Field(None, title='Remarks')
+    """
+    Time stamped remarks associated with the reservoir properties calculation activity
+    """
+
+
+class Data(OsduCommonResources, AbstractWPCGroupType, AbstractWorkProductComponent):
+    """
+    `data` payload for WellPressureTestInterpretation 1.0.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellPressureTestRawMeasurementID: constr(
+        pattern=r'^[\w\-\.]+:work-product-component\-\-WellPressureTestRawMeasurement:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(
+        ...,
+        examples=[
+            'namespace:work-product-component--WellPressureTestRawMeasurement:PressureTest1:'
+        ],
+        title='Well Pressure Test Raw Measurement ID',
+    )
+    """
+    Identifier of the related Well Pressure Test Raw Measurement Work Product Component
+    """
+    WellPressureTestRawMeasurementTestIdentifier: int | None = Field(
+        None, title='Well Pressure Test Raw Measurement Test Identifier'
+    )
+    """
+    Optional Identifier of the Test Number that is most representative of the overall interpretation within the related Well Pressure Test Raw Measurement Work Product Component
+    """
+    WellPressureTestRawMeasurementTestPeriodIdentifier: int | None = Field(
+        None, title='Well Pressure Test Raw Measurement Test Period Identifier'
+    )
+    """
+    Optional Identifier of the Test Measurement Period Number that is most representative of the overall interpretation within the related Well Pressure Test Raw Measurement Work Product Component
+    """
+    PressureTestInterpretationDateTime: str | None = Field(
+        None, title='Pressure Test Interpretation Date Time'
+    )
+    """
+    The date (and time) on which the interpretation was performed
+    """
+    InterpretationSubjectiveClassificationRatingID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-SubjectiveClassificationRating:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:reference-data--SubjectiveClassificationRating:Quality.Excellent:'
+        ],
+        title='Interpretation Subjective Classification Rating ID',
+    )
+    """
+    The subjective quality classification of the analysis (interpretation) and its conclusions. E.g. Excellent, Good, Poor etc. A Confidence classification could also be used here if there is an issue with the certainty of the interpretation.
+    """
+    IsPreferred: bool | None = Field(None, title='Is Preferred')
+    """
+    Boolean indicating where this Interpretation is the preferred record where multiple interpretations may have been performed over time e.g. re-interpretation
+    """
+    InterpretationAnalysts: list[v1_1_0_1.AbstractContact] | None = Field(
+        None, title='Interpretation Analysts'
+    )
+    """
+    The details of the individual(s) responsible for performing the interpretation activity
+    """
+    Remarks: list[v1_0_0_2.AbstractRemark] | None = Field(None, title='Remarks')
+    """
+    Time stamped remarks associated with the interpretation activity
+    """
+    InterpretationResults: list[InterpretationResult] | None = Field(
+        None, title='Interpretation Results'
+    )
+    """
+    Array of detailed results of the interpretation activity
+    """
+    InterpretationResultProperties: v1_2_0.AbstractColumnBasedTable | None = Field(
+        None, title='Interpretation Result Property Values'
+    )
+    """
+    An embedded ColumnBasedTable with the properties including their values associated to the results in data.InterpretationResults[]. The association is done by array index.
+    This usage can be also manage through dataset with file or DDMS contents.
+    """
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/workproductcomponent/well_pressure_test_raw_measurement/__init__.py

@@ -0,0 +1,2 @@
+# generated by datamodel-codegen:
+#   filename:  tmp4rfivwe4

osdu_models/workproductcomponent/well_pressure_test_raw_measurement/v1_0_0.py

@@ -0,0 +1,231 @@
+# generated by datamodel-codegen:
+#   filename:  workproductcomponent/well_pressure_test_raw_measurement/v1_0_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from typing import Any
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_wpcgroup_type.v1_2_0 import AbstractWPCGroupType
+from ...abstract.abstract_work_product_component.v1_1_0 import (
+    AbstractWorkProductComponent,
+)
+
+
+class PreTest(BaseModel):
+    """
+    Describes the pieces of information required to identity individual pretests within the complete record.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    PreTestNumber: int | None = Field(None, title='Pre Test Number')
+    """
+    Sequential number identifying the pretest within the record
+    """
+    PreTestStartTime: float | None = Field(None, title='Pre Test Start Time')
+    """
+    Time index where the individual pretest starts into the sequence
+    """
+    PreTestEndTime: float | None = Field(None, title='Pre Test End Time')
+    """
+    Time index where the individual pretest ends into the sequence
+    """
+
+
+class Curve(BaseModel):
+    """
+    Describing the characteristics of the "Pressure against Time" recorded curves.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    CurveID: str | None = Field(None, title='Curve ID')
+    """
+    The ID of the Well Log Curve
+    """
+    NullValue: bool | None = Field(None, title='Null Value')
+    """
+    Indicates that there is no measurement within the curve
+    """
+    TimeUnitID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Time Unit ID')
+    """
+    Unit of Measure Time Reference
+    """
+    CurveUnitID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Curve Unit ID')
+    """
+    Unit of Measure for the Log Curve
+    """
+    Mnemonic: str | None = Field(None, examples=['PRES_HDRB.BAR'], title='Mnemonic')
+    """
+    The Mnemonic of the Log Curve is the value as received either from Raw Providers or from Internal Processing team
+    """
+    NumberOfColumns: int | None = Field(None, examples=[192], title='Number Of Columns')
+    """
+    The number of columns present in this Curve for a single reference value. For simple logs this is typically 1; for image logs this holds the number of image traces or property series. Further information about the columns can be obtained via the respective log or curve APIs of the Domain Data Management Service.
+    """
+    CurveSampleTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-CurveSampleType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:reference-data--CurveSampleType:float:'],
+        title='Curve Sample Type ID',
+    )
+    """
+    The value type to be expected as curve sample values.
+    """
+    CurveDescription: str | None = Field(
+        None,
+        examples=[
+            'CBL Adjustment Factor, Resistivity Inversion Selection, Detector 1 Barite Constant'
+        ],
+        title='Curve Description',
+    )
+    """
+    Mnemonic-level curve description is used during parsing or reading and ingesting LAS or DLIS files, to explain the type of measurement being looked at, specifically for that moment. Curve description is specific to that single (log) mnemonic and for the entire log (acquisition run) interval. In essence, curve description defines the internal factors such as what the "curve" or measurement ideally is representing, how is it calculated, what are the assumptions and the "constants".
+    """
+
+
+class Measurement(BaseModel):
+    """
+    Unitary Measurement Serie Description
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellPressureTestAcquisitionStationIdentifier: int | None = Field(
+        None, title='Well Pressure Test Acquisition Station Identifier'
+    )
+    """
+    Identifier of the Station within the acquisition job captured in the unitary serie
+    """
+    PressurePointMeasuredDepth: float | None = Field(
+        None, title='Pressure Point Measured Depth'
+    )
+    """
+    Measured Depth of the station for Stationary Tests - mutually exclusive with (PressureTestTop/bottom measuredDepth
+    """
+    PressureTestTopMeasuredDepth: float | None = Field(
+        None, title='Pressure Point Top Measured Depth'
+    )
+    """
+    Measured Depth of the top station for Non Stationary Tests - mutually exclusive with (Pressure Point Measured Depth
+    """
+    PressureTestBottomMeasuredDepth: float | None = Field(
+        None, title='Pressure Point Bottom Measured Depth'
+    )
+    """
+    Measured Depth of the bottom station for Non Stationary Tests- mutually exclusive with (Pressure Point Measured Depth
+    """
+    TestNumber: int | None = Field(None, title='Test Number')
+    """
+    Sequential number of the test (or pre-test) which identifies it into the record
+    """
+    ActiveProbeTypeID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-WellPressureTestProbeType:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Pressure Test Probe Type Identifier')
+    """
+    Describe the active Probe type for this current measurement station
+    """
+    ActiveGaugeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-WellPressureTestGaugeType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Active Gauge Identifier')
+    """
+    Identifier of the unitary gauge active for this specific curve measurement
+    """
+    PreTests: list[PreTest] | None = Field(None, title='Pre Tests')
+    """
+    array of information to identify pretests measurements within the complete measurement recording.
+    """
+    IsTubular: bool | None = Field(None, title='Is Tubular')
+    """
+    Boolean that indicates the measurement is tubular (meaning proceeded inside the installed tubular) - or annular otherwise.
+    """
+    DetailedTestTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-WellPressureDetailedTestCategory:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Detailed Test Type ID')
+    """
+    Identifier of the detailed test run at this station (such as miniDST, miniFrac,…)
+    """
+    DepthReference: v1_0_0.AbstractFacilityVerticalMeasurement | None = Field(
+        None, title='Depth Reference'
+    )
+    """
+    The vertical measurement reference for this well logging acquisition activity. This object defines the vertical reference datum for the measured depths.
+    """
+    TestReliabilityID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-WellPressureTestValidityStatus:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Test Reliability ID')
+    """
+    Identifier of the reference data record indicating the reliability of the tests. This encapsulates the common "TestSuccess" notion - but allows for more flexibility
+    """
+
+
+class Data(OsduCommonResources, AbstractWPCGroupType, AbstractWorkProductComponent):
+    """
+    `data` payload for WellPressureTestRawMeasurement 1.0.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellPressureTestAcquisitionJobID: constr(
+        pattern=r'^[\w\-\.]+:master-data\-\-WellPressureTestAcquisitionJob:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Well Pressure Test Acquisition Job ID')
+    """
+    Identifier of the acquisition job master data.
+    """
+    WellPressureTestAcquisitionRunIdentifier: int = Field(
+        ..., title='Well Pressure Test Acquisition Run Identifier'
+    )
+    """
+    Identifier of the Run within the acquisition job
+    """
+    AcquisitionStringToolFace: float | None = Field(
+        None, title='Acquisition String ToolFace'
+    )
+    """
+    Angle of rotation of the Acquisition String while running this test
+    """
+    PressureTestStartDate: str | None = Field(None, title='Pressure Test Start Date')
+    """
+    The date (and time) at which the test started
+    """
+    ClosedInDate: str | None = Field(None, title='Closed In Date')
+    """
+    Date that the production string has been closed in prior to the pressure test.
+    """
+    Measurements: list[Measurement] | None = Field(None, title='Measurements')
+    """
+    Array of comprehensive description of the well test raw measurement (one entry per gauge's depth)
+    """
+    Curves: list[Curve] | None = Field(None, title='Curves')
+    """
+    Array of unitary Curve (Pressure against Time) description
+    """
+    ExtensionProperties: dict[str, Any] | None = None