osdu-python-models 0.5.0__py3-none-any.whl

osdu_models/workproductcomponent/wellbore_interval_set/v1_1_0.py

@@ -0,0 +1,222 @@
+# generated by datamodel-codegen:
+#   filename:  workproductcomponent/wellbore_interval_set/v1_1_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_column_based_table import v1_0_0 as v1_0_0_1
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_wpcgroup_type.v1_1_0 import AbstractWPCGroupType
+from ...abstract.abstract_work_product_component.v1_1_0 import (
+    AbstractWorkProductComponent,
+)
+
+
+class Interval(BaseModel):
+    """
+    An interval given either by relationships to top/base markers or standalone top/base depths. To avoid confusion about entry and exit depths the naming convention uses Start as the entry point of the well path into the geologic unit and Stop as the exit point. For unfolded geologic units and vertical wellbores Start is Top and Stop is Base.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    IntervalID: str | None = Field(
+        None, examples=['ba829e6d-30e0-4375-906c-4e7c62c9f7ec'], title='Interval ID'
+    )
+    """
+    The unique identifier of the interval array member in the data.Intervals[] array. Ideally a UUID.
+    """
+    GeologicUnitInterpretationIDs: (
+        list[
+            constr(
+                pattern=r'^[\w\-\.]+:(work-product-component\-\-StratigraphicUnitInterpretation|work-product-component\-\-GeobodyInterpretation|work-product-component\-\-RockFluidUnitInterpretation):[\w\-\.\:\%]+:[0-9]*$'
+            )
+        ]
+        | None
+    ) = Field(
+        None,
+        examples=[
+            [
+                'partition-id:work-product-component--StratigraphicUnitInterpretation:Draupne-:'
+            ]
+        ],
+        title='Interpretation Ids',
+    )
+    """
+    An array of StratigraphicUnitInterpretation, GeobodyInterpretation or RockFluidUnitInterpretation record Ids associated to this interval.
+    """
+    StartMeasuredDepth: float | None = Field(
+        None, examples=[4049], title='Start Interval Measured Depth'
+    )
+    """
+    The minimal MeasuredDepth of the interval. In the most common case this is the top.  If this value is associated with a marker then this value is a denormalization of data.Markers[].MarkerMeasuredDepth where the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StartSubSeaVerticalDepth: float | None = Field(
+        None, examples=[4030.9], title='Start Sub-Sea Vertical Depth'
+    )
+    """
+    True vertical depth sub-sea of the start of the interval. This is the same as true vertical depth referenced to the vertical CRS "MSL depth". If the start of the interval is associated with a marker then this value is a denormalization of data.Markers[].MarkerSubSeaVerticalDepth where the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StartIntervalName: str | None = Field(
+        None, examples=['Top-Draupne'], title='Start Interval Marker Name'
+    )
+    """
+    Name of the interval start (typically the top); when associated with a marker in a WellboreMarkerSet then this name is a denormalization of data.Markers[].MarkerName where the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StartMarkerSetID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-WellboreMarkerSet:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--WellboreMarkerSet:15-3-7-SingleRank-:'
+        ],
+        title='Start Interval WellboreMarkerSet ID',
+    )
+    """
+    Optional reference to the WellboreMarkerSet containing the interval start (typically the top), with MarkerID equals StartMarkerID.
+    """
+    StartMarkerID: str | None = Field(
+        None,
+        examples=['a580a3bb-c2db-4845-bbc1-050b417307c0'],
+        title='Start Interval Marker ID',
+    )
+    """
+    Individual markers are not globally identifiable. TopMarkerID is the unique id (MarkerID) of the top interval marker (typically the interval base) in the data.Markers[] array where the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StartBoundaryInterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:(work-product-component\-\-HorizonInterpretation|work-product-component\-\-GeobodyBoundaryInterpretation|work-product-component\-\-FaultInterpretation):[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--HorizonInterpretation:Top-Draupne-:'
+        ],
+        title='Start Interval Boundary Interpretation ID',
+    )
+    """
+    The optional relationship to a HorizonInterpretation, GeobodyBoundaryInterpretation or FaultInterpretation. If the interval start (typically the top) is associated with a marker, this is considered a denormalization of the data.Markers[].InterpretationID for the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StopMeasuredDepth: float | None = Field(
+        None, examples=[4502], title='Stop Interval Measured Depth'
+    )
+    """
+    The maximum MeasuredDepth of the interval (typically the base). If the interval stop is associated with a marker then this value is a denormalization of data.Markers[].MarkerMeasuredDepth where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+    StopSubSeaVerticalDepth: float | None = Field(
+        None, examples=[4483.8], title='Stop Sub-Sea Vertical Depth'
+    )
+    """
+    True vertical depth sub-sea of the interval stop (typically the base). This is the same as true vertical depth referenced to the vertical CRS "MSL depth". If the interval stop is associated with a marker then this value is a denormalization of data.Markers[].MarkerSubSeaVerticalDepth where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+    StopIntervalName: str | None = Field(
+        None, examples=['Top-Heather'], title='Stop Interval Marker Name'
+    )
+    """
+    Name of the interval stop (typically the base); when associated with a marker in a WellboreMarkerSet then this name is a denormalization of data.Markers[].MarkerName where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+    StopMarkerSetID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-WellboreMarkerSet:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--WellboreMarkerSet:15-3-7-SingleRank-:'
+        ],
+        title='Stop Interval WellboreMarkerSet ID',
+    )
+    """
+    Optional reference to the WellboreMarkerSet containing the top with MarkerID equals StopMarkerID.
+    """
+    StopMarkerID: str | None = Field(
+        None,
+        examples=['7699229b-36e8-4aed-884f-a1e844e5b9d7'],
+        title='Stop Interval Marker ID',
+    )
+    """
+    Individual markers are not globally identifiable. StopMarkerID is the unique id (MarkerID) of the interval stop (typically the interval base) in the data.Markers[] array where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+    StopBoundaryInterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:(work-product-component\-\-HorizonInterpretation|work-product-component\-\-GeobodyBoundaryInterpretation|work-product-component\-\-FaultInterpretation):[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--HorizonInterpretation:Top-Heather-:'
+        ],
+        title='Stop Interval Boundary Interpretation ID',
+    )
+    """
+    The optional relationship to a HorizonInterpretation, GeobodyBoundaryInterpretation or FaultInterpretation. If the interval stop (typically the base) is associated with a marker, this is considered a denormalization of the data.Markers[].InterpretationID where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+
+
+class Data(OsduCommonResources, AbstractWPCGroupType, AbstractWorkProductComponent):
+    """
+    `data` payload for WellboreIntervalSet 1.1.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:master-data--Wellbore:NPD-4055:'],
+        title='Wellbore ID',
+    )
+    """
+    The relationship to a Wellbore, to which this WellboreIntervalSet is associated with.
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement | None = Field(
+        None, title='Vertical Measurement'
+    )
+    """
+    References an entry in the Vertical Measurement array for the Wellbore identified by WellboreID, which defines the vertical reference datum for all marker measured depths of the WellboreIntervalSet Intervals array. It is strongly recommended specifying the VerticalMeasurement.WellboreTVDTrajectoryID  when SubSeaVerticalDepth are populated for the intervals.
+    """
+    StratigraphicColumnID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-StratigraphicColumn:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Stratigraphic Column ID')
+    """
+    The optional reference to a stratigraphic column (referring to multiple StratigraphicColumnRankInterpretation) providing the stratigraphic framework for the WellboreIntervalSet. It demonstrates the intent to describe complex, potentially overlapping stratigraphic intervals. Only one of the properties StratigraphicColumnID or StratigraphicColumnRankInterpretationID should be populated.
+    """
+    StratigraphicColumnRankInterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-StratigraphicColumnRankInterpretation:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--StratigraphicColumnRankInterpretation:Gudrun-Rank2-:'
+        ],
+        title='Stratigraphic Column Rank Interpretation ID',
+    )
+    """
+    The optional reference to a StratigraphicColumnRankInterpretation. It expresses the intent of a stratigraphic framework with non-overlapping intervals. Only one of the properties StratigraphicColumnID or StratigraphicColumnRankInterpretationID should be populated.
+    """
+    Intervals: list[Interval] | None = Field(None, title='Intervals')
+    """
+    Array of Intervals, index-aligned with IntervalProperties.
+    """
+    IntervalProperties: v1_0_0_1.AbstractColumnBasedTable | None = Field(
+        None, title='Interval Property Values'
+    )
+    """
+    An embedded ColumnBasedTable with the properties including their values associated to the intervals in data.Intervals[]. The association is done by array index.
+    """
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/workproductcomponent/wellbore_interval_set/v1_2_0.py

@@ -0,0 +1,222 @@
+# generated by datamodel-codegen:
+#   filename:  workproductcomponent/wellbore_interval_set/v1_2_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_column_based_table import v1_1_0
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_wpcgroup_type.v1_2_0 import AbstractWPCGroupType
+from ...abstract.abstract_work_product_component.v1_1_0 import (
+    AbstractWorkProductComponent,
+)
+
+
+class Interval(BaseModel):
+    """
+    An interval given either by relationships to top/base markers or standalone top/base depths. To avoid confusion about entry and exit depths the naming convention uses Start as the entry point of the well path into the geologic unit and Stop as the exit point. For unfolded geologic units and vertical wellbores Start is Top and Stop is Base.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    IntervalID: str | None = Field(
+        None, examples=['ba829e6d-30e0-4375-906c-4e7c62c9f7ec'], title='Interval ID'
+    )
+    """
+    The unique identifier of the interval array member in the data.Intervals[] array. Ideally a UUID.
+    """
+    GeologicUnitInterpretationIDs: (
+        list[
+            constr(
+                pattern=r'^[\w\-\.]+:(work-product-component\-\-StratigraphicUnitInterpretation|work-product-component\-\-GeobodyInterpretation|work-product-component\-\-RockFluidUnitInterpretation):[\w\-\.\:\%]+:[0-9]*$'
+            )
+        ]
+        | None
+    ) = Field(
+        None,
+        examples=[
+            [
+                'partition-id:work-product-component--StratigraphicUnitInterpretation:Draupne-:'
+            ]
+        ],
+        title='Interpretation Ids',
+    )
+    """
+    An array of StratigraphicUnitInterpretation, GeobodyInterpretation or RockFluidUnitInterpretation record Ids associated to this interval.
+    """
+    StartMeasuredDepth: float | None = Field(
+        None, examples=[4049], title='Start Interval Measured Depth'
+    )
+    """
+    The minimal MeasuredDepth of the interval. In the most common case this is the top.  If this value is associated with a marker then this value is a denormalization of data.Markers[].MarkerMeasuredDepth where the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StartSubSeaVerticalDepth: float | None = Field(
+        None, examples=[4030.9], title='Start Sub-Sea Vertical Depth'
+    )
+    """
+    True vertical depth sub-sea of the start of the interval. This is the same as true vertical depth referenced to the vertical CRS "MSL depth". If the start of the interval is associated with a marker then this value is a denormalization of data.Markers[].MarkerSubSeaVerticalDepth where the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StartIntervalName: str | None = Field(
+        None, examples=['Top-Draupne'], title='Start Interval Marker Name'
+    )
+    """
+    Name of the interval start (typically the top); when associated with a marker in a WellboreMarkerSet then this name is a denormalization of data.Markers[].MarkerName where the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StartMarkerSetID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-WellboreMarkerSet:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--WellboreMarkerSet:15-3-7-SingleRank-:'
+        ],
+        title='Start Interval WellboreMarkerSet ID',
+    )
+    """
+    Optional reference to the WellboreMarkerSet containing the interval start (typically the top), with MarkerID equals StartMarkerID.
+    """
+    StartMarkerID: str | None = Field(
+        None,
+        examples=['a580a3bb-c2db-4845-bbc1-050b417307c0'],
+        title='Start Interval Marker ID',
+    )
+    """
+    Individual markers are not globally identifiable. TopMarkerID is the unique id (MarkerID) of the top interval marker (typically the interval base) in the data.Markers[] array where the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StartBoundaryInterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:(work-product-component\-\-HorizonInterpretation|work-product-component\-\-GeobodyBoundaryInterpretation|work-product-component\-\-FaultInterpretation):[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--HorizonInterpretation:Top-Draupne-:'
+        ],
+        title='Start Interval Boundary Interpretation ID',
+    )
+    """
+    The optional relationship to a HorizonInterpretation, GeobodyBoundaryInterpretation or FaultInterpretation. If the interval start (typically the top) is associated with a marker, this is considered a denormalization of the data.Markers[].InterpretationID for the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StopMeasuredDepth: float | None = Field(
+        None, examples=[4502], title='Stop Interval Measured Depth'
+    )
+    """
+    The maximum MeasuredDepth of the interval (typically the base). If the interval stop is associated with a marker then this value is a denormalization of data.Markers[].MarkerMeasuredDepth where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+    StopSubSeaVerticalDepth: float | None = Field(
+        None, examples=[4483.8], title='Stop Sub-Sea Vertical Depth'
+    )
+    """
+    True vertical depth sub-sea of the interval stop (typically the base). This is the same as true vertical depth referenced to the vertical CRS "MSL depth". If the interval stop is associated with a marker then this value is a denormalization of data.Markers[].MarkerSubSeaVerticalDepth where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+    StopIntervalName: str | None = Field(
+        None, examples=['Top-Heather'], title='Stop Interval Marker Name'
+    )
+    """
+    Name of the interval stop (typically the base); when associated with a marker in a WellboreMarkerSet then this name is a denormalization of data.Markers[].MarkerName where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+    StopMarkerSetID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-WellboreMarkerSet:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--WellboreMarkerSet:15-3-7-SingleRank-:'
+        ],
+        title='Stop Interval WellboreMarkerSet ID',
+    )
+    """
+    Optional reference to the WellboreMarkerSet containing the top with MarkerID equals StopMarkerID.
+    """
+    StopMarkerID: str | None = Field(
+        None,
+        examples=['7699229b-36e8-4aed-884f-a1e844e5b9d7'],
+        title='Stop Interval Marker ID',
+    )
+    """
+    Individual markers are not globally identifiable. StopMarkerID is the unique id (MarkerID) of the interval stop (typically the interval base) in the data.Markers[] array where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+    StopBoundaryInterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:(work-product-component\-\-HorizonInterpretation|work-product-component\-\-GeobodyBoundaryInterpretation|work-product-component\-\-FaultInterpretation):[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--HorizonInterpretation:Top-Heather-:'
+        ],
+        title='Stop Interval Boundary Interpretation ID',
+    )
+    """
+    The optional relationship to a HorizonInterpretation, GeobodyBoundaryInterpretation or FaultInterpretation. If the interval stop (typically the base) is associated with a marker, this is considered a denormalization of the data.Markers[].InterpretationID where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+
+
+class Data(OsduCommonResources, AbstractWPCGroupType, AbstractWorkProductComponent):
+    """
+    `data` payload for WellboreIntervalSet 1.2.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:master-data--Wellbore:NPD-4055:'],
+        title='Wellbore ID',
+    )
+    """
+    The relationship to a Wellbore, to which this WellboreIntervalSet is associated with.
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement | None = Field(
+        None, title='Vertical Measurement'
+    )
+    """
+    References an entry in the Vertical Measurement array for the Wellbore identified by WellboreID, which defines the vertical reference datum for all marker measured depths of the WellboreIntervalSet Intervals array. It is strongly recommended specifying the VerticalMeasurement.WellboreTVDTrajectoryID  when SubSeaVerticalDepth are populated for the intervals.
+    """
+    StratigraphicColumnID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-StratigraphicColumn:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Stratigraphic Column ID')
+    """
+    The optional reference to a stratigraphic column (referring to multiple StratigraphicColumnRankInterpretation) providing the stratigraphic framework for the WellboreIntervalSet. It demonstrates the intent to describe complex, potentially overlapping stratigraphic intervals. Only one of the properties StratigraphicColumnID or StratigraphicColumnRankInterpretationID should be populated.
+    """
+    StratigraphicColumnRankInterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-StratigraphicColumnRankInterpretation:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--StratigraphicColumnRankInterpretation:Gudrun-Rank2-:'
+        ],
+        title='Stratigraphic Column Rank Interpretation ID',
+    )
+    """
+    The optional reference to a StratigraphicColumnRankInterpretation. It expresses the intent of a stratigraphic framework with non-overlapping intervals. Only one of the properties StratigraphicColumnID or StratigraphicColumnRankInterpretationID should be populated.
+    """
+    Intervals: list[Interval] | None = Field(None, title='Intervals')
+    """
+    Array of Intervals, index-aligned with IntervalProperties.
+    """
+    IntervalProperties: v1_1_0.AbstractColumnBasedTable | None = Field(
+        None, title='Interval Property Values'
+    )
+    """
+    An embedded ColumnBasedTable with the properties including their values associated to the intervals in data.Intervals[]. The association is done by array index.
+    """
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/workproductcomponent/wellbore_interval_set/v1_3_0.py

@@ -0,0 +1,229 @@
+# generated by datamodel-codegen:
+#   filename:  workproductcomponent/wellbore_interval_set/v1_3_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_column_based_table import v1_2_0
+from ...abstract.abstract_time_series_link import v1_0_0 as v1_0_0_1
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_wpcgroup_type.v1_2_0 import AbstractWPCGroupType
+from ...abstract.abstract_work_product_component.v1_1_0 import (
+    AbstractWorkProductComponent,
+)
+
+
+class Interval(BaseModel):
+    """
+    An interval given either by relationships to top/base markers or standalone top/base depths. To avoid confusion about entry and exit depths the naming convention uses Start as the entry point of the well path into the geologic unit and Stop as the exit point. For unfolded geologic units and vertical wellbores Start is Top and Stop is Base.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    IntervalID: str | None = Field(
+        None, examples=['ba829e6d-30e0-4375-906c-4e7c62c9f7ec'], title='Interval ID'
+    )
+    """
+    The unique identifier of the interval array member in the data.Intervals[] array. Ideally a UUID. IntervalID is also used to associate IntervalProperties via the key column data.IntervalProperties.ColumnValues[0].StringColumn[].
+    """
+    GeologicUnitInterpretationIDs: (
+        list[
+            constr(
+                pattern=r'^[\w\-\.]+:(work-product-component\-\-StratigraphicUnitInterpretation|work-product-component\-\-GeobodyInterpretation|work-product-component\-\-RockFluidUnitInterpretation):[\w\-\.\:\%]+:[0-9]*$'
+            )
+        ]
+        | None
+    ) = Field(
+        None,
+        examples=[
+            [
+                'partition-id:work-product-component--StratigraphicUnitInterpretation:Draupne-:'
+            ]
+        ],
+        title='Interpretation Ids',
+    )
+    """
+    An array of StratigraphicUnitInterpretation, GeobodyInterpretation or RockFluidUnitInterpretation record Ids associated to this interval.
+    """
+    StartMeasuredDepth: float | None = Field(
+        None, examples=[4049], title='Start Interval Measured Depth'
+    )
+    """
+    The minimal MeasuredDepth of the interval. In the most common case this is the top.  If this value is associated with a marker then this value is a denormalization of data.Markers[].MarkerMeasuredDepth where the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StartSubSeaVerticalDepth: float | None = Field(
+        None, examples=[4030.9], title='Start Sub-Sea Vertical Depth'
+    )
+    """
+    True vertical depth sub-sea of the start of the interval. This is the same as true vertical depth referenced to the vertical CRS "MSL depth". If the start of the interval is associated with a marker then this value is a denormalization of data.Markers[].MarkerSubSeaVerticalDepth where the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StartIntervalName: str | None = Field(
+        None, examples=['Top-Draupne'], title='Start Interval Marker Name'
+    )
+    """
+    Name of the interval start (typically the top); when associated with a marker in a WellboreMarkerSet then this name is a denormalization of data.Markers[].MarkerName where the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StartMarkerSetID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-WellboreMarkerSet:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--WellboreMarkerSet:15-3-7-SingleRank-:'
+        ],
+        title='Start Interval WellboreMarkerSet ID',
+    )
+    """
+    Optional reference to the WellboreMarkerSet containing the interval start (typically the top), with MarkerID equals StartMarkerID.
+    """
+    StartMarkerID: str | None = Field(
+        None,
+        examples=['a580a3bb-c2db-4845-bbc1-050b417307c0'],
+        title='Start Interval Marker ID',
+    )
+    """
+    Individual markers are not globally identifiable. TopMarkerID is the unique id (MarkerID) of the top interval marker (typically the interval base) in the data.Markers[] array where the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StartBoundaryInterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:(work-product-component\-\-HorizonInterpretation|work-product-component\-\-GeobodyBoundaryInterpretation|work-product-component\-\-FaultInterpretation):[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--HorizonInterpretation:Top-Draupne-:'
+        ],
+        title='Start Interval Boundary Interpretation ID',
+    )
+    """
+    The optional relationship to a HorizonInterpretation, GeobodyBoundaryInterpretation or FaultInterpretation. If the interval start (typically the top) is associated with a marker, this is considered a denormalization of the data.Markers[].InterpretationID for the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StopMeasuredDepth: float | None = Field(
+        None, examples=[4502], title='Stop Interval Measured Depth'
+    )
+    """
+    The maximum MeasuredDepth of the interval (typically the base). If the interval stop is associated with a marker then this value is a denormalization of data.Markers[].MarkerMeasuredDepth where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+    StopSubSeaVerticalDepth: float | None = Field(
+        None, examples=[4483.8], title='Stop Sub-Sea Vertical Depth'
+    )
+    """
+    True vertical depth sub-sea of the interval stop (typically the base). This is the same as true vertical depth referenced to the vertical CRS "MSL depth". If the interval stop is associated with a marker then this value is a denormalization of data.Markers[].MarkerSubSeaVerticalDepth where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+    StopIntervalName: str | None = Field(
+        None, examples=['Top-Heather'], title='Stop Interval Marker Name'
+    )
+    """
+    Name of the interval stop (typically the base); when associated with a marker in a WellboreMarkerSet then this name is a denormalization of data.Markers[].MarkerName where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+    StopMarkerSetID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-WellboreMarkerSet:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--WellboreMarkerSet:15-3-7-SingleRank-:'
+        ],
+        title='Stop Interval WellboreMarkerSet ID',
+    )
+    """
+    Optional reference to the WellboreMarkerSet containing the top with MarkerID equals StopMarkerID.
+    """
+    StopMarkerID: str | None = Field(
+        None,
+        examples=['7699229b-36e8-4aed-884f-a1e844e5b9d7'],
+        title='Stop Interval Marker ID',
+    )
+    """
+    Individual markers are not globally identifiable. StopMarkerID is the unique id (MarkerID) of the interval stop (typically the interval base) in the data.Markers[] array where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+    StopBoundaryInterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:(work-product-component\-\-HorizonInterpretation|work-product-component\-\-GeobodyBoundaryInterpretation|work-product-component\-\-FaultInterpretation):[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--HorizonInterpretation:Top-Heather-:'
+        ],
+        title='Stop Interval Boundary Interpretation ID',
+    )
+    """
+    The optional relationship to a HorizonInterpretation, GeobodyBoundaryInterpretation or FaultInterpretation. If the interval stop (typically the base) is associated with a marker, this is considered a denormalization of the data.Markers[].InterpretationID where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+
+
+class Data(OsduCommonResources, AbstractWPCGroupType, AbstractWorkProductComponent):
+    """
+    `data` payload for WellboreIntervalSet 1.3.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:master-data--Wellbore:NPD-4055:'],
+        title='Wellbore ID',
+    )
+    """
+    The relationship to a Wellbore, to which this WellboreIntervalSet is associated with.
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement | None = Field(
+        None, title='Vertical Measurement'
+    )
+    """
+    References an entry in the Vertical Measurement array for the Wellbore identified by WellboreID, which defines the vertical reference datum for all marker measured depths of the WellboreIntervalSet Intervals array. It is strongly recommended specifying the VerticalMeasurement.WellboreTVDTrajectoryID  when SubSeaVerticalDepth are populated for the intervals.
+    """
+    StratigraphicColumnID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-StratigraphicColumn:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Stratigraphic Column ID')
+    """
+    The optional reference to a stratigraphic column (referring to multiple StratigraphicColumnRankInterpretation) providing the stratigraphic framework for the WellboreIntervalSet. It demonstrates the intent to describe complex, potentially overlapping stratigraphic intervals. Only one of the properties StratigraphicColumnID or StratigraphicColumnRankInterpretationID should be populated.
+    """
+    StratigraphicColumnRankInterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-StratigraphicColumnRankInterpretation:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--StratigraphicColumnRankInterpretation:Gudrun-Rank2-:'
+        ],
+        title='Stratigraphic Column Rank Interpretation ID',
+    )
+    """
+    The optional reference to a StratigraphicColumnRankInterpretation. It expresses the intent of a stratigraphic framework with non-overlapping intervals. Only one of the properties StratigraphicColumnID or StratigraphicColumnRankInterpretationID should be populated.
+    """
+    Intervals: list[Interval] | None = Field(None, title='Intervals')
+    """
+    Array of Intervals, index-aligned with IntervalProperties.
+    """
+    IntervalProperties: v1_2_0.AbstractColumnBasedTable | None = Field(
+        None, title='Interval Property Values'
+    )
+    """
+    An embedded ColumnBasedTable with the properties including their values associated to the intervals in data.Intervals[]. The association is done by array index.
+    """
+    TimeSeries: v1_0_0_1.AbstractTimeSeriesLink | None = Field(
+        None, title='Time Series'
+    )
+    """
+    Allows to link the geometry of the WellboreMarkerSet to a particular index of a time series. This is particularly useful for intervals referring to fluid contacts where the topology and geometry varies against the time.
+    """
+    ExtensionProperties: dict[str, Any] | None = None