osdu-python-models 0.5.0__py3-none-any.whl

osdu_models/workproductcomponent/wellbore_marker_set/v1_5_0.py

@@ -0,0 +1,209 @@
+# generated by datamodel-codegen:
+#   filename:  workproductcomponent/wellbore_marker_set/v1_5_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_column_based_table import v1_2_0
+from ...abstract.abstract_time_series_link import v1_0_0 as v1_0_0_1
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_wpcgroup_type.v1_2_0 import AbstractWPCGroupType
+from ...abstract.abstract_work_product_component.v1_1_0 import (
+    AbstractWorkProductComponent,
+)
+
+
+class AvailableMarkerProperty(BaseModel):
+    """
+    A set of properties describing a marker property which is available for this instance of a WellboreMarkerSet.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    MarkerPropertyTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-MarkerPropertyType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['partition-id:reference-data--MarkerPropertyType:MissingThickness:'],
+        title='Marker Property Type ID',
+    )
+    """
+    The reference to a marker property type - or if interpreted as CSV columns, the 'well-known column type. It is a relationship to a reference-data--MarkerPropertyType record id.
+    """
+    MarkerPropertyUnitID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['partition-id:reference-data--UnitOfMeasure:ft:'],
+        title='Marker Property Unit ID',
+    )
+    """
+    Unit of Measure for the marker properties of type MarkerPropertyType.
+    """
+    Name: str | None = Field(None, examples=['MissingThickness'], title='Name')
+    """
+    The name of the marker property (e.g. column in a CSV document) as originally found. If absent The name of the MarkerPropertyType is intended to be used.
+    """
+
+
+class Marker(BaseModel):
+    """
+    The array of marker meta data in this set.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    MarkerName: str | None = None
+    """
+    Name of the Marker
+    """
+    MarkerID: str | None = Field(None, title='Marker ID')
+    """
+    A unique identifier of the marker in the list of data.Markers[], ideally a UUID. If unpopulated, the string-converted element index number is used. The first index is "0". MarkerID is also used to associate MarkerProperties via the key column data.MarkerProperties.ColumnValues[0].StringColumn[].
+    """
+    InterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:(work-product-component\-\-HorizonInterpretation|work-product-component\-\-FaultInterpretation|work-product-component\-\-GeobodyBoundaryInterpretation):[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Interpretation ID')
+    """
+    The optional relationship to a HorizonInterpretation, GeobodyBoundaryInterpretation or FaultInterpretation.
+    """
+    MarkerMeasuredDepth: float | None = None
+    """
+    The depth at which the Marker was noted.
+    """
+    MarkerSubSeaVerticalDepth: float | None = None
+    """
+    The Marker's TVD converted to a Sub-Sea Vertical depth, i.e., below Mean Sea Level. Note that TVD values above MSL are negative. This is the same as true vertical depth referenced to the vertical CRS “MSL depth”.
+    """
+    MarkerDate: str | None = None
+    """
+    Timestamp of the date and time when the when the Marker was interpreted.
+    """
+    MarkerObservationNumber: float | None = None
+    """
+    Any observation number that distinguishes a Marker observation from others with same Marker name, date.
+    """
+    MarkerInterpreter: str | None = None
+    """
+    The name of the Marker interpreter (could be a person or vendor).
+    """
+    MarkerTypeID: (
+        constr(pattern=r'^[\w\-\.]+:reference-data\-\-MarkerType:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = None
+    """
+    Marker Type Reference Type. Possible values - Biostratigraphy, Lithostratigraphy, seismic, depth of well, sequence, flow unit
+    """
+    FeatureTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-FeatureType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    Feature Type Reference Type. Possible values - Base, top, fault, salt, reef, sea floor
+    """
+    FeatureName: str | None = None
+    """
+    Name of the feature the marker is characterizing
+    """
+    PositiveVerticalDelta: float | None = None
+    """
+    The distance vertically above the Marker position that marks the limit of the high confidence range for the Marker pick.
+    """
+    NegativeVerticalDelta: float | None = None
+    """
+    The distance vertically below the Marker position that marks the limit of the high confidence range for the Marker pick.
+    """
+    SurfaceDipAngle: float | None = None
+    """
+    Dip angle for the Wellbore Marker.
+    """
+    SurfaceDipAzimuth: float | None = None
+    """
+    Dip azimuth for the Wellbore Marker.
+    """
+    Missing: str | None = None
+    """
+    The geologic reason why a portion of material (typically a rock formation) is missing from the real world material/rock being measured, compared to what was expected based on offset wells. Examples: fault, unconformity, fold. This property corresponds to marker property type reference-data--MarkerPropertyType:MissingReason.
+    """
+    GeologicalAge: str | None = None
+    """
+    Associated geological age
+    """
+
+
+class Data(OsduCommonResources, AbstractWPCGroupType, AbstractWorkProductComponent):
+    """
+    `data` payload for WellboreMarkerSet 1.5.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(None, title='Wellbore ID')
+    """
+    The Wellbore ID, to which the markers in this set belong.
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement | None = Field(
+        None, title='Vertical Measurement'
+    )
+    """
+    References an entry in the Vertical Measurement array for the Wellbore identified by WellboreID, which defines the vertical reference datum for all marker measured depths of the Wellbore Marker Set Markers array.
+    """
+    AvailableMarkerProperties: list[AvailableMarkerProperty] | None = Field(
+        None, title='Available Marker Properties'
+    )
+    """
+    The array of MarkerProperty definitions describing the available properties for this instance of WellboreMarkerSet.
+    """
+    Markers: list[Marker] | None = Field(None, title='Markers')
+    """
+    The array of marker meta data in this set. Markers are externally identified by data.Markers[].MarkerID, ideally a UUID. Older versions of the WellboreMarkerSet schema do not have this identifier. In this case, the string-converted array index is used as MarkerID. The the first index is "0".
+    """
+    StratigraphicColumnID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-StratigraphicColumn:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Stratigraphic Column ID')
+    """
+    The optional reference to a stratigraphic column (referring to multiple StratigraphicColumnRankInterpretation) providing the stratigraphic framework for the WellboreMarkerSet. It demonstrates the intent to describe complex, potentially overlapping stratigraphic intervals. Only one of the properties StratigraphicColumnID or StratigraphicColumnRankInterpretationID should be populated.
+    """
+    StratigraphicColumnRankInterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-StratigraphicColumnRankInterpretation:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Stratigraphic Column Rank ID')
+    """
+    The optional reference to a StratigraphicColumnRankInterpretation. It expresses the intent of a stratigraphic framework with non-overlapping intervals. Only one of the properties StratigraphicColumnID or StratigraphicColumnRankInterpretationID should be populated.
+    """
+    MarkerProperties: v1_2_0.AbstractColumnBasedTable | None = Field(
+        None, title='Marker Properties'
+    )
+    """
+    An embedded ColumnBasedTable with the properties including their values associated to the intervals in data.Markers[]. The association is done by array index.
+    """
+    TimeSeries: v1_0_0_1.AbstractTimeSeriesLink | None = Field(
+        None, title='Time Series'
+    )
+    """
+    Allows to link the geometry of the WellboreMarkerSet to a particular index of a time series. This is particularly useful for markers referring to fluid contacts where the topology and geometry varies against the time.
+    """
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/workproductcomponent/wellbore_marker_set/v1_5_1.py

@@ -0,0 +1,209 @@
+# generated by datamodel-codegen:
+#   filename:  workproductcomponent/wellbore_marker_set/v1_5_1.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_column_based_table import v1_2_1
+from ...abstract.abstract_time_series_link import v1_0_0 as v1_0_0_1
+from ...abstract.abstract_common_resources.v1_0_1 import OsduCommonResources
+from ...abstract.abstract_wpcgroup_type.v1_2_0 import AbstractWPCGroupType
+from ...abstract.abstract_work_product_component.v1_1_0 import (
+    AbstractWorkProductComponent,
+)
+
+
+class AvailableMarkerProperty(BaseModel):
+    """
+    A set of properties describing a marker property which is available for this instance of a WellboreMarkerSet.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    MarkerPropertyTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-MarkerPropertyType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['partition-id:reference-data--MarkerPropertyType:MissingThickness:'],
+        title='Marker Property Type ID',
+    )
+    """
+    The reference to a marker property type - or if interpreted as CSV columns, the 'well-known column type. It is a relationship to a reference-data--MarkerPropertyType record id.
+    """
+    MarkerPropertyUnitID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['partition-id:reference-data--UnitOfMeasure:ft:'],
+        title='Marker Property Unit ID',
+    )
+    """
+    Unit of Measure for the marker properties of type MarkerPropertyType.
+    """
+    Name: str | None = Field(None, examples=['MissingThickness'], title='Name')
+    """
+    The name of the marker property (e.g. column in a CSV document) as originally found. If absent The name of the MarkerPropertyType is intended to be used.
+    """
+
+
+class Marker(BaseModel):
+    """
+    The array of marker meta data in this set.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    MarkerName: str | None = None
+    """
+    Name of the Marker
+    """
+    MarkerID: str | None = Field(None, title='Marker ID')
+    """
+    A unique identifier of the marker in the list of data.Markers[], ideally a UUID. If unpopulated, the string-converted element index number is used. The first index is "0". MarkerID is also used to associate MarkerProperties via the key column data.MarkerProperties.ColumnValues[0].StringColumn[].
+    """
+    InterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:(work-product-component\-\-HorizonInterpretation|work-product-component\-\-FaultInterpretation|work-product-component\-\-GeobodyBoundaryInterpretation):[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Interpretation ID')
+    """
+    The optional relationship to a HorizonInterpretation, GeobodyBoundaryInterpretation or FaultInterpretation.
+    """
+    MarkerMeasuredDepth: float | None = None
+    """
+    The depth at which the Marker was noted.
+    """
+    MarkerSubSeaVerticalDepth: float | None = None
+    """
+    The Marker's TVD converted to a Sub-Sea Vertical depth, i.e., below Mean Sea Level. Note that TVD values above MSL are negative. This is the same as true vertical depth referenced to the vertical CRS “MSL depth”.
+    """
+    MarkerDate: str | None = None
+    """
+    Timestamp of the date and time when the when the Marker was interpreted.
+    """
+    MarkerObservationNumber: float | None = None
+    """
+    Any observation number that distinguishes a Marker observation from others with same Marker name, date.
+    """
+    MarkerInterpreter: str | None = None
+    """
+    The name of the Marker interpreter (could be a person or vendor).
+    """
+    MarkerTypeID: (
+        constr(pattern=r'^[\w\-\.]+:reference-data\-\-MarkerType:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = None
+    """
+    Marker Type Reference Type. Possible values - Biostratigraphy, Lithostratigraphy, seismic, depth of well, sequence, flow unit
+    """
+    FeatureTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-FeatureType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    Feature Type Reference Type. Possible values - Base, top, fault, salt, reef, sea floor
+    """
+    FeatureName: str | None = None
+    """
+    Name of the feature the marker is characterizing
+    """
+    PositiveVerticalDelta: float | None = None
+    """
+    The distance vertically above the Marker position that marks the limit of the high confidence range for the Marker pick.
+    """
+    NegativeVerticalDelta: float | None = None
+    """
+    The distance vertically below the Marker position that marks the limit of the high confidence range for the Marker pick.
+    """
+    SurfaceDipAngle: float | None = None
+    """
+    Dip angle for the Wellbore Marker.
+    """
+    SurfaceDipAzimuth: float | None = None
+    """
+    Dip azimuth for the Wellbore Marker.
+    """
+    Missing: str | None = None
+    """
+    The geologic reason why a portion of material (typically a rock formation) is missing from the real world material/rock being measured, compared to what was expected based on offset wells. Examples: fault, unconformity, fold. This property corresponds to marker property type reference-data--MarkerPropertyType:MissingReason.
+    """
+    GeologicalAge: str | None = None
+    """
+    Associated geological age
+    """
+
+
+class Data(OsduCommonResources, AbstractWPCGroupType, AbstractWorkProductComponent):
+    """
+    `data` payload for WellboreMarkerSet 1.5.1.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(None, title='Wellbore ID')
+    """
+    The Wellbore ID, to which the markers in this set belong.
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement | None = Field(
+        None, title='Vertical Measurement'
+    )
+    """
+    References an entry in the Vertical Measurement array for the Wellbore identified by WellboreID, which defines the vertical reference datum for all marker measured depths of the Wellbore Marker Set Markers array.
+    """
+    AvailableMarkerProperties: list[AvailableMarkerProperty] | None = Field(
+        None, title='Available Marker Properties'
+    )
+    """
+    The array of MarkerProperty definitions describing the available properties for this instance of WellboreMarkerSet.
+    """
+    Markers: list[Marker] | None = Field(None, title='Markers')
+    """
+    The array of marker meta data in this set. Markers are externally identified by data.Markers[].MarkerID, ideally a UUID. Older versions of the WellboreMarkerSet schema do not have this identifier. In this case, the string-converted array index is used as MarkerID. The the first index is "0".
+    """
+    StratigraphicColumnID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-StratigraphicColumn:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Stratigraphic Column ID')
+    """
+    The optional reference to a stratigraphic column (referring to multiple StratigraphicColumnRankInterpretation) providing the stratigraphic framework for the WellboreMarkerSet. It demonstrates the intent to describe complex, potentially overlapping stratigraphic intervals. Only one of the properties StratigraphicColumnID or StratigraphicColumnRankInterpretationID should be populated.
+    """
+    StratigraphicColumnRankInterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-StratigraphicColumnRankInterpretation:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Stratigraphic Column Rank ID')
+    """
+    The optional reference to a StratigraphicColumnRankInterpretation. It expresses the intent of a stratigraphic framework with non-overlapping intervals. Only one of the properties StratigraphicColumnID or StratigraphicColumnRankInterpretationID should be populated.
+    """
+    MarkerProperties: v1_2_1.AbstractColumnBasedTable | None = Field(
+        None, title='Marker Properties'
+    )
+    """
+    An embedded ColumnBasedTable with the properties including their values associated to the intervals in data.Markers[]. The association is done by array index.
+    """
+    TimeSeries: v1_0_0_1.AbstractTimeSeriesLink | None = Field(
+        None, title='Time Series'
+    )
+    """
+    Allows to link the geometry of the WellboreMarkerSet to a particular index of a time series. This is particularly useful for markers referring to fluid contacts where the topology and geometry varies against the time.
+    """
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/workproductcomponent/wellbore_trajectory/__init__.py

@@ -0,0 +1,2 @@
+# generated by datamodel-codegen:
+#   filename:  tmp4rfivwe4

osdu_models/workproductcomponent/wellbore_trajectory/v1_0_0.py

@@ -0,0 +1,136 @@
+# generated by datamodel-codegen:
+#   filename:  workproductcomponent/wellbore_trajectory/v1_0_0.json
+
+from __future__ import annotations
+from pydantic import ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_wpcgroup_type.v1_0_0 import AbstractWPCGroupType
+from ...abstract.abstract_work_product_component.v1_0_0 import (
+    AbstractWorkProductComponent,
+)
+
+
+class Data(OsduCommonResources, AbstractWPCGroupType, AbstractWorkProductComponent):
+    """
+    `data` payload for WellboreTrajectory 1.0.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ServiceCompanyID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Organisation:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(None, title='Service Company')
+    """
+    Name of the Survey Company.
+    """
+    WellboreID: constr(
+        pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Wellbore')
+    """
+    A unique name, code or number designated to the Wellbore.
+    """
+    TopDepthMeasuredDepth: float = Field(..., title='Survey Top Measured Depth')
+    """
+    Measured depth in wellbore where the directional survey starts. This should equal the minimum station measured depth for this directional survey, regardless of whether the surveyed station represents an actual surveyed MD or not.
+    """
+    AzimuthReferenceType: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-AzimuthReferenceType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Azimuth Reference Type')
+    """
+    The North reference of the trajectory used to define the azimuth angular measurement values. For example, True North, Grid North, Magnetic North.
+    """
+    CalculationMethodType: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-CalculationMethodType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Calculation Method Type')
+    """
+    Calculation Method Type used to compute the TVD, X OFFSET, Y OFFSET and DOG LEG SEVERITY values for this Directional Survey. For example, Radius of Curvature, Minimum Curvature, Balanced Tangential, etc.
+    """
+    ProjectedCRSID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-CoordinateReferenceSystem:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:reference-data--CoordinateReferenceSystem:Projected:EPSG::32615:'
+        ],
+        title='Projected Coordinate Reference System ID',
+    )
+    """
+    Coordinate Reference System defining the Projection of the station EASTING and NORTHING values. If  type is "Grid North" and EASTING and NORTHING attributes are stored, clearly identifying their projection is required.
+    """
+    ActiveIndicator: bool | None = Field(None, title='Active Survey Indicator')
+    """
+    A flag indicating if the survey is currently active or valid within his lifecycle stage, not necessarily the definitive survey.
+    """
+    SurveyType: str | None = Field(None, title='Directional Survey Type')
+    """
+    The type of this directional survey.  For example a "Directional Survey" where MD, Inclination and Azimuth are all measured or a "Position Log" where Inclination and Azimuth are both null and only MD, TVD and X/Y Offsets are available) - or "Full Survey" where everything is fully filled-up, depth-inclination-azimuth.
+    """
+    AcquisitionDate: str | None = Field(None, title='Effective Date')
+    """
+    The date that the survey data was acquired on the field.
+    """
+    GeographicCRSID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-CoordinateReferenceSystem:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:reference-data--CoordinateReferenceSystem:Geographic2D:EPSG::4326:'
+        ],
+        title='Geographic Coordinate Reference System',
+    )
+    """
+    Coordinate Reference System defining the Geodetic Datum of the station LATITUDE and LONGITUDE values. If LATITUDE and LONGITUDE attributes are stored, clearly identifying their Datum is required.
+    """
+    AcquisitionRemark: str | None = Field(None, title='Survey Remark')
+    """
+    Remarks related to acquisition context which is not the same as Description which is a summary of the work-product-component.
+    """
+    SurveyReferenceIdentifier: str | None = Field(
+        None, title='Survey Reference Identifier'
+    )
+    """
+    Unique or Distinctive Survey Reference Number, Job Number, File Number, Identifier, Label, Name, etc. as indicated on a directional survey report, file, etc.  Use this attribute to allow correlation of the data in this Directional Survey back to the original source document, file, etc.
+    """
+    SurveyToolTypeID: str | None = Field(None, title='Type of the Survey Tool')
+    """
+    The type of tool or equipment used to acquire this Directional Survey.  For example, gyroscopic, magnetic, MWD, TOTCO, acid bottle, etc. Follow OWSG reference data and support the ISCWSA survey tool definitions.
+    """
+    SurveyVersion: str | None = Field(None, title='Survey Version')
+    """
+    The version of the wellbore survey deliverable received from the service provider - as given by this provider
+    """
+    ExtrapolatedMeasuredDepth: float | None = Field(
+        None, title='Extrapolated Measured Depth'
+    )
+    """
+    The measured depth to which the survey segment was extrapolated.
+    """
+    BaseDepthMeasuredDepth: float = Field(..., title='Survey Base Measured Depth')
+    """
+    Measured depth within the wellbore of the LAST surveyed station with recorded data.  If a stored survey has been extrapolated to a deeper depth than the last surveyed station then that is the extrapolated measured depth and not the survey base depth.
+    """
+    TieMeasuredDepth: float | None = Field(None, title='Tie Measured Depth')
+    """
+    Tie-point depth measured along the wellbore from the measurement reference datum to the survey station - where tie point is the place on the originating survey where the current survey intersect it.
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement
+    """
+    References an entry in the Vertical Measurement array for the Wellbore identified by WellboreID, which defines the vertical reference datum for all survey station measured depths.
+    """
+    ExtensionProperties: dict[str, Any] | None = None