osdu-python-models 0.5.0__py3-none-any.whl

osdu_models/workproductcomponent/ppfgdataset/v1_1_0.py

@@ -0,0 +1,203 @@
+# generated by datamodel-codegen:
+#   filename:  workproductcomponent/ppfgdataset/v1_1_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_wpcgroup_type.v1_1_0 import AbstractWPCGroupType
+from ...abstract.abstract_work_product_component.v1_1_0 import (
+    AbstractWorkProductComponent,
+)
+
+
+class Curve(BaseModel):
+    """
+    Array of curve that constitutes the whole PPFG Dataset
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    CurveID: str | None = None
+    """
+    The ID of the PPFG Curve
+    """
+    CurveName: str | None = None
+    """
+    The original or as supplied PPFG curve name. Intended to hold historical or legacy information
+    """
+    CurveMainFamilyID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-PPFGCurveMainFamily:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    ID of the Main Family Type of the PPFG quantity measured, for example 'Pore Pressure'. Primarily used for high level curve classification
+    """
+    CurveFamilyID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-PPFGCurveFamily:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    ID of the PPFG Curve Family of the PPFG quantity measured, for example 'Pore Pressure from Corrected Drilling Exponent'. An individual curve that belongs to a Main Family
+    """
+    CurveFamilyMnemonicID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-PPFGCurveMnemonic:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    ID of the mnemonic of the Curve Family which is the value as received either from external providers or from internal processing team, for example 'PP DxC'
+    """
+    CurveProbabilityID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-PPFGCurveProbability:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    ID of the PPFG Curve probability, for example 'Most Likely Case' and 'P50'
+    """
+    CurveDataProcessingTypeIDs: (
+        list[
+            constr(
+                pattern=r'^[\w\-\.]+:reference-data\-\-PPFGCurveProcessingType:[\w\-\.\:\%]+:[0-9]*$'
+            )
+        ]
+        | None
+    ) = None
+    """
+    IDs of the type and level of processing that has been applied to the curve. An array of curve processing operations that have been applied, for example 'Smoothed', 'Calibrated', etc
+    """
+    CurveLithologyID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-PPFGCurveLithoType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    ID of the lithological unit represented by the curve
+    """
+    CurveTransformModelTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-PPFGCurveTransformModelType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    ID of the empirical calibrated model used for pressure calculations from a petrophysical curve (sonic or resistivity logs), for example 'Eaton' and  'Bowers',...
+    """
+    CurveUOM: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    Unit of Measure of the Physical Quantity Measured by the curve. An ID to relevant unit of measure reference
+    """
+
+
+class Data(OsduCommonResources, AbstractWPCGroupType, AbstractWorkProductComponent):
+    """
+    `data` payload for PPFGDataset 1.1.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Well:[\w\-\.\:\%]+:[0-9]*$') | None
+    ) = None
+    """
+    ID from the Well where the PPFG Work Product Component was recorded
+    """
+    WellboreID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = None
+    """
+    ID from the Wellbore where the PPFG Work Product Component was recorded
+    """
+    RecordDate: str | None = None
+    """
+    The date that the PPFG data set was created by the PPFG practitioner or contractor
+    """
+    ContextTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-PPFGContextType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    ID that reflects the context of the PPFG  data set, for example 'Pre-Drill' or 'Post-Drill'
+    """
+    ServiceCompanyID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Organisation:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = None
+    """
+    ID of the service Company that acquired the PPFG
+    """
+    Comment: str | None = None
+    """
+    Open comments from the calculation team
+    """
+    ReferenceWellTrajectoryID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-WellboreTrajectory:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    Id of the Reference WellTrajectory used for TVD's calculation
+    """
+    OffsetWellboreIDs: (
+        list[
+            constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        ]
+        | None
+    ) = None
+    """
+    IDs of the offset Wellbores included in the context and calculations of this PPFG data set
+    """
+    PrimaryReferenceCurveID: str | None = None
+    """
+    ID of the PPFG curve that is the primary reference or index. Derived from the PPFG curve ID
+    """
+    PrimaryReferenceType: str | None = None
+    """
+    The type of the primary reference, for example 'TVDSS',  'MD' , 'TWT'
+    """
+    AbsentValueCharacters: str | None = None
+    """
+    The characters that represent absent curve values in this data set, for example  '-999', 'NULL', '0', etc. Typically for legacy data
+    """
+    TectonicSetting: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-TectonicSettingType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    Tectonic Scenario Setting for Planning and Pore Pressure Practitioners. Built into interpretive curves. Can be, for example 'Strike Slip'
+    """
+    GaugeType: str | None = None
+    """
+    Free text to describe the type of gauge used for the pressure measurement
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement | None = None
+    """
+    The Vertical Measurement for the Wellbore identified which defines the vertical reference pressure datum for the related PPFG curves in this data set. The pressure datum is used to calculate the average pressure gradient in
+    """
+    Curves: list[Curve] | None = None
+    """
+    Array of curve that constitutes the whole PPFG Dataset
+    """
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/workproductcomponent/ppfgdataset/v1_2_0.py

@@ -0,0 +1,203 @@
+# generated by datamodel-codegen:
+#   filename:  workproductcomponent/ppfgdataset/v1_2_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_wpcgroup_type.v1_2_0 import AbstractWPCGroupType
+from ...abstract.abstract_work_product_component.v1_1_0 import (
+    AbstractWorkProductComponent,
+)
+
+
+class Curve(BaseModel):
+    """
+    Array of curve that constitutes the whole PPFG Dataset
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    CurveID: str | None = None
+    """
+    The ID of the PPFG Curve
+    """
+    CurveName: str | None = None
+    """
+    The original or as supplied PPFG curve name. Intended to hold historical or legacy information
+    """
+    CurveMainFamilyID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-PPFGCurveMainFamily:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    ID of the Main Family Type of the PPFG quantity measured, for example 'Pore Pressure'. Primarily used for high level curve classification
+    """
+    CurveFamilyID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-PPFGCurveFamily:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    ID of the PPFG Curve Family of the PPFG quantity measured, for example 'Pore Pressure from Corrected Drilling Exponent'. An individual curve that belongs to a Main Family
+    """
+    CurveFamilyMnemonicID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-PPFGCurveMnemonic:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    ID of the mnemonic of the Curve Family which is the value as received either from external providers or from internal processing team, for example 'PP DxC'
+    """
+    CurveProbabilityID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-PPFGCurveProbability:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    ID of the PPFG Curve probability, for example 'Most Likely Case' and 'P50'
+    """
+    CurveDataProcessingTypeIDs: (
+        list[
+            constr(
+                pattern=r'^[\w\-\.]+:reference-data\-\-PPFGCurveProcessingType:[\w\-\.\:\%]+:[0-9]*$'
+            )
+        ]
+        | None
+    ) = None
+    """
+    IDs of the type and level of processing that has been applied to the curve. An array of curve processing operations that have been applied, for example 'Smoothed', 'Calibrated', etc
+    """
+    CurveLithologyID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-PPFGCurveLithoType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    ID of the lithological unit represented by the curve
+    """
+    CurveTransformModelTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-PPFGCurveTransformModelType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    ID of the empirical calibrated model used for pressure calculations from a petrophysical curve (sonic or resistivity logs), for example 'Eaton' and  'Bowers',...
+    """
+    CurveUOM: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    Unit of Measure of the Physical Quantity Measured by the curve. An ID to relevant unit of measure reference
+    """
+
+
+class Data(OsduCommonResources, AbstractWPCGroupType, AbstractWorkProductComponent):
+    """
+    `data` payload for PPFGDataset 1.2.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Well:[\w\-\.\:\%]+:[0-9]*$') | None
+    ) = None
+    """
+    ID from the Well where the PPFG Work Product Component was recorded
+    """
+    WellboreID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = None
+    """
+    ID from the Wellbore where the PPFG Work Product Component was recorded
+    """
+    RecordDate: str | None = None
+    """
+    The date that the PPFG data set was created by the PPFG practitioner or contractor
+    """
+    ContextTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-PPFGContextType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    ID that reflects the context of the PPFG  data set, for example 'Pre-Drill' or 'Post-Drill'
+    """
+    ServiceCompanyID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Organisation:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = None
+    """
+    ID of the service Company that acquired the PPFG
+    """
+    Comment: str | None = None
+    """
+    Open comments from the calculation team
+    """
+    ReferenceWellTrajectoryID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-WellboreTrajectory:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    Id of the Reference WellTrajectory used for TVD's calculation
+    """
+    OffsetWellboreIDs: (
+        list[
+            constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        ]
+        | None
+    ) = None
+    """
+    IDs of the offset Wellbores included in the context and calculations of this PPFG data set
+    """
+    PrimaryReferenceCurveID: str | None = None
+    """
+    ID of the PPFG curve that is the primary reference or index. Derived from the PPFG curve ID
+    """
+    PrimaryReferenceType: str | None = None
+    """
+    The type of the primary reference, for example 'TVDSS',  'MD' , 'TWT'
+    """
+    AbsentValueCharacters: str | None = None
+    """
+    The characters that represent absent curve values in this data set, for example  '-999', 'NULL', '0', etc. Typically for legacy data
+    """
+    TectonicSetting: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-TectonicSettingType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    Tectonic Scenario Setting for Planning and Pore Pressure Practitioners. Built into interpretive curves. Can be, for example 'Strike Slip'
+    """
+    GaugeType: str | None = None
+    """
+    Free text to describe the type of gauge used for the pressure measurement
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement | None = None
+    """
+    The Vertical Measurement for the Wellbore identified which defines the vertical reference pressure datum for the related PPFG curves in this data set. The pressure datum is used to calculate the average pressure gradient in
+    """
+    Curves: list[Curve] | None = None
+    """
+    Array of curve that constitutes the whole PPFG Dataset
+    """
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/workproductcomponent/processed_in_sar/__init__.py

@@ -0,0 +1,2 @@
+# generated by datamodel-codegen:
+#   filename:  tmp4rfivwe4

osdu_models/workproductcomponent/processed_in_sar/v1_0_0.py

@@ -0,0 +1,223 @@
+# generated by datamodel-codegen:
+#   filename:  workproductcomponent/processed_in_sar/v1_0_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_wpcgroup_type.v1_0_0 import AbstractWPCGroupType
+from ...abstract.abstract_work_product_component.v1_1_0 import (
+    AbstractWorkProductComponent,
+)
+
+
+class AcquisitionDateRange(BaseModel):
+    """
+    Defines the start and end date of the processing completed on the dataset
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    StartDate: str | None = Field(None, title='Start Date')
+    """
+    Start date and time of images used  for processing
+    """
+    EndDate: str | None = Field(None, title='End Date')
+    """
+    end date and time of images used  for processing
+    """
+
+
+class Data(OsduCommonResources, AbstractWPCGroupType, AbstractWorkProductComponent):
+    """
+    `data` payload for ProcessedInSAR 1.0.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    AcquisitionSite: str | None = Field(
+        None, examples=['Gorgon'], title='Acquisition Site'
+    )
+    """
+    Acquisition site for the data capture area which is not any of the Country, Field or Basin properties which are all captured within the Geocontext for a work product component. The site should be used as an additional identifier for items such as prominent landmarks, facilities, processing plant or structures that identify the area of interest.
+    """
+    ApplicationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-InSARApplication:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:reference-data--InSARApplication:VegetationMonitoring:'],
+        title='Application',
+    )
+    """
+    Use or purpose of data acquisition. For example: Biomass estimation, Ship Detection, Vegetation monitoring, Geomorphology, CCS Storage monitoring, Oil & Gas field injection, Wellbore Casing Failure
+    """
+    ReferenceIdentifier: str | None = Field(
+        None, examples=['R-001'], title='ReferenceIdentifier'
+    )
+    """
+    Unique or distinctive Reference Number, Job Number, File Number, Identifier, Label, Name, etc as indicated on a report, file, etc.  
+    Use this to allow correlation of the data back to the original source document, file, etc
+    """
+    SatelliteMissionID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-SatelliteMission:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:reference-data--SatelliteMission:Sentinel:'],
+        title='Satellite Mission',
+    )
+    """
+    The name of the Satellite Mission that the individual Satellite belongs to. (See data.SatelliteName.) Examples include: Radarsat, Sentinel, COSMO-SkyMed, Kompsat
+    """
+    SatelliteName: str | None = Field(
+        None, examples=['Sentinel-1C'], title='Satellite Name'
+    )
+    """
+    Name of the individual satellite belonging to the Satellite Mission. (See data.SatelliteMissionID.)
+    Examples include: RADARSAT-1, SENTINEL-1C,  SENTINEL-1B, COSMO-4, CSG-3, KOMPSAT-6, RISAT-2B
+    """
+    Wavelength: float | None = Field(None, examples=[37.5], title='Wavelength')
+    """
+    The wavelength of the radar. This is related to the Frequency Band property (see data.FrequencyBandID). Examples include: 37.5, 50.5, 75
+    """
+    FrequencyBandID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-InSARFrequencyBand:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:reference-data--InSARFrequencyBand:X:'],
+        title='Frequency Band',
+    )
+    """
+    Image frequency band or resolution. For example: C / X / L / P. This is related to the wavelength. (See data.WavelengthID.)
+    """
+    SatelliteGeometryID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-SatelliteGeometry:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:reference-data--SatelliteGeometry:Ascending:'],
+        title='Satellite Geometry',
+    )
+    """
+    Geometry of the satellite which indicates the orbital path. For example in a Ascending geometry  the satellite is travelling North and imaging East. Descending is moving South and imaging West
+    """
+    ImagingModeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-InSARImageMode:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:reference-data--InSARImageMode:ScanSAR:'],
+        title='Imaging Mode ID',
+    )
+    """
+    Imaging mode utilised. For example: Stripmap, Spotlight, ScanSAR, etc
+    """
+    AcquisitionDateRanges: list[AcquisitionDateRange] | None = Field(
+        None, title='Acquisition Date Ranges'
+    )
+    """
+    An array which lists the start and end date of the acquisition data which is used as the input for the processing
+    """
+    NumberImages: int | None = Field(None, examples=[50], title='Number of Images')
+    """
+    Number of Images which have been captured in the time/date range which are used as the input for processing
+    """
+    ImageArea: float | None = Field(None, examples=[300.78], title='Area')
+    """
+    The area as unit of measure covered by the images which are input for the processing. Must be the same unit as the Measure point Density. Interdependent with number of measured points and  measure point density
+    """
+    MeasuredPoints: int | None = Field(None, examples=[386736], title='Measured Points')
+    """
+    Number of measured points in an Image Area. Interdependent with Image Area and Measure Point density.
+    """
+    MeasurePointDensity: float | None = Field(
+        None, examples=[1189.5], title='Measure Point Density'
+    )
+    """
+    Density of measured points in unit of measure. Must be the same unit as the Image Area. Interdependent with image area and number of measured points
+    """
+    ServiceCompanyID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Organisation:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:master-data--Organisation:Dolphin:'],
+        title='Service Company',
+    )
+    """
+    Company or organisation who processed the data
+    """
+    ProcessingTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-InSARProcessingType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:reference-data--InSARProcessingType:InSAR:'],
+        title='ProcessingType',
+    )
+    """
+    The type of processing used to produce the data set. For example: Coherence, Multilook, Interferometric SAR (InSAR), Differential (DInSAR), Polarimetric SAR (PolSAR), Polarimetric Interferometric SAR (PolInSAR), etc
+    """
+    PolarisationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-InSARPolarisation:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:reference-data--InSARPolarisation:VH:'],
+        title='Polarisation',
+    )
+    """
+    Polarisation captures the longitudinal wave in a single plane. Two are commonly used, Horizontal (H), Vertical (V)  and combinations of the two. One represents the transmission and the  other the receiver. For example: VV, VH, HH, HV
+    """
+    IncidenceAngle: float | None = Field(
+        None, examples=[21.76], title='Incidence Angle'
+    )
+    """
+    The single common angle or line of sight angle of the radiation on a flat horizontal terrain.
+    """
+    GroundResolution: float | None = Field(
+        None, examples=[1], title='Ground Resolution'
+    )
+    """
+    Horizontal resolution of the image. For example 1 metre or 10 meters
+    """
+    RawInSARID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-[\w\-\.]+:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Raw InSAR ID')
+    """
+    An association to the raw acquired InSAR work product component this image is derived
+    """
+    SatelliteRevisitTime: float | None = Field(
+        None, examples=[86400], title='Satellite Revisit Time'
+    )
+    """
+    Time for the satellite to complete orbit and revisit the image area reference point. Unit of measure is time (Seconds)
+    """
+    SurfaceReflectorCount: int | None = Field(
+        None, examples=[2], title='Surface Reflector Count'
+    )
+    """
+    The count of the surface reflectors in the image
+    """
+    ExtensionProperties: dict[str, Any] | None = None