osdu-python-models 0.5.0__py3-none-any.whl

osdu_models/masterdata/bharun/v1_2_0.py

@@ -0,0 +1,1357 @@
+# generated by datamodel-codegen:
+#   filename:  masterdata/bharun/v1_2_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_master.v1_2_0 import AbstractMaster
+from ...abstract.abstract_project.v1_0_0 import AbstractProject
+
+
+class PointsSource(BaseModel):
+    """
+    The definition of the points used as a source for each individual critical point, resulting from parameters set or observed during a BHA run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Name: str = Field(..., title='Name')
+    """
+    The name of the Source Indicator Type. For example Manual Input
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value at that point.
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit I D')
+    """
+    Unit of measure of the Value value
+    """
+    Description: str | None = Field(None, title='Description')
+    """
+    Description associated with the source indicator type.
+    """
+
+
+class PointItem(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class MaximumTorqueOnBottom(BaseModel):
+    """
+    The planned maximum torque while on bottom
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class PointItem35(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class MinimumTorqueOnBottom(BaseModel):
+    """
+    The planned minimum torque while on bottom
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem35] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class TorqueOnBottomGroup(BaseModel):
+    """
+    A group of parameters that refer to Torque on Bottom
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    MaximumTorqueOnBottom_1: MaximumTorqueOnBottom = Field(
+        ..., alias='MaximumTorqueOnBottom', title='Maximum Torque On Bottom'
+    )
+    """
+    The planned maximum torque while on bottom
+    """
+    MinimumTorqueOnBottom_1: MinimumTorqueOnBottom = Field(
+        ..., alias='MinimumTorqueOnBottom', title='Minimum Torque On Bottom'
+    )
+    """
+    The planned minimum torque while on bottom
+    """
+
+
+class PointItem36(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class MaximumRPM(BaseModel):
+    """
+    The planned maximum rotary speed for the run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem36] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class PointItem37(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class MinimumRPM(BaseModel):
+    """
+    The planned minimum rotary speed for the run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem37] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class PointItem38(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class RecommendedRPM(BaseModel):
+    """
+    The recommended rotary speed for the run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem38] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class PointItem39(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class DownHoleMaximumRPM(BaseModel):
+    """
+    The down-hole planned maximum rotary speed for the run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem39] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class PointItem40(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class DownHoleMinimumRPM(BaseModel):
+    """
+    The down-hole planned minimum rotary speed for the run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem40] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class PointItem41(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class DownHoleRecommendedRPM(BaseModel):
+    """
+    The down-hole recommended rotary speed for the run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem41] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class RPMGroup(BaseModel):
+    """
+    A group of parameters that refer to RPM (rotations per minute)
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    MaximumRPM_1: MaximumRPM | None = Field(
+        None, alias='MaximumRPM', title='Maximum RPM'
+    )
+    """
+    The planned maximum rotary speed for the run
+    """
+    MinimumRPM_1: MinimumRPM | None = Field(
+        None, alias='MinimumRPM', title='Minimum RPM'
+    )
+    """
+    The planned minimum rotary speed for the run
+    """
+    RecommendedRPM_1: RecommendedRPM | None = Field(
+        None, alias='RecommendedRPM', title='Recommended RPM'
+    )
+    """
+    The recommended rotary speed for the run
+    """
+    DownHoleMaximumRPM_1: DownHoleMaximumRPM | None = Field(
+        None, alias='DownHoleMaximumRPM', title='DownHole Maximum RPM'
+    )
+    """
+    The down-hole planned maximum rotary speed for the run
+    """
+    DownHoleMinimumRPM_1: DownHoleMinimumRPM | None = Field(
+        None, alias='DownHoleMinimumRPM', title='DownHole Minimum RPM'
+    )
+    """
+    The down-hole planned minimum rotary speed for the run
+    """
+    DownHoleRecommendedRPM_1: DownHoleRecommendedRPM | None = Field(
+        None, alias='DownHoleRecommendedRPM', title='DownHole Recommended RPM'
+    )
+    """
+    The down-hole recommended rotary speed for the run
+    """
+
+
+class PointItem42(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class MaximumROP(BaseModel):
+    """
+    The planned maximum rate of penetration for the run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem42] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class PointItem43(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class MinimumROP(BaseModel):
+    """
+    The planned minimum rate of penetration for the run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem43] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class PointItem44(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class RecommendedROP(BaseModel):
+    """
+    The recommended rate of penetration for the run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem44] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class ROPGroup(BaseModel):
+    """
+    A group of parameters that refer to ROP (rate of penetration)
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    MaximumROP_1: MaximumROP = Field(..., alias='MaximumROP', title='Maximum R.O.P.')
+    """
+    The planned maximum rate of penetration for the run
+    """
+    MinimumROP_1: MinimumROP = Field(..., alias='MinimumROP', title='Minimum R.O.P.')
+    """
+    The planned minimum rate of penetration for the run
+    """
+    RecommendedROP_1: RecommendedROP | None = Field(
+        None, alias='RecommendedROP', title='Recommended R.O.P.'
+    )
+    """
+    The recommended rate of penetration for the run
+    """
+
+
+class PointItem45(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class MaximumWOB(BaseModel):
+    """
+    The planned maximum weight on bit for this run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem45] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class PointItem46(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class MinimumWOB(BaseModel):
+    """
+    The planned minimum weight on bit for this run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem46] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class PointItem47(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class RecommendedWOB(BaseModel):
+    """
+    The recommended weight on bit for this run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem47] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class WOBGroup(BaseModel):
+    """
+    A group of parameters that refer to WOB (weight on bit)
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    MaximumWOB_1: MaximumWOB = Field(..., alias='MaximumWOB', title='Maximum W.O.B.')
+    """
+    The planned maximum weight on bit for this run
+    """
+    MinimumWOB_1: MinimumWOB = Field(..., alias='MinimumWOB', title='Minimum W.O.B.')
+    """
+    The planned minimum weight on bit for this run
+    """
+    RecommendedWOB_1: RecommendedWOB | None = Field(
+        None, alias='RecommendedWOB', title='Recommended W.O.B.'
+    )
+    """
+    The recommended weight on bit for this run
+    """
+
+
+class PointItem48(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class MaximumFlowratePump(BaseModel):
+    """
+    The planned maximum flowrate for the run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem48] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class PointItem49(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class MinimumFlowratePump(BaseModel):
+    """
+    The planned minimum flowrate for the run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem49] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class PointItem50(BaseModel):
+    """
+    The definition of the point
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    ObservationMeasuredDepth: float = Field(..., title='M D')
+    """
+    The measured depth at which the measurement was observed. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    Value: float = Field(..., title='Value')
+    """
+    The value observed at the measured depth
+    """
+    ValueUnitID: constr(
+        pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(..., title='Value Unit ID')
+    """
+    Unit of measure of the Value value
+    """
+    PointsSources: list[PointsSource] = Field(..., title='Points Sources')
+    """
+    The source indicator associated with this point.
+    """
+
+
+class RecommendedFlowratePump(BaseModel):
+    """
+    The recommended flowrate for the run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    Point: list[PointItem50] = Field(..., title='Point')
+    """
+    the pair of points associated with the parameter group.
+    """
+
+
+class FlowratePumpGroup(BaseModel):
+    """
+    A group of parameters that refer to flowrate
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    MaximumFlowratePump_1: MaximumFlowratePump = Field(
+        ..., alias='MaximumFlowratePump', title='Flowrate Pump Maximum'
+    )
+    """
+    The planned maximum flowrate for the run
+    """
+    MinimumFlowratePump_1: MinimumFlowratePump = Field(
+        ..., alias='MinimumFlowratePump', title='Flowrate Pump Minimum'
+    )
+    """
+    The planned minimum flowrate for the run
+    """
+    RecommendedFlowratePump_1: RecommendedFlowratePump | None = Field(
+        None, alias='RecommendedFlowratePump', title='Flowrate Pump Recommended'
+    )
+    """
+    The recommended flowrate for the run
+    """
+
+
+class OperationParameterPlan(BaseModel):
+    """
+    A series of operating parameters observed during the run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    RealizationStrategy: str = Field(
+        ..., examples=['linearInterpolation'], title='Realization Strategy'
+    )
+    """
+    The realization strategy utilized in this series of operation parameters
+    """
+    TorqueOnBottomGroup_1: TorqueOnBottomGroup = Field(
+        ..., alias='TorqueOnBottomGroup', title='Torque On Bottom Group'
+    )
+    """
+    A group of parameters that refer to Torque on Bottom
+    """
+    RPMGroup_1: RPMGroup = Field(..., alias='RPMGroup', title='R.P.M. Group')
+    """
+    A group of parameters that refer to RPM (rotations per minute)
+    """
+    ROPGroup_1: ROPGroup = Field(..., alias='ROPGroup', title='R.O.P. Group')
+    """
+    A group of parameters that refer to ROP (rate of penetration)
+    """
+    WOBGroup_1: WOBGroup = Field(..., alias='WOBGroup', title='W.O.B. Group')
+    """
+    A group of parameters that refer to WOB (weight on bit)
+    """
+    FlowratePumpGroup_1: FlowratePumpGroup = Field(
+        ..., alias='FlowratePumpGroup', title='Flowrate Pump Group'
+    )
+    """
+    A group of parameters that refer to flowrate
+    """
+
+
+class RunParameterPlan(BaseModel):
+    """
+    Operating parameters of a drill string run
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    RunStartHoleMeasuredDepth: float | None = Field(
+        None, title='Run-Start Hole Measured-Depth'
+    )
+    """
+    The start measured depth of the hole section at the start of the run. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    RunEndHoleMeasuredDepth: float | None = Field(
+        None, title='Run-End Hole Measured-Depth'
+    )
+    """
+    The end measured depth of the hole section at the end of the run. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    OperationParameterPlan_1: OperationParameterPlan | None = Field(
+        None, alias='OperationParameterPlan', title='Operation Parameter Plan'
+    )
+    """
+    A series of operating parameters observed during the run
+    """
+
+
+class DrillingParam(BaseModel):
+    """
+    The bottomhole assembly drilling parameters schema, which contains statistical and calculated operations data for the run, related to depths, activities, temperature, pressure, flow rates, torque, etc.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    BitRunTIme: str | None = Field(None, title='Operating Time Bit')
+    """
+    Operating time spent by bit for run.
+
+    BUSINESS RULE: When reporting an actual as opposed to design, this is required.
+    """
+    RunStartHoleMeasuredDepth: float | None = Field(
+        None, title='Measured Depth Hole Start'
+    )
+    """
+    Measured depth at start of the run.
+    """
+    RunEndHoleMeasuredDepth: float | None = Field(
+        None, title='Measured Depth Hole Stop'
+    )
+    """
+    Measured depth at the end of the run.
+    """
+    RotatingHookload: float | None = Field(None, title='Rotating Hookload')
+    """
+    Hookload rotating.
+    """
+    OverPull: float | None = Field(None, title='Over Pull')
+    """
+    Overpull = HookloadUp - HookloadRotating
+    """
+    SlackOff: float | None = Field(None, title='Slack Off')
+    """
+    Slackoff = HookloadRotating  - HookloadDown.
+    """
+    HookloadUp: float | None = Field(None, title='Hookload Up')
+    """
+    Hookload when the string is moving up.
+    """
+    HookloadDown: float | None = Field(None, title='Hookload Down')
+    """
+    Hookload when the string is moving down.
+    """
+    AverageTorqueOnBottom: float | None = Field(None, title='Average Torque On Bottom')
+    """
+    Average Torque: on bottom.
+    """
+    MaximumTorqueOnBottom: float | None = Field(None, title='Maximum Torque On Bottom')
+    """
+    Maximum torque: on bottom.
+    """
+    MinimumTorqueOnBottom: float | None = Field(None, title='Minimum Torque On Bottom')
+    """
+    Minimum torque: on bottom.
+    """
+    AverageTorqueOffBottom: float | None = Field(
+        None, title='Average Torque Off Bottom'
+    )
+    """
+    Average torque: off bottom.
+    """
+    AverageTorqueDownhole: float | None = Field(None, title='Average Torque Downhole')
+    """
+    Average torque: downhole.
+    """
+    WeightAboveJar: float | None = Field(None, title='Weight Above Jar')
+    """
+    Weight of the string above the jars.
+    """
+    WeightBelowJar: float | None = Field(None, title='Weight Below Jar')
+    """
+    Weight  of the string below the jars.
+    """
+    WeightMud: float | None = Field(None, title='Weight Mud')
+    """
+    Drilling fluid density.
+    """
+    AverageFlowratePump: float | None = Field(None, title='Average Flowrate Pump')
+    """
+    Average mud pump flow rate.
+    """
+    MaximumFlowratePump: float | None = Field(None, title='Maximum Flowrate Pump')
+    """
+    Maximum mud pump flow rate.
+    """
+    MinimumFlowratePump: float | None = Field(None, title='Minimum Flowrate Pump')
+    """
+    Minimum mud pump flow rate.
+    """
+    AverageVelocityBitNozzle: float | None = Field(
+        None, title='Average Velocity Nozzle'
+    )
+    """
+    Bit nozzle average velocity.
+    """
+    PowerBit: float | None = Field(None, title='Power Bit')
+    """
+    Bit hydraulic.
+    """
+    PressureDropBit: float | None = Field(None, title='Pressure Drop Bit')
+    """
+    Pressure drop in bit.
+    """
+    TimeHolding: float | None = Field(None, title='Cumulative Time Hold')
+    """
+    Time spent on hold from start of bit run.
+    """
+    TimeSteering: float | None = Field(None, title='Cumulative Time Steering')
+    """
+    Time spent steering from start of bit run.
+    """
+    TimeDrillingRotating: float | None = Field(
+        None, title='Cumulative Time Drill Rotating'
+    )
+    """
+    Time spent rotary drilling from start of bit run.
+    """
+    TimeDrillingSliding: float | None = Field(
+        None, title='Cumulative Time Drill Sliding'
+    )
+    """
+    Time spent slide drilling from start of bit run.
+    """
+    TimeCirculating: float | None = Field(None, title='Cumulative Time Circulating')
+    """
+    Time spent circulating from start of bit run.
+    """
+    TimeReaming: float | None = Field(None, title='Cumulative Time Reaming')
+    """
+    Time spent reaming from start of bit run.
+    """
+    DistanceDrilledRotating: float | None = Field(None, title='Distance Drill Rotating')
+    """
+    Distance drilled - rotating.
+    """
+    DistanceDrilledSliding: float | None = Field(None, title='Distance Drill Sliding')
+    """
+    Distance drilled - sliding
+    """
+    DistanceReamed: float | None = Field(None, title='Distance Reaming')
+    """
+    Distance reamed.
+    """
+    DistanceHolding: float | None = Field(None, title='Distance Holding')
+    """
+    Distance covered while holding angle with a steerable drilling assembly.
+    """
+    DistanceSteering: float | None = Field(None, title='Distance Steering')
+    """
+    Distance covered while actively steering with a steerable drilling assembly.
+    """
+    AverageRpm: float | None = Field(None, title='Rpm Average')
+    """
+    Average surface turn rate (commonly in rpm) through Interval.
+    """
+    MaximumRpm: float | None = Field(None, title='Rpm Max')
+    """
+    Maximum turn rate (commonly in rpm).
+    """
+    MinimumRpm: float | None = Field(None, title='Rpm Min')
+    """
+    Minimum turn rate (commonly in rpm).
+    """
+    AverageRpmDownhole: float | None = Field(None, title='Rpm Average Downhole')
+    """
+    Average turn rate (commonly in rpm) downhole.
+    """
+    AverageROP: float | None = Field(None, title='Rop Average')
+    """
+    Average rate of penetration through Interval.
+    """
+    MaximumROP: float | None = Field(None, title='Rop Max')
+    """
+    Maximum rate of penetration through Interval.
+    """
+    MinimumROP: float | None = Field(None, title='Rop Min')
+    """
+    Minimum rate of penetration through Interval.
+    """
+    AverageWOB: float | None = Field(None, title='Wob Average')
+    """
+    Surface weight on bit - average through interval.
+    """
+    MaximumWOB: float | None = Field(None, title='Wob Max')
+    """
+    Weight on bit - maximum.
+    """
+    MinimumWOB: float | None = Field(None, title='Wob Min')
+    """
+    Weight on bit - minimum.
+    """
+    AverageWOBDownhole: float | None = Field(None, title='Average Downhole WOB')
+    """
+    Weight on bit - average downhole.
+    """
+    AzimuthTop: float | None = Field(None, title='Azimuth Top')
+    """
+    Azimuth at start measured depth.
+    """
+    AzimuthBottom: float | None = Field(None, title='Azimuth Bottom')
+    """
+    Azimuth at stop measured depth.
+    """
+    InclinationStart: float | None = Field(None, title='Inclination Start')
+    """
+    Inclination at start measured depth.
+    """
+    MaximumInclination: float | None = Field(None, title='Inclination Max')
+    """
+    Maximum inclination.
+    """
+    MinimumInclination: float | None = Field(None, title='Inclination Min')
+    """
+    Minimum inclination.
+    """
+    InclinationStop: float | None = Field(None, title='Inclination Stop')
+    """
+    Inclination at stop measured depth.
+    """
+    MaximumMudTemperatureDownhole: float | None = Field(
+        None, title='Maximum Mud Temperature Downhole'
+    )
+    """
+    Maximum mud temperature downhole during run.
+    """
+    MinimumPumpPressure: float | None = Field(None, title='Minimum Pump Pressure')
+    """
+    The minimum pump pressure used during the run
+    """
+    MaximumPumpPressure: float | None = Field(None, title='Maximum Pump Pressure')
+    """
+    The maximum pump pressure used during the run
+    """
+    AveragePumpPressure: float | None = Field(None, title='Average Pump Pressure')
+    """
+    The average pump pressure used during the run
+    """
+    MinimumBitFlowrate: float | None = Field(None, title='Minimum Bit Flowrate')
+    """
+    The minimum flowrate at the bit during the run
+    """
+    MaximumBitFlowrate: float | None = Field(None, title='Maximum Bit Flowrate')
+    """
+    The maximum flowrate at the bit during the run
+    """
+    AverageBitFlowrate: float | None = Field(None, title='Average Bit Flowrate')
+    """
+    The average flowrate at the bit during the run
+    """
+    MudClass: (
+        constr(pattern=r'^[\w\-\.]+:reference-data\-\-MudClass:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(None, title='Mud Class')
+    """
+    The class of the drilling fluid.
+    """
+    Comments: str | None = Field(None, title='Comments')
+    """
+    Comments and remarks.
+    """
+
+
+class Data(OsduCommonResources, AbstractMaster, AbstractProject):
+    """
+    `data` payload for BHARun 1.2.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(None, title='Wellbore ID')
+    """
+    Unique identifier for the wellbore.  This uniquely represents
+    				the wellbore referenced by the (possibly non-unique) nameWellbore.
+    """
+    Name: str = Field(..., title='Name')
+    """
+    Human recognizable context for the run.
+    """
+    TubularID: constr(
+        pattern=r'^[\w\-\.]+:(master-data\-\-TubularAssembly|work-product-component\-\-TubularAssembly):[\w\-\.\:\%]+:[0-9]*$'
+    ) = Field(
+        ...,
+        examples=['namespace:master-data--TubularAssembly:9_58ProdCasing:'],
+        title='Tubular ID',
+    )
+    """
+    This represents a foreign key to the tubular (assembly) 
+    					that was utilized in this run.
+    """
+    HoleSectionID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-HoleSection:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(None, title='Hole Section ID')
+    """
+    This represents a foreign key to the Hole Section in which this BHA Run was performed.
+    """
+    ActivityStartDateTime: str | None = Field(None, title='Activity Start Date-Time')
+    """
+    Date and time that activities started.
+    """
+    ActivityStopDateTime: str | None = Field(None, title='Activity Stop Date-Time')
+    """
+    Date and time that activities stopped.
+    """
+    DrillingStartDateTime: str | None = Field(None, title='Drilling Start Date-Time')
+    """
+    Start on bottom - date and time.
+    """
+    DrillingStopDateTime: str | None = Field(None, title='Drilling Stop Date-Time')
+    """
+    Start off bottom - date and time.
+    """
+    Dogleg: float | None = Field(None, title='Dogleg')
+    """
+    Dogleg severity.
+    """
+    MaximumDogleg: float | None = Field(None, title='Dogleg Maximum')
+    """
+    Dogleg severity - Maximum.
+    """
+    StatusBhaID: (
+        constr(pattern=r'^[\w\-\.]+:reference-data\-\-BhaStatus:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(None, title='Status Bha')
+    """
+    Bottom hole assembly status.
+    """
+    BitRunNumber: str | None = Field(None, title='Bit Run Number')
+    """
+    Bit run number.
+    """
+    StringRunNumber: float | None = Field(None, title='String Run Number')
+    """
+    The BHA (drilling string) run number.
+    """
+    TripReasonID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-ReasonTripType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Trip Reason ID')
+    """
+    Reason for trip.
+    """
+    ObjectiveBha: str | None = Field(None, title='Objective Bha')
+    """
+    Objective of bottom hole assembly.
+    """
+    RunParameterPlans: list[RunParameterPlan] | None = Field(
+        None, title='Run Parameter Plans'
+    )
+    """
+    Identifiers of the associated run parameter plans.
+    """
+    RunComment: str | None = Field(None, title='Run Comment')
+    """
+    Free text allowing any comment associated to the run
+    """
+    MeasuredDepthRunStart: float | None = Field(None, title='Measured Depth Run Start')
+    """
+    Measured depth at run start. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    MeasuredDepthRunStop: float | None = Field(None, title='Measured Depth Run Stop')
+    """
+    Measured depth at run stop. Depth relative to Planned wellbore ZDP. Navigate via WellboreID to the side-car WellPlanningWellbore, which holds the depth reference in data.VerticalMeasurement.
+    """
+    HoleDiameter: float | None = Field(None, title='Hole Diameter')
+    """
+    Diameter of the hole
+    """
+    WtAboveJar: float | None = Field(None, title='Weight Above Jar')
+    """
+    Desired weight to be placed above the Jar - to optimize its efficiency
+    """
+    WtBelowJar: float | None = Field(None, title='Weight Below Jar')
+    """
+    Desired weight to be placed blow the Jar - to optimize its efficiency
+    """
+    DrillingParams: list[DrillingParam] | None = Field(
+        None, title='Drilling Parameters'
+    )
+    """
+    The parameters that were used during the BHA run
+    """
+    ExtensionProperties: dict[str, Any] | None = None