osdu-python-models 0.5.0__py3-none-any.whl

osdu_models/workproductcomponent/wellbore_interval_set/v1_3_1.py

@@ -0,0 +1,229 @@
+# generated by datamodel-codegen:
+#   filename:  workproductcomponent/wellbore_interval_set/v1_3_1.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_column_based_table import v1_2_1
+from ...abstract.abstract_time_series_link import v1_0_0 as v1_0_0_1
+from ...abstract.abstract_common_resources.v1_0_1 import OsduCommonResources
+from ...abstract.abstract_wpcgroup_type.v1_2_0 import AbstractWPCGroupType
+from ...abstract.abstract_work_product_component.v1_1_0 import (
+    AbstractWorkProductComponent,
+)
+
+
+class Interval(BaseModel):
+    """
+    An interval given either by relationships to top/base markers or standalone top/base depths. To avoid confusion about entry and exit depths the naming convention uses Start as the entry point of the well path into the geologic unit and Stop as the exit point. For unfolded geologic units and vertical wellbores Start is Top and Stop is Base.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    IntervalID: str | None = Field(
+        None, examples=['ba829e6d-30e0-4375-906c-4e7c62c9f7ec'], title='Interval ID'
+    )
+    """
+    The unique identifier of the interval array member in the data.Intervals[] array. Ideally a UUID. IntervalID is also used to associate IntervalProperties via the key column data.IntervalProperties.ColumnValues[0].StringColumn[].
+    """
+    GeologicUnitInterpretationIDs: (
+        list[
+            constr(
+                pattern=r'^[\w\-\.]+:(work-product-component\-\-StratigraphicUnitInterpretation|work-product-component\-\-GeobodyInterpretation|work-product-component\-\-RockFluidUnitInterpretation):[\w\-\.\:\%]+:[0-9]*$'
+            )
+        ]
+        | None
+    ) = Field(
+        None,
+        examples=[
+            [
+                'partition-id:work-product-component--StratigraphicUnitInterpretation:Draupne-:'
+            ]
+        ],
+        title='Interpretation Ids',
+    )
+    """
+    An array of StratigraphicUnitInterpretation, GeobodyInterpretation or RockFluidUnitInterpretation record Ids associated to this interval.
+    """
+    StartMeasuredDepth: float | None = Field(
+        None, examples=[4049], title='Start Interval Measured Depth'
+    )
+    """
+    The minimal MeasuredDepth of the interval. In the most common case this is the top.  If this value is associated with a marker then this value is a denormalization of data.Markers[].MarkerMeasuredDepth where the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StartSubSeaVerticalDepth: float | None = Field(
+        None, examples=[4030.9], title='Start Sub-Sea Vertical Depth'
+    )
+    """
+    True vertical depth sub-sea of the start of the interval. This is the same as true vertical depth referenced to the vertical CRS "MSL depth". If the start of the interval is associated with a marker then this value is a denormalization of data.Markers[].MarkerSubSeaVerticalDepth where the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StartIntervalName: str | None = Field(
+        None, examples=['Top-Draupne'], title='Start Interval Marker Name'
+    )
+    """
+    Name of the interval start (typically the top); when associated with a marker in a WellboreMarkerSet then this name is a denormalization of data.Markers[].MarkerName where the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StartMarkerSetID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-WellboreMarkerSet:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--WellboreMarkerSet:15-3-7-SingleRank-:'
+        ],
+        title='Start Interval WellboreMarkerSet ID',
+    )
+    """
+    Optional reference to the WellboreMarkerSet containing the interval start (typically the top), with MarkerID equals StartMarkerID.
+    """
+    StartMarkerID: str | None = Field(
+        None,
+        examples=['a580a3bb-c2db-4845-bbc1-050b417307c0'],
+        title='Start Interval Marker ID',
+    )
+    """
+    Individual markers are not globally identifiable. TopMarkerID is the unique id (MarkerID) of the top interval marker (typically the interval base) in the data.Markers[] array where the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StartBoundaryInterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:(work-product-component\-\-HorizonInterpretation|work-product-component\-\-GeobodyBoundaryInterpretation|work-product-component\-\-FaultInterpretation):[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--HorizonInterpretation:Top-Draupne-:'
+        ],
+        title='Start Interval Boundary Interpretation ID',
+    )
+    """
+    The optional relationship to a HorizonInterpretation, GeobodyBoundaryInterpretation or FaultInterpretation. If the interval start (typically the top) is associated with a marker, this is considered a denormalization of the data.Markers[].InterpretationID for the data.Markers[].MarkerID equals to StartMarkerID.
+    """
+    StopMeasuredDepth: float | None = Field(
+        None, examples=[4502], title='Stop Interval Measured Depth'
+    )
+    """
+    The maximum MeasuredDepth of the interval (typically the base). If the interval stop is associated with a marker then this value is a denormalization of data.Markers[].MarkerMeasuredDepth where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+    StopSubSeaVerticalDepth: float | None = Field(
+        None, examples=[4483.8], title='Stop Sub-Sea Vertical Depth'
+    )
+    """
+    True vertical depth sub-sea of the interval stop (typically the base). This is the same as true vertical depth referenced to the vertical CRS "MSL depth". If the interval stop is associated with a marker then this value is a denormalization of data.Markers[].MarkerSubSeaVerticalDepth where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+    StopIntervalName: str | None = Field(
+        None, examples=['Top-Heather'], title='Stop Interval Marker Name'
+    )
+    """
+    Name of the interval stop (typically the base); when associated with a marker in a WellboreMarkerSet then this name is a denormalization of data.Markers[].MarkerName where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+    StopMarkerSetID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-WellboreMarkerSet:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--WellboreMarkerSet:15-3-7-SingleRank-:'
+        ],
+        title='Stop Interval WellboreMarkerSet ID',
+    )
+    """
+    Optional reference to the WellboreMarkerSet containing the top with MarkerID equals StopMarkerID.
+    """
+    StopMarkerID: str | None = Field(
+        None,
+        examples=['7699229b-36e8-4aed-884f-a1e844e5b9d7'],
+        title='Stop Interval Marker ID',
+    )
+    """
+    Individual markers are not globally identifiable. StopMarkerID is the unique id (MarkerID) of the interval stop (typically the interval base) in the data.Markers[] array where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+    StopBoundaryInterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:(work-product-component\-\-HorizonInterpretation|work-product-component\-\-GeobodyBoundaryInterpretation|work-product-component\-\-FaultInterpretation):[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--HorizonInterpretation:Top-Heather-:'
+        ],
+        title='Stop Interval Boundary Interpretation ID',
+    )
+    """
+    The optional relationship to a HorizonInterpretation, GeobodyBoundaryInterpretation or FaultInterpretation. If the interval stop (typically the base) is associated with a marker, this is considered a denormalization of the data.Markers[].InterpretationID where the data.Markers[].MarkerID equals to StopMarkerID.
+    """
+
+
+class Data(OsduCommonResources, AbstractWPCGroupType, AbstractWorkProductComponent):
+    """
+    `data` payload for WellboreIntervalSet 1.3.1.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(
+        None,
+        examples=['namespace:master-data--Wellbore:NPD-4055:'],
+        title='Wellbore ID',
+    )
+    """
+    The relationship to a Wellbore, to which this WellboreIntervalSet is associated with.
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement | None = Field(
+        None, title='Vertical Measurement'
+    )
+    """
+    References an entry in the Vertical Measurement array for the Wellbore identified by WellboreID, which defines the vertical reference datum for all marker measured depths of the WellboreIntervalSet Intervals array. It is strongly recommended specifying the VerticalMeasurement.WellboreTVDTrajectoryID  when SubSeaVerticalDepth are populated for the intervals.
+    """
+    StratigraphicColumnID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-StratigraphicColumn:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Stratigraphic Column ID')
+    """
+    The optional reference to a stratigraphic column (referring to multiple StratigraphicColumnRankInterpretation) providing the stratigraphic framework for the WellboreIntervalSet. It demonstrates the intent to describe complex, potentially overlapping stratigraphic intervals. Only one of the properties StratigraphicColumnID or StratigraphicColumnRankInterpretationID should be populated.
+    """
+    StratigraphicColumnRankInterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-StratigraphicColumnRankInterpretation:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=[
+            'namespace:work-product-component--StratigraphicColumnRankInterpretation:Gudrun-Rank2-:'
+        ],
+        title='Stratigraphic Column Rank Interpretation ID',
+    )
+    """
+    The optional reference to a StratigraphicColumnRankInterpretation. It expresses the intent of a stratigraphic framework with non-overlapping intervals. Only one of the properties StratigraphicColumnID or StratigraphicColumnRankInterpretationID should be populated.
+    """
+    Intervals: list[Interval] | None = Field(None, title='Intervals')
+    """
+    Array of Intervals, index-aligned with IntervalProperties.
+    """
+    IntervalProperties: v1_2_1.AbstractColumnBasedTable | None = Field(
+        None, title='Interval Property Values'
+    )
+    """
+    An embedded ColumnBasedTable with the properties including their values associated to the intervals in data.Intervals[]. The association is done by array index.
+    """
+    TimeSeries: v1_0_0_1.AbstractTimeSeriesLink | None = Field(
+        None, title='Time Series'
+    )
+    """
+    Allows to link the geometry of the WellboreMarkerSet to a particular index of a time series. This is particularly useful for intervals referring to fluid contacts where the topology and geometry varies against the time.
+    """
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/workproductcomponent/wellbore_marker_set/__init__.py

@@ -0,0 +1,2 @@
+# generated by datamodel-codegen:
+#   filename:  tmp4rfivwe4

osdu_models/workproductcomponent/wellbore_marker_set/v1_0_0.py

@@ -0,0 +1,102 @@
+# generated by datamodel-codegen:
+#   filename:  workproductcomponent/wellbore_marker_set/v1_0_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_wpcgroup_type.v1_0_0 import AbstractWPCGroupType
+from ...abstract.abstract_work_product_component.v1_0_0 import (
+    AbstractWorkProductComponent,
+)
+
+
+class Marker(BaseModel):
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    MarkerName: str | None = None
+    """
+    Name of the Marker
+    """
+    MarkerMeasuredDepth: float | None = None
+    """
+    The depth at which the Marker was noted.
+    """
+    MarkerDate: str | None = None
+    """
+    Timestamp of the date and time when the when the Marker was interpreted.
+    """
+    MarkerObservationNumber: float | None = None
+    """
+    Any observation number that distinguishes a Marker observation from others with same Marker name, date.
+    """
+    MarkerInterpreter: str | None = None
+    """
+    The name of the Marker interpreter (could be a person or vendor).
+    """
+    MarkerTypeID: (
+        constr(pattern=r'^[\w\-\.]+:reference-data\-\-MarkerType:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = None
+    """
+    Marker Type Reference Type. Possible values - Biostratigraphy, Lithostratigraphy, seismic, depth of well, sequence, flow unit
+    """
+    FeatureTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-FeatureType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    Feature Type Reference Type. Possible values - Base, top, fault, salt, reef, sea floor
+    """
+    FeatureName: str | None = None
+    """
+    Name of the feature the marker is characterizing
+    """
+    PositiveVerticalDelta: float | None = None
+    """
+    The distance vertically above the Marker position that marks the limit of the high confidence range for the Marker pick.
+    """
+    NegativeVerticalDelta: float | None = None
+    """
+    The distance vertically below the Marker position that marks the limit of the high confidence range for the Marker pick.
+    """
+    SurfaceDipAngle: float | None = None
+    """
+    Dip angle for the Wellbore Marker.
+    """
+    SurfaceDipAzimuth: float | None = None
+    """
+    Dip azimuth for the Wellbore Marker.
+    """
+    Missing: str | None = None
+    GeologicalAge: str | None = None
+    """
+    Associated geological age
+    """
+
+
+class Data(OsduCommonResources, AbstractWPCGroupType, AbstractWorkProductComponent):
+    """
+    `data` payload for WellboreMarkerSet 1.0.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = None
+    """
+    Wellbore ID
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement | None = None
+    """
+    References an entry in the Vertical Measurement array for the Wellbore identified by WellboreID, which defines the vertical reference datum for all marker measured depths of the Wellbore Marker Set Markers array.
+    """
+    Markers: list[Marker] | None = None
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/workproductcomponent/wellbore_marker_set/v1_1_0.py

@@ -0,0 +1,157 @@
+# generated by datamodel-codegen:
+#   filename:  workproductcomponent/wellbore_marker_set/v1_1_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_wpcgroup_type.v1_0_0 import AbstractWPCGroupType
+from ...abstract.abstract_work_product_component.v1_0_0 import (
+    AbstractWorkProductComponent,
+)
+
+
+class AvailableMarkerProperty(BaseModel):
+    """
+    A set of properties describing a marker property which is available for this instance of a WellboreMarkerSet.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    MarkerPropertyTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-MarkerPropertyType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['partition-id:reference-data--MarkerPropertyType:MissingThickness:'],
+        title='Marker Property Type ID',
+    )
+    """
+    The reference to a marker property type - or if interpreted as CSV columns, the 'well-known column type. It is a relationship to a reference-data--MarkerPropertyType record id.
+    """
+    MarkerPropertyUnitID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['partition-id:reference-data--UnitOfMeasure:ft:'],
+        title='Marker Property Unit ID',
+    )
+    """
+    Unit of Measure for the marker properties of type MarkerPropertyType.
+    """
+    Name: str | None = Field(None, examples=['MissingThickness'], title='Name')
+    """
+    The name of the marker property (e.g. column in a CSV document) as originally found. If absent The name of the MarkerPropertyType is intended to be used.
+    """
+
+
+class Marker(BaseModel):
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    MarkerName: str | None = None
+    """
+    Name of the Marker
+    """
+    MarkerMeasuredDepth: float | None = None
+    """
+    The depth at which the Marker was noted.
+    """
+    MarkerSubSeaVerticalDepth: float | None = None
+    """
+    The Marker's TVD converted to a Sub-Sea Vertical depth, i.e., below Mean Sea Level. Note that TVD values above MSL are negative. This is the same as true vertical depth referenced to the vertical CRS “MSL depth”.
+    """
+    MarkerDate: str | None = None
+    """
+    Timestamp of the date and time when the when the Marker was interpreted.
+    """
+    MarkerObservationNumber: float | None = None
+    """
+    Any observation number that distinguishes a Marker observation from others with same Marker name, date.
+    """
+    MarkerInterpreter: str | None = None
+    """
+    The name of the Marker interpreter (could be a person or vendor).
+    """
+    MarkerTypeID: (
+        constr(pattern=r'^[\w\-\.]+:reference-data\-\-MarkerType:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = None
+    """
+    Marker Type Reference Type. Possible values - Biostratigraphy, Lithostratigraphy, seismic, depth of well, sequence, flow unit
+    """
+    FeatureTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-FeatureType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    Feature Type Reference Type. Possible values - Base, top, fault, salt, reef, sea floor
+    """
+    FeatureName: str | None = None
+    """
+    Name of the feature the marker is characterizing
+    """
+    PositiveVerticalDelta: float | None = None
+    """
+    The distance vertically above the Marker position that marks the limit of the high confidence range for the Marker pick.
+    """
+    NegativeVerticalDelta: float | None = None
+    """
+    The distance vertically below the Marker position that marks the limit of the high confidence range for the Marker pick.
+    """
+    SurfaceDipAngle: float | None = None
+    """
+    Dip angle for the Wellbore Marker.
+    """
+    SurfaceDipAzimuth: float | None = None
+    """
+    Dip azimuth for the Wellbore Marker.
+    """
+    Missing: str | None = None
+    GeologicalAge: str | None = None
+    """
+    Associated geological age
+    """
+
+
+class Data(OsduCommonResources, AbstractWPCGroupType, AbstractWorkProductComponent):
+    """
+    `data` payload for WellboreMarkerSet 1.1.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(None, title='Wellbore ID')
+    """
+    The Wellbore ID, to which the markers in this set belong.
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement | None = Field(
+        None, title='Vertical Measurement'
+    )
+    """
+    References an entry in the Vertical Measurement array for the Wellbore identified by WellboreID, which defines the vertical reference datum for all marker measured depths of the Wellbore Marker Set Markers array.
+    """
+    AvailableMarkerProperties: list[AvailableMarkerProperty] | None = Field(
+        None, title='Available Marker Properties'
+    )
+    """
+    The array of MarkerProperty definitions describing the available properties for this instance of WellboreMarkerSet.
+    """
+    Markers: list[Marker] | None = Field(None, title='Markers')
+    """
+    The array of marker meta data in this set.
+    """
+    ExtensionProperties: dict[str, Any] | None = None

osdu_models/workproductcomponent/wellbore_marker_set/v1_2_0.py

@@ -0,0 +1,192 @@
+# generated by datamodel-codegen:
+#   filename:  workproductcomponent/wellbore_marker_set/v1_2_0.json
+
+from __future__ import annotations
+from pydantic import BaseModel, ConfigDict, Field, constr
+from typing import Any
+from ...abstract.abstract_facility_vertical_measurement import v1_0_0
+from ...abstract.abstract_common_resources.v1_0_0 import OsduCommonResources
+from ...abstract.abstract_wpcgroup_type.v1_0_0 import AbstractWPCGroupType
+from ...abstract.abstract_work_product_component.v1_0_0 import (
+    AbstractWorkProductComponent,
+)
+
+
+class AvailableMarkerProperty(BaseModel):
+    """
+    A set of properties describing a marker property which is available for this instance of a WellboreMarkerSet.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    MarkerPropertyTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-MarkerPropertyType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['partition-id:reference-data--MarkerPropertyType:MissingThickness:'],
+        title='Marker Property Type ID',
+    )
+    """
+    The reference to a marker property type - or if interpreted as CSV columns, the 'well-known column type. It is a relationship to a reference-data--MarkerPropertyType record id.
+    """
+    MarkerPropertyUnitID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-UnitOfMeasure:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(
+        None,
+        examples=['partition-id:reference-data--UnitOfMeasure:ft:'],
+        title='Marker Property Unit ID',
+    )
+    """
+    Unit of Measure for the marker properties of type MarkerPropertyType.
+    """
+    Name: str | None = Field(None, examples=['MissingThickness'], title='Name')
+    """
+    The name of the marker property (e.g. column in a CSV document) as originally found. If absent The name of the MarkerPropertyType is intended to be used.
+    """
+
+
+class Marker(BaseModel):
+    """
+    The array of marker meta data in this set.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    MarkerName: str | None = None
+    """
+    Name of the Marker
+    """
+    MarkerID: str | None = Field(None, title='Marker ID')
+    """
+    A unique identifier of the marker in the list of data.Markers[], ideally a UUID. If unpopulated, the string-converted element index number is used. The first index is "0".
+    """
+    InterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:(work-product-component\-\-HorizonInterpretation|work-product-component\-\-FaultInterpretation|work-product-component\-\-GeobodyBoundaryInterpretation):[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Interpretation ID')
+    """
+    The optional relationship to a HorizonInterpretation, GeobodyBoundaryInterpretation or FaultInterpretation.
+    """
+    MarkerMeasuredDepth: float | None = None
+    """
+    The depth at which the Marker was noted.
+    """
+    MarkerSubSeaVerticalDepth: float | None = None
+    """
+    The Marker's TVD converted to a Sub-Sea Vertical depth, i.e., below Mean Sea Level. Note that TVD values above MSL are negative. This is the same as true vertical depth referenced to the vertical CRS “MSL depth”.
+    """
+    MarkerDate: str | None = None
+    """
+    Timestamp of the date and time when the when the Marker was interpreted.
+    """
+    MarkerObservationNumber: float | None = None
+    """
+    Any observation number that distinguishes a Marker observation from others with same Marker name, date.
+    """
+    MarkerInterpreter: str | None = None
+    """
+    The name of the Marker interpreter (could be a person or vendor).
+    """
+    MarkerTypeID: (
+        constr(pattern=r'^[\w\-\.]+:reference-data\-\-MarkerType:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = None
+    """
+    Marker Type Reference Type. Possible values - Biostratigraphy, Lithostratigraphy, seismic, depth of well, sequence, flow unit
+    """
+    FeatureTypeID: (
+        constr(
+            pattern=r'^[\w\-\.]+:reference-data\-\-FeatureType:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = None
+    """
+    Feature Type Reference Type. Possible values - Base, top, fault, salt, reef, sea floor
+    """
+    FeatureName: str | None = None
+    """
+    Name of the feature the marker is characterizing
+    """
+    PositiveVerticalDelta: float | None = None
+    """
+    The distance vertically above the Marker position that marks the limit of the high confidence range for the Marker pick.
+    """
+    NegativeVerticalDelta: float | None = None
+    """
+    The distance vertically below the Marker position that marks the limit of the high confidence range for the Marker pick.
+    """
+    SurfaceDipAngle: float | None = None
+    """
+    Dip angle for the Wellbore Marker.
+    """
+    SurfaceDipAzimuth: float | None = None
+    """
+    Dip azimuth for the Wellbore Marker.
+    """
+    Missing: str | None = None
+    GeologicalAge: str | None = None
+    """
+    Associated geological age
+    """
+
+
+class Data(OsduCommonResources, AbstractWPCGroupType, AbstractWorkProductComponent):
+    """
+    `data` payload for WellboreMarkerSet 1.2.0.
+    """
+
+    model_config = ConfigDict(
+        extra='allow',
+    )
+    WellboreID: (
+        constr(pattern=r'^[\w\-\.]+:master-data\-\-Wellbore:[\w\-\.\:\%]+:[0-9]*$')
+        | None
+    ) = Field(None, title='Wellbore ID')
+    """
+    The Wellbore ID, to which the markers in this set belong.
+    """
+    VerticalMeasurement: v1_0_0.AbstractFacilityVerticalMeasurement | None = Field(
+        None, title='Vertical Measurement'
+    )
+    """
+    References an entry in the Vertical Measurement array for the Wellbore identified by WellboreID, which defines the vertical reference datum for all marker measured depths of the Wellbore Marker Set Markers array.
+    """
+    AvailableMarkerProperties: list[AvailableMarkerProperty] | None = Field(
+        None, title='Available Marker Properties'
+    )
+    """
+    The array of MarkerProperty definitions describing the available properties for this instance of WellboreMarkerSet.
+    """
+    Markers: list[Marker] | None = Field(None, title='Markers')
+    """
+    The array of marker meta data in this set. Markers are externally identified by data.Markers[].MarkerID, ideally a UUID. Older versions of the WellboreMarkerSet schema do not have this identifier. In this case, the string-converted array index is used as MarkerID. The the first index is "0".
+    """
+    StratigraphicColumnID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-StratigraphicColumn:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Stratigraphic Column ID')
+    """
+    The optional reference to a stratigraphic column (referring to multiple StratigraphicColumnRankInterpretation) providing the stratigraphic framework for the WellboreMarkerSet. It demonstrates the intent to describe complex, potentially overlapping stratigraphic intervals. Only one of the properties StratigraphicColumnID or StratigraphicColumnRankInterpretationID should be populated.
+    """
+    StratigraphicColumnRankInterpretationID: (
+        constr(
+            pattern=r'^[\w\-\.]+:work-product-component\-\-StratigraphicColumnRankInterpretation:[\w\-\.\:\%]+:[0-9]*$'
+        )
+        | None
+    ) = Field(None, title='Stratigraphic Column Rank ID')
+    """
+    The optional reference to a StratigraphicColumnRankInterpretation. It expresses the intent of a stratigraphic framework with non-overlapping intervals. Only one of the properties StratigraphicColumnID or StratigraphicColumnRankInterpretationID should be populated.
+    """
+    ExtensionProperties: dict[str, Any] | None = None