noshot 0.1.7__py3-none-any.whl → 0.1.8__py3-none-any.whl

noshot/data/ML TS XAI/CN/4. Wired Network/wired.tcl

@@ -1,81 +0,0 @@
-#How to run
-#==========
-#save this file as wired.tcl in desktop folder
-#also save wired.awk file in the same location
-#open desktop right-click and choose 'Open in Terminal'
-#run this command
-#ns wired.tcl
-
-#both nam and awk file will be executed automatically
-
-#create a simulator object 
-set ns [new Simulator]
-
-#create a trace file, this file is for logging purpose 
-set tracefile [open wired.tr w]
-$ns trace-all $tracefile
-
-#create a animation infomration or NAM file creation
-set namfile [open wired.nam w]
-$ns namtrace-all $namfile
-
-#create nodes
-set n0 [$ns node]
-set n1 [$ns node]
-set n2 [$ns node]
-set n3 [$ns node]
-set n4 [$ns node]
-set n5 [$ns node]
-
-#creation of link between nodes with DropTail Queue
-#Droptail means Dropping the tail.
-$ns duplex-link $n0 $n1 5Mb 2ms DropTail
-$ns duplex-link $n2 $n1 10Mb 5ms DropTail
-$ns duplex-link $n1 $n4 3Mb 10ms DropTail
-$ns duplex-link $n4 $n3 100Mb 2ms DropTail
-$ns duplex-link $n4 $n5 4Mb 10ms DropTail
-
-#creation of Agents
-#node 0 to Node 3
-set udp [new Agent/UDP]
-set null [new Agent/Null]
-$ns attach-agent $n0 $udp
-$ns attach-agent $n3 $null
-$ns connect $udp $null
-
-#creation of TCP Agent
-set tcp [new Agent/TCP]
-set sink [new Agent/TCPSink]
-$ns attach-agent $n2 $tcp
-$ns attach-agent $n5 $sink
-$ns connect $tcp $sink
-
-#creation of Application CBR, FTP
-#CBR - Constant Bit Rate (Example nmp3 files that have a CBR or 192kbps, 320kbps, etc.)
-#FTP - File Transfer Protocol (Ex: To download a file from a network)
-set cbr [new Application/Traffic/CBR]
-$cbr attach-agent $udp
-
-set ftp [new Application/FTP]
-$ftp attach-agent $tcp
-
-#Start the traffic 
-$ns at 1.0 "$cbr start"
-$ns at 2.0 "$ftp start"
-
-$ns at 10.0 "finish"
-
-#the following procedure will be called at 10.0 seconds 
-proc finish {} {
- global ns tracefile namfile
- $ns flush-trace
- close $tracefile
- close $namfile
- puts "Executing nam file"
- exec nam wired.nam &
- exec awk -f wired.awk wired.tr &
- exit 0
-}
-
-puts "Simulation is starting..."
-$ns run

noshot/data/ML TS XAI/CN/5. Wireless Network/wireless.awk

@@ -1,27 +0,0 @@
-BEGIN {
-	rec=sen=drp=0
-	res=start=end=0.0
-}
-
-{
-	if($1 == "s")sen++
-	if($1 == "r"){
-		if(rec==0)start = $2
-		rec++		
-		res += $8
-		end = $2
-	}
-	if($1 == "D")drp++
-}
-
-END {
-	print("")
-	print("Wireless-Network")
-	print("Number Of Packets Sent : ", sen)
-	print("Number Of Packets Recieved : ", rec)
-	print("Number Of Packets Dropped  : ", drp)
-	print("Start Of Simulation (in sec) : ", start)
-	print("End Of Simulation (in sec)   : ", end)
-	print("Total Throughput : ",((res*8) / ((end-start)*1000000))," Mbps")
-	print("Packet Delivery Ratio: ",rec*100/sen,"%")
-}

noshot/data/ML TS XAI/CN/5. Wireless Network/wireless.tcl

@@ -1,153 +0,0 @@
-#How to run
-#==========
-#save this file as wireless.tcl in desktop folder
-#also save wireless.awk file in the same location
-#open desktop right-click and choose 'Open in Terminal'
-#run this command
-#ns wireless.tcl
-
-#both nam and awk file will be executed automatically
-
-
-#Example of Wireless networks
-#Step 1 initialize variables
-#Step 2 - Create a Simulator object
-#step 3 - Create Tracing and animation file
-#step 4 - topography
-#step 5 - GOD - General Operations Director
-#step 6 - Create nodes
-#Step 7 - Create Channel (Communication PATH)
-#step 8 - Position of the nodes (Wireless nodes needs a location)
-#step 9 - Any mobility codes (if the nodes are moving)
-#step 10 - TCP, UDP Traffic
-#run the simulation
-
-#initialize the variables
-set val(chan)           Channel/WirelessChannel    ;#Channel Type
-set val(prop)           Propagation/TwoRayGround   ;# radio-propagation model
-set val(netif)          Phy/WirelessPhy            ;# network interface type WAVELAN DSSS 2.4GHz
-set val(mac)            Mac/802_11                 ;# MAC type
-set val(ifq)            Queue/DropTail/PriQueue    ;# interface queue type
-set val(ll)             LL                         ;# link layer type
-set val(ant)            Antenna/OmniAntenna        ;# antenna model
-set val(ifqlen)         50                         ;# max packet in ifq
-set val(nn)             6                          ;# number of mobilenodes
-set val(rp)             AODV                       ;# routing protocol
-set val(x)  500   ;# in metres
-set val(y)  500   ;# in metres
-#Adhoc OnDemand Distance Vector
-
-#creation of Simulator
-set ns [new Simulator]
-
-#creation of Trace and namfile 
-set tracefile [open wireless.tr w]
-$ns trace-all $tracefile
-
-#Creation of Network Animation file
-set namfile [open wireless.nam w]
-$ns namtrace-all-wireless $namfile $val(x) $val(y)
-
-#create topography
-set topo [new Topography]
-$topo load_flatgrid $val(x) $val(y)
-
-#GOD Creation - General Operations Director
-create-god $val(nn)
-
-set channel1 [new $val(chan)]
-set channel2 [new $val(chan)]
-set channel3 [new $val(chan)]
-
-#configure the node
-$ns node-config -adhocRouting $val(rp)   -llType $val(ll)   -macType $val(mac)   -ifqType $val(ifq)   -ifqLen $val(ifqlen)   -antType $val(ant)   -propType $val(prop)   -phyType $val(netif)   -topoInstance $topo   -agentTrace ON   -macTrace ON   -routerTrace ON   -movementTrace ON   -channel $channel1 
-
-set n0 [$ns node]
-set n1 [$ns node]
-set n2 [$ns node]
-set n3 [$ns node]
-set n4 [$ns node]
-set n5 [$ns node]
-
-$n0 random-motion 0
-$n1 random-motion 0
-$n2 random-motion 0
-$n3 random-motion 0
-$n4 random-motion 0
-$n5 random-motion 0
-
-$ns initial_node_pos $n0 20
-$ns initial_node_pos $n1 20
-$ns initial_node_pos $n2 20
-$ns initial_node_pos $n3 20
-$ns initial_node_pos $n4 20
-$ns initial_node_pos $n5 50
-
-#initial coordinates of the nodes 
-$n0 set X_ 10.0
-$n0 set Y_ 20.0
-$n0 set Z_ 0.0
-
-$n1 set X_ 210.0
-$n1 set Y_ 230.0
-$n1 set Z_ 0.0
-
-$n2 set X_ 100.0
-$n2 set Y_ 200.0
-$n2 set Z_ 0.0
-
-$n3 set X_ 150.0
-$n3 set Y_ 230.0
-$n3 set Z_ 0.0
-
-$n4 set X_ 430.0
-$n4 set Y_ 320.0
-$n4 set Z_ 0.0
-
-$n5 set X_ 270.0
-$n5 set Y_ 120.0
-$n5 set Z_ 0.0
-#Dont mention any values above than 500 because in this example, we use X and Y as 500,500
-
-#mobility of the nodes
-#At what Time? Which node? Where to? at What Speed?
-$ns at 1.0 "$n1 setdest 490.0 340.0 25.0"
-$ns at 1.0 "$n4 setdest 300.0 130.0 5.0"
-$ns at 1.0 "$n5 setdest 190.0 440.0 15.0"
-#the nodes can move any number of times at any location during the simulation (runtime)
-$ns at 20.0 "$n5 setdest 100.0 200.0 30.0"
-
-#creation of agents
-set tcp [new Agent/TCP]
-set sink [new Agent/TCPSink]
-$ns attach-agent $n0 $tcp
-$ns attach-agent $n5 $sink
-$ns connect $tcp $sink
-set ftp [new Application/FTP]
-$ftp attach-agent $tcp
-$ns at 1.0 "$ftp start"
-
-set udp [new Agent/UDP]
-set null [new Agent/Null]
-$ns attach-agent $n2 $udp
-$ns attach-agent $n3 $null
-$ns connect $udp $null
-set cbr [new Application/Traffic/CBR]
-$cbr attach-agent $udp
-$ns at 1.0 "$cbr start"
-
-$ns at 30.0 "finish"
-
-proc finish {} {
- global ns tracefile namfile
- $ns flush-trace
- close $tracefile
- close $namfile
- puts "Executing nam file"
- exec nam wireless.nam &
- exec awk -f wireless.awk wireless.tr &
- exit 0
-}
-
-puts "Starting Simulation"
-$ns run

noshot/data/ML TS XAI/CN/6. TCP Flow And Congestion Control/TCP Congestion Control/Sack And Vegas/analysis.awk

@@ -1,27 +0,0 @@
-BEGIN{
-st1=ft1=0
-throughput1=0
-delay1=flag1=data1=0
-}
- 
-{
-if($1=="r"&&$4==5){
-data1+=$6
-if(flag1==0){
-st1=$2
-flag1=1}
-if(flag1==1){
-ft1=$2}}
-}
-
-END{
-delay1=ft1-st1
-throughput1=data1/delay1
-print("")
-print("**********HTTP***********")
-print("Start time =",st1) 
-print("End time =",ft1) 
-print("Data:",data1) 
-print("Throughput:",throughput1) 
-print("Delay:",delay1) 
-}

noshot/data/ML TS XAI/CN/6. TCP Flow And Congestion Control/TCP Congestion Control/Sack And Vegas/sack.tcl

@@ -1,86 +0,0 @@
-#How to run
-#==========
-#save this file as sack.tcl in desktop folder
-#open desktop right-click and choose 'Open in Terminal'
-#run this command
-#ns sack.tcl
-
-#nam file, xgraph and awk file will be executed automatically
-
-#creating a simulator object
-set ns [ new Simulator ]
-$ns color 3 Green
-#creating trace file
-set tf [open sack.tr w]
-$ns trace-all $tf
-
-#creating nam file
-set nf [open sack.nam w]
-$ns namtrace-all $nf
-
-set ft3 [open sack_Sender_throughput w]
-
-#finish procedure to call nam and xgraph
-proc finish {} {
- global ns nf ft3 
- $ns flush-trace
- close $nf
- close $ft3
- exec xgraph sack_Sender_throughput &
- puts "running nam..." 
- exec nam sack.nam &
- exec awk -f analysis.awk sack.tr &
- exit 0
-}
-#record procedure to calculate total bandwidth and throughput
-proc record {} {
- global null3 ft3 
- global http1
- set ns [Simulator instance]
- set time 0.1
- set now [$ns now]
- set bw2 [$null3 set bytes_]
- puts $ft3 "$now [expr $bw2/$time*8/1000000]"
- $null3 set bytes_ 0
- $ns at [expr $now+$time] "record"
- }
-#creating 10 nodes
-for {set i 0} {$i < 6} {incr i} {
- set n($i) [$ns node]
-}
-#creating duplex links
-$ns duplex-link $n(0) $n(1) 10Kb 10ms DropTail
-$ns duplex-link $n(0) $n(3) 100Kb 10ms RED
-$ns duplex-link $n(1) $n(2) 50Kb 10ms DropTail
-$ns duplex-link $n(2) $n(5) 200Kb 10ms RED
-$ns duplex-link $n(3) $n(4) 70Kb 10ms DropTail
-$ns duplex-link $n(4) $n(5) 100Kb 10ms DropTail
-
-#orienting links
-$ns duplex-link-op $n(0) $n(1) orient right
-$ns duplex-link-op $n(1) $n(2) orient right-down
-$ns duplex-link-op $n(0) $n(3) orient left-down
-$ns duplex-link-op $n(3) $n(4) orient right-down
-$ns duplex-link-op $n(4) $n(5) orient right
-$ns duplex-link-op $n(2) $n(5) orient left-down
- 
-
-set tcp3 [new Agent/TCP/Sack1] 
-set null3 [new Agent/TCPSink] 
-$ns attach-agent $n(0) $tcp3
-$ns attach-agent $n(5) $null3
-$ns connect $tcp3 $null3
-set http1 [new Application/Traffic/Exponential] 
-$http1 attach-agent $tcp3  
- 
- 
-#scheduling events
-$ns at 0.5 "record"
-$ns at 0.2 "$ns trace-annotate \"Starting HTTP from 0 to 5\""
-$ns at 0.2 "$n(0) color \"green\""
-$ns at 0.2 "$n(5) color \"green\""
-$ns at 0.2 "$http1 start" 
-$ns at 3.2 "$http1 stop"  
-$ns at 5.0 "finish"
-$ns run
-

noshot/data/ML TS XAI/CN/6. TCP Flow And Congestion Control/TCP Congestion Control/Sack And Vegas/vegas.tcl

@@ -1,86 +0,0 @@
-#How to run
-#==========
-#save this file as vegas.tcl in desktop folder
-#open desktop right-click and choose 'Open in Terminal'
-#run this command
-#ns vegas.tcl
-
-#nam file, xgraph and awk file will be executed automatically
-
-#creating a simulator object
-set ns [ new Simulator ]
-$ns color 3 Green
-#creating trace file
-set tf [open vegas.tr w]
-$ns trace-all $tf
-
-#creating nam file
-set nf [open vegas.nam w]
-$ns namtrace-all $nf
-
-set ft3 [open vegas_Sender_throughput w]
-
-#finish procedure to call nam and xgraph
-proc finish {} {
- global ns nf ft3 
- $ns flush-trace
- close $nf
- close $ft3
- exec xgraph vegas_Sender_throughput &
- puts "running nam..." 
- exec nam vegas.nam &
- exec awk -f analysis.awk vegas.tr &
- exit 0
-}
-#record procedure to calculate total bandwidth and throughput
-proc record {} {
- global null3 ft3 
- global http1
- set ns [Simulator instance]
- set time 0.1
- set now [$ns now]
- set bw2 [$null3 set bytes_]
- puts $ft3 "$now [expr $bw2/$time*8/1000000]"
- $null3 set bytes_ 0
- $ns at [expr $now+$time] "record"
- }
-#creating 10 nodes
-for {set i 0} {$i < 6} {incr i} {
- set n($i) [$ns node]
-}
-#creating duplex links
-$ns duplex-link $n(0) $n(1) 10Kb 10ms DropTail
-$ns duplex-link $n(0) $n(3) 100Kb 10ms RED
-$ns duplex-link $n(1) $n(2) 50Kb 10ms DropTail
-$ns duplex-link $n(2) $n(5) 200Kb 10ms RED
-$ns duplex-link $n(3) $n(4) 70Kb 10ms DropTail
-$ns duplex-link $n(4) $n(5) 100Kb 10ms DropTail
-
-#orienting links
-$ns duplex-link-op $n(0) $n(1) orient right
-$ns duplex-link-op $n(1) $n(2) orient right-down
-$ns duplex-link-op $n(0) $n(3) orient left-down
-$ns duplex-link-op $n(3) $n(4) orient right-down
-$ns duplex-link-op $n(4) $n(5) orient right
-$ns duplex-link-op $n(2) $n(5) orient left-down
- 
-
-set tcp3 [new Agent/TCP/Vegas] 
-set null3 [new Agent/TCPSink] 
-$ns attach-agent $n(0) $tcp3
-$ns attach-agent $n(5) $null3
-$ns connect $tcp3 $null3
-set http1 [new Application/Traffic/Exponential] 
-$http1 attach-agent $tcp3  
- 
- 
-#scheduling events
-$ns at 0.5 "record"
-$ns at 0.2 "$ns trace-annotate \"Starting HTTP from 0 to 5\""
-$ns at 0.2 "$n(0) color \"green\""
-$ns at 0.2 "$n(5) color \"green\""
-$ns at 0.2 "$http1 start" 
-$ns at 3.2 "$http1 stop"  
-$ns at 5.0 "finish"
-$ns run
-

noshot/data/ML TS XAI/CN/6. TCP Flow And Congestion Control/TCP Congestion Control/Tahoe And Reno/analysis.awk

@@ -1,28 +0,0 @@
-BEGIN{
-start = end = th = dly = 0
-flag = data = 0
-}
- 
-{
-if($1=="r"&&$4==5){
-	data+=$6
-	if(flag==0){
-		start=$2
-		flag=1
-	}	
-	if(flag==1) 
-		end=$2
-}
-}
-
-END{
-dly = end - start
-th = data/dly
-print("")
-print("**********HTTP***********")
-print("Start time:",start)
-print("End time:",end)
-print("Data =",data)
-print("Throughput =",th)
-print("Delay =",dly)
-}

noshot/data/ML TS XAI/CN/6. TCP Flow And Congestion Control/TCP Congestion Control/Tahoe And Reno/reno.tcl

@@ -1,78 +0,0 @@
-#How to run
-#==========
-#save this file as reno.tcl in desktop folder
-#also save analysis.awk file in the same location
-#open desktop right-click and choose 'Open in Terminal'
-#run this command
-#ns reno.tcl
-
-#both nam and awk file will be executed automatically
-
-set ns [ new Simulator ]
-$ns color 3 Green
-set tf [open reno.tr w]
-$ns trace-all $tf
-
-set nf [open reno.nam w]
-$ns namtrace-all $nf
-
-set ft3 [open reno_Sender_throughput w]
-
-proc finish {} {
- global ns nf ft3 
- $ns flush-trace
- close $nf
- close $ft3
- exec xgraph reno_Sender_throughput &
- puts "running nam..." 
- exec nam reno.nam &
- exec awk -f analysis.awk reno.tr &
- exit 0
-}
-
-proc record {} {
- global null3 ft3 
- global http1
- set ns [Simulator instance]
- set time 0.1
- set now [$ns now]
- set bw2 [$null3 set bytes_]
- puts $ft3 "$now [expr $bw2/$time*8/1000000]"
- $null3 set bytes_ 0
- $ns at [expr $now+$time] "record"
- }
-
-for {set i 0} {$i < 6} {incr i} {
- set n($i) [$ns node]
-}
-
-$ns duplex-link $n(0) $n(1) 10Kb 10ms DropTail
-$ns duplex-link $n(0) $n(3) 100Kb 10ms RED
-$ns duplex-link $n(1) $n(2) 50Kb 10ms DropTail
-$ns duplex-link $n(2) $n(5) 200Kb 10ms RED
-$ns duplex-link $n(3) $n(4) 70Kb 10ms DropTail
-$ns duplex-link $n(4) $n(5) 100Kb 10ms DropTail
-
-$ns duplex-link-op $n(0) $n(1) orient right
-$ns duplex-link-op $n(1) $n(2) orient right-down
-$ns duplex-link-op $n(0) $n(3) orient left-down
-$ns duplex-link-op $n(3) $n(4) orient right-down
-$ns duplex-link-op $n(4) $n(5) orient right
-$ns duplex-link-op $n(2) $n(5) orient left-down
- 
-set tcp3 [new Agent/TCP/Reno] 
-set null3 [new Agent/TCPSink] 
-$ns attach-agent $n(0) $tcp3
-$ns attach-agent $n(5) $null3
-$ns connect $tcp3 $null3
-set http1 [new Application/Traffic/Exponential] 
-$http1 attach-agent $tcp3  
-
-$ns at 0.5 "record"
-$ns at 0.2 "$ns trace-annotate \"Starting HTTP from 0 to 5\""
-$ns at 0.2 "$n(0) color \"green\""
-$ns at 0.2 "$n(5) color \"green\""
-$ns at 0.2 "$http1 start" 
-$ns at 3.2 "$http1 stop"  
-$ns at 5.0 "finish"
-$ns run

noshot/data/ML TS XAI/CN/6. TCP Flow And Congestion Control/TCP Congestion Control/Tahoe And Reno/tahoe.tcl

@@ -1,79 +0,0 @@
-#How to run
-#==========
-#save this file as tahoe.tcl in desktop folder
-#also save analysis.awk file in the same location
-#open desktop right-click and choose 'Open in Terminal'
-#run this command
-#ns tahoe.tcl
-
-#both nam and awk file will be executed automatically
-
-set ns [ new Simulator ]
-$ns color 3 Green
-set tf [open tahoe.tr w]
-$ns trace-all $tf
-
-set nf [open tahoe.nam w]
-$ns namtrace-all $nf
-
-set ft3 [open tahoe_Sender_throughput w]
-
-proc finish {} {
- global ns nf ft3 
- $ns flush-trace
- close $nf
- close $ft3
- exec xgraph tahoe_Sender_throughput &
- puts "running nam..." 
- exec nam tahoe.nam &
- exec awk -f analysis.awk tahoe.tr &
- exit 0
-}
-
-proc record {} {
- global null3 ft3 
- global http1
- set ns [Simulator instance]
- set time 0.1
- set now [$ns now]
- set bw2 [$null3 set bytes_]
- puts $ft3 "$now [expr $bw2/$time*8/1000000]"
- $null3 set bytes_ 0
- $ns at [expr $now+$time] "record"
- }
-
-for {set i 0} {$i < 6} {incr i} {
- set n($i) [$ns node]
-}
-
-$ns duplex-link $n(0) $n(1) 10Kb 10ms DropTail
-$ns duplex-link $n(0) $n(3) 100Kb 10ms RED
-$ns duplex-link $n(1) $n(2) 50Kb 10ms DropTail
-$ns duplex-link $n(2) $n(5) 200Kb 10ms RED
-$ns duplex-link $n(3) $n(4) 70Kb 10ms DropTail
-$ns duplex-link $n(4) $n(5) 100Kb 10ms DropTail
-
-$ns duplex-link-op $n(0) $n(1) orient right
-$ns duplex-link-op $n(1) $n(2) orient right-down
-$ns duplex-link-op $n(0) $n(3) orient left-down
-$ns duplex-link-op $n(3) $n(4) orient right-down
-$ns duplex-link-op $n(4) $n(5) orient right
-$ns duplex-link-op $n(2) $n(5) orient left-down
- 
-
-set tcp3 [new Agent/TCP]
-set null3 [new Agent/TCPSink]
-$ns attach-agent $n(0) $tcp3
-$ns attach-agent $n(5) $null3
-$ns connect $tcp3 $null3
-set http1 [new Application/Traffic/Exponential]
-$http1 attach-agent $tcp3
- 
-$ns at 0.5 "record"
-$ns at 0.2 "$ns trace-annotate \"Starting HTTP from 0 to 5\""
-$ns at 0.2 "$n(0) color \"green\""
-$ns at 0.2 "$n(5) color \"green\""
-$ns at 0.2 "$http1 start"
-$ns at 3.2 "$http1 stop" 
-$ns at 5.0 "finish"
-$ns run

noshot/data/ML TS XAI/CN/6. TCP Flow And Congestion Control/TCP Flow Control/analysis.awk

@@ -1,27 +0,0 @@
-BEGIN{
-st1=ft1=0
-throughput1=0
-delay1=flag1=data1=0
-}
- 
-{
-if($1=="r"&&$4==5){
-data1+=$6
-if(flag1==0){
-st1=$2
-flag1=1}
-if(flag1==1){
-ft1=$2}}
-}
-
-END{
-delay1=ft1-st1
-throughput1=data1/delay1
-print("")
-print("**********HTTP***********")
-print("Start time =",st1) 
-print("End time =",ft1) 
-print("Data:",data1) 
-print("Throughput:",throughput1) 
-print("Delay:",delay1) 
-}