siesa-agents 2.1.40 → 2.1.41

package/bmad/bmm/workflows/testarch/automate/checklist.md

@@ -1,582 +1,582 @@
-# Automate Workflow Validation Checklist
-
-Use this checklist to validate that the automate workflow has been executed correctly and all deliverables meet quality standards.
-
-## Prerequisites
-
-Before starting this workflow, verify:
-
-- [ ] Framework scaffolding configured (playwright.config.ts or cypress.config.ts exists)
-- [ ] Test directory structure exists (tests/ folder with subdirectories)
-- [ ] Package.json has test framework dependencies installed
-
-**Halt only if:** Framework scaffolding is completely missing (run `framework` workflow first)
-
-**Note:** BMad artifacts (story, tech-spec, PRD) are OPTIONAL - workflow can run without them
-**Note:** `automate` generates tests; it does not run `*atdd` or `*test-review`. If ATDD outputs exist, use them as input and avoid duplicate coverage.
-
----
-
-## Step 1: Execution Mode Determination and Context Loading
-
-### Mode Detection
-
-- [ ] Execution mode correctly determined:
-  - [ ] BMad-Integrated Mode (story_file variable set) OR
-  - [ ] Standalone Mode (target_feature or target_files set) OR
-  - [ ] Auto-discover Mode (no targets specified)
-
-### BMad Artifacts (If Available - OPTIONAL)
-
-- [ ] Story markdown loaded (if `{story_file}` provided)
-- [ ] Acceptance criteria extracted from story (if available)
-- [ ] Tech-spec.md loaded (if `{use_tech_spec}` true and file exists)
-- [ ] Test-design.md loaded (if `{use_test_design}` true and file exists)
-- [ ] PRD.md loaded (if `{use_prd}` true and file exists)
-- [ ] **Note**: Absence of BMad artifacts does NOT halt workflow
-
-### Framework Configuration
-
-- [ ] Test framework config loaded (playwright.config.ts or cypress.config.ts)
-- [ ] Test directory structure identified from `{test_dir}`
-- [ ] Existing test patterns reviewed
-- [ ] Test runner capabilities noted (parallel execution, fixtures, etc.)
-
-### Coverage Analysis
-
-- [ ] Existing test files searched in `{test_dir}` (if `{analyze_coverage}` true)
-- [ ] Tested features vs untested features identified
-- [ ] Coverage gaps mapped (tests to source files)
-- [ ] Existing fixture and factory patterns checked
-
-### Knowledge Base Fragments Loaded
-
-- [ ] `test-levels-framework.md` - Test level selection
-- [ ] `test-priorities.md` - Priority classification (P0-P3)
-- [ ] `fixture-architecture.md` - Fixture patterns with auto-cleanup
-- [ ] `data-factories.md` - Factory patterns using faker
-- [ ] `selective-testing.md` - Targeted test execution strategies
-- [ ] `ci-burn-in.md` - Flaky test detection patterns
-- [ ] `test-quality.md` - Test design principles
-
----
-
-## Step 2: Automation Targets Identification
-
-### Target Determination
-
-**BMad-Integrated Mode (if story available):**
-
-- [ ] Acceptance criteria mapped to test scenarios
-- [ ] Features implemented in story identified
-- [ ] Existing ATDD tests checked (if any)
-- [ ] Expansion beyond ATDD planned (edge cases, negative paths)
-
-**Standalone Mode (if no story):**
-
-- [ ] Specific feature analyzed (if `{target_feature}` specified)
-- [ ] Specific files analyzed (if `{target_files}` specified)
-- [ ] Features auto-discovered (if `{auto_discover_features}` true)
-- [ ] Features prioritized by:
-  - [ ] No test coverage (highest priority)
-  - [ ] Complex business logic
-  - [ ] External integrations (API, database, auth)
-  - [ ] Critical user paths (login, checkout, etc.)
-
-### Test Level Selection
-
-- [ ] Test level selection framework applied (from `test-levels-framework.md`)
-- [ ] E2E tests identified: Critical user journeys, multi-system integration
-- [ ] API tests identified: Business logic, service contracts, data transformations
-- [ ] Component tests identified: UI behavior, interactions, state management
-- [ ] Unit tests identified: Pure logic, edge cases, error handling
-
-### Duplicate Coverage Avoidance
-
-- [ ] Same behavior NOT tested at multiple levels unnecessarily
-- [ ] E2E used for critical happy path only
-- [ ] API tests used for business logic variations
-- [ ] Component tests used for UI interaction edge cases
-- [ ] Unit tests used for pure logic edge cases
-
-### Priority Assignment
-
-- [ ] Test priorities assigned using `test-priorities.md` framework
-- [ ] P0 tests: Critical paths, security-critical, data integrity
-- [ ] P1 tests: Important features, integration points, error handling
-- [ ] P2 tests: Edge cases, less-critical variations, performance
-- [ ] P3 tests: Nice-to-have, rarely-used features, exploratory
-- [ ] Priority variables respected:
-  - [ ] `{include_p0}` = true (always include)
-  - [ ] `{include_p1}` = true (high priority)
-  - [ ] `{include_p2}` = true (medium priority)
-  - [ ] `{include_p3}` = false (low priority, skip by default)
-
-### Coverage Plan Created
-
-- [ ] Test coverage plan documented
-- [ ] What will be tested at each level listed
-- [ ] Priorities assigned to each test
-- [ ] Coverage strategy clear (critical-paths, comprehensive, or selective)
-
----
-
-## Step 3: Test Infrastructure Generated
-
-### Fixture Architecture
-
-- [ ] Existing fixtures checked in `tests/support/fixtures/`
-- [ ] Fixture architecture created/enhanced (if `{generate_fixtures}` true)
-- [ ] All fixtures use Playwright's `test.extend()` pattern
-- [ ] All fixtures have auto-cleanup in teardown
-- [ ] Common fixtures created/enhanced:
-  - [ ] authenticatedUser (with auto-delete)
-  - [ ] apiRequest (authenticated client)
-  - [ ] mockNetwork (external service mocking)
-  - [ ] testDatabase (with auto-cleanup)
-
-### Data Factories
-
-- [ ] Existing factories checked in `tests/support/factories/`
-- [ ] Factory architecture created/enhanced (if `{generate_factories}` true)
-- [ ] All factories use `@faker-js/faker` for random data (no hardcoded values)
-- [ ] All factories support overrides for specific scenarios
-- [ ] Common factories created/enhanced:
-  - [ ] User factory (email, password, name, role)
-  - [ ] Product factory (name, price, SKU)
-  - [ ] Order factory (items, total, status)
-- [ ] Cleanup helpers provided (e.g., deleteUser(), deleteProduct())
-
-### Helper Utilities
-
-- [ ] Existing helpers checked in `tests/support/helpers/` (if `{update_helpers}` true)
-- [ ] Common utilities created/enhanced:
-  - [ ] waitFor (polling for complex conditions)
-  - [ ] retry (retry helper for flaky operations)
-  - [ ] testData (test data generation)
-  - [ ] assertions (custom assertion helpers)
-
----
-
-## Step 4: Test Files Generated
-
-### Test File Structure
-
-- [ ] Test files organized correctly:
-  - [ ] `tests/e2e/` for E2E tests
-  - [ ] `tests/api/` for API tests
-  - [ ] `tests/component/` for component tests
-  - [ ] `tests/unit/` for unit tests
-  - [ ] `tests/support/` for fixtures/factories/helpers
-
-### E2E Tests (If Applicable)
-
-- [ ] E2E test files created in `tests/e2e/`
-- [ ] All tests follow Given-When-Then format
-- [ ] All tests have priority tags ([P0], [P1], [P2], [P3]) in test name
-- [ ] All tests use data-testid selectors (not CSS classes)
-- [ ] One assertion per test (atomic design)
-- [ ] No hard waits or sleeps (explicit waits only)
-- [ ] Network-first pattern applied (route interception BEFORE navigation)
-- [ ] Clear Given-When-Then comments in test code
-
-### API Tests (If Applicable)
-
-- [ ] API test files created in `tests/api/`
-- [ ] All tests follow Given-When-Then format
-- [ ] All tests have priority tags in test name
-- [ ] API contracts validated (request/response structure)
-- [ ] HTTP status codes verified
-- [ ] Response body validation includes required fields
-- [ ] Error cases tested (400, 401, 403, 404, 500)
-- [ ] JWT token format validated (if auth tests)
-
-### Component Tests (If Applicable)
-
-- [ ] Component test files created in `tests/component/`
-- [ ] All tests follow Given-When-Then format
-- [ ] All tests have priority tags in test name
-- [ ] Component mounting works correctly
-- [ ] Interaction testing covers user actions (click, hover, keyboard)
-- [ ] State management validated
-- [ ] Props and events tested
-
-### Unit Tests (If Applicable)
-
-- [ ] Unit test files created in `tests/unit/`
-- [ ] All tests follow Given-When-Then format
-- [ ] All tests have priority tags in test name
-- [ ] Pure logic tested (no dependencies)
-- [ ] Edge cases covered
-- [ ] Error handling tested
-
-### Quality Standards Enforced
-
-- [ ] All tests use Given-When-Then format with clear comments
-- [ ] All tests have descriptive names with priority tags
-- [ ] No duplicate tests (same behavior tested multiple times)
-- [ ] No flaky patterns (race conditions, timing issues)
-- [ ] No test interdependencies (tests can run in any order)
-- [ ] Tests are deterministic (same input always produces same result)
-- [ ] All tests use data-testid selectors (E2E tests)
-- [ ] No hard waits: `await page.waitForTimeout()` (forbidden)
-- [ ] No conditional flow: `if (await element.isVisible())` (forbidden)
-- [ ] No try-catch for test logic (only for cleanup)
-- [ ] No hardcoded test data (use factories with faker)
-- [ ] No page object classes (tests are direct and simple)
-- [ ] No shared state between tests
-
-### Network-First Pattern Applied
-
-- [ ] Route interception set up BEFORE navigation (E2E tests with network requests)
-- [ ] `page.route()` called before `page.goto()` to prevent race conditions
-- [ ] Network-first pattern verified in all E2E tests that make API calls
-
----
-
-## Step 5: Test Validation and Healing (NEW - Phase 2.5)
-
-### Healing Configuration
-
-- [ ] Healing configuration checked:
-  - [ ] `{auto_validate}` setting noted (default: true)
-  - [ ] `{auto_heal_failures}` setting noted (default: false)
-  - [ ] `{max_healing_iterations}` setting noted (default: 3)
-  - [ ] `{use_mcp_healing}` setting noted (default: true)
-
-### Healing Knowledge Fragments Loaded (If Healing Enabled)
-
-- [ ] `test-healing-patterns.md` loaded (common failure patterns and fixes)
-- [ ] `selector-resilience.md` loaded (selector refactoring guide)
-- [ ] `timing-debugging.md` loaded (race condition fixes)
-
-### Test Execution and Validation
-
-- [ ] Generated tests executed (if `{auto_validate}` true)
-- [ ] Test results captured:
-  - [ ] Total tests run
-  - [ ] Passing tests count
-  - [ ] Failing tests count
-  - [ ] Error messages and stack traces captured
-
-### Healing Loop (If Enabled and Tests Failed)
-
-- [ ] Healing loop entered (if `{auto_heal_failures}` true AND tests failed)
-- [ ] For each failing test:
-  - [ ] Failure pattern identified (selector, timing, data, network, hard wait)
-  - [ ] Appropriate healing strategy applied:
-    - [ ] Stale selector → Replaced with data-testid or ARIA role
-    - [ ] Race condition → Added network-first interception or state waits
-    - [ ] Dynamic data → Replaced hardcoded values with regex/dynamic generation
-    - [ ] Network error → Added route mocking
-    - [ ] Hard wait → Replaced with event-based wait
-  - [ ] Healed test re-run to validate fix
-  - [ ] Iteration count tracked (max 3 attempts)
-
-### Unfixable Tests Handling
-
-- [ ] Tests that couldn't be healed after 3 iterations marked with `test.fixme()` (if `{mark_unhealable_as_fixme}` true)
-- [ ] Detailed comment added to test.fixme() tests:
-  - [ ] What failure occurred
-  - [ ] What healing was attempted (3 iterations)
-  - [ ] Why healing failed
-  - [ ] Manual investigation steps needed
-- [ ] Original test logic preserved in comments
-
-### Healing Report Generated
-
-- [ ] Healing report generated (if healing attempted)
-- [ ] Report includes:
-  - [ ] Auto-heal enabled status
-  - [ ] Healing mode (MCP-assisted or Pattern-based)
-  - [ ] Iterations allowed (max_healing_iterations)
-  - [ ] Validation results (total, passing, failing)
-  - [ ] Successfully healed tests (count, file:line, fix applied)
-  - [ ] Unable to heal tests (count, file:line, reason)
-  - [ ] Healing patterns applied (selector fixes, timing fixes, data fixes)
-  - [ ] Knowledge base references used
-
----
-
-## Step 6: Documentation and Scripts Updated
-
-### Test README Updated
-
-- [ ] `tests/README.md` created or updated (if `{update_readme}` true)
-- [ ] Test suite structure overview included
-- [ ] Test execution instructions provided (all, specific files, by priority)
-- [ ] Fixture usage examples provided
-- [ ] Factory usage examples provided
-- [ ] Priority tagging convention explained ([P0], [P1], [P2], [P3])
-- [ ] How to write new tests documented
-- [ ] Common patterns documented
-- [ ] Anti-patterns documented (what to avoid)
-
-### package.json Scripts Updated
-
-- [ ] package.json scripts added/updated (if `{update_package_scripts}` true)
-- [ ] `test:e2e` script for all E2E tests
-- [ ] `test:e2e:p0` script for P0 tests only
-- [ ] `test:e2e:p1` script for P0 + P1 tests
-- [ ] `test:api` script for API tests
-- [ ] `test:component` script for component tests
-- [ ] `test:unit` script for unit tests (if applicable)
-
-### Test Suite Executed
-
-- [ ] Test suite run locally (if `{run_tests_after_generation}` true)
-- [ ] Test results captured (passing/failing counts)
-- [ ] No flaky patterns detected (tests are deterministic)
-- [ ] Setup requirements documented (if any)
-- [ ] Known issues documented (if any)
-
----
-
-## Step 6: Automation Summary Generated
-
-### Automation Summary Document
-
-- [ ] Output file created at `{output_summary}`
-- [ ] Document includes execution mode (BMad-Integrated, Standalone, Auto-discover)
-- [ ] Feature analysis included (source files, coverage gaps) - Standalone mode
-- [ ] Tests created listed (E2E, API, Component, Unit) with counts and paths
-- [ ] Infrastructure created listed (fixtures, factories, helpers)
-- [ ] Test execution instructions provided
-- [ ] Coverage analysis included:
-  - [ ] Total test count
-  - [ ] Priority breakdown (P0, P1, P2, P3 counts)
-  - [ ] Test level breakdown (E2E, API, Component, Unit counts)
-  - [ ] Coverage percentage (if calculated)
-  - [ ] Coverage status (acceptance criteria covered, gaps identified)
-- [ ] Definition of Done checklist included
-- [ ] Next steps provided
-- [ ] Recommendations included (if Standalone mode)
-
-### Summary Provided to User
-
-- [ ] Concise summary output provided
-- [ ] Total tests created across test levels
-- [ ] Priority breakdown (P0, P1, P2, P3 counts)
-- [ ] Infrastructure counts (fixtures, factories, helpers)
-- [ ] Test execution command provided
-- [ ] Output file path provided
-- [ ] Next steps listed
-
----
-
-## Quality Checks
-
-### Test Design Quality
-
-- [ ] Tests are readable (clear Given-When-Then structure)
-- [ ] Tests are maintainable (use factories/fixtures, not hardcoded data)
-- [ ] Tests are isolated (no shared state between tests)
-- [ ] Tests are deterministic (no race conditions or flaky patterns)
-- [ ] Tests are atomic (one assertion per test)
-- [ ] Tests are fast (no unnecessary waits or delays)
-- [ ] Tests are lean (files under {max_file_lines} lines)
-
-### Knowledge Base Integration
-
-- [ ] Test level selection framework applied (from `test-levels-framework.md`)
-- [ ] Priority classification applied (from `test-priorities.md`)
-- [ ] Fixture architecture patterns applied (from `fixture-architecture.md`)
-- [ ] Data factory patterns applied (from `data-factories.md`)
-- [ ] Selective testing strategies considered (from `selective-testing.md`)
-- [ ] Flaky test detection patterns considered (from `ci-burn-in.md`)
-- [ ] Test quality principles applied (from `test-quality.md`)
-
-### Code Quality
-
-- [ ] All TypeScript types are correct and complete
-- [ ] No linting errors in generated test files
-- [ ] Consistent naming conventions followed
-- [ ] Imports are organized and correct
-- [ ] Code follows project style guide
-- [ ] No console.log or debug statements in test code
-
----
-
-## Integration Points
-
-### With Framework Workflow
-
-- [ ] Test framework configuration detected and used
-- [ ] Directory structure matches framework setup
-- [ ] Fixtures and helpers follow established patterns
-- [ ] Naming conventions consistent with framework standards
-
-### With BMad Workflows (If Available - OPTIONAL)
-
-**With Story Workflow:**
-
-- [ ] Story ID correctly referenced in output (if story available)
-- [ ] Acceptance criteria from story reflected in tests (if story available)
-- [ ] Technical constraints from story considered (if story available)
-
-**With test-design Workflow:**
-
-- [ ] P0 scenarios from test-design prioritized (if test-design available)
-- [ ] Risk assessment from test-design considered (if test-design available)
-- [ ] Coverage strategy aligned with test-design (if test-design available)
-
-**With atdd Workflow:**
-
-- [ ] ATDD artifacts provided or located (manual handoff; `atdd` not auto-run)
-- [ ] Existing ATDD tests checked (if story had ATDD workflow run)
-- [ ] Expansion beyond ATDD planned (edge cases, negative paths)
-- [ ] No duplicate coverage with ATDD tests
-
-### With CI Pipeline
-
-- [ ] Tests can run in CI environment
-- [ ] Tests are parallelizable (no shared state)
-- [ ] Tests have appropriate timeouts
-- [ ] Tests clean up their data (no CI environment pollution)
-
----
-
-## Completion Criteria
-
-All of the following must be true before marking this workflow as complete:
-
-- [ ] **Execution mode determined** (BMad-Integrated, Standalone, or Auto-discover)
-- [ ] **Framework configuration loaded** and validated
-- [ ] **Coverage analysis completed** (gaps identified if analyze_coverage true)
-- [ ] **Automation targets identified** (what needs testing)
-- [ ] **Test levels selected** appropriately (E2E, API, Component, Unit)
-- [ ] **Duplicate coverage avoided** (same behavior not tested at multiple levels)
-- [ ] **Test priorities assigned** (P0, P1, P2, P3)
-- [ ] **Fixture architecture created/enhanced** with auto-cleanup
-- [ ] **Data factories created/enhanced** using faker (no hardcoded data)
-- [ ] **Helper utilities created/enhanced** (if needed)
-- [ ] **Test files generated** at appropriate levels (E2E, API, Component, Unit)
-- [ ] **Given-When-Then format used** consistently across all tests
-- [ ] **Priority tags added** to all test names ([P0], [P1], [P2], [P3])
-- [ ] **data-testid selectors used** in E2E tests (not CSS classes)
-- [ ] **Network-first pattern applied** (route interception before navigation)
-- [ ] **Quality standards enforced** (no hard waits, no flaky patterns, self-cleaning, deterministic)
-- [ ] **Test README updated** with execution instructions and patterns
-- [ ] **package.json scripts updated** with test execution commands
-- [ ] **Test suite run locally** (if run_tests_after_generation true)
-- [ ] **Tests validated** (if auto_validate enabled)
-- [ ] **Failures healed** (if auto_heal_failures enabled and tests failed)
-- [ ] **Healing report generated** (if healing attempted)
-- [ ] **Unfixable tests marked** with test.fixme() and detailed comments (if any)
-- [ ] **Automation summary created** and saved to correct location
-- [ ] **Output file formatted correctly**
-- [ ] **Knowledge base references applied** and documented (including healing fragments if used)
-- [ ] **No test quality issues** (flaky patterns, race conditions, hardcoded data, page objects)
-
----
-
-## Common Issues and Resolutions
-
-### Issue: BMad artifacts not found
-
-**Problem:** Story, tech-spec, or PRD files not found when variables are set.
-
-**Resolution:**
-
-- **automate does NOT require BMad artifacts** - they are OPTIONAL enhancements
-- If files not found, switch to Standalone Mode automatically
-- Analyze source code directly without BMad context
-- Continue workflow without halting
-
-### Issue: Framework configuration not found
-
-**Problem:** No playwright.config.ts or cypress.config.ts found.
-
-**Resolution:**
-
-- **HALT workflow** - framework is required
-- Message: "Framework scaffolding required. Run `bmad tea *framework` first."
-- User must run framework workflow before automate
-
-### Issue: No automation targets identified
-
-**Problem:** Neither story, target_feature, nor target_files specified, and auto-discover finds nothing.
-
-**Resolution:**
-
-- Check if source_dir variable is correct
-- Verify source code exists in project
-- Ask user to specify target_feature or target_files explicitly
-- Provide examples: `target_feature: "src/auth/"` or `target_files: "src/auth/login.ts,src/auth/session.ts"`
-
-### Issue: Duplicate coverage detected
-
-**Problem:** Same behavior tested at multiple levels (E2E + API + Component).
-
-**Resolution:**
-
-- Review test level selection framework (test-levels-framework.md)
-- Use E2E for critical happy path ONLY
-- Use API for business logic variations
-- Use Component for UI edge cases
-- Remove redundant tests that duplicate coverage
-
-### Issue: Tests have hardcoded data
-
-**Problem:** Tests use hardcoded email addresses, passwords, or other data.
-
-**Resolution:**
-
-- Replace all hardcoded data with factory function calls
-- Use faker for all random data generation
-- Update data-factories to support all required test scenarios
-- Example: `createUser({ email: faker.internet.email() })`
-
-### Issue: Tests are flaky
-
-**Problem:** Tests fail intermittently, pass on retry.
-
-**Resolution:**
-
-- Remove all hard waits (`page.waitForTimeout()`)
-- Use explicit waits (`page.waitForSelector()`)
-- Apply network-first pattern (route interception before navigation)
-- Remove conditional flow (`if (await element.isVisible())`)
-- Ensure tests are deterministic (no race conditions)
-- Run burn-in loop (10 iterations) to detect flakiness
-
-### Issue: Fixtures don't clean up data
-
-**Problem:** Test data persists after test run, causing test pollution.
-
-**Resolution:**
-
-- Ensure all fixtures have cleanup in teardown phase
-- Cleanup happens AFTER `await use(data)`
-- Call deletion/cleanup functions (deleteUser, deleteProduct, etc.)
-- Verify cleanup works by checking database/storage after test run
-
-### Issue: Tests too slow
-
-**Problem:** Tests take longer than 90 seconds (max_test_duration).
-
-**Resolution:**
-
-- Remove unnecessary waits and delays
-- Use parallel execution where possible
-- Mock external services (don't make real API calls)
-- Use API tests instead of E2E for business logic
-- Optimize test data creation (use in-memory database, etc.)
-
----
-
-## Notes for TEA Agent
-
-- **automate is flexible:** Can work with or without BMad artifacts (story, tech-spec, PRD are OPTIONAL)
-- **Standalone mode is powerful:** Analyze any codebase and generate tests independently
-- **Auto-discover mode:** Scan codebase for features needing tests when no targets specified
-- **Framework is the ONLY hard requirement:** HALT if framework config missing, otherwise proceed
-- **Avoid duplicate coverage:** E2E for critical paths only, API/Component for variations
-- **Priority tagging enables selective execution:** P0 tests run on every commit, P1 on PR, P2 nightly
-- **Network-first pattern prevents race conditions:** Route interception BEFORE navigation
-- **No page objects:** Keep tests simple, direct, and maintainable
-- **Use knowledge base:** Load relevant fragments (test-levels, test-priorities, fixture-architecture, data-factories, healing patterns) for guidance
-- **Deterministic tests only:** No hard waits, no conditional flow, no flaky patterns allowed
-- **Optional healing:** auto_heal_failures disabled by default (opt-in for automatic test healing)
-- **Graceful degradation:** Healing works without Playwright MCP (pattern-based fallback)
-- **Unfixable tests handled:** Mark with test.fixme() and detailed comments (not silently broken)
+# Automate Workflow Validation Checklist
+
+Use this checklist to validate that the automate workflow has been executed correctly and all deliverables meet quality standards.
+
+## Prerequisites
+
+Before starting this workflow, verify:
+
+- [ ] Framework scaffolding configured (playwright.config.ts or cypress.config.ts exists)
+- [ ] Test directory structure exists (tests/ folder with subdirectories)
+- [ ] Package.json has test framework dependencies installed
+
+**Halt only if:** Framework scaffolding is completely missing (run `framework` workflow first)
+
+**Note:** BMad artifacts (story, tech-spec, PRD) are OPTIONAL - workflow can run without them
+**Note:** `automate` generates tests; it does not run `*atdd` or `*test-review`. If ATDD outputs exist, use them as input and avoid duplicate coverage.
+
+---
+
+## Step 1: Execution Mode Determination and Context Loading
+
+### Mode Detection
+
+- [ ] Execution mode correctly determined:
+  - [ ] BMad-Integrated Mode (story_file variable set) OR
+  - [ ] Standalone Mode (target_feature or target_files set) OR
+  - [ ] Auto-discover Mode (no targets specified)
+
+### BMad Artifacts (If Available - OPTIONAL)
+
+- [ ] Story markdown loaded (if `{story_file}` provided)
+- [ ] Acceptance criteria extracted from story (if available)
+- [ ] Tech-spec.md loaded (if `{use_tech_spec}` true and file exists)
+- [ ] Test-design.md loaded (if `{use_test_design}` true and file exists)
+- [ ] PRD.md loaded (if `{use_prd}` true and file exists)
+- [ ] **Note**: Absence of BMad artifacts does NOT halt workflow
+
+### Framework Configuration
+
+- [ ] Test framework config loaded (playwright.config.ts or cypress.config.ts)
+- [ ] Test directory structure identified from `{test_dir}`
+- [ ] Existing test patterns reviewed
+- [ ] Test runner capabilities noted (parallel execution, fixtures, etc.)
+
+### Coverage Analysis
+
+- [ ] Existing test files searched in `{test_dir}` (if `{analyze_coverage}` true)
+- [ ] Tested features vs untested features identified
+- [ ] Coverage gaps mapped (tests to source files)
+- [ ] Existing fixture and factory patterns checked
+
+### Knowledge Base Fragments Loaded
+
+- [ ] `test-levels-framework.md` - Test level selection
+- [ ] `test-priorities.md` - Priority classification (P0-P3)
+- [ ] `fixture-architecture.md` - Fixture patterns with auto-cleanup
+- [ ] `data-factories.md` - Factory patterns using faker
+- [ ] `selective-testing.md` - Targeted test execution strategies
+- [ ] `ci-burn-in.md` - Flaky test detection patterns
+- [ ] `test-quality.md` - Test design principles
+
+---
+
+## Step 2: Automation Targets Identification
+
+### Target Determination
+
+**BMad-Integrated Mode (if story available):**
+
+- [ ] Acceptance criteria mapped to test scenarios
+- [ ] Features implemented in story identified
+- [ ] Existing ATDD tests checked (if any)
+- [ ] Expansion beyond ATDD planned (edge cases, negative paths)
+
+**Standalone Mode (if no story):**
+
+- [ ] Specific feature analyzed (if `{target_feature}` specified)
+- [ ] Specific files analyzed (if `{target_files}` specified)
+- [ ] Features auto-discovered (if `{auto_discover_features}` true)
+- [ ] Features prioritized by:
+  - [ ] No test coverage (highest priority)
+  - [ ] Complex business logic
+  - [ ] External integrations (API, database, auth)
+  - [ ] Critical user paths (login, checkout, etc.)
+
+### Test Level Selection
+
+- [ ] Test level selection framework applied (from `test-levels-framework.md`)
+- [ ] E2E tests identified: Critical user journeys, multi-system integration
+- [ ] API tests identified: Business logic, service contracts, data transformations
+- [ ] Component tests identified: UI behavior, interactions, state management
+- [ ] Unit tests identified: Pure logic, edge cases, error handling
+
+### Duplicate Coverage Avoidance
+
+- [ ] Same behavior NOT tested at multiple levels unnecessarily
+- [ ] E2E used for critical happy path only
+- [ ] API tests used for business logic variations
+- [ ] Component tests used for UI interaction edge cases
+- [ ] Unit tests used for pure logic edge cases
+
+### Priority Assignment
+
+- [ ] Test priorities assigned using `test-priorities.md` framework
+- [ ] P0 tests: Critical paths, security-critical, data integrity
+- [ ] P1 tests: Important features, integration points, error handling
+- [ ] P2 tests: Edge cases, less-critical variations, performance
+- [ ] P3 tests: Nice-to-have, rarely-used features, exploratory
+- [ ] Priority variables respected:
+  - [ ] `{include_p0}` = true (always include)
+  - [ ] `{include_p1}` = true (high priority)
+  - [ ] `{include_p2}` = true (medium priority)
+  - [ ] `{include_p3}` = false (low priority, skip by default)
+
+### Coverage Plan Created
+
+- [ ] Test coverage plan documented
+- [ ] What will be tested at each level listed
+- [ ] Priorities assigned to each test
+- [ ] Coverage strategy clear (critical-paths, comprehensive, or selective)
+
+---
+
+## Step 3: Test Infrastructure Generated
+
+### Fixture Architecture
+
+- [ ] Existing fixtures checked in `tests/support/fixtures/`
+- [ ] Fixture architecture created/enhanced (if `{generate_fixtures}` true)
+- [ ] All fixtures use Playwright's `test.extend()` pattern
+- [ ] All fixtures have auto-cleanup in teardown
+- [ ] Common fixtures created/enhanced:
+  - [ ] authenticatedUser (with auto-delete)
+  - [ ] apiRequest (authenticated client)
+  - [ ] mockNetwork (external service mocking)
+  - [ ] testDatabase (with auto-cleanup)
+
+### Data Factories
+
+- [ ] Existing factories checked in `tests/support/factories/`
+- [ ] Factory architecture created/enhanced (if `{generate_factories}` true)
+- [ ] All factories use `@faker-js/faker` for random data (no hardcoded values)
+- [ ] All factories support overrides for specific scenarios
+- [ ] Common factories created/enhanced:
+  - [ ] User factory (email, password, name, role)
+  - [ ] Product factory (name, price, SKU)
+  - [ ] Order factory (items, total, status)
+- [ ] Cleanup helpers provided (e.g., deleteUser(), deleteProduct())
+
+### Helper Utilities
+
+- [ ] Existing helpers checked in `tests/support/helpers/` (if `{update_helpers}` true)
+- [ ] Common utilities created/enhanced:
+  - [ ] waitFor (polling for complex conditions)
+  - [ ] retry (retry helper for flaky operations)
+  - [ ] testData (test data generation)
+  - [ ] assertions (custom assertion helpers)
+
+---
+
+## Step 4: Test Files Generated
+
+### Test File Structure
+
+- [ ] Test files organized correctly:
+  - [ ] `tests/e2e/` for E2E tests
+  - [ ] `tests/api/` for API tests
+  - [ ] `tests/component/` for component tests
+  - [ ] `tests/unit/` for unit tests
+  - [ ] `tests/support/` for fixtures/factories/helpers
+
+### E2E Tests (If Applicable)
+
+- [ ] E2E test files created in `tests/e2e/`
+- [ ] All tests follow Given-When-Then format
+- [ ] All tests have priority tags ([P0], [P1], [P2], [P3]) in test name
+- [ ] All tests use data-testid selectors (not CSS classes)
+- [ ] One assertion per test (atomic design)
+- [ ] No hard waits or sleeps (explicit waits only)
+- [ ] Network-first pattern applied (route interception BEFORE navigation)
+- [ ] Clear Given-When-Then comments in test code
+
+### API Tests (If Applicable)
+
+- [ ] API test files created in `tests/api/`
+- [ ] All tests follow Given-When-Then format
+- [ ] All tests have priority tags in test name
+- [ ] API contracts validated (request/response structure)
+- [ ] HTTP status codes verified
+- [ ] Response body validation includes required fields
+- [ ] Error cases tested (400, 401, 403, 404, 500)
+- [ ] JWT token format validated (if auth tests)
+
+### Component Tests (If Applicable)
+
+- [ ] Component test files created in `tests/component/`
+- [ ] All tests follow Given-When-Then format
+- [ ] All tests have priority tags in test name
+- [ ] Component mounting works correctly
+- [ ] Interaction testing covers user actions (click, hover, keyboard)
+- [ ] State management validated
+- [ ] Props and events tested
+
+### Unit Tests (If Applicable)
+
+- [ ] Unit test files created in `tests/unit/`
+- [ ] All tests follow Given-When-Then format
+- [ ] All tests have priority tags in test name
+- [ ] Pure logic tested (no dependencies)
+- [ ] Edge cases covered
+- [ ] Error handling tested
+
+### Quality Standards Enforced
+
+- [ ] All tests use Given-When-Then format with clear comments
+- [ ] All tests have descriptive names with priority tags
+- [ ] No duplicate tests (same behavior tested multiple times)
+- [ ] No flaky patterns (race conditions, timing issues)
+- [ ] No test interdependencies (tests can run in any order)
+- [ ] Tests are deterministic (same input always produces same result)
+- [ ] All tests use data-testid selectors (E2E tests)
+- [ ] No hard waits: `await page.waitForTimeout()` (forbidden)
+- [ ] No conditional flow: `if (await element.isVisible())` (forbidden)
+- [ ] No try-catch for test logic (only for cleanup)
+- [ ] No hardcoded test data (use factories with faker)
+- [ ] No page object classes (tests are direct and simple)
+- [ ] No shared state between tests
+
+### Network-First Pattern Applied
+
+- [ ] Route interception set up BEFORE navigation (E2E tests with network requests)
+- [ ] `page.route()` called before `page.goto()` to prevent race conditions
+- [ ] Network-first pattern verified in all E2E tests that make API calls
+
+---
+
+## Step 5: Test Validation and Healing (NEW - Phase 2.5)
+
+### Healing Configuration
+
+- [ ] Healing configuration checked:
+  - [ ] `{auto_validate}` setting noted (default: true)
+  - [ ] `{auto_heal_failures}` setting noted (default: false)
+  - [ ] `{max_healing_iterations}` setting noted (default: 3)
+  - [ ] `{use_mcp_healing}` setting noted (default: true)
+
+### Healing Knowledge Fragments Loaded (If Healing Enabled)
+
+- [ ] `test-healing-patterns.md` loaded (common failure patterns and fixes)
+- [ ] `selector-resilience.md` loaded (selector refactoring guide)
+- [ ] `timing-debugging.md` loaded (race condition fixes)
+
+### Test Execution and Validation
+
+- [ ] Generated tests executed (if `{auto_validate}` true)
+- [ ] Test results captured:
+  - [ ] Total tests run
+  - [ ] Passing tests count
+  - [ ] Failing tests count
+  - [ ] Error messages and stack traces captured
+
+### Healing Loop (If Enabled and Tests Failed)
+
+- [ ] Healing loop entered (if `{auto_heal_failures}` true AND tests failed)
+- [ ] For each failing test:
+  - [ ] Failure pattern identified (selector, timing, data, network, hard wait)
+  - [ ] Appropriate healing strategy applied:
+    - [ ] Stale selector → Replaced with data-testid or ARIA role
+    - [ ] Race condition → Added network-first interception or state waits
+    - [ ] Dynamic data → Replaced hardcoded values with regex/dynamic generation
+    - [ ] Network error → Added route mocking
+    - [ ] Hard wait → Replaced with event-based wait
+  - [ ] Healed test re-run to validate fix
+  - [ ] Iteration count tracked (max 3 attempts)
+
+### Unfixable Tests Handling
+
+- [ ] Tests that couldn't be healed after 3 iterations marked with `test.fixme()` (if `{mark_unhealable_as_fixme}` true)
+- [ ] Detailed comment added to test.fixme() tests:
+  - [ ] What failure occurred
+  - [ ] What healing was attempted (3 iterations)
+  - [ ] Why healing failed
+  - [ ] Manual investigation steps needed
+- [ ] Original test logic preserved in comments
+
+### Healing Report Generated
+
+- [ ] Healing report generated (if healing attempted)
+- [ ] Report includes:
+  - [ ] Auto-heal enabled status
+  - [ ] Healing mode (MCP-assisted or Pattern-based)
+  - [ ] Iterations allowed (max_healing_iterations)
+  - [ ] Validation results (total, passing, failing)
+  - [ ] Successfully healed tests (count, file:line, fix applied)
+  - [ ] Unable to heal tests (count, file:line, reason)
+  - [ ] Healing patterns applied (selector fixes, timing fixes, data fixes)
+  - [ ] Knowledge base references used
+
+---
+
+## Step 6: Documentation and Scripts Updated
+
+### Test README Updated
+
+- [ ] `tests/README.md` created or updated (if `{update_readme}` true)
+- [ ] Test suite structure overview included
+- [ ] Test execution instructions provided (all, specific files, by priority)
+- [ ] Fixture usage examples provided
+- [ ] Factory usage examples provided
+- [ ] Priority tagging convention explained ([P0], [P1], [P2], [P3])
+- [ ] How to write new tests documented
+- [ ] Common patterns documented
+- [ ] Anti-patterns documented (what to avoid)
+
+### package.json Scripts Updated
+
+- [ ] package.json scripts added/updated (if `{update_package_scripts}` true)
+- [ ] `test:e2e` script for all E2E tests
+- [ ] `test:e2e:p0` script for P0 tests only
+- [ ] `test:e2e:p1` script for P0 + P1 tests
+- [ ] `test:api` script for API tests
+- [ ] `test:component` script for component tests
+- [ ] `test:unit` script for unit tests (if applicable)
+
+### Test Suite Executed
+
+- [ ] Test suite run locally (if `{run_tests_after_generation}` true)
+- [ ] Test results captured (passing/failing counts)
+- [ ] No flaky patterns detected (tests are deterministic)
+- [ ] Setup requirements documented (if any)
+- [ ] Known issues documented (if any)
+
+---
+
+## Step 6: Automation Summary Generated
+
+### Automation Summary Document
+
+- [ ] Output file created at `{output_summary}`
+- [ ] Document includes execution mode (BMad-Integrated, Standalone, Auto-discover)
+- [ ] Feature analysis included (source files, coverage gaps) - Standalone mode
+- [ ] Tests created listed (E2E, API, Component, Unit) with counts and paths
+- [ ] Infrastructure created listed (fixtures, factories, helpers)
+- [ ] Test execution instructions provided
+- [ ] Coverage analysis included:
+  - [ ] Total test count
+  - [ ] Priority breakdown (P0, P1, P2, P3 counts)
+  - [ ] Test level breakdown (E2E, API, Component, Unit counts)
+  - [ ] Coverage percentage (if calculated)
+  - [ ] Coverage status (acceptance criteria covered, gaps identified)
+- [ ] Definition of Done checklist included
+- [ ] Next steps provided
+- [ ] Recommendations included (if Standalone mode)
+
+### Summary Provided to User
+
+- [ ] Concise summary output provided
+- [ ] Total tests created across test levels
+- [ ] Priority breakdown (P0, P1, P2, P3 counts)
+- [ ] Infrastructure counts (fixtures, factories, helpers)
+- [ ] Test execution command provided
+- [ ] Output file path provided
+- [ ] Next steps listed
+
+---
+
+## Quality Checks
+
+### Test Design Quality
+
+- [ ] Tests are readable (clear Given-When-Then structure)
+- [ ] Tests are maintainable (use factories/fixtures, not hardcoded data)
+- [ ] Tests are isolated (no shared state between tests)
+- [ ] Tests are deterministic (no race conditions or flaky patterns)
+- [ ] Tests are atomic (one assertion per test)
+- [ ] Tests are fast (no unnecessary waits or delays)
+- [ ] Tests are lean (files under {max_file_lines} lines)
+
+### Knowledge Base Integration
+
+- [ ] Test level selection framework applied (from `test-levels-framework.md`)
+- [ ] Priority classification applied (from `test-priorities.md`)
+- [ ] Fixture architecture patterns applied (from `fixture-architecture.md`)
+- [ ] Data factory patterns applied (from `data-factories.md`)
+- [ ] Selective testing strategies considered (from `selective-testing.md`)
+- [ ] Flaky test detection patterns considered (from `ci-burn-in.md`)
+- [ ] Test quality principles applied (from `test-quality.md`)
+
+### Code Quality
+
+- [ ] All TypeScript types are correct and complete
+- [ ] No linting errors in generated test files
+- [ ] Consistent naming conventions followed
+- [ ] Imports are organized and correct
+- [ ] Code follows project style guide
+- [ ] No console.log or debug statements in test code
+
+---
+
+## Integration Points
+
+### With Framework Workflow
+
+- [ ] Test framework configuration detected and used
+- [ ] Directory structure matches framework setup
+- [ ] Fixtures and helpers follow established patterns
+- [ ] Naming conventions consistent with framework standards
+
+### With BMad Workflows (If Available - OPTIONAL)
+
+**With Story Workflow:**
+
+- [ ] Story ID correctly referenced in output (if story available)
+- [ ] Acceptance criteria from story reflected in tests (if story available)
+- [ ] Technical constraints from story considered (if story available)
+
+**With test-design Workflow:**
+
+- [ ] P0 scenarios from test-design prioritized (if test-design available)
+- [ ] Risk assessment from test-design considered (if test-design available)
+- [ ] Coverage strategy aligned with test-design (if test-design available)
+
+**With atdd Workflow:**
+
+- [ ] ATDD artifacts provided or located (manual handoff; `atdd` not auto-run)
+- [ ] Existing ATDD tests checked (if story had ATDD workflow run)
+- [ ] Expansion beyond ATDD planned (edge cases, negative paths)
+- [ ] No duplicate coverage with ATDD tests
+
+### With CI Pipeline
+
+- [ ] Tests can run in CI environment
+- [ ] Tests are parallelizable (no shared state)
+- [ ] Tests have appropriate timeouts
+- [ ] Tests clean up their data (no CI environment pollution)
+
+---
+
+## Completion Criteria
+
+All of the following must be true before marking this workflow as complete:
+
+- [ ] **Execution mode determined** (BMad-Integrated, Standalone, or Auto-discover)
+- [ ] **Framework configuration loaded** and validated
+- [ ] **Coverage analysis completed** (gaps identified if analyze_coverage true)
+- [ ] **Automation targets identified** (what needs testing)
+- [ ] **Test levels selected** appropriately (E2E, API, Component, Unit)
+- [ ] **Duplicate coverage avoided** (same behavior not tested at multiple levels)
+- [ ] **Test priorities assigned** (P0, P1, P2, P3)
+- [ ] **Fixture architecture created/enhanced** with auto-cleanup
+- [ ] **Data factories created/enhanced** using faker (no hardcoded data)
+- [ ] **Helper utilities created/enhanced** (if needed)
+- [ ] **Test files generated** at appropriate levels (E2E, API, Component, Unit)
+- [ ] **Given-When-Then format used** consistently across all tests
+- [ ] **Priority tags added** to all test names ([P0], [P1], [P2], [P3])
+- [ ] **data-testid selectors used** in E2E tests (not CSS classes)
+- [ ] **Network-first pattern applied** (route interception before navigation)
+- [ ] **Quality standards enforced** (no hard waits, no flaky patterns, self-cleaning, deterministic)
+- [ ] **Test README updated** with execution instructions and patterns
+- [ ] **package.json scripts updated** with test execution commands
+- [ ] **Test suite run locally** (if run_tests_after_generation true)
+- [ ] **Tests validated** (if auto_validate enabled)
+- [ ] **Failures healed** (if auto_heal_failures enabled and tests failed)
+- [ ] **Healing report generated** (if healing attempted)
+- [ ] **Unfixable tests marked** with test.fixme() and detailed comments (if any)
+- [ ] **Automation summary created** and saved to correct location
+- [ ] **Output file formatted correctly**
+- [ ] **Knowledge base references applied** and documented (including healing fragments if used)
+- [ ] **No test quality issues** (flaky patterns, race conditions, hardcoded data, page objects)
+
+---
+
+## Common Issues and Resolutions
+
+### Issue: BMad artifacts not found
+
+**Problem:** Story, tech-spec, or PRD files not found when variables are set.
+
+**Resolution:**
+
+- **automate does NOT require BMad artifacts** - they are OPTIONAL enhancements
+- If files not found, switch to Standalone Mode automatically
+- Analyze source code directly without BMad context
+- Continue workflow without halting
+
+### Issue: Framework configuration not found
+
+**Problem:** No playwright.config.ts or cypress.config.ts found.
+
+**Resolution:**
+
+- **HALT workflow** - framework is required
+- Message: "Framework scaffolding required. Run `bmad tea *framework` first."
+- User must run framework workflow before automate
+
+### Issue: No automation targets identified
+
+**Problem:** Neither story, target_feature, nor target_files specified, and auto-discover finds nothing.
+
+**Resolution:**
+
+- Check if source_dir variable is correct
+- Verify source code exists in project
+- Ask user to specify target_feature or target_files explicitly
+- Provide examples: `target_feature: "src/auth/"` or `target_files: "src/auth/login.ts,src/auth/session.ts"`
+
+### Issue: Duplicate coverage detected
+
+**Problem:** Same behavior tested at multiple levels (E2E + API + Component).
+
+**Resolution:**
+
+- Review test level selection framework (test-levels-framework.md)
+- Use E2E for critical happy path ONLY
+- Use API for business logic variations
+- Use Component for UI edge cases
+- Remove redundant tests that duplicate coverage
+
+### Issue: Tests have hardcoded data
+
+**Problem:** Tests use hardcoded email addresses, passwords, or other data.
+
+**Resolution:**
+
+- Replace all hardcoded data with factory function calls
+- Use faker for all random data generation
+- Update data-factories to support all required test scenarios
+- Example: `createUser({ email: faker.internet.email() })`
+
+### Issue: Tests are flaky
+
+**Problem:** Tests fail intermittently, pass on retry.
+
+**Resolution:**
+
+- Remove all hard waits (`page.waitForTimeout()`)
+- Use explicit waits (`page.waitForSelector()`)
+- Apply network-first pattern (route interception before navigation)
+- Remove conditional flow (`if (await element.isVisible())`)
+- Ensure tests are deterministic (no race conditions)
+- Run burn-in loop (10 iterations) to detect flakiness
+
+### Issue: Fixtures don't clean up data
+
+**Problem:** Test data persists after test run, causing test pollution.
+
+**Resolution:**
+
+- Ensure all fixtures have cleanup in teardown phase
+- Cleanup happens AFTER `await use(data)`
+- Call deletion/cleanup functions (deleteUser, deleteProduct, etc.)
+- Verify cleanup works by checking database/storage after test run
+
+### Issue: Tests too slow
+
+**Problem:** Tests take longer than 90 seconds (max_test_duration).
+
+**Resolution:**
+
+- Remove unnecessary waits and delays
+- Use parallel execution where possible
+- Mock external services (don't make real API calls)
+- Use API tests instead of E2E for business logic
+- Optimize test data creation (use in-memory database, etc.)
+
+---
+
+## Notes for TEA Agent
+
+- **automate is flexible:** Can work with or without BMad artifacts (story, tech-spec, PRD are OPTIONAL)
+- **Standalone mode is powerful:** Analyze any codebase and generate tests independently
+- **Auto-discover mode:** Scan codebase for features needing tests when no targets specified
+- **Framework is the ONLY hard requirement:** HALT if framework config missing, otherwise proceed
+- **Avoid duplicate coverage:** E2E for critical paths only, API/Component for variations
+- **Priority tagging enables selective execution:** P0 tests run on every commit, P1 on PR, P2 nightly
+- **Network-first pattern prevents race conditions:** Route interception BEFORE navigation
+- **No page objects:** Keep tests simple, direct, and maintainable
+- **Use knowledge base:** Load relevant fragments (test-levels, test-priorities, fixture-architecture, data-factories, healing patterns) for guidance
+- **Deterministic tests only:** No hard waits, no conditional flow, no flaky patterns allowed
+- **Optional healing:** auto_heal_failures disabled by default (opt-in for automatic test healing)
+- **Graceful degradation:** Healing works without Playwright MCP (pattern-based fallback)
+- **Unfixable tests handled:** Mark with test.fixme() and detailed comments (not silently broken)