siesa-agents 2.1.40 → 2.1.41

package/bmad/bmm/workflows/testarch/atdd/checklist.md

@@ -1,374 +1,374 @@
-# ATDD Workflow Validation Checklist
-
-Use this checklist to validate that the ATDD workflow has been executed correctly and all deliverables meet quality standards.
-
-## Prerequisites
-
-Before starting this workflow, verify:
-
-- [ ] Story approved with clear acceptance criteria (AC must be testable)
-- [ ] Development sandbox/environment ready
-- [ ] Framework scaffolding exists (run `framework` workflow if missing)
-- [ ] Test framework configuration available (playwright.config.ts or cypress.config.ts)
-- [ ] Package.json has test dependencies installed (Playwright or Cypress)
-
-**Halt if missing:** Framework scaffolding or story acceptance criteria
-
----
-
-## Step 1: Story Context and Requirements
-
-- [ ] Story markdown file loaded and parsed successfully
-- [ ] All acceptance criteria identified and extracted
-- [ ] Affected systems and components identified
-- [ ] Technical constraints documented
-- [ ] Framework configuration loaded (playwright.config.ts or cypress.config.ts)
-- [ ] Test directory structure identified from config
-- [ ] Existing fixture patterns reviewed for consistency
-- [ ] Similar test patterns searched and found in `{test_dir}`
-- [ ] Knowledge base fragments loaded:
-  - [ ] `fixture-architecture.md`
-  - [ ] `data-factories.md`
-  - [ ] `component-tdd.md`
-  - [ ] `network-first.md`
-  - [ ] `test-quality.md`
-
----
-
-## Step 2: Test Level Selection and Strategy
-
-- [ ] Each acceptance criterion analyzed for appropriate test level
-- [ ] Test level selection framework applied (E2E vs API vs Component vs Unit)
-- [ ] E2E tests: Critical user journeys and multi-system integration identified
-- [ ] API tests: Business logic and service contracts identified
-- [ ] Component tests: UI component behavior and interactions identified
-- [ ] Unit tests: Pure logic and edge cases identified (if applicable)
-- [ ] Duplicate coverage avoided (same behavior not tested at multiple levels unnecessarily)
-- [ ] Tests prioritized using P0-P3 framework (if test-design document exists)
-- [ ] Primary test level set in `primary_level` variable (typically E2E or API)
-- [ ] Test levels documented in ATDD checklist
-
----
-
-## Step 3: Failing Tests Generated
-
-### Test File Structure Created
-
-- [ ] Test files organized in appropriate directories:
-  - [ ] `tests/e2e/` for end-to-end tests
-  - [ ] `tests/api/` for API tests
-  - [ ] `tests/component/` for component tests
-  - [ ] `tests/support/` for infrastructure (fixtures, factories, helpers)
-
-### E2E Tests (If Applicable)
-
-- [ ] E2E test files created in `tests/e2e/`
-- [ ] All tests follow Given-When-Then format
-- [ ] Tests use `data-testid` selectors (not CSS classes or fragile selectors)
-- [ ] One assertion per test (atomic test design)
-- [ ] No hard waits or sleeps (explicit waits only)
-- [ ] Network-first pattern applied (route interception BEFORE navigation)
-- [ ] Tests fail initially (RED phase verified by local test run)
-- [ ] Failure messages are clear and actionable
-
-### API Tests (If Applicable)
-
-- [ ] API test files created in `tests/api/`
-- [ ] Tests follow Given-When-Then format
-- [ ] API contracts validated (request/response structure)
-- [ ] HTTP status codes verified
-- [ ] Response body validation includes all required fields
-- [ ] Error cases tested (400, 401, 403, 404, 500)
-- [ ] Tests fail initially (RED phase verified)
-
-### Component Tests (If Applicable)
-
-- [ ] Component test files created in `tests/component/`
-- [ ] Tests follow Given-When-Then format
-- [ ] Component mounting works correctly
-- [ ] Interaction testing covers user actions (click, hover, keyboard)
-- [ ] State management within component validated
-- [ ] Props and events tested
-- [ ] Tests fail initially (RED phase verified)
-
-### Test Quality Validation
-
-- [ ] All tests use Given-When-Then structure with clear comments
-- [ ] All tests have descriptive names explaining what they test
-- [ ] No duplicate tests (same behavior tested multiple times)
-- [ ] No flaky patterns (race conditions, timing issues)
-- [ ] No test interdependencies (tests can run in any order)
-- [ ] Tests are deterministic (same input always produces same result)
-
----
-
-## Step 4: Data Infrastructure Built
-
-### Data Factories Created
-
-- [ ] Factory files created in `tests/support/factories/`
-- [ ] All factories use `@faker-js/faker` for random data generation (no hardcoded values)
-- [ ] Factories support overrides for specific test scenarios
-- [ ] Factories generate complete valid objects matching API contracts
-- [ ] Helper functions for bulk creation provided (e.g., `createUsers(count)`)
-- [ ] Factory exports are properly typed (TypeScript)
-
-### Test Fixtures Created
-
-- [ ] Fixture files created in `tests/support/fixtures/`
-- [ ] All fixtures use Playwright's `test.extend()` pattern
-- [ ] Fixtures have setup phase (arrange test preconditions)
-- [ ] Fixtures provide data to tests via `await use(data)`
-- [ ] Fixtures have teardown phase with auto-cleanup (delete created data)
-- [ ] Fixtures are composable (can use other fixtures if needed)
-- [ ] Fixtures are isolated (each test gets fresh data)
-- [ ] Fixtures are type-safe (TypeScript types defined)
-
-### Mock Requirements Documented
-
-- [ ] External service mocking requirements identified
-- [ ] Mock endpoints documented with URLs and methods
-- [ ] Success response examples provided
-- [ ] Failure response examples provided
-- [ ] Mock requirements documented in ATDD checklist for DEV team
-
-### data-testid Requirements Listed
-
-- [ ] All required data-testid attributes identified from E2E tests
-- [ ] data-testid list organized by page or component
-- [ ] Each data-testid has clear description of element it targets
-- [ ] data-testid list included in ATDD checklist for DEV team
-
----
-
-## Step 5: Implementation Checklist Created
-
-- [ ] Implementation checklist created with clear structure
-- [ ] Each failing test mapped to concrete implementation tasks
-- [ ] Tasks include:
-  - [ ] Route/component creation
-  - [ ] Business logic implementation
-  - [ ] API integration
-  - [ ] data-testid attribute additions
-  - [ ] Error handling
-  - [ ] Test execution command
-  - [ ] Completion checkbox
-- [ ] Red-Green-Refactor workflow documented in checklist
-- [ ] RED phase marked as complete (TEA responsibility)
-- [ ] GREEN phase tasks listed for DEV team
-- [ ] REFACTOR phase guidance provided
-- [ ] Execution commands provided:
-  - [ ] Run all tests: `npm run test:e2e`
-  - [ ] Run specific test file
-  - [ ] Run in headed mode
-  - [ ] Debug specific test
-- [ ] Estimated effort included (hours or story points)
-
----
-
-## Step 6: Deliverables Generated
-
-### ATDD Checklist Document Created
-
-- [ ] Output file created at `{output_folder}/atdd-checklist-{story_id}.md`
-- [ ] Document follows template structure from `atdd-checklist-template.md`
-- [ ] Document includes all required sections:
-  - [ ] Story summary
-  - [ ] Acceptance criteria breakdown
-  - [ ] Failing tests created (paths and line counts)
-  - [ ] Data factories created
-  - [ ] Fixtures created
-  - [ ] Mock requirements
-  - [ ] Required data-testid attributes
-  - [ ] Implementation checklist
-  - [ ] Red-green-refactor workflow
-  - [ ] Execution commands
-  - [ ] Next steps for DEV team
-- [ ] Output shared with DEV workflow (manual handoff; not auto-consumed)
-
-### All Tests Verified to Fail (RED Phase)
-
-- [ ] Full test suite run locally before finalizing
-- [ ] All tests fail as expected (RED phase confirmed)
-- [ ] No tests passing before implementation (if passing, test is invalid)
-- [ ] Failure messages documented in ATDD checklist
-- [ ] Failures are due to missing implementation, not test bugs
-- [ ] Test run output captured for reference
-
-### Summary Provided
-
-- [ ] Summary includes:
-  - [ ] Story ID
-  - [ ] Primary test level
-  - [ ] Test counts (E2E, API, Component)
-  - [ ] Test file paths
-  - [ ] Factory count
-  - [ ] Fixture count
-  - [ ] Mock requirements count
-  - [ ] data-testid count
-  - [ ] Implementation task count
-  - [ ] Estimated effort
-  - [ ] Next steps for DEV team
-  - [ ] Output file path
-  - [ ] Knowledge base references applied
-
----
-
-## Quality Checks
-
-### Test Design Quality
-
-- [ ] Tests are readable (clear Given-When-Then structure)
-- [ ] Tests are maintainable (use factories and fixtures, not hardcoded data)
-- [ ] Tests are isolated (no shared state between tests)
-- [ ] Tests are deterministic (no race conditions or flaky patterns)
-- [ ] Tests are atomic (one assertion per test)
-- [ ] Tests are fast (no unnecessary waits or delays)
-
-### Knowledge Base Integration
-
-- [ ] fixture-architecture.md patterns applied to all fixtures
-- [ ] data-factories.md patterns applied to all factories
-- [ ] network-first.md patterns applied to E2E tests with network requests
-- [ ] component-tdd.md patterns applied to component tests
-- [ ] test-quality.md principles applied to all test design
-
-### Code Quality
-
-- [ ] All TypeScript types are correct and complete
-- [ ] No linting errors in generated test files
-- [ ] Consistent naming conventions followed
-- [ ] Imports are organized and correct
-- [ ] Code follows project style guide
-
----
-
-## Integration Points
-
-### With DEV Agent
-
-- [ ] ATDD checklist provides clear implementation guidance
-- [ ] Implementation tasks are granular and actionable
-- [ ] data-testid requirements are complete and clear
-- [ ] Mock requirements include all necessary details
-- [ ] Execution commands work correctly
-
-### With Story Workflow
-
-- [ ] Story ID correctly referenced in output files
-- [ ] Acceptance criteria from story accurately reflected in tests
-- [ ] Technical constraints from story considered in test design
-
-### With Framework Workflow
-
-- [ ] Test framework configuration correctly detected and used
-- [ ] Directory structure matches framework setup
-- [ ] Fixtures and helpers follow established patterns
-- [ ] Naming conventions consistent with framework standards
-
-### With test-design Workflow (If Available)
-
-- [ ] P0 scenarios from test-design prioritized in ATDD
-- [ ] Risk assessment from test-design considered in test coverage
-- [ ] Coverage strategy from test-design aligned with ATDD tests
-
----
-
-## Completion Criteria
-
-All of the following must be true before marking this workflow as complete:
-
-- [ ] **Story acceptance criteria analyzed** and mapped to appropriate test levels
-- [ ] **Failing tests created** at all appropriate levels (E2E, API, Component)
-- [ ] **Given-When-Then format** used consistently across all tests
-- [ ] **RED phase verified** by local test run (all tests failing as expected)
-- [ ] **Network-first pattern** applied to E2E tests with network requests
-- [ ] **Data factories created** using faker (no hardcoded test data)
-- [ ] **Fixtures created** with auto-cleanup in teardown
-- [ ] **Mock requirements documented** for external services
-- [ ] **data-testid attributes listed** for DEV team
-- [ ] **Implementation checklist created** mapping tests to code tasks
-- [ ] **Red-green-refactor workflow documented** in ATDD checklist
-- [ ] **Execution commands provided** and verified to work
-- [ ] **ATDD checklist document created** and saved to correct location
-- [ ] **Output file formatted correctly** using template structure
-- [ ] **Knowledge base references applied** and documented in summary
-- [ ] **No test quality issues** (flaky patterns, race conditions, hardcoded data)
-
----
-
-## Common Issues and Resolutions
-
-### Issue: Tests pass before implementation
-
-**Problem:** A test passes even though no implementation code exists yet.
-
-**Resolution:**
-
-- Review test to ensure it's testing actual behavior, not mocked/stubbed behavior
-- Check if test is accidentally using existing functionality
-- Verify test assertions are correct and meaningful
-- Rewrite test to fail until implementation is complete
-
-### Issue: Network-first pattern not applied
-
-**Problem:** Route interception happens after navigation, causing race conditions.
-
-**Resolution:**
-
-- Move `await page.route()` calls BEFORE `await page.goto()`
-- Review `network-first.md` knowledge fragment
-- Update all E2E tests to follow network-first pattern
-
-### Issue: Hardcoded test data in tests
-
-**Problem:** Tests use hardcoded strings/numbers instead of factories.
-
-**Resolution:**
-
-- Replace all hardcoded data with factory function calls
-- Use `faker` for all random data generation
-- Update data-factories to support all required test scenarios
-
-### Issue: Fixtures missing auto-cleanup
-
-**Problem:** Fixtures create data but don't clean it up in teardown.
-
-**Resolution:**
-
-- Add cleanup logic after `await use(data)` in fixture
-- Call deletion/cleanup functions in teardown
-- Verify cleanup works by checking database/storage after test run
-
-### Issue: Tests have multiple assertions
-
-**Problem:** Tests verify multiple behaviors in single test (not atomic).
-
-**Resolution:**
-
-- Split into separate tests (one assertion per test)
-- Each test should verify exactly one behavior
-- Use descriptive test names to clarify what each test verifies
-
-### Issue: Tests depend on execution order
-
-**Problem:** Tests fail when run in isolation or different order.
-
-**Resolution:**
-
-- Remove shared state between tests
-- Each test should create its own test data
-- Use fixtures for consistent setup across tests
-- Verify tests can run with `.only` flag
-
----
-
-## Notes for TEA Agent
-
-- **Preflight halt is critical:** Do not proceed if story has no acceptance criteria or framework is missing
-- **RED phase verification is mandatory:** Tests must fail before sharing with DEV team
-- **Network-first pattern:** Route interception BEFORE navigation prevents race conditions
-- **One assertion per test:** Atomic tests provide clear failure diagnosis
-- **Auto-cleanup is non-negotiable:** Every fixture must clean up data in teardown
-- **Use knowledge base:** Load relevant fragments (fixture-architecture, data-factories, network-first, component-tdd, test-quality) for guidance
-- **Share with DEV agent:** ATDD checklist provides implementation roadmap from red to green
+# ATDD Workflow Validation Checklist
+
+Use this checklist to validate that the ATDD workflow has been executed correctly and all deliverables meet quality standards.
+
+## Prerequisites
+
+Before starting this workflow, verify:
+
+- [ ] Story approved with clear acceptance criteria (AC must be testable)
+- [ ] Development sandbox/environment ready
+- [ ] Framework scaffolding exists (run `framework` workflow if missing)
+- [ ] Test framework configuration available (playwright.config.ts or cypress.config.ts)
+- [ ] Package.json has test dependencies installed (Playwright or Cypress)
+
+**Halt if missing:** Framework scaffolding or story acceptance criteria
+
+---
+
+## Step 1: Story Context and Requirements
+
+- [ ] Story markdown file loaded and parsed successfully
+- [ ] All acceptance criteria identified and extracted
+- [ ] Affected systems and components identified
+- [ ] Technical constraints documented
+- [ ] Framework configuration loaded (playwright.config.ts or cypress.config.ts)
+- [ ] Test directory structure identified from config
+- [ ] Existing fixture patterns reviewed for consistency
+- [ ] Similar test patterns searched and found in `{test_dir}`
+- [ ] Knowledge base fragments loaded:
+  - [ ] `fixture-architecture.md`
+  - [ ] `data-factories.md`
+  - [ ] `component-tdd.md`
+  - [ ] `network-first.md`
+  - [ ] `test-quality.md`
+
+---
+
+## Step 2: Test Level Selection and Strategy
+
+- [ ] Each acceptance criterion analyzed for appropriate test level
+- [ ] Test level selection framework applied (E2E vs API vs Component vs Unit)
+- [ ] E2E tests: Critical user journeys and multi-system integration identified
+- [ ] API tests: Business logic and service contracts identified
+- [ ] Component tests: UI component behavior and interactions identified
+- [ ] Unit tests: Pure logic and edge cases identified (if applicable)
+- [ ] Duplicate coverage avoided (same behavior not tested at multiple levels unnecessarily)
+- [ ] Tests prioritized using P0-P3 framework (if test-design document exists)
+- [ ] Primary test level set in `primary_level` variable (typically E2E or API)
+- [ ] Test levels documented in ATDD checklist
+
+---
+
+## Step 3: Failing Tests Generated
+
+### Test File Structure Created
+
+- [ ] Test files organized in appropriate directories:
+  - [ ] `tests/e2e/` for end-to-end tests
+  - [ ] `tests/api/` for API tests
+  - [ ] `tests/component/` for component tests
+  - [ ] `tests/support/` for infrastructure (fixtures, factories, helpers)
+
+### E2E Tests (If Applicable)
+
+- [ ] E2E test files created in `tests/e2e/`
+- [ ] All tests follow Given-When-Then format
+- [ ] Tests use `data-testid` selectors (not CSS classes or fragile selectors)
+- [ ] One assertion per test (atomic test design)
+- [ ] No hard waits or sleeps (explicit waits only)
+- [ ] Network-first pattern applied (route interception BEFORE navigation)
+- [ ] Tests fail initially (RED phase verified by local test run)
+- [ ] Failure messages are clear and actionable
+
+### API Tests (If Applicable)
+
+- [ ] API test files created in `tests/api/`
+- [ ] Tests follow Given-When-Then format
+- [ ] API contracts validated (request/response structure)
+- [ ] HTTP status codes verified
+- [ ] Response body validation includes all required fields
+- [ ] Error cases tested (400, 401, 403, 404, 500)
+- [ ] Tests fail initially (RED phase verified)
+
+### Component Tests (If Applicable)
+
+- [ ] Component test files created in `tests/component/`
+- [ ] Tests follow Given-When-Then format
+- [ ] Component mounting works correctly
+- [ ] Interaction testing covers user actions (click, hover, keyboard)
+- [ ] State management within component validated
+- [ ] Props and events tested
+- [ ] Tests fail initially (RED phase verified)
+
+### Test Quality Validation
+
+- [ ] All tests use Given-When-Then structure with clear comments
+- [ ] All tests have descriptive names explaining what they test
+- [ ] No duplicate tests (same behavior tested multiple times)
+- [ ] No flaky patterns (race conditions, timing issues)
+- [ ] No test interdependencies (tests can run in any order)
+- [ ] Tests are deterministic (same input always produces same result)
+
+---
+
+## Step 4: Data Infrastructure Built
+
+### Data Factories Created
+
+- [ ] Factory files created in `tests/support/factories/`
+- [ ] All factories use `@faker-js/faker` for random data generation (no hardcoded values)
+- [ ] Factories support overrides for specific test scenarios
+- [ ] Factories generate complete valid objects matching API contracts
+- [ ] Helper functions for bulk creation provided (e.g., `createUsers(count)`)
+- [ ] Factory exports are properly typed (TypeScript)
+
+### Test Fixtures Created
+
+- [ ] Fixture files created in `tests/support/fixtures/`
+- [ ] All fixtures use Playwright's `test.extend()` pattern
+- [ ] Fixtures have setup phase (arrange test preconditions)
+- [ ] Fixtures provide data to tests via `await use(data)`
+- [ ] Fixtures have teardown phase with auto-cleanup (delete created data)
+- [ ] Fixtures are composable (can use other fixtures if needed)
+- [ ] Fixtures are isolated (each test gets fresh data)
+- [ ] Fixtures are type-safe (TypeScript types defined)
+
+### Mock Requirements Documented
+
+- [ ] External service mocking requirements identified
+- [ ] Mock endpoints documented with URLs and methods
+- [ ] Success response examples provided
+- [ ] Failure response examples provided
+- [ ] Mock requirements documented in ATDD checklist for DEV team
+
+### data-testid Requirements Listed
+
+- [ ] All required data-testid attributes identified from E2E tests
+- [ ] data-testid list organized by page or component
+- [ ] Each data-testid has clear description of element it targets
+- [ ] data-testid list included in ATDD checklist for DEV team
+
+---
+
+## Step 5: Implementation Checklist Created
+
+- [ ] Implementation checklist created with clear structure
+- [ ] Each failing test mapped to concrete implementation tasks
+- [ ] Tasks include:
+  - [ ] Route/component creation
+  - [ ] Business logic implementation
+  - [ ] API integration
+  - [ ] data-testid attribute additions
+  - [ ] Error handling
+  - [ ] Test execution command
+  - [ ] Completion checkbox
+- [ ] Red-Green-Refactor workflow documented in checklist
+- [ ] RED phase marked as complete (TEA responsibility)
+- [ ] GREEN phase tasks listed for DEV team
+- [ ] REFACTOR phase guidance provided
+- [ ] Execution commands provided:
+  - [ ] Run all tests: `npm run test:e2e`
+  - [ ] Run specific test file
+  - [ ] Run in headed mode
+  - [ ] Debug specific test
+- [ ] Estimated effort included (hours or story points)
+
+---
+
+## Step 6: Deliverables Generated
+
+### ATDD Checklist Document Created
+
+- [ ] Output file created at `{output_folder}/atdd-checklist-{story_id}.md`
+- [ ] Document follows template structure from `atdd-checklist-template.md`
+- [ ] Document includes all required sections:
+  - [ ] Story summary
+  - [ ] Acceptance criteria breakdown
+  - [ ] Failing tests created (paths and line counts)
+  - [ ] Data factories created
+  - [ ] Fixtures created
+  - [ ] Mock requirements
+  - [ ] Required data-testid attributes
+  - [ ] Implementation checklist
+  - [ ] Red-green-refactor workflow
+  - [ ] Execution commands
+  - [ ] Next steps for DEV team
+- [ ] Output shared with DEV workflow (manual handoff; not auto-consumed)
+
+### All Tests Verified to Fail (RED Phase)
+
+- [ ] Full test suite run locally before finalizing
+- [ ] All tests fail as expected (RED phase confirmed)
+- [ ] No tests passing before implementation (if passing, test is invalid)
+- [ ] Failure messages documented in ATDD checklist
+- [ ] Failures are due to missing implementation, not test bugs
+- [ ] Test run output captured for reference
+
+### Summary Provided
+
+- [ ] Summary includes:
+  - [ ] Story ID
+  - [ ] Primary test level
+  - [ ] Test counts (E2E, API, Component)
+  - [ ] Test file paths
+  - [ ] Factory count
+  - [ ] Fixture count
+  - [ ] Mock requirements count
+  - [ ] data-testid count
+  - [ ] Implementation task count
+  - [ ] Estimated effort
+  - [ ] Next steps for DEV team
+  - [ ] Output file path
+  - [ ] Knowledge base references applied
+
+---
+
+## Quality Checks
+
+### Test Design Quality
+
+- [ ] Tests are readable (clear Given-When-Then structure)
+- [ ] Tests are maintainable (use factories and fixtures, not hardcoded data)
+- [ ] Tests are isolated (no shared state between tests)
+- [ ] Tests are deterministic (no race conditions or flaky patterns)
+- [ ] Tests are atomic (one assertion per test)
+- [ ] Tests are fast (no unnecessary waits or delays)
+
+### Knowledge Base Integration
+
+- [ ] fixture-architecture.md patterns applied to all fixtures
+- [ ] data-factories.md patterns applied to all factories
+- [ ] network-first.md patterns applied to E2E tests with network requests
+- [ ] component-tdd.md patterns applied to component tests
+- [ ] test-quality.md principles applied to all test design
+
+### Code Quality
+
+- [ ] All TypeScript types are correct and complete
+- [ ] No linting errors in generated test files
+- [ ] Consistent naming conventions followed
+- [ ] Imports are organized and correct
+- [ ] Code follows project style guide
+
+---
+
+## Integration Points
+
+### With DEV Agent
+
+- [ ] ATDD checklist provides clear implementation guidance
+- [ ] Implementation tasks are granular and actionable
+- [ ] data-testid requirements are complete and clear
+- [ ] Mock requirements include all necessary details
+- [ ] Execution commands work correctly
+
+### With Story Workflow
+
+- [ ] Story ID correctly referenced in output files
+- [ ] Acceptance criteria from story accurately reflected in tests
+- [ ] Technical constraints from story considered in test design
+
+### With Framework Workflow
+
+- [ ] Test framework configuration correctly detected and used
+- [ ] Directory structure matches framework setup
+- [ ] Fixtures and helpers follow established patterns
+- [ ] Naming conventions consistent with framework standards
+
+### With test-design Workflow (If Available)
+
+- [ ] P0 scenarios from test-design prioritized in ATDD
+- [ ] Risk assessment from test-design considered in test coverage
+- [ ] Coverage strategy from test-design aligned with ATDD tests
+
+---
+
+## Completion Criteria
+
+All of the following must be true before marking this workflow as complete:
+
+- [ ] **Story acceptance criteria analyzed** and mapped to appropriate test levels
+- [ ] **Failing tests created** at all appropriate levels (E2E, API, Component)
+- [ ] **Given-When-Then format** used consistently across all tests
+- [ ] **RED phase verified** by local test run (all tests failing as expected)
+- [ ] **Network-first pattern** applied to E2E tests with network requests
+- [ ] **Data factories created** using faker (no hardcoded test data)
+- [ ] **Fixtures created** with auto-cleanup in teardown
+- [ ] **Mock requirements documented** for external services
+- [ ] **data-testid attributes listed** for DEV team
+- [ ] **Implementation checklist created** mapping tests to code tasks
+- [ ] **Red-green-refactor workflow documented** in ATDD checklist
+- [ ] **Execution commands provided** and verified to work
+- [ ] **ATDD checklist document created** and saved to correct location
+- [ ] **Output file formatted correctly** using template structure
+- [ ] **Knowledge base references applied** and documented in summary
+- [ ] **No test quality issues** (flaky patterns, race conditions, hardcoded data)
+
+---
+
+## Common Issues and Resolutions
+
+### Issue: Tests pass before implementation
+
+**Problem:** A test passes even though no implementation code exists yet.
+
+**Resolution:**
+
+- Review test to ensure it's testing actual behavior, not mocked/stubbed behavior
+- Check if test is accidentally using existing functionality
+- Verify test assertions are correct and meaningful
+- Rewrite test to fail until implementation is complete
+
+### Issue: Network-first pattern not applied
+
+**Problem:** Route interception happens after navigation, causing race conditions.
+
+**Resolution:**
+
+- Move `await page.route()` calls BEFORE `await page.goto()`
+- Review `network-first.md` knowledge fragment
+- Update all E2E tests to follow network-first pattern
+
+### Issue: Hardcoded test data in tests
+
+**Problem:** Tests use hardcoded strings/numbers instead of factories.
+
+**Resolution:**
+
+- Replace all hardcoded data with factory function calls
+- Use `faker` for all random data generation
+- Update data-factories to support all required test scenarios
+
+### Issue: Fixtures missing auto-cleanup
+
+**Problem:** Fixtures create data but don't clean it up in teardown.
+
+**Resolution:**
+
+- Add cleanup logic after `await use(data)` in fixture
+- Call deletion/cleanup functions in teardown
+- Verify cleanup works by checking database/storage after test run
+
+### Issue: Tests have multiple assertions
+
+**Problem:** Tests verify multiple behaviors in single test (not atomic).
+
+**Resolution:**
+
+- Split into separate tests (one assertion per test)
+- Each test should verify exactly one behavior
+- Use descriptive test names to clarify what each test verifies
+
+### Issue: Tests depend on execution order
+
+**Problem:** Tests fail when run in isolation or different order.
+
+**Resolution:**
+
+- Remove shared state between tests
+- Each test should create its own test data
+- Use fixtures for consistent setup across tests
+- Verify tests can run with `.only` flag
+
+---
+
+## Notes for TEA Agent
+
+- **Preflight halt is critical:** Do not proceed if story has no acceptance criteria or framework is missing
+- **RED phase verification is mandatory:** Tests must fail before sharing with DEV team
+- **Network-first pattern:** Route interception BEFORE navigation prevents race conditions
+- **One assertion per test:** Atomic tests provide clear failure diagnosis
+- **Auto-cleanup is non-negotiable:** Every fixture must clean up data in teardown
+- **Use knowledge base:** Load relevant fragments (fixture-architecture, data-factories, network-first, component-tdd, test-quality) for guidance
+- **Share with DEV agent:** ATDD checklist provides implementation roadmap from red to green