@things-factory/figure-service 10.1.70 → 10.1.72

package/recipes/cabinet-doors/spec.json

@@ -0,0 +1,36 @@
+{
+  "name": "cabinet-doors",
+  "category": "storage",
+  "tags": [
+    "cabinet",
+    "door",
+    "storage"
+  ],
+  "title": {
+    "ko": "캐비닛 문",
+    "en": "cabinet doors"
+  },
+  "description": {
+    "ko": "고른 부품(캐비닛 몸체) 앞면을 덮는 여닫이 문을 한 장 또는 두 장 답니다.",
+    "en": "One or two hinged doors covering the front of the chosen part (a cabinet body)."
+  },
+  "params": [
+    {
+      "name": "doors",
+      "kind": "choice",
+      "default": 2,
+      "label": {
+        "ko": "문 수",
+        "en": "doors"
+      },
+      "hint": {
+        "ko": "2이면 가운데서 만나 양쪽으로 열린다",
+        "en": "two meet in the middle and open apart"
+      },
+      "options": [
+        1,
+        2
+      ]
+    }
+  ]
+}

package/recipes/cable-tray/build.mts

@@ -0,0 +1,16 @@
+/* 케이블 트레이 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 3000, y: 700, z: 800 }, 'TPL_CABLE_TRAY'))
+  m.box('floor', 3000, 10, 300)
+    .follow('floor', 'x', 'host', 'x')
+    .on('floor', 'bottom', 'host', 'top', { z: 'min' })
+    .colour('floor', 'palette.tray', '#9aa3ab')
+  for (const [lip, z] of [['lip-back', 'min'], ['lip-front', 'max']] as const)
+    m.box(lip, 3000, 60, 10)
+      .follow(lip, 'x', 'floor', 'x')
+      .on(lip, 'bottom', 'floor', 'top', { z })
+      .colour(lip, 'palette.tray', '#9aa3ab')
+  return m.asset
+}

package/recipes/cable-tray/facts.md

@@ -0,0 +1,3 @@
+# cable-tray — facts (not shown on screen; the guide's basis and our review)
+
+윗면 z 최소. 바닥 = 몸체 X × 폭(매개변수) × 10, 턱 둘 60×10 가장자리.

package/recipes/cable-tray/guide.en.md

@@ -0,0 +1,18 @@
+## When to use it
+
+For a cable tray along a machine or a conveyor.
+
+## Putting it in
+
+1. Choose the body; the tray runs along the back edge of its **top**.
+2. Set the **tray width** in mm.
+3. Press "put in".
+
+## Afterwards
+
+- The tray follows the body's length.
+- The parts are ordinary parts: change them one by one, or take them all out with one undo.
+
+## Good to know
+
+- Its lips are 60 mm high.

package/recipes/cable-tray/guide.ko.md

@@ -0,0 +1,18 @@
+## 언제 쓰나
+
+설비나 컨베이어를 따라 케이블 트레이를 놓을 때 씁니다.
+
+## 넣는 순서
+
+1. 몸체를 고릅니다. 트레이는 **윗면 뒤쪽 가장자리**를 따라 놓입니다.
+2. **트레이 폭**을 mm로 정합니다.
+3. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- 트레이 길이는 몸체 길이를 따릅니다.
+- 넣은 부품은 보통 부품이라 하나씩 고칠 수 있고, 되돌리기 한 번에 모두 빠집니다.
+
+## 알아 둘 것
+
+- 양쪽 턱은 60 mm 높이입니다.

package/recipes/cable-tray/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_CABLE_TRAY","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"floor.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"floor.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"lip-back.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"lip-back.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"lip-front.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"lip-front.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio.1","unit":"ratio","value":1},{"id":"k.ratio._0_5","unit":"ratio","value":-0.5}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.dimension.x.value","host.size.y","host.size.z"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"floor.shape","op":"box-shape@1","args":["floor.dimension.x.value","floor.dimension.height","floor.dimension.depth"],"outputs":{"shape":"floor.shapeValue"},"params":{"frame":"floor.local"}},{"id":"floor.pose","op":"rigid@1","args":["d.mm.0","floor.on.host.along.y.1.sum.value","floor.on.host.own-edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"floor.poseValue"},"params":{"from":"floor.local","to":"floor.seat"}},{"id":"floor","op":"place@1","args":["floor.shapeValue","floor.world.value"],"outputs":{"placed":"floor.placed"}},{"id":"floor.dimension.x","op":"mul@1","args":["host.dimension.x.value","k.ratio.1"],"outputs":{"value":"floor.dimension.x.value"}},{"id":"host.dimension.x","op":"mul@1","args":["host.size.x","k.ratio.1"],"outputs":{"value":"host.dimension.x.value"}},{"id":"lip-back.shape","op":"box-shape@1","args":["lip-back.dimension.x.value","lip-back.dimension.height","lip-back.dimension.depth"],"outputs":{"shape":"lip-back.shapeValue"},"params":{"frame":"lip-back.local"}},{"id":"lip-back.pose","op":"rigid@1","args":["d.mm.0","lip-back.on.floor.along.y.1.sum.value","lip-back.on.floor.own-edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"lip-back.poseValue"},"params":{"from":"lip-back.local","to":"lip-back.seat"}},{"id":"lip-back","op":"place@1","args":["lip-back.shapeValue","lip-back.world.value"],"outputs":{"placed":"lip-back.placed"}},{"id":"lip-back.dimension.x","op":"mul@1","args":["floor.dimension.x.value","k.ratio.1"],"outputs":{"value":"lip-back.dimension.x.value"}},{"id":"lip-front.shape","op":"box-shape@1","args":["lip-front.dimension.x.value","lip-front.dimension.height","lip-front.dimension.depth"],"outputs":{"shape":"lip-front.shapeValue"},"params":{"frame":"lip-front.local"}},{"id":"lip-front.pose","op":"rigid@1","args":["d.mm.0","lip-front.on.floor.along.y.1.sum.value","lip-front.on.floor.own-edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"lip-front.poseValue"},"params":{"from":"lip-front.local","to":"lip-front.seat"}},{"id":"lip-front","op":"place@1","args":["lip-front.shapeValue","lip-front.world.value"],"outputs":{"placed":"lip-front.placed"}},{"id":"lip-front.dimension.x","op":"mul@1","args":["floor.dimension.x.value","k.ratio.1"],"outputs":{"value":"lip-front.dimension.x.value"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"floor.on.host.seat.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"floor.on.host.seat.y.0.times.value"}},{"id":"floor.on.host.along.y.0.times","op":"mul@1","args":["floor.dimension.height","k.ratio.0_5"],"outputs":{"value":"floor.on.host.along.y.0.times.value"}},{"id":"floor.on.host.along.y.1.sum","op":"add@1","args":["floor.on.host.along.y.0.times.value","d.mm.0"],"outputs":{"value":"floor.on.host.along.y.1.sum.value"}},{"id":"floor.on.host.edge.z.0.times","op":"mul@1","args":["host.size.z","k.ratio._0_5"],"outputs":{"value":"floor.on.host.edge.z.0.times.value"}},{"id":"floor.on.host.own-edge.z.0.times","op":"mul@1","args":["floor.dimension.depth","k.ratio.0_5"],"outputs":{"value":"floor.on.host.own-edge.z.0.times.value"}},{"id":"floor.seat.rigid","op":"rigid@1","args":["d.mm.0","floor.on.host.seat.y.0.times.value","floor.on.host.edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"floor.seat.value"},"params":{"from":"floor.seat","to":"host.local"}},{"id":"floor.chain","op":"compose@1","args":["floor.seat.value","floor.poseValue"],"outputs":{"pose":"floor.chain.value"}},{"id":"floor.world","op":"compose@1","args":["host.chain.value","floor.chain.value"],"outputs":{"pose":"floor.world.value"}},{"id":"lip-back.on.floor.seat.y.0.times","op":"mul@1","args":["floor.dimension.height","k.ratio.0_5"],"outputs":{"value":"lip-back.on.floor.seat.y.0.times.value"}},{"id":"lip-back.on.floor.along.y.0.times","op":"mul@1","args":["lip-back.dimension.height","k.ratio.0_5"],"outputs":{"value":"lip-back.on.floor.along.y.0.times.value"}},{"id":"lip-back.on.floor.along.y.1.sum","op":"add@1","args":["lip-back.on.floor.along.y.0.times.value","d.mm.0"],"outputs":{"value":"lip-back.on.floor.along.y.1.sum.value"}},{"id":"lip-back.on.floor.edge.z.0.times","op":"mul@1","args":["floor.dimension.depth","k.ratio._0_5"],"outputs":{"value":"lip-back.on.floor.edge.z.0.times.value"}},{"id":"lip-back.on.floor.own-edge.z.0.times","op":"mul@1","args":["lip-back.dimension.depth","k.ratio.0_5"],"outputs":{"value":"lip-back.on.floor.own-edge.z.0.times.value"}},{"id":"lip-back.seat.rigid","op":"rigid@1","args":["d.mm.0","lip-back.on.floor.seat.y.0.times.value","lip-back.on.floor.edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"lip-back.seat.value"},"params":{"from":"lip-back.seat","to":"floor.local"}},{"id":"lip-back.chain","op":"compose@1","args":["lip-back.seat.value","lip-back.poseValue"],"outputs":{"pose":"lip-back.chain.value"}},{"id":"lip-back.world","op":"compose@1","args":["floor.world.value","lip-back.chain.value"],"outputs":{"pose":"lip-back.world.value"}},{"id":"lip-front.on.floor.seat.y.0.times","op":"mul@1","args":["floor.dimension.height","k.ratio.0_5"],"outputs":{"value":"lip-front.on.floor.seat.y.0.times.value"}},{"id":"lip-front.on.floor.along.y.0.times","op":"mul@1","args":["lip-front.dimension.height","k.ratio.0_5"],"outputs":{"value":"lip-front.on.floor.along.y.0.times.value"}},{"id":"lip-front.on.floor.along.y.1.sum","op":"add@1","args":["lip-front.on.floor.along.y.0.times.value","d.mm.0"],"outputs":{"value":"lip-front.on.floor.along.y.1.sum.value"}},{"id":"lip-front.on.floor.edge.z.0.times","op":"mul@1","args":["floor.dimension.depth","k.ratio.0_5"],"outputs":{"value":"lip-front.on.floor.edge.z.0.times.value"}},{"id":"lip-front.on.floor.own-edge.z.0.times","op":"mul@1","args":["lip-front.dimension.depth","k.ratio._0_5"],"outputs":{"value":"lip-front.on.floor.own-edge.z.0.times.value"}},{"id":"lip-front.seat.rigid","op":"rigid@1","args":["d.mm.0","lip-front.on.floor.seat.y.0.times.value","lip-front.on.floor.edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"lip-front.seat.value"},"params":{"from":"lip-front.seat","to":"floor.local"}},{"id":"lip-front.chain","op":"compose@1","args":["lip-front.seat.value","lip-front.poseValue"],"outputs":{"pose":"lip-front.chain.value"}},{"id":"lip-front.world","op":"compose@1","args":["floor.world.value","lip-front.chain.value"],"outputs":{"pose":"lip-front.world.value"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":3000,"host.size.y":700,"host.size.z":800,"floor.dimension.height":10,"floor.dimension.depth":300,"lip-back.dimension.height":60,"lip-back.dimension.depth":10,"lip-front.dimension.height":60,"lip-front.dimension.depth":10},"stateDefaults":{},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-9aa3ab":"#9aa3ab"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"floor","material":{"token":"palette.tpl-9aa3ab"}},{"target":"lip-back","material":{"token":"palette.tpl-9aa3ab"}},{"target":"lip-front","material":{"token":"palette.tpl-9aa3ab"}}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"floor","type":"fixed","body0":{"part":"host","face":"top"},"body1":{"part":"floor","face":"bottom"},"origin":{"align":{"z":"min"}}},{"id":"lip-back","type":"fixed","body0":{"part":"floor","face":"top"},"body1":{"part":"lip-back","face":"bottom"},"origin":{"align":{"z":"min"}}},{"id":"lip-front","type":"fixed","body0":{"part":"floor","face":"top"},"body1":{"part":"lip-front","face":"bottom"},"origin":{"align":{"z":"max"}}}]}

package/recipes/cable-tray/recipe.json

@@ -0,0 +1,198 @@
+{
+  "name": "cable-tray",
+  "title": {
+    "ko": "케이블 트레이",
+    "en": "cable tray"
+  },
+  "description": {
+    "ko": "고른 부품 윗면의 뒤쪽 가장자리를 따라 케이블 트레이를 놓습니다.",
+    "en": "A cable tray along the back edge of the chosen part's top."
+  },
+  "category": "control",
+  "tags": [
+    "cable",
+    "tray",
+    "electrical"
+  ],
+  "target": "part",
+  "params": [
+    {
+      "name": "width",
+      "kind": "mm",
+      "default": 300,
+      "label": {
+        "ko": "트레이 폭 (mm)",
+        "en": "tray width (mm)"
+      },
+      "hint": {
+        "ko": "트레이 바닥의 폭",
+        "en": "the width of the tray's floor"
+      },
+      "min": 100,
+      "max": 1000
+    }
+  ],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-floor",
+        "kind": "box",
+        "dimensions": {
+          "width": 3000,
+          "height": 10,
+          "depth": {
+            "param": "width"
+          }
+        }
+      }
+    },
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-lip-back",
+        "kind": "box",
+        "dimensions": {
+          "width": 3000,
+          "height": 60,
+          "depth": 10
+        }
+      }
+    },
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-lip-front",
+        "kind": "box",
+        "dimensions": {
+          "width": 3000,
+          "height": 60,
+          "depth": 10
+        }
+      }
+    },
+    {
+      "kind": "link-dimension",
+      "part": "{id}-floor",
+      "axis": "x",
+      "source": {
+        "of": "part",
+        "part": "{target}",
+        "axis": "x"
+      },
+      "narrowRange": true
+    },
+    {
+      "kind": "link-dimension",
+      "part": "{id}-lip-back",
+      "axis": "x",
+      "source": {
+        "of": "part",
+        "part": "{id}-floor",
+        "axis": "x"
+      },
+      "narrowRange": true
+    },
+    {
+      "kind": "link-dimension",
+      "part": "{id}-lip-front",
+      "axis": "x",
+      "source": {
+        "of": "part",
+        "part": "{id}-floor",
+        "axis": "x"
+      },
+      "narrowRange": true
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-floor",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "top"
+        },
+        "body1": {
+          "part": "{id}-floor",
+          "face": "bottom"
+        },
+        "origin": {
+          "align": {
+            "z": "min"
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-lip-back",
+        "type": "fixed",
+        "body0": {
+          "part": "{id}-floor",
+          "face": "top"
+        },
+        "body1": {
+          "part": "{id}-lip-back",
+          "face": "bottom"
+        },
+        "origin": {
+          "align": {
+            "z": "min"
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-lip-front",
+        "type": "fixed",
+        "body0": {
+          "part": "{id}-floor",
+          "face": "top"
+        },
+        "body1": {
+          "part": "{id}-lip-front",
+          "face": "bottom"
+        },
+        "origin": {
+          "align": {
+            "z": "max"
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-floor",
+      "material": {
+        "token": "palette.tpl-9aa3ab"
+      },
+      "palette": {
+        "palette.tpl-9aa3ab": "#9aa3ab"
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-lip-back",
+      "material": {
+        "token": "palette.tpl-9aa3ab"
+      },
+      "palette": {
+        "palette.tpl-9aa3ab": "#9aa3ab"
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-lip-front",
+      "material": {
+        "token": "palette.tpl-9aa3ab"
+      },
+      "palette": {
+        "palette.tpl-9aa3ab": "#9aa3ab"
+      }
+    }
+  ]
+}

package/recipes/cable-tray/spec.json

@@ -0,0 +1,45 @@
+{
+  "name": "cable-tray",
+  "category": "control",
+  "tags": [
+    "cable",
+    "tray",
+    "electrical"
+  ],
+  "title": {
+    "ko": "케이블 트레이",
+    "en": "cable tray"
+  },
+  "description": {
+    "ko": "고른 부품 윗면의 뒤쪽 가장자리를 따라 케이블 트레이를 놓습니다.",
+    "en": "A cable tray along the back edge of the chosen part's top."
+  },
+  "params": [
+    {
+      "name": "width",
+      "kind": "mm",
+      "default": 300,
+      "label": {
+        "ko": "트레이 폭 (mm)",
+        "en": "tray width (mm)"
+      },
+      "hint": {
+        "ko": "트레이 바닥의 폭",
+        "en": "the width of the tray's floor"
+      },
+      "min": 100,
+      "max": 1000,
+      "bind": [
+        {
+          "step": {
+            "kind": "add-part",
+            "part": {
+              "id": "{id}-floor"
+            }
+          },
+          "path": "part.dimensions.depth"
+        }
+      ]
+    }
+  ]
+}

package/recipes/camera-mount/build.mts

@@ -0,0 +1,10 @@
+/* 카메라 거치대 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 1600, y: 1400, z: 1000 }, 'TPL_CAMERA_MOUNT'))
+  m.box('post', 40, 400, 40).on('post', 'bottom', 'host', 'top', { x: 'min', z: 'max' }).colour('post', 'leg', '#7d8790')
+    .box('camera', 180, 90, 90).on('camera', 'bottom', 'post', 'top').colour('camera', 'white', '#ffffff')
+    .moves('camera', { type: 'revolute', axis: 'Y', lower: -90, upper: 90, state: 'pan' })
+  return m.asset
+}

package/recipes/camera-mount/facts.md

@@ -0,0 +1,3 @@
+# camera-mount — facts (not shown on screen; the guide's basis and our review)
+
+윗면 x min · z max. 기둥 40×400×40, 카메라 180×90×90 기둥 위, 회전 Y −90~90 조작값 pan.

package/recipes/camera-mount/guide.en.md

@@ -0,0 +1,16 @@
+## When to use it
+
+To stand a surveillance camera on a machine's corner.
+
+## Putting it in
+
+1. Choose the part; the post stands at the **front left corner of its top**.
+2. Press "put in".
+
+## Afterwards
+
+- The **pan** control turns the camera from −90° to 90°.
+
+## Good to know
+
+- The post is 400 mm high.

package/recipes/camera-mount/guide.ko.md

@@ -0,0 +1,16 @@
+## 언제 쓰나
+
+설비 모서리에 감시 카메라를 세울 때 씁니다.
+
+## 넣는 순서
+
+1. 부품을 고릅니다. 기둥은 **윗면 왼쪽 앞** 모서리에 섭니다.
+2. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- **좌우** 조작값으로 카메라가 −90°~90° 돕니다.
+
+## 알아 둘 것
+
+- 기둥 높이는 400 mm입니다.

package/recipes/camera-mount/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_CAMERA_MOUNT","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"post.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"post.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"post.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"camera.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"camera.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"camera.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"pan","unit":"deg","min":-90,"max":90,"role":"state"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio._0_5","unit":"ratio","value":-0.5},{"id":"axis.ratio.0","unit":"ratio","value":0},{"id":"axis.ratio.1","unit":"ratio","value":1}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.size.x","host.size.y","host.size.z"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"post.shape","op":"box-shape@1","args":["post.dimension.width","post.dimension.height","post.dimension.depth"],"outputs":{"shape":"post.shapeValue"},"params":{"frame":"post.local"}},{"id":"post.pose","op":"rigid@1","args":["post.on.host.own-edge.x.0.times.value","post.on.host.along.y.1.sum.value","post.on.host.own-edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"post.poseValue"},"params":{"from":"post.local","to":"post.seat"}},{"id":"post","op":"place@1","args":["post.shapeValue","post.world.value"],"outputs":{"placed":"post.placed"}},{"id":"camera.shape","op":"box-shape@1","args":["camera.dimension.width","camera.dimension.height","camera.dimension.depth"],"outputs":{"shape":"camera.shapeValue"},"params":{"frame":"camera.local"}},{"id":"camera.pose","op":"rigid@1","args":["d.mm.0","camera.on.post.along.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"camera.poseValue"},"params":{"from":"camera.local","to":"camera.seat"}},{"id":"camera","op":"place@1","args":["camera.shapeValue","camera.world.value"],"outputs":{"placed":"camera.placed"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"post.on.host.seat.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"post.on.host.seat.y.0.times.value"}},{"id":"post.on.host.along.y.0.times","op":"mul@1","args":["post.dimension.height","k.ratio.0_5"],"outputs":{"value":"post.on.host.along.y.0.times.value"}},{"id":"post.on.host.along.y.1.sum","op":"add@1","args":["post.on.host.along.y.0.times.value","d.mm.0"],"outputs":{"value":"post.on.host.along.y.1.sum.value"}},{"id":"post.on.host.edge.x.0.times","op":"mul@1","args":["host.size.x","k.ratio._0_5"],"outputs":{"value":"post.on.host.edge.x.0.times.value"}},{"id":"post.on.host.own-edge.x.0.times","op":"mul@1","args":["post.dimension.width","k.ratio.0_5"],"outputs":{"value":"post.on.host.own-edge.x.0.times.value"}},{"id":"post.on.host.edge.z.0.times","op":"mul@1","args":["host.size.z","k.ratio.0_5"],"outputs":{"value":"post.on.host.edge.z.0.times.value"}},{"id":"post.on.host.own-edge.z.0.times","op":"mul@1","args":["post.dimension.depth","k.ratio._0_5"],"outputs":{"value":"post.on.host.own-edge.z.0.times.value"}},{"id":"post.seat.rigid","op":"rigid@1","args":["post.on.host.edge.x.0.times.value","post.on.host.seat.y.0.times.value","post.on.host.edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"post.seat.value"},"params":{"from":"post.seat","to":"host.local"}},{"id":"post.chain","op":"compose@1","args":["post.seat.value","post.poseValue"],"outputs":{"pose":"post.chain.value"}},{"id":"post.world","op":"compose@1","args":["host.chain.value","post.chain.value"],"outputs":{"pose":"post.world.value"}},{"id":"camera.on.post.seat.y.0.times","op":"mul@1","args":["post.dimension.height","k.ratio.0_5"],"outputs":{"value":"camera.on.post.seat.y.0.times.value"}},{"id":"camera.on.post.along.y.0.times","op":"mul@1","args":["camera.dimension.height","k.ratio.0_5"],"outputs":{"value":"camera.on.post.along.y.0.times.value"}},{"id":"camera.on.post.along.y.1.sum","op":"add@1","args":["camera.on.post.along.y.0.times.value","d.mm.0"],"outputs":{"value":"camera.on.post.along.y.1.sum.value"}},{"id":"camera.seat.rigid","op":"rigid@1","args":["d.mm.0","camera.on.post.seat.y.0.times.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"camera.seat.value"},"params":{"from":"camera.joint","to":"post.local"}},{"id":"camera.chain","op":"compose@1","args":["camera.seat.value","camera.turned.value"],"outputs":{"pose":"camera.chain.value"}},{"id":"camera.world","op":"compose@1","args":["post.world.value","camera.chain.value"],"outputs":{"pose":"camera.world.value"}},{"id":"camera.motion","op":"axis-turn@1","args":["axis.ratio.0","axis.ratio.1","axis.ratio.0","pan"],"outputs":{"pose":"camera.motion.value"},"params":{"from":"camera.seat","to":"camera.joint"}},{"id":"camera.turned","op":"compose@1","args":["camera.motion.value","camera.poseValue"],"outputs":{"pose":"camera.turned.value"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":1600,"host.size.y":1400,"host.size.z":1000,"post.dimension.width":40,"post.dimension.height":400,"post.dimension.depth":40,"camera.dimension.width":180,"camera.dimension.height":90,"camera.dimension.depth":90},"stateDefaults":{"pan":0},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-7d8790":"#7d8790","palette.tpl-ffffff":"#ffffff"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"post","material":{"token":"palette.tpl-7d8790"}},{"target":"camera","material":{"token":"palette.tpl-ffffff"}}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"post","type":"fixed","body0":{"part":"host","face":"top"},"body1":{"part":"post","face":"bottom"},"origin":{"align":{"x":"min","z":"max"}}},{"id":"camera","type":"revolute","body0":{"part":"post","face":"top"},"body1":{"part":"camera","face":"bottom"},"origin":{},"axis":"Y","lowerLimit":-90,"upperLimit":90,"state":{"id":"pan"}}]}

package/recipes/camera-mount/recipe.json

@@ -0,0 +1,108 @@
+{
+  "name": "camera-mount",
+  "title": {
+    "ko": "카메라 거치대",
+    "en": "camera mount"
+  },
+  "description": {
+    "ko": "고른 부품 윗면 모서리에 기둥과 좌우로 도는 카메라를 세웁니다.",
+    "en": "A post with a panning camera on a corner of the chosen part's top."
+  },
+  "category": "signal",
+  "tags": [
+    "camera",
+    "cctv",
+    "mount"
+  ],
+  "target": "part",
+  "params": [],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-post",
+        "kind": "box",
+        "dimensions": {
+          "width": 40,
+          "height": 400,
+          "depth": 40
+        }
+      }
+    },
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-camera",
+        "kind": "box",
+        "dimensions": {
+          "width": 180,
+          "height": 90,
+          "depth": 90
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-post",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "top"
+        },
+        "body1": {
+          "part": "{id}-post",
+          "face": "bottom"
+        },
+        "origin": {
+          "align": {
+            "x": "min",
+            "z": "max"
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-camera",
+        "type": "revolute",
+        "body0": {
+          "part": "{id}-post",
+          "face": "top"
+        },
+        "body1": {
+          "part": "{id}-camera",
+          "face": "bottom"
+        },
+        "origin": {},
+        "axis": "Y",
+        "lowerLimit": -90,
+        "upperLimit": 90,
+        "state": {
+          "id": "{id}-pan"
+        }
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-post",
+      "material": {
+        "token": "palette.tpl-7d8790"
+      },
+      "palette": {
+        "palette.tpl-7d8790": "#7d8790"
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-camera",
+      "material": {
+        "token": "palette.tpl-ffffff"
+      },
+      "palette": {
+        "palette.tpl-ffffff": "#ffffff"
+      }
+    }
+  ]
+}

package/recipes/camera-mount/spec.json

@@ -0,0 +1,18 @@
+{
+  "name": "camera-mount",
+  "category": "signal",
+  "tags": [
+    "camera",
+    "cctv",
+    "mount"
+  ],
+  "title": {
+    "ko": "카메라 거치대",
+    "en": "camera mount"
+  },
+  "description": {
+    "ko": "고른 부품 윗면 모서리에 기둥과 좌우로 도는 카메라를 세웁니다.",
+    "en": "A post with a panning camera on a corner of the chosen part's top."
+  },
+  "params": []
+}

package/recipes/canopy/build.mts

@@ -0,0 +1,17 @@
+/* 캐노피 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 6000, y: 50, z: 4000 }, 'TPL_CANOPY'))
+  const corners = [['post-1', 'min', 'min'], ['post-2', 'min', 'max'], ['post-3', 'max', 'min'], ['post-4', 'max', 'max']] as const
+  for (const [post, x, z] of corners)
+    m.box(post, 100, 2500, 100)
+      .on(post, 'bottom', 'host', 'top', { x, z })
+      .colour(post, 'palette.column', '#b8bfc6')
+  m.box('roof', 6000, 60, 4000)
+    .follow('roof', 'x', 'host', 'x')
+    .follow('roof', 'z', 'host', 'z')
+    .on('roof', 'bottom', 'host', 'top', undefined, 2500)
+    .colour('roof', 'palette.roof', '#6c7a89')
+  return m.asset
+}

package/recipes/canopy/facts.md

@@ -0,0 +1,3 @@
+# canopy — facts (not shown on screen; the guide's basis and our review)
+
+윗면 네 모서리 기둥 100×높이×100, 지붕 = 구역 X·Z × 60, 바닥에서 높이만큼 띄움.

package/recipes/canopy/guide.en.md

@@ -0,0 +1,18 @@
+## When to use it
+
+For a roof over an outdoor store or a loading bay.
+
+## Putting it in
+
+1. Choose the floor area; four posts stand at the corners of its **top** with the roof on them.
+2. Set the **height** in mm.
+3. Press "put in".
+
+## Afterwards
+
+- The roof follows the area; the posts keep to its corners.
+- The parts are ordinary parts: change them one by one, or take them all out with one undo.
+
+## Good to know
+
+- The roof is a flat plate.

package/recipes/canopy/guide.ko.md

@@ -0,0 +1,18 @@
+## 언제 쓰나
+
+야외 적치장이나 하역장 위에 지붕을 세울 때 씁니다.
+
+## 넣는 순서
+
+1. 바닥 구역을 고릅니다. 기둥 네 개가 **윗면 네 모서리**에, 지붕판이 그 위에 섭니다.
+2. **높이**를 mm로 정합니다.
+3. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- 지붕은 구역 크기를 따르고, 기둥은 늘 네 모서리에 있습니다.
+- 넣은 부품은 보통 부품이라 하나씩 고칠 수 있고, 되돌리기 한 번에 모두 빠집니다.
+
+## 알아 둘 것
+
+- 지붕은 평평한 판입니다.