@things-factory/figure-service 10.1.70 → 10.1.72

package/recipes/counter-display/guide.en.md

@@ -0,0 +1,17 @@
+## When to use it
+
+For a display of counts such as output or availability.
+
+## Putting it in
+
+1. Choose the part; the display goes high in the middle of its **front**.
+2. Press "put in".
+
+## Afterwards
+
+- Put the numbers on with the board's text or data.
+- The parts are ordinary parts: change them one by one, or take them all out with one undo.
+
+## Good to know
+
+- Its face is a red glowing plate.

package/recipes/counter-display/guide.ko.md

@@ -0,0 +1,17 @@
+## 언제 쓰나
+
+생산 수량, 가동률 같은 숫자를 보일 표시기를 달 때 씁니다.
+
+## 넣는 순서
+
+1. 부품을 고릅니다. 표시기는 **앞면 위쪽 가운데**에 붙습니다.
+2. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- 숫자는 보드의 글 부품이나 데이터 연결로 얹습니다.
+- 넣은 부품은 보통 부품이라 하나씩 고칠 수 있고, 되돌리기 한 번에 모두 빠집니다.
+
+## 알아 둘 것
+
+- 표시 면은 빨갛게 빛나는 판입니다.

package/recipes/counter-display/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_COUNTER_DISPLAY","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"display.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"display.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"display.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"digits.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"digits.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"digits.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio._0_5","unit":"ratio","value":-0.5}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.size.x","host.size.y","host.size.z"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"display.shape","op":"box-shape@1","args":["display.dimension.width","display.dimension.height","display.dimension.depth"],"outputs":{"shape":"display.shapeValue"},"params":{"frame":"display.local"}},{"id":"display.pose","op":"rigid@1","args":["d.mm.0","display.on.host.own-edge.y.0.times.value","display.on.host.along.z.1.sum.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"display.poseValue"},"params":{"from":"display.local","to":"display.seat"}},{"id":"display","op":"place@1","args":["display.shapeValue","display.world.value"],"outputs":{"placed":"display.placed"}},{"id":"digits.shape","op":"box-shape@1","args":["digits.dimension.width","digits.dimension.height","digits.dimension.depth"],"outputs":{"shape":"digits.shapeValue"},"params":{"frame":"digits.local"}},{"id":"digits.pose","op":"rigid@1","args":["d.mm.0","d.mm.0","digits.on.display.along.z.1.sum.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"digits.poseValue"},"params":{"from":"digits.local","to":"digits.seat"}},{"id":"digits","op":"place@1","args":["digits.shapeValue","digits.world.value"],"outputs":{"placed":"digits.placed"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"display.on.host.seat.z.0.times","op":"mul@1","args":["host.size.z","k.ratio.0_5"],"outputs":{"value":"display.on.host.seat.z.0.times.value"}},{"id":"display.on.host.along.z.0.times","op":"mul@1","args":["display.dimension.depth","k.ratio.0_5"],"outputs":{"value":"display.on.host.along.z.0.times.value"}},{"id":"display.on.host.along.z.1.sum","op":"add@1","args":["display.on.host.along.z.0.times.value","d.mm.0"],"outputs":{"value":"display.on.host.along.z.1.sum.value"}},{"id":"display.on.host.edge.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"display.on.host.edge.y.0.times.value"}},{"id":"display.on.host.own-edge.y.0.times","op":"mul@1","args":["display.dimension.height","k.ratio._0_5"],"outputs":{"value":"display.on.host.own-edge.y.0.times.value"}},{"id":"display.seat.rigid","op":"rigid@1","args":["d.mm.0","display.on.host.edge.y.0.times.value","display.on.host.seat.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"display.seat.value"},"params":{"from":"display.seat","to":"host.local"}},{"id":"display.chain","op":"compose@1","args":["display.seat.value","display.poseValue"],"outputs":{"pose":"display.chain.value"}},{"id":"display.world","op":"compose@1","args":["host.chain.value","display.chain.value"],"outputs":{"pose":"display.world.value"}},{"id":"digits.on.display.seat.z.0.times","op":"mul@1","args":["display.dimension.depth","k.ratio.0_5"],"outputs":{"value":"digits.on.display.seat.z.0.times.value"}},{"id":"digits.on.display.along.z.0.times","op":"mul@1","args":["digits.dimension.depth","k.ratio.0_5"],"outputs":{"value":"digits.on.display.along.z.0.times.value"}},{"id":"digits.on.display.along.z.1.sum","op":"add@1","args":["digits.on.display.along.z.0.times.value","d.mm.0"],"outputs":{"value":"digits.on.display.along.z.1.sum.value"}},{"id":"digits.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","digits.on.display.seat.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"digits.seat.value"},"params":{"from":"digits.seat","to":"display.local"}},{"id":"digits.chain","op":"compose@1","args":["digits.seat.value","digits.poseValue"],"outputs":{"pose":"digits.chain.value"}},{"id":"digits.world","op":"compose@1","args":["display.world.value","digits.chain.value"],"outputs":{"pose":"digits.world.value"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":1600,"host.size.y":1400,"host.size.z":1000,"display.dimension.width":600,"display.dimension.height":200,"display.dimension.depth":60,"digits.dimension.width":540,"digits.dimension.height":140,"digits.dimension.depth":5},"stateDefaults":{},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-1b1f23":"#1b1f23","palette.tpl-e74c3c":"#e74c3c"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"display","material":{"token":"palette.tpl-1b1f23"}},{"target":"digits","material":{"token":"palette.tpl-e74c3c","emissive":{"on":true,"token":"palette.tpl-e74c3c","intensity":1}}}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"display","type":"fixed","body0":{"part":"host","face":"front"},"body1":{"part":"display","face":"back"},"origin":{"align":{"y":"max"}}},{"id":"digits","type":"fixed","body0":{"part":"display","face":"front"},"body1":{"part":"digits","face":"back"},"origin":{}}]}

package/recipes/counter-display/recipe.json

@@ -0,0 +1,106 @@
+{
+  "name": "counter-display",
+  "title": {
+    "ko": "숫자 표시기",
+    "en": "counter display"
+  },
+  "description": {
+    "ko": "고른 부품 앞면 위쪽에 생산 수량 같은 숫자를 보일 표시기를 붙입니다.",
+    "en": "A display for counts such as output at the top of the chosen part's front."
+  },
+  "category": "signal",
+  "tags": [
+    "counter",
+    "display",
+    "andon"
+  ],
+  "target": "part",
+  "params": [],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-display",
+        "kind": "box",
+        "dimensions": {
+          "width": 600,
+          "height": 200,
+          "depth": 60
+        }
+      }
+    },
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-digits",
+        "kind": "box",
+        "dimensions": {
+          "width": 540,
+          "height": 140,
+          "depth": 5
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-display",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "front"
+        },
+        "body1": {
+          "part": "{id}-display",
+          "face": "back"
+        },
+        "origin": {
+          "align": {
+            "y": "max"
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-digits",
+        "type": "fixed",
+        "body0": {
+          "part": "{id}-display",
+          "face": "front"
+        },
+        "body1": {
+          "part": "{id}-digits",
+          "face": "back"
+        },
+        "origin": {}
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-display",
+      "material": {
+        "token": "palette.tpl-1b1f23"
+      },
+      "palette": {
+        "palette.tpl-1b1f23": "#1b1f23"
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-digits",
+      "material": {
+        "token": "palette.tpl-e74c3c",
+        "emissive": {
+          "on": true,
+          "token": "palette.tpl-e74c3c",
+          "intensity": 1
+        }
+      },
+      "palette": {
+        "palette.tpl-e74c3c": "#e74c3c"
+      }
+    }
+  ]
+}

package/recipes/counter-display/spec.json

@@ -0,0 +1,18 @@
+{
+  "name": "counter-display",
+  "category": "signal",
+  "tags": [
+    "counter",
+    "display",
+    "andon"
+  ],
+  "title": {
+    "ko": "숫자 표시기",
+    "en": "counter display"
+  },
+  "description": {
+    "ko": "고른 부품 앞면 위쪽에 생산 수량 같은 숫자를 보일 표시기를 붙입니다.",
+    "en": "A display for counts such as output at the top of the chosen part's front."
+  },
+  "params": []
+}

package/recipes/dock-bumpers/build.mts

@@ -0,0 +1,9 @@
+/* 도크 범퍼 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 3000, y: 1200, z: 400 }, 'TPL_DOCK_BUMPERS'))
+  for (const [b, x] of [['bumper-left', 'min'], ['bumper-right', 'max']] as const)
+    m.box(b, 250, 500, 120).on(b, 'back', 'host', 'front', { x, y: 'max' }).colour(b, 'wheel', '#2f3437')
+  return m.asset
+}

package/recipes/dock-bumpers/facts.md

@@ -0,0 +1,3 @@
+# dock-bumpers — facts (not shown on screen; the guide's basis and our review)
+
+앞면 y max, x min · max. 범퍼 250×500×120.

package/recipes/dock-bumpers/guide.en.md

@@ -0,0 +1,16 @@
+## When to use it
+
+To put rubber bumpers where trucks meet a dock wall.
+
+## Putting it in
+
+1. Choose the dock wall; the bumpers go at **both ends of the upper part of its front**.
+2. Press "put in".
+
+## Afterwards
+
+- Two bumpers stand at the wall's two ends and keep to them when the wall is resized.
+
+## Good to know
+
+- Each bumper is 250 × 500 × 120 mm.

package/recipes/dock-bumpers/guide.ko.md

@@ -0,0 +1,16 @@
+## 언제 쓰나
+
+하역장 벽에 트럭이 닿는 고무 범퍼를 둘 때 씁니다.
+
+## 넣는 순서
+
+1. 하역장 벽을 고릅니다. 범퍼는 **앞면 위쪽 양 끝**에 붙습니다.
+2. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- 범퍼 두 개가 벽 폭의 양 끝에 섭니다. 벽 폭을 바꾸면 끝을 따라 옮겨집니다.
+
+## 알아 둘 것
+
+- 범퍼는 250 × 500 × 120 mm입니다.

package/recipes/dock-bumpers/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_DOCK_BUMPERS","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"bumper-left.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"bumper-left.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"bumper-left.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"bumper-right.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"bumper-right.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"bumper-right.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio._0_5","unit":"ratio","value":-0.5}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.size.x","host.size.y","host.size.z"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"bumper-left.shape","op":"box-shape@1","args":["bumper-left.dimension.width","bumper-left.dimension.height","bumper-left.dimension.depth"],"outputs":{"shape":"bumper-left.shapeValue"},"params":{"frame":"bumper-left.local"}},{"id":"bumper-left.pose","op":"rigid@1","args":["bumper-left.on.host.own-edge.x.0.times.value","bumper-left.on.host.own-edge.y.0.times.value","bumper-left.on.host.along.z.1.sum.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"bumper-left.poseValue"},"params":{"from":"bumper-left.local","to":"bumper-left.seat"}},{"id":"bumper-left","op":"place@1","args":["bumper-left.shapeValue","bumper-left.world.value"],"outputs":{"placed":"bumper-left.placed"}},{"id":"bumper-right.shape","op":"box-shape@1","args":["bumper-right.dimension.width","bumper-right.dimension.height","bumper-right.dimension.depth"],"outputs":{"shape":"bumper-right.shapeValue"},"params":{"frame":"bumper-right.local"}},{"id":"bumper-right.pose","op":"rigid@1","args":["bumper-right.on.host.own-edge.x.0.times.value","bumper-right.on.host.own-edge.y.0.times.value","bumper-right.on.host.along.z.1.sum.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"bumper-right.poseValue"},"params":{"from":"bumper-right.local","to":"bumper-right.seat"}},{"id":"bumper-right","op":"place@1","args":["bumper-right.shapeValue","bumper-right.world.value"],"outputs":{"placed":"bumper-right.placed"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"bumper-left.on.host.seat.z.0.times","op":"mul@1","args":["host.size.z","k.ratio.0_5"],"outputs":{"value":"bumper-left.on.host.seat.z.0.times.value"}},{"id":"bumper-left.on.host.along.z.0.times","op":"mul@1","args":["bumper-left.dimension.depth","k.ratio.0_5"],"outputs":{"value":"bumper-left.on.host.along.z.0.times.value"}},{"id":"bumper-left.on.host.along.z.1.sum","op":"add@1","args":["bumper-left.on.host.along.z.0.times.value","d.mm.0"],"outputs":{"value":"bumper-left.on.host.along.z.1.sum.value"}},{"id":"bumper-left.on.host.edge.x.0.times","op":"mul@1","args":["host.size.x","k.ratio._0_5"],"outputs":{"value":"bumper-left.on.host.edge.x.0.times.value"}},{"id":"bumper-left.on.host.own-edge.x.0.times","op":"mul@1","args":["bumper-left.dimension.width","k.ratio.0_5"],"outputs":{"value":"bumper-left.on.host.own-edge.x.0.times.value"}},{"id":"bumper-left.on.host.edge.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"bumper-left.on.host.edge.y.0.times.value"}},{"id":"bumper-left.on.host.own-edge.y.0.times","op":"mul@1","args":["bumper-left.dimension.height","k.ratio._0_5"],"outputs":{"value":"bumper-left.on.host.own-edge.y.0.times.value"}},{"id":"bumper-left.seat.rigid","op":"rigid@1","args":["bumper-left.on.host.edge.x.0.times.value","bumper-left.on.host.edge.y.0.times.value","bumper-left.on.host.seat.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"bumper-left.seat.value"},"params":{"from":"bumper-left.seat","to":"host.local"}},{"id":"bumper-left.chain","op":"compose@1","args":["bumper-left.seat.value","bumper-left.poseValue"],"outputs":{"pose":"bumper-left.chain.value"}},{"id":"bumper-left.world","op":"compose@1","args":["host.chain.value","bumper-left.chain.value"],"outputs":{"pose":"bumper-left.world.value"}},{"id":"bumper-right.on.host.seat.z.0.times","op":"mul@1","args":["host.size.z","k.ratio.0_5"],"outputs":{"value":"bumper-right.on.host.seat.z.0.times.value"}},{"id":"bumper-right.on.host.along.z.0.times","op":"mul@1","args":["bumper-right.dimension.depth","k.ratio.0_5"],"outputs":{"value":"bumper-right.on.host.along.z.0.times.value"}},{"id":"bumper-right.on.host.along.z.1.sum","op":"add@1","args":["bumper-right.on.host.along.z.0.times.value","d.mm.0"],"outputs":{"value":"bumper-right.on.host.along.z.1.sum.value"}},{"id":"bumper-right.on.host.edge.x.0.times","op":"mul@1","args":["host.size.x","k.ratio.0_5"],"outputs":{"value":"bumper-right.on.host.edge.x.0.times.value"}},{"id":"bumper-right.on.host.own-edge.x.0.times","op":"mul@1","args":["bumper-right.dimension.width","k.ratio._0_5"],"outputs":{"value":"bumper-right.on.host.own-edge.x.0.times.value"}},{"id":"bumper-right.on.host.edge.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"bumper-right.on.host.edge.y.0.times.value"}},{"id":"bumper-right.on.host.own-edge.y.0.times","op":"mul@1","args":["bumper-right.dimension.height","k.ratio._0_5"],"outputs":{"value":"bumper-right.on.host.own-edge.y.0.times.value"}},{"id":"bumper-right.seat.rigid","op":"rigid@1","args":["bumper-right.on.host.edge.x.0.times.value","bumper-right.on.host.edge.y.0.times.value","bumper-right.on.host.seat.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"bumper-right.seat.value"},"params":{"from":"bumper-right.seat","to":"host.local"}},{"id":"bumper-right.chain","op":"compose@1","args":["bumper-right.seat.value","bumper-right.poseValue"],"outputs":{"pose":"bumper-right.chain.value"}},{"id":"bumper-right.world","op":"compose@1","args":["host.chain.value","bumper-right.chain.value"],"outputs":{"pose":"bumper-right.world.value"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":3000,"host.size.y":1200,"host.size.z":400,"bumper-left.dimension.width":250,"bumper-left.dimension.height":500,"bumper-left.dimension.depth":120,"bumper-right.dimension.width":250,"bumper-right.dimension.height":500,"bumper-right.dimension.depth":120},"stateDefaults":{},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-2f3437":"#2f3437"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"bumper-left","material":{"token":"palette.tpl-2f3437"}},{"target":"bumper-right","material":{"token":"palette.tpl-2f3437"}}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"bumper-left","type":"fixed","body0":{"part":"host","face":"front"},"body1":{"part":"bumper-left","face":"back"},"origin":{"align":{"x":"min","y":"max"}}},{"id":"bumper-right","type":"fixed","body0":{"part":"host","face":"front"},"body1":{"part":"bumper-right","face":"back"},"origin":{"align":{"x":"max","y":"max"}}}]}

package/recipes/dock-bumpers/recipe.json

@@ -0,0 +1,107 @@
+{
+  "name": "dock-bumpers",
+  "title": {
+    "ko": "도크 범퍼",
+    "en": "dock bumpers"
+  },
+  "description": {
+    "ko": "고른 부품(하역장 벽) 앞면 위쪽 양쪽에 고무 범퍼 두 개를 붙입니다.",
+    "en": "Two rubber bumpers high on both sides of the chosen part's front (a dock wall)."
+  },
+  "category": "handling",
+  "tags": [
+    "dock",
+    "bumper",
+    "loading"
+  ],
+  "target": "part",
+  "params": [],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-bumper-left",
+        "kind": "box",
+        "dimensions": {
+          "width": 250,
+          "height": 500,
+          "depth": 120
+        }
+      }
+    },
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-bumper-right",
+        "kind": "box",
+        "dimensions": {
+          "width": 250,
+          "height": 500,
+          "depth": 120
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-bumper-left",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "front"
+        },
+        "body1": {
+          "part": "{id}-bumper-left",
+          "face": "back"
+        },
+        "origin": {
+          "align": {
+            "x": "min",
+            "y": "max"
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-bumper-right",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "front"
+        },
+        "body1": {
+          "part": "{id}-bumper-right",
+          "face": "back"
+        },
+        "origin": {
+          "align": {
+            "x": "max",
+            "y": "max"
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-bumper-left",
+      "material": {
+        "token": "palette.tpl-2f3437"
+      },
+      "palette": {
+        "palette.tpl-2f3437": "#2f3437"
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-bumper-right",
+      "material": {
+        "token": "palette.tpl-2f3437"
+      },
+      "palette": {
+        "palette.tpl-2f3437": "#2f3437"
+      }
+    }
+  ]
+}

package/recipes/dock-bumpers/spec.json

@@ -0,0 +1,18 @@
+{
+  "name": "dock-bumpers",
+  "category": "handling",
+  "tags": [
+    "dock",
+    "bumper",
+    "loading"
+  ],
+  "title": {
+    "ko": "도크 범퍼",
+    "en": "dock bumpers"
+  },
+  "description": {
+    "ko": "고른 부품(하역장 벽) 앞면 위쪽 양쪽에 고무 범퍼 두 개를 붙입니다.",
+    "en": "Two rubber bumpers high on both sides of the chosen part's front (a dock wall)."
+  },
+  "params": []
+}

package/recipes/dock-leveler/build.mts

@@ -0,0 +1,11 @@
+/* 도크 레벨러 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 2400, y: 1200, z: 3000 }, 'TPL_DOCK_LEVELER'))
+  m.box('plate', 2000, 30, 2500)
+    .on('plate', 'bottom', 'host', 'top', { z: 'max' })
+    .colour('plate', 'leveler', '#5d6d7e')
+    .moves('plate', { type: 'revolute', axis: 'X', lower: -10, upper: 10, state: 'tilt' })
+  return m.asset
+}

package/recipes/dock-leveler/facts.md

@@ -0,0 +1,3 @@
+# dock-leveler — facts (not shown on screen; the guide's basis and our review)
+
+윗면 z max. 판 2000×30×2500. 회전 X −10~10, 조작값 tilt.

package/recipes/dock-leveler/guide.en.md

@@ -0,0 +1,16 @@
+## When to use it
+
+To show a dock leveler bridging the dock floor and a truck bed.
+
+## Putting it in
+
+1. Choose the dock floor; the leveler lies at the **front edge of its top**.
+2. Press "put in".
+
+## Afterwards
+
+- The **tilt** control tips the plate from −10° to 10°. Use it with a dock door template.
+
+## Good to know
+
+- The plate is 2000 × 2500 mm.

package/recipes/dock-leveler/guide.ko.md

@@ -0,0 +1,16 @@
+## 언제 쓰나
+
+하역장에서 트럭 짐칸과 바닥을 잇는 레벨러를 보일 때 씁니다.
+
+## 넣는 순서
+
+1. 하역장 바닥을 고릅니다. 레벨러는 **윗면 앞쪽 가장자리**에 놓입니다.
+2. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- **기울임** 조작값으로 판이 −10°~10° 기웁니다. 도크 문 템플릿과 함께 씁니다.
+
+## 알아 둘 것
+
+- 판은 2000 × 2500 mm입니다.

package/recipes/dock-leveler/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_DOCK_LEVELER","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"plate.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"plate.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"plate.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"tilt","unit":"deg","min":-10,"max":10,"role":"state"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio._0_5","unit":"ratio","value":-0.5},{"id":"axis.ratio.1","unit":"ratio","value":1},{"id":"axis.ratio.0","unit":"ratio","value":0}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.size.x","host.size.y","host.size.z"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"plate.shape","op":"box-shape@1","args":["plate.dimension.width","plate.dimension.height","plate.dimension.depth"],"outputs":{"shape":"plate.shapeValue"},"params":{"frame":"plate.local"}},{"id":"plate.pose","op":"rigid@1","args":["d.mm.0","plate.on.host.along.y.1.sum.value","plate.on.host.own-edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"plate.poseValue"},"params":{"from":"plate.local","to":"plate.seat"}},{"id":"plate","op":"place@1","args":["plate.shapeValue","plate.world.value"],"outputs":{"placed":"plate.placed"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"plate.on.host.seat.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"plate.on.host.seat.y.0.times.value"}},{"id":"plate.on.host.along.y.0.times","op":"mul@1","args":["plate.dimension.height","k.ratio.0_5"],"outputs":{"value":"plate.on.host.along.y.0.times.value"}},{"id":"plate.on.host.along.y.1.sum","op":"add@1","args":["plate.on.host.along.y.0.times.value","d.mm.0"],"outputs":{"value":"plate.on.host.along.y.1.sum.value"}},{"id":"plate.on.host.edge.z.0.times","op":"mul@1","args":["host.size.z","k.ratio.0_5"],"outputs":{"value":"plate.on.host.edge.z.0.times.value"}},{"id":"plate.on.host.own-edge.z.0.times","op":"mul@1","args":["plate.dimension.depth","k.ratio._0_5"],"outputs":{"value":"plate.on.host.own-edge.z.0.times.value"}},{"id":"plate.seat.rigid","op":"rigid@1","args":["d.mm.0","plate.on.host.seat.y.0.times.value","plate.on.host.edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"plate.seat.value"},"params":{"from":"plate.joint","to":"host.local"}},{"id":"plate.chain","op":"compose@1","args":["plate.seat.value","plate.turned.value"],"outputs":{"pose":"plate.chain.value"}},{"id":"plate.world","op":"compose@1","args":["host.chain.value","plate.chain.value"],"outputs":{"pose":"plate.world.value"}},{"id":"plate.motion","op":"axis-turn@1","args":["axis.ratio.1","axis.ratio.0","axis.ratio.0","tilt"],"outputs":{"pose":"plate.motion.value"},"params":{"from":"plate.seat","to":"plate.joint"}},{"id":"plate.turned","op":"compose@1","args":["plate.motion.value","plate.poseValue"],"outputs":{"pose":"plate.turned.value"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":2400,"host.size.y":1200,"host.size.z":3000,"plate.dimension.width":2000,"plate.dimension.height":30,"plate.dimension.depth":2500},"stateDefaults":{"tilt":0},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-5d6d7e":"#5d6d7e"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"plate","material":{"token":"palette.tpl-5d6d7e"}}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"plate","type":"revolute","body0":{"part":"host","face":"top"},"body1":{"part":"plate","face":"bottom"},"origin":{"align":{"z":"max"}},"axis":"X","lowerLimit":-10,"upperLimit":10,"state":{"id":"tilt"}}]}

package/recipes/dock-leveler/recipe.json

@@ -0,0 +1,69 @@
+{
+  "name": "dock-leveler",
+  "title": {
+    "ko": "도크 레벨러",
+    "en": "dock leveler"
+  },
+  "description": {
+    "ko": "고른 부품(하역장 바닥) 윗면의 앞쪽 가장자리에 들리는 레벨러 판을 넣습니다.",
+    "en": "A lifting leveler plate at the front edge of the chosen part's top (a dock floor)."
+  },
+  "category": "handling",
+  "tags": [
+    "dock",
+    "leveler",
+    "loading"
+  ],
+  "target": "part",
+  "params": [],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-plate",
+        "kind": "box",
+        "dimensions": {
+          "width": 2000,
+          "height": 30,
+          "depth": 2500
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-plate",
+        "type": "revolute",
+        "body0": {
+          "part": "{target}",
+          "face": "top"
+        },
+        "body1": {
+          "part": "{id}-plate",
+          "face": "bottom"
+        },
+        "origin": {
+          "align": {
+            "z": "max"
+          }
+        },
+        "axis": "X",
+        "lowerLimit": -10,
+        "upperLimit": 10,
+        "state": {
+          "id": "{id}-tilt"
+        }
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-plate",
+      "material": {
+        "token": "palette.tpl-5d6d7e"
+      },
+      "palette": {
+        "palette.tpl-5d6d7e": "#5d6d7e"
+      }
+    }
+  ]
+}

package/recipes/dock-leveler/spec.json

@@ -0,0 +1,18 @@
+{
+  "name": "dock-leveler",
+  "category": "handling",
+  "tags": [
+    "dock",
+    "leveler",
+    "loading"
+  ],
+  "title": {
+    "ko": "도크 레벨러",
+    "en": "dock leveler"
+  },
+  "description": {
+    "ko": "고른 부품(하역장 바닥) 윗면의 앞쪽 가장자리에 들리는 레벨러 판을 넣습니다.",
+    "en": "A lifting leveler plate at the front edge of the chosen part's top (a dock floor)."
+  },
+  "params": []
+}

package/recipes/double-hinged-door/build.mts

@@ -0,0 +1,19 @@
+/* 양여닫이 문 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 4000, y: 3000, z: 6000 }, 'TPL_DOUBLE_HINGED_DOOR'))
+  m.add({ id: 'frame', kind: 'portal', dimensions: { width: 1400, height: 2400, depth: 150, jamb: 100, head: 100 } } as never)
+    .on('frame', 'back', 'host', 'front', { y: 'min' })
+    .follow('frame', 'x', 'host', 'x', 0.35)
+    .follow('frame', 'y', 'host', 'y', 0.8)
+  for (const [leaf, side] of [['left', 'left'], ['right', 'right']] as const)
+    m.box(leaf, 595, 2290, 40)
+      .follow(leaf, 'x', 'frame', 'x', 0.5, -105)
+      .follow(leaf, 'y', 'frame', 'y', 1, -110)
+      .on(leaf, side, 'frame', `opening-${side}`, { y: 'min', z: 'max' }, 5)
+      .colour(leaf, 'palette.leaf', '#5c7c96')
+  m.moves('left', { type: 'revolute', axis: 'Y', lower: -90, upper: 0, state: 'open' })
+    .moves('right', { type: 'revolute', axis: 'Y', mimic: { joint: 'left', multiplier: -1 } })
+  return m.asset
+}

package/recipes/double-hinged-door/facts.md

@@ -0,0 +1,3 @@
+# double-hinged-door — facts (not shown on screen; the guide's basis and our review)
+
+앞면에 붙음. 문틀 폭·높이 = 부품 × 비율, 기둥·윗틀 100 mm. 문짝 = (문틀 폭 ÷ 2 − 105) × (문틀 높이 − 110). 왼쪽 문짝 회전 −90~0°, 오른쪽은 반대로 따라감(mimic −1). 한계: 바깥 열림만.

package/recipes/double-hinged-door/guide.en.md

@@ -0,0 +1,19 @@
+## When to use it
+
+For a wide entrance with doors that swing apart -- a store, a plant room, a loading entrance.
+
+## Putting it in
+
+1. Choose the part the door goes on; it is fastened to the part's **front**.
+2. Set the **frame width** and **frame height** as a % of the part.
+3. Press "put in".
+
+## Afterwards
+
+- Move the **open** control in the motion tab: both leaves swing outward together, up to 90°.
+- The two leaves fill half the opening each, 5 mm clear at the middle and the hinges.
+- The parts are ordinary parts: change them one by one, or take them all out with one undo.
+
+## Good to know
+
+- They open outward only.

package/recipes/double-hinged-door/guide.ko.md

@@ -0,0 +1,19 @@
+## 언제 쓰나
+
+넓은 출입구에 양쪽으로 여는 문을 달 때 씁니다. 창고, 설비실, 반입구에 맞습니다.
+
+## 넣는 순서
+
+1. 문을 달 부품을 고릅니다. 문은 그 부품의 **앞면**에 붙습니다.
+2. **문틀 폭**과 **문틀 높이**를 부품에 대한 %로 정합니다.
+3. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- 움직임 칸의 **열림** 조작값을 움직이면 두 문짝이 함께 바깥으로 90°까지 열립니다.
+- 두 문짝은 문틀 빈 곳을 반씩 채우고, 가운데와 경첩 쪽에 5 mm씩 틈이 있습니다.
+- 넣은 부품은 보통 부품이라 하나씩 고칠 수 있고, 되돌리기 한 번에 모두 빠집니다.
+
+## 알아 둘 것
+
+- 바깥쪽으로만 열립니다.