@antv/l7-layers 2.20.5 → 2.20.8

package/lib/line/shaders/dash/arc_dash_vert.glsl

@@ -1,102 +0,0 @@
-
-attribute vec4 a_Color;
-attribute vec3 a_Position;
-attribute vec4 a_Instance;
-attribute float a_Size;
-uniform mat4 u_ModelMatrix;
-
-uniform float segmentNumber;
-varying vec4 v_color;
-
-
-uniform vec4 u_dash_array: [10.0, 5., 0, 0];
-uniform float u_lineDir: 1.0;
-varying vec4 v_dash_array;
-varying float v_distance_ratio;
-#pragma include "projection"
-#pragma include "project"
-#pragma include "picking"
-
-float bezier3(vec3 arr, float t) {
-  float ut = 1. - t;
-  return (arr.x * ut + arr.y * t) * ut + (arr.y * ut + arr.z * t) * t;
-}
-vec2 midPoint(vec2 source, vec2 target, float arcThetaOffset) {
-  vec2 center = target - source;
-  float r = length(center);
-  float theta = atan(center.y, center.x);
-  float thetaOffset = arcThetaOffset;
-  float r2 = r / 2.0 / cos(thetaOffset);
-  float theta2 = theta + thetaOffset;
-  vec2 mid = vec2(r2*cos(theta2) + source.x, r2*sin(theta2) + source.y);
-  if(u_lineDir == 1.0) { // 正向
-    return mid;
-  } else { // 逆向
-    // (mid + vmin)/2 = (s + t)/2
-    vec2 vmid = source + target - mid;
-    return vmid;
-  }
-  // return mid;
-}
-float getSegmentRatio(float index) {
-  // dash: index / (segmentNumber - 1.);
-  // normal: smoothstep(0.0, 1.0, index / (segmentNumber - 1.));
-  return index / (segmentNumber - 1.);
-}
-vec2 interpolate (vec2 source, vec2 target, float t, float arcThetaOffset) {
-  // if the angularDist is PI, linear interpolation is applied. otherwise, use spherical interpolation
-  vec2 mid = midPoint(source, target, arcThetaOffset);
-  vec3 x = vec3(source.x, mid.x, target.x);
-  vec3 y = vec3(source.y, mid.y, target.y);
-  return vec2(bezier3(x ,t), bezier3(y,t));
-}
-vec2 getExtrusionOffset(vec2 line_clipspace, float offset_direction) {
-  // normalized direction of the line
-  vec2 dir_screenspace = normalize(line_clipspace);
-  // rotate by 90 degrees
-   dir_screenspace = vec2(-dir_screenspace.y, dir_screenspace.x);
-  vec2 offset = dir_screenspace * offset_direction * setPickingSize(a_Size) / 2.0;
-  return offset;
-}
-vec2 getNormal(vec2 line_clipspace, float offset_direction) {
-  // normalized direction of the line
-  vec2 dir_screenspace = normalize(line_clipspace);
-  // rotate by 90 degrees
-   dir_screenspace = vec2(-dir_screenspace.y, dir_screenspace.x);
-   return reverse_offset_normal(vec3(dir_screenspace,1.0)).xy * sign(offset_direction);
-}
-
-void main() {
-  v_color = vec4(a_Color.xyz, a_Color.w * opacity);
-  
-  vec2 source = a_Instance.rg;  // 起始点
-  vec2 target =  a_Instance.ba; // 终点
-  float segmentIndex = a_Position.x;
-  float segmentRatio = getSegmentRatio(segmentIndex);
-
-  float indexDir = mix(-1.0, 1.0, step(segmentIndex, 0.0));
-  float nextSegmentRatio = getSegmentRatio(segmentIndex + indexDir);
-
-  vec2 s = source;
-  vec2 t = target;
-  
-  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
-    s = unProjCustomCoord(source);
-    t = unProjCustomCoord(target);
-  }
-  float total_Distance = pixelDistance(s, t) / 2.0 * PI;
-  v_dash_array = pow(2.0, 20.0 - u_Zoom) * u_dash_array / total_Distance;
-
-  v_distance_ratio = segmentIndex / segmentNumber;
-
-  vec4 curr = project_position(vec4(interpolate(source, target, segmentRatio, thetaOffset), 0.0, 1.0));
-  vec4 next = project_position(vec4(interpolate(source, target, nextSegmentRatio, thetaOffset), 0.0, 1.0));
- 
-  
-  vec2 offset = project_pixel(getExtrusionOffset((next.xy - curr.xy) * indexDir, a_Position.y));
-
-  gl_Position = project_common_position_to_clipspace_v2(vec4(curr.xy + offset, 0, 1.0));
-
-  gl_PointSize = 5.0;
-  setPickingColor(a_PickingColor);
-}

package/lib/line/shaders/dash/line_dash_frag.glsl

@@ -1,27 +0,0 @@
-#define LineTypeSolid 0.0
-varying vec4 v_color;
-
-// dash
-varying vec4 v_dash_array;
-varying float v_d_distance_ratio;
-
-#pragma include "picking"
-
-uniform float u_time;
-uniform vec4 u_animate: [ 1., 2., 1.0, 0.2 ]; // 控制运动
-
-// [animate, duration, interval, trailLength],
-void main() {
-
-  gl_FragColor = v_color;
-
-  float dashLength = mod(v_d_distance_ratio, v_dash_array.x + v_dash_array.y + v_dash_array.z + v_dash_array.w);
-  if(dashLength < v_dash_array.x || (dashLength > (v_dash_array.x + v_dash_array.y) && dashLength <  v_dash_array.x + v_dash_array.y + v_dash_array.z)) {
-    // 实线部分
-  } else {
-    // 虚线部分
-    discard;
-  };
-
-  gl_FragColor = filterColor(gl_FragColor);
-}

package/lib/line/shaders/dash/line_dash_vert.glsl

@@ -1,82 +0,0 @@
-#define LineTypeSolid 0.0
-#define LineTypeDash 1.0
-#define Animate 0.0
-
-attribute float a_Miter;
-attribute vec4 a_Color;
-attribute vec2 a_Size;
-attribute vec3 a_Normal;
-attribute vec3 a_Position;
-
-attribute vec2 a_iconMapUV;
-
-// dash line
-attribute float a_Total_Distance;
-attribute vec2 a_DistanceAndIndex;
-uniform float u_raisingHeight: 0.0;
-uniform float u_heightfixed: 0.0;
-
-uniform mat4 u_ModelMatrix;
-
-uniform vec4 u_dash_array: [10.0, 5., 0, 0];
-
-uniform float u_vertexScale: 1.0;
-
-#pragma include "projection"
-#pragma include "picking"
-
-varying vec4 v_color;
-varying vec4 v_dash_array;
-varying float v_d_distance_ratio;
-
-
-void main() {
-
-  v_dash_array = pow(2.0, 20.0 - u_Zoom) * u_dash_array / a_Total_Distance;
-  v_color = vec4(a_Color.xyz, a_Color.w * opacity);
-
-  vec3 size = a_Miter * setPickingSize(a_Size.x) * reverse_offset_normal(a_Normal);
-  vec2 offset = project_pixel(size.xy);
-  v_d_distance_ratio = a_DistanceAndIndex.x / a_Total_Distance;
-
-
-  vec4 project_pos = project_position(vec4(a_Position.xy, 0, 1.0));
-  
- float h = float(a_Position.z) * u_vertexScale; // 线顶点的高度 - 兼容不存在第三个数值的情况 vertex height
-  float lineHeight = a_Size.y; // size 第二个参数代表的高度 [linewidth, lineheight]
-
-  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
-    lineHeight *= 0.2; // 保持和 amap/mapbox 一致的效果
-    h *= 0.2;
-    if(u_heightfixed < 1.0) {
-      lineHeight = project_pixel(a_Size.y);
-    }
-    gl_Position = u_Mvp * (vec4(project_pos.xy + offset, lineHeight + h + u_raisingHeight, 1.0));
-  } else {
-    // mapbox -  amap
-    
-    // 兼容 mapbox 在线高度上的效果表现基本一致
-    if(u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT || u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT_OFFSET) {
-      // mapbox
-      // 保持高度相对不变
-      float mapboxZoomScale = 4.0/pow(2.0, 21.0 - u_Zoom);
-      h *= mapboxZoomScale;
-      h += u_raisingHeight * mapboxZoomScale;
-      if(u_heightfixed > 0.0) {
-        lineHeight *= mapboxZoomScale;
-      }
-      
-    } else {
-      // amap
-      h += u_raisingHeight;
-      // lineHeight 顶点偏移高度
-      if(u_heightfixed < 1.0) {
-        lineHeight *= pow(2.0, 20.0 - u_Zoom);
-      }
-    }
-
-    gl_Position = project_common_position_to_clipspace(vec4(project_pos.xy + offset, lineHeight + h, 1.0));
-  }
-
-  setPickingColor(a_PickingColor);
-}

package/lib/line/shaders/line_arc2d_vert.glsl

@@ -1,114 +0,0 @@
-#define LineTypeSolid 0.0
-#define LineTypeDash 1.0
-#define Animate 0.0
-attribute vec4 a_Color;
-attribute vec3 a_Position;
-attribute vec4 a_Instance;
-attribute float a_Size;
-uniform mat4 u_ModelMatrix;
-uniform float segmentNumber;
-uniform vec4 u_animate: [ 1., 2., 1.0, 0.2 ];
-varying vec4 v_color;
-varying vec2 v_normal;
-
-varying float v_distance_ratio;
-uniform float u_line_type: 0.0;
-uniform vec4 u_dash_array: [10.0, 5., 0, 0];
-varying vec4 v_dash_array;
-
-#pragma include "projection"
-#pragma include "project"
-#pragma include "picking"
-
-float maps (float value, float start1, float stop1, float start2, float stop2) {
-    return start2 + (stop2 - start2) * ((value - start1) / (stop1 - start1));
-}
-
-float getSegmentRatio(float index) {
-    return smoothstep(0.0, 1.0, index / (segmentNumber - 1.));
-}
-
-float paraboloid(vec2 source, vec2 target, float ratio) {
-    vec2 x = mix(source, target, ratio);
-    vec2 center = mix(source, target, 0.5);
-    float dSourceCenter = distance(source, center);
-    float dXCenter = distance(x, center);
-    return (dSourceCenter + dXCenter) * (dSourceCenter - dXCenter);
-}
-
-vec3 getPos(vec2 source, vec2 target, float segmentRatio) {
-     float vertex_height = paraboloid(source, target, segmentRatio);
-
-    return vec3(
-    mix(source, target, segmentRatio),
-    sqrt(max(0.0, vertex_height))
-    );
-}
-vec2 getExtrusionOffset(vec2 line_clipspace, float offset_direction) {
-  // normalized direction of the line
-  vec2 dir_screenspace = normalize(line_clipspace);
-  // rotate by 90 degrees
-   dir_screenspace = vec2(-dir_screenspace.y, dir_screenspace.x);
-  vec2 offset = dir_screenspace * offset_direction * setPickingSize(a_Size) / 2.0;
-  return offset * vec2(1.0, -1.0);
-}
-vec2 getNormal(vec2 line_clipspace, float offset_direction) {
-  // normalized direction of the line
-  vec2 dir_screenspace = normalize(line_clipspace);
-  // rotate by 90 degrees
-   dir_screenspace = vec2(-dir_screenspace.y, dir_screenspace.x);
-   return reverse_offset_normal(vec3(dir_screenspace,1.0)).xy * sign(offset_direction);
-}
-float getAngularDist (vec2 source, vec2 target) {
-  vec2 delta = source - target;
-  vec2 sin_half_delta = sin(delta / 2.0);
-  float a =
-    sin_half_delta.y * sin_half_delta.y +
-    cos(source.y) * cos(target.y) *
-    sin_half_delta.x * sin_half_delta.x;
-  return 2.0 * atan(sqrt(a), sqrt(1.0 - a));
-}
-vec2 interpolate (vec2 source, vec2 target, float angularDist, float t) {
-  // if the angularDist is PI, linear interpolation is applied. otherwise, use spherical interpolation
-  if(abs(angularDist - PI) < 0.001) {
-    return (1.0 - t) * source + t * target;
-  }
-  float a = sin((1.0 - t) * angularDist) / sin(angularDist);
-  float b = sin(t * angularDist) / sin(angularDist);
-  vec2 sin_source = sin(source);
-  vec2 cos_source = cos(source);
-  vec2 sin_target = sin(target);
-  vec2 cos_target = cos(target);
-  float x = a * cos_source.y * cos_source.x + b * cos_target.y * cos_target.x;
-  float y = a * cos_source.y * sin_source.x + b * cos_target.y * sin_target.x;
-  float z = a * sin_source.y + b * sin_target.y;
-  return vec2(atan(y, x), atan(z, sqrt(x * x + y * y)));
-}
-
-void main() {
-  v_color = a_Color;
-  vec2 source = radians(a_Instance.rg);
-  vec2 target = radians(a_Instance.ba);
-  float angularDist = getAngularDist(source, target);
-  float segmentIndex = a_Position.x;
-  float segmentRatio = getSegmentRatio(segmentIndex);
-  float indexDir = mix(-1.0, 1.0, step(segmentIndex, 0.0));
-  if(u_line_type == LineTypeDash) {
-    v_distance_ratio = segmentIndex / segmentNumber;
-    float total_Distance = pixelDistance(a_Instance.rg, a_Instance.ba);
-    v_dash_array = pow(2.0, 20.0 - u_Zoom) * u_dash_array / (total_Distance / segmentNumber * segmentIndex);
-  }
-  if(u_animate.x == Animate) {
-      v_distance_ratio = segmentIndex / segmentNumber;
-  }
-  float nextSegmentRatio = getSegmentRatio(segmentIndex + indexDir);
-  v_distance_ratio = segmentIndex / segmentNumber;
-  vec4 curr = project_position(vec4(degrees(interpolate(source, target, angularDist, segmentRatio)), 0.0, 1.0));
-  vec4 next = project_position(vec4(degrees(interpolate(source, target, angularDist, nextSegmentRatio)), 0.0, 1.0));
-  v_normal = getNormal((next.xy - curr.xy) * indexDir, a_Position.y);
-  vec2 offset = project_pixel(getExtrusionOffset((next.xy - curr.xy) * indexDir, a_Position.y));
-  //  vec4 project_pos = project_position(vec4(curr.xy, 0, 1.0));
-  gl_Position = project_common_position_to_clipspace_v2(vec4(curr.xy + offset, curr.z, 1.0));
-  setPickingColor(a_PickingColor);
-}
-

package/lib/line/shaders/line_bezier_vert.glsl

@@ -1,85 +0,0 @@
-#define LineTypeSolid 0.0
-#define LineTypeDash 1.0
-#define Animate 0.0
-attribute vec4 a_Color;
-attribute vec3 a_Position;
-attribute vec4 a_Instance;
-attribute float a_Size;
-uniform mat4 u_ModelMatrix;
-uniform float segmentNumber;
-uniform vec4 u_animate: [ 1., 2., 1.0, 0.2 ];
-varying vec4 v_color;
-varying vec2 v_normal;
-
-varying float v_distance_ratio;
-uniform float u_line_type: 0.0;
-uniform vec4 u_dash_array: [10.0, 5., 0, 0];
-varying vec4 v_dash_array;
-#pragma include "projection"
-#pragma include "project"
-#pragma include "picking"
-
-float bezier3(vec3 arr, float t) {
-  float ut = 1. - t;
-  return (arr.x * ut + arr.y * t) * ut + (arr.y * ut + arr.z * t) * t;
-}
-vec2 midPoint(vec2 source, vec2 target) {
-  vec2 center = target - source;
-  float r = length(center);
-  float theta = atan(center.y, center.x);
-  float thetaOffset = 0.314;
-  float r2 = r / 2.0 / cos(thetaOffset);
-  float theta2 = theta + thetaOffset;
-  vec2 mid = vec2(r2*cos(theta2) + source.x, r2*sin(theta2) + source.y);
-  return mid;
-}
-float getSegmentRatio(float index) {
-    return smoothstep(0.0, 1.0, index / (segmentNumber - 1.));
-}
-vec2 interpolate (vec2 source, vec2 target, float t) {
-  // if the angularDist is PI, linear interpolation is applied. otherwise, use spherical interpolation
-  vec2 mid = midPoint(source, target);
-  vec3 x = vec3(source.x, mid.x, target.x);
-  vec3 y = vec3(source.y, mid.y, target.y);
-  return vec2(bezier3(x ,t), bezier3(y,t));
-}
-vec2 getExtrusionOffset(vec2 line_clipspace, float offset_direction) {
-  // normalized direction of the line
-  vec2 dir_screenspace = normalize(line_clipspace);
-  // rotate by 90 degrees
-   dir_screenspace = vec2(-dir_screenspace.y, dir_screenspace.x);
-  vec2 offset = dir_screenspace * offset_direction * setPickingSize(a_Size) / 2.0;
-  return offset * vec2(1.0, -1.0);
-}
-vec2 getNormal(vec2 line_clipspace, float offset_direction) {
-  // normalized direction of the line
-  vec2 dir_screenspace = normalize(line_clipspace);
-  // rotate by 90 degrees
-   dir_screenspace = vec2(-dir_screenspace.y, dir_screenspace.x);
-   return reverse_offset_normal(vec3(dir_screenspace,1.0)).xy * sign(offset_direction);
-}
-
-void main() {
-  v_color = a_Color;
-  vec2 source = a_Instance.rg;
-  vec2 target =  a_Instance.ba;
-  float segmentIndex = a_Position.x;
-  float segmentRatio = getSegmentRatio(segmentIndex);
-  float indexDir = mix(-1.0, 1.0, step(segmentIndex, 0.0));
-  float nextSegmentRatio = getSegmentRatio(segmentIndex + indexDir);
-  if(u_line_type == LineTypeDash) {
-      v_distance_ratio = segmentIndex / segmentNumber;
-      float total_Distance = pixelDistance(a_Instance.rg, a_Instance.ba) / 2.0 * PI;
-      v_dash_array = pow(2.0, 20.0 - u_Zoom) * u_dash_array / (total_Distance / segmentNumber * segmentIndex);
-    }
-  if(u_animate.x == Animate) {
-      v_distance_ratio = segmentIndex / segmentNumber;
-  }
-  vec4 curr = project_position(vec4(interpolate(source, target, segmentRatio), 0.0, 1.0));
-  vec4 next = project_position(vec4(interpolate(source, target, nextSegmentRatio), 0.0, 1.0));
-  v_normal = getNormal((next.xy - curr.xy) * indexDir, a_Position.y);
-  vec2 offset = project_pixel(getExtrusionOffset((next.xy - curr.xy) * indexDir, a_Position.y));
-
-  gl_Position = project_common_position_to_clipspace_v2(vec4(curr.xy + offset, 0, 1.0));
-  setPickingColor(a_PickingColor);
-}

package/lib/line/shaders/line_vert.glsl

@@ -1,165 +0,0 @@
-
-#define Animate 0.0
-
-attribute float a_Miter;
-attribute vec4 a_Color;
-attribute vec2 a_Size;
-attribute vec3 a_Normal;
-attribute vec3 a_Position;
-
-attribute vec2 a_iconMapUV;
-
-// dash line
-attribute float a_Total_Distance;
-attribute vec2 a_DistanceAndIndex;
-
-uniform mat4 u_ModelMatrix;
-
-uniform vec4 u_animate: [ 1., 2., 1.0, 0.2 ];
-uniform float u_icon_step: 100;
-
-uniform float u_heightfixed: 0.0;
-uniform float u_vertexScale: 1.0;
-uniform float u_raisingHeight: 0.0;
-
-#pragma include "projection"
-#pragma include "picking"
-
-varying vec4 v_color;
-varying vec4 v_stroke;
-
-// texV 线图层 - 贴图部分的 v 坐标（线的宽度方向）
-varying vec2 v_iconMapUV;
-
-
-uniform float u_linearColor: 0;
-uniform float u_arrow: 0.0;
-uniform float u_arrowHeight: 3.0;
-uniform float u_arrowWidth: 2.0;
-uniform float u_tailWidth: 1.0;
-
-varying vec4 v_texture_data;
-
-vec2 calculateArrow(vec2 offset) {
-  /*
-  * 在支持箭头的时候，第二、第三组顶点是额外插入用于构建顶点的
-  */
-  float arrowFlag = -1.0;
-  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) {
-    // 高德 2.0 的旋转角度不同
-    arrowFlag = 1.0;
-  }
-  float pi = arrowFlag * 3.1415926/2.;
-  if(a_Miter < 0.) {
-    // 根据线的两侧偏移不同、旋转的方向相反
-    pi = -pi;
-  }
-  highp float angle_sin = sin(pi);
-  highp float angle_cos = cos(pi);
-  // 计算垂直与线方向的旋转矩阵
-  mat2 rotation_matrix = mat2(angle_cos, -1.0 * angle_sin, angle_sin, angle_cos);
-  float arrowWidth = u_arrowWidth;
-  float arrowHeight = u_arrowHeight;
-
-  vec2 arrowOffset = vec2(0.0);
-  /*
-  * a_DistanceAndIndex.y 用于标记当前顶点属于哪一组（两个顶点一组，构成线的其实是矩形，最简需要四个顶点、两组顶点构成）
-  */
-  if(a_DistanceAndIndex.y == 0.0) {
-    // 箭头尖部
-    offset = vec2(0.0);
-  } else if(a_DistanceAndIndex.y == 1.0) {
-    // 箭头两侧
-    arrowOffset = rotation_matrix*(offset * arrowHeight);
-    offset += arrowOffset; // 沿线偏移
-    offset = offset * arrowWidth; // 垂直线向外偏移（是构建箭头两侧的顶点）
-  } else if(a_DistanceAndIndex.y == 2.0 || a_DistanceAndIndex.y == 3.0 || a_DistanceAndIndex.y == 4.0) {
-    // 偏移其余的点位（将长度让位给箭头）
-    arrowOffset = rotation_matrix*(offset * arrowHeight) * arrowWidth;
-    offset += arrowOffset;// 沿线偏移
-  }
-
-  return offset;
-}
-
-void main() {
-  // cal style mapping - 数据纹理映射部分的计算
-
-  
-  float d_texPixelLen;    // 贴图的像素长度，根据地图层级缩放
-
-  v_iconMapUV = a_iconMapUV;
-  d_texPixelLen = project_float_pixel(u_icon_step);
-  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) {
-    d_texPixelLen *= 10.0;
-  }
-
-  v_color = a_Color;
-  v_color.a *= opacity;
-  v_stroke = stroke;
-
-  vec3 size = a_Miter * setPickingSize(a_Size.x) * reverse_offset_normal(a_Normal);
-  
-  vec2 offset = project_pixel(size.xy);
-
-  float lineDistance = a_DistanceAndIndex.x;
-  float currentLinePointRatio = lineDistance / a_Total_Distance;
- 
-  if(u_arrow > 0.0) {
-      //  计算箭头
-    offset = calculateArrow(offset);
-
-    if(a_DistanceAndIndex.y > 4.0) {
-      offset *= mix(1.0, u_tailWidth, currentLinePointRatio);
-    }
-  }
-
-  float lineOffsetWidth = length(offset + offset * sign(a_Miter)); // 线横向偏移的距离（向两侧偏移的和）
-  float linePixelSize = project_pixel(a_Size.x) * 2.0;  // 定点位置偏移，按地图等级缩放后的距离 单侧 * 2
-  float texV = lineOffsetWidth/linePixelSize; // 线图层贴图部分的 v 坐标值
-  
-  v_texture_data = vec4(currentLinePointRatio, lineDistance, d_texPixelLen, texV);
-  // 设置数据集的参数
-
-  vec4 project_pos = project_position(vec4(a_Position.xy, 0, 1.0));
-
-  // gl_Position = project_common_position_to_clipspace(vec4(project_pos.xy + offset, a_Size.y, 1.0));
-
-  float h = float(a_Position.z) * u_vertexScale; // 线顶点的高度 - 兼容不存在第三个数值的情况 vertex height
-  float lineHeight = a_Size.y; // size 第二个参数代表的高度 [linewidth, lineheight]
-
-  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
-    lineHeight *= 0.2; // 保持和 amap/mapbox 一致的效果
-    h *= 0.2;
-    if(u_heightfixed < 1.0) {
-      lineHeight = project_pixel(a_Size.y);
-    }
-    gl_Position = u_Mvp * (vec4(project_pos.xy + offset, lineHeight + h + u_raisingHeight, 1.0));
-  } else {
-    // mapbox -  amap
-    
-    // 兼容 mapbox 在线高度上的效果表现基本一致
-    if(u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT || u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT_OFFSET) {
-      // mapbox
-      // 保持高度相对不变
-      float mapboxZoomScale = 4.0/pow(2.0, 21.0 - u_Zoom);
-      h *= mapboxZoomScale;
-      h += u_raisingHeight * mapboxZoomScale;
-      if(u_heightfixed > 0.0) {
-        lineHeight *= mapboxZoomScale;
-      }
-      
-    } else {
-      // amap
-      h += u_raisingHeight;
-      // lineHeight 顶点偏移高度
-      if(u_heightfixed < 1.0) {
-        lineHeight *= pow(2.0, 20.0 - u_Zoom);
-      }
-    }
-
-    gl_Position = project_common_position_to_clipspace(vec4(project_pos.xy + offset, lineHeight + h, 1.0));
-  }
-
-  setPickingColor(a_PickingColor);
-}

package/lib/line/shaders/linear/arc3d_linear_frag.glsl

@@ -1,32 +0,0 @@
-
-#define Animate 0.0
-uniform float u_time;
-uniform vec4 u_animate: [ 1., 2., 1.0, 0.2 ];
-varying vec4 v_Color;
-
-varying float v_distance_ratio;
-#pragma include "picking"
-
-void main() {
-
-  float animateSpeed = 0.0; // 运动速度
-  gl_FragColor = v_Color;
-
-  if(u_animate.x == Animate) {
-      animateSpeed = u_time / u_animate.y;
-      float alpha =1.0 - fract( mod(1.0- v_distance_ratio, u_animate.z)* (1.0/ u_animate.z) + u_time / u_animate.y);
-
-      alpha = (alpha + u_animate.w -1.0) / u_animate.w;
-      // alpha = smoothstep(0., 1., alpha);
-      alpha = clamp(alpha, 0.0, 1.0);
-      gl_FragColor.a *= alpha;
-
-      // u_animate 
-      // x enable
-      // y duration
-      // z interval
-      // w trailLength
-  }
-
-  gl_FragColor = filterColor(gl_FragColor);
-}