wasmtime 15.0.1 → 16.0.0

data/ext/cargo-vendor/wasmtime-16.0.0/src/module.rs

@@ -0,0 +1,1370 @@
+use crate::{
+    code::CodeObject,
+    resources::ResourcesRequired,
+    signatures::SignatureCollection,
+    types::{ExportType, ExternType, ImportType},
+    Engine,
+};
+use anyhow::{bail, Context, Result};
+use once_cell::sync::OnceCell;
+use std::fs;
+use std::mem;
+use std::ops::Range;
+use std::path::Path;
+use std::ptr::NonNull;
+use std::sync::Arc;
+use wasmparser::{Parser, ValidPayload, Validator};
+use wasmtime_environ::{
+    DefinedFuncIndex, DefinedMemoryIndex, HostPtr, ModuleEnvironment, ModuleTypes, ObjectKind,
+    VMOffsets,
+};
+use wasmtime_jit::{CodeMemory, CompiledModule, CompiledModuleInfo};
+use wasmtime_runtime::{
+    CompiledModuleId, MemoryImage, MmapVec, ModuleMemoryImages, VMArrayCallFunction,
+    VMNativeCallFunction, VMSharedSignatureIndex, VMWasmCallFunction,
+};
+
+mod registry;
+
+pub use registry::{
+    is_wasm_trap_pc, register_code, unregister_code, ModuleRegistry, RegisteredModuleId,
+};
+
+/// A compiled WebAssembly module, ready to be instantiated.
+///
+/// A `Module` is a compiled in-memory representation of an input WebAssembly
+/// binary. A `Module` is then used to create an [`Instance`](crate::Instance)
+/// through an instantiation process. You cannot call functions or fetch
+/// globals, for example, on a `Module` because it's purely a code
+/// representation. Instead you'll need to create an
+/// [`Instance`](crate::Instance) to interact with the wasm module.
+///
+/// Creating a `Module` currently involves compiling code, meaning that it can
+/// be an expensive operation. All `Module` instances are compiled according to
+/// the configuration in [`Config`], but typically they're JIT-compiled. If
+/// you'd like to instantiate a module multiple times you can do so with
+/// compiling the original wasm module only once with a single [`Module`]
+/// instance.
+///
+/// The `Module` is thread-safe and safe to share across threads.
+///
+/// ## Modules and `Clone`
+///
+/// Using `clone` on a `Module` is a cheap operation. It will not create an
+/// entirely new module, but rather just a new reference to the existing module.
+/// In other words it's a shallow copy, not a deep copy.
+///
+/// ## Examples
+///
+/// There are a number of ways you can create a `Module`, for example pulling
+/// the bytes from a number of locations. One example is loading a module from
+/// the filesystem:
+///
+/// ```no_run
+/// # use wasmtime::*;
+/// # fn main() -> anyhow::Result<()> {
+/// let engine = Engine::default();
+/// let module = Module::from_file(&engine, "path/to/foo.wasm")?;
+/// # Ok(())
+/// # }
+/// ```
+///
+/// You can also load the wasm text format if more convenient too:
+///
+/// ```no_run
+/// # use wasmtime::*;
+/// # fn main() -> anyhow::Result<()> {
+/// let engine = Engine::default();
+/// // Now we're using the WebAssembly text extension: `.wat`!
+/// let module = Module::from_file(&engine, "path/to/foo.wat")?;
+/// # Ok(())
+/// # }
+/// ```
+///
+/// And if you've already got the bytes in-memory you can use the
+/// [`Module::new`] constructor:
+///
+/// ```no_run
+/// # use wasmtime::*;
+/// # fn main() -> anyhow::Result<()> {
+/// let engine = Engine::default();
+/// # let wasm_bytes: Vec<u8> = Vec::new();
+/// let module = Module::new(&engine, &wasm_bytes)?;
+///
+/// // It also works with the text format!
+/// let module = Module::new(&engine, "(module (func))")?;
+/// # Ok(())
+/// # }
+/// ```
+///
+/// [`Config`]: crate::Config
+#[derive(Clone)]
+pub struct Module {
+    inner: Arc<ModuleInner>,
+}
+
+struct ModuleInner {
+    engine: Engine,
+    /// The compiled artifacts for this module that will be instantiated and
+    /// executed.
+    module: CompiledModule,
+
+    /// Runtime information such as the underlying mmap, type information, etc.
+    ///
+    /// Note that this `Arc` is used to share information between compiled
+    /// modules within a component. For bare core wasm modules created with
+    /// `Module::new`, for example, this is a uniquely owned `Arc`.
+    code: Arc<CodeObject>,
+
+    /// A set of initialization images for memories, if any.
+    ///
+    /// Note that this is behind a `OnceCell` to lazily create this image. On
+    /// Linux where `memfd_create` may be used to create the backing memory
+    /// image this is a pretty expensive operation, so by deferring it this
+    /// improves memory usage for modules that are created but may not ever be
+    /// instantiated.
+    memory_images: OnceCell<Option<ModuleMemoryImages>>,
+
+    /// Flag indicating whether this module can be serialized or not.
+    serializable: bool,
+
+    /// Runtime offset information for `VMContext`.
+    offsets: VMOffsets<HostPtr>,
+}
+
+impl std::fmt::Debug for Module {
+    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
+        f.debug_struct("Module")
+            .field("name", &self.name())
+            .finish_non_exhaustive()
+    }
+}
+
+impl Module {
+    /// Creates a new WebAssembly `Module` from the given in-memory `bytes`.
+    ///
+    /// The `bytes` provided must be in one of the following formats:
+    ///
+    /// * A [binary-encoded][binary] WebAssembly module. This is always supported.
+    /// * A [text-encoded][text] instance of the WebAssembly text format.
+    ///   This is only supported when the `wat` feature of this crate is enabled.
+    ///   If this is supplied then the text format will be parsed before validation.
+    ///   Note that the `wat` feature is enabled by default.
+    ///
+    /// The data for the wasm module must be loaded in-memory if it's present
+    /// elsewhere, for example on disk. This requires that the entire binary is
+    /// loaded into memory all at once, this API does not support streaming
+    /// compilation of a module.
+    ///
+    /// If the module has not been already been compiled, the WebAssembly binary will
+    /// be decoded and validated. It will also be compiled according to the
+    /// configuration of the provided `engine`.
+    ///
+    /// # Errors
+    ///
+    /// This function may fail and return an error. Errors may include
+    /// situations such as:
+    ///
+    /// * The binary provided could not be decoded because it's not a valid
+    ///   WebAssembly binary
+    /// * The WebAssembly binary may not validate (e.g. contains type errors)
+    /// * Implementation-specific limits were exceeded with a valid binary (for
+    ///   example too many locals)
+    /// * The wasm binary may use features that are not enabled in the
+    ///   configuration of `engine`
+    /// * If the `wat` feature is enabled and the input is text, then it may be
+    ///   rejected if it fails to parse.
+    ///
+    /// The error returned should contain full information about why module
+    /// creation failed if one is returned.
+    ///
+    /// [binary]: https://webassembly.github.io/spec/core/binary/index.html
+    /// [text]: https://webassembly.github.io/spec/core/text/index.html
+    ///
+    /// # Examples
+    ///
+    /// The `new` function can be invoked with a in-memory array of bytes:
+    ///
+    /// ```no_run
+    /// # use wasmtime::*;
+    /// # fn main() -> anyhow::Result<()> {
+    /// # let engine = Engine::default();
+    /// # let wasm_bytes: Vec<u8> = Vec::new();
+    /// let module = Module::new(&engine, &wasm_bytes)?;
+    /// # Ok(())
+    /// # }
+    /// ```
+    ///
+    /// Or you can also pass in a string to be parsed as the wasm text
+    /// format:
+    ///
+    /// ```
+    /// # use wasmtime::*;
+    /// # fn main() -> anyhow::Result<()> {
+    /// # let engine = Engine::default();
+    /// let module = Module::new(&engine, "(module (func))")?;
+    /// # Ok(())
+    /// # }
+    /// ```
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
+    pub fn new(engine: &Engine, bytes: impl AsRef<[u8]>) -> Result<Module> {
+        let bytes = bytes.as_ref();
+        #[cfg(feature = "wat")]
+        let bytes = wat::parse_bytes(bytes)?;
+        Self::from_binary(engine, &bytes)
+    }
+
+    /// Creates a new WebAssembly `Module` from the contents of the given
+    /// `file` on disk.
+    ///
+    /// This is a convenience function that will read the `file` provided and
+    /// pass the bytes to the [`Module::new`] function. For more information
+    /// see [`Module::new`]
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// # use wasmtime::*;
+    /// # fn main() -> anyhow::Result<()> {
+    /// let engine = Engine::default();
+    /// let module = Module::from_file(&engine, "./path/to/foo.wasm")?;
+    /// # Ok(())
+    /// # }
+    /// ```
+    ///
+    /// The `.wat` text format is also supported:
+    ///
+    /// ```no_run
+    /// # use wasmtime::*;
+    /// # fn main() -> anyhow::Result<()> {
+    /// # let engine = Engine::default();
+    /// let module = Module::from_file(&engine, "./path/to/foo.wat")?;
+    /// # Ok(())
+    /// # }
+    /// ```
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
+    pub fn from_file(engine: &Engine, file: impl AsRef<Path>) -> Result<Module> {
+        let file = file.as_ref();
+        match Self::new(
+            engine,
+            &fs::read(file)
+                .with_context(|| format!("failed to read input file: {}", file.display()))?,
+        ) {
+            Ok(m) => Ok(m),
+            Err(e) => {
+                cfg_if::cfg_if! {
+                    if #[cfg(feature = "wat")] {
+                        let mut e = e.downcast::<wat::Error>()?;
+                        e.set_path(file);
+                        bail!(e)
+                    } else {
+                        Err(e)
+                    }
+                }
+            }
+        }
+    }
+
+    /// Creates a new WebAssembly `Module` from the given in-memory `binary`
+    /// data.
+    ///
+    /// This is similar to [`Module::new`] except that it requires that the
+    /// `binary` input is a WebAssembly binary, the text format is not supported
+    /// by this function. It's generally recommended to use [`Module::new`], but
+    /// if it's required to not support the text format this function can be
+    /// used instead.
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// # use wasmtime::*;
+    /// # fn main() -> anyhow::Result<()> {
+    /// # let engine = Engine::default();
+    /// let wasm = b"\0asm\x01\0\0\0";
+    /// let module = Module::from_binary(&engine, wasm)?;
+    /// # Ok(())
+    /// # }
+    /// ```
+    ///
+    /// Note that the text format is **not** accepted by this function:
+    ///
+    /// ```
+    /// # use wasmtime::*;
+    /// # fn main() -> anyhow::Result<()> {
+    /// # let engine = Engine::default();
+    /// assert!(Module::from_binary(&engine, b"(module)").is_err());
+    /// # Ok(())
+    /// # }
+    /// ```
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
+    pub fn from_binary(engine: &Engine, binary: &[u8]) -> Result<Module> {
+        engine
+            .check_compatible_with_native_host()
+            .context("compilation settings are not compatible with the native host")?;
+
+        cfg_if::cfg_if! {
+            if #[cfg(feature = "cache")] {
+                let state = (HashedEngineCompileEnv(engine), binary);
+                let (code, info_and_types) = wasmtime_cache::ModuleCacheEntry::new(
+                    "wasmtime",
+                    engine.cache_config(),
+                )
+                .get_data_raw(
+                    &state,
+
+                    // Cache miss, compute the actual artifacts
+                    |(engine, wasm)| -> Result<_> {
+                        let (mmap, info) = Module::build_artifacts(engine.0, wasm)?;
+                        let code = publish_mmap(mmap)?;
+                        Ok((code, info))
+                    },
+
+                    // Implementation of how to serialize artifacts
+                    |(_engine, _wasm), (code, _info_and_types)| {
+                        Some(code.mmap().to_vec())
+                    },
+
+                    // Cache hit, deserialize the provided artifacts
+                    |(engine, _wasm), serialized_bytes| {
+                        let code = engine.0.load_code_bytes(&serialized_bytes, ObjectKind::Module).ok()?;
+                        Some((code, None))
+                    },
+                )?;
+            } else {
+                let (mmap, info_and_types) = Module::build_artifacts(engine, binary)?;
+                let code = publish_mmap(mmap)?;
+            }
+        };
+
+        let info_and_types = info_and_types.map(|(info, types)| (info, types.into()));
+        return Self::from_parts(engine, code, info_and_types);
+
+        fn publish_mmap(mmap: MmapVec) -> Result<Arc<CodeMemory>> {
+            let mut code = CodeMemory::new(mmap)?;
+            code.publish()?;
+            Ok(Arc::new(code))
+        }
+    }
+
+    /// Creates a new WebAssembly `Module` from the contents of the given `file`
+    /// on disk, but with assumptions that the file is from a trusted source.
+    /// The file should be a binary- or text-format WebAssembly module, or a
+    /// precompiled artifact generated by the same version of Wasmtime.
+    ///
+    /// # Unsafety
+    ///
+    /// All of the reasons that [`deserialize`] is `unsafe` apply to this
+    /// function as well. Arbitrary data loaded from a file may trick Wasmtime
+    /// into arbitrary code execution since the contents of the file are not
+    /// validated to be a valid precompiled module.
+    ///
+    /// [`deserialize`]: Module::deserialize
+    ///
+    /// Additionally though this function is also `unsafe` because the file
+    /// referenced must remain unchanged and a valid precompiled module for the
+    /// entire lifetime of the [`Module`] returned. Any changes to the file on
+    /// disk may change future instantiations of the module to be incorrect.
+    /// This is because the file is mapped into memory and lazily loaded pages
+    /// reflect the current state of the file, not necessarily the origianl
+    /// state of the file.
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
+    pub unsafe fn from_trusted_file(engine: &Engine, file: impl AsRef<Path>) -> Result<Module> {
+        let mmap = MmapVec::from_file(file.as_ref())?;
+        if &mmap[0..4] == b"\x7fELF" {
+            let code = engine.load_code(mmap, ObjectKind::Module)?;
+            return Module::from_parts(engine, code, None);
+        }
+
+        Module::new(engine, &*mmap)
+    }
+
+    /// Converts an input binary-encoded WebAssembly module to compilation
+    /// artifacts and type information.
+    ///
+    /// This is where compilation actually happens of WebAssembly modules and
+    /// translation/parsing/validation of the binary input occurs. The binary
+    /// artifact represented in the `MmapVec` returned here is an in-memory ELF
+    /// file in an owned area of virtual linear memory where permissions (such
+    /// as the executable bit) can be applied.
+    ///
+    /// Additionally compilation returns an `Option` here which is always
+    /// `Some`, notably compiled metadata about the module in addition to the
+    /// type information found within.
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    pub(crate) fn build_artifacts(
+        engine: &Engine,
+        wasm: &[u8],
+    ) -> Result<(MmapVec, Option<(CompiledModuleInfo, ModuleTypes)>)> {
+        use crate::compiler::CompileInputs;
+
+        let tunables = &engine.config().tunables;
+
+        // First a `ModuleEnvironment` is created which records type information
+        // about the wasm module. This is where the WebAssembly is parsed and
+        // validated. Afterwards `types` will have all the type information for
+        // this module.
+        let mut validator =
+            wasmparser::Validator::new_with_features(engine.config().features.clone());
+        let parser = wasmparser::Parser::new(0);
+        let mut types = Default::default();
+        let mut translation = ModuleEnvironment::new(tunables, &mut validator, &mut types)
+            .translate(parser, wasm)
+            .context("failed to parse WebAssembly module")?;
+        let functions = mem::take(&mut translation.function_body_inputs);
+
+        let compile_inputs = CompileInputs::for_module(&types, &translation, functions);
+        let unlinked_compile_outputs = compile_inputs.compile(engine)?;
+        let types = types.finish();
+        let (compiled_funcs, function_indices) = unlinked_compile_outputs.pre_link();
+
+        // Emplace all compiled functions into the object file with any other
+        // sections associated with code as well.
+        let mut object = engine.compiler().object(ObjectKind::Module)?;
+        // Insert `Engine` and type-level information into the compiled
+        // artifact so if this module is deserialized later it contains all
+        // information necessary.
+        //
+        // Note that `append_compiler_info` and `append_types` here in theory
+        // can both be skipped if this module will never get serialized.
+        // They're only used during deserialization and not during runtime for
+        // the module itself. Currently there's no need for that, however, so
+        // it's left as an exercise for later.
+        engine.append_compiler_info(&mut object);
+        engine.append_bti(&mut object);
+
+        let (mut object, compilation_artifacts) = function_indices.link_and_append_code(
+            object,
+            engine,
+            compiled_funcs,
+            std::iter::once(translation).collect(),
+        )?;
+
+        let info = compilation_artifacts.unwrap_as_module_info();
+        object.serialize_info(&(&info, &types));
+        let mmap = object.finish()?;
+
+        Ok((mmap, Some((info, types))))
+    }
+
+    /// Deserializes an in-memory compiled module previously created with
+    /// [`Module::serialize`] or [`Engine::precompile_module`].
+    ///
+    /// This function will deserialize the binary blobs emitted by
+    /// [`Module::serialize`] and [`Engine::precompile_module`] back into an
+    /// in-memory [`Module`] that's ready to be instantiated.
+    ///
+    /// Note that the [`Module::deserialize_file`] method is more optimized than
+    /// this function, so if the serialized module is already present in a file
+    /// it's recommended to use that method instead.
+    ///
+    /// # Unsafety
+    ///
+    /// This function is marked as `unsafe` because if fed invalid input or used
+    /// improperly this could lead to memory safety vulnerabilities. This method
+    /// should not, for example, be exposed to arbitrary user input.
+    ///
+    /// The structure of the binary blob read here is only lightly validated
+    /// internally in `wasmtime`. This is intended to be an efficient
+    /// "rehydration" for a [`Module`] which has very few runtime checks beyond
+    /// deserialization. Arbitrary input could, for example, replace valid
+    /// compiled code with any other valid compiled code, meaning that this can
+    /// trivially be used to execute arbitrary code otherwise.
+    ///
+    /// For these reasons this function is `unsafe`. This function is only
+    /// designed to receive the previous input from [`Module::serialize`] and
+    /// [`Engine::precompile_module`]. If the exact output of those functions
+    /// (unmodified) is passed to this function then calls to this function can
+    /// be considered safe. It is the caller's responsibility to provide the
+    /// guarantee that only previously-serialized bytes are being passed in
+    /// here.
+    ///
+    /// Note that this function is designed to be safe receiving output from
+    /// *any* compiled version of `wasmtime` itself. This means that it is safe
+    /// to feed output from older versions of Wasmtime into this function, in
+    /// addition to newer versions of wasmtime (from the future!). These inputs
+    /// will deterministically and safely produce an `Err`. This function only
+    /// successfully accepts inputs from the same version of `wasmtime`, but the
+    /// safety guarantee only applies to externally-defined blobs of bytes, not
+    /// those defined by any version of wasmtime. (this means that if you cache
+    /// blobs across versions of wasmtime you can be safely guaranteed that
+    /// future versions of wasmtime will reject old cache entries).
+    pub unsafe fn deserialize(engine: &Engine, bytes: impl AsRef<[u8]>) -> Result<Module> {
+        let code = engine.load_code_bytes(bytes.as_ref(), ObjectKind::Module)?;
+        Module::from_parts(engine, code, None)
+    }
+
+    /// Same as [`deserialize`], except that the contents of `path` are read to
+    /// deserialize into a [`Module`].
+    ///
+    /// This method is provided because it can be faster than [`deserialize`]
+    /// since the data doesn't need to be copied around, but rather the module
+    /// can be used directly from an mmap'd view of the file provided.
+    ///
+    /// [`deserialize`]: Module::deserialize
+    ///
+    /// # Unsafety
+    ///
+    /// All of the reasons that [`deserialize`] is `unsafe` applies to this
+    /// function as well. Arbitrary data loaded from a file may trick Wasmtime
+    /// into arbitrary code execution since the contents of the file are not
+    /// validated to be a valid precompiled module.
+    ///
+    /// Additionally though this function is also `unsafe` because the file
+    /// referenced must remain unchanged and a valid precompiled module for the
+    /// entire lifetime of the [`Module`] returned. Any changes to the file on
+    /// disk may change future instantiations of the module to be incorrect.
+    /// This is because the file is mapped into memory and lazily loaded pages
+    /// reflect the current state of the file, not necessarily the origianl
+    /// state of the file.
+    pub unsafe fn deserialize_file(engine: &Engine, path: impl AsRef<Path>) -> Result<Module> {
+        let code = engine.load_code_file(path.as_ref(), ObjectKind::Module)?;
+        Module::from_parts(engine, code, None)
+    }
+
+    /// Entrypoint for creating a `Module` for all above functions, both
+    /// of the AOT and jit-compiled cateogries.
+    ///
+    /// In all cases the compilation artifact, `code_memory`, is provided here.
+    /// The `info_and_types` argument is `None` when a module is being
+    /// deserialized from a precompiled artifact or it's `Some` if it was just
+    /// compiled and the values are already available.
+    fn from_parts(
+        engine: &Engine,
+        code_memory: Arc<CodeMemory>,
+        info_and_types: Option<(CompiledModuleInfo, ModuleTypes)>,
+    ) -> Result<Self> {
+        // Acquire this module's metadata and type information, deserializing
+        // it from the provided artifact if it wasn't otherwise provided
+        // already.
+        let (info, types) = match info_and_types {
+            Some((info, types)) => (info, types),
+            None => bincode::deserialize(code_memory.wasmtime_info())?,
+        };
+
+        // Register function type signatures into the engine for the lifetime
+        // of the `Module` that will be returned. This notably also builds up
+        // maps for trampolines to be used for this module when inserted into
+        // stores.
+        //
+        // Note that the unsafety here should be ok since the `trampolines`
+        // field should only point to valid trampoline function pointers
+        // within the text section.
+        let signatures = SignatureCollection::new_for_module(engine.signatures(), &types);
+
+        // Package up all our data into a `CodeObject` and delegate to the final
+        // step of module compilation.
+        let code = Arc::new(CodeObject::new(code_memory, signatures, types.into()));
+        Module::from_parts_raw(engine, code, info, true)
+    }
+
+    pub(crate) fn from_parts_raw(
+        engine: &Engine,
+        code: Arc<CodeObject>,
+        info: CompiledModuleInfo,
+        serializable: bool,
+    ) -> Result<Self> {
+        let module = CompiledModule::from_artifacts(
+            code.code_memory().clone(),
+            info,
+            engine.profiler(),
+            engine.unique_id_allocator(),
+        )?;
+
+        // Validate the module can be used with the current instance allocator.
+        let offsets = VMOffsets::new(HostPtr, module.module());
+        engine
+            .allocator()
+            .validate_module(module.module(), &offsets)?;
+
+        Ok(Self {
+            inner: Arc::new(ModuleInner {
+                engine: engine.clone(),
+                code,
+                memory_images: OnceCell::new(),
+                module,
+                serializable,
+                offsets,
+            }),
+        })
+    }
+
+    /// Validates `binary` input data as a WebAssembly binary given the
+    /// configuration in `engine`.
+    ///
+    /// This function will perform a speedy validation of the `binary` input
+    /// WebAssembly module (which is in [binary form][binary], the text format
+    /// is not accepted by this function) and return either `Ok` or `Err`
+    /// depending on the results of validation. The `engine` argument indicates
+    /// configuration for WebAssembly features, for example, which are used to
+    /// indicate what should be valid and what shouldn't be.
+    ///
+    /// Validation automatically happens as part of [`Module::new`].
+    ///
+    /// # Errors
+    ///
+    /// If validation fails for any reason (type check error, usage of a feature
+    /// that wasn't enabled, etc) then an error with a description of the
+    /// validation issue will be returned.
+    ///
+    /// [binary]: https://webassembly.github.io/spec/core/binary/index.html
+    pub fn validate(engine: &Engine, binary: &[u8]) -> Result<()> {
+        let mut validator = Validator::new_with_features(engine.config().features);
+
+        let mut functions = Vec::new();
+        for payload in Parser::new(0).parse_all(binary) {
+            let payload = payload?;
+            if let ValidPayload::Func(a, b) = validator.payload(&payload)? {
+                functions.push((a, b));
+            }
+            if let wasmparser::Payload::Version { encoding, .. } = &payload {
+                if let wasmparser::Encoding::Component = encoding {
+                    bail!("component passed to module validation");
+                }
+            }
+        }
+
+        engine.run_maybe_parallel(functions, |(validator, body)| {
+            // FIXME: it would be best here to use a rayon-specific parallel
+            // iterator that maintains state-per-thread to share the function
+            // validator allocations (`Default::default` here) across multiple
+            // functions.
+            validator.into_validator(Default::default()).validate(&body)
+        })?;
+        Ok(())
+    }
+
+    /// Serializes this module to a vector of bytes.
+    ///
+    /// This function is similar to the [`Engine::precompile_module`] method
+    /// where it produces an artifact of Wasmtime which is suitable to later
+    /// pass into [`Module::deserialize`]. If a module is never instantiated
+    /// then it's recommended to use [`Engine::precompile_module`] instead of
+    /// this method, but if a module is both instantiated and serialized then
+    /// this method can be useful to get the serialized version without
+    /// compiling twice.
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
+    pub fn serialize(&self) -> Result<Vec<u8>> {
+        // The current representation of compiled modules within a compiled
+        // component means that it cannot be serialized. The mmap returned here
+        // is the mmap for the entire component and while it contains all
+        // necessary data to deserialize this particular module it's all
+        // embedded within component-specific information.
+        //
+        // It's not the hardest thing in the world to support this but it's
+        // expected that there's not much of a use case at this time. In theory
+        // all that needs to be done is to edit the `.wasmtime.info` section
+        // to contains this module's metadata instead of the metadata for the
+        // whole component. The metadata itself is fairly trivially
+        // recreateable here it's more that there's no easy one-off API for
+        // editing the sections of an ELF object to use here.
+        //
+        // Overall for now this simply always returns an error in this
+        // situation. If you're reading this and feel that the situation should
+        // be different please feel free to open an issue.
+        if !self.inner.serializable {
+            bail!("cannot serialize a module exported from a component");
+        }
+        Ok(self.compiled_module().mmap().to_vec())
+    }
+
+    pub(crate) fn compiled_module(&self) -> &CompiledModule {
+        &self.inner.module
+    }
+
+    fn code_object(&self) -> &Arc<CodeObject> {
+        &self.inner.code
+    }
+
+    pub(crate) fn env_module(&self) -> &wasmtime_environ::Module {
+        self.compiled_module().module()
+    }
+
+    pub(crate) fn types(&self) -> &ModuleTypes {
+        self.inner.code.module_types()
+    }
+
+    pub(crate) fn signatures(&self) -> &SignatureCollection {
+        self.inner.code.signatures()
+    }
+
+    /// Returns identifier/name that this [`Module`] has. This name
+    /// is used in traps/backtrace details.
+    ///
+    /// Note that most LLVM/clang/Rust-produced modules do not have a name
+    /// associated with them, but other wasm tooling can be used to inject or
+    /// add a name.
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// # use wasmtime::*;
+    /// # fn main() -> anyhow::Result<()> {
+    /// # let engine = Engine::default();
+    /// let module = Module::new(&engine, "(module $foo)")?;
+    /// assert_eq!(module.name(), Some("foo"));
+    ///
+    /// let module = Module::new(&engine, "(module)")?;
+    /// assert_eq!(module.name(), None);
+    ///
+    /// # Ok(())
+    /// # }
+    /// ```
+    pub fn name(&self) -> Option<&str> {
+        self.compiled_module().module().name.as_deref()
+    }
+
+    /// Returns the list of imports that this [`Module`] has and must be
+    /// satisfied.
+    ///
+    /// This function returns the list of imports that the wasm module has, but
+    /// only the types of each import. The type of each import is used to
+    /// typecheck the [`Instance::new`](crate::Instance::new) method's `imports`
+    /// argument. The arguments to that function must match up 1-to-1 with the
+    /// entries in the array returned here.
+    ///
+    /// The imports returned reflect the order of the imports in the wasm module
+    /// itself, and note that no form of deduplication happens.
+    ///
+    /// # Examples
+    ///
+    /// Modules with no imports return an empty list here:
+    ///
+    /// ```
+    /// # use wasmtime::*;
+    /// # fn main() -> anyhow::Result<()> {
+    /// # let engine = Engine::default();
+    /// let module = Module::new(&engine, "(module)")?;
+    /// assert_eq!(module.imports().len(), 0);
+    /// # Ok(())
+    /// # }
+    /// ```
+    ///
+    /// and modules with imports will have a non-empty list:
+    ///
+    /// ```
+    /// # use wasmtime::*;
+    /// # fn main() -> anyhow::Result<()> {
+    /// # let engine = Engine::default();
+    /// let wat = r#"
+    ///     (module
+    ///         (import "host" "foo" (func))
+    ///     )
+    /// "#;
+    /// let module = Module::new(&engine, wat)?;
+    /// assert_eq!(module.imports().len(), 1);
+    /// let import = module.imports().next().unwrap();
+    /// assert_eq!(import.module(), "host");
+    /// assert_eq!(import.name(), "foo");
+    /// match import.ty() {
+    ///     ExternType::Func(_) => { /* ... */ }
+    ///     _ => panic!("unexpected import type!"),
+    /// }
+    /// # Ok(())
+    /// # }
+    /// ```
+    pub fn imports<'module>(
+        &'module self,
+    ) -> impl ExactSizeIterator<Item = ImportType<'module>> + 'module {
+        let module = self.compiled_module().module();
+        let types = self.types();
+        module
+            .imports()
+            .map(move |(module, field, ty)| ImportType::new(module, field, ty, types))
+            .collect::<Vec<_>>()
+            .into_iter()
+    }
+
+    /// Returns the list of exports that this [`Module`] has and will be
+    /// available after instantiation.
+    ///
+    /// This function will return the type of each item that will be returned
+    /// from [`Instance::exports`](crate::Instance::exports). Each entry in this
+    /// list corresponds 1-to-1 with that list, and the entries here will
+    /// indicate the name of the export along with the type of the export.
+    ///
+    /// # Examples
+    ///
+    /// Modules might not have any exports:
+    ///
+    /// ```
+    /// # use wasmtime::*;
+    /// # fn main() -> anyhow::Result<()> {
+    /// # let engine = Engine::default();
+    /// let module = Module::new(&engine, "(module)")?;
+    /// assert!(module.exports().next().is_none());
+    /// # Ok(())
+    /// # }
+    /// ```
+    ///
+    /// When the exports are not empty, you can inspect each export:
+    ///
+    /// ```
+    /// # use wasmtime::*;
+    /// # fn main() -> anyhow::Result<()> {
+    /// # let engine = Engine::default();
+    /// let wat = r#"
+    ///     (module
+    ///         (func (export "foo"))
+    ///         (memory (export "memory") 1)
+    ///     )
+    /// "#;
+    /// let module = Module::new(&engine, wat)?;
+    /// assert_eq!(module.exports().len(), 2);
+    ///
+    /// let mut exports = module.exports();
+    /// let foo = exports.next().unwrap();
+    /// assert_eq!(foo.name(), "foo");
+    /// match foo.ty() {
+    ///     ExternType::Func(_) => { /* ... */ }
+    ///     _ => panic!("unexpected export type!"),
+    /// }
+    ///
+    /// let memory = exports.next().unwrap();
+    /// assert_eq!(memory.name(), "memory");
+    /// match memory.ty() {
+    ///     ExternType::Memory(_) => { /* ... */ }
+    ///     _ => panic!("unexpected export type!"),
+    /// }
+    /// # Ok(())
+    /// # }
+    /// ```
+    pub fn exports<'module>(
+        &'module self,
+    ) -> impl ExactSizeIterator<Item = ExportType<'module>> + 'module {
+        let module = self.compiled_module().module();
+        let types = self.types();
+        module.exports.iter().map(move |(name, entity_index)| {
+            ExportType::new(name, module.type_of(*entity_index), types)
+        })
+    }
+
+    /// Looks up an export in this [`Module`] by name.
+    ///
+    /// This function will return the type of an export with the given name.
+    ///
+    /// # Examples
+    ///
+    /// There may be no export with that name:
+    ///
+    /// ```
+    /// # use wasmtime::*;
+    /// # fn main() -> anyhow::Result<()> {
+    /// # let engine = Engine::default();
+    /// let module = Module::new(&engine, "(module)")?;
+    /// assert!(module.get_export("foo").is_none());
+    /// # Ok(())
+    /// # }
+    /// ```
+    ///
+    /// When there is an export with that name, it is returned:
+    ///
+    /// ```
+    /// # use wasmtime::*;
+    /// # fn main() -> anyhow::Result<()> {
+    /// # let engine = Engine::default();
+    /// let wat = r#"
+    ///     (module
+    ///         (func (export "foo"))
+    ///         (memory (export "memory") 1)
+    ///     )
+    /// "#;
+    /// let module = Module::new(&engine, wat)?;
+    /// let foo = module.get_export("foo");
+    /// assert!(foo.is_some());
+    ///
+    /// let foo = foo.unwrap();
+    /// match foo {
+    ///     ExternType::Func(_) => { /* ... */ }
+    ///     _ => panic!("unexpected export type!"),
+    /// }
+    ///
+    /// # Ok(())
+    /// # }
+    /// ```
+    pub fn get_export(&self, name: &str) -> Option<ExternType> {
+        let module = self.compiled_module().module();
+        let entity_index = module.exports.get(name)?;
+        Some(ExternType::from_wasmtime(
+            self.types(),
+            &module.type_of(*entity_index),
+        ))
+    }
+
+    /// Returns the [`Engine`] that this [`Module`] was compiled by.
+    pub fn engine(&self) -> &Engine {
+        &self.inner.engine
+    }
+
+    /// Returns a summary of the resources required to instantiate this
+    /// [`Module`].
+    ///
+    /// Potential uses of the returned information:
+    ///
+    /// * Determining whether your pooling allocator configuration supports
+    ///   instantiating this module.
+    ///
+    /// * Deciding how many of which `Module` you want to instantiate within a
+    ///   fixed amount of resources, e.g. determining whether to create 5
+    ///   instances of module X or 10 instances of module Y.
+    ///
+    /// # Example
+    ///
+    /// ```
+    /// # fn main() -> wasmtime::Result<()> {
+    /// use wasmtime::{Config, Engine, Module};
+    ///
+    /// let mut config = Config::new();
+    /// config.wasm_multi_memory(true);
+    /// let engine = Engine::new(&config)?;
+    ///
+    /// let module = Module::new(&engine, r#"
+    ///     (module
+    ///         ;; Import a memory. Doesn't count towards required resources.
+    ///         (import "a" "b" (memory 10))
+    ///         ;; Define two local memories. These count towards the required
+    ///         ;; resources.
+    ///         (memory 1)
+    ///         (memory 6)
+    ///     )
+    /// "#)?;
+    ///
+    /// let resources = module.resources_required();
+    ///
+    /// // Instantiating the module will require allocating two memories, and
+    /// // the maximum initial memory size is six Wasm pages.
+    /// assert_eq!(resources.num_memories, 2);
+    /// assert_eq!(resources.max_initial_memory_size, Some(6));
+    ///
+    /// // The module doesn't need any tables.
+    /// assert_eq!(resources.num_tables, 0);
+    /// assert_eq!(resources.max_initial_table_size, None);
+    /// # Ok(()) }
+    /// ```
+    pub fn resources_required(&self) -> ResourcesRequired {
+        let em = self.env_module();
+        let num_memories = u32::try_from(em.memory_plans.len() - em.num_imported_memories).unwrap();
+        let max_initial_memory_size = em
+            .memory_plans
+            .values()
+            .skip(em.num_imported_memories)
+            .map(|plan| plan.memory.minimum)
+            .max();
+        let num_tables = u32::try_from(em.table_plans.len() - em.num_imported_tables).unwrap();
+        let max_initial_table_size = em
+            .table_plans
+            .values()
+            .skip(em.num_imported_tables)
+            .map(|plan| plan.table.minimum)
+            .max();
+        ResourcesRequired {
+            num_memories,
+            max_initial_memory_size,
+            num_tables,
+            max_initial_table_size,
+        }
+    }
+
+    /// Returns the `ModuleInner` cast as `ModuleRuntimeInfo` for use
+    /// by the runtime.
+    pub(crate) fn runtime_info(&self) -> Arc<dyn wasmtime_runtime::ModuleRuntimeInfo> {
+        // N.B.: this needs to return a clone because we cannot
+        // statically cast the &Arc<ModuleInner> to &Arc<dyn Trait...>.
+        self.inner.clone()
+    }
+
+    pub(crate) fn module_info(&self) -> &dyn wasmtime_runtime::ModuleInfo {
+        &*self.inner
+    }
+
+    /// Returns the range of bytes in memory where this module's compilation
+    /// image resides.
+    ///
+    /// The compilation image for a module contains executable code, data, debug
+    /// information, etc. This is roughly the same as the `Module::serialize`
+    /// but not the exact same.
+    ///
+    /// The range of memory reported here is exposed to allow low-level
+    /// manipulation of the memory in platform-specific manners such as using
+    /// `mlock` to force the contents to be paged in immediately or keep them
+    /// paged in after they're loaded.
+    ///
+    /// It is not safe to modify the memory in this range, nor is it safe to
+    /// modify the protections of memory in this range.
+    pub fn image_range(&self) -> Range<usize> {
+        self.compiled_module().image_range()
+    }
+
+    /// Force initialization of copy-on-write images to happen here-and-now
+    /// instead of when they're requested during first instantiation.
+    ///
+    /// When [copy-on-write memory
+    /// initialization](crate::Config::memory_init_cow) is enabled then Wasmtime
+    /// will lazily create the initialization image for a module. This method
+    /// can be used to explicitly dictate when this initialization happens.
+    ///
+    /// Note that this largely only matters on Linux when memfd is used.
+    /// Otherwise the copy-on-write image typically comes from disk and in that
+    /// situation the creation of the image is trivial as the image is always
+    /// sourced from disk. On Linux, though, when memfd is used a memfd is
+    /// created and the initialization image is written to it.
+    ///
+    /// Also note that this method is not required to be called, it's available
+    /// as a performance optimization if required but is otherwise handled
+    /// automatically.
+    pub fn initialize_copy_on_write_image(&self) -> Result<()> {
+        self.inner.memory_images()?;
+        Ok(())
+    }
+
+    /// Get the map from `.text` section offsets to Wasm binary offsets for this
+    /// module.
+    ///
+    /// Each entry is a (`.text` section offset, Wasm binary offset) pair.
+    ///
+    /// Entries are yielded in order of `.text` section offset.
+    ///
+    /// Some entries are missing a Wasm binary offset. This is for code that is
+    /// not associated with any single location in the Wasm binary, or for when
+    /// source information was optimized away.
+    ///
+    /// Not every module has an address map, since address map generation can be
+    /// turned off on `Config`.
+    ///
+    /// There is not an entry for every `.text` section offset. Every offset
+    /// after an entry's offset, but before the next entry's offset, is
+    /// considered to map to the same Wasm binary offset as the original
+    /// entry. For example, the address map will not contain the following
+    /// sequnce of entries:
+    ///
+    /// ```ignore
+    /// [
+    ///     // ...
+    ///     (10, Some(42)),
+    ///     (11, Some(42)),
+    ///     (12, Some(42)),
+    ///     (13, Some(43)),
+    ///     // ...
+    /// ]
+    /// ```
+    ///
+    /// Instead, it will drop the entries for offsets `11` and `12` since they
+    /// are the same as the entry for offset `10`:
+    ///
+    /// ```ignore
+    /// [
+    ///     // ...
+    ///     (10, Some(42)),
+    ///     (13, Some(43)),
+    ///     // ...
+    /// ]
+    /// ```
+    pub fn address_map<'a>(&'a self) -> Option<impl Iterator<Item = (usize, Option<u32>)> + 'a> {
+        Some(
+            wasmtime_environ::iterate_address_map(
+                self.code_object().code_memory().address_map_data(),
+            )?
+            .map(|(offset, file_pos)| (offset as usize, file_pos.file_offset())),
+        )
+    }
+
+    /// Get this module's code object's `.text` section, containing its compiled
+    /// executable code.
+    pub fn text(&self) -> &[u8] {
+        self.code_object().code_memory().text()
+    }
+
+    /// Get the locations of functions in this module's `.text` section.
+    ///
+    /// Each function's locartion is a (`.text` section offset, length) pair.
+    pub fn function_locations<'a>(&'a self) -> impl ExactSizeIterator<Item = (usize, usize)> + 'a {
+        self.compiled_module().finished_functions().map(|(f, _)| {
+            let loc = self.compiled_module().func_loc(f);
+            (loc.start as usize, loc.length as usize)
+        })
+    }
+
+    pub(crate) fn id(&self) -> CompiledModuleId {
+        self.inner.module.unique_id()
+    }
+}
+
+impl ModuleInner {
+    fn memory_images(&self) -> Result<Option<&ModuleMemoryImages>> {
+        let images = self
+            .memory_images
+            .get_or_try_init(|| memory_images(&self.engine, &self.module))?
+            .as_ref();
+        Ok(images)
+    }
+}
+
+impl Drop for ModuleInner {
+    fn drop(&mut self) {
+        // When a `Module` is being dropped that means that it's no longer
+        // present in any `Store` and it's additionally not longer held by any
+        // embedder. Take this opportunity to purge any lingering instantiations
+        // within a pooling instance allocator, if applicable.
+        self.engine
+            .allocator()
+            .purge_module(self.module.unique_id());
+    }
+}
+
+fn _assert_send_sync() {
+    fn _assert<T: Send + Sync>() {}
+    _assert::<Module>();
+}
+
+/// This is a helper struct used when caching to hash the state of an `Engine`
+/// used for module compilation.
+///
+/// The hash computed for this structure is used to key the global wasmtime
+/// cache and dictates whether artifacts are reused. Consequently the contents
+/// of this hash dictate when artifacts are or aren't re-used.
+#[cfg(any(feature = "cranelift", feature = "winch"))]
+pub(crate) struct HashedEngineCompileEnv<'a>(pub &'a Engine);
+
+#[cfg(any(feature = "cranelift", feature = "winch"))]
+impl std::hash::Hash for HashedEngineCompileEnv<'_> {
+    fn hash<H: std::hash::Hasher>(&self, hasher: &mut H) {
+        // Hash the compiler's state based on its target and configuration.
+        let compiler = self.0.compiler();
+        compiler.triple().hash(hasher);
+        compiler.flags().hash(hasher);
+        compiler.isa_flags().hash(hasher);
+
+        // Hash configuration state read for compilation
+        let config = self.0.config();
+        config.tunables.hash(hasher);
+        config.features.hash(hasher);
+        config.wmemcheck.hash(hasher);
+
+        // Catch accidental bugs of reusing across crate versions.
+        config.module_version.hash(hasher);
+    }
+}
+
+impl wasmtime_runtime::ModuleRuntimeInfo for ModuleInner {
+    fn module(&self) -> &Arc<wasmtime_environ::Module> {
+        self.module.module()
+    }
+
+    fn function(&self, index: DefinedFuncIndex) -> NonNull<VMWasmCallFunction> {
+        let ptr = self
+            .module
+            .finished_function(index)
+            .as_ptr()
+            .cast::<VMWasmCallFunction>()
+            .cast_mut();
+        NonNull::new(ptr).unwrap()
+    }
+
+    fn native_to_wasm_trampoline(
+        &self,
+        index: DefinedFuncIndex,
+    ) -> Option<NonNull<VMNativeCallFunction>> {
+        let ptr = self
+            .module
+            .native_to_wasm_trampoline(index)?
+            .as_ptr()
+            .cast::<VMNativeCallFunction>()
+            .cast_mut();
+        Some(NonNull::new(ptr).unwrap())
+    }
+
+    fn array_to_wasm_trampoline(&self, index: DefinedFuncIndex) -> Option<VMArrayCallFunction> {
+        let ptr = self.module.array_to_wasm_trampoline(index)?.as_ptr();
+        Some(unsafe { mem::transmute::<*const u8, VMArrayCallFunction>(ptr) })
+    }
+
+    fn wasm_to_native_trampoline(
+        &self,
+        signature: VMSharedSignatureIndex,
+    ) -> Option<NonNull<VMWasmCallFunction>> {
+        let sig = self.code.signatures().local_signature(signature)?;
+        let ptr = self
+            .module
+            .wasm_to_native_trampoline(sig)
+            .as_ptr()
+            .cast::<VMWasmCallFunction>()
+            .cast_mut();
+        Some(NonNull::new(ptr).unwrap())
+    }
+
+    fn memory_image(&self, memory: DefinedMemoryIndex) -> Result<Option<&Arc<MemoryImage>>> {
+        let images = self.memory_images()?;
+        Ok(images.and_then(|images| images.get_memory_image(memory)))
+    }
+
+    fn unique_id(&self) -> Option<CompiledModuleId> {
+        Some(self.module.unique_id())
+    }
+
+    fn wasm_data(&self) -> &[u8] {
+        self.module.code_memory().wasm_data()
+    }
+
+    fn signature_ids(&self) -> &[VMSharedSignatureIndex] {
+        self.code.signatures().as_module_map().values().as_slice()
+    }
+
+    fn offsets(&self) -> &VMOffsets<HostPtr> {
+        &self.offsets
+    }
+}
+
+impl wasmtime_runtime::ModuleInfo for ModuleInner {
+    fn lookup_stack_map(&self, pc: usize) -> Option<&wasmtime_environ::StackMap> {
+        let text_offset = pc - self.module.text().as_ptr() as usize;
+        let (index, func_offset) = self.module.func_by_text_offset(text_offset)?;
+        let info = self.module.wasm_func_info(index);
+
+        // Do a binary search to find the stack map for the given offset.
+        let index = match info
+            .stack_maps
+            .binary_search_by_key(&func_offset, |i| i.code_offset)
+        {
+            // Found it.
+            Ok(i) => i,
+
+            // No stack map associated with this PC.
+            //
+            // Because we know we are in Wasm code, and we must be at some kind
+            // of call/safepoint, then the Cranelift backend must have avoided
+            // emitting a stack map for this location because no refs were live.
+            Err(_) => return None,
+        };
+
+        Some(&info.stack_maps[index].stack_map)
+    }
+}
+
+/// A barebones implementation of ModuleRuntimeInfo that is useful for
+/// cases where a purpose-built environ::Module is used and a full
+/// CompiledModule does not exist (for example, for tests or for the
+/// default-callee instance).
+pub(crate) struct BareModuleInfo {
+    module: Arc<wasmtime_environ::Module>,
+    one_signature: Option<VMSharedSignatureIndex>,
+    offsets: VMOffsets<HostPtr>,
+}
+
+impl BareModuleInfo {
+    pub(crate) fn empty(module: Arc<wasmtime_environ::Module>) -> Self {
+        BareModuleInfo::maybe_imported_func(module, None)
+    }
+
+    pub(crate) fn maybe_imported_func(
+        module: Arc<wasmtime_environ::Module>,
+        one_signature: Option<VMSharedSignatureIndex>,
+    ) -> Self {
+        BareModuleInfo {
+            offsets: VMOffsets::new(HostPtr, &module),
+            module,
+            one_signature,
+        }
+    }
+
+    pub(crate) fn into_traitobj(self) -> Arc<dyn wasmtime_runtime::ModuleRuntimeInfo> {
+        Arc::new(self)
+    }
+}
+
+impl wasmtime_runtime::ModuleRuntimeInfo for BareModuleInfo {
+    fn module(&self) -> &Arc<wasmtime_environ::Module> {
+        &self.module
+    }
+
+    fn function(&self, _index: DefinedFuncIndex) -> NonNull<VMWasmCallFunction> {
+        unreachable!()
+    }
+
+    fn array_to_wasm_trampoline(&self, _index: DefinedFuncIndex) -> Option<VMArrayCallFunction> {
+        unreachable!()
+    }
+
+    fn native_to_wasm_trampoline(
+        &self,
+        _index: DefinedFuncIndex,
+    ) -> Option<NonNull<VMNativeCallFunction>> {
+        unreachable!()
+    }
+
+    fn wasm_to_native_trampoline(
+        &self,
+        _signature: VMSharedSignatureIndex,
+    ) -> Option<NonNull<VMWasmCallFunction>> {
+        unreachable!()
+    }
+
+    fn memory_image(&self, _memory: DefinedMemoryIndex) -> Result<Option<&Arc<MemoryImage>>> {
+        Ok(None)
+    }
+
+    fn unique_id(&self) -> Option<CompiledModuleId> {
+        None
+    }
+
+    fn wasm_data(&self) -> &[u8] {
+        &[]
+    }
+
+    fn signature_ids(&self) -> &[VMSharedSignatureIndex] {
+        match &self.one_signature {
+            Some(id) => std::slice::from_ref(id),
+            None => &[],
+        }
+    }
+
+    fn offsets(&self) -> &VMOffsets<HostPtr> {
+        &self.offsets
+    }
+}
+
+/// Helper method to construct a `ModuleMemoryImages` for an associated
+/// `CompiledModule`.
+fn memory_images(engine: &Engine, module: &CompiledModule) -> Result<Option<ModuleMemoryImages>> {
+    // If initialization via copy-on-write is explicitly disabled in
+    // configuration then this path is skipped entirely.
+    if !engine.config().memory_init_cow {
+        return Ok(None);
+    }
+
+    // ... otherwise logic is delegated to the `ModuleMemoryImages::new`
+    // constructor.
+    let mmap = if engine.config().force_memory_init_memfd {
+        None
+    } else {
+        Some(module.mmap())
+    };
+    ModuleMemoryImages::new(module.module(), module.code_memory().wasm_data(), mmap)
+}
+
+#[cfg(test)]
+mod tests {
+    use crate::{Engine, Module};
+    use wasmtime_environ::MemoryInitialization;
+
+    #[test]
+    fn cow_on_by_default() {
+        let engine = Engine::default();
+        let module = Module::new(
+            &engine,
+            r#"
+                (module
+                    (memory 1)
+                    (data (i32.const 100) "abcd")
+                )
+            "#,
+        )
+        .unwrap();
+
+        let init = &module.env_module().memory_initialization;
+        assert!(matches!(init, MemoryInitialization::Static { .. }));
+    }
+}