wasmtime 15.0.1 → 16.0.0

data/ext/cargo-vendor/wasmtime-15.0.1/src/module.rs

@@ -1,1370 +0,0 @@
-use crate::{
-    code::CodeObject,
-    resources::ResourcesRequired,
-    signatures::SignatureCollection,
-    types::{ExportType, ExternType, ImportType},
-    Engine,
-};
-use anyhow::{bail, Context, Result};
-use once_cell::sync::OnceCell;
-use std::fs;
-use std::mem;
-use std::ops::Range;
-use std::path::Path;
-use std::ptr::NonNull;
-use std::sync::Arc;
-use wasmparser::{Parser, ValidPayload, Validator};
-use wasmtime_environ::{
-    DefinedFuncIndex, DefinedMemoryIndex, HostPtr, ModuleEnvironment, ModuleTypes, ObjectKind,
-    VMOffsets,
-};
-use wasmtime_jit::{CodeMemory, CompiledModule, CompiledModuleInfo};
-use wasmtime_runtime::{
-    CompiledModuleId, MemoryImage, MmapVec, ModuleMemoryImages, VMArrayCallFunction,
-    VMNativeCallFunction, VMSharedSignatureIndex, VMWasmCallFunction,
-};
-
-mod registry;
-
-pub use registry::{
-    is_wasm_trap_pc, register_code, unregister_code, ModuleRegistry, RegisteredModuleId,
-};
-
-/// A compiled WebAssembly module, ready to be instantiated.
-///
-/// A `Module` is a compiled in-memory representation of an input WebAssembly
-/// binary. A `Module` is then used to create an [`Instance`](crate::Instance)
-/// through an instantiation process. You cannot call functions or fetch
-/// globals, for example, on a `Module` because it's purely a code
-/// representation. Instead you'll need to create an
-/// [`Instance`](crate::Instance) to interact with the wasm module.
-///
-/// Creating a `Module` currently involves compiling code, meaning that it can
-/// be an expensive operation. All `Module` instances are compiled according to
-/// the configuration in [`Config`], but typically they're JIT-compiled. If
-/// you'd like to instantiate a module multiple times you can do so with
-/// compiling the original wasm module only once with a single [`Module`]
-/// instance.
-///
-/// The `Module` is thread-safe and safe to share across threads.
-///
-/// ## Modules and `Clone`
-///
-/// Using `clone` on a `Module` is a cheap operation. It will not create an
-/// entirely new module, but rather just a new reference to the existing module.
-/// In other words it's a shallow copy, not a deep copy.
-///
-/// ## Examples
-///
-/// There are a number of ways you can create a `Module`, for example pulling
-/// the bytes from a number of locations. One example is loading a module from
-/// the filesystem:
-///
-/// ```no_run
-/// # use wasmtime::*;
-/// # fn main() -> anyhow::Result<()> {
-/// let engine = Engine::default();
-/// let module = Module::from_file(&engine, "path/to/foo.wasm")?;
-/// # Ok(())
-/// # }
-/// ```
-///
-/// You can also load the wasm text format if more convenient too:
-///
-/// ```no_run
-/// # use wasmtime::*;
-/// # fn main() -> anyhow::Result<()> {
-/// let engine = Engine::default();
-/// // Now we're using the WebAssembly text extension: `.wat`!
-/// let module = Module::from_file(&engine, "path/to/foo.wat")?;
-/// # Ok(())
-/// # }
-/// ```
-///
-/// And if you've already got the bytes in-memory you can use the
-/// [`Module::new`] constructor:
-///
-/// ```no_run
-/// # use wasmtime::*;
-/// # fn main() -> anyhow::Result<()> {
-/// let engine = Engine::default();
-/// # let wasm_bytes: Vec<u8> = Vec::new();
-/// let module = Module::new(&engine, &wasm_bytes)?;
-///
-/// // It also works with the text format!
-/// let module = Module::new(&engine, "(module (func))")?;
-/// # Ok(())
-/// # }
-/// ```
-///
-/// [`Config`]: crate::Config
-#[derive(Clone)]
-pub struct Module {
-    inner: Arc<ModuleInner>,
-}
-
-struct ModuleInner {
-    engine: Engine,
-    /// The compiled artifacts for this module that will be instantiated and
-    /// executed.
-    module: CompiledModule,
-
-    /// Runtime information such as the underlying mmap, type information, etc.
-    ///
-    /// Note that this `Arc` is used to share information between compiled
-    /// modules within a component. For bare core wasm modules created with
-    /// `Module::new`, for example, this is a uniquely owned `Arc`.
-    code: Arc<CodeObject>,
-
-    /// A set of initialization images for memories, if any.
-    ///
-    /// Note that this is behind a `OnceCell` to lazily create this image. On
-    /// Linux where `memfd_create` may be used to create the backing memory
-    /// image this is a pretty expensive operation, so by deferring it this
-    /// improves memory usage for modules that are created but may not ever be
-    /// instantiated.
-    memory_images: OnceCell<Option<ModuleMemoryImages>>,
-
-    /// Flag indicating whether this module can be serialized or not.
-    serializable: bool,
-
-    /// Runtime offset information for `VMContext`.
-    offsets: VMOffsets<HostPtr>,
-}
-
-impl std::fmt::Debug for Module {
-    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
-        f.debug_struct("Module")
-            .field("name", &self.name())
-            .finish_non_exhaustive()
-    }
-}
-
-impl Module {
-    /// Creates a new WebAssembly `Module` from the given in-memory `bytes`.
-    ///
-    /// The `bytes` provided must be in one of the following formats:
-    ///
-    /// * A [binary-encoded][binary] WebAssembly module. This is always supported.
-    /// * A [text-encoded][text] instance of the WebAssembly text format.
-    ///   This is only supported when the `wat` feature of this crate is enabled.
-    ///   If this is supplied then the text format will be parsed before validation.
-    ///   Note that the `wat` feature is enabled by default.
-    ///
-    /// The data for the wasm module must be loaded in-memory if it's present
-    /// elsewhere, for example on disk. This requires that the entire binary is
-    /// loaded into memory all at once, this API does not support streaming
-    /// compilation of a module.
-    ///
-    /// If the module has not been already been compiled, the WebAssembly binary will
-    /// be decoded and validated. It will also be compiled according to the
-    /// configuration of the provided `engine`.
-    ///
-    /// # Errors
-    ///
-    /// This function may fail and return an error. Errors may include
-    /// situations such as:
-    ///
-    /// * The binary provided could not be decoded because it's not a valid
-    ///   WebAssembly binary
-    /// * The WebAssembly binary may not validate (e.g. contains type errors)
-    /// * Implementation-specific limits were exceeded with a valid binary (for
-    ///   example too many locals)
-    /// * The wasm binary may use features that are not enabled in the
-    ///   configuration of `engine`
-    /// * If the `wat` feature is enabled and the input is text, then it may be
-    ///   rejected if it fails to parse.
-    ///
-    /// The error returned should contain full information about why module
-    /// creation failed if one is returned.
-    ///
-    /// [binary]: https://webassembly.github.io/spec/core/binary/index.html
-    /// [text]: https://webassembly.github.io/spec/core/text/index.html
-    ///
-    /// # Examples
-    ///
-    /// The `new` function can be invoked with a in-memory array of bytes:
-    ///
-    /// ```no_run
-    /// # use wasmtime::*;
-    /// # fn main() -> anyhow::Result<()> {
-    /// # let engine = Engine::default();
-    /// # let wasm_bytes: Vec<u8> = Vec::new();
-    /// let module = Module::new(&engine, &wasm_bytes)?;
-    /// # Ok(())
-    /// # }
-    /// ```
-    ///
-    /// Or you can also pass in a string to be parsed as the wasm text
-    /// format:
-    ///
-    /// ```
-    /// # use wasmtime::*;
-    /// # fn main() -> anyhow::Result<()> {
-    /// # let engine = Engine::default();
-    /// let module = Module::new(&engine, "(module (func))")?;
-    /// # Ok(())
-    /// # }
-    /// ```
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
-    pub fn new(engine: &Engine, bytes: impl AsRef<[u8]>) -> Result<Module> {
-        let bytes = bytes.as_ref();
-        #[cfg(feature = "wat")]
-        let bytes = wat::parse_bytes(bytes)?;
-        Self::from_binary(engine, &bytes)
-    }
-
-    /// Creates a new WebAssembly `Module` from the contents of the given
-    /// `file` on disk.
-    ///
-    /// This is a convenience function that will read the `file` provided and
-    /// pass the bytes to the [`Module::new`] function. For more information
-    /// see [`Module::new`]
-    ///
-    /// # Examples
-    ///
-    /// ```no_run
-    /// # use wasmtime::*;
-    /// # fn main() -> anyhow::Result<()> {
-    /// let engine = Engine::default();
-    /// let module = Module::from_file(&engine, "./path/to/foo.wasm")?;
-    /// # Ok(())
-    /// # }
-    /// ```
-    ///
-    /// The `.wat` text format is also supported:
-    ///
-    /// ```no_run
-    /// # use wasmtime::*;
-    /// # fn main() -> anyhow::Result<()> {
-    /// # let engine = Engine::default();
-    /// let module = Module::from_file(&engine, "./path/to/foo.wat")?;
-    /// # Ok(())
-    /// # }
-    /// ```
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
-    pub fn from_file(engine: &Engine, file: impl AsRef<Path>) -> Result<Module> {
-        let file = file.as_ref();
-        match Self::new(
-            engine,
-            &fs::read(file)
-                .with_context(|| format!("failed to read input file: {}", file.display()))?,
-        ) {
-            Ok(m) => Ok(m),
-            Err(e) => {
-                cfg_if::cfg_if! {
-                    if #[cfg(feature = "wat")] {
-                        let mut e = e.downcast::<wat::Error>()?;
-                        e.set_path(file);
-                        bail!(e)
-                    } else {
-                        Err(e)
-                    }
-                }
-            }
-        }
-    }
-
-    /// Creates a new WebAssembly `Module` from the given in-memory `binary`
-    /// data.
-    ///
-    /// This is similar to [`Module::new`] except that it requires that the
-    /// `binary` input is a WebAssembly binary, the text format is not supported
-    /// by this function. It's generally recommended to use [`Module::new`], but
-    /// if it's required to not support the text format this function can be
-    /// used instead.
-    ///
-    /// # Examples
-    ///
-    /// ```
-    /// # use wasmtime::*;
-    /// # fn main() -> anyhow::Result<()> {
-    /// # let engine = Engine::default();
-    /// let wasm = b"\0asm\x01\0\0\0";
-    /// let module = Module::from_binary(&engine, wasm)?;
-    /// # Ok(())
-    /// # }
-    /// ```
-    ///
-    /// Note that the text format is **not** accepted by this function:
-    ///
-    /// ```
-    /// # use wasmtime::*;
-    /// # fn main() -> anyhow::Result<()> {
-    /// # let engine = Engine::default();
-    /// assert!(Module::from_binary(&engine, b"(module)").is_err());
-    /// # Ok(())
-    /// # }
-    /// ```
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
-    pub fn from_binary(engine: &Engine, binary: &[u8]) -> Result<Module> {
-        engine
-            .check_compatible_with_native_host()
-            .context("compilation settings are not compatible with the native host")?;
-
-        cfg_if::cfg_if! {
-            if #[cfg(feature = "cache")] {
-                let state = (HashedEngineCompileEnv(engine), binary);
-                let (code, info_and_types) = wasmtime_cache::ModuleCacheEntry::new(
-                    "wasmtime",
-                    engine.cache_config(),
-                )
-                .get_data_raw(
-                    &state,
-
-                    // Cache miss, compute the actual artifacts
-                    |(engine, wasm)| -> Result<_> {
-                        let (mmap, info) = Module::build_artifacts(engine.0, wasm)?;
-                        let code = publish_mmap(mmap)?;
-                        Ok((code, info))
-                    },
-
-                    // Implementation of how to serialize artifacts
-                    |(_engine, _wasm), (code, _info_and_types)| {
-                        Some(code.mmap().to_vec())
-                    },
-
-                    // Cache hit, deserialize the provided artifacts
-                    |(engine, _wasm), serialized_bytes| {
-                        let code = engine.0.load_code_bytes(&serialized_bytes, ObjectKind::Module).ok()?;
-                        Some((code, None))
-                    },
-                )?;
-            } else {
-                let (mmap, info_and_types) = Module::build_artifacts(engine, binary)?;
-                let code = publish_mmap(mmap)?;
-            }
-        };
-
-        let info_and_types = info_and_types.map(|(info, types)| (info, types.into()));
-        return Self::from_parts(engine, code, info_and_types);
-
-        fn publish_mmap(mmap: MmapVec) -> Result<Arc<CodeMemory>> {
-            let mut code = CodeMemory::new(mmap)?;
-            code.publish()?;
-            Ok(Arc::new(code))
-        }
-    }
-
-    /// Creates a new WebAssembly `Module` from the contents of the given `file`
-    /// on disk, but with assumptions that the file is from a trusted source.
-    /// The file should be a binary- or text-format WebAssembly module, or a
-    /// precompiled artifact generated by the same version of Wasmtime.
-    ///
-    /// # Unsafety
-    ///
-    /// All of the reasons that [`deserialize`] is `unsafe` apply to this
-    /// function as well. Arbitrary data loaded from a file may trick Wasmtime
-    /// into arbitrary code execution since the contents of the file are not
-    /// validated to be a valid precompiled module.
-    ///
-    /// [`deserialize`]: Module::deserialize
-    ///
-    /// Additionally though this function is also `unsafe` because the file
-    /// referenced must remain unchanged and a valid precompiled module for the
-    /// entire lifetime of the [`Module`] returned. Any changes to the file on
-    /// disk may change future instantiations of the module to be incorrect.
-    /// This is because the file is mapped into memory and lazily loaded pages
-    /// reflect the current state of the file, not necessarily the origianl
-    /// state of the file.
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
-    pub unsafe fn from_trusted_file(engine: &Engine, file: impl AsRef<Path>) -> Result<Module> {
-        let mmap = MmapVec::from_file(file.as_ref())?;
-        if &mmap[0..4] == b"\x7fELF" {
-            let code = engine.load_code(mmap, ObjectKind::Module)?;
-            return Module::from_parts(engine, code, None);
-        }
-
-        Module::new(engine, &*mmap)
-    }
-
-    /// Converts an input binary-encoded WebAssembly module to compilation
-    /// artifacts and type information.
-    ///
-    /// This is where compilation actually happens of WebAssembly modules and
-    /// translation/parsing/validation of the binary input occurs. The binary
-    /// artifact represented in the `MmapVec` returned here is an in-memory ELF
-    /// file in an owned area of virtual linear memory where permissions (such
-    /// as the executable bit) can be applied.
-    ///
-    /// Additionally compilation returns an `Option` here which is always
-    /// `Some`, notably compiled metadata about the module in addition to the
-    /// type information found within.
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    pub(crate) fn build_artifacts(
-        engine: &Engine,
-        wasm: &[u8],
-    ) -> Result<(MmapVec, Option<(CompiledModuleInfo, ModuleTypes)>)> {
-        use crate::compiler::CompileInputs;
-
-        let tunables = &engine.config().tunables;
-
-        // First a `ModuleEnvironment` is created which records type information
-        // about the wasm module. This is where the WebAssembly is parsed and
-        // validated. Afterwards `types` will have all the type information for
-        // this module.
-        let mut validator =
-            wasmparser::Validator::new_with_features(engine.config().features.clone());
-        let parser = wasmparser::Parser::new(0);
-        let mut types = Default::default();
-        let mut translation = ModuleEnvironment::new(tunables, &mut validator, &mut types)
-            .translate(parser, wasm)
-            .context("failed to parse WebAssembly module")?;
-        let functions = mem::take(&mut translation.function_body_inputs);
-        let types = types.finish();
-
-        let compile_inputs = CompileInputs::for_module(&types, &translation, functions);
-        let unlinked_compile_outputs = compile_inputs.compile(engine)?;
-        let (compiled_funcs, function_indices) = unlinked_compile_outputs.pre_link();
-
-        // Emplace all compiled functions into the object file with any other
-        // sections associated with code as well.
-        let mut object = engine.compiler().object(ObjectKind::Module)?;
-        // Insert `Engine` and type-level information into the compiled
-        // artifact so if this module is deserialized later it contains all
-        // information necessary.
-        //
-        // Note that `append_compiler_info` and `append_types` here in theory
-        // can both be skipped if this module will never get serialized.
-        // They're only used during deserialization and not during runtime for
-        // the module itself. Currently there's no need for that, however, so
-        // it's left as an exercise for later.
-        engine.append_compiler_info(&mut object);
-        engine.append_bti(&mut object);
-
-        let (mut object, compilation_artifacts) = function_indices.link_and_append_code(
-            object,
-            engine,
-            compiled_funcs,
-            std::iter::once(translation).collect(),
-        )?;
-
-        let info = compilation_artifacts.unwrap_as_module_info();
-        object.serialize_info(&(&info, &types));
-        let mmap = object.finish()?;
-
-        Ok((mmap, Some((info, types))))
-    }
-
-    /// Deserializes an in-memory compiled module previously created with
-    /// [`Module::serialize`] or [`Engine::precompile_module`].
-    ///
-    /// This function will deserialize the binary blobs emitted by
-    /// [`Module::serialize`] and [`Engine::precompile_module`] back into an
-    /// in-memory [`Module`] that's ready to be instantiated.
-    ///
-    /// Note that the [`Module::deserialize_file`] method is more optimized than
-    /// this function, so if the serialized module is already present in a file
-    /// it's recommended to use that method instead.
-    ///
-    /// # Unsafety
-    ///
-    /// This function is marked as `unsafe` because if fed invalid input or used
-    /// improperly this could lead to memory safety vulnerabilities. This method
-    /// should not, for example, be exposed to arbitrary user input.
-    ///
-    /// The structure of the binary blob read here is only lightly validated
-    /// internally in `wasmtime`. This is intended to be an efficient
-    /// "rehydration" for a [`Module`] which has very few runtime checks beyond
-    /// deserialization. Arbitrary input could, for example, replace valid
-    /// compiled code with any other valid compiled code, meaning that this can
-    /// trivially be used to execute arbitrary code otherwise.
-    ///
-    /// For these reasons this function is `unsafe`. This function is only
-    /// designed to receive the previous input from [`Module::serialize`] and
-    /// [`Engine::precompile_module`]. If the exact output of those functions
-    /// (unmodified) is passed to this function then calls to this function can
-    /// be considered safe. It is the caller's responsibility to provide the
-    /// guarantee that only previously-serialized bytes are being passed in
-    /// here.
-    ///
-    /// Note that this function is designed to be safe receiving output from
-    /// *any* compiled version of `wasmtime` itself. This means that it is safe
-    /// to feed output from older versions of Wasmtime into this function, in
-    /// addition to newer versions of wasmtime (from the future!). These inputs
-    /// will deterministically and safely produce an `Err`. This function only
-    /// successfully accepts inputs from the same version of `wasmtime`, but the
-    /// safety guarantee only applies to externally-defined blobs of bytes, not
-    /// those defined by any version of wasmtime. (this means that if you cache
-    /// blobs across versions of wasmtime you can be safely guaranteed that
-    /// future versions of wasmtime will reject old cache entries).
-    pub unsafe fn deserialize(engine: &Engine, bytes: impl AsRef<[u8]>) -> Result<Module> {
-        let code = engine.load_code_bytes(bytes.as_ref(), ObjectKind::Module)?;
-        Module::from_parts(engine, code, None)
-    }
-
-    /// Same as [`deserialize`], except that the contents of `path` are read to
-    /// deserialize into a [`Module`].
-    ///
-    /// This method is provided because it can be faster than [`deserialize`]
-    /// since the data doesn't need to be copied around, but rather the module
-    /// can be used directly from an mmap'd view of the file provided.
-    ///
-    /// [`deserialize`]: Module::deserialize
-    ///
-    /// # Unsafety
-    ///
-    /// All of the reasons that [`deserialize`] is `unsafe` applies to this
-    /// function as well. Arbitrary data loaded from a file may trick Wasmtime
-    /// into arbitrary code execution since the contents of the file are not
-    /// validated to be a valid precompiled module.
-    ///
-    /// Additionally though this function is also `unsafe` because the file
-    /// referenced must remain unchanged and a valid precompiled module for the
-    /// entire lifetime of the [`Module`] returned. Any changes to the file on
-    /// disk may change future instantiations of the module to be incorrect.
-    /// This is because the file is mapped into memory and lazily loaded pages
-    /// reflect the current state of the file, not necessarily the origianl
-    /// state of the file.
-    pub unsafe fn deserialize_file(engine: &Engine, path: impl AsRef<Path>) -> Result<Module> {
-        let code = engine.load_code_file(path.as_ref(), ObjectKind::Module)?;
-        Module::from_parts(engine, code, None)
-    }
-
-    /// Entrypoint for creating a `Module` for all above functions, both
-    /// of the AOT and jit-compiled cateogries.
-    ///
-    /// In all cases the compilation artifact, `code_memory`, is provided here.
-    /// The `info_and_types` argument is `None` when a module is being
-    /// deserialized from a precompiled artifact or it's `Some` if it was just
-    /// compiled and the values are already available.
-    fn from_parts(
-        engine: &Engine,
-        code_memory: Arc<CodeMemory>,
-        info_and_types: Option<(CompiledModuleInfo, ModuleTypes)>,
-    ) -> Result<Self> {
-        // Acquire this module's metadata and type information, deserializing
-        // it from the provided artifact if it wasn't otherwise provided
-        // already.
-        let (info, types) = match info_and_types {
-            Some((info, types)) => (info, types),
-            None => bincode::deserialize(code_memory.wasmtime_info())?,
-        };
-
-        // Register function type signatures into the engine for the lifetime
-        // of the `Module` that will be returned. This notably also builds up
-        // maps for trampolines to be used for this module when inserted into
-        // stores.
-        //
-        // Note that the unsafety here should be ok since the `trampolines`
-        // field should only point to valid trampoline function pointers
-        // within the text section.
-        let signatures = SignatureCollection::new_for_module(engine.signatures(), &types);
-
-        // Package up all our data into a `CodeObject` and delegate to the final
-        // step of module compilation.
-        let code = Arc::new(CodeObject::new(code_memory, signatures, types.into()));
-        Module::from_parts_raw(engine, code, info, true)
-    }
-
-    pub(crate) fn from_parts_raw(
-        engine: &Engine,
-        code: Arc<CodeObject>,
-        info: CompiledModuleInfo,
-        serializable: bool,
-    ) -> Result<Self> {
-        let module = CompiledModule::from_artifacts(
-            code.code_memory().clone(),
-            info,
-            engine.profiler(),
-            engine.unique_id_allocator(),
-        )?;
-
-        // Validate the module can be used with the current instance allocator.
-        let offsets = VMOffsets::new(HostPtr, module.module());
-        engine
-            .allocator()
-            .validate_module(module.module(), &offsets)?;
-
-        Ok(Self {
-            inner: Arc::new(ModuleInner {
-                engine: engine.clone(),
-                code,
-                memory_images: OnceCell::new(),
-                module,
-                serializable,
-                offsets,
-            }),
-        })
-    }
-
-    /// Validates `binary` input data as a WebAssembly binary given the
-    /// configuration in `engine`.
-    ///
-    /// This function will perform a speedy validation of the `binary` input
-    /// WebAssembly module (which is in [binary form][binary], the text format
-    /// is not accepted by this function) and return either `Ok` or `Err`
-    /// depending on the results of validation. The `engine` argument indicates
-    /// configuration for WebAssembly features, for example, which are used to
-    /// indicate what should be valid and what shouldn't be.
-    ///
-    /// Validation automatically happens as part of [`Module::new`].
-    ///
-    /// # Errors
-    ///
-    /// If validation fails for any reason (type check error, usage of a feature
-    /// that wasn't enabled, etc) then an error with a description of the
-    /// validation issue will be returned.
-    ///
-    /// [binary]: https://webassembly.github.io/spec/core/binary/index.html
-    pub fn validate(engine: &Engine, binary: &[u8]) -> Result<()> {
-        let mut validator = Validator::new_with_features(engine.config().features);
-
-        let mut functions = Vec::new();
-        for payload in Parser::new(0).parse_all(binary) {
-            let payload = payload?;
-            if let ValidPayload::Func(a, b) = validator.payload(&payload)? {
-                functions.push((a, b));
-            }
-            if let wasmparser::Payload::Version { encoding, .. } = &payload {
-                if let wasmparser::Encoding::Component = encoding {
-                    bail!("component passed to module validation");
-                }
-            }
-        }
-
-        engine.run_maybe_parallel(functions, |(validator, body)| {
-            // FIXME: it would be best here to use a rayon-specific parallel
-            // iterator that maintains state-per-thread to share the function
-            // validator allocations (`Default::default` here) across multiple
-            // functions.
-            validator.into_validator(Default::default()).validate(&body)
-        })?;
-        Ok(())
-    }
-
-    /// Serializes this module to a vector of bytes.
-    ///
-    /// This function is similar to the [`Engine::precompile_module`] method
-    /// where it produces an artifact of Wasmtime which is suitable to later
-    /// pass into [`Module::deserialize`]. If a module is never instantiated
-    /// then it's recommended to use [`Engine::precompile_module`] instead of
-    /// this method, but if a module is both instantiated and serialized then
-    /// this method can be useful to get the serialized version without
-    /// compiling twice.
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
-    pub fn serialize(&self) -> Result<Vec<u8>> {
-        // The current representation of compiled modules within a compiled
-        // component means that it cannot be serialized. The mmap returned here
-        // is the mmap for the entire component and while it contains all
-        // necessary data to deserialize this particular module it's all
-        // embedded within component-specific information.
-        //
-        // It's not the hardest thing in the world to support this but it's
-        // expected that there's not much of a use case at this time. In theory
-        // all that needs to be done is to edit the `.wasmtime.info` section
-        // to contains this module's metadata instead of the metadata for the
-        // whole component. The metadata itself is fairly trivially
-        // recreateable here it's more that there's no easy one-off API for
-        // editing the sections of an ELF object to use here.
-        //
-        // Overall for now this simply always returns an error in this
-        // situation. If you're reading this and feel that the situation should
-        // be different please feel free to open an issue.
-        if !self.inner.serializable {
-            bail!("cannot serialize a module exported from a component");
-        }
-        Ok(self.compiled_module().mmap().to_vec())
-    }
-
-    pub(crate) fn compiled_module(&self) -> &CompiledModule {
-        &self.inner.module
-    }
-
-    fn code_object(&self) -> &Arc<CodeObject> {
-        &self.inner.code
-    }
-
-    pub(crate) fn env_module(&self) -> &wasmtime_environ::Module {
-        self.compiled_module().module()
-    }
-
-    pub(crate) fn types(&self) -> &ModuleTypes {
-        self.inner.code.module_types()
-    }
-
-    pub(crate) fn signatures(&self) -> &SignatureCollection {
-        self.inner.code.signatures()
-    }
-
-    /// Returns identifier/name that this [`Module`] has. This name
-    /// is used in traps/backtrace details.
-    ///
-    /// Note that most LLVM/clang/Rust-produced modules do not have a name
-    /// associated with them, but other wasm tooling can be used to inject or
-    /// add a name.
-    ///
-    /// # Examples
-    ///
-    /// ```
-    /// # use wasmtime::*;
-    /// # fn main() -> anyhow::Result<()> {
-    /// # let engine = Engine::default();
-    /// let module = Module::new(&engine, "(module $foo)")?;
-    /// assert_eq!(module.name(), Some("foo"));
-    ///
-    /// let module = Module::new(&engine, "(module)")?;
-    /// assert_eq!(module.name(), None);
-    ///
-    /// # Ok(())
-    /// # }
-    /// ```
-    pub fn name(&self) -> Option<&str> {
-        self.compiled_module().module().name.as_deref()
-    }
-
-    /// Returns the list of imports that this [`Module`] has and must be
-    /// satisfied.
-    ///
-    /// This function returns the list of imports that the wasm module has, but
-    /// only the types of each import. The type of each import is used to
-    /// typecheck the [`Instance::new`](crate::Instance::new) method's `imports`
-    /// argument. The arguments to that function must match up 1-to-1 with the
-    /// entries in the array returned here.
-    ///
-    /// The imports returned reflect the order of the imports in the wasm module
-    /// itself, and note that no form of deduplication happens.
-    ///
-    /// # Examples
-    ///
-    /// Modules with no imports return an empty list here:
-    ///
-    /// ```
-    /// # use wasmtime::*;
-    /// # fn main() -> anyhow::Result<()> {
-    /// # let engine = Engine::default();
-    /// let module = Module::new(&engine, "(module)")?;
-    /// assert_eq!(module.imports().len(), 0);
-    /// # Ok(())
-    /// # }
-    /// ```
-    ///
-    /// and modules with imports will have a non-empty list:
-    ///
-    /// ```
-    /// # use wasmtime::*;
-    /// # fn main() -> anyhow::Result<()> {
-    /// # let engine = Engine::default();
-    /// let wat = r#"
-    ///     (module
-    ///         (import "host" "foo" (func))
-    ///     )
-    /// "#;
-    /// let module = Module::new(&engine, wat)?;
-    /// assert_eq!(module.imports().len(), 1);
-    /// let import = module.imports().next().unwrap();
-    /// assert_eq!(import.module(), "host");
-    /// assert_eq!(import.name(), "foo");
-    /// match import.ty() {
-    ///     ExternType::Func(_) => { /* ... */ }
-    ///     _ => panic!("unexpected import type!"),
-    /// }
-    /// # Ok(())
-    /// # }
-    /// ```
-    pub fn imports<'module>(
-        &'module self,
-    ) -> impl ExactSizeIterator<Item = ImportType<'module>> + 'module {
-        let module = self.compiled_module().module();
-        let types = self.types();
-        module
-            .imports()
-            .map(move |(module, field, ty)| ImportType::new(module, field, ty, types))
-            .collect::<Vec<_>>()
-            .into_iter()
-    }
-
-    /// Returns the list of exports that this [`Module`] has and will be
-    /// available after instantiation.
-    ///
-    /// This function will return the type of each item that will be returned
-    /// from [`Instance::exports`](crate::Instance::exports). Each entry in this
-    /// list corresponds 1-to-1 with that list, and the entries here will
-    /// indicate the name of the export along with the type of the export.
-    ///
-    /// # Examples
-    ///
-    /// Modules might not have any exports:
-    ///
-    /// ```
-    /// # use wasmtime::*;
-    /// # fn main() -> anyhow::Result<()> {
-    /// # let engine = Engine::default();
-    /// let module = Module::new(&engine, "(module)")?;
-    /// assert!(module.exports().next().is_none());
-    /// # Ok(())
-    /// # }
-    /// ```
-    ///
-    /// When the exports are not empty, you can inspect each export:
-    ///
-    /// ```
-    /// # use wasmtime::*;
-    /// # fn main() -> anyhow::Result<()> {
-    /// # let engine = Engine::default();
-    /// let wat = r#"
-    ///     (module
-    ///         (func (export "foo"))
-    ///         (memory (export "memory") 1)
-    ///     )
-    /// "#;
-    /// let module = Module::new(&engine, wat)?;
-    /// assert_eq!(module.exports().len(), 2);
-    ///
-    /// let mut exports = module.exports();
-    /// let foo = exports.next().unwrap();
-    /// assert_eq!(foo.name(), "foo");
-    /// match foo.ty() {
-    ///     ExternType::Func(_) => { /* ... */ }
-    ///     _ => panic!("unexpected export type!"),
-    /// }
-    ///
-    /// let memory = exports.next().unwrap();
-    /// assert_eq!(memory.name(), "memory");
-    /// match memory.ty() {
-    ///     ExternType::Memory(_) => { /* ... */ }
-    ///     _ => panic!("unexpected export type!"),
-    /// }
-    /// # Ok(())
-    /// # }
-    /// ```
-    pub fn exports<'module>(
-        &'module self,
-    ) -> impl ExactSizeIterator<Item = ExportType<'module>> + 'module {
-        let module = self.compiled_module().module();
-        let types = self.types();
-        module.exports.iter().map(move |(name, entity_index)| {
-            ExportType::new(name, module.type_of(*entity_index), types)
-        })
-    }
-
-    /// Looks up an export in this [`Module`] by name.
-    ///
-    /// This function will return the type of an export with the given name.
-    ///
-    /// # Examples
-    ///
-    /// There may be no export with that name:
-    ///
-    /// ```
-    /// # use wasmtime::*;
-    /// # fn main() -> anyhow::Result<()> {
-    /// # let engine = Engine::default();
-    /// let module = Module::new(&engine, "(module)")?;
-    /// assert!(module.get_export("foo").is_none());
-    /// # Ok(())
-    /// # }
-    /// ```
-    ///
-    /// When there is an export with that name, it is returned:
-    ///
-    /// ```
-    /// # use wasmtime::*;
-    /// # fn main() -> anyhow::Result<()> {
-    /// # let engine = Engine::default();
-    /// let wat = r#"
-    ///     (module
-    ///         (func (export "foo"))
-    ///         (memory (export "memory") 1)
-    ///     )
-    /// "#;
-    /// let module = Module::new(&engine, wat)?;
-    /// let foo = module.get_export("foo");
-    /// assert!(foo.is_some());
-    ///
-    /// let foo = foo.unwrap();
-    /// match foo {
-    ///     ExternType::Func(_) => { /* ... */ }
-    ///     _ => panic!("unexpected export type!"),
-    /// }
-    ///
-    /// # Ok(())
-    /// # }
-    /// ```
-    pub fn get_export(&self, name: &str) -> Option<ExternType> {
-        let module = self.compiled_module().module();
-        let entity_index = module.exports.get(name)?;
-        Some(ExternType::from_wasmtime(
-            self.types(),
-            &module.type_of(*entity_index),
-        ))
-    }
-
-    /// Returns the [`Engine`] that this [`Module`] was compiled by.
-    pub fn engine(&self) -> &Engine {
-        &self.inner.engine
-    }
-
-    /// Returns a summary of the resources required to instantiate this
-    /// [`Module`].
-    ///
-    /// Potential uses of the returned information:
-    ///
-    /// * Determining whether your pooling allocator configuration supports
-    ///   instantiating this module.
-    ///
-    /// * Deciding how many of which `Module` you want to instantiate within a
-    ///   fixed amount of resources, e.g. determining whether to create 5
-    ///   instances of module X or 10 instances of module Y.
-    ///
-    /// # Example
-    ///
-    /// ```
-    /// # fn main() -> wasmtime::Result<()> {
-    /// use wasmtime::{Config, Engine, Module};
-    ///
-    /// let mut config = Config::new();
-    /// config.wasm_multi_memory(true);
-    /// let engine = Engine::new(&config)?;
-    ///
-    /// let module = Module::new(&engine, r#"
-    ///     (module
-    ///         ;; Import a memory. Doesn't count towards required resources.
-    ///         (import "a" "b" (memory 10))
-    ///         ;; Define two local memories. These count towards the required
-    ///         ;; resources.
-    ///         (memory 1)
-    ///         (memory 6)
-    ///     )
-    /// "#)?;
-    ///
-    /// let resources = module.resources_required();
-    ///
-    /// // Instantiating the module will require allocating two memories, and
-    /// // the maximum initial memory size is six Wasm pages.
-    /// assert_eq!(resources.num_memories, 2);
-    /// assert_eq!(resources.max_initial_memory_size, Some(6));
-    ///
-    /// // The module doesn't need any tables.
-    /// assert_eq!(resources.num_tables, 0);
-    /// assert_eq!(resources.max_initial_table_size, None);
-    /// # Ok(()) }
-    /// ```
-    pub fn resources_required(&self) -> ResourcesRequired {
-        let em = self.env_module();
-        let num_memories = u32::try_from(em.memory_plans.len() - em.num_imported_memories).unwrap();
-        let max_initial_memory_size = em
-            .memory_plans
-            .values()
-            .skip(em.num_imported_memories)
-            .map(|plan| plan.memory.minimum)
-            .max();
-        let num_tables = u32::try_from(em.table_plans.len() - em.num_imported_tables).unwrap();
-        let max_initial_table_size = em
-            .table_plans
-            .values()
-            .skip(em.num_imported_tables)
-            .map(|plan| plan.table.minimum)
-            .max();
-        ResourcesRequired {
-            num_memories,
-            max_initial_memory_size,
-            num_tables,
-            max_initial_table_size,
-        }
-    }
-
-    /// Returns the `ModuleInner` cast as `ModuleRuntimeInfo` for use
-    /// by the runtime.
-    pub(crate) fn runtime_info(&self) -> Arc<dyn wasmtime_runtime::ModuleRuntimeInfo> {
-        // N.B.: this needs to return a clone because we cannot
-        // statically cast the &Arc<ModuleInner> to &Arc<dyn Trait...>.
-        self.inner.clone()
-    }
-
-    pub(crate) fn module_info(&self) -> &dyn wasmtime_runtime::ModuleInfo {
-        &*self.inner
-    }
-
-    /// Returns the range of bytes in memory where this module's compilation
-    /// image resides.
-    ///
-    /// The compilation image for a module contains executable code, data, debug
-    /// information, etc. This is roughly the same as the `Module::serialize`
-    /// but not the exact same.
-    ///
-    /// The range of memory reported here is exposed to allow low-level
-    /// manipulation of the memory in platform-specific manners such as using
-    /// `mlock` to force the contents to be paged in immediately or keep them
-    /// paged in after they're loaded.
-    ///
-    /// It is not safe to modify the memory in this range, nor is it safe to
-    /// modify the protections of memory in this range.
-    pub fn image_range(&self) -> Range<usize> {
-        self.compiled_module().image_range()
-    }
-
-    /// Force initialization of copy-on-write images to happen here-and-now
-    /// instead of when they're requested during first instantiation.
-    ///
-    /// When [copy-on-write memory
-    /// initialization](crate::Config::memory_init_cow) is enabled then Wasmtime
-    /// will lazily create the initialization image for a module. This method
-    /// can be used to explicitly dictate when this initialization happens.
-    ///
-    /// Note that this largely only matters on Linux when memfd is used.
-    /// Otherwise the copy-on-write image typically comes from disk and in that
-    /// situation the creation of the image is trivial as the image is always
-    /// sourced from disk. On Linux, though, when memfd is used a memfd is
-    /// created and the initialization image is written to it.
-    ///
-    /// Also note that this method is not required to be called, it's available
-    /// as a performance optimization if required but is otherwise handled
-    /// automatically.
-    pub fn initialize_copy_on_write_image(&self) -> Result<()> {
-        self.inner.memory_images()?;
-        Ok(())
-    }
-
-    /// Get the map from `.text` section offsets to Wasm binary offsets for this
-    /// module.
-    ///
-    /// Each entry is a (`.text` section offset, Wasm binary offset) pair.
-    ///
-    /// Entries are yielded in order of `.text` section offset.
-    ///
-    /// Some entries are missing a Wasm binary offset. This is for code that is
-    /// not associated with any single location in the Wasm binary, or for when
-    /// source information was optimized away.
-    ///
-    /// Not every module has an address map, since address map generation can be
-    /// turned off on `Config`.
-    ///
-    /// There is not an entry for every `.text` section offset. Every offset
-    /// after an entry's offset, but before the next entry's offset, is
-    /// considered to map to the same Wasm binary offset as the original
-    /// entry. For example, the address map will not contain the following
-    /// sequnce of entries:
-    ///
-    /// ```ignore
-    /// [
-    ///     // ...
-    ///     (10, Some(42)),
-    ///     (11, Some(42)),
-    ///     (12, Some(42)),
-    ///     (13, Some(43)),
-    ///     // ...
-    /// ]
-    /// ```
-    ///
-    /// Instead, it will drop the entries for offsets `11` and `12` since they
-    /// are the same as the entry for offset `10`:
-    ///
-    /// ```ignore
-    /// [
-    ///     // ...
-    ///     (10, Some(42)),
-    ///     (13, Some(43)),
-    ///     // ...
-    /// ]
-    /// ```
-    pub fn address_map<'a>(&'a self) -> Option<impl Iterator<Item = (usize, Option<u32>)> + 'a> {
-        Some(
-            wasmtime_environ::iterate_address_map(
-                self.code_object().code_memory().address_map_data(),
-            )?
-            .map(|(offset, file_pos)| (offset as usize, file_pos.file_offset())),
-        )
-    }
-
-    /// Get this module's code object's `.text` section, containing its compiled
-    /// executable code.
-    pub fn text(&self) -> &[u8] {
-        self.code_object().code_memory().text()
-    }
-
-    /// Get the locations of functions in this module's `.text` section.
-    ///
-    /// Each function's locartion is a (`.text` section offset, length) pair.
-    pub fn function_locations<'a>(&'a self) -> impl ExactSizeIterator<Item = (usize, usize)> + 'a {
-        self.compiled_module().finished_functions().map(|(f, _)| {
-            let loc = self.compiled_module().func_loc(f);
-            (loc.start as usize, loc.length as usize)
-        })
-    }
-
-    pub(crate) fn id(&self) -> CompiledModuleId {
-        self.inner.module.unique_id()
-    }
-}
-
-impl ModuleInner {
-    fn memory_images(&self) -> Result<Option<&ModuleMemoryImages>> {
-        let images = self
-            .memory_images
-            .get_or_try_init(|| memory_images(&self.engine, &self.module))?
-            .as_ref();
-        Ok(images)
-    }
-}
-
-impl Drop for ModuleInner {
-    fn drop(&mut self) {
-        // When a `Module` is being dropped that means that it's no longer
-        // present in any `Store` and it's additionally not longer held by any
-        // embedder. Take this opportunity to purge any lingering instantiations
-        // within a pooling instance allocator, if applicable.
-        self.engine
-            .allocator()
-            .purge_module(self.module.unique_id());
-    }
-}
-
-fn _assert_send_sync() {
-    fn _assert<T: Send + Sync>() {}
-    _assert::<Module>();
-}
-
-/// This is a helper struct used when caching to hash the state of an `Engine`
-/// used for module compilation.
-///
-/// The hash computed for this structure is used to key the global wasmtime
-/// cache and dictates whether artifacts are reused. Consequently the contents
-/// of this hash dictate when artifacts are or aren't re-used.
-#[cfg(any(feature = "cranelift", feature = "winch"))]
-pub(crate) struct HashedEngineCompileEnv<'a>(pub &'a Engine);
-
-#[cfg(any(feature = "cranelift", feature = "winch"))]
-impl std::hash::Hash for HashedEngineCompileEnv<'_> {
-    fn hash<H: std::hash::Hasher>(&self, hasher: &mut H) {
-        // Hash the compiler's state based on its target and configuration.
-        let compiler = self.0.compiler();
-        compiler.triple().hash(hasher);
-        compiler.flags().hash(hasher);
-        compiler.isa_flags().hash(hasher);
-
-        // Hash configuration state read for compilation
-        let config = self.0.config();
-        config.tunables.hash(hasher);
-        config.features.hash(hasher);
-        config.wmemcheck.hash(hasher);
-
-        // Catch accidental bugs of reusing across crate versions.
-        config.module_version.hash(hasher);
-    }
-}
-
-impl wasmtime_runtime::ModuleRuntimeInfo for ModuleInner {
-    fn module(&self) -> &Arc<wasmtime_environ::Module> {
-        self.module.module()
-    }
-
-    fn function(&self, index: DefinedFuncIndex) -> NonNull<VMWasmCallFunction> {
-        let ptr = self
-            .module
-            .finished_function(index)
-            .as_ptr()
-            .cast::<VMWasmCallFunction>()
-            .cast_mut();
-        NonNull::new(ptr).unwrap()
-    }
-
-    fn native_to_wasm_trampoline(
-        &self,
-        index: DefinedFuncIndex,
-    ) -> Option<NonNull<VMNativeCallFunction>> {
-        let ptr = self
-            .module
-            .native_to_wasm_trampoline(index)?
-            .as_ptr()
-            .cast::<VMNativeCallFunction>()
-            .cast_mut();
-        Some(NonNull::new(ptr).unwrap())
-    }
-
-    fn array_to_wasm_trampoline(&self, index: DefinedFuncIndex) -> Option<VMArrayCallFunction> {
-        let ptr = self.module.array_to_wasm_trampoline(index)?.as_ptr();
-        Some(unsafe { mem::transmute::<*const u8, VMArrayCallFunction>(ptr) })
-    }
-
-    fn wasm_to_native_trampoline(
-        &self,
-        signature: VMSharedSignatureIndex,
-    ) -> Option<NonNull<VMWasmCallFunction>> {
-        let sig = self.code.signatures().local_signature(signature)?;
-        let ptr = self
-            .module
-            .wasm_to_native_trampoline(sig)
-            .as_ptr()
-            .cast::<VMWasmCallFunction>()
-            .cast_mut();
-        Some(NonNull::new(ptr).unwrap())
-    }
-
-    fn memory_image(&self, memory: DefinedMemoryIndex) -> Result<Option<&Arc<MemoryImage>>> {
-        let images = self.memory_images()?;
-        Ok(images.and_then(|images| images.get_memory_image(memory)))
-    }
-
-    fn unique_id(&self) -> Option<CompiledModuleId> {
-        Some(self.module.unique_id())
-    }
-
-    fn wasm_data(&self) -> &[u8] {
-        self.module.code_memory().wasm_data()
-    }
-
-    fn signature_ids(&self) -> &[VMSharedSignatureIndex] {
-        self.code.signatures().as_module_map().values().as_slice()
-    }
-
-    fn offsets(&self) -> &VMOffsets<HostPtr> {
-        &self.offsets
-    }
-}
-
-impl wasmtime_runtime::ModuleInfo for ModuleInner {
-    fn lookup_stack_map(&self, pc: usize) -> Option<&wasmtime_environ::StackMap> {
-        let text_offset = pc - self.module.text().as_ptr() as usize;
-        let (index, func_offset) = self.module.func_by_text_offset(text_offset)?;
-        let info = self.module.wasm_func_info(index);
-
-        // Do a binary search to find the stack map for the given offset.
-        let index = match info
-            .stack_maps
-            .binary_search_by_key(&func_offset, |i| i.code_offset)
-        {
-            // Found it.
-            Ok(i) => i,
-
-            // No stack map associated with this PC.
-            //
-            // Because we know we are in Wasm code, and we must be at some kind
-            // of call/safepoint, then the Cranelift backend must have avoided
-            // emitting a stack map for this location because no refs were live.
-            Err(_) => return None,
-        };
-
-        Some(&info.stack_maps[index].stack_map)
-    }
-}
-
-/// A barebones implementation of ModuleRuntimeInfo that is useful for
-/// cases where a purpose-built environ::Module is used and a full
-/// CompiledModule does not exist (for example, for tests or for the
-/// default-callee instance).
-pub(crate) struct BareModuleInfo {
-    module: Arc<wasmtime_environ::Module>,
-    one_signature: Option<VMSharedSignatureIndex>,
-    offsets: VMOffsets<HostPtr>,
-}
-
-impl BareModuleInfo {
-    pub(crate) fn empty(module: Arc<wasmtime_environ::Module>) -> Self {
-        BareModuleInfo::maybe_imported_func(module, None)
-    }
-
-    pub(crate) fn maybe_imported_func(
-        module: Arc<wasmtime_environ::Module>,
-        one_signature: Option<VMSharedSignatureIndex>,
-    ) -> Self {
-        BareModuleInfo {
-            offsets: VMOffsets::new(HostPtr, &module),
-            module,
-            one_signature,
-        }
-    }
-
-    pub(crate) fn into_traitobj(self) -> Arc<dyn wasmtime_runtime::ModuleRuntimeInfo> {
-        Arc::new(self)
-    }
-}
-
-impl wasmtime_runtime::ModuleRuntimeInfo for BareModuleInfo {
-    fn module(&self) -> &Arc<wasmtime_environ::Module> {
-        &self.module
-    }
-
-    fn function(&self, _index: DefinedFuncIndex) -> NonNull<VMWasmCallFunction> {
-        unreachable!()
-    }
-
-    fn array_to_wasm_trampoline(&self, _index: DefinedFuncIndex) -> Option<VMArrayCallFunction> {
-        unreachable!()
-    }
-
-    fn native_to_wasm_trampoline(
-        &self,
-        _index: DefinedFuncIndex,
-    ) -> Option<NonNull<VMNativeCallFunction>> {
-        unreachable!()
-    }
-
-    fn wasm_to_native_trampoline(
-        &self,
-        _signature: VMSharedSignatureIndex,
-    ) -> Option<NonNull<VMWasmCallFunction>> {
-        unreachable!()
-    }
-
-    fn memory_image(&self, _memory: DefinedMemoryIndex) -> Result<Option<&Arc<MemoryImage>>> {
-        Ok(None)
-    }
-
-    fn unique_id(&self) -> Option<CompiledModuleId> {
-        None
-    }
-
-    fn wasm_data(&self) -> &[u8] {
-        &[]
-    }
-
-    fn signature_ids(&self) -> &[VMSharedSignatureIndex] {
-        match &self.one_signature {
-            Some(id) => std::slice::from_ref(id),
-            None => &[],
-        }
-    }
-
-    fn offsets(&self) -> &VMOffsets<HostPtr> {
-        &self.offsets
-    }
-}
-
-/// Helper method to construct a `ModuleMemoryImages` for an associated
-/// `CompiledModule`.
-fn memory_images(engine: &Engine, module: &CompiledModule) -> Result<Option<ModuleMemoryImages>> {
-    // If initialization via copy-on-write is explicitly disabled in
-    // configuration then this path is skipped entirely.
-    if !engine.config().memory_init_cow {
-        return Ok(None);
-    }
-
-    // ... otherwise logic is delegated to the `ModuleMemoryImages::new`
-    // constructor.
-    let mmap = if engine.config().force_memory_init_memfd {
-        None
-    } else {
-        Some(module.mmap())
-    };
-    ModuleMemoryImages::new(module.module(), module.code_memory().wasm_data(), mmap)
-}
-
-#[cfg(test)]
-mod tests {
-    use crate::{Engine, Module};
-    use wasmtime_environ::MemoryInitialization;
-
-    #[test]
-    fn cow_on_by_default() {
-        let engine = Engine::default();
-        let module = Module::new(
-            &engine,
-            r#"
-                (module
-                    (memory 1)
-                    (data (i32.const 100) "abcd")
-                )
-            "#,
-        )
-        .unwrap();
-
-        let init = &module.env_module().memory_initialization;
-        assert!(matches!(init, MemoryInitialization::Static { .. }));
-    }
-}