wasmtime 15.0.1 → 16.0.0

data/ext/cargo-vendor/wasmtime-runtime-15.0.1/src/traphandlers/unix.rs

@@ -1,402 +0,0 @@
-use crate::traphandlers::{tls, wasmtime_longjmp};
-use std::cell::RefCell;
-use std::io;
-use std::mem::{self, MaybeUninit};
-use std::ptr::{self, null_mut};
-
-/// Function which may handle custom signals while processing traps.
-pub type SignalHandler<'a> =
-    dyn Fn(libc::c_int, *const libc::siginfo_t, *const libc::c_void) -> bool + Send + Sync + 'a;
-
-static mut PREV_SIGSEGV: MaybeUninit<libc::sigaction> = MaybeUninit::uninit();
-static mut PREV_SIGBUS: MaybeUninit<libc::sigaction> = MaybeUninit::uninit();
-static mut PREV_SIGILL: MaybeUninit<libc::sigaction> = MaybeUninit::uninit();
-static mut PREV_SIGFPE: MaybeUninit<libc::sigaction> = MaybeUninit::uninit();
-
-pub unsafe fn platform_init() {
-    if cfg!(miri) {
-        return;
-    }
-    let register = |slot: &mut MaybeUninit<libc::sigaction>, signal: i32| {
-        let mut handler: libc::sigaction = mem::zeroed();
-        // The flags here are relatively careful, and they are...
-        //
-        // SA_SIGINFO gives us access to information like the program
-        // counter from where the fault happened.
-        //
-        // SA_ONSTACK allows us to handle signals on an alternate stack,
-        // so that the handler can run in response to running out of
-        // stack space on the main stack. Rust installs an alternate
-        // stack with sigaltstack, so we rely on that.
-        //
-        // SA_NODEFER allows us to reenter the signal handler if we
-        // crash while handling the signal, and fall through to the
-        // Breakpad handler by testing handlingSegFault.
-        handler.sa_flags = libc::SA_SIGINFO | libc::SA_NODEFER | libc::SA_ONSTACK;
-        handler.sa_sigaction = trap_handler as usize;
-        libc::sigemptyset(&mut handler.sa_mask);
-        if libc::sigaction(signal, &handler, slot.as_mut_ptr()) != 0 {
-            panic!(
-                "unable to install signal handler: {}",
-                io::Error::last_os_error(),
-            );
-        }
-    };
-
-    // Allow handling OOB with signals on all architectures
-    register(&mut PREV_SIGSEGV, libc::SIGSEGV);
-
-    // Handle `unreachable` instructions which execute `ud2` right now
-    register(&mut PREV_SIGILL, libc::SIGILL);
-
-    // x86 and s390x use SIGFPE to report division by zero
-    if cfg!(target_arch = "x86_64") || cfg!(target_arch = "s390x") {
-        register(&mut PREV_SIGFPE, libc::SIGFPE);
-    }
-
-    // Sometimes we need to handle SIGBUS too:
-    // - On Darwin, guard page accesses are raised as SIGBUS.
-    if cfg!(target_os = "macos") || cfg!(target_os = "freebsd") {
-        register(&mut PREV_SIGBUS, libc::SIGBUS);
-    }
-
-    // TODO(#1980): x86-32, if we support it, will also need a SIGFPE handler.
-    // TODO(#1173): ARM32, if we support it, will also need a SIGBUS handler.
-}
-
-unsafe extern "C" fn trap_handler(
-    signum: libc::c_int,
-    siginfo: *mut libc::siginfo_t,
-    context: *mut libc::c_void,
-) {
-    let previous = match signum {
-        libc::SIGSEGV => &PREV_SIGSEGV,
-        libc::SIGBUS => &PREV_SIGBUS,
-        libc::SIGFPE => &PREV_SIGFPE,
-        libc::SIGILL => &PREV_SIGILL,
-        _ => panic!("unknown signal: {}", signum),
-    };
-    let handled = tls::with(|info| {
-        // If no wasm code is executing, we don't handle this as a wasm
-        // trap.
-        let info = match info {
-            Some(info) => info,
-            None => return false,
-        };
-
-        // If we hit an exception while handling a previous trap, that's
-        // quite bad, so bail out and let the system handle this
-        // recursive segfault.
-        //
-        // Otherwise flag ourselves as handling a trap, do the trap
-        // handling, and reset our trap handling flag. Then we figure
-        // out what to do based on the result of the trap handling.
-        let (pc, fp) = get_pc_and_fp(context, signum);
-        let jmp_buf = info.take_jmp_buf_if_trap(pc, |handler| handler(signum, siginfo, context));
-
-        // Figure out what to do based on the result of this handling of
-        // the trap. Note that our sentinel value of 1 means that the
-        // exception was handled by a custom exception handler, so we
-        // keep executing.
-        if jmp_buf.is_null() {
-            return false;
-        }
-        if jmp_buf as usize == 1 {
-            return true;
-        }
-        let faulting_addr = match signum {
-            libc::SIGSEGV | libc::SIGBUS => Some((*siginfo).si_addr() as usize),
-            _ => None,
-        };
-        info.set_jit_trap(pc, fp, faulting_addr);
-        // On macOS this is a bit special, unfortunately. If we were to
-        // `siglongjmp` out of the signal handler that notably does
-        // *not* reset the sigaltstack state of our signal handler. This
-        // seems to trick the kernel into thinking that the sigaltstack
-        // is still in use upon delivery of the next signal, meaning
-        // that the sigaltstack is not ever used again if we immediately
-        // call `wasmtime_longjmp` here.
-        //
-        // Note that if we use `longjmp` instead of `siglongjmp` then
-        // the problem is fixed. The problem with that, however, is that
-        // `setjmp` is much slower than `sigsetjmp` due to the
-        // preservation of the proceses signal mask. The reason
-        // `longjmp` appears to work is that it seems to call a function
-        // (according to published macOS sources) called
-        // `_sigunaltstack` which updates the kernel to say the
-        // sigaltstack is no longer in use. We ideally want to call that
-        // here but I don't think there's a stable way for us to call
-        // that.
-        //
-        // Given all that, on macOS only, we do the next best thing. We
-        // return from the signal handler after updating the register
-        // context. This will cause control to return to our shim
-        // function defined here which will perform the
-        // `wasmtime_longjmp` (`siglongjmp`) for us. The reason this
-        // works is that by returning from the signal handler we'll
-        // trigger all the normal machinery for "the signal handler is
-        // done running" which will clear the sigaltstack flag and allow
-        // reusing it for the next signal. Then upon resuming in our custom
-        // code we blow away the stack anyway with a longjmp.
-        if cfg!(target_os = "macos") {
-            unsafe extern "C" fn wasmtime_longjmp_shim(jmp_buf: *const u8) {
-                wasmtime_longjmp(jmp_buf)
-            }
-            set_pc(context, wasmtime_longjmp_shim as usize, jmp_buf as usize);
-            return true;
-        }
-        wasmtime_longjmp(jmp_buf)
-    });
-
-    if handled {
-        return;
-    }
-
-    // This signal is not for any compiled wasm code we expect, so we
-    // need to forward the signal to the next handler. If there is no
-    // next handler (SIG_IGN or SIG_DFL), then it's time to crash. To do
-    // this, we set the signal back to its original disposition and
-    // return. This will cause the faulting op to be re-executed which
-    // will crash in the normal way. If there is a next handler, call
-    // it. It will either crash synchronously, fix up the instruction
-    // so that execution can continue and return, or trigger a crash by
-    // returning the signal to it's original disposition and returning.
-    let previous = &*previous.as_ptr();
-    if previous.sa_flags & libc::SA_SIGINFO != 0 {
-        mem::transmute::<usize, extern "C" fn(libc::c_int, *mut libc::siginfo_t, *mut libc::c_void)>(
-            previous.sa_sigaction,
-        )(signum, siginfo, context)
-    } else if previous.sa_sigaction == libc::SIG_DFL || previous.sa_sigaction == libc::SIG_IGN {
-        libc::sigaction(signum, previous, ptr::null_mut());
-    } else {
-        mem::transmute::<usize, extern "C" fn(libc::c_int)>(previous.sa_sigaction)(signum)
-    }
-}
-
-// FIXME(rust-lang/libc#3312) the currenty definition of `ucontext_t` in the
-// `libc` crate is incorrect on aarch64-apple-drawin so it's defined here with a
-// more accurate definition. When that PR and/or issue is resolved then this
-// should no longer be necessary.
-#[repr(C)]
-#[cfg(all(target_arch = "aarch64", target_os = "macos"))]
-struct ucontext_t {
-    uc_onstack: libc::c_int,
-    uc_sigmask: libc::sigset_t,
-    uc_stack: libc::stack_t,
-    uc_link: *mut libc::ucontext_t,
-    uc_mcsize: usize,
-    uc_mcontext: libc::mcontext_t,
-}
-
-unsafe fn get_pc_and_fp(cx: *mut libc::c_void, _signum: libc::c_int) -> (*const u8, usize) {
-    cfg_if::cfg_if! {
-        if #[cfg(all(any(target_os = "linux", target_os = "android"), target_arch = "x86_64"))] {
-            let cx = &*(cx as *const libc::ucontext_t);
-            (
-                cx.uc_mcontext.gregs[libc::REG_RIP as usize] as *const u8,
-                cx.uc_mcontext.gregs[libc::REG_RBP as usize] as usize
-            )
-        } else if #[cfg(all(any(target_os = "linux", target_os = "android"), target_arch = "aarch64"))] {
-            let cx = &*(cx as *const libc::ucontext_t);
-            (
-                cx.uc_mcontext.pc as *const u8,
-                cx.uc_mcontext.regs[29] as usize,
-            )
-        } else if #[cfg(all(target_os = "linux", target_arch = "s390x"))] {
-            // On s390x, SIGILL and SIGFPE are delivered with the PSW address
-            // pointing *after* the faulting instruction, while SIGSEGV and
-            // SIGBUS are delivered with the PSW address pointing *to* the
-            // faulting instruction.  To handle this, the code generator registers
-            // any trap that results in one of "late" signals on the last byte
-            // of the instruction, and any trap that results in one of the "early"
-            // signals on the first byte of the instruction (as usual).  This
-            // means we simply need to decrement the reported PSW address by
-            // one in the case of a "late" signal here to ensure we always
-            // correctly find the associated trap handler.
-            let trap_offset = match _signum {
-                libc::SIGILL | libc::SIGFPE => 1,
-                _ => 0,
-            };
-            let cx = &*(cx as *const libc::ucontext_t);
-            (
-                (cx.uc_mcontext.psw.addr - trap_offset) as *const u8,
-                *(cx.uc_mcontext.gregs[15] as *const usize),
-            )
-        } else if #[cfg(all(target_os = "macos", target_arch = "x86_64"))] {
-            let cx = &*(cx as *const libc::ucontext_t);
-            (
-                (*cx.uc_mcontext).__ss.__rip as *const u8,
-                (*cx.uc_mcontext).__ss.__rbp as usize,
-            )
-        } else if #[cfg(all(target_os = "macos", target_arch = "aarch64"))] {
-            let cx = &*(cx as *const ucontext_t);
-            (
-                (*cx.uc_mcontext).__ss.__pc as *const u8,
-                (*cx.uc_mcontext).__ss.__fp as usize,
-            )
-        } else if #[cfg(all(target_os = "freebsd", target_arch = "x86_64"))] {
-            let cx = &*(cx as *const libc::ucontext_t);
-            (
-                cx.uc_mcontext.mc_rip as *const u8,
-                cx.uc_mcontext.mc_rbp as usize,
-            )
-        } else if #[cfg(all(target_os = "linux", target_arch = "riscv64"))] {
-            let cx = &*(cx as *const libc::ucontext_t);
-            (
-                cx.uc_mcontext.__gregs[libc::REG_PC] as *const u8,
-                cx.uc_mcontext.__gregs[libc::REG_S0] as usize,
-            )
-        } else if #[cfg(all(target_os = "freebsd", target_arch = "aarch64"))] {
-            let cx = &*(cx as *const libc::mcontext_t);
-            (
-                cx.mc_gpregs.gp_elr as *const u8,
-                cx.mc_gpregs.gp_x[29] as usize,
-            )
-        }
-        else {
-            compile_error!("unsupported platform");
-        }
-    }
-}
-
-// This is only used on macOS targets for calling an unwinding shim
-// function to ensure that we return from the signal handler.
-//
-// See more comments above where this is called for what it's doing.
-unsafe fn set_pc(cx: *mut libc::c_void, pc: usize, arg1: usize) {
-    cfg_if::cfg_if! {
-        if #[cfg(not(target_os = "macos"))] {
-            let _ = (cx, pc, arg1);
-            unreachable!(); // not used on these platforms
-        } else if #[cfg(target_arch = "x86_64")] {
-            let cx = &mut *(cx as *mut libc::ucontext_t);
-            (*cx.uc_mcontext).__ss.__rip = pc as u64;
-            (*cx.uc_mcontext).__ss.__rdi = arg1 as u64;
-            // We're simulating a "pseudo-call" so we need to ensure
-            // stack alignment is properly respected, notably that on a
-            // `call` instruction the stack is 8/16-byte aligned, then
-            // the function adjusts itself to be 16-byte aligned.
-            //
-            // Most of the time the stack pointer is 16-byte aligned at
-            // the time of the trap but for more robust-ness with JIT
-            // code where it may ud2 in a prologue check before the
-            // stack is aligned we double-check here.
-            if (*cx.uc_mcontext).__ss.__rsp % 16 == 0 {
-                (*cx.uc_mcontext).__ss.__rsp -= 8;
-            }
-        } else if #[cfg(target_arch = "aarch64")] {
-            let cx = &mut *(cx as *mut ucontext_t);
-            (*cx.uc_mcontext).__ss.__pc = pc as u64;
-            (*cx.uc_mcontext).__ss.__x[0] = arg1 as u64;
-        } else {
-            compile_error!("unsupported macos target architecture");
-        }
-    }
-}
-
-/// A function for registering a custom alternate signal stack (sigaltstack).
-///
-/// Rust's libstd installs an alternate stack with size `SIGSTKSZ`, which is not
-/// always large enough for our signal handling code. Override it by creating
-/// and registering our own alternate stack that is large enough and has a guard
-/// page.
-#[cold]
-pub fn lazy_per_thread_init() {
-    // This thread local is purely used to register a `Stack` to get deallocated
-    // when the thread exists. Otherwise this function is only ever called at
-    // most once per-thread.
-    thread_local! {
-        static STACK: RefCell<Option<Stack>> = const { RefCell::new(None) };
-    }
-
-    /// The size of the sigaltstack (not including the guard, which will be
-    /// added). Make this large enough to run our signal handlers.
-    ///
-    /// The main current requirement of the signal handler in terms of stack
-    /// space is that `malloc`/`realloc` are called to create a `Backtrace` of
-    /// wasm frames.
-    ///
-    /// Historically this was 16k. Turns out jemalloc requires more than 16k of
-    /// stack space in debug mode, so this was bumped to 64k.
-    const MIN_STACK_SIZE: usize = 64 * 4096;
-
-    struct Stack {
-        mmap_ptr: *mut libc::c_void,
-        mmap_size: usize,
-    }
-
-    return STACK.with(|s| {
-        *s.borrow_mut() = unsafe { allocate_sigaltstack() };
-    });
-
-    unsafe fn allocate_sigaltstack() -> Option<Stack> {
-        if cfg!(miri) {
-            return None;
-        }
-
-        // Check to see if the existing sigaltstack, if it exists, is big
-        // enough. If so we don't need to allocate our own.
-        let mut old_stack = mem::zeroed();
-        let r = libc::sigaltstack(ptr::null(), &mut old_stack);
-        assert_eq!(
-            r,
-            0,
-            "learning about sigaltstack failed: {}",
-            io::Error::last_os_error()
-        );
-        if old_stack.ss_flags & libc::SS_DISABLE == 0 && old_stack.ss_size >= MIN_STACK_SIZE {
-            return None;
-        }
-
-        // ... but failing that we need to allocate our own, so do all that
-        // here.
-        let page_size = crate::page_size();
-        let guard_size = page_size;
-        let alloc_size = guard_size + MIN_STACK_SIZE;
-
-        let ptr = rustix::mm::mmap_anonymous(
-            null_mut(),
-            alloc_size,
-            rustix::mm::ProtFlags::empty(),
-            rustix::mm::MapFlags::PRIVATE,
-        )
-        .expect("failed to allocate memory for sigaltstack");
-
-        // Prepare the stack with readable/writable memory and then register it
-        // with `sigaltstack`.
-        let stack_ptr = (ptr as usize + guard_size) as *mut std::ffi::c_void;
-        rustix::mm::mprotect(
-            stack_ptr,
-            MIN_STACK_SIZE,
-            rustix::mm::MprotectFlags::READ | rustix::mm::MprotectFlags::WRITE,
-        )
-        .expect("mprotect to configure memory for sigaltstack failed");
-        let new_stack = libc::stack_t {
-            ss_sp: stack_ptr,
-            ss_flags: 0,
-            ss_size: MIN_STACK_SIZE,
-        };
-        let r = libc::sigaltstack(&new_stack, ptr::null_mut());
-        assert_eq!(
-            r,
-            0,
-            "registering new sigaltstack failed: {}",
-            io::Error::last_os_error()
-        );
-
-        Some(Stack {
-            mmap_ptr: ptr,
-            mmap_size: alloc_size,
-        })
-    }
-
-    impl Drop for Stack {
-        fn drop(&mut self) {
-            unsafe {
-                // Deallocate the stack memory.
-                let r = rustix::mm::munmap(self.mmap_ptr, self.mmap_size);
-                debug_assert!(r.is_ok(), "munmap failed during thread shutdown");
-            }
-        }
-    }
-}

data/ext/cargo-vendor/wasmtime-runtime-15.0.1/src/traphandlers/windows.rs

@@ -1,89 +0,0 @@
-use crate::traphandlers::{tls, wasmtime_longjmp};
-use std::io;
-use windows_sys::Win32::Foundation::*;
-use windows_sys::Win32::System::Diagnostics::Debug::*;
-use windows_sys::Win32::System::Kernel::*;
-
-/// Function which may handle custom signals while processing traps.
-pub type SignalHandler<'a> = dyn Fn(*mut EXCEPTION_POINTERS) -> bool + Send + Sync + 'a;
-
-pub unsafe fn platform_init() {
-    // our trap handler needs to go first, so that we can recover from
-    // wasm faults and continue execution, so pass `1` as a true value
-    // here.
-    if AddVectoredExceptionHandler(1, Some(exception_handler)).is_null() {
-        panic!(
-            "failed to add exception handler: {}",
-            io::Error::last_os_error()
-        );
-    }
-}
-
-unsafe extern "system" fn exception_handler(exception_info: *mut EXCEPTION_POINTERS) -> i32 {
-    // Check the kind of exception, since we only handle a subset within
-    // wasm code. If anything else happens we want to defer to whatever
-    // the rest of the system wants to do for this exception.
-    let record = &*(*exception_info).ExceptionRecord;
-    if record.ExceptionCode != EXCEPTION_ACCESS_VIOLATION
-        && record.ExceptionCode != EXCEPTION_ILLEGAL_INSTRUCTION
-        && record.ExceptionCode != EXCEPTION_INT_DIVIDE_BY_ZERO
-        && record.ExceptionCode != EXCEPTION_INT_OVERFLOW
-    {
-        return ExceptionContinueSearch;
-    }
-
-    // FIXME: this is what the previous C++ did to make sure that TLS
-    // works by the time we execute this trap handling code. This isn't
-    // exactly super easy to call from Rust though and it's not clear we
-    // necessarily need to do so. Leaving this here in case we need this
-    // in the future, but for now we can probably wait until we see a
-    // strange fault before figuring out how to reimplement this in
-    // Rust.
-    //
-    // if (!NtCurrentTeb()->Reserved1[sThreadLocalArrayPointerIndex]) {
-    //     return ExceptionContinueSearch;
-    // }
-
-    // This is basically the same as the unix version above, only with a
-    // few parameters tweaked here and there.
-    tls::with(|info| {
-        let info = match info {
-            Some(info) => info,
-            None => return ExceptionContinueSearch,
-        };
-        cfg_if::cfg_if! {
-            if #[cfg(target_arch = "x86_64")] {
-                let ip = (*(*exception_info).ContextRecord).Rip as *const u8;
-                let fp = (*(*exception_info).ContextRecord).Rbp as usize;
-            } else if #[cfg(target_arch = "aarch64")] {
-                let ip = (*(*exception_info).ContextRecord).Pc as *const u8;
-                let fp = (*(*exception_info).ContextRecord).Anonymous.Anonymous.Fp as usize;
-            } else {
-                compile_error!("unsupported platform");
-            }
-        }
-        // For access violations the first element in `ExceptionInformation` is
-        // an indicator as to whether the fault was a read/write. The second
-        // element is the address of the inaccessible data causing this
-        // violation.
-        let faulting_addr = if record.ExceptionCode == EXCEPTION_ACCESS_VIOLATION {
-            assert!(record.NumberParameters >= 2);
-            Some(record.ExceptionInformation[1])
-        } else {
-            None
-        };
-        let jmp_buf = info.take_jmp_buf_if_trap(ip, |handler| handler(exception_info));
-        if jmp_buf.is_null() {
-            ExceptionContinueSearch
-        } else if jmp_buf as usize == 1 {
-            ExceptionContinueExecution
-        } else {
-            info.set_jit_trap(ip, fp, faulting_addr);
-            wasmtime_longjmp(jmp_buf)
-        }
-    })
-}
-
-pub fn lazy_per_thread_init() {
-    // Unused on Windows
-}