wasmtime 15.0.1 → 16.0.0

data/ext/cargo-vendor/cranelift-codegen-0.102.1/src/ir/dfg.rs

@@ -1,1730 +0,0 @@
-//! Data flow graph tracking Instructions, Values, and blocks.
-
-use crate::entity::{self, PrimaryMap, SecondaryMap};
-use crate::ir;
-use crate::ir::builder::ReplaceBuilder;
-use crate::ir::dynamic_type::{DynamicTypeData, DynamicTypes};
-use crate::ir::instructions::{CallInfo, InstructionData};
-use crate::ir::pcc::Fact;
-use crate::ir::{
-    types, Block, BlockCall, ConstantData, ConstantPool, DynamicType, ExtFuncData, FuncRef,
-    Immediate, Inst, JumpTables, RelSourceLoc, SigRef, Signature, Type, Value,
-    ValueLabelAssignments, ValueList, ValueListPool,
-};
-use crate::packed_option::ReservedValue;
-use crate::write::write_operands;
-use core::fmt;
-use core::iter;
-use core::mem;
-use core::ops::{Index, IndexMut};
-use core::u16;
-
-use alloc::collections::BTreeMap;
-#[cfg(feature = "enable-serde")]
-use serde_derive::{Deserialize, Serialize};
-use smallvec::SmallVec;
-
-/// Storage for instructions within the DFG.
-#[derive(Clone, PartialEq, Hash)]
-#[cfg_attr(feature = "enable-serde", derive(Serialize, Deserialize))]
-pub struct Insts(PrimaryMap<Inst, InstructionData>);
-
-/// Allow immutable access to instructions via indexing.
-impl Index<Inst> for Insts {
-    type Output = InstructionData;
-
-    fn index(&self, inst: Inst) -> &InstructionData {
-        self.0.index(inst)
-    }
-}
-
-/// Allow mutable access to instructions via indexing.
-impl IndexMut<Inst> for Insts {
-    fn index_mut(&mut self, inst: Inst) -> &mut InstructionData {
-        self.0.index_mut(inst)
-    }
-}
-
-/// Storage for basic blocks within the DFG.
-#[derive(Clone, PartialEq, Hash)]
-#[cfg_attr(feature = "enable-serde", derive(Serialize, Deserialize))]
-pub struct Blocks(PrimaryMap<Block, BlockData>);
-
-impl Blocks {
-    /// Create a new basic block.
-    pub fn add(&mut self) -> Block {
-        self.0.push(BlockData::new())
-    }
-
-    /// Get the total number of basic blocks created in this function, whether they are
-    /// currently inserted in the layout or not.
-    ///
-    /// This is intended for use with `SecondaryMap::with_capacity`.
-    pub fn len(&self) -> usize {
-        self.0.len()
-    }
-
-    /// Returns `true` if the given block reference is valid.
-    pub fn is_valid(&self, block: Block) -> bool {
-        self.0.is_valid(block)
-    }
-}
-
-impl Index<Block> for Blocks {
-    type Output = BlockData;
-
-    fn index(&self, block: Block) -> &BlockData {
-        &self.0[block]
-    }
-}
-
-impl IndexMut<Block> for Blocks {
-    fn index_mut(&mut self, block: Block) -> &mut BlockData {
-        &mut self.0[block]
-    }
-}
-
-/// A data flow graph defines all instructions and basic blocks in a function as well as
-/// the data flow dependencies between them. The DFG also tracks values which can be either
-/// instruction results or block parameters.
-///
-/// The layout of blocks in the function and of instructions in each block is recorded by the
-/// `Layout` data structure which forms the other half of the function representation.
-///
-#[derive(Clone, PartialEq, Hash)]
-#[cfg_attr(feature = "enable-serde", derive(Serialize, Deserialize))]
-pub struct DataFlowGraph {
-    /// Data about all of the instructions in the function, including opcodes and operands.
-    /// The instructions in this map are not in program order. That is tracked by `Layout`, along
-    /// with the block containing each instruction.
-    pub insts: Insts,
-
-    /// List of result values for each instruction.
-    ///
-    /// This map gets resized automatically by `make_inst()` so it is always in sync with the
-    /// primary `insts` map.
-    results: SecondaryMap<Inst, ValueList>,
-
-    /// basic blocks in the function and their parameters.
-    ///
-    /// This map is not in program order. That is handled by `Layout`, and so is the sequence of
-    /// instructions contained in each block.
-    pub blocks: Blocks,
-
-    /// Dynamic types created.
-    pub dynamic_types: DynamicTypes,
-
-    /// Memory pool of value lists.
-    ///
-    /// The `ValueList` references into this pool appear in many places:
-    ///
-    /// - Instructions in `insts` that don't have room for their entire argument list inline.
-    /// - Instruction result values in `results`.
-    /// - block parameters in `blocks`.
-    pub value_lists: ValueListPool,
-
-    /// Primary value table with entries for all values.
-    values: PrimaryMap<Value, ValueDataPacked>,
-
-    /// Facts: proof-carrying-code assertions about values.
-    pub facts: SecondaryMap<Value, Option<Fact>>,
-
-    /// Function signature table. These signatures are referenced by indirect call instructions as
-    /// well as the external function references.
-    pub signatures: PrimaryMap<SigRef, Signature>,
-
-    /// The pre-legalization signature for each entry in `signatures`, if any.
-    pub old_signatures: SecondaryMap<SigRef, Option<Signature>>,
-
-    /// External function references. These are functions that can be called directly.
-    pub ext_funcs: PrimaryMap<FuncRef, ExtFuncData>,
-
-    /// Saves Value labels.
-    pub values_labels: Option<BTreeMap<Value, ValueLabelAssignments>>,
-
-    /// Constants used within the function.
-    pub constants: ConstantPool,
-
-    /// Stores large immediates that otherwise will not fit on InstructionData.
-    pub immediates: PrimaryMap<Immediate, ConstantData>,
-
-    /// Jump tables used in this function.
-    pub jump_tables: JumpTables,
-}
-
-impl DataFlowGraph {
-    /// Create a new empty `DataFlowGraph`.
-    pub fn new() -> Self {
-        Self {
-            insts: Insts(PrimaryMap::new()),
-            results: SecondaryMap::new(),
-            blocks: Blocks(PrimaryMap::new()),
-            dynamic_types: DynamicTypes::new(),
-            value_lists: ValueListPool::new(),
-            values: PrimaryMap::new(),
-            facts: SecondaryMap::new(),
-            signatures: PrimaryMap::new(),
-            old_signatures: SecondaryMap::new(),
-            ext_funcs: PrimaryMap::new(),
-            values_labels: None,
-            constants: ConstantPool::new(),
-            immediates: PrimaryMap::new(),
-            jump_tables: JumpTables::new(),
-        }
-    }
-
-    /// Clear everything.
-    pub fn clear(&mut self) {
-        self.insts.0.clear();
-        self.results.clear();
-        self.blocks.0.clear();
-        self.dynamic_types.clear();
-        self.value_lists.clear();
-        self.values.clear();
-        self.signatures.clear();
-        self.old_signatures.clear();
-        self.ext_funcs.clear();
-        self.values_labels = None;
-        self.constants.clear();
-        self.immediates.clear();
-        self.jump_tables.clear();
-        self.facts.clear();
-    }
-
-    /// Get the total number of instructions created in this function, whether they are currently
-    /// inserted in the layout or not.
-    ///
-    /// This is intended for use with `SecondaryMap::with_capacity`.
-    pub fn num_insts(&self) -> usize {
-        self.insts.0.len()
-    }
-
-    /// Returns `true` if the given instruction reference is valid.
-    pub fn inst_is_valid(&self, inst: Inst) -> bool {
-        self.insts.0.is_valid(inst)
-    }
-
-    /// Get the total number of basic blocks created in this function, whether they are
-    /// currently inserted in the layout or not.
-    ///
-    /// This is intended for use with `SecondaryMap::with_capacity`.
-    pub fn num_blocks(&self) -> usize {
-        self.blocks.len()
-    }
-
-    /// Returns `true` if the given block reference is valid.
-    pub fn block_is_valid(&self, block: Block) -> bool {
-        self.blocks.is_valid(block)
-    }
-
-    /// Make a BlockCall, bundling together the block and its arguments.
-    pub fn block_call(&mut self, block: Block, args: &[Value]) -> BlockCall {
-        BlockCall::new(block, args, &mut self.value_lists)
-    }
-
-    /// Get the total number of values.
-    pub fn num_values(&self) -> usize {
-        self.values.len()
-    }
-
-    /// Get an iterator over all values and their definitions.
-    pub fn values_and_defs(&self) -> impl Iterator<Item = (Value, ValueDef)> + '_ {
-        self.values().map(|value| (value, self.value_def(value)))
-    }
-
-    /// Starts collection of debug information.
-    pub fn collect_debug_info(&mut self) {
-        if self.values_labels.is_none() {
-            self.values_labels = Some(Default::default());
-        }
-    }
-
-    /// Inserts a `ValueLabelAssignments::Alias` for `to_alias` if debug info
-    /// collection is enabled.
-    pub fn add_value_label_alias(&mut self, to_alias: Value, from: RelSourceLoc, value: Value) {
-        if let Some(values_labels) = self.values_labels.as_mut() {
-            values_labels.insert(to_alias, ir::ValueLabelAssignments::Alias { from, value });
-        }
-    }
-}
-
-/// Resolve value aliases.
-///
-/// Find the original SSA value that `value` aliases, or None if an
-/// alias cycle is detected.
-fn maybe_resolve_aliases(
-    values: &PrimaryMap<Value, ValueDataPacked>,
-    value: Value,
-) -> Option<Value> {
-    let mut v = value;
-
-    // Note that values may be empty here.
-    for _ in 0..=values.len() {
-        if let ValueData::Alias { original, .. } = ValueData::from(values[v]) {
-            v = original;
-        } else {
-            return Some(v);
-        }
-    }
-
-    None
-}
-
-/// Resolve value aliases.
-///
-/// Find the original SSA value that `value` aliases.
-fn resolve_aliases(values: &PrimaryMap<Value, ValueDataPacked>, value: Value) -> Value {
-    if let Some(v) = maybe_resolve_aliases(values, value) {
-        v
-    } else {
-        panic!("Value alias loop detected for {}", value);
-    }
-}
-
-/// Iterator over all Values in a DFG.
-pub struct Values<'a> {
-    inner: entity::Iter<'a, Value, ValueDataPacked>,
-}
-
-/// Check for non-values.
-fn valid_valuedata(data: ValueDataPacked) -> bool {
-    let data = ValueData::from(data);
-    if let ValueData::Alias {
-        ty: types::INVALID,
-        original,
-    } = ValueData::from(data)
-    {
-        if original == Value::reserved_value() {
-            return false;
-        }
-    }
-    true
-}
-
-impl<'a> Iterator for Values<'a> {
-    type Item = Value;
-
-    fn next(&mut self) -> Option<Self::Item> {
-        self.inner
-            .by_ref()
-            .find(|kv| valid_valuedata(*kv.1))
-            .map(|kv| kv.0)
-    }
-}
-
-/// Handling values.
-///
-/// Values are either block parameters or instruction results.
-impl DataFlowGraph {
-    /// Allocate an extended value entry.
-    fn make_value(&mut self, data: ValueData) -> Value {
-        self.values.push(data.into())
-    }
-
-    /// Get an iterator over all values.
-    pub fn values<'a>(&'a self) -> Values {
-        Values {
-            inner: self.values.iter(),
-        }
-    }
-
-    /// Check if a value reference is valid.
-    pub fn value_is_valid(&self, v: Value) -> bool {
-        self.values.is_valid(v)
-    }
-
-    /// Get the type of a value.
-    pub fn value_type(&self, v: Value) -> Type {
-        self.values[v].ty()
-    }
-
-    /// Get the definition of a value.
-    ///
-    /// This is either the instruction that defined it or the Block that has the value as an
-    /// parameter.
-    pub fn value_def(&self, v: Value) -> ValueDef {
-        match ValueData::from(self.values[v]) {
-            ValueData::Inst { inst, num, .. } => ValueDef::Result(inst, num as usize),
-            ValueData::Param { block, num, .. } => ValueDef::Param(block, num as usize),
-            ValueData::Alias { original, .. } => {
-                // Make sure we only recurse one level. `resolve_aliases` has safeguards to
-                // detect alias loops without overrunning the stack.
-                self.value_def(self.resolve_aliases(original))
-            }
-            ValueData::Union { x, y, .. } => ValueDef::Union(x, y),
-        }
-    }
-
-    /// Determine if `v` is an attached instruction result / block parameter.
-    ///
-    /// An attached value can't be attached to something else without first being detached.
-    ///
-    /// Value aliases are not considered to be attached to anything. Use `resolve_aliases()` to
-    /// determine if the original aliased value is attached.
-    pub fn value_is_attached(&self, v: Value) -> bool {
-        use self::ValueData::*;
-        match ValueData::from(self.values[v]) {
-            Inst { inst, num, .. } => Some(&v) == self.inst_results(inst).get(num as usize),
-            Param { block, num, .. } => Some(&v) == self.block_params(block).get(num as usize),
-            Alias { .. } => false,
-            Union { .. } => false,
-        }
-    }
-
-    /// Resolve value aliases.
-    ///
-    /// Find the original SSA value that `value` aliases.
-    pub fn resolve_aliases(&self, value: Value) -> Value {
-        resolve_aliases(&self.values, value)
-    }
-
-    /// Resolve all aliases among inst's arguments.
-    ///
-    /// For each argument of inst which is defined by an alias, replace the
-    /// alias with the aliased value.
-    pub fn resolve_aliases_in_arguments(&mut self, inst: Inst) {
-        self.map_inst_values(inst, |dfg, arg| resolve_aliases(&dfg.values, arg));
-    }
-
-    /// Turn a value into an alias of another.
-    ///
-    /// Change the `dest` value to behave as an alias of `src`. This means that all uses of `dest`
-    /// will behave as if they used that value `src`.
-    ///
-    /// The `dest` value can't be attached to an instruction or block.
-    pub fn change_to_alias(&mut self, dest: Value, src: Value) {
-        debug_assert!(!self.value_is_attached(dest));
-        // Try to create short alias chains by finding the original source value.
-        // This also avoids the creation of loops.
-        let original = self.resolve_aliases(src);
-        debug_assert_ne!(
-            dest, original,
-            "Aliasing {} to {} would create a loop",
-            dest, src
-        );
-        let ty = self.value_type(original);
-        debug_assert_eq!(
-            self.value_type(dest),
-            ty,
-            "Aliasing {} to {} would change its type {} to {}",
-            dest,
-            src,
-            self.value_type(dest),
-            ty
-        );
-        debug_assert_ne!(ty, types::INVALID);
-
-        self.values[dest] = ValueData::Alias { ty, original }.into();
-    }
-
-    /// Replace the results of one instruction with aliases to the results of another.
-    ///
-    /// Change all the results of `dest_inst` to behave as aliases of
-    /// corresponding results of `src_inst`, as if calling change_to_alias for
-    /// each.
-    ///
-    /// After calling this instruction, `dest_inst` will have had its results
-    /// cleared, so it likely needs to be removed from the graph.
-    ///
-    pub fn replace_with_aliases(&mut self, dest_inst: Inst, src_inst: Inst) {
-        debug_assert_ne!(
-            dest_inst, src_inst,
-            "Replacing {} with itself would create a loop",
-            dest_inst
-        );
-        debug_assert_eq!(
-            self.results[dest_inst].len(&self.value_lists),
-            self.results[src_inst].len(&self.value_lists),
-            "Replacing {} with {} would produce a different number of results.",
-            dest_inst,
-            src_inst
-        );
-
-        for (&dest, &src) in self.results[dest_inst]
-            .as_slice(&self.value_lists)
-            .iter()
-            .zip(self.results[src_inst].as_slice(&self.value_lists))
-        {
-            let original = src;
-            let ty = self.value_type(original);
-            debug_assert_eq!(
-                self.value_type(dest),
-                ty,
-                "Aliasing {} to {} would change its type {} to {}",
-                dest,
-                src,
-                self.value_type(dest),
-                ty
-            );
-            debug_assert_ne!(ty, types::INVALID);
-
-            self.values[dest] = ValueData::Alias { ty, original }.into();
-        }
-
-        self.clear_results(dest_inst);
-    }
-}
-
-/// Where did a value come from?
-#[derive(Clone, Copy, Debug, PartialEq, Eq)]
-pub enum ValueDef {
-    /// Value is the n'th result of an instruction.
-    Result(Inst, usize),
-    /// Value is the n'th parameter to a block.
-    Param(Block, usize),
-    /// Value is a union of two other values.
-    Union(Value, Value),
-}
-
-impl ValueDef {
-    /// Unwrap the instruction where the value was defined, or panic.
-    pub fn unwrap_inst(&self) -> Inst {
-        self.inst().expect("Value is not an instruction result")
-    }
-
-    /// Get the instruction where the value was defined, if any.
-    pub fn inst(&self) -> Option<Inst> {
-        match *self {
-            Self::Result(inst, _) => Some(inst),
-            _ => None,
-        }
-    }
-
-    /// Unwrap the block there the parameter is defined, or panic.
-    pub fn unwrap_block(&self) -> Block {
-        match *self {
-            Self::Param(block, _) => block,
-            _ => panic!("Value is not a block parameter"),
-        }
-    }
-
-    /// Get the number component of this definition.
-    ///
-    /// When multiple values are defined at the same program point, this indicates the index of
-    /// this value.
-    pub fn num(self) -> usize {
-        match self {
-            Self::Result(_, n) | Self::Param(_, n) => n,
-            Self::Union(_, _) => 0,
-        }
-    }
-}
-
-/// Internal table storage for extended values.
-#[derive(Clone, Debug, PartialEq, Hash)]
-#[cfg_attr(feature = "enable-serde", derive(Serialize, Deserialize))]
-enum ValueData {
-    /// Value is defined by an instruction.
-    Inst { ty: Type, num: u16, inst: Inst },
-
-    /// Value is a block parameter.
-    Param { ty: Type, num: u16, block: Block },
-
-    /// Value is an alias of another value.
-    /// An alias value can't be linked as an instruction result or block parameter. It is used as a
-    /// placeholder when the original instruction or block has been rewritten or modified.
-    Alias { ty: Type, original: Value },
-
-    /// Union is a "fork" in representation: the value can be
-    /// represented as either of the values named here. This is used
-    /// for aegraph (acyclic egraph) representation in the DFG.
-    Union { ty: Type, x: Value, y: Value },
-}
-
-/// Bit-packed version of ValueData, for efficiency.
-///
-/// Layout:
-///
-/// ```plain
-///        | tag:2 |  type:14        |    x:24       | y:24          |
-///
-/// Inst       00     ty               inst output     inst index
-/// Param      01     ty               blockparam num  block index
-/// Alias      10     ty               0               value index
-/// Union      11     ty               first value     second value
-/// ```
-#[derive(Clone, Copy, Debug, PartialEq, Hash)]
-#[cfg_attr(feature = "enable-serde", derive(Serialize, Deserialize))]
-struct ValueDataPacked(u64);
-
-/// Encodes a value in 0..2^32 into 0..2^n, where n is less than 32
-/// (and is implied by `mask`), by translating 2^32-1 (0xffffffff)
-/// into 2^n-1 and panic'ing on 2^n..2^32-1.
-fn encode_narrow_field(x: u32, bits: u8) -> u32 {
-    if x == 0xffff_ffff {
-        (1 << bits) - 1
-    } else {
-        debug_assert!(x < (1 << bits));
-        x
-    }
-}
-
-/// The inverse of the above `encode_narrow_field`: unpacks 2^n-1 into
-/// 2^32-1.
-fn decode_narrow_field(x: u32, bits: u8) -> u32 {
-    if x == (1 << bits) - 1 {
-        0xffff_ffff
-    } else {
-        x
-    }
-}
-
-impl ValueDataPacked {
-    const Y_SHIFT: u8 = 0;
-    const Y_BITS: u8 = 24;
-    const X_SHIFT: u8 = Self::Y_SHIFT + Self::Y_BITS;
-    const X_BITS: u8 = 24;
-    const TYPE_SHIFT: u8 = Self::X_SHIFT + Self::X_BITS;
-    const TYPE_BITS: u8 = 14;
-    const TAG_SHIFT: u8 = Self::TYPE_SHIFT + Self::TYPE_BITS;
-    const TAG_BITS: u8 = 2;
-
-    const TAG_INST: u64 = 0;
-    const TAG_PARAM: u64 = 1;
-    const TAG_ALIAS: u64 = 2;
-    const TAG_UNION: u64 = 3;
-
-    fn make(tag: u64, ty: Type, x: u32, y: u32) -> ValueDataPacked {
-        debug_assert!(tag < (1 << Self::TAG_BITS));
-        debug_assert!(ty.repr() < (1 << Self::TYPE_BITS));
-
-        let x = encode_narrow_field(x, Self::X_BITS);
-        let y = encode_narrow_field(y, Self::Y_BITS);
-
-        ValueDataPacked(
-            (tag << Self::TAG_SHIFT)
-                | ((ty.repr() as u64) << Self::TYPE_SHIFT)
-                | ((x as u64) << Self::X_SHIFT)
-                | ((y as u64) << Self::Y_SHIFT),
-        )
-    }
-
-    #[inline(always)]
-    fn field(self, shift: u8, bits: u8) -> u64 {
-        (self.0 >> shift) & ((1 << bits) - 1)
-    }
-
-    #[inline(always)]
-    fn ty(self) -> Type {
-        let ty = self.field(ValueDataPacked::TYPE_SHIFT, ValueDataPacked::TYPE_BITS) as u16;
-        Type::from_repr(ty)
-    }
-
-    #[inline(always)]
-    fn set_type(&mut self, ty: Type) {
-        self.0 &= !(((1 << Self::TYPE_BITS) - 1) << Self::TYPE_SHIFT);
-        self.0 |= (ty.repr() as u64) << Self::TYPE_SHIFT;
-    }
-}
-
-impl From<ValueData> for ValueDataPacked {
-    fn from(data: ValueData) -> Self {
-        match data {
-            ValueData::Inst { ty, num, inst } => {
-                Self::make(Self::TAG_INST, ty, num.into(), inst.as_bits())
-            }
-            ValueData::Param { ty, num, block } => {
-                Self::make(Self::TAG_PARAM, ty, num.into(), block.as_bits())
-            }
-            ValueData::Alias { ty, original } => {
-                Self::make(Self::TAG_ALIAS, ty, 0, original.as_bits())
-            }
-            ValueData::Union { ty, x, y } => {
-                Self::make(Self::TAG_ALIAS, ty, x.as_bits(), y.as_bits())
-            }
-        }
-    }
-}
-
-impl From<ValueDataPacked> for ValueData {
-    fn from(data: ValueDataPacked) -> Self {
-        let tag = data.field(ValueDataPacked::TAG_SHIFT, ValueDataPacked::TAG_BITS);
-        let ty = u16::try_from(data.field(ValueDataPacked::TYPE_SHIFT, ValueDataPacked::TYPE_BITS))
-            .expect("Mask should ensure result fits in a u16");
-        let x = u32::try_from(data.field(ValueDataPacked::X_SHIFT, ValueDataPacked::X_BITS))
-            .expect("Mask should ensure result fits in a u32");
-        let y = u32::try_from(data.field(ValueDataPacked::Y_SHIFT, ValueDataPacked::Y_BITS))
-            .expect("Mask should ensure result fits in a u32");
-
-        let ty = Type::from_repr(ty);
-        match tag {
-            ValueDataPacked::TAG_INST => ValueData::Inst {
-                ty,
-                num: u16::try_from(x).expect("Inst result num should fit in u16"),
-                inst: Inst::from_bits(decode_narrow_field(y, ValueDataPacked::Y_BITS)),
-            },
-            ValueDataPacked::TAG_PARAM => ValueData::Param {
-                ty,
-                num: u16::try_from(x).expect("Blockparam index should fit in u16"),
-                block: Block::from_bits(decode_narrow_field(y, ValueDataPacked::Y_BITS)),
-            },
-            ValueDataPacked::TAG_ALIAS => ValueData::Alias {
-                ty,
-                original: Value::from_bits(decode_narrow_field(y, ValueDataPacked::Y_BITS)),
-            },
-            ValueDataPacked::TAG_UNION => ValueData::Union {
-                ty,
-                x: Value::from_bits(decode_narrow_field(x, ValueDataPacked::X_BITS)),
-                y: Value::from_bits(decode_narrow_field(y, ValueDataPacked::Y_BITS)),
-            },
-            _ => panic!("Invalid tag {} in ValueDataPacked 0x{:x}", tag, data.0),
-        }
-    }
-}
-
-/// Instructions.
-///
-impl DataFlowGraph {
-    /// Create a new instruction.
-    ///
-    /// The type of the first result is indicated by `data.ty`. If the
-    /// instruction produces multiple results, also call
-    /// `make_inst_results` to allocate value table entries. (It is
-    /// always safe to call `make_inst_results`, regardless of how
-    /// many results the instruction has.)
-    pub fn make_inst(&mut self, data: InstructionData) -> Inst {
-        let n = self.num_insts() + 1;
-        self.results.resize(n);
-        self.insts.0.push(data)
-    }
-
-    /// Declares a dynamic vector type
-    pub fn make_dynamic_ty(&mut self, data: DynamicTypeData) -> DynamicType {
-        self.dynamic_types.push(data)
-    }
-
-    /// Returns an object that displays `inst`.
-    pub fn display_inst<'a>(&'a self, inst: Inst) -> DisplayInst<'a> {
-        DisplayInst(self, inst)
-    }
-
-    /// Returns an object that displays the given `value`'s defining instruction.
-    ///
-    /// Panics if the value is not defined by an instruction (i.e. it is a basic
-    /// block argument).
-    pub fn display_value_inst(&self, value: Value) -> DisplayInst<'_> {
-        match self.value_def(value) {
-            ir::ValueDef::Result(inst, _) => self.display_inst(inst),
-            ir::ValueDef::Param(_, _) => panic!("value is not defined by an instruction"),
-            ir::ValueDef::Union(_, _) => panic!("value is a union of two other values"),
-        }
-    }
-
-    /// Construct a read-only visitor context for the values of this instruction.
-    pub fn inst_values<'dfg>(
-        &'dfg self,
-        inst: Inst,
-    ) -> impl DoubleEndedIterator<Item = Value> + 'dfg {
-        self.inst_args(inst)
-            .iter()
-            .chain(
-                self.insts[inst]
-                    .branch_destination(&self.jump_tables)
-                    .into_iter()
-                    .flat_map(|branch| branch.args_slice(&self.value_lists).iter()),
-            )
-            .copied()
-    }
-
-    /// Map a function over the values of the instruction.
-    pub fn map_inst_values<F>(&mut self, inst: Inst, mut body: F)
-    where
-        F: FnMut(&mut DataFlowGraph, Value) -> Value,
-    {
-        for i in 0..self.inst_args(inst).len() {
-            let arg = self.inst_args(inst)[i];
-            self.inst_args_mut(inst)[i] = body(self, arg);
-        }
-
-        for block_ix in 0..self.insts[inst].branch_destination(&self.jump_tables).len() {
-            // We aren't changing the size of the args list, so we won't need to write the branch
-            // back to the instruction.
-            let mut block = self.insts[inst].branch_destination(&self.jump_tables)[block_ix];
-            for i in 0..block.args_slice(&self.value_lists).len() {
-                let arg = block.args_slice(&self.value_lists)[i];
-                block.args_slice_mut(&mut self.value_lists)[i] = body(self, arg);
-            }
-        }
-    }
-
-    /// Overwrite the instruction's value references with values from the iterator.
-    /// NOTE: the iterator provided is expected to yield at least as many values as the instruction
-    /// currently has.
-    pub fn overwrite_inst_values<I>(&mut self, inst: Inst, mut values: I)
-    where
-        I: Iterator<Item = Value>,
-    {
-        for arg in self.inst_args_mut(inst) {
-            *arg = values.next().unwrap();
-        }
-
-        for block_ix in 0..self.insts[inst].branch_destination(&self.jump_tables).len() {
-            let mut block = self.insts[inst].branch_destination(&self.jump_tables)[block_ix];
-            for arg in block.args_slice_mut(&mut self.value_lists) {
-                *arg = values.next().unwrap();
-            }
-        }
-    }
-
-    /// Get all value arguments on `inst` as a slice.
-    pub fn inst_args(&self, inst: Inst) -> &[Value] {
-        self.insts[inst].arguments(&self.value_lists)
-    }
-
-    /// Get all value arguments on `inst` as a mutable slice.
-    pub fn inst_args_mut(&mut self, inst: Inst) -> &mut [Value] {
-        self.insts[inst].arguments_mut(&mut self.value_lists)
-    }
-
-    /// Get the fixed value arguments on `inst` as a slice.
-    pub fn inst_fixed_args(&self, inst: Inst) -> &[Value] {
-        let num_fixed_args = self.insts[inst]
-            .opcode()
-            .constraints()
-            .num_fixed_value_arguments();
-        &self.inst_args(inst)[..num_fixed_args]
-    }
-
-    /// Get the fixed value arguments on `inst` as a mutable slice.
-    pub fn inst_fixed_args_mut(&mut self, inst: Inst) -> &mut [Value] {
-        let num_fixed_args = self.insts[inst]
-            .opcode()
-            .constraints()
-            .num_fixed_value_arguments();
-        &mut self.inst_args_mut(inst)[..num_fixed_args]
-    }
-
-    /// Get the variable value arguments on `inst` as a slice.
-    pub fn inst_variable_args(&self, inst: Inst) -> &[Value] {
-        let num_fixed_args = self.insts[inst]
-            .opcode()
-            .constraints()
-            .num_fixed_value_arguments();
-        &self.inst_args(inst)[num_fixed_args..]
-    }
-
-    /// Get the variable value arguments on `inst` as a mutable slice.
-    pub fn inst_variable_args_mut(&mut self, inst: Inst) -> &mut [Value] {
-        let num_fixed_args = self.insts[inst]
-            .opcode()
-            .constraints()
-            .num_fixed_value_arguments();
-        &mut self.inst_args_mut(inst)[num_fixed_args..]
-    }
-
-    /// Create result values for an instruction that produces multiple results.
-    ///
-    /// Instructions that produce no result values only need to be created with `make_inst`,
-    /// otherwise call `make_inst_results` to allocate value table entries for the results.
-    ///
-    /// The result value types are determined from the instruction's value type constraints and the
-    /// provided `ctrl_typevar` type for polymorphic instructions. For non-polymorphic
-    /// instructions, `ctrl_typevar` is ignored, and `INVALID` can be used.
-    ///
-    /// The type of the first result value is also set, even if it was already set in the
-    /// `InstructionData` passed to `make_inst`. If this function is called with a single-result
-    /// instruction, that is the only effect.
-    pub fn make_inst_results(&mut self, inst: Inst, ctrl_typevar: Type) -> usize {
-        self.make_inst_results_reusing(inst, ctrl_typevar, iter::empty())
-    }
-
-    /// Create result values for `inst`, reusing the provided detached values.
-    ///
-    /// Create a new set of result values for `inst` using `ctrl_typevar` to determine the result
-    /// types. Any values provided by `reuse` will be reused. When `reuse` is exhausted or when it
-    /// produces `None`, a new value is created.
-    pub fn make_inst_results_reusing<I>(
-        &mut self,
-        inst: Inst,
-        ctrl_typevar: Type,
-        reuse: I,
-    ) -> usize
-    where
-        I: Iterator<Item = Option<Value>>,
-    {
-        self.results[inst].clear(&mut self.value_lists);
-
-        let mut reuse = reuse.fuse();
-        let result_tys: SmallVec<[_; 16]> = self.inst_result_types(inst, ctrl_typevar).collect();
-        let num_results = result_tys.len();
-
-        for ty in result_tys {
-            if let Some(Some(v)) = reuse.next() {
-                debug_assert_eq!(self.value_type(v), ty, "Reused {} is wrong type", ty);
-                self.attach_result(inst, v);
-            } else {
-                self.append_result(inst, ty);
-            }
-        }
-
-        num_results
-    }
-
-    /// Create a `ReplaceBuilder` that will replace `inst` with a new instruction in place.
-    pub fn replace(&mut self, inst: Inst) -> ReplaceBuilder {
-        ReplaceBuilder::new(self, inst)
-    }
-
-    /// Detach the list of result values from `inst` and return it.
-    ///
-    /// This leaves `inst` without any result values. New result values can be created by calling
-    /// `make_inst_results` or by using a `replace(inst)` builder.
-    pub fn detach_results(&mut self, inst: Inst) -> ValueList {
-        self.results[inst].take()
-    }
-
-    /// Clear the list of result values from `inst`.
-    ///
-    /// This leaves `inst` without any result values. New result values can be created by calling
-    /// `make_inst_results` or by using a `replace(inst)` builder.
-    pub fn clear_results(&mut self, inst: Inst) {
-        self.results[inst].clear(&mut self.value_lists)
-    }
-
-    /// Attach an existing value to the result value list for `inst`.
-    ///
-    /// The `res` value is appended to the end of the result list.
-    ///
-    /// This is a very low-level operation. Usually, instruction results with the correct types are
-    /// created automatically. The `res` value must not be attached to anything else.
-    pub fn attach_result(&mut self, inst: Inst, res: Value) {
-        debug_assert!(!self.value_is_attached(res));
-        let num = self.results[inst].push(res, &mut self.value_lists);
-        debug_assert!(num <= u16::MAX as usize, "Too many result values");
-        let ty = self.value_type(res);
-        self.values[res] = ValueData::Inst {
-            ty,
-            num: num as u16,
-            inst,
-        }
-        .into();
-    }
-
-    /// Replace an instruction result with a new value of type `new_type`.
-    ///
-    /// The `old_value` must be an attached instruction result.
-    ///
-    /// The old value is left detached, so it should probably be changed into something else.
-    ///
-    /// Returns the new value.
-    pub fn replace_result(&mut self, old_value: Value, new_type: Type) -> Value {
-        let (num, inst) = match ValueData::from(self.values[old_value]) {
-            ValueData::Inst { num, inst, .. } => (num, inst),
-            _ => panic!("{} is not an instruction result value", old_value),
-        };
-        let new_value = self.make_value(ValueData::Inst {
-            ty: new_type,
-            num,
-            inst,
-        });
-        let num = num as usize;
-        let attached = mem::replace(
-            self.results[inst]
-                .get_mut(num, &mut self.value_lists)
-                .expect("Replacing detached result"),
-            new_value,
-        );
-        debug_assert_eq!(
-            attached,
-            old_value,
-            "{} wasn't detached from {}",
-            old_value,
-            self.display_inst(inst)
-        );
-        new_value
-    }
-
-    /// Append a new instruction result value to `inst`.
-    pub fn append_result(&mut self, inst: Inst, ty: Type) -> Value {
-        let res = self.values.next_key();
-        let num = self.results[inst].push(res, &mut self.value_lists);
-        debug_assert!(num <= u16::MAX as usize, "Too many result values");
-        self.make_value(ValueData::Inst {
-            ty,
-            inst,
-            num: num as u16,
-        })
-    }
-
-    /// Clone an instruction, attaching new result `Value`s and
-    /// returning them.
-    pub fn clone_inst(&mut self, inst: Inst) -> Inst {
-        // First, add a clone of the InstructionData.
-        let inst_data = self.insts[inst].clone();
-        // If the `inst_data` has a reference to a ValueList, clone it
-        // as well, because we can't share these (otherwise mutating
-        // one would affect the other).
-        let inst_data = inst_data.deep_clone(&mut self.value_lists);
-        let new_inst = self.make_inst(inst_data);
-        // Get the controlling type variable.
-        let ctrl_typevar = self.ctrl_typevar(inst);
-        // Create new result values.
-        let num_results = self.make_inst_results(new_inst, ctrl_typevar);
-        // Copy over PCC facts, if any.
-        for i in 0..num_results {
-            let old_result = self.inst_results(inst)[i];
-            let new_result = self.inst_results(new_inst)[i];
-            self.facts[new_result] = self.facts[old_result].clone();
-        }
-        new_inst
-    }
-
-    /// Get the first result of an instruction.
-    ///
-    /// This function panics if the instruction doesn't have any result.
-    pub fn first_result(&self, inst: Inst) -> Value {
-        self.results[inst]
-            .first(&self.value_lists)
-            .expect("Instruction has no results")
-    }
-
-    /// Test if `inst` has any result values currently.
-    pub fn has_results(&self, inst: Inst) -> bool {
-        !self.results[inst].is_empty()
-    }
-
-    /// Return all the results of an instruction.
-    pub fn inst_results(&self, inst: Inst) -> &[Value] {
-        self.results[inst].as_slice(&self.value_lists)
-    }
-
-    /// Return all the results of an instruction as ValueList.
-    pub fn inst_results_list(&self, inst: Inst) -> ValueList {
-        self.results[inst]
-    }
-
-    /// Create a union of two values.
-    pub fn union(&mut self, x: Value, y: Value) -> Value {
-        // Get the type.
-        let ty = self.value_type(x);
-        debug_assert_eq!(ty, self.value_type(y));
-        self.make_value(ValueData::Union { ty, x, y })
-    }
-
-    /// Get the call signature of a direct or indirect call instruction.
-    /// Returns `None` if `inst` is not a call instruction.
-    pub fn call_signature(&self, inst: Inst) -> Option<SigRef> {
-        match self.insts[inst].analyze_call(&self.value_lists) {
-            CallInfo::NotACall => None,
-            CallInfo::Direct(f, _) => Some(self.ext_funcs[f].signature),
-            CallInfo::Indirect(s, _) => Some(s),
-        }
-    }
-
-    /// Like `call_signature` but returns none for tail call instructions.
-    fn non_tail_call_signature(&self, inst: Inst) -> Option<SigRef> {
-        let sig = self.call_signature(inst)?;
-        match self.insts[inst].opcode() {
-            ir::Opcode::ReturnCall | ir::Opcode::ReturnCallIndirect => None,
-            _ => Some(sig),
-        }
-    }
-
-    // Only for use by the verifier. Everyone else should just use
-    // `dfg.inst_results(inst).len()`.
-    pub(crate) fn num_expected_results_for_verifier(&self, inst: Inst) -> usize {
-        match self.non_tail_call_signature(inst) {
-            Some(sig) => self.signatures[sig].returns.len(),
-            None => {
-                let constraints = self.insts[inst].opcode().constraints();
-                constraints.num_fixed_results()
-            }
-        }
-    }
-
-    /// Get the result types of the given instruction.
-    pub fn inst_result_types<'a>(
-        &'a self,
-        inst: Inst,
-        ctrl_typevar: Type,
-    ) -> impl iter::ExactSizeIterator<Item = Type> + 'a {
-        return match self.non_tail_call_signature(inst) {
-            Some(sig) => InstResultTypes::Signature(self, sig, 0),
-            None => {
-                let constraints = self.insts[inst].opcode().constraints();
-                InstResultTypes::Constraints(constraints, ctrl_typevar, 0)
-            }
-        };
-
-        enum InstResultTypes<'a> {
-            Signature(&'a DataFlowGraph, SigRef, usize),
-            Constraints(ir::instructions::OpcodeConstraints, Type, usize),
-        }
-
-        impl Iterator for InstResultTypes<'_> {
-            type Item = Type;
-
-            fn next(&mut self) -> Option<Type> {
-                match self {
-                    InstResultTypes::Signature(dfg, sig, i) => {
-                        let param = dfg.signatures[*sig].returns.get(*i)?;
-                        *i += 1;
-                        Some(param.value_type)
-                    }
-                    InstResultTypes::Constraints(constraints, ctrl_ty, i) => {
-                        if *i < constraints.num_fixed_results() {
-                            let ty = constraints.result_type(*i, *ctrl_ty);
-                            *i += 1;
-                            Some(ty)
-                        } else {
-                            None
-                        }
-                    }
-                }
-            }
-
-            fn size_hint(&self) -> (usize, Option<usize>) {
-                let len = match self {
-                    InstResultTypes::Signature(dfg, sig, i) => {
-                        dfg.signatures[*sig].returns.len() - *i
-                    }
-                    InstResultTypes::Constraints(constraints, _, i) => {
-                        constraints.num_fixed_results() - *i
-                    }
-                };
-                (len, Some(len))
-            }
-        }
-
-        impl ExactSizeIterator for InstResultTypes<'_> {}
-    }
-
-    /// Compute the type of an instruction result from opcode constraints and call signatures.
-    ///
-    /// This computes the same sequence of result types that `make_inst_results()` above would
-    /// assign to the created result values, but it does not depend on `make_inst_results()` being
-    /// called first.
-    ///
-    /// Returns `None` if asked about a result index that is too large.
-    pub fn compute_result_type(
-        &self,
-        inst: Inst,
-        result_idx: usize,
-        ctrl_typevar: Type,
-    ) -> Option<Type> {
-        self.inst_result_types(inst, ctrl_typevar).nth(result_idx)
-    }
-
-    /// Get the controlling type variable, or `INVALID` if `inst` isn't polymorphic.
-    pub fn ctrl_typevar(&self, inst: Inst) -> Type {
-        let constraints = self.insts[inst].opcode().constraints();
-
-        if !constraints.is_polymorphic() {
-            types::INVALID
-        } else if constraints.requires_typevar_operand() {
-            // Not all instruction formats have a designated operand, but in that case
-            // `requires_typevar_operand()` should never be true.
-            self.value_type(
-                self.insts[inst]
-                    .typevar_operand(&self.value_lists)
-                    .unwrap_or_else(|| {
-                        panic!(
-                            "Instruction format for {:?} doesn't have a designated operand",
-                            self.insts[inst]
-                        )
-                    }),
-            )
-        } else {
-            self.value_type(self.first_result(inst))
-        }
-    }
-}
-
-/// basic blocks.
-impl DataFlowGraph {
-    /// Create a new basic block.
-    pub fn make_block(&mut self) -> Block {
-        self.blocks.add()
-    }
-
-    /// Get the number of parameters on `block`.
-    pub fn num_block_params(&self, block: Block) -> usize {
-        self.blocks[block].params(&self.value_lists).len()
-    }
-
-    /// Get the parameters on `block`.
-    pub fn block_params(&self, block: Block) -> &[Value] {
-        self.blocks[block].params(&self.value_lists)
-    }
-
-    /// Get the types of the parameters on `block`.
-    pub fn block_param_types(&self, block: Block) -> impl Iterator<Item = Type> + '_ {
-        self.block_params(block).iter().map(|&v| self.value_type(v))
-    }
-
-    /// Append a parameter with type `ty` to `block`.
-    pub fn append_block_param(&mut self, block: Block, ty: Type) -> Value {
-        let param = self.values.next_key();
-        let num = self.blocks[block].params.push(param, &mut self.value_lists);
-        debug_assert!(num <= u16::MAX as usize, "Too many parameters on block");
-        self.make_value(ValueData::Param {
-            ty,
-            num: num as u16,
-            block,
-        })
-    }
-
-    /// Removes `val` from `block`'s parameters by swapping it with the last parameter on `block`.
-    /// Returns the position of `val` before removal.
-    ///
-    /// *Important*: to ensure O(1) deletion, this method swaps the removed parameter with the
-    /// last `block` parameter. This can disrupt all the branch instructions jumping to this
-    /// `block` for which you have to change the branch argument order if necessary.
-    ///
-    /// Panics if `val` is not a block parameter.
-    pub fn swap_remove_block_param(&mut self, val: Value) -> usize {
-        let (block, num) =
-            if let ValueData::Param { num, block, .. } = ValueData::from(self.values[val]) {
-                (block, num)
-            } else {
-                panic!("{} must be a block parameter", val);
-            };
-        self.blocks[block]
-            .params
-            .swap_remove(num as usize, &mut self.value_lists);
-        if let Some(last_arg_val) = self.blocks[block]
-            .params
-            .get(num as usize, &self.value_lists)
-        {
-            // We update the position of the old last arg.
-            let mut last_arg_data = ValueData::from(self.values[last_arg_val]);
-            if let ValueData::Param {
-                num: ref mut old_num,
-                ..
-            } = &mut last_arg_data
-            {
-                *old_num = num;
-                self.values[last_arg_val] = last_arg_data.into();
-            } else {
-                panic!("{} should be a Block parameter", last_arg_val);
-            }
-        }
-        num as usize
-    }
-
-    /// Removes `val` from `block`'s parameters by a standard linear time list removal which
-    /// preserves ordering. Also updates the values' data.
-    pub fn remove_block_param(&mut self, val: Value) {
-        let (block, num) =
-            if let ValueData::Param { num, block, .. } = ValueData::from(self.values[val]) {
-                (block, num)
-            } else {
-                panic!("{} must be a block parameter", val);
-            };
-        self.blocks[block]
-            .params
-            .remove(num as usize, &mut self.value_lists);
-        for index in num..(self.num_block_params(block) as u16) {
-            let packed = &mut self.values[self.blocks[block]
-                .params
-                .get(index as usize, &self.value_lists)
-                .unwrap()];
-            let mut data = ValueData::from(*packed);
-            match &mut data {
-                ValueData::Param { ref mut num, .. } => {
-                    *num -= 1;
-                    *packed = data.into();
-                }
-                _ => panic!(
-                    "{} must be a block parameter",
-                    self.blocks[block]
-                        .params
-                        .get(index as usize, &self.value_lists)
-                        .unwrap()
-                ),
-            }
-        }
-    }
-
-    /// Append an existing value to `block`'s parameters.
-    ///
-    /// The appended value can't already be attached to something else.
-    ///
-    /// In almost all cases, you should be using `append_block_param()` instead of this method.
-    pub fn attach_block_param(&mut self, block: Block, param: Value) {
-        debug_assert!(!self.value_is_attached(param));
-        let num = self.blocks[block].params.push(param, &mut self.value_lists);
-        debug_assert!(num <= u16::MAX as usize, "Too many parameters on block");
-        let ty = self.value_type(param);
-        self.values[param] = ValueData::Param {
-            ty,
-            num: num as u16,
-            block,
-        }
-        .into();
-    }
-
-    /// Replace a block parameter with a new value of type `ty`.
-    ///
-    /// The `old_value` must be an attached block parameter. It is removed from its place in the list
-    /// of parameters and replaced by a new value of type `new_type`. The new value gets the same
-    /// position in the list, and other parameters are not disturbed.
-    ///
-    /// The old value is left detached, so it should probably be changed into something else.
-    ///
-    /// Returns the new value.
-    pub fn replace_block_param(&mut self, old_value: Value, new_type: Type) -> Value {
-        // Create new value identical to the old one except for the type.
-        let (block, num) =
-            if let ValueData::Param { num, block, .. } = ValueData::from(self.values[old_value]) {
-                (block, num)
-            } else {
-                panic!("{} must be a block parameter", old_value);
-            };
-        let new_arg = self.make_value(ValueData::Param {
-            ty: new_type,
-            num,
-            block,
-        });
-
-        self.blocks[block]
-            .params
-            .as_mut_slice(&mut self.value_lists)[num as usize] = new_arg;
-        new_arg
-    }
-
-    /// Detach all the parameters from `block` and return them as a `ValueList`.
-    ///
-    /// This is a quite low-level operation. Sensible things to do with the detached block parameters
-    /// is to put them back on the same block with `attach_block_param()` or change them into aliases
-    /// with `change_to_alias()`.
-    pub fn detach_block_params(&mut self, block: Block) -> ValueList {
-        self.blocks[block].params.take()
-    }
-
-    /// Merge the facts for two values. If both values have facts and
-    /// they differ, both values get a special "conflict" fact that is
-    /// never satisfied.
-    pub fn merge_facts(&mut self, a: Value, b: Value) {
-        let a = self.resolve_aliases(a);
-        let b = self.resolve_aliases(b);
-        match (&self.facts[a], &self.facts[b]) {
-            (Some(a), Some(b)) if a == b => { /* nothing */ }
-            (None, None) => { /* nothing */ }
-            (Some(a), None) => {
-                self.facts[b] = Some(a.clone());
-            }
-            (None, Some(b)) => {
-                self.facts[a] = Some(b.clone());
-            }
-            (Some(a_fact), Some(b_fact)) => {
-                assert_eq!(self.value_type(a), self.value_type(b));
-                let merged = Fact::intersect(a_fact, b_fact);
-                crate::trace!(
-                    "facts merge on {} and {}: {:?}, {:?} -> {:?}",
-                    a,
-                    b,
-                    a_fact,
-                    b_fact,
-                    merged,
-                );
-                self.facts[a] = Some(merged.clone());
-                self.facts[b] = Some(merged);
-            }
-        }
-    }
-}
-
-/// Contents of a basic block.
-///
-/// Parameters on a basic block are values that dominate everything in the block. All
-/// branches to this block must provide matching arguments, and the arguments to the entry block must
-/// match the function arguments.
-#[derive(Clone, PartialEq, Hash)]
-#[cfg_attr(feature = "enable-serde", derive(Serialize, Deserialize))]
-pub struct BlockData {
-    /// List of parameters to this block.
-    params: ValueList,
-}
-
-impl BlockData {
-    fn new() -> Self {
-        Self {
-            params: ValueList::new(),
-        }
-    }
-
-    /// Get the parameters on `block`.
-    pub fn params<'a>(&self, pool: &'a ValueListPool) -> &'a [Value] {
-        self.params.as_slice(pool)
-    }
-}
-
-/// Object that can display an instruction.
-pub struct DisplayInst<'a>(&'a DataFlowGraph, Inst);
-
-impl<'a> fmt::Display for DisplayInst<'a> {
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
-        let dfg = self.0;
-        let inst = self.1;
-
-        if let Some((first, rest)) = dfg.inst_results(inst).split_first() {
-            write!(f, "{}", first)?;
-            for v in rest {
-                write!(f, ", {}", v)?;
-            }
-            write!(f, " = ")?;
-        }
-
-        let typevar = dfg.ctrl_typevar(inst);
-        if typevar.is_invalid() {
-            write!(f, "{}", dfg.insts[inst].opcode())?;
-        } else {
-            write!(f, "{}.{}", dfg.insts[inst].opcode(), typevar)?;
-        }
-        write_operands(f, dfg, inst)
-    }
-}
-
-/// Parser routines. These routines should not be used outside the parser.
-impl DataFlowGraph {
-    /// Set the type of a value. This is only for use in the parser, which needs
-    /// to create invalid values for index padding which may be reassigned later.
-    #[cold]
-    fn set_value_type_for_parser(&mut self, v: Value, t: Type) {
-        assert_eq!(
-            self.value_type(v),
-            types::INVALID,
-            "this function is only for assigning types to previously invalid values"
-        );
-        self.values[v].set_type(t);
-    }
-
-    /// Check that the given concrete `Type` has been defined in the function.
-    pub fn check_dynamic_type(&mut self, ty: Type) -> Option<Type> {
-        debug_assert!(ty.is_dynamic_vector());
-        if self
-            .dynamic_types
-            .values()
-            .any(|dyn_ty_data| dyn_ty_data.concrete().unwrap() == ty)
-        {
-            Some(ty)
-        } else {
-            None
-        }
-    }
-
-    /// Create result values for `inst`, reusing the provided detached values.
-    /// This is similar to `make_inst_results_reusing` except it's only for use
-    /// in the parser, which needs to reuse previously invalid values.
-    #[cold]
-    pub fn make_inst_results_for_parser(
-        &mut self,
-        inst: Inst,
-        ctrl_typevar: Type,
-        reuse: &[Value],
-    ) -> usize {
-        let mut reuse_iter = reuse.iter().copied();
-        let result_tys: SmallVec<[_; 16]> = self.inst_result_types(inst, ctrl_typevar).collect();
-        for ty in result_tys {
-            if ty.is_dynamic_vector() {
-                self.check_dynamic_type(ty)
-                    .unwrap_or_else(|| panic!("Use of undeclared dynamic type: {}", ty));
-            }
-            if let Some(v) = reuse_iter.next() {
-                self.set_value_type_for_parser(v, ty);
-            }
-        }
-
-        self.make_inst_results_reusing(inst, ctrl_typevar, reuse.iter().map(|x| Some(*x)))
-    }
-
-    /// Similar to `append_block_param`, append a parameter with type `ty` to
-    /// `block`, but using value `val`. This is only for use by the parser to
-    /// create parameters with specific values.
-    #[cold]
-    pub fn append_block_param_for_parser(&mut self, block: Block, ty: Type, val: Value) {
-        let num = self.blocks[block].params.push(val, &mut self.value_lists);
-        assert!(num <= u16::MAX as usize, "Too many parameters on block");
-        self.values[val] = ValueData::Param {
-            ty,
-            num: num as u16,
-            block,
-        }
-        .into();
-    }
-
-    /// Create a new value alias. This is only for use by the parser to create
-    /// aliases with specific values, and the printer for testing.
-    #[cold]
-    pub fn make_value_alias_for_serialization(&mut self, src: Value, dest: Value) {
-        assert_ne!(src, Value::reserved_value());
-        assert_ne!(dest, Value::reserved_value());
-
-        let ty = if self.values.is_valid(src) {
-            self.value_type(src)
-        } else {
-            // As a special case, if we can't resolve the aliasee yet, use INVALID
-            // temporarily. It will be resolved later in parsing.
-            types::INVALID
-        };
-        let data = ValueData::Alias { ty, original: src };
-        self.values[dest] = data.into();
-    }
-
-    /// If `v` is already defined as an alias, return its destination value.
-    /// Otherwise return None. This allows the parser to coalesce identical
-    /// alias definitions, and the printer to identify an alias's immediate target.
-    #[cold]
-    pub fn value_alias_dest_for_serialization(&self, v: Value) -> Option<Value> {
-        if let ValueData::Alias { original, .. } = ValueData::from(self.values[v]) {
-            Some(original)
-        } else {
-            None
-        }
-    }
-
-    /// Compute the type of an alias. This is only for use in the parser.
-    /// Returns false if an alias cycle was encountered.
-    #[cold]
-    pub fn set_alias_type_for_parser(&mut self, v: Value) -> bool {
-        if let Some(resolved) = maybe_resolve_aliases(&self.values, v) {
-            let old_ty = self.value_type(v);
-            let new_ty = self.value_type(resolved);
-            if old_ty == types::INVALID {
-                self.set_value_type_for_parser(v, new_ty);
-            } else {
-                assert_eq!(old_ty, new_ty);
-            }
-            true
-        } else {
-            false
-        }
-    }
-
-    /// Create an invalid value, to pad the index space. This is only for use by
-    /// the parser to pad out the value index space.
-    #[cold]
-    pub fn make_invalid_value_for_parser(&mut self) {
-        let data = ValueData::Alias {
-            ty: types::INVALID,
-            original: Value::reserved_value(),
-        };
-        self.make_value(data);
-    }
-
-    /// Check if a value reference is valid, while being aware of aliases which
-    /// may be unresolved while parsing.
-    #[cold]
-    pub fn value_is_valid_for_parser(&self, v: Value) -> bool {
-        if !self.value_is_valid(v) {
-            return false;
-        }
-        if let ValueData::Alias { ty, .. } = ValueData::from(self.values[v]) {
-            ty != types::INVALID
-        } else {
-            true
-        }
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use super::*;
-    use crate::cursor::{Cursor, FuncCursor};
-    use crate::ir::types;
-    use crate::ir::{Function, InstructionData, Opcode, TrapCode};
-    use alloc::string::ToString;
-
-    #[test]
-    fn make_inst() {
-        let mut dfg = DataFlowGraph::new();
-
-        let idata = InstructionData::UnaryImm {
-            opcode: Opcode::Iconst,
-            imm: 0.into(),
-        };
-        let inst = dfg.make_inst(idata);
-
-        dfg.make_inst_results(inst, types::I32);
-        assert_eq!(inst.to_string(), "inst0");
-        assert_eq!(dfg.display_inst(inst).to_string(), "v0 = iconst.i32 0");
-
-        // Immutable reference resolution.
-        {
-            let immdfg = &dfg;
-            let ins = &immdfg.insts[inst];
-            assert_eq!(ins.opcode(), Opcode::Iconst);
-        }
-
-        // Results.
-        let val = dfg.first_result(inst);
-        assert_eq!(dfg.inst_results(inst), &[val]);
-
-        assert_eq!(dfg.value_def(val), ValueDef::Result(inst, 0));
-        assert_eq!(dfg.value_type(val), types::I32);
-
-        // Replacing results.
-        assert!(dfg.value_is_attached(val));
-        let v2 = dfg.replace_result(val, types::F64);
-        assert!(!dfg.value_is_attached(val));
-        assert!(dfg.value_is_attached(v2));
-        assert_eq!(dfg.inst_results(inst), &[v2]);
-        assert_eq!(dfg.value_def(v2), ValueDef::Result(inst, 0));
-        assert_eq!(dfg.value_type(v2), types::F64);
-    }
-
-    #[test]
-    fn no_results() {
-        let mut dfg = DataFlowGraph::new();
-
-        let idata = InstructionData::Trap {
-            opcode: Opcode::Trap,
-            code: TrapCode::User(0),
-        };
-        let inst = dfg.make_inst(idata);
-        assert_eq!(dfg.display_inst(inst).to_string(), "trap user0");
-
-        // Result slice should be empty.
-        assert_eq!(dfg.inst_results(inst), &[]);
-    }
-
-    #[test]
-    fn block() {
-        let mut dfg = DataFlowGraph::new();
-
-        let block = dfg.make_block();
-        assert_eq!(block.to_string(), "block0");
-        assert_eq!(dfg.num_block_params(block), 0);
-        assert_eq!(dfg.block_params(block), &[]);
-        assert!(dfg.detach_block_params(block).is_empty());
-        assert_eq!(dfg.num_block_params(block), 0);
-        assert_eq!(dfg.block_params(block), &[]);
-
-        let arg1 = dfg.append_block_param(block, types::F32);
-        assert_eq!(arg1.to_string(), "v0");
-        assert_eq!(dfg.num_block_params(block), 1);
-        assert_eq!(dfg.block_params(block), &[arg1]);
-
-        let arg2 = dfg.append_block_param(block, types::I16);
-        assert_eq!(arg2.to_string(), "v1");
-        assert_eq!(dfg.num_block_params(block), 2);
-        assert_eq!(dfg.block_params(block), &[arg1, arg2]);
-
-        assert_eq!(dfg.value_def(arg1), ValueDef::Param(block, 0));
-        assert_eq!(dfg.value_def(arg2), ValueDef::Param(block, 1));
-        assert_eq!(dfg.value_type(arg1), types::F32);
-        assert_eq!(dfg.value_type(arg2), types::I16);
-
-        // Swap the two block parameters.
-        let vlist = dfg.detach_block_params(block);
-        assert_eq!(dfg.num_block_params(block), 0);
-        assert_eq!(dfg.block_params(block), &[]);
-        assert_eq!(vlist.as_slice(&dfg.value_lists), &[arg1, arg2]);
-        dfg.attach_block_param(block, arg2);
-        let arg3 = dfg.append_block_param(block, types::I32);
-        dfg.attach_block_param(block, arg1);
-        assert_eq!(dfg.block_params(block), &[arg2, arg3, arg1]);
-    }
-
-    #[test]
-    fn replace_block_params() {
-        let mut dfg = DataFlowGraph::new();
-
-        let block = dfg.make_block();
-        let arg1 = dfg.append_block_param(block, types::F32);
-
-        let new1 = dfg.replace_block_param(arg1, types::I64);
-        assert_eq!(dfg.value_type(arg1), types::F32);
-        assert_eq!(dfg.value_type(new1), types::I64);
-        assert_eq!(dfg.block_params(block), &[new1]);
-
-        dfg.attach_block_param(block, arg1);
-        assert_eq!(dfg.block_params(block), &[new1, arg1]);
-
-        let new2 = dfg.replace_block_param(arg1, types::I8);
-        assert_eq!(dfg.value_type(arg1), types::F32);
-        assert_eq!(dfg.value_type(new2), types::I8);
-        assert_eq!(dfg.block_params(block), &[new1, new2]);
-
-        dfg.attach_block_param(block, arg1);
-        assert_eq!(dfg.block_params(block), &[new1, new2, arg1]);
-
-        let new3 = dfg.replace_block_param(new2, types::I16);
-        assert_eq!(dfg.value_type(new1), types::I64);
-        assert_eq!(dfg.value_type(new2), types::I8);
-        assert_eq!(dfg.value_type(new3), types::I16);
-        assert_eq!(dfg.block_params(block), &[new1, new3, arg1]);
-    }
-
-    #[test]
-    fn swap_remove_block_params() {
-        let mut dfg = DataFlowGraph::new();
-
-        let block = dfg.make_block();
-        let arg1 = dfg.append_block_param(block, types::F32);
-        let arg2 = dfg.append_block_param(block, types::F32);
-        let arg3 = dfg.append_block_param(block, types::F32);
-        assert_eq!(dfg.block_params(block), &[arg1, arg2, arg3]);
-
-        dfg.swap_remove_block_param(arg1);
-        assert_eq!(dfg.value_is_attached(arg1), false);
-        assert_eq!(dfg.value_is_attached(arg2), true);
-        assert_eq!(dfg.value_is_attached(arg3), true);
-        assert_eq!(dfg.block_params(block), &[arg3, arg2]);
-        dfg.swap_remove_block_param(arg2);
-        assert_eq!(dfg.value_is_attached(arg2), false);
-        assert_eq!(dfg.value_is_attached(arg3), true);
-        assert_eq!(dfg.block_params(block), &[arg3]);
-        dfg.swap_remove_block_param(arg3);
-        assert_eq!(dfg.value_is_attached(arg3), false);
-        assert_eq!(dfg.block_params(block), &[]);
-    }
-
-    #[test]
-    fn aliases() {
-        use crate::ir::condcodes::IntCC;
-        use crate::ir::InstBuilder;
-
-        let mut func = Function::new();
-        let block0 = func.dfg.make_block();
-        let mut pos = FuncCursor::new(&mut func);
-        pos.insert_block(block0);
-
-        // Build a little test program.
-        let v1 = pos.ins().iconst(types::I32, 42);
-
-        // Make sure we can resolve value aliases even when values is empty.
-        assert_eq!(pos.func.dfg.resolve_aliases(v1), v1);
-
-        let arg0 = pos.func.dfg.append_block_param(block0, types::I32);
-        let (s, c) = pos.ins().uadd_overflow(v1, arg0);
-        let iadd = match pos.func.dfg.value_def(s) {
-            ValueDef::Result(i, 0) => i,
-            _ => panic!(),
-        };
-
-        // Remove `c` from the result list.
-        pos.func.dfg.clear_results(iadd);
-        pos.func.dfg.attach_result(iadd, s);
-
-        // Replace `uadd_overflow` with a normal `iadd` and an `icmp`.
-        pos.func.dfg.replace(iadd).iadd(v1, arg0);
-        let c2 = pos.ins().icmp(IntCC::Equal, s, v1);
-        pos.func.dfg.change_to_alias(c, c2);
-
-        assert_eq!(pos.func.dfg.resolve_aliases(c2), c2);
-        assert_eq!(pos.func.dfg.resolve_aliases(c), c2);
-    }
-
-    #[test]
-    fn cloning() {
-        use crate::ir::InstBuilder;
-
-        let mut func = Function::new();
-        let mut sig = Signature::new(crate::isa::CallConv::SystemV);
-        sig.params.push(ir::AbiParam::new(types::I32));
-        let sig = func.import_signature(sig);
-        let block0 = func.dfg.make_block();
-        let mut pos = FuncCursor::new(&mut func);
-        pos.insert_block(block0);
-        let v1 = pos.ins().iconst(types::I32, 0);
-        let v2 = pos.ins().iconst(types::I32, 1);
-        let call_inst = pos.ins().call_indirect(sig, v1, &[v1]);
-        let func = pos.func;
-
-        let call_inst_dup = func.dfg.clone_inst(call_inst);
-        func.dfg.inst_args_mut(call_inst)[0] = v2;
-        assert_eq!(v1, func.dfg.inst_args(call_inst_dup)[0]);
-    }
-}