trackler 2.2.0.4 → 2.2.0.5

data/tracks/ruby/exercises/bracket-push/README.md

@@ -0,0 +1,36 @@
+# Bracket Push
+
+Given a string containing brackets `[]`, braces `{}` and parentheses `()`,
+verify that all the pairs are matched and nested correctly.
+
+* * * *
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/ruby).
+
+For running the tests provided, you will need the Minitest gem. Open a
+terminal window and run the following command to install minitest:
+
+    gem install minitest
+
+If you would like color output, you can `require 'minitest/pride'` in
+the test file, or note the alternative instruction, below, for running
+the test file.
+
+In order to run the test, you can run the test file from the exercise
+directory. For example, if the test suite is called
+`hello_world_test.rb`, you can run the following command:
+
+    ruby hello_world_test.rb
+
+To include color from the command line:
+
+    ruby -r minitest/pride hello_world_test.rb
+
+
+## Source
+
+Ginna Baker
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/ruby/exercises/circular-buffer/README.md

@@ -0,0 +1,76 @@
+# Circular Buffer
+
+A circular buffer, cyclic buffer or ring buffer is a data structure that
+uses a single, fixed-size buffer as if it were connected end-to-end.
+
+A circular buffer first starts empty and of some predefined length. For
+example, this is a 7-element buffer:
+
+    [ ][ ][ ][ ][ ][ ][ ]
+
+Assume that a 1 is written into the middle of the buffer (exact starting
+location does not matter in a circular buffer):
+
+    [ ][ ][ ][1][ ][ ][ ]
+
+Then assume that two more elements are added — 2 & 3 — which get
+appended after the 1:
+
+    [ ][ ][ ][1][2][3][ ]
+
+If two elements are then removed from the buffer, the oldest values
+inside the buffer are removed. The two elements removed, in this case,
+are 1 & 2, leaving the buffer with just a 3:
+
+    [ ][ ][ ][ ][ ][3][ ]
+
+If the buffer has 7 elements then it is completely full:
+
+    [6][7][8][9][3][4][5]
+
+When the buffer is full an error will be raised, alerting the client
+that further writes are blocked until a slot becomes free.
+
+The client can opt to overwrite the oldest data with a forced write. In
+this case, two more elements — A & B — are added and they overwrite the
+3 & 4:
+
+    [6][7][8][9][A][B][5]
+
+Finally, if two elements are now removed then what would be returned is
+not 3 & 4 but 5 & 6 because A & B overwrote the 3 & the 4 yielding the
+buffer with:
+
+    [ ][7][8][9][A][B][ ]
+
+* * * *
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/ruby).
+
+For running the tests provided, you will need the Minitest gem. Open a
+terminal window and run the following command to install minitest:
+
+    gem install minitest
+
+If you would like color output, you can `require 'minitest/pride'` in
+the test file, or note the alternative instruction, below, for running
+the test file.
+
+In order to run the test, you can run the test file from the exercise
+directory. For example, if the test suite is called
+`hello_world_test.rb`, you can run the following command:
+
+    ruby hello_world_test.rb
+
+To include color from the command line:
+
+    ruby -r minitest/pride hello_world_test.rb
+
+
+## Source
+
+Wikipedia [http://en.wikipedia.org/wiki/Circular_buffer](http://en.wikipedia.org/wiki/Circular_buffer)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/ruby/exercises/clock/README.md

@@ -0,0 +1,39 @@
+# Clock
+
+Implement a clock that handles times without dates.
+
+You should be able to add and subtract minutes to it.
+
+Two clocks that represent the same time should be equal to each other.
+
+* * * *
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/ruby).
+
+For running the tests provided, you will need the Minitest gem. Open a
+terminal window and run the following command to install minitest:
+
+    gem install minitest
+
+If you would like color output, you can `require 'minitest/pride'` in
+the test file, or note the alternative instruction, below, for running
+the test file.
+
+In order to run the test, you can run the test file from the exercise
+directory. For example, if the test suite is called
+`hello_world_test.rb`, you can run the following command:
+
+    ruby hello_world_test.rb
+
+To include color from the command line:
+
+    ruby -r minitest/pride hello_world_test.rb
+
+
+## Source
+
+Pairing session with Erin Drummond [https://twitter.com/ebdrummond](https://twitter.com/ebdrummond)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/ruby/exercises/collatz-conjecture/README.md

@@ -0,0 +1,59 @@
+# Collatz Conjecture
+
+The Collatz Conjecture or 3x+1 problem can be summarized as follows:
+
+Take any positive integer n. If n is even, divide n by 2 to get n / 2. If n is
+odd, multiply n by 3 and add 1 to get 3n + 1. Repeat the process indefinitely.
+The conjecture states that no matter which number you start with, you will
+always reach 1 eventually.
+
+Given a number n, return the number of steps required to reach 1.
+
+## Examples
+Starting with n = 12, the steps would be as follows:
+
+0. 12
+1. 6
+2. 3
+3. 10
+4. 5
+5. 16
+6. 8
+7. 4
+8. 2
+9. 1
+
+Resulting in 9 steps. So for input n = 12, the return value would be 9.
+
+
+* * * *
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/ruby).
+
+For running the tests provided, you will need the Minitest gem. Open a
+terminal window and run the following command to install minitest:
+
+    gem install minitest
+
+If you would like color output, you can `require 'minitest/pride'` in
+the test file, or note the alternative instruction, below, for running
+the test file.
+
+In order to run the test, you can run the test file from the exercise
+directory. For example, if the test suite is called
+`hello_world_test.rb`, you can run the following command:
+
+    ruby hello_world_test.rb
+
+To include color from the command line:
+
+    ruby -r minitest/pride hello_world_test.rb
+
+
+## Source
+
+An unsolved problem in mathematics named after mathematician Lothar Collatz [https://en.wikipedia.org/wiki/3x_%2B_1_problem](https://en.wikipedia.org/wiki/3x_%2B_1_problem)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/ruby/exercises/connect/README.md

@@ -0,0 +1,60 @@
+# Connect
+
+Compute the result for a game of Hex / Polygon.
+
+The abstract boardgame known as
+[Hex](https://en.wikipedia.org/wiki/Hex_%28board_game%29) / Polygon /
+CON-TAC-TIX is quite simple in rules, though complex in practice. Two players
+place stones on a rhombus with hexagonal fields. The player to connect his/her
+stones to the opposite side first wins. The four sides of the rhombus are
+divided between the two players (i.e. one player gets assigned a side and the
+side directly opposite it and the other player gets assigned the two other
+sides).
+
+Your goal is to build a program that given a simple representation of a board
+computes the winner (or lack thereof). Note that all games need not be "fair".
+(For example, players may have mismatched piece counts.)
+
+The boards look like this (with spaces added for readability, which won't be in
+the representation passed to your code):
+
+```        
+. O . X .
+ . X X O .
+  O O O X .
+   . X O X O
+    X O O O X
+```
+
+"Player `O`" plays from top to bottom, "Player `X`" plays from left to right. In
+the above example `O` has made a connection from left to right but nobody has
+won since `O` didn't connect top and bottom.
+
+* * * *
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/ruby).
+
+For running the tests provided, you will need the Minitest gem. Open a
+terminal window and run the following command to install minitest:
+
+    gem install minitest
+
+If you would like color output, you can `require 'minitest/pride'` in
+the test file, or note the alternative instruction, below, for running
+the test file.
+
+In order to run the test, you can run the test file from the exercise
+directory. For example, if the test suite is called
+`hello_world_test.rb`, you can run the following command:
+
+    ruby hello_world_test.rb
+
+To include color from the command line:
+
+    ruby -r minitest/pride hello_world_test.rb
+
+
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/ruby/exercises/crypto-square/README.md

@@ -0,0 +1,100 @@
+# Crypto Square
+
+Implement the classic method for composing secret messages called a square code.
+
+Given an English text, output the encoded version of that text.
+
+First, the input is normalized: the spaces and punctuation are removed
+from the English text and the message is downcased.
+
+Then, the normalized characters are broken into rows.  These rows can be
+regarded as forming a rectangle when printed with intervening newlines.
+
+For example, the sentence
+
+> If man was meant to stay on the ground, god would have given us roots.
+
+is normalized to:
+
+> ifmanwasmeanttostayonthegroundgodwouldhavegivenusroots
+
+The plaintext should be organized in to a rectangle.  The size of the
+rectangle (`r x c`) should be decided by the length of the message,
+such that `c >= r` and `c - r <= 1`, where `c` is the number of columns
+and `r` is the number of rows.
+
+Our normalized text is 54 characters long, dictating a rectangle with
+`c = 8` and `r = 7`:
+
+```plain
+ifmanwas
+meanttos
+tayonthe
+groundgo
+dwouldha
+vegivenu
+sroots
+```
+
+The coded message is obtained by reading down the columns going left to
+right.
+
+The message above is coded as:
+
+```plain
+imtgdvsfearwermayoogoanouuiontnnlvtwttddesaohghnsseoau
+```
+
+Output the encoded text in chunks.  Phrases that fill perfect squares
+`(r X r)` should be output in `r`-length chunks separated by spaces.
+Imperfect squares will have `n` empty spaces.  Those spaces should be distributed evenly across the last `n` rows.
+
+```plain
+imtgdvs fearwer mayoogo anouuio ntnnlvt wttddes aohghn sseoau
+```
+
+Notice that were we to stack these, we could visually decode the
+cyphertext back in to the original message:
+
+```plain
+imtgdvs
+fearwer
+mayoogo
+anouuio
+ntnnlvt
+wttddes
+aohghn
+sseoau
+```
+
+* * * *
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/ruby).
+
+For running the tests provided, you will need the Minitest gem. Open a
+terminal window and run the following command to install minitest:
+
+    gem install minitest
+
+If you would like color output, you can `require 'minitest/pride'` in
+the test file, or note the alternative instruction, below, for running
+the test file.
+
+In order to run the test, you can run the test file from the exercise
+directory. For example, if the test suite is called
+`hello_world_test.rb`, you can run the following command:
+
+    ruby hello_world_test.rb
+
+To include color from the command line:
+
+    ruby -r minitest/pride hello_world_test.rb
+
+
+## Source
+
+J Dalbey's Programming Practice problems [http://users.csc.calpoly.edu/~jdalbey/103/Projects/ProgrammingPractice.html](http://users.csc.calpoly.edu/~jdalbey/103/Projects/ProgrammingPractice.html)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/ruby/exercises/custom-set/README.md

@@ -0,0 +1,37 @@
+# Custom Set
+
+Create a custom set type.
+
+Sometimes it is necessary to define a custom data structure of some
+type, like a set. In this exercise you will define your own set. How it
+works internally doesn't matter, as long as it behaves like a set of
+unique elements.
+
+* * * *
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/ruby).
+
+For running the tests provided, you will need the Minitest gem. Open a
+terminal window and run the following command to install minitest:
+
+    gem install minitest
+
+If you would like color output, you can `require 'minitest/pride'` in
+the test file, or note the alternative instruction, below, for running
+the test file.
+
+In order to run the test, you can run the test file from the exercise
+directory. For example, if the test suite is called
+`hello_world_test.rb`, you can run the following command:
+
+    ruby hello_world_test.rb
+
+To include color from the command line:
+
+    ruby -r minitest/pride hello_world_test.rb
+
+
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/ruby/exercises/diamond/README.md

@@ -0,0 +1,85 @@
+# Diamond
+
+The diamond kata takes as its input a letter, and outputs it in a diamond 
+shape. Given a letter, it prints a diamond starting with 'A', with the 
+supplied letter at the widest point.
+
+## Requirements
+
+* The first row contains one 'A'.
+* The last row contains one 'A'.
+* All rows, except the first and last, have exactly two identical letters.
+* All rows have as many trailing spaces as leading spaces. (This might be 0).
+* The diamond is horizontally symmetric.
+* The diamond is vertically symmetric.
+* The diamond has a square shape (width equals height).
+* The letters form a diamond shape.
+* The top half has the letters in ascending order.
+* The bottom half has the letters in descending order. 
+* The four corners (containing the spaces) are triangles.
+
+## Examples
+
+In the following examples, spaces are indicated by `·` characters.
+
+Diamond for letter 'A':
+
+```plain
+A
+```
+
+Diamond for letter 'C':
+
+```plain
+··A··
+·B·B·
+C···C
+·B·B·
+··A··
+```
+
+Diamond for letter 'E':
+
+```plain
+····A····
+···B·B···
+··C···C··
+·D·····D·
+E·······E
+·D·····D·
+··C···C··
+···B·B···
+····A····
+```
+
+* * * *
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/ruby).
+
+For running the tests provided, you will need the Minitest gem. Open a
+terminal window and run the following command to install minitest:
+
+    gem install minitest
+
+If you would like color output, you can `require 'minitest/pride'` in
+the test file, or note the alternative instruction, below, for running
+the test file.
+
+In order to run the test, you can run the test file from the exercise
+directory. For example, if the test suite is called
+`hello_world_test.rb`, you can run the following command:
+
+    ruby hello_world_test.rb
+
+To include color from the command line:
+
+    ruby -r minitest/pride hello_world_test.rb
+
+
+## Source
+
+Seb Rose [http://claysnow.co.uk/recycling-tests-in-tdd/](http://claysnow.co.uk/recycling-tests-in-tdd/)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/ruby/exercises/difference-of-squares/README.md

@@ -0,0 +1,45 @@
+# Difference Of Squares
+
+Find the difference between the square of the sum and the sum of the squares of the first N natural numbers.
+
+The square of the sum of the first ten natural numbers is
+(1 + 2 + ... + 10)² = 55² = 3025.
+
+The sum of the squares of the first ten natural numbers is
+1² + 2² + ... + 10² = 385.
+
+Hence the difference between the square of the sum of the first
+ten natural numbers and the sum of the squares of the first ten
+natural numbers is 3025 - 385 = 2640.
+
+* * * *
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/ruby).
+
+For running the tests provided, you will need the Minitest gem. Open a
+terminal window and run the following command to install minitest:
+
+    gem install minitest
+
+If you would like color output, you can `require 'minitest/pride'` in
+the test file, or note the alternative instruction, below, for running
+the test file.
+
+In order to run the test, you can run the test file from the exercise
+directory. For example, if the test suite is called
+`hello_world_test.rb`, you can run the following command:
+
+    ruby hello_world_test.rb
+
+To include color from the command line:
+
+    ruby -r minitest/pride hello_world_test.rb
+
+
+## Source
+
+Problem 6 at Project Euler [http://projecteuler.net/problem=6](http://projecteuler.net/problem=6)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/ruby/exercises/dominoes/README.md

@@ -0,0 +1,44 @@
+# Dominoes
+
+Make a chain of dominoes.
+
+Compute a way to order a given set of dominoes in such a way that they form a
+correct domino chain (the dots on one half of a stone match the dots on the
+neighbouring half of an adjacent stone) and that dots on the halfs of the stones
+which don't have a neighbour (the first and last stone) match each other.
+
+For example given the stones `21`, `23` and `13` you should compute something
+like `12 23 31` or `32 21 13` or `13 32 21` etc, where the first and last numbers are the same.
+
+For stones 12, 41 and 23 the resulting chain is not valid: 41 12 23's first and last numbers are not the same. 4 != 3
+
+Some test cases may use duplicate stones in a chain solution, assume that multiple Domino sets are being used.
+
+* * * *
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/ruby).
+
+For running the tests provided, you will need the Minitest gem. Open a
+terminal window and run the following command to install minitest:
+
+    gem install minitest
+
+If you would like color output, you can `require 'minitest/pride'` in
+the test file, or note the alternative instruction, below, for running
+the test file.
+
+In order to run the test, you can run the test file from the exercise
+directory. For example, if the test suite is called
+`hello_world_test.rb`, you can run the following command:
+
+    ruby hello_world_test.rb
+
+To include color from the command line:
+
+    ruby -r minitest/pride hello_world_test.rb
+
+
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/ruby/exercises/etl/README.md

@@ -0,0 +1,77 @@
+# Etl
+
+We are going to do the `Transform` step of an Extract-Transform-Load.
+
+### ETL
+Extract-Transform-Load (ETL) is a fancy way of saying, "We have some crufty, legacy data over in this system, and now we need it in this shiny new system over here, so
+we're going to migrate this."
+
+(Typically, this is followed by, "We're only going to need to run this
+once." That's then typically followed by much forehead slapping and
+moaning about how stupid we could possibly be.)
+
+### The goal
+We're going to extract some scrabble scores from a legacy system.
+
+The old system stored a list of letters per score:
+
+- 1 point: "A", "E", "I", "O", "U", "L", "N", "R", "S", "T",
+- 2 points: "D", "G",
+- 3 points: "B", "C", "M", "P",
+- 4 points: "F", "H", "V", "W", "Y",
+- 5 points: "K",
+- 8 points: "J", "X",
+- 10 points: "Q", "Z",
+
+The shiny new scrabble system instead stores the score per letter, which
+makes it much faster and easier to calculate the score for a word. It
+also stores the letters in lower-case regardless of the case of the
+input letters:
+
+- "a" is worth 1 point.
+- "b" is worth 3 points.
+- "c" is worth 3 points.
+- "d" is worth 2 points.
+- Etc.
+
+Your mission, should you choose to accept it, is to transform the legacy data
+format to the shiny new format.
+
+### Notes
+
+A final note about scoring, Scrabble is played around the world in a
+variety of languages, each with its own unique scoring table. For
+example, an "E" is scored at 2 in the Māori-language version of the
+game while being scored at 4 in the Hawaiian-language version.
+
+* * * *
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/ruby).
+
+For running the tests provided, you will need the Minitest gem. Open a
+terminal window and run the following command to install minitest:
+
+    gem install minitest
+
+If you would like color output, you can `require 'minitest/pride'` in
+the test file, or note the alternative instruction, below, for running
+the test file.
+
+In order to run the test, you can run the test file from the exercise
+directory. For example, if the test suite is called
+`hello_world_test.rb`, you can run the following command:
+
+    ruby hello_world_test.rb
+
+To include color from the command line:
+
+    ruby -r minitest/pride hello_world_test.rb
+
+
+## Source
+
+The Jumpstart Lab team [http://jumpstartlab.com](http://jumpstartlab.com)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.