ruby2d 0.10.0 → 0.11.2

data/assets/include/SDL2/SDL_events.h

@@ -1,6 +1,6 @@
 /*
   Simple DirectMedia Layer
-  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+  Copyright (C) 1997-2022 Sam Lantinga <slouken@libsdl.org>
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -50,7 +50,7 @@ extern "C" {
 #define SDL_PRESSED 1
 
 /**
- * \brief The types of events that can be delivered.
+ * The types of events that can be delivered.
  */
 typedef enum
 {
@@ -160,6 +160,9 @@ typedef enum
     SDL_RENDER_TARGETS_RESET = 0x2000, /**< The render targets have been reset and their contents need to be updated */
     SDL_RENDER_DEVICE_RESET, /**< The device has been reset and all textures need to be recreated */
 
+    /* Internal events */
+    SDL_POLLSENTINEL = 0x7F00, /**< Signals the end of an event poll cycle */
+
     /** Events ::SDL_USEREVENT through ::SDL_LASTEVENT are for your use,
      *  and should be allocated with SDL_RegisterEvents()
      */
@@ -298,6 +301,8 @@ typedef struct SDL_MouseWheelEvent
     Sint32 x;           /**< The amount scrolled horizontally, positive to the right and negative to the left */
     Sint32 y;           /**< The amount scrolled vertically, positive away from the user and negative toward the user */
     Uint32 direction;   /**< Set to one of the SDL_MOUSEWHEEL_* defines. When FLIPPED the values in X and Y will be opposite. Multiply by -1 to change them back */
+    float preciseX;     /**< The amount scrolled horizontally, positive to the right and negative to the left, with float precision (added in 2.0.18) */
+    float preciseY;     /**< The amount scrolled vertically, positive away from the user and negative toward the user, with float precision (added in 2.0.18) */
 } SDL_MouseWheelEvent;
 
 /**
@@ -620,28 +625,49 @@ typedef union SDL_Event
     SDL_DollarGestureEvent dgesture;        /**< Gesture event data */
     SDL_DropEvent drop;                     /**< Drag and drop event data */
 
-    /* This is necessary for ABI compatibility between Visual C++ and GCC
-       Visual C++ will respect the push pack pragma and use 52 bytes for
-       this structure, and GCC will use the alignment of the largest datatype
-       within the union, which is 8 bytes.
+    /* This is necessary for ABI compatibility between Visual C++ and GCC.
+       Visual C++ will respect the push pack pragma and use 52 bytes (size of
+       SDL_TextEditingEvent, the largest structure for 32-bit and 64-bit
+       architectures) for this union, and GCC will use the alignment of the
+       largest datatype within the union, which is 8 bytes on 64-bit
+       architectures.
 
        So... we'll add padding to force the size to be 56 bytes for both.
+
+       On architectures where pointers are 16 bytes, this needs rounding up to
+       the next multiple of 16, 64, and on architectures where pointers are
+       even larger the size of SDL_UserEvent will dominate as being 3 pointers.
     */
-    Uint8 padding[56];
+    Uint8 padding[sizeof(void *) <= 8 ? 56 : sizeof(void *) == 16 ? 64 : 3 * sizeof(void *)];
 } SDL_Event;
 
 /* Make sure we haven't broken binary compatibility */
-SDL_COMPILE_TIME_ASSERT(SDL_Event, sizeof(SDL_Event) == 56);
+SDL_COMPILE_TIME_ASSERT(SDL_Event, sizeof(SDL_Event) == sizeof(((SDL_Event *)NULL)->padding));
 
 
 /* Function prototypes */
 
 /**
- *  Pumps the event loop, gathering events from the input devices.
+ * Pump the event loop, gathering events from the input devices.
+ *
+ * This function updates the event queue and internal input device state.
  *
- *  This function updates the event queue and internal input device state.
+ * **WARNING**: This should only be run in the thread that initialized the
+ * video subsystem, and for extra safety, you should consider only doing those
+ * things on the main thread in any case.
  *
- *  This should only be run in the thread that sets the video mode.
+ * SDL_PumpEvents() gathers all the pending input information from devices and
+ * places it in the event queue. Without calls to SDL_PumpEvents() no events
+ * would ever be placed on the queue. Often the need for calls to
+ * SDL_PumpEvents() is hidden from the user since SDL_PollEvent() and
+ * SDL_WaitEvent() implicitly call SDL_PumpEvents(). However, if you are not
+ * polling or waiting for events (e.g. you are filtering them), then you must
+ * call SDL_PumpEvents() to force an event queue update.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_PollEvent
+ * \sa SDL_WaitEvent
  */
 extern DECLSPEC void SDLCALL SDL_PumpEvents(void);
 
@@ -654,22 +680,42 @@ typedef enum
 } SDL_eventaction;
 
 /**
- *  Checks the event queue for messages and optionally returns them.
+ * Check the event queue for messages and optionally return them.
+ *
+ * `action` may be any of the following:
  *
- *  If \c action is ::SDL_ADDEVENT, up to \c numevents events will be added to
- *  the back of the event queue.
+ * - `SDL_ADDEVENT`: up to `numevents` events will be added to the back of the
+ *   event queue.
+ * - `SDL_PEEKEVENT`: `numevents` events at the front of the event queue,
+ *   within the specified minimum and maximum type, will be returned to the
+ *   caller and will _not_ be removed from the queue.
+ * - `SDL_GETEVENT`: up to `numevents` events at the front of the event queue,
+ *   within the specified minimum and maximum type, will be returned to the
+ *   caller and will be removed from the queue.
  *
- *  If \c action is ::SDL_PEEKEVENT, up to \c numevents events at the front
- *  of the event queue, within the specified minimum and maximum type,
- *  will be returned and will not be removed from the queue.
+ * You may have to call SDL_PumpEvents() before calling this function.
+ * Otherwise, the events may not be ready to be filtered when you call
+ * SDL_PeepEvents().
  *
- *  If \c action is ::SDL_GETEVENT, up to \c numevents events at the front
- *  of the event queue, within the specified minimum and maximum type,
- *  will be returned and will be removed from the queue.
+ * This function is thread-safe.
  *
- *  \return The number of events actually stored, or -1 if there was an error.
+ * \param events destination buffer for the retrieved events
+ * \param numevents if action is SDL_ADDEVENT, the number of events to add
+ *                  back to the event queue; if action is SDL_PEEKEVENT or
+ *                  SDL_GETEVENT, the maximum number of events to retrieve
+ * \param action action to take; see [[#action|Remarks]] for details
+ * \param minType minimum value of the event type to be considered;
+ *                SDL_FIRSTEVENT is a safe choice
+ * \param maxType maximum value of the event type to be considered;
+ *                SDL_LASTEVENT is a safe choice
+ * \returns the number of events actually stored or a negative error code on
+ *          failure; call SDL_GetError() for more information.
  *
- *  This function is thread-safe.
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_PollEvent
+ * \sa SDL_PumpEvents
+ * \sa SDL_PushEvent
  */
 extern DECLSPEC int SDLCALL SDL_PeepEvents(SDL_Event * events, int numevents,
                                            SDL_eventaction action,
@@ -677,113 +723,354 @@ extern DECLSPEC int SDLCALL SDL_PeepEvents(SDL_Event * events, int numevents,
 /* @} */
 
 /**
- *  Checks to see if certain event types are in the event queue.
+ * Check for the existence of a certain event type in the event queue.
+ *
+ * If you need to check for a range of event types, use SDL_HasEvents()
+ * instead.
+ *
+ * \param type the type of event to be queried; see SDL_EventType for details
+ * \returns SDL_TRUE if events matching `type` are present, or SDL_FALSE if
+ *          events matching `type` are not present.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_HasEvents
  */
 extern DECLSPEC SDL_bool SDLCALL SDL_HasEvent(Uint32 type);
+
+
+/**
+ * Check for the existence of certain event types in the event queue.
+ *
+ * If you need to check for a single event type, use SDL_HasEvent() instead.
+ *
+ * \param minType the low end of event type to be queried, inclusive; see
+ *                SDL_EventType for details
+ * \param maxType the high end of event type to be queried, inclusive; see
+ *                SDL_EventType for details
+ * \returns SDL_TRUE if events with type >= `minType` and <= `maxType` are
+ *          present, or SDL_FALSE if not.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_HasEvents
+ */
 extern DECLSPEC SDL_bool SDLCALL SDL_HasEvents(Uint32 minType, Uint32 maxType);
 
 /**
- *  This function clears events from the event queue
- *  This function only affects currently queued events. If you want to make
- *  sure that all pending OS events are flushed, you can call SDL_PumpEvents()
- *  on the main thread immediately before the flush call.
+ * Clear events of a specific type from the event queue.
+ *
+ * This will unconditionally remove any events from the queue that match
+ * `type`. If you need to remove a range of event types, use SDL_FlushEvents()
+ * instead.
+ *
+ * It's also normal to just ignore events you don't care about in your event
+ * loop without calling this function.
+ *
+ * This function only affects currently queued events. If you want to make
+ * sure that all pending OS events are flushed, you can call SDL_PumpEvents()
+ * on the main thread immediately before the flush call.
+ *
+ * \param type the type of event to be cleared; see SDL_EventType for details
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_FlushEvents
  */
 extern DECLSPEC void SDLCALL SDL_FlushEvent(Uint32 type);
+
+/**
+ * Clear events of a range of types from the event queue.
+ *
+ * This will unconditionally remove any events from the queue that are in the
+ * range of `minType` to `maxType`, inclusive. If you need to remove a single
+ * event type, use SDL_FlushEvent() instead.
+ *
+ * It's also normal to just ignore events you don't care about in your event
+ * loop without calling this function.
+ *
+ * This function only affects currently queued events. If you want to make
+ * sure that all pending OS events are flushed, you can call SDL_PumpEvents()
+ * on the main thread immediately before the flush call.
+ *
+ * \param minType the low end of event type to be cleared, inclusive; see
+ *                SDL_EventType for details
+ * \param maxType the high end of event type to be cleared, inclusive; see
+ *                SDL_EventType for details
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_FlushEvent
+ */
 extern DECLSPEC void SDLCALL SDL_FlushEvents(Uint32 minType, Uint32 maxType);
 
 /**
- *  \brief Polls for currently pending events.
+ * Poll for currently pending events.
+ *
+ * If `event` is not NULL, the next event is removed from the queue and stored
+ * in the SDL_Event structure pointed to by `event`. The 1 returned refers to
+ * this event, immediately stored in the SDL Event structure -- not an event
+ * to follow.
  *
- *  \return 1 if there are any pending events, or 0 if there are none available.
+ * If `event` is NULL, it simply returns 1 if there is an event in the queue,
+ * but will not remove it from the queue.
  *
- *  \param event If not NULL, the next event is removed from the queue and
- *               stored in that area.
+ * As this function may implicitly call SDL_PumpEvents(), you can only call
+ * this function in the thread that set the video mode.
+ *
+ * SDL_PollEvent() is the favored way of receiving system events since it can
+ * be done from the main loop and does not suspend the main loop while waiting
+ * on an event to be posted.
+ *
+ * The common practice is to fully process the event queue once every frame,
+ * usually as a first step before updating the game's state:
+ *
+ * ```c
+ * while (game_is_still_running) {
+ *     SDL_Event event;
+ *     while (SDL_PollEvent(&event)) {  // poll until all events are handled!
+ *         // decide what to do with this event.
+ *     }
+ *
+ *     // update game state, draw the current frame
+ * }
+ * ```
+ *
+ * \param event the SDL_Event structure to be filled with the next event from
+ *              the queue, or NULL
+ * \returns 1 if there is a pending event or 0 if there are none available.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_GetEventFilter
+ * \sa SDL_PeepEvents
+ * \sa SDL_PushEvent
+ * \sa SDL_SetEventFilter
+ * \sa SDL_WaitEvent
+ * \sa SDL_WaitEventTimeout
  */
 extern DECLSPEC int SDLCALL SDL_PollEvent(SDL_Event * event);
 
 /**
- *  \brief Waits indefinitely for the next available event.
+ * Wait indefinitely for the next available event.
+ *
+ * If `event` is not NULL, the next event is removed from the queue and stored
+ * in the SDL_Event structure pointed to by `event`.
+ *
+ * As this function may implicitly call SDL_PumpEvents(), you can only call
+ * this function in the thread that initialized the video subsystem.
  *
- *  \return 1, or 0 if there was an error while waiting for events.
+ * \param event the SDL_Event structure to be filled in with the next event
+ *              from the queue, or NULL
+ * \returns 1 on success or 0 if there was an error while waiting for events;
+ *          call SDL_GetError() for more information.
  *
- *  \param event If not NULL, the next event is removed from the queue and
- *               stored in that area.
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_PollEvent
+ * \sa SDL_PumpEvents
+ * \sa SDL_WaitEventTimeout
  */
 extern DECLSPEC int SDLCALL SDL_WaitEvent(SDL_Event * event);
 
 /**
- *  \brief Waits until the specified timeout (in milliseconds) for the next
- *         available event.
+ * Wait until the specified timeout (in milliseconds) for the next available
+ * event.
+ *
+ * If `event` is not NULL, the next event is removed from the queue and stored
+ * in the SDL_Event structure pointed to by `event`.
  *
- *  \return 1, or 0 if there was an error while waiting for events.
+ * As this function may implicitly call SDL_PumpEvents(), you can only call
+ * this function in the thread that initialized the video subsystem.
  *
- *  \param event If not NULL, the next event is removed from the queue and
- *               stored in that area.
- *  \param timeout The timeout (in milliseconds) to wait for next event.
+ * \param event the SDL_Event structure to be filled in with the next event
+ *              from the queue, or NULL
+ * \param timeout the maximum number of milliseconds to wait for the next
+ *                available event
+ * \returns 1 on success or 0 if there was an error while waiting for events;
+ *          call SDL_GetError() for more information. This also returns 0 if
+ *          the timeout elapsed without an event arriving.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_PollEvent
+ * \sa SDL_PumpEvents
+ * \sa SDL_WaitEvent
  */
 extern DECLSPEC int SDLCALL SDL_WaitEventTimeout(SDL_Event * event,
                                                  int timeout);
 
 /**
- *  \brief Add an event to the event queue.
+ * Add an event to the event queue.
+ *
+ * The event queue can actually be used as a two way communication channel.
+ * Not only can events be read from the queue, but the user can also push
+ * their own events onto it. `event` is a pointer to the event structure you
+ * wish to push onto the queue. The event is copied into the queue, and the
+ * caller may dispose of the memory pointed to after SDL_PushEvent() returns.
+ *
+ * Note: Pushing device input events onto the queue doesn't modify the state
+ * of the device within SDL.
+ *
+ * This function is thread-safe, and can be called from other threads safely.
+ *
+ * Note: Events pushed onto the queue with SDL_PushEvent() get passed through
+ * the event filter but events added with SDL_PeepEvents() do not.
  *
- *  \return 1 on success, 0 if the event was filtered, or -1 if the event queue
- *          was full or there was some other error.
+ * For pushing application-specific events, please use SDL_RegisterEvents() to
+ * get an event type that does not conflict with other code that also wants
+ * its own custom event types.
+ *
+ * \param event the SDL_Event to be added to the queue
+ * \returns 1 on success, 0 if the event was filtered, or a negative error
+ *          code on failure; call SDL_GetError() for more information. A
+ *          common reason for error is the event queue being full.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_PeepEvents
+ * \sa SDL_PollEvent
+ * \sa SDL_RegisterEvents
  */
 extern DECLSPEC int SDLCALL SDL_PushEvent(SDL_Event * event);
 
+/**
+ * A function pointer used for callbacks that watch the event queue.
+ *
+ * \param userdata what was passed as `userdata` to SDL_SetEventFilter()
+ *        or SDL_AddEventWatch, etc
+ * \param event the event that triggered the callback
+ * \returns 1 to permit event to be added to the queue, and 0 to disallow
+ *          it. When used with SDL_AddEventWatch, the return value is ignored.
+ *
+ * \sa SDL_SetEventFilter
+ * \sa SDL_AddEventWatch
+ */
 typedef int (SDLCALL * SDL_EventFilter) (void *userdata, SDL_Event * event);
 
 /**
- *  Sets up a filter to process all events before they change internal state and
- *  are posted to the internal event queue.
+ * Set up a filter to process all events before they change internal state and
+ * are posted to the internal event queue.
+ *
+ * If the filter function returns 1 when called, then the event will be added
+ * to the internal queue. If it returns 0, then the event will be dropped from
+ * the queue, but the internal state will still be updated. This allows
+ * selective filtering of dynamically arriving events.
+ *
+ * **WARNING**: Be very careful of what you do in the event filter function,
+ * as it may run in a different thread!
+ *
+ * On platforms that support it, if the quit event is generated by an
+ * interrupt signal (e.g. pressing Ctrl-C), it will be delivered to the
+ * application at the next event poll.
+ *
+ * There is one caveat when dealing with the ::SDL_QuitEvent event type. The
+ * event filter is only called when the window manager desires to close the
+ * application window. If the event filter returns 1, then the window will be
+ * closed, otherwise the window will remain open if possible.
+ *
+ * Note: Disabled events never make it to the event filter function; see
+ * SDL_EventState().
  *
- *  The filter is prototyped as:
- *  \code
- *      int SDL_EventFilter(void *userdata, SDL_Event * event);
- *  \endcode
+ * Note: If you just want to inspect events without filtering, you should use
+ * SDL_AddEventWatch() instead.
  *
- *  If the filter returns 1, then the event will be added to the internal queue.
- *  If it returns 0, then the event will be dropped from the queue, but the
- *  internal state will still be updated.  This allows selective filtering of
- *  dynamically arriving events.
+ * Note: Events pushed onto the queue with SDL_PushEvent() get passed through
+ * the event filter, but events pushed onto the queue with SDL_PeepEvents() do
+ * not.
  *
- *  \warning  Be very careful of what you do in the event filter function, as
- *            it may run in a different thread!
+ * \param filter An SDL_EventFilter function to call when an event happens
+ * \param userdata a pointer that is passed to `filter`
  *
- *  There is one caveat when dealing with the ::SDL_QuitEvent event type.  The
- *  event filter is only called when the window manager desires to close the
- *  application window.  If the event filter returns 1, then the window will
- *  be closed, otherwise the window will remain open if possible.
+ * \since This function is available since SDL 2.0.0.
  *
- *  If the quit event is generated by an interrupt signal, it will bypass the
- *  internal queue and be delivered to the application at the next event poll.
+ * \sa SDL_AddEventWatch
+ * \sa SDL_EventState
+ * \sa SDL_GetEventFilter
+ * \sa SDL_PeepEvents
+ * \sa SDL_PushEvent
  */
 extern DECLSPEC void SDLCALL SDL_SetEventFilter(SDL_EventFilter filter,
                                                 void *userdata);
 
 /**
- *  Return the current event filter - can be used to "chain" filters.
- *  If there is no event filter set, this function returns SDL_FALSE.
+ * Query the current event filter.
+ *
+ * This function can be used to "chain" filters, by saving the existing filter
+ * before replacing it with a function that will call that saved filter.
+ *
+ * \param filter the current callback function will be stored here
+ * \param userdata the pointer that is passed to the current event filter will
+ *                 be stored here
+ * \returns SDL_TRUE on success or SDL_FALSE if there is no event filter set.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_SetEventFilter
  */
 extern DECLSPEC SDL_bool SDLCALL SDL_GetEventFilter(SDL_EventFilter * filter,
                                                     void **userdata);
 
 /**
- *  Add a function which is called when an event is added to the queue.
+ * Add a callback to be triggered when an event is added to the event queue.
+ *
+ * `filter` will be called when an event happens, and its return value is
+ * ignored.
+ *
+ * **WARNING**: Be very careful of what you do in the event filter function,
+ * as it may run in a different thread!
+ *
+ * If the quit event is generated by a signal (e.g. SIGINT), it will bypass
+ * the internal queue and be delivered to the watch callback immediately, and
+ * arrive at the next event poll.
+ *
+ * Note: the callback is called for events posted by the user through
+ * SDL_PushEvent(), but not for disabled events, nor for events by a filter
+ * callback set with SDL_SetEventFilter(), nor for events posted by the user
+ * through SDL_PeepEvents().
+ *
+ * \param filter an SDL_EventFilter function to call when an event happens.
+ * \param userdata a pointer that is passed to `filter`
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_DelEventWatch
+ * \sa SDL_SetEventFilter
  */
 extern DECLSPEC void SDLCALL SDL_AddEventWatch(SDL_EventFilter filter,
                                                void *userdata);
 
 /**
- *  Remove an event watch function added with SDL_AddEventWatch()
+ * Remove an event watch callback added with SDL_AddEventWatch().
+ *
+ * This function takes the same input as SDL_AddEventWatch() to identify and
+ * delete the corresponding callback.
+ *
+ * \param filter the function originally passed to SDL_AddEventWatch()
+ * \param userdata the pointer originally passed to SDL_AddEventWatch()
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_AddEventWatch
  */
 extern DECLSPEC void SDLCALL SDL_DelEventWatch(SDL_EventFilter filter,
                                                void *userdata);
 
 /**
- *  Run the filter function on the current event queue, removing any
- *  events for which the filter returns 0.
+ * Run a specific filter function on the current event queue, removing any
+ * events for which the filter returns 0.
+ *
+ * See SDL_SetEventFilter() for more information. Unlike SDL_SetEventFilter(),
+ * this function does not change the filter permanently, it only uses the
+ * supplied filter until this function returns.
+ *
+ * \param filter the SDL_EventFilter function to call when an event happens
+ * \param userdata a pointer that is passed to `filter`
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_GetEventFilter
+ * \sa SDL_SetEventFilter
  */
 extern DECLSPEC void SDLCALL SDL_FilterEvents(SDL_EventFilter filter,
                                               void *userdata);
@@ -795,24 +1082,45 @@ extern DECLSPEC void SDLCALL SDL_FilterEvents(SDL_EventFilter filter,
 #define SDL_ENABLE   1
 
 /**
- *  This function allows you to set the state of processing certain events.
- *   - If \c state is set to ::SDL_IGNORE, that event will be automatically
- *     dropped from the event queue and will not be filtered.
- *   - If \c state is set to ::SDL_ENABLE, that event will be processed
- *     normally.
- *   - If \c state is set to ::SDL_QUERY, SDL_EventState() will return the
- *     current processing state of the specified event.
+ * Set the state of processing events by type.
+ *
+ * `state` may be any of the following:
+ *
+ * - `SDL_QUERY`: returns the current processing state of the specified event
+ * - `SDL_IGNORE` (aka `SDL_DISABLE`): the event will automatically be dropped
+ *   from the event queue and will not be filtered
+ * - `SDL_ENABLE`: the event will be processed normally
+ *
+ * \param type the type of event; see SDL_EventType for details
+ * \param state how to process the event
+ * \returns `SDL_DISABLE` or `SDL_ENABLE`, representing the processing state
+ *          of the event before this function makes any changes to it.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_GetEventState
  */
 extern DECLSPEC Uint8 SDLCALL SDL_EventState(Uint32 type, int state);
 /* @} */
 #define SDL_GetEventState(type) SDL_EventState(type, SDL_QUERY)
 
 /**
- *  This function allocates a set of user-defined events, and returns
- *  the beginning event number for that set of events.
+ * Allocate a set of user-defined events, and return the beginning event
+ * number for that set of events.
+ *
+ * Calling this function with `numevents` <= 0 is an error and will return
+ * (Uint32)-1.
+ *
+ * Note, (Uint32)-1 means the maximum unsigned 32-bit integer value (or
+ * 0xFFFFFFFF), but is clearer to write.
+ *
+ * \param numevents the number of events to be allocated
+ * \returns the beginning event number, or (Uint32)-1 if there are not enough
+ *          user-defined events left.
+ *
+ * \since This function is available since SDL 2.0.0.
  *
- *  If there aren't enough user-defined events left, this function
- *  returns (Uint32)-1
+ * \sa SDL_PushEvent
  */
 extern DECLSPEC Uint32 SDLCALL SDL_RegisterEvents(int numevents);