rfreeimage 0.1.0

data/vendor/FreeImage/Source/LibJPEG/jpegtran.c

@@ -0,0 +1,577 @@
+/*
+ * jpegtran.c
+ *
+ * Copyright (C) 1995-2013, Thomas G. Lane, Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a command-line user interface for JPEG transcoding.
+ * It is very similar to cjpeg.c, and partly to djpeg.c, but provides
+ * lossless transcoding between different JPEG file formats.  It also
+ * provides some lossless and sort-of-lossless transformations of JPEG data.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#include "transupp.h"		/* Support routines for jpegtran */
+#include "jversion.h"		/* for version message */
+
+#ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
+#ifdef __MWERKS__
+#include <SIOUX.h>              /* Metrowerks needs this */
+#include <console.h>		/* ... and this */
+#endif
+#ifdef THINK_C
+#include <console.h>		/* Think declares it here */
+#endif
+#endif
+
+
+/*
+ * Argument-parsing code.
+ * The switch parser is designed to be useful with DOS-style command line
+ * syntax, ie, intermixed switches and file names, where only the switches
+ * to the left of a given file name affect processing of that file.
+ * The main program in this file doesn't actually use this capability...
+ */
+
+
+static const char * progname;	/* program name for error messages */
+static char * outfilename;	/* for -outfile switch */
+static char * scaleoption;	/* -scale switch */
+static JCOPY_OPTION copyoption;	/* -copy switch */
+static jpeg_transform_info transformoption; /* image transformation options */
+
+
+LOCAL(void)
+usage (void)
+/* complain about bad command line */
+{
+  fprintf(stderr, "usage: %s [switches] ", progname);
+#ifdef TWO_FILE_COMMANDLINE
+  fprintf(stderr, "inputfile outputfile\n");
+#else
+  fprintf(stderr, "[inputfile]\n");
+#endif
+
+  fprintf(stderr, "Switches (names may be abbreviated):\n");
+  fprintf(stderr, "  -copy none     Copy no extra markers from source file\n");
+  fprintf(stderr, "  -copy comments Copy only comment markers (default)\n");
+  fprintf(stderr, "  -copy all      Copy all extra markers\n");
+#ifdef ENTROPY_OPT_SUPPORTED
+  fprintf(stderr, "  -optimize      Optimize Huffman table (smaller file, but slow compression)\n");
+#endif
+#ifdef C_PROGRESSIVE_SUPPORTED
+  fprintf(stderr, "  -progressive   Create progressive JPEG file\n");
+#endif
+  fprintf(stderr, "Switches for modifying the image:\n");
+#if TRANSFORMS_SUPPORTED
+  fprintf(stderr, "  -crop WxH+X+Y  Crop to a rectangular subarea\n");
+  fprintf(stderr, "  -flip [horizontal|vertical]  Mirror image (left-right or top-bottom)\n");
+  fprintf(stderr, "  -grayscale     Reduce to grayscale (omit color data)\n");
+  fprintf(stderr, "  -perfect       Fail if there is non-transformable edge blocks\n");
+  fprintf(stderr, "  -rotate [90|180|270]         Rotate image (degrees clockwise)\n");
+#endif
+  fprintf(stderr, "  -scale M/N     Scale output image by fraction M/N, eg, 1/8\n");
+#if TRANSFORMS_SUPPORTED
+  fprintf(stderr, "  -transpose     Transpose image\n");
+  fprintf(stderr, "  -transverse    Transverse transpose image\n");
+  fprintf(stderr, "  -trim          Drop non-transformable edge blocks\n");
+  fprintf(stderr, "  -wipe WxH+X+Y  Wipe (gray out) a rectangular subarea\n");
+#endif
+  fprintf(stderr, "Switches for advanced users:\n");
+#ifdef C_ARITH_CODING_SUPPORTED
+  fprintf(stderr, "  -arithmetic    Use arithmetic coding\n");
+#endif
+  fprintf(stderr, "  -restart N     Set restart interval in rows, or in blocks with B\n");
+  fprintf(stderr, "  -maxmemory N   Maximum memory to use (in kbytes)\n");
+  fprintf(stderr, "  -outfile name  Specify name for output file\n");
+  fprintf(stderr, "  -verbose  or  -debug   Emit debug output\n");
+  fprintf(stderr, "Switches for wizards:\n");
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+  fprintf(stderr, "  -scans file    Create multi-scan JPEG per script file\n");
+#endif
+  exit(EXIT_FAILURE);
+}
+
+
+LOCAL(void)
+select_transform (JXFORM_CODE transform)
+/* Silly little routine to detect multiple transform options,
+ * which we can't handle.
+ */
+{
+#if TRANSFORMS_SUPPORTED
+  if (transformoption.transform == JXFORM_NONE ||
+      transformoption.transform == transform) {
+    transformoption.transform = transform;
+  } else {
+    fprintf(stderr, "%s: can only do one image transformation at a time\n",
+	    progname);
+    usage();
+  }
+#else
+  fprintf(stderr, "%s: sorry, image transformation was not compiled\n",
+	  progname);
+  exit(EXIT_FAILURE);
+#endif
+}
+
+
+LOCAL(int)
+parse_switches (j_compress_ptr cinfo, int argc, char **argv,
+		int last_file_arg_seen, boolean for_real)
+/* Parse optional switches.
+ * Returns argv[] index of first file-name argument (== argc if none).
+ * Any file names with indexes <= last_file_arg_seen are ignored;
+ * they have presumably been processed in a previous iteration.
+ * (Pass 0 for last_file_arg_seen on the first or only iteration.)
+ * for_real is FALSE on the first (dummy) pass; we may skip any expensive
+ * processing.
+ */
+{
+  int argn;
+  char * arg;
+  boolean simple_progressive;
+  char * scansarg = NULL;	/* saves -scans parm if any */
+
+  /* Set up default JPEG parameters. */
+  simple_progressive = FALSE;
+  outfilename = NULL;
+  scaleoption = NULL;
+  copyoption = JCOPYOPT_DEFAULT;
+  transformoption.transform = JXFORM_NONE;
+  transformoption.perfect = FALSE;
+  transformoption.trim = FALSE;
+  transformoption.force_grayscale = FALSE;
+  transformoption.crop = FALSE;
+  cinfo->err->trace_level = 0;
+
+  /* Scan command line options, adjust parameters */
+
+  for (argn = 1; argn < argc; argn++) {
+    arg = argv[argn];
+    if (*arg != '-') {
+      /* Not a switch, must be a file name argument */
+      if (argn <= last_file_arg_seen) {
+	outfilename = NULL;	/* -outfile applies to just one input file */
+	continue;		/* ignore this name if previously processed */
+      }
+      break;			/* else done parsing switches */
+    }
+    arg++;			/* advance past switch marker character */
+
+    if (keymatch(arg, "arithmetic", 1)) {
+      /* Use arithmetic coding. */
+#ifdef C_ARITH_CODING_SUPPORTED
+      cinfo->arith_code = TRUE;
+#else
+      fprintf(stderr, "%s: sorry, arithmetic coding not supported\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "copy", 2)) {
+      /* Select which extra markers to copy. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "none", 1)) {
+	copyoption = JCOPYOPT_NONE;
+      } else if (keymatch(argv[argn], "comments", 1)) {
+	copyoption = JCOPYOPT_COMMENTS;
+      } else if (keymatch(argv[argn], "all", 1)) {
+	copyoption = JCOPYOPT_ALL;
+      } else
+	usage();
+
+    } else if (keymatch(arg, "crop", 2)) {
+      /* Perform lossless cropping. */
+#if TRANSFORMS_SUPPORTED
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (transformoption.crop /* reject multiple crop/wipe requests */ ||
+	  ! jtransform_parse_crop_spec(&transformoption, argv[argn])) {
+	fprintf(stderr, "%s: bogus -crop argument '%s'\n",
+		progname, argv[argn]);
+	exit(EXIT_FAILURE);
+      }
+#else
+      select_transform(JXFORM_NONE);	/* force an error */
+#endif
+
+    } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
+      /* Enable debug printouts. */
+      /* On first -d, print version identification */
+      static boolean printed_version = FALSE;
+
+      if (! printed_version) {
+	fprintf(stderr, "Independent JPEG Group's JPEGTRAN, version %s\n%s\n",
+		JVERSION, JCOPYRIGHT);
+	printed_version = TRUE;
+      }
+      cinfo->err->trace_level++;
+
+    } else if (keymatch(arg, "flip", 1)) {
+      /* Mirror left-right or top-bottom. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "horizontal", 1))
+	select_transform(JXFORM_FLIP_H);
+      else if (keymatch(argv[argn], "vertical", 1))
+	select_transform(JXFORM_FLIP_V);
+      else
+	usage();
+
+    } else if (keymatch(arg, "grayscale", 1) || keymatch(arg, "greyscale",1)) {
+      /* Force to grayscale. */
+#if TRANSFORMS_SUPPORTED
+      transformoption.force_grayscale = TRUE;
+#else
+      select_transform(JXFORM_NONE);	/* force an error */
+#endif
+
+    } else if (keymatch(arg, "maxmemory", 3)) {
+      /* Maximum memory in Kb (or Mb with 'm'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (ch == 'm' || ch == 'M')
+	lval *= 1000L;
+      cinfo->mem->max_memory_to_use = lval * 1000L;
+
+    } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) {
+      /* Enable entropy parm optimization. */
+#ifdef ENTROPY_OPT_SUPPORTED
+      cinfo->optimize_coding = TRUE;
+#else
+      fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "outfile", 4)) {
+      /* Set output file name. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      outfilename = argv[argn];	/* save it away for later use */
+
+    } else if (keymatch(arg, "perfect", 2)) {
+      /* Fail if there is any partial edge MCUs that the transform can't
+       * handle. */
+      transformoption.perfect = TRUE;
+
+    } else if (keymatch(arg, "progressive", 2)) {
+      /* Select simple progressive mode. */
+#ifdef C_PROGRESSIVE_SUPPORTED
+      simple_progressive = TRUE;
+      /* We must postpone execution until num_components is known. */
+#else
+      fprintf(stderr, "%s: sorry, progressive output was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "restart", 1)) {
+      /* Restart interval in MCU rows (or in MCUs with 'b'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (lval < 0 || lval > 65535L)
+	usage();
+      if (ch == 'b' || ch == 'B') {
+	cinfo->restart_interval = (unsigned int) lval;
+	cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */
+      } else {
+	cinfo->restart_in_rows = (int) lval;
+	/* restart_interval will be computed during startup */
+      }
+
+    } else if (keymatch(arg, "rotate", 2)) {
+      /* Rotate 90, 180, or 270 degrees (measured clockwise). */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "90", 2))
+	select_transform(JXFORM_ROT_90);
+      else if (keymatch(argv[argn], "180", 3))
+	select_transform(JXFORM_ROT_180);
+      else if (keymatch(argv[argn], "270", 3))
+	select_transform(JXFORM_ROT_270);
+      else
+	usage();
+
+    } else if (keymatch(arg, "scale", 4)) {
+      /* Scale the output image by a fraction M/N. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      scaleoption = argv[argn];
+      /* We must postpone processing until decompression startup. */
+
+    } else if (keymatch(arg, "scans", 1)) {
+      /* Set scan script. */
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      scansarg = argv[argn];
+      /* We must postpone reading the file in case -progressive appears. */
+#else
+      fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "transpose", 1)) {
+      /* Transpose (across UL-to-LR axis). */
+      select_transform(JXFORM_TRANSPOSE);
+
+    } else if (keymatch(arg, "transverse", 6)) {
+      /* Transverse transpose (across UR-to-LL axis). */
+      select_transform(JXFORM_TRANSVERSE);
+
+    } else if (keymatch(arg, "trim", 3)) {
+      /* Trim off any partial edge MCUs that the transform can't handle. */
+      transformoption.trim = TRUE;
+
+    } else if (keymatch(arg, "wipe", 1)) {
+#if TRANSFORMS_SUPPORTED
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (transformoption.crop /* reject multiple crop/wipe requests */ ||
+	  ! jtransform_parse_crop_spec(&transformoption, argv[argn])) {
+	fprintf(stderr, "%s: bogus -wipe argument '%s'\n",
+		progname, argv[argn]);
+	exit(EXIT_FAILURE);
+      }
+      select_transform(JXFORM_WIPE);
+#else
+      select_transform(JXFORM_NONE);	/* force an error */
+#endif
+
+    } else {
+      usage();			/* bogus switch */
+    }
+  }
+
+  /* Post-switch-scanning cleanup */
+
+  if (for_real) {
+
+#ifdef C_PROGRESSIVE_SUPPORTED
+    if (simple_progressive)	/* process -progressive; -scans can override */
+      jpeg_simple_progression(cinfo);
+#endif
+
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+    if (scansarg != NULL)	/* process -scans if it was present */
+      if (! read_scan_script(cinfo, scansarg))
+	usage();
+#endif
+  }
+
+  return argn;			/* return index of next arg (file name) */
+}
+
+
+/*
+ * The main program.
+ */
+
+int
+main (int argc, char **argv)
+{
+  struct jpeg_decompress_struct srcinfo;
+  struct jpeg_compress_struct dstinfo;
+  struct jpeg_error_mgr jsrcerr, jdsterr;
+#ifdef PROGRESS_REPORT
+  struct cdjpeg_progress_mgr progress;
+#endif
+  jvirt_barray_ptr * src_coef_arrays;
+  jvirt_barray_ptr * dst_coef_arrays;
+  int file_index;
+  /* We assume all-in-memory processing and can therefore use only a
+   * single file pointer for sequential input and output operation. 
+   */
+  FILE * fp;
+
+  /* On Mac, fetch a command line. */
+#ifdef USE_CCOMMAND
+  argc = ccommand(&argv);
+#endif
+
+  progname = argv[0];
+  if (progname == NULL || progname[0] == 0)
+    progname = "jpegtran";	/* in case C library doesn't provide it */
+
+  /* Initialize the JPEG decompression object with default error handling. */
+  srcinfo.err = jpeg_std_error(&jsrcerr);
+  jpeg_create_decompress(&srcinfo);
+  /* Initialize the JPEG compression object with default error handling. */
+  dstinfo.err = jpeg_std_error(&jdsterr);
+  jpeg_create_compress(&dstinfo);
+
+  /* Now safe to enable signal catcher.
+   * Note: we assume only the decompression object will have virtual arrays.
+   */
+#ifdef NEED_SIGNAL_CATCHER
+  enable_signal_catcher((j_common_ptr) &srcinfo);
+#endif
+
+  /* Scan command line to find file names.
+   * It is convenient to use just one switch-parsing routine, but the switch
+   * values read here are mostly ignored; we will rescan the switches after
+   * opening the input file.  Also note that most of the switches affect the
+   * destination JPEG object, so we parse into that and then copy over what
+   * needs to affects the source too.
+   */
+
+  file_index = parse_switches(&dstinfo, argc, argv, 0, FALSE);
+  jsrcerr.trace_level = jdsterr.trace_level;
+  srcinfo.mem->max_memory_to_use = dstinfo.mem->max_memory_to_use;
+
+#ifdef TWO_FILE_COMMANDLINE
+  /* Must have either -outfile switch or explicit output file name */
+  if (outfilename == NULL) {
+    if (file_index != argc-2) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+    outfilename = argv[file_index+1];
+  } else {
+    if (file_index != argc-1) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+  }
+#else
+  /* Unix style: expect zero or one file name */
+  if (file_index < argc-1) {
+    fprintf(stderr, "%s: only one input file\n", progname);
+    usage();
+  }
+#endif /* TWO_FILE_COMMANDLINE */
+
+  /* Open the input file. */
+  if (file_index < argc) {
+    if ((fp = fopen(argv[file_index], READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s for reading\n", progname, argv[file_index]);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default input file is stdin */
+    fp = read_stdin();
+  }
+
+#ifdef PROGRESS_REPORT
+  start_progress_monitor((j_common_ptr) &dstinfo, &progress);
+#endif
+
+  /* Specify data source for decompression */
+  jpeg_stdio_src(&srcinfo, fp);
+
+  /* Enable saving of extra markers that we want to copy */
+  jcopy_markers_setup(&srcinfo, copyoption);
+
+  /* Read file header */
+  (void) jpeg_read_header(&srcinfo, TRUE);
+
+  /* Adjust default decompression parameters */
+  if (scaleoption != NULL)
+    if (sscanf(scaleoption, "%u/%u",
+	&srcinfo.scale_num, &srcinfo.scale_denom) < 1)
+      usage();
+
+  /* Any space needed by a transform option must be requested before
+   * jpeg_read_coefficients so that memory allocation will be done right.
+   */
+#if TRANSFORMS_SUPPORTED
+  /* Fail right away if -perfect is given and transformation is not perfect.
+   */
+  if (!jtransform_request_workspace(&srcinfo, &transformoption)) {
+    fprintf(stderr, "%s: transformation is not perfect\n", progname);
+    exit(EXIT_FAILURE);
+  }
+#endif
+
+  /* Read source file as DCT coefficients */
+  src_coef_arrays = jpeg_read_coefficients(&srcinfo);
+
+  /* Initialize destination compression parameters from source values */
+  jpeg_copy_critical_parameters(&srcinfo, &dstinfo);
+
+  /* Adjust destination parameters if required by transform options;
+   * also find out which set of coefficient arrays will hold the output.
+   */
+#if TRANSFORMS_SUPPORTED
+  dst_coef_arrays = jtransform_adjust_parameters(&srcinfo, &dstinfo,
+						 src_coef_arrays,
+						 &transformoption);
+#else
+  dst_coef_arrays = src_coef_arrays;
+#endif
+
+  /* Close input file, if we opened it.
+   * Note: we assume that jpeg_read_coefficients consumed all input
+   * until JPEG_REACHED_EOI, and that jpeg_finish_decompress will
+   * only consume more while (! cinfo->inputctl->eoi_reached).
+   * We cannot call jpeg_finish_decompress here since we still need the
+   * virtual arrays allocated from the source object for processing.
+   */
+  if (fp != stdin)
+    fclose(fp);
+
+  /* Open the output file. */
+  if (outfilename != NULL) {
+    if ((fp = fopen(outfilename, WRITE_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s for writing\n", progname, outfilename);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default output file is stdout */
+    fp = write_stdout();
+  }
+
+  /* Adjust default compression parameters by re-parsing the options */
+  file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE);
+
+  /* Specify data destination for compression */
+  jpeg_stdio_dest(&dstinfo, fp);
+
+  /* Start compressor (note no image data is actually written here) */
+  jpeg_write_coefficients(&dstinfo, dst_coef_arrays);
+
+  /* Copy to the output file any extra markers that we want to preserve */
+  jcopy_markers_execute(&srcinfo, &dstinfo, copyoption);
+
+  /* Execute image transformation, if any */
+#if TRANSFORMS_SUPPORTED
+  jtransform_execute_transformation(&srcinfo, &dstinfo,
+				    src_coef_arrays,
+				    &transformoption);
+#endif
+
+  /* Finish compression and release memory */
+  jpeg_finish_compress(&dstinfo);
+  jpeg_destroy_compress(&dstinfo);
+  (void) jpeg_finish_decompress(&srcinfo);
+  jpeg_destroy_decompress(&srcinfo);
+
+  /* Close output file, if we opened it */
+  if (fp != stdout)
+    fclose(fp);
+
+#ifdef PROGRESS_REPORT
+  end_progress_monitor((j_common_ptr) &dstinfo);
+#endif
+
+  /* All done. */
+  exit(jsrcerr.num_warnings + jdsterr.num_warnings ?EXIT_WARNING:EXIT_SUCCESS);
+  return 0;			/* suppress no-return-value warnings */
+}