rfreeimage 0.1.0

data/vendor/FreeImage/Source/LibJPEG/jmorecfg.h

@@ -0,0 +1,442 @@
+/*
+ * jmorecfg.h
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 1997-2013 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains additional configuration options that customize the
+ * JPEG software for special applications or support machine-dependent
+ * optimizations.  Most users will not need to touch this file.
+ */
+
+
+/*
+ * Define BITS_IN_JSAMPLE as either
+ *   8   for 8-bit sample values (the usual setting)
+ *   9   for 9-bit sample values
+ *   10  for 10-bit sample values
+ *   11  for 11-bit sample values
+ *   12  for 12-bit sample values
+ * Only 8, 9, 10, 11, and 12 bits sample data precision are supported for
+ * full-feature DCT processing.  Further depths up to 16-bit may be added
+ * later for the lossless modes of operation.
+ * Run-time selection and conversion of data precision will be added later
+ * and are currently not supported, sorry.
+ * Exception:  The transcoding part (jpegtran) supports all settings in a
+ * single instance, since it operates on the level of DCT coefficients and
+ * not sample values.  The DCT coefficients are of the same type (16 bits)
+ * in all cases (see below).
+ */
+
+#define BITS_IN_JSAMPLE  8	/* use 8, 9, 10, 11, or 12 */
+
+
+/*
+ * Maximum number of components (color channels) allowed in JPEG image.
+ * To meet the letter of the JPEG spec, set this to 255.  However, darn
+ * few applications need more than 4 channels (maybe 5 for CMYK + alpha
+ * mask).  We recommend 10 as a reasonable compromise; use 4 if you are
+ * really short on memory.  (Each allowed component costs a hundred or so
+ * bytes of storage, whether actually used in an image or not.)
+ */
+
+#define MAX_COMPONENTS  10	/* maximum number of image components */
+
+
+/*
+ * Basic data types.
+ * You may need to change these if you have a machine with unusual data
+ * type sizes; for example, "char" not 8 bits, "short" not 16 bits,
+ * or "long" not 32 bits.  We don't care whether "int" is 16 or 32 bits,
+ * but it had better be at least 16.
+ */
+
+/* Representation of a single sample (pixel element value).
+ * We frequently allocate large arrays of these, so it's important to keep
+ * them small.  But if you have memory to burn and access to char or short
+ * arrays is very slow on your hardware, you might want to change these.
+ */
+
+#if BITS_IN_JSAMPLE == 8
+/* JSAMPLE should be the smallest type that will hold the values 0..255.
+ * You can use a signed char by having GETJSAMPLE mask it with 0xFF.
+ */
+
+#ifdef HAVE_UNSIGNED_CHAR
+
+typedef unsigned char JSAMPLE;
+#define GETJSAMPLE(value)  ((int) (value))
+
+#else /* not HAVE_UNSIGNED_CHAR */
+
+typedef char JSAMPLE;
+#ifdef CHAR_IS_UNSIGNED
+#define GETJSAMPLE(value)  ((int) (value))
+#else
+#define GETJSAMPLE(value)  ((int) (value) & 0xFF)
+#endif /* CHAR_IS_UNSIGNED */
+
+#endif /* HAVE_UNSIGNED_CHAR */
+
+#define MAXJSAMPLE	255
+#define CENTERJSAMPLE	128
+
+#endif /* BITS_IN_JSAMPLE == 8 */
+
+
+#if BITS_IN_JSAMPLE == 9
+/* JSAMPLE should be the smallest type that will hold the values 0..511.
+ * On nearly all machines "short" will do nicely.
+ */
+
+typedef short JSAMPLE;
+#define GETJSAMPLE(value)  ((int) (value))
+
+#define MAXJSAMPLE	511
+#define CENTERJSAMPLE	256
+
+#endif /* BITS_IN_JSAMPLE == 9 */
+
+
+#if BITS_IN_JSAMPLE == 10
+/* JSAMPLE should be the smallest type that will hold the values 0..1023.
+ * On nearly all machines "short" will do nicely.
+ */
+
+typedef short JSAMPLE;
+#define GETJSAMPLE(value)  ((int) (value))
+
+#define MAXJSAMPLE	1023
+#define CENTERJSAMPLE	512
+
+#endif /* BITS_IN_JSAMPLE == 10 */
+
+
+#if BITS_IN_JSAMPLE == 11
+/* JSAMPLE should be the smallest type that will hold the values 0..2047.
+ * On nearly all machines "short" will do nicely.
+ */
+
+typedef short JSAMPLE;
+#define GETJSAMPLE(value)  ((int) (value))
+
+#define MAXJSAMPLE	2047
+#define CENTERJSAMPLE	1024
+
+#endif /* BITS_IN_JSAMPLE == 11 */
+
+
+#if BITS_IN_JSAMPLE == 12
+/* JSAMPLE should be the smallest type that will hold the values 0..4095.
+ * On nearly all machines "short" will do nicely.
+ */
+
+typedef short JSAMPLE;
+#define GETJSAMPLE(value)  ((int) (value))
+
+#define MAXJSAMPLE	4095
+#define CENTERJSAMPLE	2048
+
+#endif /* BITS_IN_JSAMPLE == 12 */
+
+
+/* Representation of a DCT frequency coefficient.
+ * This should be a signed value of at least 16 bits; "short" is usually OK.
+ * Again, we allocate large arrays of these, but you can change to int
+ * if you have memory to burn and "short" is really slow.
+ */
+
+typedef short JCOEF;
+
+
+/* Compressed datastreams are represented as arrays of JOCTET.
+ * These must be EXACTLY 8 bits wide, at least once they are written to
+ * external storage.  Note that when using the stdio data source/destination
+ * managers, this is also the data type passed to fread/fwrite.
+ */
+
+#ifdef HAVE_UNSIGNED_CHAR
+
+typedef unsigned char JOCTET;
+#define GETJOCTET(value)  (value)
+
+#else /* not HAVE_UNSIGNED_CHAR */
+
+typedef char JOCTET;
+#ifdef CHAR_IS_UNSIGNED
+#define GETJOCTET(value)  (value)
+#else
+#define GETJOCTET(value)  ((value) & 0xFF)
+#endif /* CHAR_IS_UNSIGNED */
+
+#endif /* HAVE_UNSIGNED_CHAR */
+
+
+/* These typedefs are used for various table entries and so forth.
+ * They must be at least as wide as specified; but making them too big
+ * won't cost a huge amount of memory, so we don't provide special
+ * extraction code like we did for JSAMPLE.  (In other words, these
+ * typedefs live at a different point on the speed/space tradeoff curve.)
+ */
+
+/* UINT8 must hold at least the values 0..255. */
+
+#ifdef HAVE_UNSIGNED_CHAR
+typedef unsigned char UINT8;
+#else /* not HAVE_UNSIGNED_CHAR */
+#ifdef CHAR_IS_UNSIGNED
+typedef char UINT8;
+#else /* not CHAR_IS_UNSIGNED */
+typedef short UINT8;
+#endif /* CHAR_IS_UNSIGNED */
+#endif /* HAVE_UNSIGNED_CHAR */
+
+/* UINT16 must hold at least the values 0..65535. */
+
+#ifdef HAVE_UNSIGNED_SHORT
+typedef unsigned short UINT16;
+#else /* not HAVE_UNSIGNED_SHORT */
+typedef unsigned int UINT16;
+#endif /* HAVE_UNSIGNED_SHORT */
+
+/* INT16 must hold at least the values -32768..32767. */
+
+#ifndef XMD_H			/* X11/xmd.h correctly defines INT16 */
+typedef short INT16;
+#endif
+
+/* INT32 must hold at least signed 32-bit values. */
+
+#ifndef XMD_H			/* X11/xmd.h correctly defines INT32 */
+#ifndef _BASETSD_H_		/* Microsoft defines it in basetsd.h */
+#ifndef _BASETSD_H		/* MinGW is slightly different */
+#ifndef QGLOBAL_H		/* Qt defines it in qglobal.h */
+typedef long INT32;
+#endif
+#endif
+#endif
+#endif
+
+/* Datatype used for image dimensions.  The JPEG standard only supports
+ * images up to 64K*64K due to 16-bit fields in SOF markers.  Therefore
+ * "unsigned int" is sufficient on all machines.  However, if you need to
+ * handle larger images and you don't mind deviating from the spec, you
+ * can change this datatype.
+ */
+
+typedef unsigned int JDIMENSION;
+
+#define JPEG_MAX_DIMENSION  65500L  /* a tad under 64K to prevent overflows */
+
+
+/* These macros are used in all function definitions and extern declarations.
+ * You could modify them if you need to change function linkage conventions;
+ * in particular, you'll need to do that to make the library a Windows DLL.
+ * Another application is to make all functions global for use with debuggers
+ * or code profilers that require it.
+ */
+
+/* a function called through method pointers: */
+#define METHODDEF(type)		static type
+/* a function used only in its module: */
+#define LOCAL(type)		static type
+/* a function referenced thru EXTERNs: */
+#define GLOBAL(type)		type
+/* a reference to a GLOBAL function: */
+#define EXTERN(type)		extern type
+
+
+/* This macro is used to declare a "method", that is, a function pointer.
+ * We want to supply prototype parameters if the compiler can cope.
+ * Note that the arglist parameter must be parenthesized!
+ * Again, you can customize this if you need special linkage keywords.
+ */
+
+#ifdef HAVE_PROTOTYPES
+#define JMETHOD(type,methodname,arglist)  type (*methodname) arglist
+#else
+#define JMETHOD(type,methodname,arglist)  type (*methodname) ()
+#endif
+
+
+/* The noreturn type identifier is used to declare functions
+ * which cannot return.
+ * Compilers can thus create more optimized code and perform
+ * better checks for warnings and errors.
+ * Static analyzer tools can make improved inferences about
+ * execution paths and are prevented from giving false alerts.
+ *
+ * Unfortunately, the proposed specifications of corresponding
+ * extensions in the Dec 2011 ISO C standard revision (C11),
+ * GCC, MSVC, etc. are not viable.
+ * Thus we introduce a user defined type to declare noreturn
+ * functions at least for clarity.  A proper compiler would
+ * have a suitable noreturn type to match in place of void.
+ */
+
+#ifndef HAVE_NORETURN_T
+typedef void noreturn_t;
+#endif
+
+
+/* Here is the pseudo-keyword for declaring pointers that must be "far"
+ * on 80x86 machines.  Most of the specialized coding for 80x86 is handled
+ * by just saying "FAR *" where such a pointer is needed.  In a few places
+ * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol.
+ */
+
+#ifndef FAR
+#ifdef NEED_FAR_POINTERS
+#define FAR  far
+#else
+#define FAR
+#endif
+#endif
+
+
+/*
+ * On a few systems, type boolean and/or its values FALSE, TRUE may appear
+ * in standard header files.  Or you may have conflicts with application-
+ * specific header files that you want to include together with these files.
+ * Defining HAVE_BOOLEAN before including jpeglib.h should make it work.
+ */
+
+#ifdef HAVE_BOOLEAN
+#ifndef FALSE			/* in case these macros already exist */
+#define FALSE	0		/* values of boolean */
+#endif
+#ifndef TRUE
+#define TRUE	1
+#endif
+#else
+typedef enum { FALSE = 0, TRUE = 1 } boolean;
+#endif
+
+
+/*
+ * The remaining options affect code selection within the JPEG library,
+ * but they don't need to be visible to most applications using the library.
+ * To minimize application namespace pollution, the symbols won't be
+ * defined unless JPEG_INTERNALS or JPEG_INTERNAL_OPTIONS has been defined.
+ */
+
+#ifdef JPEG_INTERNALS
+#define JPEG_INTERNAL_OPTIONS
+#endif
+
+#ifdef JPEG_INTERNAL_OPTIONS
+
+
+/*
+ * These defines indicate whether to include various optional functions.
+ * Undefining some of these symbols will produce a smaller but less capable
+ * library.  Note that you can leave certain source files out of the
+ * compilation/linking process if you've #undef'd the corresponding symbols.
+ * (You may HAVE to do that if your compiler doesn't like null source files.)
+ */
+
+/* Capability options common to encoder and decoder: */
+
+#define DCT_ISLOW_SUPPORTED	/* slow but accurate integer algorithm */
+#define DCT_IFAST_SUPPORTED	/* faster, less accurate integer method */
+#define DCT_FLOAT_SUPPORTED	/* floating-point: accurate, fast on fast HW */
+
+/* Encoder capability options: */
+
+#define C_ARITH_CODING_SUPPORTED    /* Arithmetic coding back end? */
+#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
+#define C_PROGRESSIVE_SUPPORTED	    /* Progressive JPEG? (Requires MULTISCAN)*/
+#define DCT_SCALING_SUPPORTED	    /* Input rescaling via DCT? (Requires DCT_ISLOW)*/
+#define ENTROPY_OPT_SUPPORTED	    /* Optimization of entropy coding parms? */
+/* Note: if you selected more than 8-bit data precision, it is dangerous to
+ * turn off ENTROPY_OPT_SUPPORTED.  The standard Huffman tables are only
+ * good for 8-bit precision, so arithmetic coding is recommended for higher
+ * precision.  The Huffman encoder normally uses entropy optimization to
+ * compute usable tables for higher precision.  Otherwise, you'll have to
+ * supply different default Huffman tables.
+ * The exact same statements apply for progressive JPEG: the default tables
+ * don't work for progressive mode.  (This may get fixed, however.)
+ */
+#define INPUT_SMOOTHING_SUPPORTED   /* Input image smoothing option? */
+
+/* Decoder capability options: */
+
+#define D_ARITH_CODING_SUPPORTED    /* Arithmetic coding back end? */
+#define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
+#define D_PROGRESSIVE_SUPPORTED	    /* Progressive JPEG? (Requires MULTISCAN)*/
+#define IDCT_SCALING_SUPPORTED	    /* Output rescaling via IDCT? (Requires DCT_ISLOW)*/
+#define SAVE_MARKERS_SUPPORTED	    /* jpeg_save_markers() needed? */
+#define BLOCK_SMOOTHING_SUPPORTED   /* Block smoothing? (Progressive only) */
+#undef  UPSAMPLE_SCALING_SUPPORTED  /* Output rescaling at upsample stage? */
+#define UPSAMPLE_MERGING_SUPPORTED  /* Fast path for sloppy upsampling? */
+#define QUANT_1PASS_SUPPORTED	    /* 1-pass color quantization? */
+#define QUANT_2PASS_SUPPORTED	    /* 2-pass color quantization? */
+
+/* more capability options later, no doubt */
+
+
+/*
+ * Ordering of RGB data in scanlines passed to or from the application.
+ * If your application wants to deal with data in the order B,G,R, just
+ * change these macros.  You can also deal with formats such as R,G,B,X
+ * (one extra byte per pixel) by changing RGB_PIXELSIZE.  Note that changing
+ * the offsets will also change the order in which colormap data is organized.
+ * RESTRICTIONS:
+ * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats.
+ * 2. The color quantizer modules will not behave desirably if RGB_PIXELSIZE
+ *    is not 3 (they don't understand about dummy color components!).  So you
+ *    can't use color quantization if you change that value.
+ */
+
+#define RGB_RED		0	/* Offset of Red in an RGB scanline element */
+#define RGB_GREEN	1	/* Offset of Green */
+#define RGB_BLUE	2	/* Offset of Blue */
+#define RGB_PIXELSIZE	3	/* JSAMPLEs per RGB scanline element */
+
+
+/* Definitions for speed-related optimizations. */
+
+
+/* If your compiler supports inline functions, define INLINE
+ * as the inline keyword; otherwise define it as empty.
+ */
+
+#ifndef INLINE
+#ifdef __GNUC__			/* for instance, GNU C knows about inline */
+#define INLINE __inline__
+#endif
+#ifndef INLINE
+#define INLINE			/* default is to define it as empty */
+#endif
+#endif
+
+
+/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying
+ * two 16-bit shorts is faster than multiplying two ints.  Define MULTIPLIER
+ * as short on such a machine.  MULTIPLIER must be at least 16 bits wide.
+ */
+
+#ifndef MULTIPLIER
+#define MULTIPLIER  int		/* type for fastest integer multiply */
+#endif
+
+
+/* FAST_FLOAT should be either float or double, whichever is done faster
+ * by your compiler.  (Note that this type is only used in the floating point
+ * DCT routines, so it only matters if you've defined DCT_FLOAT_SUPPORTED.)
+ * Typically, float is faster in ANSI C compilers, while double is faster in
+ * pre-ANSI compilers (because they insist on converting to double anyway).
+ * The code below therefore chooses float if we have ANSI-style prototypes.
+ */
+
+#ifndef FAST_FLOAT
+#ifdef HAVE_PROTOTYPES
+#define FAST_FLOAT  float
+#else
+#define FAST_FLOAT  double
+#endif
+#endif
+
+#endif /* JPEG_INTERNAL_OPTIONS */