ires 0.1.3 → 0.1.4

data/ext/vendor/golang.org/x/net/http2/write.go

@@ -0,0 +1,370 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+	"bytes"
+	"fmt"
+	"log"
+	"net/http"
+	"net/url"
+	"time"
+
+	"golang.org/x/net/http2/hpack"
+	"golang.org/x/net/lex/httplex"
+)
+
+// writeFramer is implemented by any type that is used to write frames.
+type writeFramer interface {
+	writeFrame(writeContext) error
+
+	// staysWithinBuffer reports whether this writer promises that
+	// it will only write less than or equal to size bytes, and it
+	// won't Flush the write context.
+	staysWithinBuffer(size int) bool
+}
+
+// writeContext is the interface needed by the various frame writer
+// types below. All the writeFrame methods below are scheduled via the
+// frame writing scheduler (see writeScheduler in writesched.go).
+//
+// This interface is implemented by *serverConn.
+//
+// TODO: decide whether to a) use this in the client code (which didn't
+// end up using this yet, because it has a simpler design, not
+// currently implementing priorities), or b) delete this and
+// make the server code a bit more concrete.
+type writeContext interface {
+	Framer() *Framer
+	Flush() error
+	CloseConn() error
+	// HeaderEncoder returns an HPACK encoder that writes to the
+	// returned buffer.
+	HeaderEncoder() (*hpack.Encoder, *bytes.Buffer)
+}
+
+// writeEndsStream reports whether w writes a frame that will transition
+// the stream to a half-closed local state. This returns false for RST_STREAM,
+// which closes the entire stream (not just the local half).
+func writeEndsStream(w writeFramer) bool {
+	switch v := w.(type) {
+	case *writeData:
+		return v.endStream
+	case *writeResHeaders:
+		return v.endStream
+	case nil:
+		// This can only happen if the caller reuses w after it's
+		// been intentionally nil'ed out to prevent use. Keep this
+		// here to catch future refactoring breaking it.
+		panic("writeEndsStream called on nil writeFramer")
+	}
+	return false
+}
+
+type flushFrameWriter struct{}
+
+func (flushFrameWriter) writeFrame(ctx writeContext) error {
+	return ctx.Flush()
+}
+
+func (flushFrameWriter) staysWithinBuffer(max int) bool { return false }
+
+type writeSettings []Setting
+
+func (s writeSettings) staysWithinBuffer(max int) bool {
+	const settingSize = 6 // uint16 + uint32
+	return frameHeaderLen+settingSize*len(s) <= max
+
+}
+
+func (s writeSettings) writeFrame(ctx writeContext) error {
+	return ctx.Framer().WriteSettings([]Setting(s)...)
+}
+
+type writeGoAway struct {
+	maxStreamID uint32
+	code        ErrCode
+}
+
+func (p *writeGoAway) writeFrame(ctx writeContext) error {
+	err := ctx.Framer().WriteGoAway(p.maxStreamID, p.code, nil)
+	if p.code != 0 {
+		ctx.Flush() // ignore error: we're hanging up on them anyway
+		time.Sleep(50 * time.Millisecond)
+		ctx.CloseConn()
+	}
+	return err
+}
+
+func (*writeGoAway) staysWithinBuffer(max int) bool { return false } // flushes
+
+type writeData struct {
+	streamID  uint32
+	p         []byte
+	endStream bool
+}
+
+func (w *writeData) String() string {
+	return fmt.Sprintf("writeData(stream=%d, p=%d, endStream=%v)", w.streamID, len(w.p), w.endStream)
+}
+
+func (w *writeData) writeFrame(ctx writeContext) error {
+	return ctx.Framer().WriteData(w.streamID, w.endStream, w.p)
+}
+
+func (w *writeData) staysWithinBuffer(max int) bool {
+	return frameHeaderLen+len(w.p) <= max
+}
+
+// handlerPanicRST is the message sent from handler goroutines when
+// the handler panics.
+type handlerPanicRST struct {
+	StreamID uint32
+}
+
+func (hp handlerPanicRST) writeFrame(ctx writeContext) error {
+	return ctx.Framer().WriteRSTStream(hp.StreamID, ErrCodeInternal)
+}
+
+func (hp handlerPanicRST) staysWithinBuffer(max int) bool { return frameHeaderLen+4 <= max }
+
+func (se StreamError) writeFrame(ctx writeContext) error {
+	return ctx.Framer().WriteRSTStream(se.StreamID, se.Code)
+}
+
+func (se StreamError) staysWithinBuffer(max int) bool { return frameHeaderLen+4 <= max }
+
+type writePingAck struct{ pf *PingFrame }
+
+func (w writePingAck) writeFrame(ctx writeContext) error {
+	return ctx.Framer().WritePing(true, w.pf.Data)
+}
+
+func (w writePingAck) staysWithinBuffer(max int) bool { return frameHeaderLen+len(w.pf.Data) <= max }
+
+type writeSettingsAck struct{}
+
+func (writeSettingsAck) writeFrame(ctx writeContext) error {
+	return ctx.Framer().WriteSettingsAck()
+}
+
+func (writeSettingsAck) staysWithinBuffer(max int) bool { return frameHeaderLen <= max }
+
+// splitHeaderBlock splits headerBlock into fragments so that each fragment fits
+// in a single frame, then calls fn for each fragment. firstFrag/lastFrag are true
+// for the first/last fragment, respectively.
+func splitHeaderBlock(ctx writeContext, headerBlock []byte, fn func(ctx writeContext, frag []byte, firstFrag, lastFrag bool) error) error {
+	// For now we're lazy and just pick the minimum MAX_FRAME_SIZE
+	// that all peers must support (16KB). Later we could care
+	// more and send larger frames if the peer advertised it, but
+	// there's little point. Most headers are small anyway (so we
+	// generally won't have CONTINUATION frames), and extra frames
+	// only waste 9 bytes anyway.
+	const maxFrameSize = 16384
+
+	first := true
+	for len(headerBlock) > 0 {
+		frag := headerBlock
+		if len(frag) > maxFrameSize {
+			frag = frag[:maxFrameSize]
+		}
+		headerBlock = headerBlock[len(frag):]
+		if err := fn(ctx, frag, first, len(headerBlock) == 0); err != nil {
+			return err
+		}
+		first = false
+	}
+	return nil
+}
+
+// writeResHeaders is a request to write a HEADERS and 0+ CONTINUATION frames
+// for HTTP response headers or trailers from a server handler.
+type writeResHeaders struct {
+	streamID    uint32
+	httpResCode int         // 0 means no ":status" line
+	h           http.Header // may be nil
+	trailers    []string    // if non-nil, which keys of h to write. nil means all.
+	endStream   bool
+
+	date          string
+	contentType   string
+	contentLength string
+}
+
+func encKV(enc *hpack.Encoder, k, v string) {
+	if VerboseLogs {
+		log.Printf("http2: server encoding header %q = %q", k, v)
+	}
+	enc.WriteField(hpack.HeaderField{Name: k, Value: v})
+}
+
+func (w *writeResHeaders) staysWithinBuffer(max int) bool {
+	// TODO: this is a common one. It'd be nice to return true
+	// here and get into the fast path if we could be clever and
+	// calculate the size fast enough, or at least a conservative
+	// uppper bound that usually fires. (Maybe if w.h and
+	// w.trailers are nil, so we don't need to enumerate it.)
+	// Otherwise I'm afraid that just calculating the length to
+	// answer this question would be slower than the ~2µs benefit.
+	return false
+}
+
+func (w *writeResHeaders) writeFrame(ctx writeContext) error {
+	enc, buf := ctx.HeaderEncoder()
+	buf.Reset()
+
+	if w.httpResCode != 0 {
+		encKV(enc, ":status", httpCodeString(w.httpResCode))
+	}
+
+	encodeHeaders(enc, w.h, w.trailers)
+
+	if w.contentType != "" {
+		encKV(enc, "content-type", w.contentType)
+	}
+	if w.contentLength != "" {
+		encKV(enc, "content-length", w.contentLength)
+	}
+	if w.date != "" {
+		encKV(enc, "date", w.date)
+	}
+
+	headerBlock := buf.Bytes()
+	if len(headerBlock) == 0 && w.trailers == nil {
+		panic("unexpected empty hpack")
+	}
+
+	return splitHeaderBlock(ctx, headerBlock, w.writeHeaderBlock)
+}
+
+func (w *writeResHeaders) writeHeaderBlock(ctx writeContext, frag []byte, firstFrag, lastFrag bool) error {
+	if firstFrag {
+		return ctx.Framer().WriteHeaders(HeadersFrameParam{
+			StreamID:      w.streamID,
+			BlockFragment: frag,
+			EndStream:     w.endStream,
+			EndHeaders:    lastFrag,
+		})
+	} else {
+		return ctx.Framer().WriteContinuation(w.streamID, lastFrag, frag)
+	}
+}
+
+// writePushPromise is a request to write a PUSH_PROMISE and 0+ CONTINUATION frames.
+type writePushPromise struct {
+	streamID uint32   // pusher stream
+	method   string   // for :method
+	url      *url.URL // for :scheme, :authority, :path
+	h        http.Header
+
+	// Creates an ID for a pushed stream. This runs on serveG just before
+	// the frame is written. The returned ID is copied to promisedID.
+	allocatePromisedID func() (uint32, error)
+	promisedID         uint32
+}
+
+func (w *writePushPromise) staysWithinBuffer(max int) bool {
+	// TODO: see writeResHeaders.staysWithinBuffer
+	return false
+}
+
+func (w *writePushPromise) writeFrame(ctx writeContext) error {
+	enc, buf := ctx.HeaderEncoder()
+	buf.Reset()
+
+	encKV(enc, ":method", w.method)
+	encKV(enc, ":scheme", w.url.Scheme)
+	encKV(enc, ":authority", w.url.Host)
+	encKV(enc, ":path", w.url.RequestURI())
+	encodeHeaders(enc, w.h, nil)
+
+	headerBlock := buf.Bytes()
+	if len(headerBlock) == 0 {
+		panic("unexpected empty hpack")
+	}
+
+	return splitHeaderBlock(ctx, headerBlock, w.writeHeaderBlock)
+}
+
+func (w *writePushPromise) writeHeaderBlock(ctx writeContext, frag []byte, firstFrag, lastFrag bool) error {
+	if firstFrag {
+		return ctx.Framer().WritePushPromise(PushPromiseParam{
+			StreamID:      w.streamID,
+			PromiseID:     w.promisedID,
+			BlockFragment: frag,
+			EndHeaders:    lastFrag,
+		})
+	} else {
+		return ctx.Framer().WriteContinuation(w.streamID, lastFrag, frag)
+	}
+}
+
+type write100ContinueHeadersFrame struct {
+	streamID uint32
+}
+
+func (w write100ContinueHeadersFrame) writeFrame(ctx writeContext) error {
+	enc, buf := ctx.HeaderEncoder()
+	buf.Reset()
+	encKV(enc, ":status", "100")
+	return ctx.Framer().WriteHeaders(HeadersFrameParam{
+		StreamID:      w.streamID,
+		BlockFragment: buf.Bytes(),
+		EndStream:     false,
+		EndHeaders:    true,
+	})
+}
+
+func (w write100ContinueHeadersFrame) staysWithinBuffer(max int) bool {
+	// Sloppy but conservative:
+	return 9+2*(len(":status")+len("100")) <= max
+}
+
+type writeWindowUpdate struct {
+	streamID uint32 // or 0 for conn-level
+	n        uint32
+}
+
+func (wu writeWindowUpdate) staysWithinBuffer(max int) bool { return frameHeaderLen+4 <= max }
+
+func (wu writeWindowUpdate) writeFrame(ctx writeContext) error {
+	return ctx.Framer().WriteWindowUpdate(wu.streamID, wu.n)
+}
+
+// encodeHeaders encodes an http.Header. If keys is not nil, then (k, h[k])
+// is encoded only only if k is in keys.
+func encodeHeaders(enc *hpack.Encoder, h http.Header, keys []string) {
+	if keys == nil {
+		sorter := sorterPool.Get().(*sorter)
+		// Using defer here, since the returned keys from the
+		// sorter.Keys method is only valid until the sorter
+		// is returned:
+		defer sorterPool.Put(sorter)
+		keys = sorter.Keys(h)
+	}
+	for _, k := range keys {
+		vv := h[k]
+		k = lowerHeader(k)
+		if !validWireHeaderFieldName(k) {
+			// Skip it as backup paranoia. Per
+			// golang.org/issue/14048, these should
+			// already be rejected at a higher level.
+			continue
+		}
+		isTE := k == "transfer-encoding"
+		for _, v := range vv {
+			if !httplex.ValidHeaderFieldValue(v) {
+				// TODO: return an error? golang.org/issue/14048
+				// For now just omit it.
+				continue
+			}
+			// TODO: more of "8.1.2.2 Connection-Specific Header Fields"
+			if isTE && v != "trailers" {
+				continue
+			}
+			encKV(enc, k, v)
+		}
+	}
+}

data/ext/vendor/golang.org/x/net/http2/writesched.go

@@ -0,0 +1,242 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import "fmt"
+
+// WriteScheduler is the interface implemented by HTTP/2 write schedulers.
+// Methods are never called concurrently.
+type WriteScheduler interface {
+	// OpenStream opens a new stream in the write scheduler.
+	// It is illegal to call this with streamID=0 or with a streamID that is
+	// already open -- the call may panic.
+	OpenStream(streamID uint32, options OpenStreamOptions)
+
+	// CloseStream closes a stream in the write scheduler. Any frames queued on
+	// this stream should be discarded. It is illegal to call this on a stream
+	// that is not open -- the call may panic.
+	CloseStream(streamID uint32)
+
+	// AdjustStream adjusts the priority of the given stream. This may be called
+	// on a stream that has not yet been opened or has been closed. Note that
+	// RFC 7540 allows PRIORITY frames to be sent on streams in any state. See:
+	// https://tools.ietf.org/html/rfc7540#section-5.1
+	AdjustStream(streamID uint32, priority PriorityParam)
+
+	// Push queues a frame in the scheduler. In most cases, this will not be
+	// called with wr.StreamID()!=0 unless that stream is currently open. The one
+	// exception is RST_STREAM frames, which may be sent on idle or closed streams.
+	Push(wr FrameWriteRequest)
+
+	// Pop dequeues the next frame to write. Returns false if no frames can
+	// be written. Frames with a given wr.StreamID() are Pop'd in the same
+	// order they are Push'd.
+	Pop() (wr FrameWriteRequest, ok bool)
+}
+
+// OpenStreamOptions specifies extra options for WriteScheduler.OpenStream.
+type OpenStreamOptions struct {
+	// PusherID is zero if the stream was initiated by the client. Otherwise,
+	// PusherID names the stream that pushed the newly opened stream.
+	PusherID uint32
+}
+
+// FrameWriteRequest is a request to write a frame.
+type FrameWriteRequest struct {
+	// write is the interface value that does the writing, once the
+	// WriteScheduler has selected this frame to write. The write
+	// functions are all defined in write.go.
+	write writeFramer
+
+	// stream is the stream on which this frame will be written.
+	// nil for non-stream frames like PING and SETTINGS.
+	stream *stream
+
+	// done, if non-nil, must be a buffered channel with space for
+	// 1 message and is sent the return value from write (or an
+	// earlier error) when the frame has been written.
+	done chan error
+}
+
+// StreamID returns the id of the stream this frame will be written to.
+// 0 is used for non-stream frames such as PING and SETTINGS.
+func (wr FrameWriteRequest) StreamID() uint32 {
+	if wr.stream == nil {
+		if se, ok := wr.write.(StreamError); ok {
+			// (*serverConn).resetStream doesn't set
+			// stream because it doesn't necessarily have
+			// one. So special case this type of write
+			// message.
+			return se.StreamID
+		}
+		return 0
+	}
+	return wr.stream.id
+}
+
+// DataSize returns the number of flow control bytes that must be consumed
+// to write this entire frame. This is 0 for non-DATA frames.
+func (wr FrameWriteRequest) DataSize() int {
+	if wd, ok := wr.write.(*writeData); ok {
+		return len(wd.p)
+	}
+	return 0
+}
+
+// Consume consumes min(n, available) bytes from this frame, where available
+// is the number of flow control bytes available on the stream. Consume returns
+// 0, 1, or 2 frames, where the integer return value gives the number of frames
+// returned.
+//
+// If flow control prevents consuming any bytes, this returns (_, _, 0). If
+// the entire frame was consumed, this returns (wr, _, 1). Otherwise, this
+// returns (consumed, rest, 2), where 'consumed' contains the consumed bytes and
+// 'rest' contains the remaining bytes. The consumed bytes are deducted from the
+// underlying stream's flow control budget.
+func (wr FrameWriteRequest) Consume(n int32) (FrameWriteRequest, FrameWriteRequest, int) {
+	var empty FrameWriteRequest
+
+	// Non-DATA frames are always consumed whole.
+	wd, ok := wr.write.(*writeData)
+	if !ok || len(wd.p) == 0 {
+		return wr, empty, 1
+	}
+
+	// Might need to split after applying limits.
+	allowed := wr.stream.flow.available()
+	if n < allowed {
+		allowed = n
+	}
+	if wr.stream.sc.maxFrameSize < allowed {
+		allowed = wr.stream.sc.maxFrameSize
+	}
+	if allowed <= 0 {
+		return empty, empty, 0
+	}
+	if len(wd.p) > int(allowed) {
+		wr.stream.flow.take(allowed)
+		consumed := FrameWriteRequest{
+			stream: wr.stream,
+			write: &writeData{
+				streamID: wd.streamID,
+				p:        wd.p[:allowed],
+				// Even if the original had endStream set, there
+				// are bytes remaining because len(wd.p) > allowed,
+				// so we know endStream is false.
+				endStream: false,
+			},
+			// Our caller is blocking on the final DATA frame, not
+			// this intermediate frame, so no need to wait.
+			done: nil,
+		}
+		rest := FrameWriteRequest{
+			stream: wr.stream,
+			write: &writeData{
+				streamID:  wd.streamID,
+				p:         wd.p[allowed:],
+				endStream: wd.endStream,
+			},
+			done: wr.done,
+		}
+		return consumed, rest, 2
+	}
+
+	// The frame is consumed whole.
+	// NB: This cast cannot overflow because allowed is <= math.MaxInt32.
+	wr.stream.flow.take(int32(len(wd.p)))
+	return wr, empty, 1
+}
+
+// String is for debugging only.
+func (wr FrameWriteRequest) String() string {
+	var des string
+	if s, ok := wr.write.(fmt.Stringer); ok {
+		des = s.String()
+	} else {
+		des = fmt.Sprintf("%T", wr.write)
+	}
+	return fmt.Sprintf("[FrameWriteRequest stream=%d, ch=%v, writer=%v]", wr.StreamID(), wr.done != nil, des)
+}
+
+// replyToWriter sends err to wr.done and panics if the send must block
+// This does nothing if wr.done is nil.
+func (wr *FrameWriteRequest) replyToWriter(err error) {
+	if wr.done == nil {
+		return
+	}
+	select {
+	case wr.done <- err:
+	default:
+		panic(fmt.Sprintf("unbuffered done channel passed in for type %T", wr.write))
+	}
+	wr.write = nil // prevent use (assume it's tainted after wr.done send)
+}
+
+// writeQueue is used by implementations of WriteScheduler.
+type writeQueue struct {
+	s []FrameWriteRequest
+}
+
+func (q *writeQueue) empty() bool { return len(q.s) == 0 }
+
+func (q *writeQueue) push(wr FrameWriteRequest) {
+	q.s = append(q.s, wr)
+}
+
+func (q *writeQueue) shift() FrameWriteRequest {
+	if len(q.s) == 0 {
+		panic("invalid use of queue")
+	}
+	wr := q.s[0]
+	// TODO: less copy-happy queue.
+	copy(q.s, q.s[1:])
+	q.s[len(q.s)-1] = FrameWriteRequest{}
+	q.s = q.s[:len(q.s)-1]
+	return wr
+}
+
+// consume consumes up to n bytes from q.s[0]. If the frame is
+// entirely consumed, it is removed from the queue. If the frame
+// is partially consumed, the frame is kept with the consumed
+// bytes removed. Returns true iff any bytes were consumed.
+func (q *writeQueue) consume(n int32) (FrameWriteRequest, bool) {
+	if len(q.s) == 0 {
+		return FrameWriteRequest{}, false
+	}
+	consumed, rest, numresult := q.s[0].Consume(n)
+	switch numresult {
+	case 0:
+		return FrameWriteRequest{}, false
+	case 1:
+		q.shift()
+	case 2:
+		q.s[0] = rest
+	}
+	return consumed, true
+}
+
+type writeQueuePool []*writeQueue
+
+// put inserts an unused writeQueue into the pool.
+func (p *writeQueuePool) put(q *writeQueue) {
+	for i := range q.s {
+		q.s[i] = FrameWriteRequest{}
+	}
+	q.s = q.s[:0]
+	*p = append(*p, q)
+}
+
+// get returns an empty writeQueue.
+func (p *writeQueuePool) get() *writeQueue {
+	ln := len(*p)
+	if ln == 0 {
+		return new(writeQueue)
+	}
+	x := ln - 1
+	q := (*p)[x]
+	(*p)[x] = nil
+	*p = (*p)[:x]
+	return q
+}