grpc 1.21.0 → 1.32.0

data/third_party/boringssl/include/openssl/blowfish.h

@@ -1,93 +0,0 @@
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.] */
-
-#ifndef OPENSSL_HEADER_BLOWFISH_H
-#define OPENSSL_HEADER_BLOWFISH_H
-
-#include <openssl/base.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-
-#define BF_ENCRYPT 1
-#define BF_DECRYPT 0
-
-#define BF_ROUNDS 16
-#define BF_BLOCK 8
-
-typedef struct bf_key_st {
-  uint32_t P[BF_ROUNDS + 2];
-  uint32_t S[4 * 256];
-} BF_KEY;
-
-OPENSSL_EXPORT void BF_set_key(BF_KEY *key, size_t len, const uint8_t *data);
-OPENSSL_EXPORT void BF_encrypt(uint32_t *data, const BF_KEY *key);
-OPENSSL_EXPORT void BF_decrypt(uint32_t *data, const BF_KEY *key);
-
-OPENSSL_EXPORT void BF_ecb_encrypt(const uint8_t *in, uint8_t *out,
-                                   const BF_KEY *key, int enc);
-OPENSSL_EXPORT void BF_cbc_encrypt(const uint8_t *in, uint8_t *out, long length,
-                                   const BF_KEY *schedule, uint8_t *ivec,
-                                   int enc);
-
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif  // OPENSSL_HEADER_BLOWFISH_H

data/third_party/boringssl/include/openssl/bn.h

@@ -1,1019 +0,0 @@
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the Eric Young open source
- * license provided above.
- *
- * The binary polynomial arithmetic software is originally written by
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems
- * Laboratories. */
-
-#ifndef OPENSSL_HEADER_BN_H
-#define OPENSSL_HEADER_BN_H
-
-#include <openssl/base.h>
-#include <openssl/thread.h>
-
-#include <inttypes.h>  // for PRIu64 and friends
-#include <stdio.h>  // for FILE*
-
-#if defined(__cplusplus)
-extern "C" {
-#endif
-
-
-// BN provides support for working with arbitrary sized integers. For example,
-// although the largest integer supported by the compiler might be 64 bits, BN
-// will allow you to work with numbers until you run out of memory.
-
-
-// BN_ULONG is the native word size when working with big integers.
-//
-// Note: on some platforms, inttypes.h does not define print format macros in
-// C++ unless |__STDC_FORMAT_MACROS| defined. As this is a public header, bn.h
-// does not define |__STDC_FORMAT_MACROS| itself. C++ source files which use the
-// FMT macros must define it externally.
-#if defined(OPENSSL_64_BIT)
-#define BN_ULONG uint64_t
-#define BN_BITS2 64
-#define BN_DEC_FMT1 "%" PRIu64
-#define BN_DEC_FMT2 "%019" PRIu64
-#define BN_HEX_FMT1 "%" PRIx64
-#define BN_HEX_FMT2 "%016" PRIx64
-#elif defined(OPENSSL_32_BIT)
-#define BN_ULONG uint32_t
-#define BN_BITS2 32
-#define BN_DEC_FMT1 "%" PRIu32
-#define BN_DEC_FMT2 "%09" PRIu32
-#define BN_HEX_FMT1 "%" PRIx32
-#define BN_HEX_FMT2 "%08" PRIx64
-#else
-#error "Must define either OPENSSL_32_BIT or OPENSSL_64_BIT"
-#endif
-
-
-// Allocation and freeing.
-
-// BN_new creates a new, allocated BIGNUM and initialises it.
-OPENSSL_EXPORT BIGNUM *BN_new(void);
-
-// BN_init initialises a stack allocated |BIGNUM|.
-OPENSSL_EXPORT void BN_init(BIGNUM *bn);
-
-// BN_free frees the data referenced by |bn| and, if |bn| was originally
-// allocated on the heap, frees |bn| also.
-OPENSSL_EXPORT void BN_free(BIGNUM *bn);
-
-// BN_clear_free erases and frees the data referenced by |bn| and, if |bn| was
-// originally allocated on the heap, frees |bn| also.
-OPENSSL_EXPORT void BN_clear_free(BIGNUM *bn);
-
-// BN_dup allocates a new BIGNUM and sets it equal to |src|. It returns the
-// allocated BIGNUM on success or NULL otherwise.
-OPENSSL_EXPORT BIGNUM *BN_dup(const BIGNUM *src);
-
-// BN_copy sets |dest| equal to |src| and returns |dest| or NULL on allocation
-// failure.
-OPENSSL_EXPORT BIGNUM *BN_copy(BIGNUM *dest, const BIGNUM *src);
-
-// BN_clear sets |bn| to zero and erases the old data.
-OPENSSL_EXPORT void BN_clear(BIGNUM *bn);
-
-// BN_value_one returns a static BIGNUM with value 1.
-OPENSSL_EXPORT const BIGNUM *BN_value_one(void);
-
-
-// Basic functions.
-
-// BN_num_bits returns the minimum number of bits needed to represent the
-// absolute value of |bn|.
-OPENSSL_EXPORT unsigned BN_num_bits(const BIGNUM *bn);
-
-// BN_num_bytes returns the minimum number of bytes needed to represent the
-// absolute value of |bn|.
-OPENSSL_EXPORT unsigned BN_num_bytes(const BIGNUM *bn);
-
-// BN_zero sets |bn| to zero.
-OPENSSL_EXPORT void BN_zero(BIGNUM *bn);
-
-// BN_one sets |bn| to one. It returns one on success or zero on allocation
-// failure.
-OPENSSL_EXPORT int BN_one(BIGNUM *bn);
-
-// BN_set_word sets |bn| to |value|. It returns one on success or zero on
-// allocation failure.
-OPENSSL_EXPORT int BN_set_word(BIGNUM *bn, BN_ULONG value);
-
-// BN_set_u64 sets |bn| to |value|. It returns one on success or zero on
-// allocation failure.
-OPENSSL_EXPORT int BN_set_u64(BIGNUM *bn, uint64_t value);
-
-// BN_set_negative sets the sign of |bn|.
-OPENSSL_EXPORT void BN_set_negative(BIGNUM *bn, int sign);
-
-// BN_is_negative returns one if |bn| is negative and zero otherwise.
-OPENSSL_EXPORT int BN_is_negative(const BIGNUM *bn);
-
-
-// Conversion functions.
-
-// BN_bin2bn sets |*ret| to the value of |len| bytes from |in|, interpreted as
-// a big-endian number, and returns |ret|. If |ret| is NULL then a fresh
-// |BIGNUM| is allocated and returned. It returns NULL on allocation
-// failure.
-OPENSSL_EXPORT BIGNUM *BN_bin2bn(const uint8_t *in, size_t len, BIGNUM *ret);
-
-// BN_bn2bin serialises the absolute value of |in| to |out| as a big-endian
-// integer, which must have |BN_num_bytes| of space available. It returns the
-// number of bytes written. Note this function leaks the magnitude of |in|. If
-// |in| is secret, use |BN_bn2bin_padded| instead.
-OPENSSL_EXPORT size_t BN_bn2bin(const BIGNUM *in, uint8_t *out);
-
-// BN_le2bn sets |*ret| to the value of |len| bytes from |in|, interpreted as
-// a little-endian number, and returns |ret|. If |ret| is NULL then a fresh
-// |BIGNUM| is allocated and returned. It returns NULL on allocation
-// failure.
-OPENSSL_EXPORT BIGNUM *BN_le2bn(const uint8_t *in, size_t len, BIGNUM *ret);
-
-// BN_bn2le_padded serialises the absolute value of |in| to |out| as a
-// little-endian integer, which must have |len| of space available, padding
-// out the remainder of out with zeros. If |len| is smaller than |BN_num_bytes|,
-// the function fails and returns 0. Otherwise, it returns 1.
-OPENSSL_EXPORT int BN_bn2le_padded(uint8_t *out, size_t len, const BIGNUM *in);
-
-// BN_bn2bin_padded serialises the absolute value of |in| to |out| as a
-// big-endian integer. The integer is padded with leading zeros up to size
-// |len|. If |len| is smaller than |BN_num_bytes|, the function fails and
-// returns 0. Otherwise, it returns 1.
-OPENSSL_EXPORT int BN_bn2bin_padded(uint8_t *out, size_t len, const BIGNUM *in);
-
-// BN_bn2cbb_padded behaves like |BN_bn2bin_padded| but writes to a |CBB|.
-OPENSSL_EXPORT int BN_bn2cbb_padded(CBB *out, size_t len, const BIGNUM *in);
-
-// BN_bn2hex returns an allocated string that contains a NUL-terminated, hex
-// representation of |bn|. If |bn| is negative, the first char in the resulting
-// string will be '-'. Returns NULL on allocation failure.
-OPENSSL_EXPORT char *BN_bn2hex(const BIGNUM *bn);
-
-// BN_hex2bn parses the leading hex number from |in|, which may be proceeded by
-// a '-' to indicate a negative number and may contain trailing, non-hex data.
-// If |outp| is not NULL, it constructs a BIGNUM equal to the hex number and
-// stores it in |*outp|. If |*outp| is NULL then it allocates a new BIGNUM and
-// updates |*outp|. It returns the number of bytes of |in| processed or zero on
-// error.
-OPENSSL_EXPORT int BN_hex2bn(BIGNUM **outp, const char *in);
-
-// BN_bn2dec returns an allocated string that contains a NUL-terminated,
-// decimal representation of |bn|. If |bn| is negative, the first char in the
-// resulting string will be '-'. Returns NULL on allocation failure.
-OPENSSL_EXPORT char *BN_bn2dec(const BIGNUM *a);
-
-// BN_dec2bn parses the leading decimal number from |in|, which may be
-// proceeded by a '-' to indicate a negative number and may contain trailing,
-// non-decimal data. If |outp| is not NULL, it constructs a BIGNUM equal to the
-// decimal number and stores it in |*outp|. If |*outp| is NULL then it
-// allocates a new BIGNUM and updates |*outp|. It returns the number of bytes
-// of |in| processed or zero on error.
-OPENSSL_EXPORT int BN_dec2bn(BIGNUM **outp, const char *in);
-
-// BN_asc2bn acts like |BN_dec2bn| or |BN_hex2bn| depending on whether |in|
-// begins with "0X" or "0x" (indicating hex) or not (indicating decimal). A
-// leading '-' is still permitted and comes before the optional 0X/0x. It
-// returns one on success or zero on error.
-OPENSSL_EXPORT int BN_asc2bn(BIGNUM **outp, const char *in);
-
-// BN_print writes a hex encoding of |a| to |bio|. It returns one on success
-// and zero on error.
-OPENSSL_EXPORT int BN_print(BIO *bio, const BIGNUM *a);
-
-// BN_print_fp acts like |BIO_print|, but wraps |fp| in a |BIO| first.
-OPENSSL_EXPORT int BN_print_fp(FILE *fp, const BIGNUM *a);
-
-// BN_get_word returns the absolute value of |bn| as a single word. If |bn| is
-// too large to be represented as a single word, the maximum possible value
-// will be returned.
-OPENSSL_EXPORT BN_ULONG BN_get_word(const BIGNUM *bn);
-
-// BN_get_u64 sets |*out| to the absolute value of |bn| as a |uint64_t| and
-// returns one. If |bn| is too large to be represented as a |uint64_t|, it
-// returns zero.
-OPENSSL_EXPORT int BN_get_u64(const BIGNUM *bn, uint64_t *out);
-
-
-// ASN.1 functions.
-
-// BN_parse_asn1_unsigned parses a non-negative DER INTEGER from |cbs| writes
-// the result to |ret|. It returns one on success and zero on failure.
-OPENSSL_EXPORT int BN_parse_asn1_unsigned(CBS *cbs, BIGNUM *ret);
-
-// BN_marshal_asn1 marshals |bn| as a non-negative DER INTEGER and appends the
-// result to |cbb|. It returns one on success and zero on failure.
-OPENSSL_EXPORT int BN_marshal_asn1(CBB *cbb, const BIGNUM *bn);
-
-
-// BIGNUM pools.
-//
-// Certain BIGNUM operations need to use many temporary variables and
-// allocating and freeing them can be quite slow. Thus such operations typically
-// take a |BN_CTX| parameter, which contains a pool of |BIGNUMs|. The |ctx|
-// argument to a public function may be NULL, in which case a local |BN_CTX|
-// will be created just for the lifetime of that call.
-//
-// A function must call |BN_CTX_start| first. Then, |BN_CTX_get| may be called
-// repeatedly to obtain temporary |BIGNUM|s. All |BN_CTX_get| calls must be made
-// before calling any other functions that use the |ctx| as an argument.
-//
-// Finally, |BN_CTX_end| must be called before returning from the function.
-// When |BN_CTX_end| is called, the |BIGNUM| pointers obtained from
-// |BN_CTX_get| become invalid.
-
-// BN_CTX_new returns a new, empty BN_CTX or NULL on allocation failure.
-OPENSSL_EXPORT BN_CTX *BN_CTX_new(void);
-
-// BN_CTX_free frees all BIGNUMs contained in |ctx| and then frees |ctx|
-// itself.
-OPENSSL_EXPORT void BN_CTX_free(BN_CTX *ctx);
-
-// BN_CTX_start "pushes" a new entry onto the |ctx| stack and allows future
-// calls to |BN_CTX_get|.
-OPENSSL_EXPORT void BN_CTX_start(BN_CTX *ctx);
-
-// BN_CTX_get returns a new |BIGNUM|, or NULL on allocation failure. Once
-// |BN_CTX_get| has returned NULL, all future calls will also return NULL until
-// |BN_CTX_end| is called.
-OPENSSL_EXPORT BIGNUM *BN_CTX_get(BN_CTX *ctx);
-
-// BN_CTX_end invalidates all |BIGNUM|s returned from |BN_CTX_get| since the
-// matching |BN_CTX_start| call.
-OPENSSL_EXPORT void BN_CTX_end(BN_CTX *ctx);
-
-
-// Simple arithmetic
-
-// BN_add sets |r| = |a| + |b|, where |r| may be the same pointer as either |a|
-// or |b|. It returns one on success and zero on allocation failure.
-OPENSSL_EXPORT int BN_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
-
-// BN_uadd sets |r| = |a| + |b|, where |a| and |b| are non-negative and |r| may
-// be the same pointer as either |a| or |b|. It returns one on success and zero
-// on allocation failure.
-OPENSSL_EXPORT int BN_uadd(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
-
-// BN_add_word adds |w| to |a|. It returns one on success and zero otherwise.
-OPENSSL_EXPORT int BN_add_word(BIGNUM *a, BN_ULONG w);
-
-// BN_sub sets |r| = |a| - |b|, where |r| may be the same pointer as either |a|
-// or |b|. It returns one on success and zero on allocation failure.
-OPENSSL_EXPORT int BN_sub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
-
-// BN_usub sets |r| = |a| - |b|, where |a| and |b| are non-negative integers,
-// |b| < |a| and |r| may be the same pointer as either |a| or |b|. It returns
-// one on success and zero on allocation failure.
-OPENSSL_EXPORT int BN_usub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
-
-// BN_sub_word subtracts |w| from |a|. It returns one on success and zero on
-// allocation failure.
-OPENSSL_EXPORT int BN_sub_word(BIGNUM *a, BN_ULONG w);
-
-// BN_mul sets |r| = |a| * |b|, where |r| may be the same pointer as |a| or
-// |b|. Returns one on success and zero otherwise.
-OPENSSL_EXPORT int BN_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-                          BN_CTX *ctx);
-
-// BN_mul_word sets |bn| = |bn| * |w|. It returns one on success or zero on
-// allocation failure.
-OPENSSL_EXPORT int BN_mul_word(BIGNUM *bn, BN_ULONG w);
-
-// BN_sqr sets |r| = |a|^2 (i.e. squares), where |r| may be the same pointer as
-// |a|. Returns one on success and zero otherwise. This is more efficient than
-// BN_mul(r, a, a, ctx).
-OPENSSL_EXPORT int BN_sqr(BIGNUM *r, const BIGNUM *a, BN_CTX *ctx);
-
-// BN_div divides |numerator| by |divisor| and places the result in |quotient|
-// and the remainder in |rem|. Either of |quotient| or |rem| may be NULL, in
-// which case the respective value is not returned. The result is rounded
-// towards zero; thus if |numerator| is negative, the remainder will be zero or
-// negative. It returns one on success or zero on error.
-OPENSSL_EXPORT int BN_div(BIGNUM *quotient, BIGNUM *rem,
-                          const BIGNUM *numerator, const BIGNUM *divisor,
-                          BN_CTX *ctx);
-
-// BN_div_word sets |numerator| = |numerator|/|divisor| and returns the
-// remainder or (BN_ULONG)-1 on error.
-OPENSSL_EXPORT BN_ULONG BN_div_word(BIGNUM *numerator, BN_ULONG divisor);
-
-// BN_sqrt sets |*out_sqrt| (which may be the same |BIGNUM| as |in|) to the
-// square root of |in|, using |ctx|. It returns one on success or zero on
-// error. Negative numbers and non-square numbers will result in an error with
-// appropriate errors on the error queue.
-OPENSSL_EXPORT int BN_sqrt(BIGNUM *out_sqrt, const BIGNUM *in, BN_CTX *ctx);
-
-
-// Comparison functions
-
-// BN_cmp returns a value less than, equal to or greater than zero if |a| is
-// less than, equal to or greater than |b|, respectively.
-OPENSSL_EXPORT int BN_cmp(const BIGNUM *a, const BIGNUM *b);
-
-// BN_cmp_word is like |BN_cmp| except it takes its second argument as a
-// |BN_ULONG| instead of a |BIGNUM|.
-OPENSSL_EXPORT int BN_cmp_word(const BIGNUM *a, BN_ULONG b);
-
-// BN_ucmp returns a value less than, equal to or greater than zero if the
-// absolute value of |a| is less than, equal to or greater than the absolute
-// value of |b|, respectively.
-OPENSSL_EXPORT int BN_ucmp(const BIGNUM *a, const BIGNUM *b);
-
-// BN_equal_consttime returns one if |a| is equal to |b|, and zero otherwise.
-// It takes an amount of time dependent on the sizes of |a| and |b|, but
-// independent of the contents (including the signs) of |a| and |b|.
-OPENSSL_EXPORT int BN_equal_consttime(const BIGNUM *a, const BIGNUM *b);
-
-// BN_abs_is_word returns one if the absolute value of |bn| equals |w| and zero
-// otherwise.
-OPENSSL_EXPORT int BN_abs_is_word(const BIGNUM *bn, BN_ULONG w);
-
-// BN_is_zero returns one if |bn| is zero and zero otherwise.
-OPENSSL_EXPORT int BN_is_zero(const BIGNUM *bn);
-
-// BN_is_one returns one if |bn| equals one and zero otherwise.
-OPENSSL_EXPORT int BN_is_one(const BIGNUM *bn);
-
-// BN_is_word returns one if |bn| is exactly |w| and zero otherwise.
-OPENSSL_EXPORT int BN_is_word(const BIGNUM *bn, BN_ULONG w);
-
-// BN_is_odd returns one if |bn| is odd and zero otherwise.
-OPENSSL_EXPORT int BN_is_odd(const BIGNUM *bn);
-
-// BN_is_pow2 returns 1 if |a| is a power of two, and 0 otherwise.
-OPENSSL_EXPORT int BN_is_pow2(const BIGNUM *a);
-
-
-// Bitwise operations.
-
-// BN_lshift sets |r| equal to |a| << n. The |a| and |r| arguments may be the
-// same |BIGNUM|. It returns one on success and zero on allocation failure.
-OPENSSL_EXPORT int BN_lshift(BIGNUM *r, const BIGNUM *a, int n);
-
-// BN_lshift1 sets |r| equal to |a| << 1, where |r| and |a| may be the same
-// pointer. It returns one on success and zero on allocation failure.
-OPENSSL_EXPORT int BN_lshift1(BIGNUM *r, const BIGNUM *a);
-
-// BN_rshift sets |r| equal to |a| >> n, where |r| and |a| may be the same
-// pointer. It returns one on success and zero on allocation failure.
-OPENSSL_EXPORT int BN_rshift(BIGNUM *r, const BIGNUM *a, int n);
-
-// BN_rshift1 sets |r| equal to |a| >> 1, where |r| and |a| may be the same
-// pointer. It returns one on success and zero on allocation failure.
-OPENSSL_EXPORT int BN_rshift1(BIGNUM *r, const BIGNUM *a);
-
-// BN_set_bit sets the |n|th, least-significant bit in |a|. For example, if |a|
-// is 2 then setting bit zero will make it 3. It returns one on success or zero
-// on allocation failure.
-OPENSSL_EXPORT int BN_set_bit(BIGNUM *a, int n);
-
-// BN_clear_bit clears the |n|th, least-significant bit in |a|. For example, if
-// |a| is 3, clearing bit zero will make it two. It returns one on success or
-// zero on allocation failure.
-OPENSSL_EXPORT int BN_clear_bit(BIGNUM *a, int n);
-
-// BN_is_bit_set returns one if the |n|th least-significant bit in |a| exists
-// and is set. Otherwise, it returns zero.
-OPENSSL_EXPORT int BN_is_bit_set(const BIGNUM *a, int n);
-
-// BN_mask_bits truncates |a| so that it is only |n| bits long. It returns one
-// on success or zero if |n| is negative.
-//
-// This differs from OpenSSL which additionally returns zero if |a|'s word
-// length is less than or equal to |n|, rounded down to a number of words. Note
-// word size is platform-dependent, so this behavior is also difficult to rely
-// on in OpenSSL and not very useful.
-OPENSSL_EXPORT int BN_mask_bits(BIGNUM *a, int n);
-
-// BN_count_low_zero_bits returns the number of low-order zero bits in |bn|, or
-// the number of factors of two which divide it. It returns zero if |bn| is
-// zero.
-OPENSSL_EXPORT int BN_count_low_zero_bits(const BIGNUM *bn);
-
-
-// Modulo arithmetic.
-
-// BN_mod_word returns |a| mod |w| or (BN_ULONG)-1 on error.
-OPENSSL_EXPORT BN_ULONG BN_mod_word(const BIGNUM *a, BN_ULONG w);
-
-// BN_mod_pow2 sets |r| = |a| mod 2^|e|. It returns 1 on success and
-// 0 on error.
-OPENSSL_EXPORT int BN_mod_pow2(BIGNUM *r, const BIGNUM *a, size_t e);
-
-// BN_nnmod_pow2 sets |r| = |a| mod 2^|e| where |r| is always positive.
-// It returns 1 on success and 0 on error.
-OPENSSL_EXPORT int BN_nnmod_pow2(BIGNUM *r, const BIGNUM *a, size_t e);
-
-// BN_mod is a helper macro that calls |BN_div| and discards the quotient.
-#define BN_mod(rem, numerator, divisor, ctx) \
-  BN_div(NULL, (rem), (numerator), (divisor), (ctx))
-
-// BN_nnmod is a non-negative modulo function. It acts like |BN_mod|, but 0 <=
-// |rem| < |divisor| is always true. It returns one on success and zero on
-// error.
-OPENSSL_EXPORT int BN_nnmod(BIGNUM *rem, const BIGNUM *numerator,
-                            const BIGNUM *divisor, BN_CTX *ctx);
-
-// BN_mod_add sets |r| = |a| + |b| mod |m|. It returns one on success and zero
-// on error.
-OPENSSL_EXPORT int BN_mod_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-                              const BIGNUM *m, BN_CTX *ctx);
-
-// BN_mod_add_quick acts like |BN_mod_add| but requires that |a| and |b| be
-// non-negative and less than |m|.
-OPENSSL_EXPORT int BN_mod_add_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-                                    const BIGNUM *m);
-
-// BN_mod_sub sets |r| = |a| - |b| mod |m|. It returns one on success and zero
-// on error.
-OPENSSL_EXPORT int BN_mod_sub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-                              const BIGNUM *m, BN_CTX *ctx);
-
-// BN_mod_sub_quick acts like |BN_mod_sub| but requires that |a| and |b| be
-// non-negative and less than |m|.
-OPENSSL_EXPORT int BN_mod_sub_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-                                    const BIGNUM *m);
-
-// BN_mod_mul sets |r| = |a|*|b| mod |m|. It returns one on success and zero
-// on error.
-OPENSSL_EXPORT int BN_mod_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-                              const BIGNUM *m, BN_CTX *ctx);
-
-// BN_mod_sqr sets |r| = |a|^2 mod |m|. It returns one on success and zero
-// on error.
-OPENSSL_EXPORT int BN_mod_sqr(BIGNUM *r, const BIGNUM *a, const BIGNUM *m,
-                              BN_CTX *ctx);
-
-// BN_mod_lshift sets |r| = (|a| << n) mod |m|, where |r| and |a| may be the
-// same pointer. It returns one on success and zero on error.
-OPENSSL_EXPORT int BN_mod_lshift(BIGNUM *r, const BIGNUM *a, int n,
-                                 const BIGNUM *m, BN_CTX *ctx);
-
-// BN_mod_lshift_quick acts like |BN_mod_lshift| but requires that |a| be
-// non-negative and less than |m|.
-OPENSSL_EXPORT int BN_mod_lshift_quick(BIGNUM *r, const BIGNUM *a, int n,
-                                       const BIGNUM *m);
-
-// BN_mod_lshift1 sets |r| = (|a| << 1) mod |m|, where |r| and |a| may be the
-// same pointer. It returns one on success and zero on error.
-OPENSSL_EXPORT int BN_mod_lshift1(BIGNUM *r, const BIGNUM *a, const BIGNUM *m,
-                                  BN_CTX *ctx);
-
-// BN_mod_lshift1_quick acts like |BN_mod_lshift1| but requires that |a| be
-// non-negative and less than |m|.
-OPENSSL_EXPORT int BN_mod_lshift1_quick(BIGNUM *r, const BIGNUM *a,
-                                        const BIGNUM *m);
-
-// BN_mod_sqrt returns a newly-allocated |BIGNUM|, r, such that
-// r^2 == a (mod p). |p| must be a prime. It returns NULL on error or if |a| is
-// not a square mod |p|. In the latter case, it will add |BN_R_NOT_A_SQUARE| to
-// the error queue.
-OPENSSL_EXPORT BIGNUM *BN_mod_sqrt(BIGNUM *in, const BIGNUM *a, const BIGNUM *p,
-                                   BN_CTX *ctx);
-
-
-// Random and prime number generation.
-
-// The following are values for the |top| parameter of |BN_rand|.
-#define BN_RAND_TOP_ANY    (-1)
-#define BN_RAND_TOP_ONE     0
-#define BN_RAND_TOP_TWO     1
-
-// The following are values for the |bottom| parameter of |BN_rand|.
-#define BN_RAND_BOTTOM_ANY  0
-#define BN_RAND_BOTTOM_ODD  1
-
-// BN_rand sets |rnd| to a random number of length |bits|. It returns one on
-// success and zero otherwise.
-//
-// |top| must be one of the |BN_RAND_TOP_*| values. If |BN_RAND_TOP_ONE|, the
-// most-significant bit, if any, will be set. If |BN_RAND_TOP_TWO|, the two
-// most significant bits, if any, will be set. If |BN_RAND_TOP_ANY|, no extra
-// action will be taken and |BN_num_bits(rnd)| may not equal |bits| if the most
-// significant bits randomly ended up as zeros.
-//
-// |bottom| must be one of the |BN_RAND_BOTTOM_*| values. If
-// |BN_RAND_BOTTOM_ODD|, the least-significant bit, if any, will be set. If
-// |BN_RAND_BOTTOM_ANY|, no extra action will be taken.
-OPENSSL_EXPORT int BN_rand(BIGNUM *rnd, int bits, int top, int bottom);
-
-// BN_pseudo_rand is an alias for |BN_rand|.
-OPENSSL_EXPORT int BN_pseudo_rand(BIGNUM *rnd, int bits, int top, int bottom);
-
-// BN_rand_range is equivalent to |BN_rand_range_ex| with |min_inclusive| set
-// to zero and |max_exclusive| set to |range|.
-OPENSSL_EXPORT int BN_rand_range(BIGNUM *rnd, const BIGNUM *range);
-
-// BN_rand_range_ex sets |rnd| to a random value in
-// [min_inclusive..max_exclusive). It returns one on success and zero
-// otherwise.
-OPENSSL_EXPORT int BN_rand_range_ex(BIGNUM *r, BN_ULONG min_inclusive,
-                                    const BIGNUM *max_exclusive);
-
-// BN_pseudo_rand_range is an alias for BN_rand_range.
-OPENSSL_EXPORT int BN_pseudo_rand_range(BIGNUM *rnd, const BIGNUM *range);
-
-// BN_GENCB holds a callback function that is used by generation functions that
-// can take a very long time to complete. Use |BN_GENCB_set| to initialise a
-// |BN_GENCB| structure.
-//
-// The callback receives the address of that |BN_GENCB| structure as its last
-// argument and the user is free to put an arbitrary pointer in |arg|. The other
-// arguments are set as follows:
-//   event=BN_GENCB_GENERATED, n=i:   after generating the i'th possible prime
-//                                    number.
-//   event=BN_GENCB_PRIME_TEST, n=-1: when finished trial division primality
-//                                    checks.
-//   event=BN_GENCB_PRIME_TEST, n=i:  when the i'th primality test has finished.
-//
-// The callback can return zero to abort the generation progress or one to
-// allow it to continue.
-//
-// When other code needs to call a BN generation function it will often take a
-// BN_GENCB argument and may call the function with other argument values.
-#define BN_GENCB_GENERATED 0
-#define BN_GENCB_PRIME_TEST 1
-
-struct bn_gencb_st {
-  void *arg;        // callback-specific data
-  int (*callback)(int event, int n, struct bn_gencb_st *);
-};
-
-// BN_GENCB_set configures |callback| to call |f| and sets |callout->arg| to
-// |arg|.
-OPENSSL_EXPORT void BN_GENCB_set(BN_GENCB *callback,
-                                 int (*f)(int event, int n,
-                                          struct bn_gencb_st *),
-                                 void *arg);
-
-// BN_GENCB_call calls |callback|, if not NULL, and returns the return value of
-// the callback, or 1 if |callback| is NULL.
-OPENSSL_EXPORT int BN_GENCB_call(BN_GENCB *callback, int event, int n);
-
-// BN_generate_prime_ex sets |ret| to a prime number of |bits| length. If safe
-// is non-zero then the prime will be such that (ret-1)/2 is also a prime.
-// (This is needed for Diffie-Hellman groups to ensure that the only subgroups
-// are of size 2 and (p-1)/2.).
-//
-// If |add| is not NULL, the prime will fulfill the condition |ret| % |add| ==
-// |rem| in order to suit a given generator. (If |rem| is NULL then |ret| %
-// |add| == 1.)
-//
-// If |cb| is not NULL, it will be called during processing to give an
-// indication of progress. See the comments for |BN_GENCB|. It returns one on
-// success and zero otherwise.
-OPENSSL_EXPORT int BN_generate_prime_ex(BIGNUM *ret, int bits, int safe,
-                                        const BIGNUM *add, const BIGNUM *rem,
-                                        BN_GENCB *cb);
-
-// BN_prime_checks is magic value that can be used as the |checks| argument to
-// the primality testing functions in order to automatically select a number of
-// Miller-Rabin checks that gives a false positive rate of ~2^{-80}.
-#define BN_prime_checks 0
-
-// bn_primality_result_t enumerates the outcomes of primality-testing.
-enum bn_primality_result_t {
-  bn_probably_prime,
-  bn_composite,
-  bn_non_prime_power_composite,
-};
-
-// BN_enhanced_miller_rabin_primality_test tests whether |w| is probably a prime
-// number using the Enhanced Miller-Rabin Test (FIPS 186-4 C.3.2) with
-// |iterations| iterations and returns the result in |out_result|. Enhanced
-// Miller-Rabin tests primality for odd integers greater than 3, returning
-// |bn_probably_prime| if the number is probably prime,
-// |bn_non_prime_power_composite| if the number is a composite that is not the
-// power of a single prime, and |bn_composite| otherwise.  If |iterations| is
-// |BN_prime_checks|, then a value that results in a false positive rate lower
-// than the number-field sieve security level of |w| is used. It returns one on
-// success and zero on failure. If |cb| is not NULL, then it is called during
-// each iteration of the primality test.
-OPENSSL_EXPORT int BN_enhanced_miller_rabin_primality_test(
-    enum bn_primality_result_t *out_result, const BIGNUM *w, int iterations,
-    BN_CTX *ctx, BN_GENCB *cb);
-
-// BN_primality_test sets |*is_probably_prime| to one if |candidate| is
-// probably a prime number by the Miller-Rabin test or zero if it's certainly
-// not.
-//
-// If |do_trial_division| is non-zero then |candidate| will be tested against a
-// list of small primes before Miller-Rabin tests. The probability of this
-// function returning a false positive is 2^{2*checks}. If |checks| is
-// |BN_prime_checks| then a value that results in a false positive rate lower
-// than the number-field sieve security level of |candidate| is used. If |cb| is
-// not NULL then it is called during the checking process. See the comment above
-// |BN_GENCB|.
-//
-// The function returns one on success and zero on error.
-//
-// (If you are unsure whether you want |do_trial_division|, don't set it.)
-OPENSSL_EXPORT int BN_primality_test(int *is_probably_prime,
-                                     const BIGNUM *candidate, int checks,
-                                     BN_CTX *ctx, int do_trial_division,
-                                     BN_GENCB *cb);
-
-// BN_is_prime_fasttest_ex returns one if |candidate| is probably a prime
-// number by the Miller-Rabin test, zero if it's certainly not and -1 on error.
-//
-// If |do_trial_division| is non-zero then |candidate| will be tested against a
-// list of small primes before Miller-Rabin tests. The probability of this
-// function returning one when |candidate| is composite is 2^{2*checks}. If
-// |checks| is |BN_prime_checks| then a value that results in a false positive
-// rate lower than the number-field sieve security level of |candidate| is used.
-// If |cb| is not NULL then it is called during the checking process. See the
-// comment above |BN_GENCB|.
-//
-// WARNING: deprecated. Use |BN_primality_test|.
-OPENSSL_EXPORT int BN_is_prime_fasttest_ex(const BIGNUM *candidate, int checks,
-                                           BN_CTX *ctx, int do_trial_division,
-                                           BN_GENCB *cb);
-
-// BN_is_prime_ex acts the same as |BN_is_prime_fasttest_ex| with
-// |do_trial_division| set to zero.
-//
-// WARNING: deprecated: Use |BN_primality_test|.
-OPENSSL_EXPORT int BN_is_prime_ex(const BIGNUM *candidate, int checks,
-                                  BN_CTX *ctx, BN_GENCB *cb);
-
-
-// Number theory functions
-
-// BN_gcd sets |r| = gcd(|a|, |b|). It returns one on success and zero
-// otherwise.
-OPENSSL_EXPORT int BN_gcd(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-                          BN_CTX *ctx);
-
-// BN_mod_inverse sets |out| equal to |a|^-1, mod |n|. If |out| is NULL, a
-// fresh BIGNUM is allocated. It returns the result or NULL on error.
-//
-// If |n| is even then the operation is performed using an algorithm that avoids
-// some branches but which isn't constant-time. This function shouldn't be used
-// for secret values; use |BN_mod_inverse_blinded| instead. Or, if |n| is
-// guaranteed to be prime, use
-// |BN_mod_exp_mont_consttime(out, a, m_minus_2, m, ctx, m_mont)|, taking
-// advantage of Fermat's Little Theorem.
-OPENSSL_EXPORT BIGNUM *BN_mod_inverse(BIGNUM *out, const BIGNUM *a,
-                                      const BIGNUM *n, BN_CTX *ctx);
-
-// BN_mod_inverse_blinded sets |out| equal to |a|^-1, mod |n|, where |n| is the
-// Montgomery modulus for |mont|. |a| must be non-negative and must be less
-// than |n|. |n| must be greater than 1. |a| is blinded (masked by a random
-// value) to protect it against side-channel attacks. On failure, if the failure
-// was caused by |a| having no inverse mod |n| then |*out_no_inverse| will be
-// set to one; otherwise it will be set to zero.
-//
-// Note this function may incorrectly report |a| has no inverse if the random
-// blinding value has no inverse. It should only be used when |n| has few
-// non-invertible elements, such as an RSA modulus.
-int BN_mod_inverse_blinded(BIGNUM *out, int *out_no_inverse, const BIGNUM *a,
-                           const BN_MONT_CTX *mont, BN_CTX *ctx);
-
-// BN_mod_inverse_odd sets |out| equal to |a|^-1, mod |n|. |a| must be
-// non-negative and must be less than |n|. |n| must be odd. This function
-// shouldn't be used for secret values; use |BN_mod_inverse_blinded| instead.
-// Or, if |n| is guaranteed to be prime, use
-// |BN_mod_exp_mont_consttime(out, a, m_minus_2, m, ctx, m_mont)|, taking
-// advantage of Fermat's Little Theorem. It returns one on success or zero on
-// failure. On failure, if the failure was caused by |a| having no inverse mod
-// |n| then |*out_no_inverse| will be set to one; otherwise it will be set to
-// zero.
-int BN_mod_inverse_odd(BIGNUM *out, int *out_no_inverse, const BIGNUM *a,
-                       const BIGNUM *n, BN_CTX *ctx);
-
-
-// Montgomery arithmetic.
-
-// BN_MONT_CTX contains the precomputed values needed to work in a specific
-// Montgomery domain.
-
-// BN_MONT_CTX_new_for_modulus returns a fresh |BN_MONT_CTX| given the modulus,
-// |mod| or NULL on error.
-OPENSSL_EXPORT BN_MONT_CTX *BN_MONT_CTX_new_for_modulus(const BIGNUM *mod,
-                                                        BN_CTX *ctx);
-
-// BN_MONT_CTX_free frees memory associated with |mont|.
-OPENSSL_EXPORT void BN_MONT_CTX_free(BN_MONT_CTX *mont);
-
-// BN_MONT_CTX_copy sets |to| equal to |from|. It returns |to| on success or
-// NULL on error.
-OPENSSL_EXPORT BN_MONT_CTX *BN_MONT_CTX_copy(BN_MONT_CTX *to,
-                                             const BN_MONT_CTX *from);
-
-// BN_MONT_CTX_set_locked takes |lock| and checks whether |*pmont| is NULL. If
-// so, it creates a new |BN_MONT_CTX| and sets the modulus for it to |mod|. It
-// then stores it as |*pmont|. It returns one on success and zero on error.
-//
-// If |*pmont| is already non-NULL then it does nothing and returns one.
-int BN_MONT_CTX_set_locked(BN_MONT_CTX **pmont, CRYPTO_MUTEX *lock,
-                           const BIGNUM *mod, BN_CTX *bn_ctx);
-
-// BN_to_montgomery sets |ret| equal to |a| in the Montgomery domain. |a| is
-// assumed to be in the range [0, n), where |n| is the Montgomery modulus. It
-// returns one on success or zero on error.
-OPENSSL_EXPORT int BN_to_montgomery(BIGNUM *ret, const BIGNUM *a,
-                                    const BN_MONT_CTX *mont, BN_CTX *ctx);
-
-// BN_from_montgomery sets |ret| equal to |a| * R^-1, i.e. translates values out
-// of the Montgomery domain. |a| is assumed to be in the range [0, n), where |n|
-// is the Montgomery modulus. It returns one on success or zero on error.
-OPENSSL_EXPORT int BN_from_montgomery(BIGNUM *ret, const BIGNUM *a,
-                                      const BN_MONT_CTX *mont, BN_CTX *ctx);
-
-// BN_mod_mul_montgomery set |r| equal to |a| * |b|, in the Montgomery domain.
-// Both |a| and |b| must already be in the Montgomery domain (by
-// |BN_to_montgomery|). In particular, |a| and |b| are assumed to be in the
-// range [0, n), where |n| is the Montgomery modulus. It returns one on success
-// or zero on error.
-OPENSSL_EXPORT int BN_mod_mul_montgomery(BIGNUM *r, const BIGNUM *a,
-                                         const BIGNUM *b,
-                                         const BN_MONT_CTX *mont, BN_CTX *ctx);
-
-
-// Exponentiation.
-
-// BN_exp sets |r| equal to |a|^{|p|}. It does so with a square-and-multiply
-// algorithm that leaks side-channel information. It returns one on success or
-// zero otherwise.
-OPENSSL_EXPORT int BN_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-                          BN_CTX *ctx);
-
-// BN_mod_exp sets |r| equal to |a|^{|p|} mod |m|. It does so with the best
-// algorithm for the values provided. It returns one on success or zero
-// otherwise. The |BN_mod_exp_mont_consttime| variant must be used if the
-// exponent is secret.
-OPENSSL_EXPORT int BN_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-                              const BIGNUM *m, BN_CTX *ctx);
-
-OPENSSL_EXPORT int BN_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-                                   const BIGNUM *m, BN_CTX *ctx,
-                                   const BN_MONT_CTX *mont);
-
-OPENSSL_EXPORT int BN_mod_exp_mont_consttime(BIGNUM *rr, const BIGNUM *a,
-                                             const BIGNUM *p, const BIGNUM *m,
-                                             BN_CTX *ctx,
-                                             const BN_MONT_CTX *mont);
-
-
-// Deprecated functions
-
-// BN_bn2mpi serialises the value of |in| to |out|, using a format that consists
-// of the number's length in bytes represented as a 4-byte big-endian number,
-// and the number itself in big-endian format, where the most significant bit
-// signals a negative number. (The representation of numbers with the MSB set is
-// prefixed with null byte). |out| must have sufficient space available; to
-// find the needed amount of space, call the function with |out| set to NULL.
-OPENSSL_EXPORT size_t BN_bn2mpi(const BIGNUM *in, uint8_t *out);
-
-// BN_mpi2bn parses |len| bytes from |in| and returns the resulting value. The
-// bytes at |in| are expected to be in the format emitted by |BN_bn2mpi|.
-//
-// If |out| is NULL then a fresh |BIGNUM| is allocated and returned, otherwise
-// |out| is reused and returned. On error, NULL is returned and the error queue
-// is updated.
-OPENSSL_EXPORT BIGNUM *BN_mpi2bn(const uint8_t *in, size_t len, BIGNUM *out);
-
-// BN_mod_exp_mont_word is like |BN_mod_exp_mont| except that the base |a| is
-// given as a |BN_ULONG| instead of a |BIGNUM *|. It returns one on success
-// or zero otherwise.
-OPENSSL_EXPORT int BN_mod_exp_mont_word(BIGNUM *r, BN_ULONG a, const BIGNUM *p,
-                                        const BIGNUM *m, BN_CTX *ctx,
-                                        const BN_MONT_CTX *mont);
-
-// BN_mod_exp2_mont calculates (a1^p1) * (a2^p2) mod m. It returns 1 on success
-// or zero otherwise.
-OPENSSL_EXPORT int BN_mod_exp2_mont(BIGNUM *r, const BIGNUM *a1,
-                                    const BIGNUM *p1, const BIGNUM *a2,
-                                    const BIGNUM *p2, const BIGNUM *m,
-                                    BN_CTX *ctx, const BN_MONT_CTX *mont);
-
-// BN_MONT_CTX_new returns a fresh |BN_MONT_CTX| or NULL on allocation failure.
-// Use |BN_MONT_CTX_new_for_modulus| instead.
-OPENSSL_EXPORT BN_MONT_CTX *BN_MONT_CTX_new(void);
-
-// BN_MONT_CTX_set sets up a Montgomery context given the modulus, |mod|. It
-// returns one on success and zero on error. Use |BN_MONT_CTX_new_for_modulus|
-// instead.
-OPENSSL_EXPORT int BN_MONT_CTX_set(BN_MONT_CTX *mont, const BIGNUM *mod,
-                                   BN_CTX *ctx);
-
-
-// Private functions
-
-struct bignum_st {
-  // d is a pointer to an array of |width| |BN_BITS2|-bit chunks in
-  // little-endian order. This stores the absolute value of the number.
-  BN_ULONG *d;
-  // width is the number of elements of |d| which are valid. This value is not
-  // necessarily minimal; the most-significant words of |d| may be zero.
-  // |width| determines a potentially loose upper-bound on the absolute value
-  // of the |BIGNUM|.
-  //
-  // Functions taking |BIGNUM| inputs must compute the same answer for all
-  // possible widths. |bn_minimal_width|, |bn_set_minimal_width|, and other
-  // helpers may be used to recover the minimal width, provided it is not
-  // secret. If it is secret, use a different algorithm. Functions may output
-  // minimal or non-minimal |BIGNUM|s depending on secrecy requirements, but
-  // those which cause widths to unboundedly grow beyond the minimal value
-  // should be documented such.
-  //
-  // Note this is different from historical |BIGNUM| semantics.
-  int width;
-  // dmax is number of elements of |d| which are allocated.
-  int dmax;
-  // neg is one if the number if negative and zero otherwise.
-  int neg;
-  // flags is a bitmask of |BN_FLG_*| values
-  int flags;
-};
-
-struct bn_mont_ctx_st {
-  // RR is R^2, reduced modulo |N|. It is used to convert to Montgomery form.
-  BIGNUM RR;
-  // N is the modulus. It is always stored in minimal form, so |N.top|
-  // determines R.
-  BIGNUM N;
-  BN_ULONG n0[2];  // least significant words of (R*Ri-1)/N
-};
-
-OPENSSL_EXPORT unsigned BN_num_bits_word(BN_ULONG l);
-
-#define BN_FLG_MALLOCED 0x01
-#define BN_FLG_STATIC_DATA 0x02
-// |BN_FLG_CONSTTIME| has been removed and intentionally omitted so code relying
-// on it will not compile. Consumers outside BoringSSL should use the
-// higher-level cryptographic algorithms exposed by other modules. Consumers
-// within the library should call the appropriate timing-sensitive algorithm
-// directly.
-
-
-#if defined(__cplusplus)
-}  // extern C
-
-#if !defined(BORINGSSL_NO_CXX)
-extern "C++" {
-
-namespace bssl {
-
-BORINGSSL_MAKE_DELETER(BIGNUM, BN_free)
-BORINGSSL_MAKE_DELETER(BN_CTX, BN_CTX_free)
-BORINGSSL_MAKE_DELETER(BN_MONT_CTX, BN_MONT_CTX_free)
-
-class BN_CTXScope {
- public:
-  BN_CTXScope(BN_CTX *ctx) : ctx_(ctx) { BN_CTX_start(ctx_); }
-  ~BN_CTXScope() { BN_CTX_end(ctx_); }
-
- private:
-  BN_CTX *ctx_;
-
-  BN_CTXScope(BN_CTXScope &) = delete;
-  BN_CTXScope &operator=(BN_CTXScope &) = delete;
-};
-
-}  // namespace bssl
-
-}  // extern C++
-#endif
-
-#endif
-
-#define BN_R_ARG2_LT_ARG3 100
-#define BN_R_BAD_RECIPROCAL 101
-#define BN_R_BIGNUM_TOO_LONG 102
-#define BN_R_BITS_TOO_SMALL 103
-#define BN_R_CALLED_WITH_EVEN_MODULUS 104
-#define BN_R_DIV_BY_ZERO 105
-#define BN_R_EXPAND_ON_STATIC_BIGNUM_DATA 106
-#define BN_R_INPUT_NOT_REDUCED 107
-#define BN_R_INVALID_RANGE 108
-#define BN_R_NEGATIVE_NUMBER 109
-#define BN_R_NOT_A_SQUARE 110
-#define BN_R_NOT_INITIALIZED 111
-#define BN_R_NO_INVERSE 112
-#define BN_R_PRIVATE_KEY_TOO_LARGE 113
-#define BN_R_P_IS_NOT_PRIME 114
-#define BN_R_TOO_MANY_ITERATIONS 115
-#define BN_R_TOO_MANY_TEMPORARY_VARIABLES 116
-#define BN_R_BAD_ENCODING 117
-#define BN_R_ENCODE_ERROR 118
-#define BN_R_INVALID_INPUT 119
-
-#endif  // OPENSSL_HEADER_BN_H