grpc 1.21.0 → 1.32.0

data/third_party/boringssl-with-bazel/src/include/openssl/base64.h

@@ -0,0 +1,190 @@
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.] */
+
+#ifndef OPENSSL_HEADER_BASE64_H
+#define OPENSSL_HEADER_BASE64_H
+
+#include <openssl/base.h>
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+
+// base64 functions.
+//
+// For historical reasons, these functions have the EVP_ prefix but just do
+// base64 encoding and decoding. Note that BoringSSL is a cryptography library,
+// so these functions are implemented with side channel protections, at a
+// performance cost. For other base64 uses, use a general-purpose base64
+// implementation.
+
+
+// Encoding
+
+// EVP_EncodeBlock encodes |src_len| bytes from |src| and writes the
+// result to |dst| with a trailing NUL. It returns the number of bytes
+// written, not including this trailing NUL.
+OPENSSL_EXPORT size_t EVP_EncodeBlock(uint8_t *dst, const uint8_t *src,
+                                      size_t src_len);
+
+// EVP_EncodedLength sets |*out_len| to the number of bytes that will be needed
+// to call |EVP_EncodeBlock| on an input of length |len|. This includes the
+// final NUL that |EVP_EncodeBlock| writes. It returns one on success or zero
+// on error.
+OPENSSL_EXPORT int EVP_EncodedLength(size_t *out_len, size_t len);
+
+
+// Decoding
+
+// EVP_DecodedLength sets |*out_len| to the maximum number of bytes that will
+// be needed to call |EVP_DecodeBase64| on an input of length |len|. It returns
+// one on success or zero if |len| is not a valid length for a base64-encoded
+// string.
+OPENSSL_EXPORT int EVP_DecodedLength(size_t *out_len, size_t len);
+
+// EVP_DecodeBase64 decodes |in_len| bytes from base64 and writes
+// |*out_len| bytes to |out|. |max_out| is the size of the output
+// buffer. If it is not enough for the maximum output size, the
+// operation fails. It returns one on success or zero on error.
+OPENSSL_EXPORT int EVP_DecodeBase64(uint8_t *out, size_t *out_len,
+                                    size_t max_out, const uint8_t *in,
+                                    size_t in_len);
+
+
+// Deprecated functions.
+//
+// OpenSSL provides a streaming base64 implementation, however its behavior is
+// very specific to PEM. It is also very lenient of invalid input. Use of any of
+// these functions is thus deprecated.
+
+// EVP_EncodeInit initialises |*ctx|, which is typically stack
+// allocated, for an encoding operation.
+//
+// NOTE: The encoding operation breaks its output with newlines every
+// 64 characters of output (48 characters of input). Use
+// EVP_EncodeBlock to encode raw base64.
+OPENSSL_EXPORT void EVP_EncodeInit(EVP_ENCODE_CTX *ctx);
+
+// EVP_EncodeUpdate encodes |in_len| bytes from |in| and writes an encoded
+// version of them to |out| and sets |*out_len| to the number of bytes written.
+// Some state may be contained in |ctx| so |EVP_EncodeFinal| must be used to
+// flush it before using the encoded data.
+OPENSSL_EXPORT void EVP_EncodeUpdate(EVP_ENCODE_CTX *ctx, uint8_t *out,
+                                     int *out_len, const uint8_t *in,
+                                     size_t in_len);
+
+// EVP_EncodeFinal flushes any remaining output bytes from |ctx| to |out| and
+// sets |*out_len| to the number of bytes written.
+OPENSSL_EXPORT void EVP_EncodeFinal(EVP_ENCODE_CTX *ctx, uint8_t *out,
+                                    int *out_len);
+
+// EVP_DecodeInit initialises |*ctx|, which is typically stack allocated, for
+// a decoding operation.
+//
+// TODO(davidben): This isn't a straight-up base64 decode either. Document
+// and/or fix exactly what's going on here; maximum line length and such.
+OPENSSL_EXPORT void EVP_DecodeInit(EVP_ENCODE_CTX *ctx);
+
+// EVP_DecodeUpdate decodes |in_len| bytes from |in| and writes the decoded
+// data to |out| and sets |*out_len| to the number of bytes written. Some state
+// may be contained in |ctx| so |EVP_DecodeFinal| must be used to flush it
+// before using the encoded data.
+//
+// It returns -1 on error, one if a full line of input was processed and zero
+// if the line was short (i.e. it was the last line).
+OPENSSL_EXPORT int EVP_DecodeUpdate(EVP_ENCODE_CTX *ctx, uint8_t *out,
+                                    int *out_len, const uint8_t *in,
+                                    size_t in_len);
+
+// EVP_DecodeFinal flushes any remaining output bytes from |ctx| to |out| and
+// sets |*out_len| to the number of bytes written. It returns one on success
+// and minus one on error.
+OPENSSL_EXPORT int EVP_DecodeFinal(EVP_ENCODE_CTX *ctx, uint8_t *out,
+                                   int *out_len);
+
+// EVP_DecodeBlock encodes |src_len| bytes from |src| and writes the result to
+// |dst|. It returns the number of bytes written or -1 on error.
+//
+// WARNING: EVP_DecodeBlock's return value does not take padding into
+// account. It also strips leading whitespace and trailing
+// whitespace and minuses.
+OPENSSL_EXPORT int EVP_DecodeBlock(uint8_t *dst, const uint8_t *src,
+                                   size_t src_len);
+
+
+struct evp_encode_ctx_st {
+  // data_used indicates the number of bytes of |data| that are valid. When
+  // encoding, |data| will be filled and encoded as a lump. When decoding, only
+  // the first four bytes of |data| will be used.
+  unsigned data_used;
+  uint8_t data[48];
+
+  // eof_seen indicates that the end of the base64 data has been seen when
+  // decoding. Only whitespace can follow.
+  char eof_seen;
+
+  // error_encountered indicates that invalid base64 data was found. This will
+  // cause all future calls to fail.
+  char error_encountered;
+};
+
+
+#if defined(__cplusplus)
+}  // extern C
+#endif
+
+#endif  // OPENSSL_HEADER_BASE64_H

data/third_party/boringssl-with-bazel/src/include/openssl/bio.h

@@ -0,0 +1,933 @@
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.] */
+
+#ifndef OPENSSL_HEADER_BIO_H
+#define OPENSSL_HEADER_BIO_H
+
+#include <openssl/base.h>
+
+#include <stdio.h>  // For FILE
+
+#include <openssl/buffer.h>
+#include <openssl/err.h>  // for ERR_print_errors_fp
+#include <openssl/ex_data.h>
+#include <openssl/stack.h>
+#include <openssl/thread.h>
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+
+// BIO abstracts over a file-descriptor like interface.
+
+
+// Allocation and freeing.
+
+DEFINE_STACK_OF(BIO)
+
+// BIO_new creates a new BIO with the given method and a reference count of one.
+// It returns the fresh |BIO|, or NULL on error.
+OPENSSL_EXPORT BIO *BIO_new(const BIO_METHOD *method);
+
+// BIO_free decrements the reference count of |bio|. If the reference count
+// drops to zero, it calls the destroy callback, if present, on the method and
+// frees |bio| itself. It then repeats that for the next BIO in the chain, if
+// any.
+//
+// It returns one on success or zero otherwise.
+OPENSSL_EXPORT int BIO_free(BIO *bio);
+
+// BIO_vfree performs the same actions as |BIO_free|, but has a void return
+// value. This is provided for API-compat.
+//
+// TODO(fork): remove.
+OPENSSL_EXPORT void BIO_vfree(BIO *bio);
+
+// BIO_up_ref increments the reference count of |bio| and returns one.
+OPENSSL_EXPORT int BIO_up_ref(BIO *bio);
+
+
+// Basic I/O.
+
+// BIO_read attempts to read |len| bytes into |data|. It returns the number of
+// bytes read, zero on EOF, or a negative number on error.
+OPENSSL_EXPORT int BIO_read(BIO *bio, void *data, int len);
+
+// BIO_gets "reads a line" from |bio| and puts at most |size| bytes into |buf|.
+// It returns the number of bytes read or a negative number on error. The
+// phrase "reads a line" is in quotes in the previous sentence because the
+// exact operation depends on the BIO's method. For example, a digest BIO will
+// return the digest in response to a |BIO_gets| call.
+//
+// TODO(fork): audit the set of BIOs that we end up needing. If all actually
+// return a line for this call, remove the warning above.
+OPENSSL_EXPORT int BIO_gets(BIO *bio, char *buf, int size);
+
+// BIO_write writes |len| bytes from |data| to |bio|. It returns the number of
+// bytes written or a negative number on error.
+OPENSSL_EXPORT int BIO_write(BIO *bio, const void *data, int len);
+
+// BIO_write_all writes |len| bytes from |data| to |bio|, looping as necessary.
+// It returns one if all bytes were successfully written and zero on error.
+OPENSSL_EXPORT int BIO_write_all(BIO *bio, const void *data, size_t len);
+
+// BIO_puts writes a NUL terminated string from |buf| to |bio|. It returns the
+// number of bytes written or a negative number on error.
+OPENSSL_EXPORT int BIO_puts(BIO *bio, const char *buf);
+
+// BIO_flush flushes any buffered output. It returns one on success and zero
+// otherwise.
+OPENSSL_EXPORT int BIO_flush(BIO *bio);
+
+
+// Low-level control functions.
+//
+// These are generic functions for sending control requests to a BIO. In
+// general one should use the wrapper functions like |BIO_get_close|.
+
+// BIO_ctrl sends the control request |cmd| to |bio|. The |cmd| argument should
+// be one of the |BIO_C_*| values.
+OPENSSL_EXPORT long BIO_ctrl(BIO *bio, int cmd, long larg, void *parg);
+
+// BIO_ptr_ctrl acts like |BIO_ctrl| but passes the address of a |void*|
+// pointer as |parg| and returns the value that is written to it, or NULL if
+// the control request returns <= 0.
+OPENSSL_EXPORT char *BIO_ptr_ctrl(BIO *bp, int cmd, long larg);
+
+// BIO_int_ctrl acts like |BIO_ctrl| but passes the address of a copy of |iarg|
+// as |parg|.
+OPENSSL_EXPORT long BIO_int_ctrl(BIO *bp, int cmd, long larg, int iarg);
+
+// BIO_reset resets |bio| to its initial state, the precise meaning of which
+// depends on the concrete type of |bio|. It returns one on success and zero
+// otherwise.
+OPENSSL_EXPORT int BIO_reset(BIO *bio);
+
+// BIO_eof returns non-zero when |bio| has reached end-of-file. The precise
+// meaning of which depends on the concrete type of |bio|. Note that in the
+// case of BIO_pair this always returns non-zero.
+OPENSSL_EXPORT int BIO_eof(BIO *bio);
+
+// BIO_set_flags ORs |flags| with |bio->flags|.
+OPENSSL_EXPORT void BIO_set_flags(BIO *bio, int flags);
+
+// BIO_test_flags returns |bio->flags| AND |flags|.
+OPENSSL_EXPORT int BIO_test_flags(const BIO *bio, int flags);
+
+// BIO_should_read returns non-zero if |bio| encountered a temporary error
+// while reading (i.e. EAGAIN), indicating that the caller should retry the
+// read.
+OPENSSL_EXPORT int BIO_should_read(const BIO *bio);
+
+// BIO_should_write returns non-zero if |bio| encountered a temporary error
+// while writing (i.e. EAGAIN), indicating that the caller should retry the
+// write.
+OPENSSL_EXPORT int BIO_should_write(const BIO *bio);
+
+// BIO_should_retry returns non-zero if the reason that caused a failed I/O
+// operation is temporary and thus the operation should be retried. Otherwise,
+// it was a permanent error and it returns zero.
+OPENSSL_EXPORT int BIO_should_retry(const BIO *bio);
+
+// BIO_should_io_special returns non-zero if |bio| encountered a temporary
+// error while performing a special I/O operation, indicating that the caller
+// should retry. The operation that caused the error is returned by
+// |BIO_get_retry_reason|.
+OPENSSL_EXPORT int BIO_should_io_special(const BIO *bio);
+
+// BIO_RR_CONNECT indicates that a connect would have blocked
+#define BIO_RR_CONNECT 0x02
+
+// BIO_RR_ACCEPT indicates that an accept would have blocked
+#define BIO_RR_ACCEPT 0x03
+
+// BIO_get_retry_reason returns the special I/O operation that needs to be
+// retried. The return value is one of the |BIO_RR_*| values.
+OPENSSL_EXPORT int BIO_get_retry_reason(const BIO *bio);
+
+// BIO_clear_flags ANDs |bio->flags| with the bitwise-complement of |flags|.
+OPENSSL_EXPORT void BIO_clear_flags(BIO *bio, int flags);
+
+// BIO_set_retry_read sets the |BIO_FLAGS_READ| and |BIO_FLAGS_SHOULD_RETRY|
+// flags on |bio|.
+OPENSSL_EXPORT void BIO_set_retry_read(BIO *bio);
+
+// BIO_set_retry_write sets the |BIO_FLAGS_WRITE| and |BIO_FLAGS_SHOULD_RETRY|
+// flags on |bio|.
+OPENSSL_EXPORT void BIO_set_retry_write(BIO *bio);
+
+// BIO_get_retry_flags gets the |BIO_FLAGS_READ|, |BIO_FLAGS_WRITE|,
+// |BIO_FLAGS_IO_SPECIAL| and |BIO_FLAGS_SHOULD_RETRY| flags from |bio|.
+OPENSSL_EXPORT int BIO_get_retry_flags(BIO *bio);
+
+// BIO_clear_retry_flags clears the |BIO_FLAGS_READ|, |BIO_FLAGS_WRITE|,
+// |BIO_FLAGS_IO_SPECIAL| and |BIO_FLAGS_SHOULD_RETRY| flags from |bio|.
+OPENSSL_EXPORT void BIO_clear_retry_flags(BIO *bio);
+
+// BIO_method_type returns the type of |bio|, which is one of the |BIO_TYPE_*|
+// values.
+OPENSSL_EXPORT int BIO_method_type(const BIO *bio);
+
+// These are passed to the BIO callback
+#define BIO_CB_FREE 0x01
+#define BIO_CB_READ 0x02
+#define BIO_CB_WRITE 0x03
+#define BIO_CB_PUTS 0x04
+#define BIO_CB_GETS 0x05
+#define BIO_CB_CTRL 0x06
+
+// The callback is called before and after the underling operation,
+// The BIO_CB_RETURN flag indicates if it is after the call
+#define BIO_CB_RETURN 0x80
+
+// bio_info_cb is the type of a callback function that can be called for most
+// BIO operations. The |event| argument is one of |BIO_CB_*| and can be ORed
+// with |BIO_CB_RETURN| if the callback is being made after the operation in
+// question. In that case, |return_value| will contain the return value from
+// the operation.
+typedef long (*bio_info_cb)(BIO *bio, int event, const char *parg, int cmd,
+                            long larg, long return_value);
+
+// BIO_callback_ctrl allows the callback function to be manipulated. The |cmd|
+// arg will generally be |BIO_CTRL_SET_CALLBACK| but arbitrary command values
+// can be interpreted by the |BIO|.
+OPENSSL_EXPORT long BIO_callback_ctrl(BIO *bio, int cmd, bio_info_cb fp);
+
+// BIO_pending returns the number of bytes pending to be read.
+OPENSSL_EXPORT size_t BIO_pending(const BIO *bio);
+
+// BIO_ctrl_pending calls |BIO_pending| and exists only for compatibility with
+// OpenSSL.
+OPENSSL_EXPORT size_t BIO_ctrl_pending(const BIO *bio);
+
+// BIO_wpending returns the number of bytes pending to be written.
+OPENSSL_EXPORT size_t BIO_wpending(const BIO *bio);
+
+// BIO_set_close sets the close flag for |bio|. The meaning of which depends on
+// the type of |bio| but, for example, a memory BIO interprets the close flag
+// as meaning that it owns its buffer. It returns one on success and zero
+// otherwise.
+OPENSSL_EXPORT int BIO_set_close(BIO *bio, int close_flag);
+
+// BIO_number_read returns the number of bytes that have been read from
+// |bio|.
+OPENSSL_EXPORT size_t BIO_number_read(const BIO *bio);
+
+// BIO_number_written returns the number of bytes that have been written to
+// |bio|.
+OPENSSL_EXPORT size_t BIO_number_written(const BIO *bio);
+
+
+// Managing chains of BIOs.
+//
+// BIOs can be put into chains where the output of one is used as the input of
+// the next etc. The most common case is a buffering BIO, which accepts and
+// buffers writes until flushed into the next BIO in the chain.
+
+// BIO_push adds |appended_bio| to the end of the chain with |bio| at the head.
+// It returns |bio|. Note that |appended_bio| may be the head of a chain itself
+// and thus this function can be used to join two chains.
+//
+// BIO_push takes ownership of the caller's reference to |appended_bio|.
+OPENSSL_EXPORT BIO *BIO_push(BIO *bio, BIO *appended_bio);
+
+// BIO_pop removes |bio| from the head of a chain and returns the next BIO in
+// the chain, or NULL if there is no next BIO.
+//
+// The caller takes ownership of the chain's reference to |bio|.
+OPENSSL_EXPORT BIO *BIO_pop(BIO *bio);
+
+// BIO_next returns the next BIO in the chain after |bio|, or NULL if there is
+// no such BIO.
+OPENSSL_EXPORT BIO *BIO_next(BIO *bio);
+
+// BIO_free_all calls |BIO_free|.
+//
+// TODO(fork): update callers and remove.
+OPENSSL_EXPORT void BIO_free_all(BIO *bio);
+
+// BIO_find_type walks a chain of BIOs and returns the first that matches
+// |type|, which is one of the |BIO_TYPE_*| values.
+OPENSSL_EXPORT BIO *BIO_find_type(BIO *bio, int type);
+
+// BIO_copy_next_retry sets the retry flags and |retry_reason| of |bio| from
+// the next BIO in the chain.
+OPENSSL_EXPORT void BIO_copy_next_retry(BIO *bio);
+
+
+// Printf functions.
+
+// BIO_printf behaves like |printf| but outputs to |bio| rather than a |FILE|.
+// It returns the number of bytes written or a negative number on error.
+OPENSSL_EXPORT int BIO_printf(BIO *bio, const char *format, ...)
+    OPENSSL_PRINTF_FORMAT_FUNC(2, 3);
+
+
+// Utility functions.
+
+// BIO_indent prints min(|indent|, |max_indent|) spaces. It returns one on
+// success and zero otherwise.
+OPENSSL_EXPORT int BIO_indent(BIO *bio, unsigned indent, unsigned max_indent);
+
+// BIO_hexdump writes a hex dump of |data| to |bio|. Each line will be indented
+// by |indent| spaces.
+OPENSSL_EXPORT int BIO_hexdump(BIO *bio, const uint8_t *data, size_t len,
+                               unsigned indent);
+
+// ERR_print_errors prints the current contents of the error stack to |bio|
+// using human readable strings where possible.
+OPENSSL_EXPORT void ERR_print_errors(BIO *bio);
+
+// BIO_read_asn1 reads a single ASN.1 object from |bio|. If successful it sets
+// |*out| to be an allocated buffer (that should be freed with |OPENSSL_free|),
+// |*out_size| to the length, in bytes, of that buffer and returns one.
+// Otherwise it returns zero.
+//
+// If the length of the object is greater than |max_len| or 2^32 then the
+// function will fail. Long-form tags are not supported. If the length of the
+// object is indefinite the full contents of |bio| are read, unless it would be
+// greater than |max_len|, in which case the function fails.
+//
+// If the function fails then some unknown amount of data may have been read
+// from |bio|.
+OPENSSL_EXPORT int BIO_read_asn1(BIO *bio, uint8_t **out, size_t *out_len,
+                                 size_t max_len);
+
+
+// Memory BIOs.
+//
+// Memory BIOs can be used as a read-only source (with |BIO_new_mem_buf|) or a
+// writable sink (with |BIO_new|, |BIO_s_mem| and |BIO_mem_contents|). Data
+// written to a writable, memory BIO can be recalled by reading from it.
+//
+// Calling |BIO_reset| on a read-only BIO resets it to the original contents.
+// On a writable BIO, it clears any data.
+//
+// If the close flag is set to |BIO_NOCLOSE| (not the default) then the
+// underlying |BUF_MEM| will not be freed when the |BIO| is freed.
+//
+// Memory BIOs support |BIO_gets| and |BIO_puts|.
+//
+// |BIO_ctrl_pending| returns the number of bytes currently stored.
+
+// BIO_NOCLOSE and |BIO_CLOSE| can be used as symbolic arguments when a "close
+// flag" is passed to a BIO function.
+#define BIO_NOCLOSE 0
+#define BIO_CLOSE 1
+
+// BIO_s_mem returns a |BIO_METHOD| that uses a in-memory buffer.
+OPENSSL_EXPORT const BIO_METHOD *BIO_s_mem(void);
+
+// BIO_new_mem_buf creates read-only BIO that reads from |len| bytes at |buf|.
+// It does not take ownership of |buf|. It returns the BIO or NULL on error.
+//
+// If |len| is negative, then |buf| is treated as a NUL-terminated string, but
+// don't depend on this in new code.
+OPENSSL_EXPORT BIO *BIO_new_mem_buf(const void *buf, int len);
+
+// BIO_mem_contents sets |*out_contents| to point to the current contents of
+// |bio| and |*out_len| to contain the length of that data. It returns one on
+// success and zero otherwise.
+OPENSSL_EXPORT int BIO_mem_contents(const BIO *bio,
+                                    const uint8_t **out_contents,
+                                    size_t *out_len);
+
+// BIO_get_mem_data sets |*contents| to point to the current contents of |bio|
+// and returns the length of the data.
+//
+// WARNING: don't use this, use |BIO_mem_contents|. A return value of zero from
+// this function can mean either that it failed or that the memory buffer is
+// empty.
+OPENSSL_EXPORT long BIO_get_mem_data(BIO *bio, char **contents);
+
+// BIO_get_mem_ptr sets |*out| to a BUF_MEM containing the current contents of
+// |bio|. It returns one on success or zero on error.
+OPENSSL_EXPORT int BIO_get_mem_ptr(BIO *bio, BUF_MEM **out);
+
+// BIO_set_mem_buf sets |b| as the contents of |bio|. If |take_ownership| is
+// non-zero, then |b| will be freed when |bio| is closed. Returns one on
+// success or zero otherwise.
+OPENSSL_EXPORT int BIO_set_mem_buf(BIO *bio, BUF_MEM *b, int take_ownership);
+
+// BIO_set_mem_eof_return sets the value that will be returned from reading
+// |bio| when empty. If |eof_value| is zero then an empty memory BIO will
+// return EOF (that is it will return zero and |BIO_should_retry| will be
+// false). If |eof_value| is non zero then it will return |eof_value| when it
+// is empty and it will set the read retry flag (that is |BIO_read_retry| is
+// true). To avoid ambiguity with a normal positive return value, |eof_value|
+// should be set to a negative value, typically -1.
+//
+// For a read-only BIO, the default is zero (EOF). For a writable BIO, the
+// default is -1 so that additional data can be written once exhausted.
+OPENSSL_EXPORT int BIO_set_mem_eof_return(BIO *bio, int eof_value);
+
+
+// File descriptor BIOs.
+//
+// File descriptor BIOs are wrappers around the system's |read| and |write|
+// functions. If the close flag is set then then |close| is called on the
+// underlying file descriptor when the BIO is freed.
+//
+// |BIO_reset| attempts to seek the file pointer to the start of file using
+// |lseek|.
+
+// BIO_s_fd returns a |BIO_METHOD| for file descriptor fds.
+OPENSSL_EXPORT const BIO_METHOD *BIO_s_fd(void);
+
+// BIO_new_fd creates a new file descriptor BIO wrapping |fd|. If |close_flag|
+// is non-zero, then |fd| will be closed when the BIO is.
+OPENSSL_EXPORT BIO *BIO_new_fd(int fd, int close_flag);
+
+// BIO_set_fd sets the file descriptor of |bio| to |fd|. If |close_flag| is
+// non-zero then |fd| will be closed when |bio| is. It returns one on success
+// or zero on error.
+//
+// This function may also be used with socket BIOs (see |BIO_s_socket| and
+// |BIO_new_socket|).
+OPENSSL_EXPORT int BIO_set_fd(BIO *bio, int fd, int close_flag);
+
+// BIO_get_fd returns the file descriptor currently in use by |bio| or -1 if
+// |bio| does not wrap a file descriptor. If there is a file descriptor and
+// |out_fd| is not NULL, it also sets |*out_fd| to the file descriptor.
+//
+// This function may also be used with socket BIOs (see |BIO_s_socket| and
+// |BIO_new_socket|).
+OPENSSL_EXPORT int BIO_get_fd(BIO *bio, int *out_fd);
+
+
+// File BIOs.
+//
+// File BIOs are wrappers around a C |FILE| object.
+//
+// |BIO_flush| on a file BIO calls |fflush| on the wrapped stream.
+//
+// |BIO_reset| attempts to seek the file pointer to the start of file using
+// |fseek|.
+//
+// Setting the close flag causes |fclose| to be called on the stream when the
+// BIO is freed.
+
+// BIO_s_file returns a BIO_METHOD that wraps a |FILE|.
+OPENSSL_EXPORT const BIO_METHOD *BIO_s_file(void);
+
+// BIO_new_file creates a file BIO by opening |filename| with the given mode.
+// See the |fopen| manual page for details of the mode argument.
+OPENSSL_EXPORT BIO *BIO_new_file(const char *filename, const char *mode);
+
+// BIO_new_fp creates a new file BIO that wraps the given |FILE|. If
+// |close_flag| is |BIO_CLOSE|, then |fclose| will be called on |stream| when
+// the BIO is closed.
+OPENSSL_EXPORT BIO *BIO_new_fp(FILE *stream, int close_flag);
+
+// BIO_get_fp sets |*out_file| to the current |FILE| for |bio|. It returns one
+// on success and zero otherwise.
+OPENSSL_EXPORT int BIO_get_fp(BIO *bio, FILE **out_file);
+
+// BIO_set_fp sets the |FILE| for |bio|. If |close_flag| is |BIO_CLOSE| then
+// |fclose| will be called on |file| when |bio| is closed. It returns one on
+// success and zero otherwise.
+OPENSSL_EXPORT int BIO_set_fp(BIO *bio, FILE *file, int close_flag);
+
+// BIO_read_filename opens |filename| for reading and sets the result as the
+// |FILE| for |bio|. It returns one on success and zero otherwise. The |FILE|
+// will be closed when |bio| is freed.
+OPENSSL_EXPORT int BIO_read_filename(BIO *bio, const char *filename);
+
+// BIO_write_filename opens |filename| for writing and sets the result as the
+// |FILE| for |bio|. It returns one on success and zero otherwise. The |FILE|
+// will be closed when |bio| is freed.
+OPENSSL_EXPORT int BIO_write_filename(BIO *bio, const char *filename);
+
+// BIO_append_filename opens |filename| for appending and sets the result as
+// the |FILE| for |bio|. It returns one on success and zero otherwise. The
+// |FILE| will be closed when |bio| is freed.
+OPENSSL_EXPORT int BIO_append_filename(BIO *bio, const char *filename);
+
+// BIO_rw_filename opens |filename| for reading and writing and sets the result
+// as the |FILE| for |bio|. It returns one on success and zero otherwise. The
+// |FILE| will be closed when |bio| is freed.
+OPENSSL_EXPORT int BIO_rw_filename(BIO *bio, const char *filename);
+
+
+// Socket BIOs.
+//
+// Socket BIOs behave like file descriptor BIOs but, on Windows systems, wrap
+// the system's |recv| and |send| functions instead of |read| and |write|. On
+// Windows, file descriptors are provided by C runtime and are not
+// interchangeable with sockets.
+//
+// Socket BIOs may be used with |BIO_set_fd| and |BIO_get_fd|.
+//
+// TODO(davidben): Add separate APIs and fix the internals to use |SOCKET|s
+// around rather than rely on int casts.
+
+OPENSSL_EXPORT const BIO_METHOD *BIO_s_socket(void);
+
+// BIO_new_socket allocates and initialises a fresh BIO which will read and
+// write to the socket |fd|. If |close_flag| is |BIO_CLOSE| then closing the
+// BIO will close |fd|. It returns the fresh |BIO| or NULL on error.
+OPENSSL_EXPORT BIO *BIO_new_socket(int fd, int close_flag);
+
+
+// Connect BIOs.
+//
+// A connection BIO creates a network connection and transfers data over the
+// resulting socket.
+
+OPENSSL_EXPORT const BIO_METHOD *BIO_s_connect(void);
+
+// BIO_new_connect returns a BIO that connects to the given hostname and port.
+// The |host_and_optional_port| argument should be of the form
+// "www.example.com" or "www.example.com:443". If the port is omitted, it must
+// be provided with |BIO_set_conn_port|.
+//
+// It returns the new BIO on success, or NULL on error.
+OPENSSL_EXPORT BIO *BIO_new_connect(const char *host_and_optional_port);
+
+// BIO_set_conn_hostname sets |host_and_optional_port| as the hostname and
+// optional port that |bio| will connect to. If the port is omitted, it must be
+// provided with |BIO_set_conn_port|.
+//
+// It returns one on success and zero otherwise.
+OPENSSL_EXPORT int BIO_set_conn_hostname(BIO *bio,
+                                         const char *host_and_optional_port);
+
+// BIO_set_conn_port sets |port_str| as the port or service name that |bio|
+// will connect to. It returns one on success and zero otherwise.
+OPENSSL_EXPORT int BIO_set_conn_port(BIO *bio, const char *port_str);
+
+// BIO_set_conn_int_port sets |*port| as the port that |bio| will connect to.
+// It returns one on success and zero otherwise.
+OPENSSL_EXPORT int BIO_set_conn_int_port(BIO *bio, const int *port);
+
+// BIO_set_nbio sets whether |bio| will use non-blocking I/O operations. It
+// returns one on success and zero otherwise.
+OPENSSL_EXPORT int BIO_set_nbio(BIO *bio, int on);
+
+// BIO_do_connect connects |bio| if it has not been connected yet. It returns
+// one on success and <= 0 otherwise.
+OPENSSL_EXPORT int BIO_do_connect(BIO *bio);
+
+
+// Datagram BIOs.
+//
+// TODO(fork): not implemented.
+
+#define BIO_CTRL_DGRAM_QUERY_MTU 40  // as kernel for current MTU
+
+#define BIO_CTRL_DGRAM_SET_MTU 42 /* set cached value for  MTU. want to use
+                                     this if asking the kernel fails */
+
+#define BIO_CTRL_DGRAM_MTU_EXCEEDED 43 /* check whether the MTU was exceed in
+                                          the previous write operation. */
+
+// BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT is unsupported as it is unused by consumers
+// and depends on |timeval|, which is not 2038-clean on all platforms.
+
+#define BIO_CTRL_DGRAM_GET_PEER           46
+
+#define BIO_CTRL_DGRAM_GET_FALLBACK_MTU   47
+
+
+// BIO Pairs.
+//
+// BIO pairs provide a "loopback" like system: a pair of BIOs where data
+// written to one can be read from the other and vice versa.
+
+// BIO_new_bio_pair sets |*out1| and |*out2| to two freshly created BIOs where
+// data written to one can be read from the other and vice versa. The
+// |writebuf1| argument gives the size of the buffer used in |*out1| and
+// |writebuf2| for |*out2|. It returns one on success and zero on error.
+OPENSSL_EXPORT int BIO_new_bio_pair(BIO **out1, size_t writebuf1, BIO **out2,
+                                    size_t writebuf2);
+
+// BIO_ctrl_get_read_request returns the number of bytes that the other side of
+// |bio| tried (unsuccessfully) to read.
+OPENSSL_EXPORT size_t BIO_ctrl_get_read_request(BIO *bio);
+
+// BIO_ctrl_get_write_guarantee returns the number of bytes that |bio| (which
+// must have been returned by |BIO_new_bio_pair|) will accept on the next
+// |BIO_write| call.
+OPENSSL_EXPORT size_t BIO_ctrl_get_write_guarantee(BIO *bio);
+
+// BIO_shutdown_wr marks |bio| as closed, from the point of view of the other
+// side of the pair. Future |BIO_write| calls on |bio| will fail. It returns
+// one on success and zero otherwise.
+OPENSSL_EXPORT int BIO_shutdown_wr(BIO *bio);
+
+
+// Custom BIOs.
+//
+// Consumers can create custom |BIO|s by filling in a |BIO_METHOD| and using
+// low-level control functions to set state.
+
+// BIO_get_new_index returns a new "type" value for a custom |BIO|.
+OPENSSL_EXPORT int BIO_get_new_index(void);
+
+// BIO_meth_new returns a newly-allocated |BIO_METHOD| or NULL on allocation
+// error. The |type| specifies the type that will be returned by
+// |BIO_method_type|. If this is unnecessary, this value may be zero. The |name|
+// parameter is vestigial and may be NULL.
+//
+// Use the |BIO_meth_set_*| functions below to initialize the |BIO_METHOD|. The
+// function implementations may use |BIO_set_data| and |BIO_get_data| to add
+// method-specific state to associated |BIO|s. Additionally, |BIO_set_init| must
+// be called after an associated |BIO| is fully initialized. State set via
+// |BIO_set_data| may be released by configuring a destructor with
+// |BIO_meth_set_destroy|.
+OPENSSL_EXPORT BIO_METHOD *BIO_meth_new(int type, const char *name);
+
+// BIO_meth_free releases memory associated with |method|.
+OPENSSL_EXPORT void BIO_meth_free(BIO_METHOD *method);
+
+// BIO_meth_set_create sets a function to be called on |BIO_new| for |method|
+// and returns one. The function should return one on success and zero on
+// error.
+OPENSSL_EXPORT int BIO_meth_set_create(BIO_METHOD *method,
+                                       int (*create)(BIO *));
+
+// BIO_meth_set_destroy sets a function to release data associated with a |BIO|
+// and returns one. The function's return value is ignored.
+OPENSSL_EXPORT int BIO_meth_set_destroy(BIO_METHOD *method,
+                                        int (*destroy)(BIO *));
+
+// BIO_meth_set_write sets the implementation of |BIO_write| for |method| and
+// returns one. |BIO_METHOD|s which implement |BIO_write| should also implement
+// |BIO_CTRL_FLUSH|. (See |BIO_meth_set_ctrl|.)
+OPENSSL_EXPORT int BIO_meth_set_write(BIO_METHOD *method,
+                                      int (*write)(BIO *, const char *, int));
+
+// BIO_meth_set_read sets the implementation of |BIO_read| for |method| and
+// returns one.
+OPENSSL_EXPORT int BIO_meth_set_read(BIO_METHOD *method,
+                                     int (*read)(BIO *, char *, int));
+
+// BIO_meth_set_gets sets the implementation of |BIO_gets| for |method| and
+// returns one.
+OPENSSL_EXPORT int BIO_meth_set_gets(BIO_METHOD *method,
+                                     int (*gets)(BIO *, char *, int));
+
+// BIO_meth_set_ctrl sets the implementation of |BIO_ctrl| for |method| and
+// returns one.
+OPENSSL_EXPORT int BIO_meth_set_ctrl(BIO_METHOD *method,
+                                     long (*ctrl)(BIO *, int, long, void *));
+
+// BIO_set_data sets custom data on |bio|. It may be retried with
+// |BIO_get_data|.
+OPENSSL_EXPORT void BIO_set_data(BIO *bio, void *ptr);
+
+// BIO_get_data returns custom data on |bio| set by |BIO_get_data|.
+OPENSSL_EXPORT void *BIO_get_data(BIO *bio);
+
+// BIO_set_init sets whether |bio| has been fully initialized. Until fully
+// initialized, |BIO_read| and |BIO_write| will fail.
+OPENSSL_EXPORT void BIO_set_init(BIO *bio, int init);
+
+// BIO_get_init returns whether |bio| has been fully initialized.
+OPENSSL_EXPORT int BIO_get_init(BIO *bio);
+
+// These are values of the |cmd| argument to |BIO_ctrl|.
+
+// BIO_CTRL_RESET implements |BIO_reset|. The arguments are unused.
+#define BIO_CTRL_RESET 1
+
+// BIO_CTRL_EOF implements |BIO_eof|. The arguments are unused.
+#define BIO_CTRL_EOF 2
+
+// BIO_CTRL_INFO is a legacy command that returns information specific to the
+// type of |BIO|. It is not safe to call generically and should not be
+// implemented in new |BIO| types.
+#define BIO_CTRL_INFO 3
+
+// BIO_CTRL_GET_CLOSE returns the close flag set by |BIO_CTRL_SET_CLOSE|. The
+// arguments are unused.
+#define BIO_CTRL_GET_CLOSE 8
+
+// BIO_CTRL_SET_CLOSE implements |BIO_set_close|. The |larg| argument is the
+// close flag.
+#define BIO_CTRL_SET_CLOSE 9
+
+// BIO_CTRL_PENDING implements |BIO_pending|. The arguments are unused.
+#define BIO_CTRL_PENDING 10
+
+// BIO_CTRL_FLUSH implements |BIO_flush|. The arguments are unused.
+#define BIO_CTRL_FLUSH 11
+
+// BIO_CTRL_WPENDING implements |BIO_wpending|. The arguments are unused.
+#define BIO_CTRL_WPENDING 13
+
+// BIO_CTRL_SET_CALLBACK sets an informational callback of type
+// int cb(BIO *bio, int state, int ret)
+#define BIO_CTRL_SET_CALLBACK 14
+
+// BIO_CTRL_GET_CALLBACK returns the callback set by |BIO_CTRL_SET_CALLBACK|.
+#define BIO_CTRL_GET_CALLBACK 15
+
+// The following are never used, but are defined to aid porting existing code.
+#define BIO_CTRL_SET 4
+#define BIO_CTRL_GET 5
+#define BIO_CTRL_PUSH 6
+#define BIO_CTRL_POP 7
+#define BIO_CTRL_DUP 12
+#define BIO_CTRL_SET_FILENAME 30
+
+
+// Deprecated functions.
+
+// BIO_f_base64 returns a filter |BIO| that base64-encodes data written into
+// it, and decodes data read from it. |BIO_gets| is not supported. Call
+// |BIO_flush| when done writing, to signal that no more data are to be
+// encoded. The flag |BIO_FLAGS_BASE64_NO_NL| may be set to encode all the data
+// on one line.
+//
+// Use |EVP_EncodeBlock| and |EVP_DecodeBase64| instead.
+OPENSSL_EXPORT const BIO_METHOD *BIO_f_base64(void);
+
+OPENSSL_EXPORT void BIO_set_retry_special(BIO *bio);
+
+// BIO_set_write_buffer_size returns zero.
+OPENSSL_EXPORT int BIO_set_write_buffer_size(BIO *bio, int buffer_size);
+
+// BIO_set_shutdown sets a method-specific "shutdown" bit on |bio|.
+OPENSSL_EXPORT void BIO_set_shutdown(BIO *bio, int shutdown);
+
+// BIO_get_shutdown returns the method-specific "shutdown" bit.
+OPENSSL_EXPORT int BIO_get_shutdown(BIO *bio);
+
+// BIO_meth_set_puts returns one. |BIO_puts| is implemented with |BIO_write| in
+// BoringSSL.
+OPENSSL_EXPORT int BIO_meth_set_puts(BIO_METHOD *method,
+                                     int (*puts)(BIO *, const char *));
+
+
+// Private functions
+
+#define BIO_FLAGS_READ 0x01
+#define BIO_FLAGS_WRITE 0x02
+#define BIO_FLAGS_IO_SPECIAL 0x04
+#define BIO_FLAGS_RWS (BIO_FLAGS_READ | BIO_FLAGS_WRITE | BIO_FLAGS_IO_SPECIAL)
+#define BIO_FLAGS_SHOULD_RETRY 0x08
+#define BIO_FLAGS_BASE64_NO_NL 0x100
+// BIO_FLAGS_MEM_RDONLY is used with memory BIOs. It means we shouldn't free up
+// or change the data in any way.
+#define BIO_FLAGS_MEM_RDONLY 0x200
+
+// These are the 'types' of BIOs
+#define BIO_TYPE_NONE 0
+#define BIO_TYPE_MEM (1 | 0x0400)
+#define BIO_TYPE_FILE (2 | 0x0400)
+#define BIO_TYPE_FD (4 | 0x0400 | 0x0100)
+#define BIO_TYPE_SOCKET (5 | 0x0400 | 0x0100)
+#define BIO_TYPE_NULL (6 | 0x0400)
+#define BIO_TYPE_SSL (7 | 0x0200)
+#define BIO_TYPE_MD (8 | 0x0200)                 // passive filter
+#define BIO_TYPE_BUFFER (9 | 0x0200)             // filter
+#define BIO_TYPE_CIPHER (10 | 0x0200)            // filter
+#define BIO_TYPE_BASE64 (11 | 0x0200)            // filter
+#define BIO_TYPE_CONNECT (12 | 0x0400 | 0x0100)  // socket - connect
+#define BIO_TYPE_ACCEPT (13 | 0x0400 | 0x0100)   // socket for accept
+#define BIO_TYPE_PROXY_CLIENT (14 | 0x0200)      // client proxy BIO
+#define BIO_TYPE_PROXY_SERVER (15 | 0x0200)      // server proxy BIO
+#define BIO_TYPE_NBIO_TEST (16 | 0x0200)         // server proxy BIO
+#define BIO_TYPE_NULL_FILTER (17 | 0x0200)
+#define BIO_TYPE_BER (18 | 0x0200)         // BER -> bin filter
+#define BIO_TYPE_BIO (19 | 0x0400)         // (half a) BIO pair
+#define BIO_TYPE_LINEBUFFER (20 | 0x0200)  // filter
+#define BIO_TYPE_DGRAM (21 | 0x0400 | 0x0100)
+#define BIO_TYPE_ASN1 (22 | 0x0200)  // filter
+#define BIO_TYPE_COMP (23 | 0x0200)  // filter
+
+// BIO_TYPE_DESCRIPTOR denotes that the |BIO| responds to the |BIO_C_SET_FD|
+// (|BIO_set_fd|) and |BIO_C_GET_FD| (|BIO_get_fd|) control hooks.
+#define BIO_TYPE_DESCRIPTOR 0x0100  // socket, fd, connect or accept
+#define BIO_TYPE_FILTER 0x0200
+#define BIO_TYPE_SOURCE_SINK 0x0400
+
+// BIO_TYPE_START is the first user-allocated |BIO| type. No pre-defined type,
+// flag bits aside, may exceed this value.
+#define BIO_TYPE_START 128
+
+struct bio_method_st {
+  int type;
+  const char *name;
+  int (*bwrite)(BIO *, const char *, int);
+  int (*bread)(BIO *, char *, int);
+  // TODO(fork): remove bputs.
+  int (*bputs)(BIO *, const char *);
+  int (*bgets)(BIO *, char *, int);
+  long (*ctrl)(BIO *, int, long, void *);
+  int (*create)(BIO *);
+  int (*destroy)(BIO *);
+  long (*callback_ctrl)(BIO *, int, bio_info_cb);
+};
+
+struct bio_st {
+  const BIO_METHOD *method;
+
+  // init is non-zero if this |BIO| has been initialised.
+  int init;
+  // shutdown is often used by specific |BIO_METHOD|s to determine whether
+  // they own some underlying resource. This flag can often by controlled by
+  // |BIO_set_close|. For example, whether an fd BIO closes the underlying fd
+  // when it, itself, is closed.
+  int shutdown;
+  int flags;
+  int retry_reason;
+  // num is a BIO-specific value. For example, in fd BIOs it's used to store a
+  // file descriptor.
+  int num;
+  CRYPTO_refcount_t references;
+  void *ptr;
+  // next_bio points to the next |BIO| in a chain. This |BIO| owns a reference
+  // to |next_bio|.
+  BIO *next_bio;  // used by filter BIOs
+  size_t num_read, num_write;
+};
+
+#define BIO_C_SET_CONNECT 100
+#define BIO_C_DO_STATE_MACHINE 101
+#define BIO_C_SET_NBIO 102
+#define BIO_C_SET_PROXY_PARAM 103
+#define BIO_C_SET_FD 104
+#define BIO_C_GET_FD 105
+#define BIO_C_SET_FILE_PTR 106
+#define BIO_C_GET_FILE_PTR 107
+#define BIO_C_SET_FILENAME 108
+#define BIO_C_SET_SSL 109
+#define BIO_C_GET_SSL 110
+#define BIO_C_SET_MD 111
+#define BIO_C_GET_MD 112
+#define BIO_C_GET_CIPHER_STATUS 113
+#define BIO_C_SET_BUF_MEM 114
+#define BIO_C_GET_BUF_MEM_PTR 115
+#define BIO_C_GET_BUFF_NUM_LINES 116
+#define BIO_C_SET_BUFF_SIZE 117
+#define BIO_C_SET_ACCEPT 118
+#define BIO_C_SSL_MODE 119
+#define BIO_C_GET_MD_CTX 120
+#define BIO_C_GET_PROXY_PARAM 121
+#define BIO_C_SET_BUFF_READ_DATA 122  // data to read first
+#define BIO_C_GET_ACCEPT 124
+#define BIO_C_SET_SSL_RENEGOTIATE_BYTES 125
+#define BIO_C_GET_SSL_NUM_RENEGOTIATES 126
+#define BIO_C_SET_SSL_RENEGOTIATE_TIMEOUT 127
+#define BIO_C_FILE_SEEK 128
+#define BIO_C_GET_CIPHER_CTX 129
+#define BIO_C_SET_BUF_MEM_EOF_RETURN 130  // return end of input value
+#define BIO_C_SET_BIND_MODE 131
+#define BIO_C_GET_BIND_MODE 132
+#define BIO_C_FILE_TELL 133
+#define BIO_C_GET_SOCKS 134
+#define BIO_C_SET_SOCKS 135
+
+#define BIO_C_SET_WRITE_BUF_SIZE 136  // for BIO_s_bio
+#define BIO_C_GET_WRITE_BUF_SIZE 137
+#define BIO_C_GET_WRITE_GUARANTEE 140
+#define BIO_C_GET_READ_REQUEST 141
+#define BIO_C_SHUTDOWN_WR 142
+#define BIO_C_NREAD0 143
+#define BIO_C_NREAD 144
+#define BIO_C_NWRITE0 145
+#define BIO_C_NWRITE 146
+#define BIO_C_RESET_READ_REQUEST 147
+#define BIO_C_SET_MD_CTX 148
+
+#define BIO_C_SET_PREFIX 149
+#define BIO_C_GET_PREFIX 150
+#define BIO_C_SET_SUFFIX 151
+#define BIO_C_GET_SUFFIX 152
+
+#define BIO_C_SET_EX_ARG 153
+#define BIO_C_GET_EX_ARG 154
+
+
+#if defined(__cplusplus)
+}  // extern C
+
+extern "C++" {
+
+BSSL_NAMESPACE_BEGIN
+
+BORINGSSL_MAKE_DELETER(BIO, BIO_free)
+BORINGSSL_MAKE_UP_REF(BIO, BIO_up_ref)
+BORINGSSL_MAKE_DELETER(BIO_METHOD, BIO_meth_free)
+
+BSSL_NAMESPACE_END
+
+}  // extern C++
+
+#endif
+
+#define BIO_R_BAD_FOPEN_MODE 100
+#define BIO_R_BROKEN_PIPE 101
+#define BIO_R_CONNECT_ERROR 102
+#define BIO_R_ERROR_SETTING_NBIO 103
+#define BIO_R_INVALID_ARGUMENT 104
+#define BIO_R_IN_USE 105
+#define BIO_R_KEEPALIVE 106
+#define BIO_R_NBIO_CONNECT_ERROR 107
+#define BIO_R_NO_HOSTNAME_SPECIFIED 108
+#define BIO_R_NO_PORT_SPECIFIED 109
+#define BIO_R_NO_SUCH_FILE 110
+#define BIO_R_NULL_PARAMETER 111
+#define BIO_R_SYS_LIB 112
+#define BIO_R_UNABLE_TO_CREATE_SOCKET 113
+#define BIO_R_UNINITIALIZED 114
+#define BIO_R_UNSUPPORTED_METHOD 115
+#define BIO_R_WRITE_TO_READ_ONLY_BIO 116
+
+#endif  // OPENSSL_HEADER_BIO_H