grpc 1.21.0 → 1.32.0

data/third_party/boringssl-with-bazel/src/crypto/fipsmodule/ec/p256-x86_64.h

@@ -0,0 +1,153 @@
+/*
+ * Copyright 2014-2016 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright (c) 2014, Intel Corporation. All Rights Reserved.
+ *
+ * Licensed under the OpenSSL license (the "License").  You may not use
+ * this file except in compliance with the License.  You can obtain a copy
+ * in the file LICENSE in the source distribution or at
+ * https://www.openssl.org/source/license.html
+ *
+ * Originally written by Shay Gueron (1, 2), and Vlad Krasnov (1)
+ * (1) Intel Corporation, Israel Development Center, Haifa, Israel
+ * (2) University of Haifa, Israel
+ *
+ * Reference:
+ * S.Gueron and V.Krasnov, "Fast Prime Field Elliptic Curve Cryptography with
+ *                          256 Bit Primes"
+ */
+
+#ifndef OPENSSL_HEADER_EC_P256_X86_64_H
+#define OPENSSL_HEADER_EC_P256_X86_64_H
+
+#include <openssl/base.h>
+
+#include <openssl/bn.h>
+
+#include "../bn/internal.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+
+#if !defined(OPENSSL_NO_ASM) && defined(OPENSSL_X86_64) && \
+    !defined(OPENSSL_SMALL)
+
+// P-256 field operations.
+//
+// An element mod P in P-256 is represented as a little-endian array of
+// |P256_LIMBS| |BN_ULONG|s, spanning the full range of values.
+//
+// The following functions take fully-reduced inputs mod P and give
+// fully-reduced outputs. They may be used in-place.
+
+#define P256_LIMBS (256 / BN_BITS2)
+
+// ecp_nistz256_neg sets |res| to -|a| mod P.
+void ecp_nistz256_neg(BN_ULONG res[P256_LIMBS], const BN_ULONG a[P256_LIMBS]);
+
+// ecp_nistz256_mul_mont sets |res| to |a| * |b| * 2^-256 mod P.
+void ecp_nistz256_mul_mont(BN_ULONG res[P256_LIMBS],
+                           const BN_ULONG a[P256_LIMBS],
+                           const BN_ULONG b[P256_LIMBS]);
+
+// ecp_nistz256_sqr_mont sets |res| to |a| * |a| * 2^-256 mod P.
+void ecp_nistz256_sqr_mont(BN_ULONG res[P256_LIMBS],
+                           const BN_ULONG a[P256_LIMBS]);
+
+// ecp_nistz256_from_mont sets |res| to |in|, converted from Montgomery domain
+// by multiplying with 1.
+static inline void ecp_nistz256_from_mont(BN_ULONG res[P256_LIMBS],
+                                          const BN_ULONG in[P256_LIMBS]) {
+  static const BN_ULONG ONE[P256_LIMBS] = { 1 };
+  ecp_nistz256_mul_mont(res, in, ONE);
+}
+
+// ecp_nistz256_to_mont sets |res| to |in|, converted to Montgomery domain
+// by multiplying with RR = 2^512 mod P precomputed for NIST P256 curve.
+static inline void ecp_nistz256_to_mont(BN_ULONG res[P256_LIMBS],
+                                        const BN_ULONG in[P256_LIMBS]) {
+  static const BN_ULONG RR[P256_LIMBS] = {
+      TOBN(0x00000000, 0x00000003), TOBN(0xfffffffb, 0xffffffff),
+      TOBN(0xffffffff, 0xfffffffe), TOBN(0x00000004, 0xfffffffd)};
+  ecp_nistz256_mul_mont(res, in, RR);
+}
+
+
+// P-256 scalar operations.
+//
+// The following functions compute modulo N, where N is the order of P-256. They
+// take fully-reduced inputs and give fully-reduced outputs.
+
+// ecp_nistz256_ord_mul_mont sets |res| to |a| * |b| where inputs and outputs
+// are in Montgomery form. That is, |res| is |a| * |b| * 2^-256 mod N.
+void ecp_nistz256_ord_mul_mont(BN_ULONG res[P256_LIMBS],
+                               const BN_ULONG a[P256_LIMBS],
+                               const BN_ULONG b[P256_LIMBS]);
+
+// ecp_nistz256_ord_sqr_mont sets |res| to |a|^(2*|rep|) where inputs and
+// outputs are in Montgomery form. That is, |res| is
+// (|a| * 2^-256)^(2*|rep|) * 2^256 mod N.
+void ecp_nistz256_ord_sqr_mont(BN_ULONG res[P256_LIMBS],
+                               const BN_ULONG a[P256_LIMBS], BN_ULONG rep);
+
+// beeu_mod_inverse_vartime sets out = a^-1 mod p using a Euclidean algorithm.
+// Assumption: 0 < a < p < 2^(256) and p is odd.
+int beeu_mod_inverse_vartime(BN_ULONG out[P256_LIMBS],
+                             const BN_ULONG a[P256_LIMBS],
+                             const BN_ULONG p[P256_LIMBS]);
+
+
+// P-256 point operations.
+//
+// The following functions may be used in-place. All coordinates are in the
+// Montgomery domain.
+
+// A P256_POINT represents a P-256 point in Jacobian coordinates.
+typedef struct {
+  BN_ULONG X[P256_LIMBS];
+  BN_ULONG Y[P256_LIMBS];
+  BN_ULONG Z[P256_LIMBS];
+} P256_POINT;
+
+// A P256_POINT_AFFINE represents a P-256 point in affine coordinates. Infinity
+// is encoded as (0, 0).
+typedef struct {
+  BN_ULONG X[P256_LIMBS];
+  BN_ULONG Y[P256_LIMBS];
+} P256_POINT_AFFINE;
+
+// ecp_nistz256_select_w5 sets |*val| to |in_t[index-1]| if 1 <= |index| <= 16
+// and all zeros (the point at infinity) if |index| is 0. This is done in
+// constant time.
+void ecp_nistz256_select_w5(P256_POINT *val, const P256_POINT in_t[16],
+                            int index);
+
+// ecp_nistz256_select_w7 sets |*val| to |in_t[index-1]| if 1 <= |index| <= 64
+// and all zeros (the point at infinity) if |index| is 0. This is done in
+// constant time.
+void ecp_nistz256_select_w7(P256_POINT_AFFINE *val,
+                            const P256_POINT_AFFINE in_t[64], int index);
+
+// ecp_nistz256_point_double sets |r| to |a| doubled.
+void ecp_nistz256_point_double(P256_POINT *r, const P256_POINT *a);
+
+// ecp_nistz256_point_add adds |a| to |b| and places the result in |r|.
+void ecp_nistz256_point_add(P256_POINT *r, const P256_POINT *a,
+                            const P256_POINT *b);
+
+// ecp_nistz256_point_add_affine adds |a| to |b| and places the result in
+// |r|. |a| and |b| must not represent the same point unless they are both
+// infinity.
+void ecp_nistz256_point_add_affine(P256_POINT *r, const P256_POINT *a,
+                                   const P256_POINT_AFFINE *b);
+
+#endif /* !defined(OPENSSL_NO_ASM) && defined(OPENSSL_X86_64) && \
+           !defined(OPENSSL_SMALL) */
+
+
+#if defined(__cplusplus)
+}  // extern C++
+#endif
+
+#endif  // OPENSSL_HEADER_EC_P256_X86_64_H

data/third_party/boringssl-with-bazel/src/crypto/fipsmodule/ec/p256.c

@@ -0,0 +1,740 @@
+/* Copyright (c) 2020, Google Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */
+
+// An implementation of the NIST P-256 elliptic curve point multiplication.
+// 256-bit Montgomery form for 64 and 32-bit. Field operations are generated by
+// Fiat, which lives in //third_party/fiat.
+
+#include <openssl/base.h>
+
+#include <openssl/bn.h>
+#include <openssl/ec.h>
+#include <openssl/err.h>
+#include <openssl/mem.h>
+#include <openssl/type_check.h>
+
+#include <assert.h>
+#include <string.h>
+
+#include "../../internal.h"
+#include "../delocate.h"
+#include "./internal.h"
+
+
+// MSVC does not implement uint128_t, and crashes with intrinsics
+#if defined(BORINGSSL_HAS_UINT128)
+#define BORINGSSL_NISTP256_64BIT 1
+#include "../../../third_party/fiat/p256_64.h"
+#else
+#include "../../../third_party/fiat/p256_32.h"
+#endif
+
+
+// utility functions, handwritten
+
+#if defined(BORINGSSL_NISTP256_64BIT)
+#define FIAT_P256_NLIMBS 4
+typedef uint64_t fiat_p256_limb_t;
+typedef uint64_t fiat_p256_felem[FIAT_P256_NLIMBS];
+static const fiat_p256_felem fiat_p256_one = {0x1, 0xffffffff00000000,
+                                              0xffffffffffffffff, 0xfffffffe};
+#else  // 64BIT; else 32BIT
+#define FIAT_P256_NLIMBS 8
+typedef uint32_t fiat_p256_limb_t;
+typedef uint32_t fiat_p256_felem[FIAT_P256_NLIMBS];
+static const fiat_p256_felem fiat_p256_one = {
+    0x1, 0x0, 0x0, 0xffffffff, 0xffffffff, 0xffffffff, 0xfffffffe, 0x0};
+#endif  // 64BIT
+
+
+static fiat_p256_limb_t fiat_p256_nz(
+    const fiat_p256_limb_t in1[FIAT_P256_NLIMBS]) {
+  fiat_p256_limb_t ret;
+  fiat_p256_nonzero(&ret, in1);
+  return ret;
+}
+
+static void fiat_p256_copy(fiat_p256_limb_t out[FIAT_P256_NLIMBS],
+                           const fiat_p256_limb_t in1[FIAT_P256_NLIMBS]) {
+  for (size_t i = 0; i < FIAT_P256_NLIMBS; i++) {
+    out[i] = in1[i];
+  }
+}
+
+static void fiat_p256_cmovznz(fiat_p256_limb_t out[FIAT_P256_NLIMBS],
+                              fiat_p256_limb_t t,
+                              const fiat_p256_limb_t z[FIAT_P256_NLIMBS],
+                              const fiat_p256_limb_t nz[FIAT_P256_NLIMBS]) {
+  fiat_p256_selectznz(out, !!t, z, nz);
+}
+
+static void fiat_p256_from_generic(fiat_p256_felem out, const EC_FELEM *in) {
+  fiat_p256_from_bytes(out, in->bytes);
+}
+
+static void fiat_p256_to_generic(EC_FELEM *out, const fiat_p256_felem in) {
+  // This works because 256 is a multiple of 64, so there are no excess bytes to
+  // zero when rounding up to |BN_ULONG|s.
+  OPENSSL_STATIC_ASSERT(
+      256 / 8 == sizeof(BN_ULONG) * ((256 + BN_BITS2 - 1) / BN_BITS2),
+      "fiat_p256_to_bytes leaves bytes uninitialized");
+  fiat_p256_to_bytes(out->bytes, in);
+}
+
+// fiat_p256_inv_square calculates |out| = |in|^{-2}
+//
+// Based on Fermat's Little Theorem:
+//   a^p = a (mod p)
+//   a^{p-1} = 1 (mod p)
+//   a^{p-3} = a^{-2} (mod p)
+static void fiat_p256_inv_square(fiat_p256_felem out,
+                                 const fiat_p256_felem in) {
+  // This implements the addition chain described in
+  // https://briansmith.org/ecc-inversion-addition-chains-01#p256_field_inversion
+  fiat_p256_felem x2, x3, x6, x12, x15, x30, x32;
+  fiat_p256_square(x2, in);   // 2^2 - 2^1
+  fiat_p256_mul(x2, x2, in);  // 2^2 - 2^0
+
+  fiat_p256_square(x3, x2);   // 2^3 - 2^1
+  fiat_p256_mul(x3, x3, in);  // 2^3 - 2^0
+
+  fiat_p256_square(x6, x3);
+  for (int i = 1; i < 3; i++) {
+    fiat_p256_square(x6, x6);
+  }                           // 2^6 - 2^3
+  fiat_p256_mul(x6, x6, x3);  // 2^6 - 2^0
+
+  fiat_p256_square(x12, x6);
+  for (int i = 1; i < 6; i++) {
+    fiat_p256_square(x12, x12);
+  }                             // 2^12 - 2^6
+  fiat_p256_mul(x12, x12, x6);  // 2^12 - 2^0
+
+  fiat_p256_square(x15, x12);
+  for (int i = 1; i < 3; i++) {
+    fiat_p256_square(x15, x15);
+  }                             // 2^15 - 2^3
+  fiat_p256_mul(x15, x15, x3);  // 2^15 - 2^0
+
+  fiat_p256_square(x30, x15);
+  for (int i = 1; i < 15; i++) {
+    fiat_p256_square(x30, x30);
+  }                              // 2^30 - 2^15
+  fiat_p256_mul(x30, x30, x15);  // 2^30 - 2^0
+
+  fiat_p256_square(x32, x30);
+  fiat_p256_square(x32, x32);   // 2^32 - 2^2
+  fiat_p256_mul(x32, x32, x2);  // 2^32 - 2^0
+
+  fiat_p256_felem ret;
+  fiat_p256_square(ret, x32);
+  for (int i = 1; i < 31 + 1; i++) {
+    fiat_p256_square(ret, ret);
+  }                             // 2^64 - 2^32
+  fiat_p256_mul(ret, ret, in);  // 2^64 - 2^32 + 2^0
+
+  for (int i = 0; i < 96 + 32; i++) {
+    fiat_p256_square(ret, ret);
+  }                              // 2^192 - 2^160 + 2^128
+  fiat_p256_mul(ret, ret, x32);  // 2^192 - 2^160 + 2^128 + 2^32 - 2^0
+
+  for (int i = 0; i < 32; i++) {
+    fiat_p256_square(ret, ret);
+  }                              // 2^224 - 2^192 + 2^160 + 2^64 - 2^32
+  fiat_p256_mul(ret, ret, x32);  // 2^224 - 2^192 + 2^160 + 2^64 - 2^0
+
+  for (int i = 0; i < 30; i++) {
+    fiat_p256_square(ret, ret);
+  }                              // 2^254 - 2^222 + 2^190 + 2^94 - 2^30
+  fiat_p256_mul(ret, ret, x30);  // 2^254 - 2^222 + 2^190 + 2^94 - 2^0
+
+  fiat_p256_square(ret, ret);
+  fiat_p256_square(out, ret);  // 2^256 - 2^224 + 2^192 + 2^96 - 2^2
+}
+
+// Group operations
+// ----------------
+//
+// Building on top of the field operations we have the operations on the
+// elliptic curve group itself. Points on the curve are represented in Jacobian
+// coordinates.
+//
+// Both operations were transcribed to Coq and proven to correspond to naive
+// implementations using Affine coordinates, for all suitable fields.  In the
+// Coq proofs, issues of constant-time execution and memory layout (aliasing)
+// conventions were not considered. Specification of affine coordinates:
+// <https://github.com/mit-plv/fiat-crypto/blob/79f8b5f39ed609339f0233098dee1a3c4e6b3080/src/Spec/WeierstrassCurve.v#L28>
+// As a sanity check, a proof that these points form a commutative group:
+// <https://github.com/mit-plv/fiat-crypto/blob/79f8b5f39ed609339f0233098dee1a3c4e6b3080/src/Curves/Weierstrass/AffineProofs.v#L33>
+
+// fiat_p256_point_double calculates 2*(x_in, y_in, z_in)
+//
+// The method is taken from:
+//   http://hyperelliptic.org/EFD/g1p/auto-shortw-jacobian-3.html#doubling-dbl-2001-b
+//
+// Coq transcription and correctness proof:
+// <https://github.com/mit-plv/fiat-crypto/blob/79f8b5f39ed609339f0233098dee1a3c4e6b3080/src/Curves/Weierstrass/Jacobian.v#L93>
+// <https://github.com/mit-plv/fiat-crypto/blob/79f8b5f39ed609339f0233098dee1a3c4e6b3080/src/Curves/Weierstrass/Jacobian.v#L201>
+//
+// Outputs can equal corresponding inputs, i.e., x_out == x_in is allowed.
+// while x_out == y_in is not (maybe this works, but it's not tested).
+static void fiat_p256_point_double(fiat_p256_felem x_out, fiat_p256_felem y_out,
+                                   fiat_p256_felem z_out,
+                                   const fiat_p256_felem x_in,
+                                   const fiat_p256_felem y_in,
+                                   const fiat_p256_felem z_in) {
+  fiat_p256_felem delta, gamma, beta, ftmp, ftmp2, tmptmp, alpha, fourbeta;
+  // delta = z^2
+  fiat_p256_square(delta, z_in);
+  // gamma = y^2
+  fiat_p256_square(gamma, y_in);
+  // beta = x*gamma
+  fiat_p256_mul(beta, x_in, gamma);
+
+  // alpha = 3*(x-delta)*(x+delta)
+  fiat_p256_sub(ftmp, x_in, delta);
+  fiat_p256_add(ftmp2, x_in, delta);
+
+  fiat_p256_add(tmptmp, ftmp2, ftmp2);
+  fiat_p256_add(ftmp2, ftmp2, tmptmp);
+  fiat_p256_mul(alpha, ftmp, ftmp2);
+
+  // x' = alpha^2 - 8*beta
+  fiat_p256_square(x_out, alpha);
+  fiat_p256_add(fourbeta, beta, beta);
+  fiat_p256_add(fourbeta, fourbeta, fourbeta);
+  fiat_p256_add(tmptmp, fourbeta, fourbeta);
+  fiat_p256_sub(x_out, x_out, tmptmp);
+
+  // z' = (y + z)^2 - gamma - delta
+  fiat_p256_add(delta, gamma, delta);
+  fiat_p256_add(ftmp, y_in, z_in);
+  fiat_p256_square(z_out, ftmp);
+  fiat_p256_sub(z_out, z_out, delta);
+
+  // y' = alpha*(4*beta - x') - 8*gamma^2
+  fiat_p256_sub(y_out, fourbeta, x_out);
+  fiat_p256_add(gamma, gamma, gamma);
+  fiat_p256_square(gamma, gamma);
+  fiat_p256_mul(y_out, alpha, y_out);
+  fiat_p256_add(gamma, gamma, gamma);
+  fiat_p256_sub(y_out, y_out, gamma);
+}
+
+// fiat_p256_point_add calculates (x1, y1, z1) + (x2, y2, z2)
+//
+// The method is taken from:
+//   http://hyperelliptic.org/EFD/g1p/auto-shortw-jacobian-3.html#addition-add-2007-bl,
+// adapted for mixed addition (z2 = 1, or z2 = 0 for the point at infinity).
+//
+// Coq transcription and correctness proof:
+// <https://github.com/mit-plv/fiat-crypto/blob/79f8b5f39ed609339f0233098dee1a3c4e6b3080/src/Curves/Weierstrass/Jacobian.v#L135>
+// <https://github.com/mit-plv/fiat-crypto/blob/79f8b5f39ed609339f0233098dee1a3c4e6b3080/src/Curves/Weierstrass/Jacobian.v#L205>
+//
+// This function includes a branch for checking whether the two input points
+// are equal, (while not equal to the point at infinity). This case never
+// happens during single point multiplication, so there is no timing leak for
+// ECDH or ECDSA signing.
+static void fiat_p256_point_add(fiat_p256_felem x3, fiat_p256_felem y3,
+                                fiat_p256_felem z3, const fiat_p256_felem x1,
+                                const fiat_p256_felem y1,
+                                const fiat_p256_felem z1, const int mixed,
+                                const fiat_p256_felem x2,
+                                const fiat_p256_felem y2,
+                                const fiat_p256_felem z2) {
+  fiat_p256_felem x_out, y_out, z_out;
+  fiat_p256_limb_t z1nz = fiat_p256_nz(z1);
+  fiat_p256_limb_t z2nz = fiat_p256_nz(z2);
+
+  // z1z1 = z1z1 = z1**2
+  fiat_p256_felem z1z1;
+  fiat_p256_square(z1z1, z1);
+
+  fiat_p256_felem u1, s1, two_z1z2;
+  if (!mixed) {
+    // z2z2 = z2**2
+    fiat_p256_felem z2z2;
+    fiat_p256_square(z2z2, z2);
+
+    // u1 = x1*z2z2
+    fiat_p256_mul(u1, x1, z2z2);
+
+    // two_z1z2 = (z1 + z2)**2 - (z1z1 + z2z2) = 2z1z2
+    fiat_p256_add(two_z1z2, z1, z2);
+    fiat_p256_square(two_z1z2, two_z1z2);
+    fiat_p256_sub(two_z1z2, two_z1z2, z1z1);
+    fiat_p256_sub(two_z1z2, two_z1z2, z2z2);
+
+    // s1 = y1 * z2**3
+    fiat_p256_mul(s1, z2, z2z2);
+    fiat_p256_mul(s1, s1, y1);
+  } else {
+    // We'll assume z2 = 1 (special case z2 = 0 is handled later).
+
+    // u1 = x1*z2z2
+    fiat_p256_copy(u1, x1);
+    // two_z1z2 = 2z1z2
+    fiat_p256_add(two_z1z2, z1, z1);
+    // s1 = y1 * z2**3
+    fiat_p256_copy(s1, y1);
+  }
+
+  // u2 = x2*z1z1
+  fiat_p256_felem u2;
+  fiat_p256_mul(u2, x2, z1z1);
+
+  // h = u2 - u1
+  fiat_p256_felem h;
+  fiat_p256_sub(h, u2, u1);
+
+  fiat_p256_limb_t xneq = fiat_p256_nz(h);
+
+  // z_out = two_z1z2 * h
+  fiat_p256_mul(z_out, h, two_z1z2);
+
+  // z1z1z1 = z1 * z1z1
+  fiat_p256_felem z1z1z1;
+  fiat_p256_mul(z1z1z1, z1, z1z1);
+
+  // s2 = y2 * z1**3
+  fiat_p256_felem s2;
+  fiat_p256_mul(s2, y2, z1z1z1);
+
+  // r = (s2 - s1)*2
+  fiat_p256_felem r;
+  fiat_p256_sub(r, s2, s1);
+  fiat_p256_add(r, r, r);
+
+  fiat_p256_limb_t yneq = fiat_p256_nz(r);
+
+  fiat_p256_limb_t is_nontrivial_double = constant_time_is_zero_w(xneq | yneq) &
+                                          ~constant_time_is_zero_w(z1nz) &
+                                          ~constant_time_is_zero_w(z2nz);
+  if (is_nontrivial_double) {
+    fiat_p256_point_double(x3, y3, z3, x1, y1, z1);
+    return;
+  }
+
+  // I = (2h)**2
+  fiat_p256_felem i;
+  fiat_p256_add(i, h, h);
+  fiat_p256_square(i, i);
+
+  // J = h * I
+  fiat_p256_felem j;
+  fiat_p256_mul(j, h, i);
+
+  // V = U1 * I
+  fiat_p256_felem v;
+  fiat_p256_mul(v, u1, i);
+
+  // x_out = r**2 - J - 2V
+  fiat_p256_square(x_out, r);
+  fiat_p256_sub(x_out, x_out, j);
+  fiat_p256_sub(x_out, x_out, v);
+  fiat_p256_sub(x_out, x_out, v);
+
+  // y_out = r(V-x_out) - 2 * s1 * J
+  fiat_p256_sub(y_out, v, x_out);
+  fiat_p256_mul(y_out, y_out, r);
+  fiat_p256_felem s1j;
+  fiat_p256_mul(s1j, s1, j);
+  fiat_p256_sub(y_out, y_out, s1j);
+  fiat_p256_sub(y_out, y_out, s1j);
+
+  fiat_p256_cmovznz(x_out, z1nz, x2, x_out);
+  fiat_p256_cmovznz(x3, z2nz, x1, x_out);
+  fiat_p256_cmovznz(y_out, z1nz, y2, y_out);
+  fiat_p256_cmovznz(y3, z2nz, y1, y_out);
+  fiat_p256_cmovznz(z_out, z1nz, z2, z_out);
+  fiat_p256_cmovznz(z3, z2nz, z1, z_out);
+}
+
+#include "./p256_table.h"
+
+// fiat_p256_select_point_affine selects the |idx-1|th point from a
+// precomputation table and copies it to out. If |idx| is zero, the output is
+// the point at infinity.
+static void fiat_p256_select_point_affine(
+    const fiat_p256_limb_t idx, size_t size,
+    const fiat_p256_felem pre_comp[/*size*/][2], fiat_p256_felem out[3]) {
+  OPENSSL_memset(out, 0, sizeof(fiat_p256_felem) * 3);
+  for (size_t i = 0; i < size; i++) {
+    fiat_p256_limb_t mismatch = i ^ (idx - 1);
+    fiat_p256_cmovznz(out[0], mismatch, pre_comp[i][0], out[0]);
+    fiat_p256_cmovznz(out[1], mismatch, pre_comp[i][1], out[1]);
+  }
+  fiat_p256_cmovznz(out[2], idx, out[2], fiat_p256_one);
+}
+
+// fiat_p256_select_point selects the |idx|th point from a precomputation table
+// and copies it to out.
+static void fiat_p256_select_point(const fiat_p256_limb_t idx, size_t size,
+                                   const fiat_p256_felem pre_comp[/*size*/][3],
+                                   fiat_p256_felem out[3]) {
+  OPENSSL_memset(out, 0, sizeof(fiat_p256_felem) * 3);
+  for (size_t i = 0; i < size; i++) {
+    fiat_p256_limb_t mismatch = i ^ idx;
+    fiat_p256_cmovznz(out[0], mismatch, pre_comp[i][0], out[0]);
+    fiat_p256_cmovznz(out[1], mismatch, pre_comp[i][1], out[1]);
+    fiat_p256_cmovznz(out[2], mismatch, pre_comp[i][2], out[2]);
+  }
+}
+
+// fiat_p256_get_bit returns the |i|th bit in |in|
+static crypto_word_t fiat_p256_get_bit(const uint8_t *in, int i) {
+  if (i < 0 || i >= 256) {
+    return 0;
+  }
+  return (in[i >> 3] >> (i & 7)) & 1;
+}
+
+// OPENSSL EC_METHOD FUNCTIONS
+
+// Takes the Jacobian coordinates (X, Y, Z) of a point and returns (X', Y') =
+// (X/Z^2, Y/Z^3).
+static int ec_GFp_nistp256_point_get_affine_coordinates(
+    const EC_GROUP *group, const EC_RAW_POINT *point, EC_FELEM *x_out,
+    EC_FELEM *y_out) {
+  if (ec_GFp_simple_is_at_infinity(group, point)) {
+    OPENSSL_PUT_ERROR(EC, EC_R_POINT_AT_INFINITY);
+    return 0;
+  }
+
+  fiat_p256_felem z1, z2;
+  fiat_p256_from_generic(z1, &point->Z);
+  fiat_p256_inv_square(z2, z1);
+
+  if (x_out != NULL) {
+    fiat_p256_felem x;
+    fiat_p256_from_generic(x, &point->X);
+    fiat_p256_mul(x, x, z2);
+    fiat_p256_to_generic(x_out, x);
+  }
+
+  if (y_out != NULL) {
+    fiat_p256_felem y;
+    fiat_p256_from_generic(y, &point->Y);
+    fiat_p256_square(z2, z2);  // z^-4
+    fiat_p256_mul(y, y, z1);   // y * z
+    fiat_p256_mul(y, y, z2);   // y * z^-3
+    fiat_p256_to_generic(y_out, y);
+  }
+
+  return 1;
+}
+
+static void ec_GFp_nistp256_add(const EC_GROUP *group, EC_RAW_POINT *r,
+                                const EC_RAW_POINT *a, const EC_RAW_POINT *b) {
+  fiat_p256_felem x1, y1, z1, x2, y2, z2;
+  fiat_p256_from_generic(x1, &a->X);
+  fiat_p256_from_generic(y1, &a->Y);
+  fiat_p256_from_generic(z1, &a->Z);
+  fiat_p256_from_generic(x2, &b->X);
+  fiat_p256_from_generic(y2, &b->Y);
+  fiat_p256_from_generic(z2, &b->Z);
+  fiat_p256_point_add(x1, y1, z1, x1, y1, z1, 0 /* both Jacobian */, x2, y2,
+                      z2);
+  fiat_p256_to_generic(&r->X, x1);
+  fiat_p256_to_generic(&r->Y, y1);
+  fiat_p256_to_generic(&r->Z, z1);
+}
+
+static void ec_GFp_nistp256_dbl(const EC_GROUP *group, EC_RAW_POINT *r,
+                                const EC_RAW_POINT *a) {
+  fiat_p256_felem x, y, z;
+  fiat_p256_from_generic(x, &a->X);
+  fiat_p256_from_generic(y, &a->Y);
+  fiat_p256_from_generic(z, &a->Z);
+  fiat_p256_point_double(x, y, z, x, y, z);
+  fiat_p256_to_generic(&r->X, x);
+  fiat_p256_to_generic(&r->Y, y);
+  fiat_p256_to_generic(&r->Z, z);
+}
+
+static void ec_GFp_nistp256_point_mul(const EC_GROUP *group, EC_RAW_POINT *r,
+                                      const EC_RAW_POINT *p,
+                                      const EC_SCALAR *scalar) {
+  fiat_p256_felem p_pre_comp[17][3];
+  OPENSSL_memset(&p_pre_comp, 0, sizeof(p_pre_comp));
+  // Precompute multiples.
+  fiat_p256_from_generic(p_pre_comp[1][0], &p->X);
+  fiat_p256_from_generic(p_pre_comp[1][1], &p->Y);
+  fiat_p256_from_generic(p_pre_comp[1][2], &p->Z);
+  for (size_t j = 2; j <= 16; ++j) {
+    if (j & 1) {
+      fiat_p256_point_add(p_pre_comp[j][0], p_pre_comp[j][1], p_pre_comp[j][2],
+                          p_pre_comp[1][0], p_pre_comp[1][1], p_pre_comp[1][2],
+                          0, p_pre_comp[j - 1][0], p_pre_comp[j - 1][1],
+                          p_pre_comp[j - 1][2]);
+    } else {
+      fiat_p256_point_double(p_pre_comp[j][0], p_pre_comp[j][1],
+                             p_pre_comp[j][2], p_pre_comp[j / 2][0],
+                             p_pre_comp[j / 2][1], p_pre_comp[j / 2][2]);
+    }
+  }
+
+  // Set nq to the point at infinity.
+  fiat_p256_felem nq[3] = {{0}, {0}, {0}}, ftmp, tmp[3];
+
+  // Loop over |scalar| msb-to-lsb, incorporating |p_pre_comp| every 5th round.
+  int skip = 1;  // Save two point operations in the first round.
+  for (size_t i = 255; i < 256; i--) {
+    // double
+    if (!skip) {
+      fiat_p256_point_double(nq[0], nq[1], nq[2], nq[0], nq[1], nq[2]);
+    }
+
+    // do other additions every 5 doublings
+    if (i % 5 == 0) {
+      crypto_word_t bits = fiat_p256_get_bit(scalar->bytes, i + 4) << 5;
+      bits |= fiat_p256_get_bit(scalar->bytes, i + 3) << 4;
+      bits |= fiat_p256_get_bit(scalar->bytes, i + 2) << 3;
+      bits |= fiat_p256_get_bit(scalar->bytes, i + 1) << 2;
+      bits |= fiat_p256_get_bit(scalar->bytes, i) << 1;
+      bits |= fiat_p256_get_bit(scalar->bytes, i - 1);
+      crypto_word_t sign, digit;
+      ec_GFp_nistp_recode_scalar_bits(&sign, &digit, bits);
+
+      // select the point to add or subtract, in constant time.
+      fiat_p256_select_point((fiat_p256_limb_t)digit, 17,
+                             (const fiat_p256_felem(*)[3])p_pre_comp, tmp);
+      fiat_p256_opp(ftmp, tmp[1]);  // (X, -Y, Z) is the negative point.
+      fiat_p256_cmovznz(tmp[1], (fiat_p256_limb_t)sign, tmp[1], ftmp);
+
+      if (!skip) {
+        fiat_p256_point_add(nq[0], nq[1], nq[2], nq[0], nq[1], nq[2],
+                            0 /* mixed */, tmp[0], tmp[1], tmp[2]);
+      } else {
+        fiat_p256_copy(nq[0], tmp[0]);
+        fiat_p256_copy(nq[1], tmp[1]);
+        fiat_p256_copy(nq[2], tmp[2]);
+        skip = 0;
+      }
+    }
+  }
+
+  fiat_p256_to_generic(&r->X, nq[0]);
+  fiat_p256_to_generic(&r->Y, nq[1]);
+  fiat_p256_to_generic(&r->Z, nq[2]);
+}
+
+static void ec_GFp_nistp256_point_mul_base(const EC_GROUP *group,
+                                           EC_RAW_POINT *r,
+                                           const EC_SCALAR *scalar) {
+  // Set nq to the point at infinity.
+  fiat_p256_felem nq[3] = {{0}, {0}, {0}}, tmp[3];
+
+  int skip = 1;  // Save two point operations in the first round.
+  for (size_t i = 31; i < 32; i--) {
+    if (!skip) {
+      fiat_p256_point_double(nq[0], nq[1], nq[2], nq[0], nq[1], nq[2]);
+    }
+
+    // First, look 32 bits upwards.
+    crypto_word_t bits = fiat_p256_get_bit(scalar->bytes, i + 224) << 3;
+    bits |= fiat_p256_get_bit(scalar->bytes, i + 160) << 2;
+    bits |= fiat_p256_get_bit(scalar->bytes, i + 96) << 1;
+    bits |= fiat_p256_get_bit(scalar->bytes, i + 32);
+    // Select the point to add, in constant time.
+    fiat_p256_select_point_affine((fiat_p256_limb_t)bits, 15,
+                                  fiat_p256_g_pre_comp[1], tmp);
+
+    if (!skip) {
+      fiat_p256_point_add(nq[0], nq[1], nq[2], nq[0], nq[1], nq[2],
+                          1 /* mixed */, tmp[0], tmp[1], tmp[2]);
+    } else {
+      fiat_p256_copy(nq[0], tmp[0]);
+      fiat_p256_copy(nq[1], tmp[1]);
+      fiat_p256_copy(nq[2], tmp[2]);
+      skip = 0;
+    }
+
+    // Second, look at the current position.
+    bits = fiat_p256_get_bit(scalar->bytes, i + 192) << 3;
+    bits |= fiat_p256_get_bit(scalar->bytes, i + 128) << 2;
+    bits |= fiat_p256_get_bit(scalar->bytes, i + 64) << 1;
+    bits |= fiat_p256_get_bit(scalar->bytes, i);
+    // Select the point to add, in constant time.
+    fiat_p256_select_point_affine((fiat_p256_limb_t)bits, 15,
+                                  fiat_p256_g_pre_comp[0], tmp);
+    fiat_p256_point_add(nq[0], nq[1], nq[2], nq[0], nq[1], nq[2], 1 /* mixed */,
+                        tmp[0], tmp[1], tmp[2]);
+  }
+
+  fiat_p256_to_generic(&r->X, nq[0]);
+  fiat_p256_to_generic(&r->Y, nq[1]);
+  fiat_p256_to_generic(&r->Z, nq[2]);
+}
+
+static void ec_GFp_nistp256_point_mul_public(const EC_GROUP *group,
+                                             EC_RAW_POINT *r,
+                                             const EC_SCALAR *g_scalar,
+                                             const EC_RAW_POINT *p,
+                                             const EC_SCALAR *p_scalar) {
+#define P256_WSIZE_PUBLIC 4
+  // Precompute multiples of |p|. p_pre_comp[i] is (2*i+1) * |p|.
+  fiat_p256_felem p_pre_comp[1 << (P256_WSIZE_PUBLIC - 1)][3];
+  fiat_p256_from_generic(p_pre_comp[0][0], &p->X);
+  fiat_p256_from_generic(p_pre_comp[0][1], &p->Y);
+  fiat_p256_from_generic(p_pre_comp[0][2], &p->Z);
+  fiat_p256_felem p2[3];
+  fiat_p256_point_double(p2[0], p2[1], p2[2], p_pre_comp[0][0],
+                         p_pre_comp[0][1], p_pre_comp[0][2]);
+  for (size_t i = 1; i < OPENSSL_ARRAY_SIZE(p_pre_comp); i++) {
+    fiat_p256_point_add(p_pre_comp[i][0], p_pre_comp[i][1], p_pre_comp[i][2],
+                        p_pre_comp[i - 1][0], p_pre_comp[i - 1][1],
+                        p_pre_comp[i - 1][2], 0 /* not mixed */, p2[0], p2[1],
+                        p2[2]);
+  }
+
+  // Set up the coefficients for |p_scalar|.
+  int8_t p_wNAF[257];
+  ec_compute_wNAF(group, p_wNAF, p_scalar, 256, P256_WSIZE_PUBLIC);
+
+  // Set |ret| to the point at infinity.
+  int skip = 1;  // Save some point operations.
+  fiat_p256_felem ret[3] = {{0}, {0}, {0}};
+  for (int i = 256; i >= 0; i--) {
+    if (!skip) {
+      fiat_p256_point_double(ret[0], ret[1], ret[2], ret[0], ret[1], ret[2]);
+    }
+
+    // For the |g_scalar|, we use the precomputed table without the
+    // constant-time lookup.
+    if (i <= 31) {
+      // First, look 32 bits upwards.
+      crypto_word_t bits = fiat_p256_get_bit(g_scalar->bytes, i + 224) << 3;
+      bits |= fiat_p256_get_bit(g_scalar->bytes, i + 160) << 2;
+      bits |= fiat_p256_get_bit(g_scalar->bytes, i + 96) << 1;
+      bits |= fiat_p256_get_bit(g_scalar->bytes, i + 32);
+      if (bits != 0) {
+        size_t index = (size_t)(bits - 1);
+        fiat_p256_point_add(ret[0], ret[1], ret[2], ret[0], ret[1], ret[2],
+                            1 /* mixed */, fiat_p256_g_pre_comp[1][index][0],
+                            fiat_p256_g_pre_comp[1][index][1],
+                            fiat_p256_one);
+        skip = 0;
+      }
+
+      // Second, look at the current position.
+      bits = fiat_p256_get_bit(g_scalar->bytes, i + 192) << 3;
+      bits |= fiat_p256_get_bit(g_scalar->bytes, i + 128) << 2;
+      bits |= fiat_p256_get_bit(g_scalar->bytes, i + 64) << 1;
+      bits |= fiat_p256_get_bit(g_scalar->bytes, i);
+      if (bits != 0) {
+        size_t index = (size_t)(bits - 1);
+        fiat_p256_point_add(ret[0], ret[1], ret[2], ret[0], ret[1], ret[2],
+                            1 /* mixed */, fiat_p256_g_pre_comp[0][index][0],
+                            fiat_p256_g_pre_comp[0][index][1],
+                            fiat_p256_one);
+        skip = 0;
+      }
+    }
+
+    int digit = p_wNAF[i];
+    if (digit != 0) {
+      assert(digit & 1);
+      size_t idx = (size_t)(digit < 0 ? (-digit) >> 1 : digit >> 1);
+      fiat_p256_felem *y = &p_pre_comp[idx][1], tmp;
+      if (digit < 0) {
+        fiat_p256_opp(tmp, p_pre_comp[idx][1]);
+        y = &tmp;
+      }
+      if (!skip) {
+        fiat_p256_point_add(ret[0], ret[1], ret[2], ret[0], ret[1], ret[2],
+                            0 /* not mixed */, p_pre_comp[idx][0], *y,
+                            p_pre_comp[idx][2]);
+      } else {
+        fiat_p256_copy(ret[0], p_pre_comp[idx][0]);
+        fiat_p256_copy(ret[1], *y);
+        fiat_p256_copy(ret[2], p_pre_comp[idx][2]);
+        skip = 0;
+      }
+    }
+  }
+
+  fiat_p256_to_generic(&r->X, ret[0]);
+  fiat_p256_to_generic(&r->Y, ret[1]);
+  fiat_p256_to_generic(&r->Z, ret[2]);
+}
+
+static int ec_GFp_nistp256_cmp_x_coordinate(const EC_GROUP *group,
+                                            const EC_RAW_POINT *p,
+                                            const EC_SCALAR *r) {
+  if (ec_GFp_simple_is_at_infinity(group, p)) {
+    return 0;
+  }
+
+  // We wish to compare X/Z^2 with r. This is equivalent to comparing X with
+  // r*Z^2. Note that X and Z are represented in Montgomery form, while r is
+  // not.
+  fiat_p256_felem Z2_mont;
+  fiat_p256_from_generic(Z2_mont, &p->Z);
+  fiat_p256_mul(Z2_mont, Z2_mont, Z2_mont);
+
+  fiat_p256_felem r_Z2;
+  fiat_p256_from_bytes(r_Z2, r->bytes);  // r < order < p, so this is valid.
+  fiat_p256_mul(r_Z2, r_Z2, Z2_mont);
+
+  fiat_p256_felem X;
+  fiat_p256_from_generic(X, &p->X);
+  fiat_p256_from_montgomery(X, X);
+
+  if (OPENSSL_memcmp(&r_Z2, &X, sizeof(r_Z2)) == 0) {
+    return 1;
+  }
+
+  // During signing the x coefficient is reduced modulo the group order.
+  // Therefore there is a small possibility, less than 1/2^128, that group_order
+  // < p.x < P. in that case we need not only to compare against |r| but also to
+  // compare against r+group_order.
+  assert(group->field.width == group->order.width);
+  if (bn_less_than_words(r->words, group->field_minus_order.words,
+                         group->field.width)) {
+    // We can ignore the carry because: r + group_order < p < 2^256.
+    EC_FELEM tmp;
+    bn_add_words(tmp.words, r->words, group->order.d, group->order.width);
+    fiat_p256_from_generic(r_Z2, &tmp);
+    fiat_p256_mul(r_Z2, r_Z2, Z2_mont);
+    if (OPENSSL_memcmp(&r_Z2, &X, sizeof(r_Z2)) == 0) {
+      return 1;
+    }
+  }
+
+  return 0;
+}
+
+DEFINE_METHOD_FUNCTION(EC_METHOD, EC_GFp_nistp256_method) {
+  out->group_init = ec_GFp_mont_group_init;
+  out->group_finish = ec_GFp_mont_group_finish;
+  out->group_set_curve = ec_GFp_mont_group_set_curve;
+  out->point_get_affine_coordinates =
+      ec_GFp_nistp256_point_get_affine_coordinates;
+  out->add = ec_GFp_nistp256_add;
+  out->dbl = ec_GFp_nistp256_dbl;
+  out->mul = ec_GFp_nistp256_point_mul;
+  out->mul_base = ec_GFp_nistp256_point_mul_base;
+  out->mul_public = ec_GFp_nistp256_point_mul_public;
+  out->felem_mul = ec_GFp_mont_felem_mul;
+  out->felem_sqr = ec_GFp_mont_felem_sqr;
+  out->felem_to_bytes = ec_GFp_mont_felem_to_bytes;
+  out->felem_from_bytes = ec_GFp_mont_felem_from_bytes;
+  out->scalar_inv0_montgomery = ec_simple_scalar_inv0_montgomery;
+  out->scalar_to_montgomery_inv_vartime =
+      ec_simple_scalar_to_montgomery_inv_vartime;
+  out->cmp_x_coordinate = ec_GFp_nistp256_cmp_x_coordinate;
+}
+
+#undef BORINGSSL_NISTP256_64BIT