exiftool_vendored 10.31.0 → 10.40.0

data/bin/Image-ExifTool-10.31/lib/Image/ExifTool/PostScript.pm

@@ -1,699 +0,0 @@
-#------------------------------------------------------------------------------
-# File:         PostScript.pm
-#
-# Description:  Read PostScript meta information
-#
-# Revisions:    07/08/2005 - P. Harvey Created
-#
-# References:   1) http://partners.adobe.com/public/developer/en/ps/5002.EPSF_Spec.pdf
-#               2) http://partners.adobe.com/public/developer/en/ps/5001.DSC_Spec.pdf
-#               3) http://partners.adobe.com/public/developer/en/illustrator/sdk/AI7FileFormat.pdf
-#------------------------------------------------------------------------------
-
-package Image::ExifTool::PostScript;
-
-use strict;
-use vars qw($VERSION $AUTOLOAD);
-use Image::ExifTool qw(:DataAccess :Utils);
-
-$VERSION = '1.41';
-
-sub WritePS($$);
-sub ProcessPS($$;$);
-
-# PostScript tag table
-%Image::ExifTool::PostScript::Main = (
-    PROCESS_PROC => \&ProcessPS,
-    WRITE_PROC => \&WritePS,
-    PREFERRED => 1, # always add these tags when writing
-    GROUPS => { 2 => 'Image' },
-    # Note: Make all of these tags priority 0 since the first one found at
-    # the start of the file should take priority (in case multiples exist)
-    Author      => { Priority => 0, Groups => { 2 => 'Author' }, Writable => 'string' },
-    BoundingBox => { Priority => 0 },
-    Copyright   => { Priority => 0, Writable => 'string' }, #2
-    CreationDate => {
-        Name => 'CreateDate',
-        Priority => 0,
-        Groups => { 2 => 'Time' },
-        Writable => 'string',
-        PrintConv => '$self->ConvertDateTime($val)',
-        PrintConvInv => '$self->InverseDateTime($val)',
-    },
-    Creator     => { Priority => 0, Writable => 'string' },
-    ImageData   => { Priority => 0 },
-    For         => { Priority => 0, Writable => 'string', Notes => 'for whom the document was prepared'},
-    Keywords    => { Priority => 0, Writable => 'string' },
-    ModDate => {
-        Name => 'ModifyDate',
-        Priority => 0,
-        Groups => { 2 => 'Time' },
-        Writable => 'string',
-        PrintConv => '$self->ConvertDateTime($val)',
-        PrintConvInv => '$self->InverseDateTime($val)',
-    },
-    Pages       => { Priority => 0 },
-    Routing     => { Priority => 0, Writable => 'string' }, #2
-    Subject     => { Priority => 0, Writable => 'string' },
-    Title       => { Priority => 0, Writable => 'string' },
-    Version     => { Priority => 0, Writable => 'string' }, #2
-    # these subdirectories for documentation only
-    BeginPhotoshop => {
-        Name => 'PhotoshopData',
-        SubDirectory => {
-            TagTable => 'Image::ExifTool::Photoshop::Main',
-        },
-    },
-    BeginICCProfile => {
-        Name => 'ICC_Profile',
-        SubDirectory => {
-            TagTable => 'Image::ExifTool::ICC_Profile::Main',
-        },
-    },
-    begin_xml_packet => {
-        Name => 'XMP',
-        SubDirectory => {
-            TagTable => 'Image::ExifTool::XMP::Main',
-        },
-    },
-    TIFFPreview => {
-        Groups => { 2 => 'Preview' },
-        Binary => 1,
-        Notes => q{
-            not a real tag ID, but used to represent the TIFF preview extracted from DOS
-            EPS images
-        },
-    },
-    BeginDocument => {
-        Name => 'EmbeddedFile',
-        SubDirectory => {
-            TagTable => 'Image::ExifTool::PostScript::Main',
-        },
-        Notes => 'extracted with ExtractEmbedded option',
-    },
-    EmbeddedFileName => {
-        Notes => q{
-            not a real tag ID, but the file name from a BeginDocument statement.
-            Extracted with document metadata when ExtractEmbedded option is used
-        },
-    },
-);
-
-# composite tags
-%Image::ExifTool::PostScript::Composite = (
-    GROUPS => { 2 => 'Image' },
-    # BoundingBox is in points, not pixels,
-    # but use it anyway if ImageData is not available
-    ImageWidth => {
-        Desire => {
-            0 => 'Main:PostScript:ImageData',
-            1 => 'PostScript:BoundingBox',
-        },
-        ValueConv => 'Image::ExifTool::PostScript::ImageSize(\@val, 0)',
-    },
-    ImageHeight => {
-        Desire => {
-            0 => 'Main:PostScript:ImageData',
-            1 => 'PostScript:BoundingBox',
-        },
-        ValueConv => 'Image::ExifTool::PostScript::ImageSize(\@val, 1)',
-    },
-);
-
-# add our composite tags
-Image::ExifTool::AddCompositeTags('Image::ExifTool::PostScript');
-
-#------------------------------------------------------------------------------
-# AutoLoad our writer routines when necessary
-#
-sub AUTOLOAD
-{
-    return Image::ExifTool::DoAutoLoad($AUTOLOAD, @_);
-}
-
-#------------------------------------------------------------------------------
-# Is this a PC system
-# Returns: true for PC systems
-my %isPC = (MSWin32 => 1, os2 => 1, dos => 1, NetWare => 1, symbian => 1, cygwin => 1);
-sub IsPC()
-{
-    return $isPC{$^O};
-}
-
-#------------------------------------------------------------------------------
-# Get image width or height
-# Inputs: 0) value list ref (ImageData, BoundingBox), 1) true to get height
-sub ImageSize($$)
-{
-    my ($vals, $getHeight) = @_;
-    my ($w, $h);
-    if ($$vals[0] and $$vals[0] =~ /^(\d+) (\d+)/) {
-        ($w, $h) = ($1, $2);
-    } elsif ($$vals[1] and $$vals[1] =~ /^(\d+) (\d+) (\d+) (\d+)/) {
-        ($w, $h) = ($3 - $1, $4 - $2);
-    }
-    return $getHeight ? $h : $w;
-}
-
-#------------------------------------------------------------------------------
-# Set PostScript format error warning
-# Inputs: 0) ExifTool object reference, 1) error string
-# Returns: 1
-sub PSErr($$)
-{
-    my ($et, $str) = @_;
-    # set file type if not done already
-    my $ext = $$et{FILE_EXT};
-    $et->SetFileType(($ext and $ext eq 'AI') ? 'AI' : 'PS');
-    $et->Warn("PostScript format error ($str)");
-    return 1;
-}
-
-#------------------------------------------------------------------------------
-# Return input record separator to use for the specified file
-# Inputs: 0) RAF reference
-# Returns: Input record separator or undef on error
-sub GetInputRecordSeparator($)
-{
-    my $raf = shift;
-    my $pos = $raf->Tell(); # save current position
-    my ($data, $sep);
-    $raf->Read($data,256) or return undef;
-    my ($a, $d) = (999,999);
-    $a = pos($data), pos($data) = 0 if $data =~ /\x0a/g;
-    $d = pos($data) if $data =~ /\x0d/g;
-    my $diff = $a - $d;
-    if ($diff eq 1) {
-        $sep = "\x0d\x0a";
-    } elsif ($diff eq -1) {
-        $sep = "\x0a\x0d";
-    } elsif ($diff > 0) {
-        $sep = "\x0d";
-    } elsif ($diff < 0) {
-        $sep = "\x0a";
-    } # else error
-    $raf->Seek($pos, 0);    # restore original position
-    return $sep;
-}
-
-#------------------------------------------------------------------------------
-# Decode comment from PostScript file
-# Inputs: 0) comment string, 1) RAF ref, 2) reference to lines array
-#         3) optional data reference for extra lines read from file
-# Returns: Decoded comment string (may be an array reference)
-# - handles multi-line comments and escape sequences
-sub DecodeComment($$$;$)
-{
-    my ($val, $raf, $lines, $dataPt) = @_;
-    $val =~ s/\x0d*\x0a*$//;        # remove trailing CR, LF or CR/LF
-    # check for continuation comments
-    for (;;) {
-        unless (@$lines) {
-            my $buff;
-            $raf->ReadLine($buff) or last;
-            my $altnl = $/ eq "\x0d" ? "\x0a" : "\x0d";
-            if ($buff =~ /$altnl/) {
-                chomp $buff if $/ eq "\x0d\x0a";        # remove DOS newline before splitting
-                # split into separate lines
-                @$lines = split /$altnl/, $buff, -1;
-                # handle case of DOS newline data inside file using Unix newlines
-                @$lines = ( $$lines[0] . $$lines[1] ) if @$lines == 2 and $$lines[1] eq $/;
-                # add back trailing DOS newline if necessary
-                @$lines ? @$lines[-1] .= $/ : push @$lines, $/ if $/ eq "\x0d\x0a";
-            } else {
-                push @$lines, $buff;
-            }
-        }
-        last unless $$lines[0] =~ /^%%\+/;  # is the next line a continuation?
-        $$dataPt .= $$lines[0] if $dataPt;  # add to data if necessary
-        $$lines[0] =~ s/\x0d*\x0a*$//;      # remove trailing CR, LF or CR/LF
-        $val .= substr(shift(@$lines), 3);  # add to value (without leading "%%+")
-    }
-    my @vals;
-    # handle bracketed string values
-    if ($val =~ s/^\((.*)\)$/$1/) { # remove brackets if necessary
-        # split into an array of strings if necessary
-        my $nesting = 1;
-        while ($val =~ /(\(|\))/g) {
-            my $bra = $1;
-            my $pos = pos($val) - 2;
-            my $backslashes = 0;
-            while ($pos and substr($val, $pos, 1) eq '\\') {
-                --$pos;
-                ++$backslashes;
-            }
-            next if $backslashes & 0x01;    # escaped if odd number
-            if ($bra eq '(') {
-                ++$nesting;
-            } else {
-                --$nesting;
-                unless ($nesting) {
-                    push @vals, substr($val, 0, pos($val)-1);
-                    $val = substr($val, pos($val));
-                    ++$nesting if $val =~ s/\s*\(//;
-                }
-            }
-        }
-        push @vals, $val;
-        foreach $val (@vals) {
-            # decode escape sequences in bracketed strings
-            # (similar to code in PDF.pm, but without line continuation)
-            while ($val =~ /\\(.)/sg) {
-                my $n = pos($val) - 2;
-                my $c = $1;
-                my $r;
-                if ($c =~ /[0-7]/) {
-                    # get up to 2 more octal digits
-                    $c .= $1 if $val =~ /\G([0-7]{1,2})/g;
-                    # convert octal escape code
-                    $r = chr(oct($c) & 0xff);
-                } else {
-                    # convert escaped characters
-                    ($r = $c) =~ tr/nrtbf/\n\r\t\b\f/;
-                }
-                substr($val, $n, length($c)+1) = $r;
-                # continue search after this character
-                pos($val) = $n + length($r);
-            }
-        }
-        $val = @vals > 1 ? \@vals : $vals[0];
-    }
-    return $val;
-}
-
-#------------------------------------------------------------------------------
-# Unescape PostScript string
-# Inputs: 0) string
-# Returns: unescaped string
-sub UnescapePostScript($)
-{
-    my $str = shift;
-    # decode escape sequences in literal strings
-    while ($str =~ /\\(.)/sg) {
-        my $n = pos($str) - 2;
-        my $c = $1;
-        my $r;
-        if ($c =~ /[0-7]/) {
-            # get up to 2 more octal digits
-            $c .= $1 if $str =~ /\G([0-7]{1,2})/g;
-            # convert octal escape code
-            $r = chr(oct($c) & 0xff);
-        } elsif ($c eq "\x0d") {
-            # the string is continued if the line ends with '\'
-            # (also remove "\x0d\x0a")
-            $c .= $1 if $str =~ /\G(\x0a)/g;
-            $r = '';
-        } elsif ($c eq "\x0a") {
-            $r = '';
-        } else {
-            # convert escaped characters
-            ($r = $c) =~ tr/nrtbf/\n\r\t\b\f/;
-        }
-        substr($str, $n, length($c)+1) = $r;
-        # continue search after this character
-        pos($str) = $n + length($r);
-    }
-    return $str;
-}
-
-#------------------------------------------------------------------------------
-# Extract information from EPS, PS or AI file
-# Inputs: 0) ExifTool object reference, 1) dirInfo reference, 2) optional tag table ref
-# Returns: 1 if this was a valid PostScript file
-sub ProcessPS($$;$)
-{
-    my ($et, $dirInfo, $tagTablePtr) = @_;
-    my $raf = $$dirInfo{RAF};
-    my $embedded = $et->Options('ExtractEmbedded');
-    my ($data, $dos, $endDoc, $fontTable, $comment);
-
-    # allow read from data
-    unless ($raf) {
-        $raf = new File::RandomAccess($$dirInfo{DataPt});
-        $et->VerboseDir('PostScript');
-    }
-#
-# determine if this is a postscript file
-#
-    $raf->Read($data, 4) == 4 or return 0;
-    # accept either ASCII or DOS binary postscript file format
-    return 0 unless $data =~ /^(%!PS|%!Ad|%!Fo|\xc5\xd0\xd3\xc6)/;
-    if ($data =~ /^%!Ad/) {
-        # I've seen PS files start with "%!Adobe-PS"...
-        return 0 unless $raf->Read($data, 6) == 6 and $data eq "obe-PS";
-    } elsif ($data =~ /^\xc5\xd0\xd3\xc6/) {
-        # process DOS binary file header
-        # - save DOS header then seek ahead and check PS header
-        $raf->Read($dos, 26) == 26 or return 0;
-        SetByteOrder('II');
-        unless ($raf->Seek(Get32u(\$dos, 0), 0) and
-                $raf->Read($data, 4) == 4 and $data eq '%!PS')
-        {
-            return PSErr($et, 'invalid header');
-        }
-    } else {
-        # check for PostScript font file (PFA or PFB)
-        my $d2;
-        $data .= $d2 if $raf->Read($d2,12);
-        if ($data =~ /^%!(PS-(AdobeFont-|Bitstream )|FontType1-)/) {
-            $et->SetFileType('PFA');  # PostScript ASCII font file
-            $fontTable = GetTagTable('Image::ExifTool::Font::PSInfo');
-            # PostScript font files may contain an unformatted comments which may
-            # contain useful information, so accumulate these for the Comment tag
-            $comment = 1;
-        }
-        $raf->Seek(-length($data), 1);
-    }
-#
-# set the newline type based on the first newline found in the file
-#
-    local $/ = GetInputRecordSeparator($raf);
-    $/ or return PSErr($et, 'invalid PS data');
-
-    # set file type (PostScript or EPS)
-    $raf->ReadLine($data) or $data = '';
-    my $type;
-    if ($data =~ /EPSF/) {
-        $type = 'EPS';
-    } else {
-        # read next line to see if this is an Illustrator file
-        my $line2;
-        my $pos = $raf->Tell();
-        if ($raf->ReadLine($line2) and $line2 =~ /^%%Creator: Adobe Illustrator/) {
-            $type = 'AI';
-        } else {
-            $type = 'PS';
-        }
-        $raf->Seek($pos, 0);
-    }
-    $et->SetFileType($type);
-    return 1 if $$et{OPTIONS}{FastScan} and $$et{OPTIONS}{FastScan} == 3;
-#
-# extract TIFF information from DOS header
-#
-    $tagTablePtr or $tagTablePtr = GetTagTable('Image::ExifTool::PostScript::Main');
-    if ($dos) {
-        my $base = Get32u(\$dos, 16);
-        if ($base) {
-            my $pos = $raf->Tell();
-            # extract the TIFF preview
-            my $len = Get32u(\$dos, 20);
-            my $val = $et->ExtractBinary($base, $len, 'TIFFPreview');
-            if (defined $val and $val =~ /^(MM\0\x2a|II\x2a\0|Binary)/) {
-                $et->HandleTag($tagTablePtr, 'TIFFPreview', $val);
-            } else {
-                $et->Warn('Bad TIFF preview image');
-            }
-            # extract information from TIFF in DOS header
-            # (set Parent to '' to avoid setting FileType tag again)
-            my %dirInfo = (
-                Parent => '',
-                RAF => $raf,
-                Base => $base,
-            );
-            $et->ProcessTIFF(\%dirInfo) or $et->Warn('Bad embedded TIFF');
-            # position file pointer to extract PS information
-            $raf->Seek($pos, 0);
-        }
-    }
-#
-# parse the postscript
-#
-    my ($buff, $mode, $beginToken, $endToken, $docNum, $subDocNum, $changedNL);
-    my (@lines, $altnl);
-    if ($/ eq "\x0d") {
-        $altnl = "\x0a";
-    } else {
-        $/ = "\x0a";        # end on any LF (even if DOS CR+LF)
-        $altnl = "\x0d";
-    }
-    for (;;) {
-        if (@lines) {
-            $data = shift @lines;
-        } else {
-            $raf->ReadLine($data) or last;
-            # check for alternate newlines as efficiently as possible
-            if ($data =~ /$altnl/) {
-                if (length($data) > 500000 and IsPC()) {
-                    # Windows can't split very long lines due to poor memory handling,
-                    # so re-read the file with the other newline character instead
-                    # (slower but uses less memory)
-                    unless ($changedNL) {
-                        $changedNL = 1;
-                        my $t = $/;
-                        $/ = $altnl;
-                        $altnl = $t;
-                        $raf->Seek(-length($data), 1);
-                        next;
-                    }
-                } else {
-                    # split into separate lines
-                    @lines = split /$altnl/, $data, -1;
-                    $data = shift @lines;
-                    if (@lines == 1 and $lines[0] eq $/) {
-                        # handle case of DOS newline data inside file using Unix newlines
-                        $data .= $lines[0];
-                        undef @lines;
-                    }
-                }
-            }
-        }
-        undef $changedNL;
-        if ($mode) {
-            if (not $endToken) {
-                $buff .= $data;
-                next unless $data =~ m{<\?xpacket end=.(w|r).\?>($/|$)};
-            } elsif ($data !~ /^$endToken/i) {
-                if ($mode eq 'XMP') {
-                    $buff .= $data;
-                } elsif ($mode eq 'Document') {
-                    # ignore embedded documents, but keep track of nesting level
-                    $docNum .= '-1' if $data =~ /^$beginToken/;
-                } else {
-                    # data is ASCII-hex encoded
-                    $data =~ tr/0-9A-Fa-f//dc;  # remove all but hex characters
-                    $buff .= pack('H*', $data); # translate from hex
-                }
-                next;
-            } elsif ($mode eq 'Document') {
-                $docNum =~ s/-?\d+$//;  # decrement document nesting level
-                # done with Document mode if we are back at the top level
-                undef $mode unless $docNum;
-                next;
-            }
-        } elsif ($endDoc and $data =~ /^$endDoc/i) {
-            $docNum =~ s/-?(\d+)$//;        # decrement nesting level
-            $subDocNum = $1;                # remember our last sub-document number
-            $$et{DOC_NUM} = $docNum;
-            undef $endDoc unless $docNum;   # done with document if top level
-            next;
-        } elsif ($data =~ /^(%{1,2})(Begin)(_xml_packet|Photoshop|ICCProfile|Document|Binary)/i) {
-            # the beginning of a data block
-            my %modeLookup = (
-                _xml_packet => 'XMP',
-                photoshop   => 'Photoshop',
-                iccprofile  => 'ICC_Profile',
-                document    => 'Document',
-                binary      => undef, # (we will try to skip this)
-            );
-            $mode = $modeLookup{lc $3};
-            unless ($mode) {
-                if (not @lines and $data =~ /^%{1,2}BeginBinary:\s*(\d+)/i) {
-                    $raf->Seek($1, 1) or last;  # skip binary data
-                }
-                next;
-            }
-            $buff = '';
-            $beginToken = $1 . $2 . $3;
-            $endToken = $1 . ($2 eq 'begin' ? 'end' : 'End') . $3;
-            if ($mode eq 'Document') {
-                # this is either the 1st sub-document or Nth document
-                if ($docNum) {
-                    # increase nesting level
-                    $docNum .= '-' . (++$subDocNum);
-                } else {
-                    # this is the Nth document
-                    $docNum = $$et{DOC_COUNT} + 1;
-                }
-                $subDocNum = 0; # new level, so reset subDocNum
-                next unless $embedded;  # skip over this document
-                # set document number for family 4-7 group names
-                $$et{DOC_NUM} = $docNum;
-                $$et{LIST_TAGS} = { };  # don't build lists across different documents
-                $$et{PROCESSED} = { }; # re-initialize processed directory lookup too
-                $endDoc = $endToken;          # parse to EndDocument token
-                # reset mode to allow parsing into sub-directories
-                undef $endToken;
-                undef $mode;
-                # save document name if available
-                if ($data =~ /^$beginToken:\s+([^\n\r]+)/i) {
-                    my $docName = $1;
-                    # remove brackets if necessary
-                    $docName = $1 if $docName =~ /^\((.*)\)$/;
-                    $et->HandleTag($tagTablePtr, 'EmbeddedFileName', $docName);
-                }
-            }
-            next;
-        } elsif ($data =~ /^<\?xpacket begin=.{7,13}W5M0MpCehiHzreSzNTczkc9d/) {
-            # pick up any stray XMP data
-            $mode = 'XMP';
-            $buff = $data;
-            undef $endToken;    # no end token (just look for xpacket end)
-            # XMP could be contained in a single line (if newlines are different)
-            next unless $data =~ m{<\?xpacket end=.(w|r).\?>($/|$)};
-        } elsif ($data =~ /^%%?(\w+): ?(.*)/s and $$tagTablePtr{$1}) {
-            my ($tag, $val) = ($1, $2);
-            # only allow 'ImageData' to have single leading '%'
-            next unless $data =~ /^%%/ or $1 eq 'ImageData';
-            # decode comment string (reading continuation lines if necessary)
-            $val = DecodeComment($val, $raf, \@lines);
-            $et->HandleTag($tagTablePtr, $tag, $val);
-            next;
-        } elsif ($embedded and $data =~ /^%AI12_CompressedData/) {
-            # the rest of the file is compressed
-            unless (eval { require Compress::Zlib }) {
-                $et->Warn('Install Compress::Zlib to extract compressed embedded data');
-                last;
-            }
-            # seek back to find the start of the compressed data in the file
-            my $tlen = length($data) + @lines;
-            $tlen += length $_ foreach @lines;
-            my $backTo = $raf->Tell() - $tlen - 64;
-            $backTo = 0 if $backTo < 0;
-            last unless $raf->Seek($backTo, 0) and $raf->Read($data, 2048);
-            last unless $data =~ s/.*?%AI12_CompressedData//;
-            my $inflate = Compress::Zlib::inflateInit();
-            $inflate or $et->Warn('Error initializing inflate'), last;
-            # generate a PS-like file in memory from the compressed data
-            my $verbose = $et->Options('Verbose');
-            if ($verbose > 1) {
-                $et->VerboseDir('AI12_CompressedData (first 4kB)');
-                $et->VerboseDump(\$data);
-            }
-            # remove header if it exists (Windows AI files only)
-            $data =~ s/^.{0,256}EndData[\x0d\x0a]+//s;
-            my $val;
-            for (;;) {
-                my ($v2, $stat) = $inflate->inflate($data);
-                $stat == Compress::Zlib::Z_STREAM_END() and $val .= $v2, last;
-                $stat != Compress::Zlib::Z_OK() and undef($val), last;
-                if (defined $val) {
-                    $val .= $v2;
-                } elsif ($v2 =~ /^%!PS/) {
-                    $val = $v2;
-                } else {
-                    # add postscript header (for file recognition) if it doesn't exist
-                    $val = "%!PS-Adobe-3.0$/" . $v2;
-                }
-                $raf->Read($data, 65536) or last;
-            }
-            defined $val or $et->Warn('Error inflating AI compressed data'), last;
-            if ($verbose > 1) {
-                $et->VerboseDir('Uncompressed AI12 Data');
-                $et->VerboseDump(\$val);
-            }
-            # extract information from embedded images in the uncompressed data
-            $val =  # add PS header in case it needs one
-            ProcessPS($et, { DataPt => \$val });
-            last;
-        } elsif ($fontTable) {
-            if (defined $comment) {
-                # extract initial comments from PostScript Font files
-                if ($data =~ /^%\s+(.*?)[\x0d\x0a]/) {
-                    $comment .= "\n" if $comment;
-                    $comment .= $1;
-                    next;
-                } elsif ($data !~ /^%/) {
-                    # stop extracting comments at the first non-comment line
-                    $et->FoundTag('Comment', $comment) if length $comment;
-                    undef $comment;
-                }
-            }
-            if ($data =~ m{^\s*/(\w+)\s*(.*)} and $$fontTable{$1}) {
-                my ($tag, $val) = ($1, $2);
-                if ($val =~ /^\((.*)\)/) {
-                    $val = UnescapePostScript($1);
-                } elsif ($val =~ m{/?(\S+)}) {
-                    $val = $1;
-                }
-                $et->HandleTag($fontTable, $tag, $val);
-            } elsif ($data =~ /^currentdict end/) {
-                # only extract tags from initial FontInfo dict
-                undef $fontTable;
-            }
-            next;
-        } else {
-            next;
-        }
-        # extract information from buffered data
-        my %dirInfo = (
-            DataPt => \$buff,
-            DataLen => length $buff,
-            DirStart => 0,
-            DirLen => length $buff,
-            Parent => 'PostScript',
-        );
-        my $subTablePtr = GetTagTable("Image::ExifTool::${mode}::Main");
-        unless ($et->ProcessDirectory(\%dirInfo, $subTablePtr)) {
-            $et->Warn("Error processing $mode information in PostScript file");
-        }
-        undef $buff;
-        undef $mode;
-    }
-    $mode = 'Document' if $endDoc and not $mode;
-    $mode and PSErr($et, "unterminated $mode data");
-    return 1;
-}
-
-#------------------------------------------------------------------------------
-# Extract information from EPS file
-# Inputs: 0) ExifTool object reference, 1) dirInfo reference
-# Returns: 1 if this was a valid PostScript file
-sub ProcessEPS($$)
-{
-    return ProcessPS($_[0],$_[1]);
-}
-
-1; # end
-
-
-__END__
-
-=head1 NAME
-
-Image::ExifTool::PostScript - Read PostScript meta information
-
-=head1 SYNOPSIS
-
-This module is loaded automatically by Image::ExifTool when required.
-
-=head1 DESCRIPTION
-
-This code reads meta information from EPS (Encapsulated PostScript), PS
-(PostScript) and AI (Adobe Illustrator) files.
-
-=head1 AUTHOR
-
-Copyright 2003-2016, Phil Harvey (phil at owl.phy.queensu.ca)
-
-This library is free software; you can redistribute it and/or modify it
-under the same terms as Perl itself.
-
-=head1 REFERENCES
-
-=over 4
-
-=item L<http://partners.adobe.com/public/developer/en/ps/5002.EPSF_Spec.pdf>
-
-=item L<http://partners.adobe.com/public/developer/en/ps/5001.DSC_Spec.pdf>
-
-=item L<http://partners.adobe.com/public/developer/en/illustrator/sdk/AI7FileFormat.pdf>
-
-=back
-
-=head1 SEE ALSO
-
-L<Image::ExifTool::TagNames/PostScript Tags>,
-L<Image::ExifTool(3pm)|Image::ExifTool>
-
-=cut