xcoll 0.5.12__py3-none-any.whl → 0.6.1__py3-none-any.whl

xcoll/scattering_routines/geant4/collimasim/lib/pybind11/CMakeLists.txt

@@ -1,297 +0,0 @@
-# CMakeLists.txt -- Build system for the pybind11 modules
-#
-# Copyright (c) 2015 Wenzel Jakob <wenzel@inf.ethz.ch>
-#
-# All rights reserved. Use of this source code is governed by a
-# BSD-style license that can be found in the LICENSE file.
-
-cmake_minimum_required(VERSION 3.4)
-
-# The `cmake_minimum_required(VERSION 3.4...3.21)` syntax does not work with
-# some versions of VS that have a patched CMake 3.11. This forces us to emulate
-# the behavior using the following workaround:
-if(${CMAKE_VERSION} VERSION_LESS 3.21)
-  cmake_policy(VERSION ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION})
-else()
-  cmake_policy(VERSION 3.21)
-endif()
-
-# Extract project version from source
-file(STRINGS "${CMAKE_CURRENT_SOURCE_DIR}/include/pybind11/detail/common.h"
-     pybind11_version_defines REGEX "#define PYBIND11_VERSION_(MAJOR|MINOR|PATCH) ")
-
-foreach(ver ${pybind11_version_defines})
-  if(ver MATCHES [[#define PYBIND11_VERSION_(MAJOR|MINOR|PATCH) +([^ ]+)$]])
-    set(PYBIND11_VERSION_${CMAKE_MATCH_1} "${CMAKE_MATCH_2}")
-  endif()
-endforeach()
-
-if(PYBIND11_VERSION_PATCH MATCHES [[\.([a-zA-Z0-9]+)$]])
-  set(pybind11_VERSION_TYPE "${CMAKE_MATCH_1}")
-endif()
-string(REGEX MATCH "^[0-9]+" PYBIND11_VERSION_PATCH "${PYBIND11_VERSION_PATCH}")
-
-project(
-  pybind11
-  LANGUAGES CXX
-  VERSION "${PYBIND11_VERSION_MAJOR}.${PYBIND11_VERSION_MINOR}.${PYBIND11_VERSION_PATCH}")
-
-# Standard includes
-include(GNUInstallDirs)
-include(CMakePackageConfigHelpers)
-include(CMakeDependentOption)
-
-if(NOT pybind11_FIND_QUIETLY)
-  message(STATUS "pybind11 v${pybind11_VERSION} ${pybind11_VERSION_TYPE}")
-endif()
-
-# Avoid infinite recursion if tests include this as a subdirectory
-if(DEFINED PYBIND11_MASTER_PROJECT)
-  set(PYBIND11_TEST OFF)
-endif()
-
-# Check if pybind11 is being used directly or via add_subdirectory
-if(CMAKE_SOURCE_DIR STREQUAL PROJECT_SOURCE_DIR AND NOT DEFINED PYBIND11_MASTER_PROJECT)
-  ### Warn if not an out-of-source builds
-  if(CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_CURRENT_BINARY_DIR)
-    set(lines
-        "You are building in-place. If that is not what you intended to "
-        "do, you can clean the source directory with:\n"
-        "rm -r CMakeCache.txt CMakeFiles/ cmake_uninstall.cmake pybind11Config.cmake "
-        "pybind11ConfigVersion.cmake tests/CMakeFiles/\n")
-    message(AUTHOR_WARNING ${lines})
-  endif()
-
-  set(PYBIND11_MASTER_PROJECT ON)
-
-  if(OSX AND CMAKE_VERSION VERSION_LESS 3.7)
-    # Bug in macOS CMake < 3.7 is unable to download catch
-    message(WARNING "CMAKE 3.7+ needed on macOS to download catch, and newer HIGHLY recommended")
-  elseif(WINDOWS AND CMAKE_VERSION VERSION_LESS 3.8)
-    # Only tested with 3.8+ in CI.
-    message(WARNING "CMAKE 3.8+ tested on Windows, previous versions untested")
-  endif()
-
-  message(STATUS "CMake ${CMAKE_VERSION}")
-
-  if(CMAKE_CXX_STANDARD)
-    set(CMAKE_CXX_EXTENSIONS OFF)
-    set(CMAKE_CXX_STANDARD_REQUIRED ON)
-  endif()
-
-  set(pybind11_system "")
-else()
-  set(PYBIND11_MASTER_PROJECT OFF)
-  set(pybind11_system SYSTEM)
-endif()
-
-# Options
-option(PYBIND11_INSTALL "Install pybind11 header files?" ${PYBIND11_MASTER_PROJECT})
-option(PYBIND11_TEST "Build pybind11 test suite?" ${PYBIND11_MASTER_PROJECT})
-option(PYBIND11_NOPYTHON "Disable search for Python" OFF)
-set(PYBIND11_INTERNALS_VERSION
-    ""
-    CACHE STRING "Override the ABI version, may be used to enable the unstable ABI.")
-
-cmake_dependent_option(
-  USE_PYTHON_INCLUDE_DIR
-  "Install pybind11 headers in Python include directory instead of default installation prefix"
-  OFF "PYBIND11_INSTALL" OFF)
-
-cmake_dependent_option(PYBIND11_FINDPYTHON "Force new FindPython" OFF
-                       "NOT CMAKE_VERSION VERSION_LESS 3.12" OFF)
-
-# NB: when adding a header don't forget to also add it to setup.py
-set(PYBIND11_HEADERS
-    include/pybind11/detail/class.h
-    include/pybind11/detail/common.h
-    include/pybind11/detail/descr.h
-    include/pybind11/detail/init.h
-    include/pybind11/detail/internals.h
-    include/pybind11/detail/type_caster_base.h
-    include/pybind11/detail/typeid.h
-    include/pybind11/attr.h
-    include/pybind11/buffer_info.h
-    include/pybind11/cast.h
-    include/pybind11/chrono.h
-    include/pybind11/common.h
-    include/pybind11/complex.h
-    include/pybind11/options.h
-    include/pybind11/eigen.h
-    include/pybind11/embed.h
-    include/pybind11/eval.h
-    include/pybind11/gil.h
-    include/pybind11/iostream.h
-    include/pybind11/functional.h
-    include/pybind11/numpy.h
-    include/pybind11/operators.h
-    include/pybind11/pybind11.h
-    include/pybind11/pytypes.h
-    include/pybind11/stl.h
-    include/pybind11/stl_bind.h
-    include/pybind11/stl/filesystem.h)
-
-# Compare with grep and warn if mismatched
-if(PYBIND11_MASTER_PROJECT AND NOT CMAKE_VERSION VERSION_LESS 3.12)
-  file(
-    GLOB_RECURSE _pybind11_header_check
-    LIST_DIRECTORIES false
-    RELATIVE "${CMAKE_CURRENT_SOURCE_DIR}"
-    CONFIGURE_DEPENDS "include/pybind11/*.h")
-  set(_pybind11_here_only ${PYBIND11_HEADERS})
-  set(_pybind11_disk_only ${_pybind11_header_check})
-  list(REMOVE_ITEM _pybind11_here_only ${_pybind11_header_check})
-  list(REMOVE_ITEM _pybind11_disk_only ${PYBIND11_HEADERS})
-  if(_pybind11_here_only)
-    message(AUTHOR_WARNING "PYBIND11_HEADERS has extra files:" ${_pybind11_here_only})
-  endif()
-  if(_pybind11_disk_only)
-    message(AUTHOR_WARNING "PYBIND11_HEADERS is missing files:" ${_pybind11_disk_only})
-  endif()
-endif()
-
-# CMake 3.12 added list(TRANSFORM <list> PREPEND
-# But we can't use it yet
-string(REPLACE "include/" "${CMAKE_CURRENT_SOURCE_DIR}/include/" PYBIND11_HEADERS
-               "${PYBIND11_HEADERS}")
-
-# Cache variable so this can be used in parent projects
-set(pybind11_INCLUDE_DIR
-    "${CMAKE_CURRENT_LIST_DIR}/include"
-    CACHE INTERNAL "Directory where pybind11 headers are located")
-
-# Backward compatible variable for add_subdirectory mode
-if(NOT PYBIND11_MASTER_PROJECT)
-  set(PYBIND11_INCLUDE_DIR
-      "${pybind11_INCLUDE_DIR}"
-      CACHE INTERNAL "")
-endif()
-
-# Note: when creating targets, you cannot use if statements at configure time -
-# you need generator expressions, because those will be placed in the target file.
-# You can also place ifs *in* the Config.in, but not here.
-
-# This section builds targets, but does *not* touch Python
-# Non-IMPORT targets cannot be defined twice
-if(NOT TARGET pybind11_headers)
-  # Build the headers-only target (no Python included):
-  # (long name used here to keep this from clashing in subdirectory mode)
-  add_library(pybind11_headers INTERFACE)
-  add_library(pybind11::pybind11_headers ALIAS pybind11_headers) # to match exported target
-  add_library(pybind11::headers ALIAS pybind11_headers) # easier to use/remember
-
-  target_include_directories(
-    pybind11_headers ${pybind11_system} INTERFACE $<BUILD_INTERFACE:${pybind11_INCLUDE_DIR}>
-                                                  $<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}>)
-
-  target_compile_features(pybind11_headers INTERFACE cxx_inheriting_constructors cxx_user_literals
-                                                     cxx_right_angle_brackets)
-  if(NOT "${PYBIND11_INTERNALS_VERSION}" STREQUAL "")
-    target_compile_definitions(
-      pybind11_headers INTERFACE "PYBIND11_INTERNALS_VERSION=${PYBIND11_INTERNALS_VERSION}")
-  endif()
-else()
-  # It is invalid to install a target twice, too.
-  set(PYBIND11_INSTALL OFF)
-endif()
-
-include("${CMAKE_CURRENT_SOURCE_DIR}/tools/pybind11Common.cmake")
-
-# Relative directory setting
-if(USE_PYTHON_INCLUDE_DIR AND DEFINED Python_INCLUDE_DIRS)
-  file(RELATIVE_PATH CMAKE_INSTALL_INCLUDEDIR ${CMAKE_INSTALL_PREFIX} ${Python_INCLUDE_DIRS})
-elseif(USE_PYTHON_INCLUDE_DIR AND DEFINED PYTHON_INCLUDE_DIR)
-  file(RELATIVE_PATH CMAKE_INSTALL_INCLUDEDIR ${CMAKE_INSTALL_PREFIX} ${PYTHON_INCLUDE_DIRS})
-endif()
-
-if(PYBIND11_INSTALL)
-  install(DIRECTORY ${pybind11_INCLUDE_DIR}/pybind11 DESTINATION ${CMAKE_INSTALL_INCLUDEDIR})
-  set(PYBIND11_CMAKECONFIG_INSTALL_DIR
-      "${CMAKE_INSTALL_DATAROOTDIR}/cmake/${PROJECT_NAME}"
-      CACHE STRING "install path for pybind11Config.cmake")
-
-  if(IS_ABSOLUTE "${CMAKE_INSTALL_INCLUDEDIR}")
-    set(pybind11_INCLUDEDIR "${CMAKE_INSTALL_FULL_INCLUDEDIR}")
-  else()
-    set(pybind11_INCLUDEDIR "\$\{PACKAGE_PREFIX_DIR\}/${CMAKE_INSTALL_INCLUDEDIR}")
-  endif()
-
-  configure_package_config_file(
-    tools/${PROJECT_NAME}Config.cmake.in "${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}Config.cmake"
-    INSTALL_DESTINATION ${PYBIND11_CMAKECONFIG_INSTALL_DIR})
-
-  if(CMAKE_VERSION VERSION_LESS 3.14)
-    # Remove CMAKE_SIZEOF_VOID_P from ConfigVersion.cmake since the library does
-    # not depend on architecture specific settings or libraries.
-    set(_PYBIND11_CMAKE_SIZEOF_VOID_P ${CMAKE_SIZEOF_VOID_P})
-    unset(CMAKE_SIZEOF_VOID_P)
-
-    write_basic_package_version_file(
-      ${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}ConfigVersion.cmake
-      VERSION ${PROJECT_VERSION}
-      COMPATIBILITY AnyNewerVersion)
-
-    set(CMAKE_SIZEOF_VOID_P ${_PYBIND11_CMAKE_SIZEOF_VOID_P})
-  else()
-    # CMake 3.14+ natively supports header-only libraries
-    write_basic_package_version_file(
-      ${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}ConfigVersion.cmake
-      VERSION ${PROJECT_VERSION}
-      COMPATIBILITY AnyNewerVersion ARCH_INDEPENDENT)
-  endif()
-
-  install(
-    FILES ${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}Config.cmake
-          ${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}ConfigVersion.cmake
-          tools/FindPythonLibsNew.cmake
-          tools/pybind11Common.cmake
-          tools/pybind11Tools.cmake
-          tools/pybind11NewTools.cmake
-    DESTINATION ${PYBIND11_CMAKECONFIG_INSTALL_DIR})
-
-  if(NOT PYBIND11_EXPORT_NAME)
-    set(PYBIND11_EXPORT_NAME "${PROJECT_NAME}Targets")
-  endif()
-
-  install(TARGETS pybind11_headers EXPORT "${PYBIND11_EXPORT_NAME}")
-
-  install(
-    EXPORT "${PYBIND11_EXPORT_NAME}"
-    NAMESPACE "pybind11::"
-    DESTINATION ${PYBIND11_CMAKECONFIG_INSTALL_DIR})
-
-  # Uninstall target
-  if(PYBIND11_MASTER_PROJECT)
-    configure_file("${CMAKE_CURRENT_SOURCE_DIR}/tools/cmake_uninstall.cmake.in"
-                   "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" IMMEDIATE @ONLY)
-
-    add_custom_target(uninstall COMMAND ${CMAKE_COMMAND} -P
-                                        ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake)
-  endif()
-endif()
-
-# BUILD_TESTING takes priority, but only if this is the master project
-if(PYBIND11_MASTER_PROJECT AND DEFINED BUILD_TESTING)
-  if(BUILD_TESTING)
-    if(_pybind11_nopython)
-      message(FATAL_ERROR "Cannot activate tests in NOPYTHON mode")
-    else()
-      add_subdirectory(tests)
-    endif()
-  endif()
-else()
-  if(PYBIND11_TEST)
-    if(_pybind11_nopython)
-      message(FATAL_ERROR "Cannot activate tests in NOPYTHON mode")
-    else()
-      add_subdirectory(tests)
-    endif()
-  endif()
-endif()
-
-# Better symmetry with find_package(pybind11 CONFIG) mode.
-if(NOT PYBIND11_MASTER_PROJECT)
-  set(pybind11_FOUND
-      TRUE
-      CACHE INTERNAL "True if pybind11 and all required components found on the system")
-endif()

xcoll/scattering_routines/geant4/collimasim/lib/pybind11/LICENSE

@@ -1,29 +0,0 @@
-Copyright (c) 2016 Wenzel Jakob <wenzel.jakob@epfl.ch>, All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-   list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright notice,
-   this list of conditions and the following disclaimer in the documentation
-   and/or other materials provided with the distribution.
-
-3. Neither the name of the copyright holder nor the names of its contributors
-   may be used to endorse or promote products derived from this software
-   without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-Please also refer to the file .github/CONTRIBUTING.md, which clarifies licensing of
-external contributions to this project including patches, pull requests, etc.

xcoll/scattering_routines/geant4/collimasim/lib/pybind11/MANIFEST.in

@@ -1,6 +0,0 @@
-recursive-include pybind11/include/pybind11 *.h
-recursive-include pybind11 *.py
-recursive-include pybind11 py.typed
-recursive-include pybind11 *.pyi
-include pybind11/share/cmake/pybind11/*.cmake
-include LICENSE README.rst pyproject.toml setup.py setup.cfg

xcoll/scattering_routines/geant4/collimasim/lib/pybind11/README.rst

@@ -1,180 +0,0 @@
-.. figure:: https://github.com/pybind/pybind11/raw/master/docs/pybind11-logo.png
-   :alt: pybind11 logo
-
-**pybind11 — Seamless operability between C++11 and Python**
-
-|Latest Documentation Status| |Stable Documentation Status| |Gitter chat| |GitHub Discussions| |CI| |Build status|
-
-|Repology| |PyPI package| |Conda-forge| |Python Versions|
-
-`Setuptools example <https://github.com/pybind/python_example>`_
-• `Scikit-build example <https://github.com/pybind/scikit_build_example>`_
-• `CMake example <https://github.com/pybind/cmake_example>`_
-
-.. start
-
-
-**pybind11** is a lightweight header-only library that exposes C++ types
-in Python and vice versa, mainly to create Python bindings of existing
-C++ code. Its goals and syntax are similar to the excellent
-`Boost.Python <http://www.boost.org/doc/libs/1_58_0/libs/python/doc/>`_
-library by David Abrahams: to minimize boilerplate code in traditional
-extension modules by inferring type information using compile-time
-introspection.
-
-The main issue with Boost.Python—and the reason for creating such a
-similar project—is Boost. Boost is an enormously large and complex suite
-of utility libraries that works with almost every C++ compiler in
-existence. This compatibility has its cost: arcane template tricks and
-workarounds are necessary to support the oldest and buggiest of compiler
-specimens. Now that C++11-compatible compilers are widely available,
-this heavy machinery has become an excessively large and unnecessary
-dependency.
-
-Think of this library as a tiny self-contained version of Boost.Python
-with everything stripped away that isn’t relevant for binding
-generation. Without comments, the core header files only require ~4K
-lines of code and depend on Python (2.7 or 3.5+, or PyPy) and the C++
-standard library. This compact implementation was possible thanks to
-some of the new C++11 language features (specifically: tuples, lambda
-functions and variadic templates). Since its creation, this library has
-grown beyond Boost.Python in many ways, leading to dramatically simpler
-binding code in many common situations.
-
-Tutorial and reference documentation is provided at
-`pybind11.readthedocs.io <https://pybind11.readthedocs.io/en/latest>`_.
-A PDF version of the manual is available
-`here <https://pybind11.readthedocs.io/_/downloads/en/latest/pdf/>`_.
-And the source code is always available at
-`github.com/pybind/pybind11 <https://github.com/pybind/pybind11>`_.
-
-
-Core features
--------------
-
-
-pybind11 can map the following core C++ features to Python:
-
-- Functions accepting and returning custom data structures per value,
-  reference, or pointer
-- Instance methods and static methods
-- Overloaded functions
-- Instance attributes and static attributes
-- Arbitrary exception types
-- Enumerations
-- Callbacks
-- Iterators and ranges
-- Custom operators
-- Single and multiple inheritance
-- STL data structures
-- Smart pointers with reference counting like ``std::shared_ptr``
-- Internal references with correct reference counting
-- C++ classes with virtual (and pure virtual) methods can be extended
-  in Python
-
-Goodies
--------
-
-In addition to the core functionality, pybind11 provides some extra
-goodies:
-
-- Python 2.7, 3.5+, and PyPy/PyPy3 7.3 are supported with an
-  implementation-agnostic interface.
-
-- It is possible to bind C++11 lambda functions with captured
-  variables. The lambda capture data is stored inside the resulting
-  Python function object.
-
-- pybind11 uses C++11 move constructors and move assignment operators
-  whenever possible to efficiently transfer custom data types.
-
-- It’s easy to expose the internal storage of custom data types through
-  Pythons’ buffer protocols. This is handy e.g. for fast conversion
-  between C++ matrix classes like Eigen and NumPy without expensive
-  copy operations.
-
-- pybind11 can automatically vectorize functions so that they are
-  transparently applied to all entries of one or more NumPy array
-  arguments.
-
-- Python's slice-based access and assignment operations can be
-  supported with just a few lines of code.
-
-- Everything is contained in just a few header files; there is no need
-  to link against any additional libraries.
-
-- Binaries are generally smaller by a factor of at least 2 compared to
-  equivalent bindings generated by Boost.Python. A recent pybind11
-  conversion of PyRosetta, an enormous Boost.Python binding project,
-  `reported <http://graylab.jhu.edu/RosettaCon2016/PyRosetta-4.pdf>`_
-  a binary size reduction of **5.4x** and compile time reduction by
-  **5.8x**.
-
-- Function signatures are precomputed at compile time (using
-  ``constexpr``), leading to smaller binaries.
-
-- With little extra effort, C++ types can be pickled and unpickled
-  similar to regular Python objects.
-
-Supported compilers
--------------------
-
-1. Clang/LLVM 3.3 or newer (for Apple Xcode’s clang, this is 5.0.0 or
-   newer)
-2. GCC 4.8 or newer
-3. Microsoft Visual Studio 2015 Update 3 or newer
-4. Intel classic C++ compiler 18 or newer (ICC 20.2 tested in CI)
-5. Cygwin/GCC (previously tested on 2.5.1)
-6. NVCC (CUDA 11.0 tested in CI)
-7. NVIDIA PGI (20.9 tested in CI)
-
-About
------
-
-This project was created by `Wenzel
-Jakob <http://rgl.epfl.ch/people/wjakob>`_. Significant features and/or
-improvements to the code were contributed by Jonas Adler, Lori A. Burns,
-Sylvain Corlay, Eric Cousineau, Aaron Gokaslan, Ralf Grosse-Kunstleve, Trent Houliston, Axel
-Huebl, @hulucc, Yannick Jadoul, Sergey Lyskov Johan Mabille, Tomasz Miąsko,
-Dean Moldovan, Ben Pritchard, Jason Rhinelander, Boris Schäling, Pim
-Schellart, Henry Schreiner, Ivan Smirnov, Boris Staletic, and Patrick Stewart.
-
-We thank Google for a generous financial contribution to the continuous
-integration infrastructure used by this project.
-
-
-Contributing
-~~~~~~~~~~~~
-
-See the `contributing
-guide <https://github.com/pybind/pybind11/blob/master/.github/CONTRIBUTING.md>`_
-for information on building and contributing to pybind11.
-
-License
-~~~~~~~
-
-pybind11 is provided under a BSD-style license that can be found in the
-`LICENSE <https://github.com/pybind/pybind11/blob/master/LICENSE>`_
-file. By using, distributing, or contributing to this project, you agree
-to the terms and conditions of this license.
-
-.. |Latest Documentation Status| image:: https://readthedocs.org/projects/pybind11/badge?version=latest
-   :target: http://pybind11.readthedocs.org/en/latest
-.. |Stable Documentation Status| image:: https://img.shields.io/badge/docs-stable-blue.svg
-   :target: http://pybind11.readthedocs.org/en/stable
-.. |Gitter chat| image:: https://img.shields.io/gitter/room/gitterHQ/gitter.svg
-   :target: https://gitter.im/pybind/Lobby
-.. |CI| image:: https://github.com/pybind/pybind11/workflows/CI/badge.svg
-   :target: https://github.com/pybind/pybind11/actions
-.. |Build status| image:: https://ci.appveyor.com/api/projects/status/riaj54pn4h08xy40?svg=true
-   :target: https://ci.appveyor.com/project/wjakob/pybind11
-.. |PyPI package| image:: https://img.shields.io/pypi/v/pybind11.svg
-   :target: https://pypi.org/project/pybind11/
-.. |Conda-forge| image:: https://img.shields.io/conda/vn/conda-forge/pybind11.svg
-   :target: https://github.com/conda-forge/pybind11-feedstock
-.. |Repology| image:: https://repology.org/badge/latest-versions/python:pybind11.svg
-   :target: https://repology.org/project/python:pybind11/versions
-.. |Python Versions| image:: https://img.shields.io/pypi/pyversions/pybind11.svg
-   :target: https://pypi.org/project/pybind11/
-.. |GitHub Discussions| image:: https://img.shields.io/static/v1?label=Discussions&message=Ask&color=blue&logo=github
-   :target: https://github.com/pybind/pybind11/discussions

xcoll/scattering_routines/geant4/collimasim/lib/pybind11/docs/Doxyfile

@@ -1,23 +0,0 @@
-PROJECT_NAME           = pybind11
-INPUT                  = ../include/pybind11/
-RECURSIVE              = YES
-
-GENERATE_HTML          = NO
-GENERATE_LATEX         = NO
-GENERATE_XML           = YES
-XML_OUTPUT             = .build/doxygenxml
-XML_PROGRAMLISTING     = YES
-
-MACRO_EXPANSION        = YES
-EXPAND_ONLY_PREDEF     = YES
-EXPAND_AS_DEFINED      = PYBIND11_RUNTIME_EXCEPTION
-
-ALIASES                = "rst=\verbatim embed:rst"
-ALIASES               += "endrst=\endverbatim"
-
-QUIET                  = YES
-WARNINGS               = YES
-WARN_IF_UNDOCUMENTED   = NO
-PREDEFINED             = DOXYGEN_SHOULD_SKIP_THIS \
-                         PY_MAJOR_VERSION=3 \
-                         PYBIND11_NOINLINE