meerk40t 0.9.3001__py2.py3-none-any.whl → 0.9.7020__py2.py3-none-any.whl

meerk40t/core/view.py

@@ -1,322 +1,393 @@
-from meerk40t.core.units import MM_PER_INCH, UNITS_PER_INCH, Length
-from meerk40t.svgelements import Matrix
-
-
-class View:
-    def __init__(
-        self,
-        width,
-        height,
-        dpi=float(UNITS_PER_INCH),
-        dpi_x=None,
-        dpi_y=None,
-        native_scale_x=None,
-        native_scale_y=None,
-    ):
-        """
-        This should init the simple width and height dimensions.
-
-        The default coordinate system is (0,0), (width,0), (width,height), (0,height), In top_left, top_right,
-        bottom_right, bottom_left ordering.
-
-        @param width:
-        @param height:
-        """
-
-        if native_scale_x is not None:
-            dpi_x = UNITS_PER_INCH / native_scale_x
-        if native_scale_y is not None:
-            dpi_y = UNITS_PER_INCH / native_scale_y
-        if dpi_x is None:
-            dpi_x = dpi
-        if dpi_y is None:
-            dpi_y = dpi
-        self.width = width
-        self.height = height
-        self.dpi_x = dpi_x
-        self.dpi_y = dpi_y
-        self.dpi = (dpi_x + dpi_y) / 2.0
-        self._source = None
-        self._destination = None
-        self._matrix = None
-        self.reset()
-
-    def realize(self):
-        self._matrix = None
-
-    def __str__(self):
-        return f"View('{self.width}', '{self.height}', @{self.dpi} {self._destination})"
-
-    @property
-    def native_scale_x(self):
-        return UNITS_PER_INCH / self.dpi_x
-
-    @property
-    def native_scale_y(self):
-        return UNITS_PER_INCH / self.dpi_y
-
-    @property
-    def mm(self):
-        return self.dpi * MM_PER_INCH
-
-    def set_dims(self, width, height):
-        self.width = width
-        self.height = height
-        self.reset()
-
-    def reset(self):
-        width = float(Length(self.width))
-        height = float(Length(self.height))
-
-        top_left = 0, 0
-        top_right = width, 0
-        bottom_right = width, height
-        bottom_left = 0, height
-        self._source = top_left, top_right, bottom_right, bottom_left
-        self._destination = top_left, top_right, bottom_right, bottom_left
-        # Pre-scale destination by reverse of native scale.
-        self.scale(1.0 / self.native_scale_x, 1.0 / self.native_scale_y)
-
-    def destination_contains(self, x, y):
-        """
-        This solves the AABB of the container, not the strict solution. If a view is rotated by a non-tau/4 multiple
-        amount, we could generate false positives.
-        @param x:
-        @param y:
-        @return:
-        """
-        # This solves the AABB of the container, not the strict solution
-        x0, y0, x1, y1 = self.destination_bbox()
-        return x0 <= x <= x1 and y0 <= y <= y1
-
-    def destination_bbox(self):
-        return (
-            min(
-                self._destination[0][0],
-                self._destination[1][0],
-                self._destination[2][0],
-                self._destination[3][0],
-            ),
-            min(
-                self._destination[0][1],
-                self._destination[1][1],
-                self._destination[2][1],
-                self._destination[3][1],
-            ),
-            max(
-                self._destination[0][0],
-                self._destination[1][0],
-                self._destination[2][0],
-                self._destination[3][0],
-            ),
-            max(
-                self._destination[0][1],
-                self._destination[1][1],
-                self._destination[2][1],
-                self._destination[3][1],
-            ),
-        )
-
-    def source_contains(self, x, y):
-        """
-        This solves the AABB of the container, not the strict solution. If a view is rotated by a non-tau/4 multiple
-        amount, we could generate false positives.
-        @param x:
-        @param y:
-        @return:
-        """
-        # This solves the AABB of the container, not the strict solution
-        x0, y0, x1, y1 = self.source_bbox()
-        return x0 <= x <= x1 and y0 <= y <= y1
-
-    def source_bbox(self):
-        return (
-            min(
-                self._source[0][0],
-                self._source[1][0],
-                self._source[2][0],
-                self._source[3][0],
-            ),
-            min(
-                self._source[0][1],
-                self._source[1][1],
-                self._source[2][1],
-                self._source[3][1],
-            ),
-            max(
-                self._source[0][0],
-                self._source[1][0],
-                self._source[2][0],
-                self._source[3][0],
-            ),
-            max(
-                self._source[0][1],
-                self._source[1][1],
-                self._source[2][1],
-                self._source[3][1],
-            ),
-        )
-
-    def scale(self, scale_x, scale_y):
-        width = float(Length(self.width))
-        height = float(Length(self.height))
-
-        width *= scale_x
-        height *= scale_y
-        top_left, top_right, bottom_right, bottom_left = self._destination
-        top_left, top_right, bottom_right, bottom_left = (
-            (top_left[0] * scale_x, top_left[1] * scale_y),
-            (top_right[0] * scale_x, top_right[1] * scale_y),
-            (bottom_right[0] * scale_x, bottom_right[1] * scale_y),
-            (bottom_left[0] * scale_x, bottom_left[1] * scale_y),
-        )
-        self._destination = top_left, top_right, bottom_right, bottom_left
-        self._matrix = None
-
-    def origin(self, origin_x, origin_y):
-        width = float(Length(self.width))
-        height = float(Length(self.height))
-
-        dx = -width * origin_x
-        dy = -height * origin_y
-
-        top_left, top_right, bottom_right, bottom_left = self._destination
-        self._destination = (
-            (top_left[0] + dx, top_left[1] + dy),
-            (top_right[0] + dx, top_right[1] + dy),
-            (bottom_right[0] + dx, bottom_right[1] + dy),
-            (bottom_left[0] + dx, bottom_left[1] + dy),
-        )
-        self._matrix = None
-
-    def flip_x(self):
-        top_left, top_right, bottom_right, bottom_left = self._destination
-        self._destination = (
-            top_right,
-            top_left,
-            bottom_left,
-            bottom_right,
-        )
-        self._matrix = None
-
-    def flip_y(self):
-        top_left, top_right, bottom_right, bottom_left = self._destination
-        self._destination = (
-            bottom_left,
-            bottom_right,
-            top_right,
-            top_left,
-        )
-        self._matrix = None
-
-    def swap_xy(self):
-        top_left, top_right, bottom_right, bottom_left = self._destination
-        self._destination = (
-            (top_left[1], top_left[0]),
-            (top_right[1], top_right[0]),
-            (bottom_right[1], bottom_right[0]),
-            (bottom_left[1], bottom_left[0]),
-        )
-        self._matrix = None
-
-    def transform(
-        self,
-        user_scale_x=1.0,
-        user_scale_y=1.0,
-        flip_x=False,
-        flip_y=False,
-        swap_xy=False,
-    ):
-        self.reset()
-        self.scale(user_scale_x, user_scale_y)
-        if flip_x:
-            self.flip_x()
-        if flip_y:
-            self.flip_y()
-        if swap_xy:
-            self.swap_xy()
-
-    def rotate_ccw(self):
-        top_left, top_right, bottom_right, bottom_left = self._destination
-        self._destination = (top_right, bottom_right, bottom_left, top_left)
-        self._matrix = None
-
-    def rotate_cw(self):
-        top_left, top_right, bottom_right, bottom_left = self._destination
-        self._destination = (bottom_left, top_left, top_right, bottom_right)
-        self._matrix = None
-
-    def position(self, x, y, vector=False):
-        """
-        Position from the source to the destination position. The result is in destination units.
-        @param x:
-        @param y:
-        @param vector:
-        @return:
-        """
-        if not isinstance(x, (int, float)):
-            x = Length(x, relative_length=self.width, unitless=1).units
-        if not isinstance(y, (int, float)):
-            y = Length(y, relative_length=self.height, unitless=1).units
-        unit_x, unit_y = x, y
-        if vector:
-            return self.matrix.transform_vector([unit_x, unit_y])
-        return self.matrix.point_in_matrix_space([unit_x, unit_y])
-
-    def scene_position(self, x, y):
-        if not isinstance(x, (int, float)):
-            x = Length(x, relative_length=self.width, unitless=1).units
-        if not isinstance(y, (int, float)):
-            y = Length(y, relative_length=self.height, unitless=1).units
-        return x, y
-
-    def iposition(self, x, y, vector=False):
-        """
-        Position from the destination to the source position. The result is in source units.
-
-        @param x:
-        @param y:
-        @param vector:
-        @return:
-        """
-        unit_x, unit_y = x, y
-        matrix = ~self.matrix
-        if vector:
-            return matrix.transform_vector([unit_x, unit_y])
-        return matrix.point_in_matrix_space([unit_x, unit_y])
-
-    @property
-    def matrix(self):
-        if self._matrix is None:
-            self._matrix = Matrix.map(*self._source, *self._destination)
-        return self._matrix
-
-    def dpi_to_steps(self, dpi):
-        """
-        Converts a DPI to a given step amount within the device length values. So M2 Nano will have 1 step per mil,
-        the DPI of 500 therefore is step_x 2, step_y 2. A Galvo laser with a 200mm lens will have steps equal to
-        200mm/65536 ~= 0.12 mils. So a DPI of 500 needs a step size of ~16.65 for x and y. Since 500 DPI is one dot
-        per 2 mils.
-
-        Note, steps size can be negative if our driver is x or y flipped.
-
-        @param dpi:
-        @return:
-        """
-        # We require vectors so any positional offsets are non-contributing.
-        unit_x = UNITS_PER_INCH
-        unit_y = UNITS_PER_INCH
-        matrix = self.matrix
-        oneinch_x = abs(complex(*matrix.transform_vector([unit_x, 0])))
-        oneinch_y = abs(complex(*matrix.transform_vector([0, unit_y])))
-        step_x = float(oneinch_x / dpi)
-        step_y = float(oneinch_y / dpi)
-        return step_x, step_y
-
-    @property
-    def unit_width(self):
-        return float(Length(self.width))
-
-    @property
-    def unit_height(self):
-        return float(Length(self.height))
+from meerk40t.core.units import MM_PER_INCH, UNITS_PER_INCH, Length
+from meerk40t.svgelements import Matrix
+
+
+class View:
+    def __init__(
+        self,
+        width,
+        height,
+        dpi=float(UNITS_PER_INCH),
+        dpi_x=None,
+        dpi_y=None,
+        native_scale_x=None,
+        native_scale_y=None,
+    ):
+        """
+        This should init the simple width and height dimensions.
+
+        The default coordinate system is (0,0), (width,0), (width,height), (0,height), In top_left, top_right,
+        bottom_right, bottom_left ordering.
+
+        @param width:
+        @param height:
+        """
+
+        if native_scale_x is not None:
+            dpi_x = UNITS_PER_INCH / native_scale_x
+        if native_scale_y is not None:
+            dpi_y = UNITS_PER_INCH / native_scale_y
+        if dpi_x is None:
+            dpi_x = dpi
+        if dpi_y is None:
+            dpi_y = dpi
+        self.width = width
+        self.height = height
+        self.dpi_x = dpi_x
+        self.dpi_y = dpi_y
+        self.dpi = (dpi_x + dpi_y) / 2.0
+        self.margin_x = 0.0
+        self.margin_y = 0.0
+        self._source = None
+        self._destination = None
+        self._matrix = None
+        self.reset()
+
+    def realize(self):
+        self._matrix = None
+
+    def __str__(self):
+        return f"View('{self.width}', '{self.height}', @{self.dpi} {self._destination})"
+
+    @property
+    def native_scale_x(self):
+        return UNITS_PER_INCH / self.dpi_x
+
+    @property
+    def native_scale_y(self):
+        return UNITS_PER_INCH / self.dpi_y
+
+    @property
+    def mm(self):
+        return self.dpi * MM_PER_INCH
+
+    def set_native_scale(self, native_scale_x, native_scale_y):
+        """
+        Sets the native scaling for this view.
+
+        @param native_scale_x:
+        @param native_scale_y:
+        @return:
+        """
+        dpi_x = UNITS_PER_INCH / native_scale_x
+        dpi_y = UNITS_PER_INCH / native_scale_y
+        self.dpi_x = dpi_x
+        self.dpi_y = dpi_y
+        self.dpi = (dpi_x + dpi_y) / 2.0
+        self.reset()
+
+    def set_dims(self, width, height):
+        self.width = width
+        self.height = height
+        self.reset()
+
+    def set_margins(self, offset_x, offset_y):
+        self.margin_x = offset_x
+        self.margin_y = offset_y
+        # print (f"Margins were set to {offset_x}, {offset_y}")
+
+    def reset(self):
+        width = float(Length(self.width))
+        height = float(Length(self.height))
+
+        top_left = 0, 0
+        top_right = width, 0
+        bottom_right = width, height
+        bottom_left = 0, height
+        self._source = top_left, top_right, bottom_right, bottom_left
+        self._destination = top_left, top_right, bottom_right, bottom_left
+        # Pre-scale destination by reverse of native scale.
+        self.scale(1.0 / self.native_scale_x, 1.0 / self.native_scale_y)
+
+    def destination_contains(self, x, y):
+        """
+        This solves the AABB of the container, not the strict solution. If a view is rotated by a non-tau/4 multiple
+        amount, we could generate false positives.
+        @param x:
+        @param y:
+        @return:
+        """
+        # This solves the AABB of the container, not the strict solution
+        x0, y0, x1, y1 = self.destination_bbox()
+        return x0 <= x <= x1 and y0 <= y <= y1
+
+    def destination_bbox(self):
+        return (
+            min(
+                self._destination[0][0],
+                self._destination[1][0],
+                self._destination[2][0],
+                self._destination[3][0],
+            ),
+            min(
+                self._destination[0][1],
+                self._destination[1][1],
+                self._destination[2][1],
+                self._destination[3][1],
+            ),
+            max(
+                self._destination[0][0],
+                self._destination[1][0],
+                self._destination[2][0],
+                self._destination[3][0],
+            ),
+            max(
+                self._destination[0][1],
+                self._destination[1][1],
+                self._destination[2][1],
+                self._destination[3][1],
+            ),
+        )
+
+    def source_contains(self, x, y):
+        """
+        This solves the AABB of the container, not the strict solution. If a view is rotated by a non-tau/4 multiple
+        amount, we could generate false positives.
+        @param x:
+        @param y:
+        @return:
+        """
+        # This solves the AABB of the container, not the strict solution
+        x0, y0, x1, y1 = self.source_bbox()
+        return x0 <= x <= x1 and y0 <= y <= y1
+
+    def source_bbox(self):
+        return (
+            min(
+                self._source[0][0],
+                self._source[1][0],
+                self._source[2][0],
+                self._source[3][0],
+            ),
+            min(
+                self._source[0][1],
+                self._source[1][1],
+                self._source[2][1],
+                self._source[3][1],
+            ),
+            max(
+                self._source[0][0],
+                self._source[1][0],
+                self._source[2][0],
+                self._source[3][0],
+            ),
+            max(
+                self._source[0][1],
+                self._source[1][1],
+                self._source[2][1],
+                self._source[3][1],
+            ),
+        )
+
+    def scale(self, scale_x, scale_y):
+        width = float(Length(self.width))
+        height = float(Length(self.height))
+
+        width *= scale_x
+        height *= scale_y
+        top_left, top_right, bottom_right, bottom_left = self._destination
+        top_left, top_right, bottom_right, bottom_left = (
+            (top_left[0] * scale_x, top_left[1] * scale_y),
+            (top_right[0] * scale_x, top_right[1] * scale_y),
+            (bottom_right[0] * scale_x, bottom_right[1] * scale_y),
+            (bottom_left[0] * scale_x, bottom_left[1] * scale_y),
+        )
+        self._destination = top_left, top_right, bottom_right, bottom_left
+        self._matrix = None
+
+    def origin(self, origin_x, origin_y):
+        width = float(Length(self.width) / self.native_scale_x)
+        height = float(Length(self.height) / self.native_scale_x)
+
+        dx = -width * origin_x
+        dy = -height * origin_y
+
+        top_left, top_right, bottom_right, bottom_left = self._destination
+        self._destination = (
+            (top_left[0] + dx, top_left[1] + dy),
+            (top_right[0] + dx, top_right[1] + dy),
+            (bottom_right[0] + dx, bottom_right[1] + dy),
+            (bottom_left[0] + dx, bottom_left[1] + dy),
+        )
+        self._matrix = None
+
+    def flip_x(self):
+        top_left, top_right, bottom_right, bottom_left = self._destination
+        self._destination = (
+            top_right,
+            top_left,
+            bottom_left,
+            bottom_right,
+        )
+        self._matrix = None
+
+    def flip_y(self):
+        top_left, top_right, bottom_right, bottom_left = self._destination
+        self._destination = (
+            bottom_left,
+            bottom_right,
+            top_right,
+            top_left,
+        )
+        self._matrix = None
+
+    def swap_xy(self):
+        top_left, top_right, bottom_right, bottom_left = self._destination
+        self._destination = (
+            (top_left[1], top_left[0]),
+            (top_right[1], top_right[0]),
+            (bottom_right[1], bottom_right[0]),
+            (bottom_left[1], bottom_left[0]),
+        )
+        self._matrix = None
+
+    def transform(
+        self,
+        user_scale_x=1.0,
+        user_scale_y=1.0,
+        flip_x=False,
+        flip_y=False,
+        swap_xy=False,
+        origin_x=0.0,
+        origin_y=0.0,
+    ):
+        self.reset()
+        if origin_x or origin_y:
+            self.origin(origin_x, origin_y)
+        self.scale(user_scale_x, user_scale_y)
+        if flip_x:
+            self.flip_x()
+        if flip_y:
+            self.flip_y()
+        if swap_xy:
+            self.swap_xy()
+
+    def rotate_ccw(self):
+        top_left, top_right, bottom_right, bottom_left = self._destination
+        self._destination = (top_right, bottom_right, bottom_left, top_left)
+        self._matrix = None
+
+    def rotate_cw(self):
+        top_left, top_right, bottom_right, bottom_left = self._destination
+        self._destination = (bottom_left, top_left, top_right, bottom_right)
+        self._matrix = None
+
+    def _get_offset(self):
+        try:
+            off_x = Length(self.margin_x, relative_length=self.width, unitless=1).units
+        except ValueError:
+            off_x = 0
+        try:
+            off_y = Length(self.margin_y, relative_length=self.height, unitless=1).units
+        except ValueError:
+            off_y = 0
+        return off_x, off_y
+
+    def position(self, x, y, vector=False, margins=True):
+        """
+        Position from the source to the destination position. The result is in destination units.
+        @param x:
+        @param y:
+        @param vector:
+        @return:
+        """
+        if margins:
+            off_x, off_y = self._get_offset()
+        else:
+            off_x = 0
+            off_y = 0
+        # print (f"Will apply offset: {off_x}, {off_y} to {x}, {y}")
+        if not isinstance(x, (int, float)):
+            x = Length(x, relative_length=self.width, unitless=1).units
+        if not isinstance(y, (int, float)):
+            y = Length(y, relative_length=self.height, unitless=1).units
+        unit_x, unit_y = x, y
+        if vector:
+            res = self.matrix.transform_vector([unit_x, unit_y])
+            res[0] = res[0] + off_x
+            res[1] = res[1] + off_y
+            return res
+        res = self.matrix.point_in_matrix_space([unit_x, unit_y])
+        res.x = res.x + off_x
+        res.y = res.y + off_y
+        return res
+
+    def scene_position(self, x, y):
+        if not isinstance(x, (int, float)):
+            x = Length(x, relative_length=self.width, unitless=1).units
+        if not isinstance(y, (int, float)):
+            y = Length(y, relative_length=self.height, unitless=1).units
+        return x, y
+
+    def iposition(self, x, y, vector=False):
+        """
+        Position from the destination to the source position. The result is in source units.
+
+        @param x:
+        @param y:
+        @param vector:
+        @return:
+        """
+        off_x, off_y = self._get_offset()
+        unit_x = x - off_x
+        unit_y = y - off_y
+        matrix = ~self.matrix
+        if vector:
+            return matrix.transform_vector([unit_x, unit_y])
+        return matrix.point_in_matrix_space([unit_x, unit_y])
+
+    @property
+    def matrix(self):
+        if self._matrix is None:
+            self._matrix = Matrix.map(*self._source, *self._destination)
+        return self._matrix
+
+    def get_sensible_dpi_values(self) -> list:
+        # Look for dpis beyond 100 where we have an integer step value.
+        # We assume for this exercise that the x-axis is good enough
+        candidates = []
+        unit_x = UNITS_PER_INCH
+        matrix = self.matrix
+        oneinch_x = abs(complex(*matrix.transform_vector([unit_x, 0])))
+        lastdpi = None
+        for steps in range(1, 100):
+            dpi = int(round(oneinch_x / steps, 0))
+            if dpi < 75:
+                break
+            if dpi>1000:
+                continue
+            if lastdpi is None or dpi % 25 < 5 or dpi % 33 < 3:
+                lastdpi = dpi
+                candidates.append(dpi)
+        # print (candidates)
+        return candidates
+
+    def dpi_to_steps(self, dpi):
+        """
+        Converts a DPI to a given step amount within the device length values. So M2 Nano will have 1 step per mil,
+        the DPI of 500 therefore is step_x 2, step_y 2. A Galvo laser with a 200mm lens will have steps equal to
+        200mm/65536 ~= 0.12 mils. So a DPI of 500 needs a step size of ~16.65 for x and y. Since 500 DPI is one dot
+        per 2 mils.
+
+        Note, steps size can be negative if our driver is x or y flipped.
+
+        @param dpi:
+        @return:
+        """
+        # We require vectors so any positional offsets are non-contributing.
+        unit_x = UNITS_PER_INCH
+        unit_y = UNITS_PER_INCH
+        matrix = self.matrix
+        oneinch_x = abs(complex(*matrix.transform_vector([unit_x, 0])))
+        oneinch_y = abs(complex(*matrix.transform_vector([0, unit_y])))
+        step_x = float(oneinch_x / dpi)
+        step_y = float(oneinch_y / dpi)
+        return step_x, step_y
+
+    @property
+    def unit_width(self):
+        return float(Length(self.width))
+
+    @property
+    def unit_height(self):
+        return float(Length(self.height))