meerk40t 0.9.3001__py2.py3-none-any.whl → 0.9.7020__py2.py3-none-any.whl

meerk40t/ch341/mock.py

@@ -1,171 +1,171 @@
-# MIT License.
-import random
-import time
-
-
-class MockCH341Driver:
-    """
-    This is basic interface code for a mock CH341.
-    """
-
-    def __init__(self, channel=None, state=None, bulk=True):
-        self.driver_index = None
-        self.driver_value = None
-        self.channel = channel
-        self.state = state
-        self.bulk = bulk
-
-        self.mock_status = 206
-        self.mock_error = 207
-        self.mock_finish = 236
-
-        self._start_time_status = None
-        self._end_time_status = None
-        self._time_status = None
-
-    def is_connected(self):
-        return self.driver_value != -1 and self.driver_index is not None
-
-    @property
-    def driver_name(self):
-        return "Mock"
-
-    @property
-    def address(self):
-        return None
-
-    @property
-    def bus(self):
-        return None
-
-    def open(self, usb_index):
-        """
-        Opens the driver for unknown criteria.
-        """
-        _ = self.channel._
-        self.channel(_("Using Mock Driver."))
-
-        if self.driver_value is None:
-            self.channel(_("Using Mock Driver to connect."))
-            self.channel(_("Attempting connection to USB."))
-            self.state("STATE_USB_CONNECTING")
-            self.driver_value = 0  # Would connect here.
-            self.driver_index = usb_index
-            self.state("STATE_USB_CONNECTED")
-            self.channel(_("USB Connected."))
-            self.channel(_("Sending CH341 mode change to EPP1.9."))
-            try:
-                # self.driver.CH341InitParallel(self.driver_index, 1)
-                self.channel(_("CH341 mode change to EPP1.9: Success."))
-            except ConnectionError as e:
-                self.channel(str(e))
-                self.channel(_("CH341 mode change to EPP1.9: Fail."))
-                raise ConnectionRefusedError
-                # self.driver.CH341CloseDevice(self.driver_index)
-            # self.driver.CH341SetExclusive(self.driver_index, 1)
-            self.channel(_("Device Connected.\n"))
-
-    def close(self):
-        """
-        Closes the driver for the stated device index.
-        """
-        _ = self.channel._
-        self.driver_value = None
-        self.state("STATE_USB_SET_DISCONNECTING")
-        self.channel(_("Attempting disconnection from USB."))
-        if self.driver_value == -1:
-            self.channel(_("USB connection did not exist."))
-            raise ConnectionError
-        # self.driver.CH341CloseDevice(self.driver_index)
-        self.state("STATE_USB_DISCONNECTED")
-        self.channel(_("USB Disconnection Successful.\n"))
-
-    def reset(self):
-        pass
-
-    def release(self):
-        pass
-
-    def write(self, packet):
-        """
-        Writes a 32 byte packet to the device. This is typically \x00 + 30 bytes + CRC
-        The driver will packetize the \0xA6 writes.
-
-        @param packet: 32 bytes of data to be written to the CH341.
-        @return:
-        """
-        if not self.is_connected():
-            raise ConnectionError
-        if packet.startswith(b"\x00A"):
-            self._start_time_status = time.time()
-            self._end_time_status = self._start_time_status + 0.5
-            self._time_status = 204
-        if random.randint(0, 5000) == 0:
-            # Write failed.
-            raise ConnectionError
-        time.sleep(0.04)
-        # Mock
-
-    def write_addr(self, packet):
-        """
-        Writes an address byte packet to the device. This is typically 1 byte
-        The driver will packetize the \0xA7 writes.
-
-        @param packet: 1 byte of data to be written to the CH341.
-        @return:
-        """
-        if not self.is_connected():
-            raise ConnectionError
-        time.sleep(0.04)
-        # Mock.
-
-    def get_status(self):
-        """
-        Gets the status bytes from the CH341. This is usually 255 for the D0-D7 values
-        And the state flags for the chip signals. Importantly are WAIT which means do not
-        send data, and ERR which means the data sent was faulty. And PEMP which means the
-        buffer is empty.
-
-        StateBitERR      0x00000100
-        StateBitPEMP   0x00000200
-        StateBitINT      0x00000400
-        StateBitSLCT   0x00000800
-        StateBitWAIT   0x00002000
-        StateBitDATAS   0x00004000
-        StateBitADDRS   0x00008000
-        StateBitRESET   0x00010000
-        StateBitWRITE   0x00020000
-        StateBitSCL       0x00400000
-        StateBitSDA      0x00800000
-        @return:
-        """
-        if not self.is_connected():
-            raise ConnectionError
-        if self._start_time_status is not None:
-            if self._start_time_status <= time.time() <= self._end_time_status:
-                return [255, self._time_status, 0, 0, 0, 1]
-            if self._end_time_status >= time.time():
-                self._start_time_status = None
-                self._end_time_status = None
-                self._time_status = None
-
-        # Mock
-        from random import randint
-
-        if randint(0, 500) == 0:
-            status = [255, self.mock_error, 0, 0, 0, 1]
-        else:
-            status = [255, self.mock_status, 0, 0, 0, 1]
-        if randint(0, 1000) == 0:
-            status = [255, self.mock_finish, 0, 0, 0, 1]
-        time.sleep(0.01)
-        return status
-
-    def get_chip_version(self):
-        """
-        Gets the version of the CH341 chip being used.
-        @return: version. Eg. 48.
-        """
-        if not self.is_connected():
-            raise ConnectionError
-        return 999  # MOCK.
+# MIT License.
+import random
+import time
+
+
+class MockCH341Driver:
+    """
+    This is basic interface code for a mock CH341.
+    """
+
+    def __init__(self, channel=None, state=None, bulk=True):
+        self.driver_index = None
+        self.driver_value = None
+        self.channel = channel
+        self.state = state
+        self.bulk = bulk
+
+        self.mock_status = 206
+        self.mock_error = 207
+        self.mock_finish = 236
+
+        self._start_time_status = None
+        self._end_time_status = None
+        self._time_status = None
+
+    def is_connected(self):
+        return self.driver_value != -1 and self.driver_index is not None
+
+    @property
+    def driver_name(self):
+        return "Mock"
+
+    @property
+    def address(self):
+        return None
+
+    @property
+    def bus(self):
+        return None
+
+    def open(self, usb_index):
+        """
+        Opens the driver for unknown criteria.
+        """
+        _ = self.channel._
+        self.channel(_("Using Mock Driver."))
+
+        if self.driver_value is None:
+            self.channel(_("Using Mock Driver to connect."))
+            self.channel(_("Attempting connection to USB."))
+            self.state("STATE_USB_CONNECTING")
+            self.driver_value = 0  # Would connect here.
+            self.driver_index = usb_index
+            self.state("STATE_USB_CONNECTED")
+            self.channel(_("USB Connected."))
+            self.channel(_("Sending CH341 mode change to EPP1.9."))
+            try:
+                # self.driver.CH341InitParallel(self.driver_index, 1)
+                self.channel(_("CH341 mode change to EPP1.9: Success."))
+            except ConnectionError as e:
+                self.channel(str(e))
+                self.channel(_("CH341 mode change to EPP1.9: Fail."))
+                raise ConnectionRefusedError
+                # self.driver.CH341CloseDevice(self.driver_index)
+            # self.driver.CH341SetExclusive(self.driver_index, 1)
+            self.channel(_("Device Connected.\n"))
+
+    def close(self):
+        """
+        Closes the driver for the stated device index.
+        """
+        _ = self.channel._
+        self.driver_value = None
+        self.state("STATE_USB_SET_DISCONNECTING")
+        self.channel(_("Attempting disconnection from USB."))
+        if self.driver_value == -1:
+            self.channel(_("USB connection did not exist."))
+            raise ConnectionError
+        # self.driver.CH341CloseDevice(self.driver_index)
+        self.state("STATE_USB_DISCONNECTED")
+        self.channel(_("USB Disconnection Successful.\n"))
+
+    def reset(self):
+        pass
+
+    def release(self):
+        pass
+
+    def write(self, packet):
+        """
+        Writes a 32 byte packet to the device. This is typically \x00 + 30 bytes + CRC
+        The driver will packetize the \0xA6 writes.
+
+        @param packet: 32 bytes of data to be written to the CH341.
+        @return:
+        """
+        if not self.is_connected():
+            raise ConnectionError
+        if packet.startswith(b"\x00A"):
+            self._start_time_status = time.time()
+            self._end_time_status = self._start_time_status + 0.5
+            self._time_status = 204
+        if random.randint(0, 5000) == 0:
+            # Write failed.
+            raise ConnectionError
+        time.sleep(0.04)
+        # Mock
+
+    def write_addr(self, packet):
+        """
+        Writes an address byte packet to the device. This is typically 1 byte
+        The driver will packetize the \0xA7 writes.
+
+        @param packet: 1 byte of data to be written to the CH341.
+        @return:
+        """
+        if not self.is_connected():
+            raise ConnectionError
+        time.sleep(0.04)
+        # Mock.
+
+    def get_status(self):
+        """
+        Gets the status bytes from the CH341. This is usually 255 for the D0-D7 values
+        And the state flags for the chip signals. Importantly are WAIT which means do not
+        send data, and ERR which means the data sent was faulty. And PEMP which means the
+        buffer is empty.
+
+        StateBitERR      0x00000100
+        StateBitPEMP   0x00000200
+        StateBitINT      0x00000400
+        StateBitSLCT   0x00000800
+        StateBitWAIT   0x00002000
+        StateBitDATAS   0x00004000
+        StateBitADDRS   0x00008000
+        StateBitRESET   0x00010000
+        StateBitWRITE   0x00020000
+        StateBitSCL       0x00400000
+        StateBitSDA      0x00800000
+        @return:
+        """
+        if not self.is_connected():
+            raise ConnectionError
+        if self._start_time_status is not None:
+            if self._start_time_status <= time.time() <= self._end_time_status:
+                return [255, self._time_status, 0, 0, 0, 1]
+            if self._end_time_status >= time.time():
+                self._start_time_status = None
+                self._end_time_status = None
+                self._time_status = None
+
+        # Mock
+        from random import randint
+
+        if randint(0, 500) == 0:
+            status = [255, self.mock_error, 0, 0, 0, 1]
+        else:
+            status = [255, self.mock_status, 0, 0, 0, 1]
+        if randint(0, 1000) == 0:
+            status = [255, self.mock_finish, 0, 0, 0, 1]
+        time.sleep(0.01)
+        return status
+
+    def get_chip_version(self):
+        """
+        Gets the version of the CH341 chip being used.
+        @return: version. E.g. 48.
+        """
+        if not self.is_connected():
+            raise ConnectionError
+        return 999  # MOCK.

meerk40t/ch341/windriver.py

@@ -1,157 +1,157 @@
-from meerk40t.ch341.ch341device import CH341Device
-from meerk40t.ch341.libusb import mCH341_PARA_CMD_STS
-
-# MIT License.
-
-
-class WinCH341Driver:
-    """
-    This is basic interface code for a CH341 to be run in EPP 1.9 mode.
-    """
-
-    def __init__(self, channel=None, state=None, bulk=True):
-        self.driver_index = None
-        self.channel = channel
-        self.state = state
-        self.bulk = bulk
-        self.driver = None
-
-    def is_connected(self):
-        return self.driver is not None
-
-    @property
-    def driver_name(self):
-        return "WinDll"
-
-    @property
-    def address(self):
-        return None
-
-    @property
-    def bus(self):
-        return None
-
-    def open(self, usb_index):
-        """
-        Opens the driver for unknown criteria.
-        """
-        _ = self.channel._
-        if self.driver is not None:
-            return
-        self.channel(_("Using CH341 Driver to connect."))
-        self.channel(_("Attempting connection to USB."))
-        self.state("STATE_USB_CONNECTING")
-        devices = list(CH341Device.enumerate_devices())
-        if not devices:
-            self.channel(_("No CH341 Devices detected.\n"))
-            self.state("STATE_CONNECTION_FAILED")
-            raise IndexError  # No more devices.
-        if usb_index >= len(devices):
-            self.channel(_("Connection to USB failed.\n"))
-            self.state("STATE_CONNECTION_FAILED")
-            raise IndexError  # No more devices.
-        self.driver = devices[usb_index]
-        self.driver.open()
-        self.driver_index = usb_index
-        self.state("STATE_USB_CONNECTED")
-        self.channel(_("USB Connected."))
-        self.channel(_("Sending CH341 mode change to EPP1.9."))
-        success = self.driver.CH341InitParallel(1)
-        if success:
-            self.channel(_("CH341 mode change to EPP1.9: Success."))
-        else:
-            self.channel(_("CH341 mode change to EPP1.9: Fail."))
-            self.driver.close()
-            raise ConnectionRefusedError
-        self.channel(_("Device Connected.\n"))
-
-    def close(self):
-        """
-        Closes the driver for the stated device index.
-        """
-        _ = self.channel._
-        if self.driver is None:
-            self.channel(_("USB connection did not exist."))
-            return
-        self.state("STATE_USB_SET_DISCONNECTING")
-        self.channel(_("Attempting disconnection from USB."))
-        self.driver.close()
-        self.state("STATE_USB_DISCONNECTED")
-        self.channel(_("USB Disconnection Successful.\n"))
-        self.driver_index = None
-
-    def reset(self):
-        _ = self.channel._
-        self.channel(_("USB connection reset."))
-        self.driver.CH341ResetDevice()
-
-    def release(self):
-        pass
-
-    def write(self, packet):
-        """
-        Writes a 32 byte packet to the device. This is typically \x00 + 30 bytes + CRC
-        The driver will packetize the \0xA6 writes.
-
-        @param packet: 32 bytes of data to be written to the CH341.
-        @return:
-        """
-        if not self.is_connected():
-            raise ConnectionError("Not connected.")
-        success = self.driver.CH341EppWriteData(packet)
-        if not success:
-            raise ConnectionError("Failed to write to CH341:Windll.")
-
-    def write_addr(self, packet):
-        """
-        Writes an address byte packet to the device. This is typically 1 byte
-        The driver will packetize the \0xA7 writes.
-
-        @param packet: 1 byte of data to be written to the CH341.
-        @return:
-        """
-        if not self.is_connected():
-            raise ConnectionError("Not connected.")
-        success = self.driver.CH341EppWriteAddr(packet)
-        if not success:
-            raise ConnectionError("Failed to write to CH341:Windll.")
-
-    def get_status(self):
-        """
-        Gets the status bytes from the CH341. This is usually 255 for the D0-D7 values
-        And the state flags for the chip signals. Importantly are WAIT which means do not
-        send data, and ERR which means the data sent was faulty. And PEMP which means the
-        buffer is empty.
-
-        StateBitERR     0x00000100
-        StateBitPEMP    0x00000200
-        StateBitINT     0x00000400
-        StateBitSLCT    0x00000800
-        StateBitWAIT    0x00002000
-        StateBitDATAS   0x00004000
-        StateBitADDRS   0x00008000
-        StateBitRESET   0x00010000
-        StateBitWRITE   0x00020000
-        StateBitSCL     0x00400000
-        StateBitSDA     0x00800000
-        @return:
-        """
-        if not self.is_connected():
-            raise ConnectionRefusedError("Not connected.")
-        if self.bulk:
-            write_buffer = bytes([mCH341_PARA_CMD_STS])
-            self.driver.CH341WriteData(write_buffer)
-            data = self.driver.CH341ReadData(8)
-            if len(data) != 0:
-                return data
-            return [0] * 6
-        return self.driver.CH341GetStatus()
-
-    def get_chip_version(self):
-        """
-        Gets the version of the CH341 chip being used.
-        @return: version. Eg. 48.
-        """
-        if not self.is_connected():
-            raise ConnectionRefusedError
-        return self.driver.CH341GetVerIC()
+from meerk40t.ch341.ch341device import CH341Device
+from meerk40t.ch341.libusb import mCH341_PARA_CMD_STS
+
+# MIT License.
+
+
+class WinCH341Driver:
+    """
+    This is basic interface code for a CH341 to be run in EPP 1.9 mode.
+    """
+
+    def __init__(self, channel=None, state=None, bulk=True):
+        self.driver_index = None
+        self.channel = channel
+        self.state = state
+        self.bulk = bulk
+        self.driver = None
+
+    def is_connected(self):
+        return self.driver is not None
+
+    @property
+    def driver_name(self):
+        return "WinDll"
+
+    @property
+    def address(self):
+        return None
+
+    @property
+    def bus(self):
+        return None
+
+    def open(self, usb_index):
+        """
+        Opens the driver for unknown criteria.
+        """
+        _ = self.channel._
+        if self.driver is not None:
+            return
+        self.channel(_("Using CH341 Driver to connect."))
+        self.channel(_("Attempting connection to USB."))
+        self.state("STATE_USB_CONNECTING")
+        devices = list(CH341Device.enumerate_devices())
+        if not devices:
+            self.channel(_("No CH341 Devices detected.\n"))
+            self.state("STATE_CONNECTION_FAILED")
+            raise IndexError  # No more devices.
+        if usb_index >= len(devices):
+            self.channel(_("Connection to USB failed.\n"))
+            self.state("STATE_CONNECTION_FAILED")
+            raise IndexError  # No more devices.
+        self.driver = devices[usb_index]
+        self.driver.open()
+        self.driver_index = usb_index
+        self.state("STATE_USB_CONNECTED")
+        self.channel(_("USB Connected."))
+        self.channel(_("Sending CH341 mode change to EPP1.9."))
+        success = self.driver.CH341InitParallel(1)
+        if success:
+            self.channel(_("CH341 mode change to EPP1.9: Success."))
+        else:
+            self.channel(_("CH341 mode change to EPP1.9: Fail."))
+            self.driver.close()
+            raise ConnectionRefusedError
+        self.channel(_("Device Connected.\n"))
+
+    def close(self):
+        """
+        Closes the driver for the stated device index.
+        """
+        _ = self.channel._
+        if self.driver is None:
+            self.channel(_("USB connection did not exist."))
+            return
+        self.state("STATE_USB_SET_DISCONNECTING")
+        self.channel(_("Attempting disconnection from USB."))
+        self.driver.close()
+        self.state("STATE_USB_DISCONNECTED")
+        self.channel(_("USB Disconnection Successful.\n"))
+        self.driver_index = None
+
+    def reset(self):
+        _ = self.channel._
+        self.channel(_("USB connection reset."))
+        self.driver.CH341ResetDevice()
+
+    def release(self):
+        pass
+
+    def write(self, packet):
+        """
+        Writes a 32 byte packet to the device. This is typically \x00 + 30 bytes + CRC
+        The driver will packetize the \0xA6 writes.
+
+        @param packet: 32 bytes of data to be written to the CH341.
+        @return:
+        """
+        if not self.is_connected():
+            raise ConnectionError("Not connected.")
+        success = self.driver.CH341EppWriteData(packet)
+        if not success:
+            raise ConnectionError("Failed to write to CH341:Windll.")
+
+    def write_addr(self, packet):
+        """
+        Writes an address byte packet to the device. This is typically 1 byte
+        The driver will packetize the \0xA7 writes.
+
+        @param packet: 1 byte of data to be written to the CH341.
+        @return:
+        """
+        if not self.is_connected():
+            raise ConnectionError("Not connected.")
+        success = self.driver.CH341EppWriteAddr(packet)
+        if not success:
+            raise ConnectionError("Failed to write to CH341:Windll.")
+
+    def get_status(self):
+        """
+        Gets the status bytes from the CH341. This is usually 255 for the D0-D7 values
+        And the state flags for the chip signals. Importantly are WAIT which means do not
+        send data, and ERR which means the data sent was faulty. And PEMP which means the
+        buffer is empty.
+
+        StateBitERR     0x00000100
+        StateBitPEMP    0x00000200
+        StateBitINT     0x00000400
+        StateBitSLCT    0x00000800
+        StateBitWAIT    0x00002000
+        StateBitDATAS   0x00004000
+        StateBitADDRS   0x00008000
+        StateBitRESET   0x00010000
+        StateBitWRITE   0x00020000
+        StateBitSCL     0x00400000
+        StateBitSDA     0x00800000
+        @return:
+        """
+        if not self.is_connected():
+            raise ConnectionRefusedError("Not connected.")
+        if self.bulk:
+            write_buffer = bytes([mCH341_PARA_CMD_STS])
+            self.driver.CH341WriteData(write_buffer)
+            data = self.driver.CH341ReadData(8)
+            if len(data) != 0:
+                return data
+            return [0] * 6
+        return self.driver.CH341GetStatus()
+
+    def get_chip_version(self):
+        """
+        Gets the version of the CH341 chip being used.
+        @return: version. E.g. 48.
+        """
+        if not self.is_connected():
+            raise ConnectionRefusedError
+        return self.driver.CH341GetVerIC()

meerk40t/constants.py

@@ -0,0 +1,13 @@
+"""
+Definition of commonly used constants
+"""
+
+RASTER_T2B = 0
+RASTER_B2T = 1
+RASTER_R2L = 2
+RASTER_L2R = 3
+RASTER_HATCH = 4
+RASTER_GREEDY_H = 5
+RASTER_GREEDY_V = 6
+RASTER_CROSSOVER = 7
+RASTER_SPIRAL = 8

meerk40t/core/__init__.py

@@ -1 +1 @@
-name = "core"
+name = "core"