homeassistant 2025.10.1__py3-none-any.whl → 2025.10.3__py3-none-any.whl

homeassistant/components/sfr_box/strings.json

@@ -27,7 +27,7 @@
           "host": "[%key:common::config_flow::data::host%]"
         },
         "data_description": {
-          "host": "The hostname, IP address, or full URL of your SFR device. e.g.: '192.168.1.1' or 'https://sfrbox.example.com'"
+          "host": "The hostname, IP address, or full URL of your SFR device. e.g.: `{sample_ip}` or `{sample_url}`"
         },
         "description": "Setting the credentials is optional, but enables additional functionality."
       }

homeassistant/components/sfr_box/translations/cs.json

@@ -27,7 +27,7 @@
                     "host": "Hostitel"
                 },
                 "data_description": {
-                    "host": "N\u00e1zev hostitele, IP adresa nebo \u00fapln\u00e1 URL adresa va\u0161eho za\u0159\u00edzen\u00ed SFR. Nap\u0159.: \"192.168.1.1\" nebo \"https://sfrbox.example.com\""
+                    "host": "N\u00e1zev hostitele, IP adresa nebo \u00fapln\u00e1 URL adresa va\u0161eho SFR za\u0159\u00edzen\u00ed. Nap\u0159.: \"{sample_ip}\" nebo \"{sample_url}\""
                 },
                 "description": "Nastaven\u00ed p\u0159ihla\u0161ovac\u00edch \u00fadaj\u016f je voliteln\u00e9, ale umo\u017e\u0148uje dal\u0161\u00ed funkce."
             }

homeassistant/components/sfr_box/translations/de.json

@@ -27,7 +27,7 @@
                     "host": "Host"
                 },
                 "data_description": {
-                    "host": "Der Hostname, die IP-Adresse oder die vollst\u00e4ndige URL deines SFR-Ger\u00e4ts. Beispiel: \u201e192.168.1.1\u201c oder \u201ehttps://sfrbox.example.com\u201c"
+                    "host": "Der Hostname, die IP-Adresse oder die vollst\u00e4ndige URL deines SFR-Ger\u00e4ts. Beispiel: `{sample_ip}` oder `{sample_url}`"
                 },
                 "description": "Die Angabe der Anmeldedaten ist optional, erm\u00f6glicht aber zus\u00e4tzliche Funktionen."
             }

homeassistant/components/sfr_box/translations/el.json

@@ -26,9 +26,6 @@
                 "data": {
                     "host": "\u039a\u03b5\u03bd\u03c4\u03c1\u03b9\u03ba\u03cc\u03c2 \u03c5\u03c0\u03bf\u03bb\u03bf\u03b3\u03b9\u03c3\u03c4\u03ae\u03c2"
                 },
-                "data_description": {
-                    "host": "\u03a4\u03bf \u03cc\u03bd\u03bf\u03bc\u03b1 \u03ba\u03b5\u03bd\u03c4\u03c1\u03b9\u03ba\u03bf\u03cd \u03c5\u03c0\u03bf\u03bb\u03bf\u03b3\u03b9\u03c3\u03c4\u03ae, \u03b7 \u03b4\u03b9\u03b5\u03cd\u03b8\u03c5\u03bd\u03c3\u03b7 IP \u03ae \u03b7 \u03c0\u03bb\u03ae\u03c1\u03b7\u03c2 \u03b4\u03b9\u03b5\u03cd\u03b8\u03c5\u03bd\u03c3\u03b7 URL \u03c4\u03b7\u03c2 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae\u03c2 SFR \u03c3\u03b1\u03c2, \u03c0.\u03c7.: '192.168.1.1' \u03ae 'https://sfrbox.example.com'."
-                },
                 "description": "\u0397 \u03c1\u03cd\u03b8\u03bc\u03b9\u03c3\u03b7 \u03c4\u03c9\u03bd \u03b4\u03b9\u03b1\u03c0\u03b9\u03c3\u03c4\u03b5\u03c5\u03c4\u03b7\u03c1\u03af\u03c9\u03bd \u03b5\u03af\u03bd\u03b1\u03b9 \u03c0\u03c1\u03bf\u03b1\u03b9\u03c1\u03b5\u03c4\u03b9\u03ba\u03ae, \u03b1\u03bb\u03bb\u03ac \u03b5\u03c0\u03b9\u03c4\u03c1\u03ad\u03c0\u03b5\u03b9 \u03c0\u03c1\u03cc\u03c3\u03b8\u03b5\u03c4\u03b5\u03c2 \u03bb\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b5\u03c2."
             }
         }

homeassistant/components/sfr_box/translations/en-GB.json

@@ -27,7 +27,7 @@
                     "host": "Host"
                 },
                 "data_description": {
-                    "host": "The hostname, IP address, or full URL of your SFR device. e.g.: '192.168.1.1' or 'https://sfrbox.example.com'"
+                    "host": "The hostname, IP address, or full URL of your SFR device. e.g.: `{sample_ip}` or `{sample_url}`"
                 },
                 "description": "Setting the credentials is optional, but enables additional functionality."
             }

homeassistant/components/sfr_box/translations/en.json

@@ -27,7 +27,7 @@
                     "host": "Host"
                 },
                 "data_description": {
-                    "host": "The hostname, IP address, or full URL of your SFR device. e.g.: '192.168.1.1' or 'https://sfrbox.example.com'"
+                    "host": "The hostname, IP address, or full URL of your SFR device. e.g.: `{sample_ip}` or `{sample_url}`"
                 },
                 "description": "Setting the credentials is optional, but enables additional functionality."
             }

homeassistant/components/sfr_box/translations/es.json

@@ -26,9 +26,6 @@
                 "data": {
                     "host": "Host"
                 },
-                "data_description": {
-                    "host": "El nombre de host, la direcci\u00f3n IP o la URL completa de tu dispositivo SFR, por ejemplo: '192.168.1.1' o 'https://sfrbox.example.com'"
-                },
                 "description": "La configuraci\u00f3n de las credenciales es opcional, pero habilita funciones adicionales."
             }
         }

homeassistant/components/sfr_box/translations/et.json

@@ -26,9 +26,6 @@
                 "data": {
                     "host": "Host"
                 },
-                "data_description": {
-                    "host": "SFR-seadme hostinimi, IP-aadress v\u00f5i t\u00e4ielik URL, nt: \"192.168.1.1\" v\u00f5i \"https://sfrbox.example.com\"."
-                },
                 "description": "Mandaadi m\u00e4\u00e4ramine on valikuline kuid lubab lisafunktsioone."
             }
         }

homeassistant/components/sfr_box/translations/ga.json

@@ -26,9 +26,6 @@
                 "data": {
                     "host": "\u00d3stach"
                 },
-                "data_description": {
-                    "host": "Ainm an \u00f3staigh, seoladh IP, n\u00f3 URL ioml\u00e1n do ghl\u00e9is SFR. m.sh.: '192.168.1.1' n\u00f3 'https://sfrbox.example.com'"
-                },
                 "description": "Is rogha \u00e9 na dinti\u00fair a shocr\u00fa, ach cuireann s\u00e9 feidhmi\u00falacht bhreise ar f\u00e1il."
             }
         }

homeassistant/components/sfr_box/translations/it.json

@@ -26,9 +26,6 @@
                 "data": {
                     "host": "Host"
                 },
-                "data_description": {
-                    "host": "Il nome host, l'indirizzo IP o l'URL completo del tuo dispositivo SFR. Ad esempio: '192.168.1.1' o 'https://sfrbox.example.com'"
-                },
                 "description": "L'impostazione delle credenziali \u00e8 facoltativa, ma abilita funzionalit\u00e0 aggiuntive."
             }
         }

homeassistant/components/sfr_box/translations/lt.json

@@ -26,9 +26,6 @@
                 "data": {
                     "host": "Host"
                 },
-                "data_description": {
-                    "host": "J\u016bs\u0173 SFR \u012frenginio prieglobos vardas, IP adresas arba visas URL, pvz.: '192.168.1.1.1' arba 'https://sfrbox.example.com'."
-                },
                 "description": "Kredencial\u0173 nustatymas yra neprivalomas, ta\u010diau \u012fgalinamos papildomos funkcijos."
             }
         }

homeassistant/components/sfr_box/translations/mk.json

@@ -1,13 +1,4 @@
 {
-    "config": {
-        "step": {
-            "user": {
-                "data_description": {
-                    "host": "\u0418\u043c\u0435\u0442\u043e \u043d\u0430 \u0445\u043e\u0441\u0442\u043e\u0442, IP-\u0430\u0434\u0440\u0435\u0441\u0430\u0442\u0430 \u0438\u043b\u0438 \u0446\u0435\u043b\u043e\u0441\u043d\u0430\u0442\u0430 URL-\u0430\u0434\u0440\u0435\u0441\u0430 \u043d\u0430 \u0432\u0430\u0448\u0438\u043e\u0442 SFR \u0443\u0440\u0435\u0434. \u043d\u0430 \u043f\u0440.: \u201e192.168.1.1\u201c \u0438\u043b\u0438 \u201ehttps://sfrbox.example.com\u201c"
-                }
-            }
-        }
-    },
     "entity": {
         "sensor": {
             "dsl_line_status": {

homeassistant/components/sfr_box/translations/pt.json

@@ -27,7 +27,7 @@
                     "host": "Anfitri\u00e3o"
                 },
                 "data_description": {
-                    "host": "O nome do anfitri\u00e3o, o endere\u00e7o IP ou o URL completo do seu dispositivo SFR. Por exemplo: '192.168.1.1' ou 'https://sfrbox.example.com'"
+                    "host": "O nome do anfitri\u00e3o, o endere\u00e7o IP ou o URL completo do seu dispositivo SFR. Por exemplo: `{sample_ip}` ou `{sample_url}`"
                 },
                 "description": "Definir as credenciais \u00e9 opcional mas permite funcionalidades adicionais."
             }

homeassistant/components/sfr_box/translations/ru.json

@@ -26,9 +26,6 @@
                 "data": {
                     "host": "\u0425\u043e\u0441\u0442"
                 },
-                "data_description": {
-                    "host": "\u0418\u043c\u044f \u0445\u043e\u0441\u0442\u0430, IP-\u0430\u0434\u0440\u0435\u0441 \u0438\u043b\u0438 \u043f\u043e\u043b\u043d\u044b\u0439 URL \u0432\u0430\u0448\u0435\u0433\u043e \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0430 SFR, \u043d\u0430\u043f\u0440\u0438\u043c\u0435\u0440: '192.168.1.1' \u0438\u043b\u0438 'https://sfrbox.example.com'"
-                },
                 "description": "\u041d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0430 \u0441 \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u043e\u0432\u0430\u043d\u0438\u0435\u043c \u0443\u0447\u0451\u0442\u043d\u044b\u0445 \u0434\u0430\u043d\u043d\u044b\u0445 \u043d\u0435\u043e\u0431\u044f\u0437\u0430\u0442\u0435\u043b\u044c\u043d\u0430, \u043d\u043e \u043f\u043e\u0437\u0432\u043e\u043b\u044f\u0435\u0442 \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u043e\u0432\u0430\u0442\u044c \u0434\u043e\u043f\u043e\u043b\u043d\u0438\u0442\u0435\u043b\u044c\u043d\u044b\u0435 \u0444\u0443\u043d\u043a\u0446\u0438\u0438."
             }
         }

homeassistant/components/sfr_box/translations/sk.json

@@ -27,7 +27,7 @@
                     "host": "Hostite\u013e"
                 },
                 "data_description": {
-                    "host": "N\u00e1zov hostite\u013ea, IP adresa alebo \u00fapln\u00e1 adresa URL v\u00e1\u0161ho zariadenia SFR, napr.: \"192.168.1.1\" alebo \"https://sfrbox.example.com\"."
+                    "host": "N\u00e1zov hostite\u013ea, IP adresa alebo \u00fapln\u00e1 adresa URL v\u00e1\u0161ho zariadenia SFR: `{sample_ip}` alebo `{sample_url}`"
                 },
                 "description": "Nastavenie poveren\u00ed je volite\u013en\u00e9, ale umo\u017e\u0148uje \u010fal\u0161ie funkcie."
             }

homeassistant/components/sfr_box/translations/sr-Latn.json

@@ -0,0 +1,11 @@
+{
+    "entity": {
+        "sensor": {
+            "dsl_training": {
+                "state": {
+                    "idle": "Mirovanje"
+                }
+            }
+        }
+    }
+}

homeassistant/components/sfr_box/translations/sr.json

@@ -0,0 +1,11 @@
+{
+    "entity": {
+        "sensor": {
+            "dsl_training": {
+                "state": {
+                    "idle": "\u041c\u0438\u0440\u043e\u0432\u0430\u045a\u0435"
+                }
+            }
+        }
+    }
+}

homeassistant/components/sfr_box/translations/zh-Hans.json

@@ -27,7 +27,7 @@
                     "host": "\u4e3b\u673a"
                 },
                 "data_description": {
-                    "host": "\u60a8\u7684 SFR \u8bbe\u5907\u7684\u4e3b\u673a\u540d\u3001IP \u5730\u5740\u6216\u5b8c\u6574\u7f51\u5740\u3002\u4f8b\u5982\uff1a\u201c192.168.1.1\u201d \u6216 \u201chttps://sfrbox.example.com\u201d"
+                    "host": "\u60a8\u7684 SFR \u8bbe\u5907\u7684\u4e3b\u673a\u540d\u3001IP \u5730\u5740\u6216\u5b8c\u6574\u7f51\u5740\u3002\u4f8b\u5982\uff1a\u201c{sample_ip}\u201c \u6216 \u201d{sample_url}\u201c"
                 },
                 "description": "\u8bbe\u7f6e\u51ed\u636e\u662f\u53ef\u9009\u7684\uff0c\u4f46\u4f1a\u542f\u7528\u5176\u4ed6\u529f\u80fd\u3002"
             }

homeassistant/components/sfr_box/translations/zh-Hant.json

@@ -27,7 +27,7 @@
                     "host": "\u4e3b\u6a5f\u7aef"
                 },
                 "data_description": {
-                    "host": "SFR \u88dd\u7f6e\u4e4b\u4e3b\u6a5f\u540d\u7a31\u3001 IP \u4f4d\u5740\u6216\u5b8c\u6574\u7db2\u5740\u3002\u4f8b\u5982\uff1a'192.168.1.1' \u6216 'https://sfrbox.example.com'"
+                    "host": "SFR \u88dd\u7f6e\u4e4b\u4e3b\u6a5f\u540d\u7a31\u3001 IP \u4f4d\u5740\u6216\u5b8c\u6574\u7db2\u5740\u3002\u4f8b\u5982\uff1a`{sample_ip}` \u6216 `{sample_url}`"
                 },
                 "description": "\u8a2d\u5b9a\u6191\u8b49\u70ba\u9078\u9805\u8a2d\u5b9a\u3001\u4f46\u662f\u80fd\u5920\u958b\u555f\u9644\u52a0\u5171\u80fd\u3002"
             }

homeassistant/components/sftp_storage/translations/hu.json

@@ -0,0 +1,14 @@
+{
+    "config": {
+        "step": {
+            "user": {
+                "data": {
+                    "host": "Hoszt",
+                    "password": "Jelsz\u00f3",
+                    "port": "Port",
+                    "username": "Felhaszn\u00e1l\u00f3n\u00e9v"
+                }
+            }
+        }
+    }
+}

homeassistant/components/sharkiq/manifest.json

@@ -6,5 +6,5 @@
   "documentation": "https://www.home-assistant.io/integrations/sharkiq",
   "iot_class": "cloud_polling",
   "loggers": ["sharkiq"],
-  "requirements": ["sharkiq==1.4.0"]
+  "requirements": ["sharkiq==1.4.2"]
 }

homeassistant/components/shelly/binary_sensor.py

@@ -319,7 +319,7 @@ RPC_SENSORS: Final = {
     ),
     "presencezone_state": RpcBinarySensorDescription(
         key="presencezone",
-        sub_key="state",
+        sub_key="value",
         name="Occupancy",
         device_class=BinarySensorDeviceClass.OCCUPANCY,
         entity_class=RpcPresenceBinarySensor,

homeassistant/components/shelly/cover.py

@@ -226,6 +226,8 @@ class RpcShellyCover(ShellyRpcEntity, CoverEntity):
     def _update_callback(self) -> None:
         """Handle device update. Use a task when opening/closing is in progress."""
         super()._update_callback()
+        if not self.coordinator.device.initialized:
+            return
         if self.is_closing or self.is_opening:
             self.launch_update_task()
 

homeassistant/components/shelly/translations/fy.json

@@ -35,7 +35,8 @@
         "sensor": {
             "charger_state": {
                 "state": {
-                    "charger_charging": "Oplade"
+                    "charger_charging": "Oplade",
+                    "charger_free": "Loskeppele"
                 }
             },
             "self_test": {

homeassistant/components/shelly/translations/ga.json

@@ -114,6 +114,18 @@
             }
         },
         "sensor": {
+            "charger_state": {
+                "state": {
+                    "charger_charging": "Muirear\u00fa",
+                    "charger_end": "Muirear cr\u00edochnaithe",
+                    "charger_fault": "Earr\u00e1id agus muirear\u00fa \u00e1 dh\u00e9anamh",
+                    "charger_free": "D\u00edphlug\u00e1ilte",
+                    "charger_free_fault": "N\u00ed f\u00e9idir an breise\u00e1n a scaoileadh",
+                    "charger_insert": "Breise\u00e1ilte isteach",
+                    "charger_pause": "Chuir an luchtaire sos ar an muirear\u00fa",
+                    "charger_wait": "Muirear\u00fa curtha ar sos ag an bhfeithicil"
+                }
+            },
             "detected_objects": {
                 "unit_of_measurement": "ruda\u00ed"
             },

homeassistant/components/shelly/translations/he.json

@@ -87,6 +87,13 @@
             }
         },
         "sensor": {
+            "charger_state": {
+                "state": {
+                    "charger_charging": "\u05d8\u05e2\u05d9\u05e0\u05d4",
+                    "charger_free": "\u05dc\u05d0 \u05de\u05d7\u05d5\u05d1\u05e8",
+                    "charger_insert": "\u05de\u05d7\u05d5\u05d1\u05e8"
+                }
+            },
             "operation": {
                 "state": {
                     "fault": "\u05ea\u05e7\u05dc\u05d4",

homeassistant/components/shelly/translations/hu.json

@@ -114,6 +114,13 @@
             }
         },
         "sensor": {
+            "charger_state": {
+                "state": {
+                    "charger_charging": "T\u00f6lt\u00e9s",
+                    "charger_free": "Kih\u00fazva",
+                    "charger_insert": "Csatlakoztatva"
+                }
+            },
             "gas_detected": {
                 "state": {
                     "heavy": "Er\u0151s",
@@ -230,6 +237,13 @@
             "description": "A Shelly eszk\u00f6z {device_name} IP-c\u00edmmel {ip_address} kalibr\u00e1l\u00e1st ig\u00e9nyel. Az eszk\u00f6z kalibr\u00e1l\u00e1s\u00e1hoz a szelepen t\u00f6rt\u00e9n\u0151 megfelel\u0151 telep\u00edt\u00e9s ut\u00e1n \u00fajra kell ind\u00edtani. Az eszk\u00f6zt a webpanelj\u00e9n \u00fajraind\u00edthatja, menjen a 'Be\u00e1ll\u00edt\u00e1sok' > 'Eszk\u00f6z \u00fajraind\u00edt\u00e1sa' men\u00fcpontra.",
             "title": "A Shelly eszk\u00f6z {device_name} nincs kalibr\u00e1lva"
         },
+        "outbound_websocket_incorrectly_enabled": {
+            "fix_flow": {
+                "abort": {
+                    "cannot_connect": "Sikertelen csatlakoz\u00e1s"
+                }
+            }
+        },
         "push_update_failure": {
             "description": "A Home Assistant nem kap push friss\u00edt\u00e9seket a Shelly eszk\u00f6zt\u0151l {device_name} IP-c\u00edmmel {ip_address}. Ellen\u0151rizze a CoIoT konfigur\u00e1ci\u00f3t az eszk\u00f6z webpanelj\u00e9ben \u00e9s a h\u00e1l\u00f3zati konfigur\u00e1ci\u00f3j\u00e1t.",
             "title": "Shelly eszk\u00f6z {device_name} friss\u00edt\u00e9si hiba"
@@ -237,6 +251,13 @@
         "unsupported_firmware": {
             "description": "A(z) {ip_address} IP-c\u00edm\u0171 {device_name} Shelly-eszk\u00f6z\u00f6n nem t\u00e1mogatott bels\u0151 vez\u00e9rl\u0151program fut. K\u00e9rj\u00fck, friss\u00edtse a firmware-t.\n\nHa az eszk\u00f6z nem k\u00edn\u00e1l friss\u00edt\u00e9st, ellen\u0151rizze az internetkapcsolatot (\u00e1tj\u00e1r\u00f3, DNS, id\u0151), \u00e9s ind\u00edtsa \u00fajra az eszk\u00f6zt.",
             "title": "Nem t\u00e1mogatott firmware a(z) {device_name} eszk\u00f6zh\u00f6z"
+        },
+        "wall_display_firmware_unsupported": {
+            "fix_flow": {
+                "abort": {
+                    "cannot_connect": "Sikertelen csatlakoz\u00e1s"
+                }
+            }
         }
     },
     "options": {

homeassistant/components/shelly/translations/pl.json

@@ -241,7 +241,7 @@
                 },
                 "step": {
                     "confirm": {
-                        "description": "Urz\u0105dzenie Shelly {device_name} o adresie IP {ip_address} korzysta z oprogramowania sprz\u0119towego {firmware} i dzia\u0142a jako skaner BLE w trybie aktywnym. Ta wersja oprogramowania sprz\u0119towego nie jest obs\u0142ugiwana w trybie aktywnym skanera BLE. \n \nWybierz przycisk **Zatwierd\u017a**, aby rozpocz\u0105\u0107 aktualizacj\u0119 OTA do najnowszej stabilnej wersji oprogramowania sprz\u0119towego.",
+                        "description": "Urz\u0105dzenie Shelly {device_name} o adresie IP {ip_address} korzysta z oprogramowania sprz\u0119towego {firmware} i dzia\u0142a jako skaner BLE w trybie aktywnym. Ta wersja oprogramowania sprz\u0119towego nie jest obs\u0142ugiwana w trybie aktywnym skanera BLE. \n \nNaci\u015bnij przycisk **Zatwierd\u017a**, aby rozpocz\u0105\u0107 aktualizacj\u0119 OTA do najnowszej stabilnej wersji oprogramowania sprz\u0119towego.",
                         "title": "{device_name} korzysta z nieobs\u0142ugiwanego oprogramowania sprz\u0119towego"
                     }
                 }
@@ -259,7 +259,7 @@
                 },
                 "step": {
                     "confirm": {
-                        "description": "Urz\u0105dzenie Shelly {device_name} o adresie IP {ip_address} nie jest urz\u0105dzeniem zasilanym bateryjnie i Outbound WebSocket powinno by\u0107 wy\u0142\u0105czona w jego konfiguracji.\n \nWybierz przycisk **Zatwierd\u017a**, aby wy\u0142\u0105czy\u0107 Outbound WebSocket dla tego urz\u0105dzenia.",
+                        "description": "Urz\u0105dzenie Shelly {device_name} o adresie IP {ip_address} nie jest urz\u0105dzeniem zasilanym bateryjnie i Outbound WebSocket powinno by\u0107 wy\u0142\u0105czona w jego konfiguracji.\n \nNaci\u015bnij przycisk **Zatwierd\u017a**, aby wy\u0142\u0105czy\u0107 Outbound WebSocket dla tego urz\u0105dzenia.",
                         "title": "Outbound WebSocket jest w\u0142\u0105czone dla {device_name}"
                     }
                 }
@@ -282,7 +282,7 @@
                 },
                 "step": {
                     "confirm": {
-                        "description": "Urz\u0105dzenie Shelly {device_name} o adresie IP {ip_address} korzysta z oprogramowania sprz\u0119towego {firmware}. Ta wersja oprogramowania uk\u0142adowego nie b\u0119dzie obs\u0142ugiwana przez integracj\u0119 Shelly, pocz\u0105wszy od Home Assistanta 2025.11.0. \n \nWybierz przycisk **Zatwierd\u017a**, aby rozpocz\u0105\u0107 aktualizacj\u0119 OTA do najnowszej stabilnej wersji oprogramowania sprz\u0119towego.",
+                        "description": "Urz\u0105dzenie Shelly {device_name} o adresie IP {ip_address} korzysta z oprogramowania sprz\u0119towego {firmware}. Ta wersja oprogramowania uk\u0142adowego nie b\u0119dzie obs\u0142ugiwana przez integracj\u0119 Shelly, pocz\u0105wszy od Home Assistanta 2025.11.0. \n \nNaci\u015bnij przycisk **Zatwierd\u017a**, aby rozpocz\u0105\u0107 aktualizacj\u0119 OTA do najnowszej stabilnej wersji oprogramowania sprz\u0119towego.",
                         "title": "{device_name} korzysta z przestarza\u0142ego oprogramowania sprz\u0119towego"
                     }
                 }

homeassistant/components/shelly/translations/ru.json

@@ -114,6 +114,12 @@
             }
         },
         "sensor": {
+            "charger_state": {
+                "state": {
+                    "charger_free": "\u041e\u0442\u043a\u043b\u044e\u0447\u0435\u043d\u043e",
+                    "charger_insert": "\u041f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u043e"
+                }
+            },
             "gas_detected": {
                 "state": {
                     "heavy": "\u041e\u0431\u0438\u043b\u044c\u043d\u0430\u044f",

homeassistant/components/shelly/translations/sv.json

@@ -114,6 +114,13 @@
             }
         },
         "sensor": {
+            "charger_state": {
+                "state": {
+                    "charger_charging": "Laddar",
+                    "charger_free": "Urkopplad",
+                    "charger_insert": "Inkopplad"
+                }
+            },
             "gas_detected": {
                 "state": {
                     "heavy": "Kraftig",

homeassistant/components/shelly/utils.py

@@ -692,27 +692,25 @@ def async_remove_orphaned_entities(
     """Remove orphaned entities."""
     orphaned_entities = []
     entity_reg = er.async_get(hass)
-    device_reg = dr.async_get(hass)
 
-    if not (
-        devices := device_reg.devices.get_devices_for_config_entry_id(config_entry_id)
-    ):
-        return
+    entities = er.async_entries_for_config_entry(entity_reg, config_entry_id)
+    for entity in entities:
+        if not entity.entity_id.startswith(platform):
+            continue
+        if key_suffix is not None and key_suffix not in entity.unique_id:
+            continue
+        # we are looking for the component ID, e.g. boolean:201, em1data:1
+        if not (match := COMPONENT_ID_PATTERN.search(entity.unique_id)):
+            continue
 
-    for device in devices:
-        entities = er.async_entries_for_device(entity_reg, device.id, True)
-        for entity in entities:
-            if not entity.entity_id.startswith(platform):
-                continue
-            if key_suffix is not None and key_suffix not in entity.unique_id:
-                continue
-            # we are looking for the component ID, e.g. boolean:201, em1data:1
-            if not (match := COMPONENT_ID_PATTERN.search(entity.unique_id)):
-                continue
-
-            key = match.group()
-            if key not in keys:
-                orphaned_entities.append(entity.unique_id.split("-", 1)[1])
+        key = match.group()
+        if key not in keys:
+            LOGGER.debug(
+                "Found orphaned Shelly entity: %s, unique id: %s",
+                entity.entity_id,
+                entity.unique_id,
+            )
+            orphaned_entities.append(entity.unique_id.split("-", 1)[1])
 
     if orphaned_entities:
         async_remove_shelly_rpc_entities(hass, platform, mac, orphaned_entities)

homeassistant/components/simplisafe/__init__.py

@@ -100,8 +100,9 @@ ATTR_PIN_VALUE = "pin"
 ATTR_TIMESTAMP = "timestamp"
 
 DEFAULT_SCAN_INTERVAL = timedelta(seconds=30)
-DEFAULT_SOCKET_MIN_RETRY = 15
 
+WEBSOCKET_RECONNECT_RETRIES = 3
+WEBSOCKET_RETRY_DELAY = 2
 
 EVENT_SIMPLISAFE_EVENT = "SIMPLISAFE_EVENT"
 EVENT_SIMPLISAFE_NOTIFICATION = "SIMPLISAFE_NOTIFICATION"
@@ -419,6 +420,7 @@ class SimpliSafe:
         self._api = api
         self._hass = hass
         self._system_notifications: dict[int, set[SystemNotification]] = {}
+        self._websocket_reconnect_retries: int = 0
         self._websocket_reconnect_task: asyncio.Task | None = None
         self.entry = entry
         self.initial_event_to_use: dict[int, dict[str, Any]] = {}
@@ -469,6 +471,8 @@ class SimpliSafe:
         """Start a websocket reconnection loop."""
         assert self._api.websocket
 
+        self._websocket_reconnect_retries += 1
+
         try:
             await self._api.websocket.async_connect()
             await self._api.websocket.async_listen()
@@ -479,9 +483,21 @@ class SimpliSafe:
             LOGGER.error("Failed to connect to websocket: %s", err)
         except Exception as err:  # noqa: BLE001
             LOGGER.error("Unknown exception while connecting to websocket: %s", err)
+        else:
+            self._websocket_reconnect_retries = 0
 
-        LOGGER.debug("Reconnecting to websocket")
-        await self._async_cancel_websocket_loop()
+        if self._websocket_reconnect_retries >= WEBSOCKET_RECONNECT_RETRIES:
+            LOGGER.error("Max websocket connection retries exceeded")
+            return
+
+        delay = WEBSOCKET_RETRY_DELAY * (2 ** (self._websocket_reconnect_retries - 1))
+        LOGGER.info(
+            "Retrying websocket connection in %s seconds (attempt %s/%s)",
+            delay,
+            self._websocket_reconnect_retries,
+            WEBSOCKET_RECONNECT_RETRIES,
+        )
+        await asyncio.sleep(delay)
         self._websocket_reconnect_task = self._hass.async_create_task(
             self._async_start_websocket_loop()
         )

homeassistant/components/simplisafe/translations/fr.json

@@ -8,6 +8,7 @@
         "error": {
             "identifier_exists": "Compte d\u00e9j\u00e0 enregistr\u00e9",
             "invalid_auth": "Authentification non valide",
+            "invalid_auth_code_length": "Les codes d'autorisation SimpliSafe ont une longueur de 45 caract\u00e8res",
             "unknown": "Erreur inattendue"
         },
         "step": {

homeassistant/components/siren/translations/fy.json

@@ -0,0 +1,3 @@
+{
+    "title": "Sirene"
+}

homeassistant/components/slack/translations/el.json

@@ -12,12 +12,14 @@
             "user": {
                 "data": {
                     "api_key": "\u039a\u03bb\u03b5\u03b9\u03b4\u03af API",
+                    "default_channel": "\u03a0\u03c1\u03bf\u03b5\u03c0\u03b9\u03bb\u03b5\u03b3\u03bc\u03ad\u03bd\u03bf \u03ba\u03b1\u03bd\u03ac\u03bb\u03b9",
                     "icon": "\u0395\u03b9\u03ba\u03bf\u03bd\u03af\u03b4\u03b9\u03bf",
                     "username": "\u039f\u03bd\u03bf\u03bc\u03b1 \u03c7\u03c1\u03ae\u03c3\u03c4\u03b7"
                 },
                 "data_description": {
                     "api_key": "\u03a4\u03bf Slack API token \u03b3\u03b9\u03b1 \u03c7\u03c1\u03ae\u03c3\u03b7 \u03b3\u03b9\u03b1 \u03c4\u03b7\u03bd \u03b1\u03c0\u03bf\u03c3\u03c4\u03bf\u03bb\u03ae \u03bc\u03b7\u03bd\u03c5\u03bc\u03ac\u03c4\u03c9\u03bd Slack.",
                     "default_channel": "\u03a4\u03bf \u03ba\u03b1\u03bd\u03ac\u03bb\u03b9 \u03c3\u03c4\u03bf \u03bf\u03c0\u03bf\u03af\u03bf \u03b8\u03b1 \u03b4\u03b7\u03bc\u03bf\u03c3\u03b9\u03b5\u03cd\u03c3\u03b5\u03c4\u03b5 \u03b1\u03bd \u03b4\u03b5\u03bd \u03ad\u03c7\u03b5\u03b9 \u03ba\u03b1\u03b8\u03bf\u03c1\u03b9\u03c3\u03c4\u03b5\u03af \u03ba\u03b1\u03bd\u03ac\u03bb\u03b9 \u03ba\u03b1\u03c4\u03ac \u03c4\u03b7\u03bd \u03b1\u03c0\u03bf\u03c3\u03c4\u03bf\u03bb\u03ae \u03b5\u03bd\u03cc\u03c2 \u03bc\u03b7\u03bd\u03cd\u03bc\u03b1\u03c4\u03bf\u03c2.",
+                    "icon": "\u03a7\u03c1\u03b7\u03c3\u03b9\u03bc\u03bf\u03c0\u03bf\u03b9\u03ae\u03c3\u03c4\u03b5 \u03ad\u03bd\u03b1 \u03b1\u03c0\u03cc \u03c4\u03b1 Slack emoji \u03c9\u03c2 \u03b5\u03b9\u03ba\u03bf\u03bd\u03af\u03b4\u03b9\u03bf \u03b3\u03b9\u03b1 \u03c4\u03bf \u03c0\u03b1\u03c1\u03b5\u03c7\u03cc\u03bc\u03b5\u03bd\u03bf \u03cc\u03bd\u03bf\u03bc\u03b1 \u03c7\u03c1\u03ae\u03c3\u03c4\u03b7.",
                     "username": "\u03a4\u03bf Home Assistant \u03b8\u03b1 \u03b4\u03b7\u03bc\u03bf\u03c3\u03b9\u03b5\u03cd\u03b5\u03b9 \u03c3\u03c4\u03bf Slack \u03c7\u03c1\u03b7\u03c3\u03b9\u03bc\u03bf\u03c0\u03bf\u03b9\u03ce\u03bd\u03c4\u03b1\u03c2 \u03c4\u03bf \u03ba\u03b1\u03b8\u03bf\u03c1\u03b9\u03c3\u03bc\u03ad\u03bd\u03bf \u03cc\u03bd\u03bf\u03bc\u03b1 \u03c7\u03c1\u03ae\u03c3\u03c4\u03b7."
                 },
                 "description": "\u0391\u03bd\u03b1\u03c4\u03c1\u03ad\u03be\u03c4\u03b5 \u03c3\u03c4\u03b7\u03bd \u03c4\u03b5\u03ba\u03bc\u03b7\u03c1\u03af\u03c9\u03c3\u03b7 \u03b3\u03b9\u03b1 \u03c4\u03b7 \u03bb\u03ae\u03c8\u03b7 \u03c4\u03bf\u03c5 \u03ba\u03bb\u03b5\u03b9\u03b4\u03b9\u03bf\u03cd Slack API."

homeassistant/components/slack/translations/es.json

@@ -12,12 +12,14 @@
             "user": {
                 "data": {
                     "api_key": "Clave API",
+                    "default_channel": "Canal por defecto",
                     "icon": "Icono",
                     "username": "Nombre de usuario"
                 },
                 "data_description": {
                     "api_key": "El token de la API de Slack que se usar\u00e1 para enviar mensajes de Slack.",
                     "default_channel": "Canal al que publicar en caso de que no se especifique ning\u00fan canal al enviar un mensaje.",
+                    "icon": "Utiliza uno de los emojis de Slack como \u00edcono para el nombre de usuario proporcionado.",
                     "username": "Home Assistant publicar\u00e1 en Slack con el nombre de usuario especificado."
                 },
                 "description": "Consulta la documentaci\u00f3n sobre c\u00f3mo obtener tu clave API de Slack."

homeassistant/components/slack/translations/et.json

@@ -12,12 +12,14 @@
             "user": {
                 "data": {
                     "api_key": "API v\u00f5ti",
+                    "default_channel": "Vaikimisi kanal",
                     "icon": "Ikoon",
                     "username": "Kasutajanimi"
                 },
                 "data_description": {
                     "api_key": "Slacki API v\u00f5ti mida kasutatakse Slacki s\u00f5numite saatmiseks.",
                     "default_channel": "Kanal, kuhu postitada kui s\u00f5numi saatmisel ei ole kanalit m\u00e4\u00e4ratud.",
+                    "icon": "Kasuta \u00fchte Slacki emotikoni esitatud kasutajanime ikoonina.",
                     "username": "Home Assistant postitab Slacki kasutades m\u00e4\u00e4ratud kasutajanime."
                 },
                 "description": "Vaata oma Slack API v\u00f5tme hankimise dokumentatsiooni."

homeassistant/components/slack/translations/lt.json

@@ -12,12 +12,14 @@
             "user": {
                 "data": {
                     "api_key": "API raktas",
+                    "default_channel": "Numatytasis kanalas",
                     "icon": "Piktograma",
                     "username": "Naudotojo vardas"
                 },
                 "data_description": {
                     "api_key": "Slack API prieigos raktas, naudojamas Slack prane\u0161imams si\u0173sti.",
                     "default_channel": "Kanalas, kuriuo norite skelbti, jei siun\u010diant prane\u0161im\u0105 nenurodytas joks kanalas.",
+                    "icon": "Naudokite vien\u0105 i\u0161 Slack jaustuk\u0173 kaip pateikto vartotojo vardo piktogram\u0105.",
                     "username": "\u201eHome Assistant\u201c paskelbs \u201eSlack\u201c naudodamas nurodyt\u0105 naudotojo vard\u0105."
                 },
                 "description": "\u017di\u016br\u0117kite \"Slack\" API rakto gavimo dokumentacij\u0105."

homeassistant/components/slack/translations/pt.json

@@ -12,12 +12,14 @@
             "user": {
                 "data": {
                     "api_key": "Chave da API",
+                    "default_channel": "Canal predefinido",
                     "icon": "\u00cdcone",
                     "username": "Nome de Utilizador"
                 },
                 "data_description": {
                     "api_key": "O token da API do Slack a ser usado para enviar mensagens do Slack.",
                     "default_channel": "O canal para o qual publicar se n\u00e3o for especificado nenhum canal ao enviar uma mensagem.",
+                    "icon": "Utilize um dos emojis do Slack como um \u00edcone para o nome de utilizador fornecido.",
                     "username": "O Home Assistant ir\u00e1 publicar no Slack utilizando o nome de utilizador especificado."
                 },
                 "description": "Consulte a documenta\u00e7\u00e3o sobre como obter sua chave de API do Slack."