homeassistant 2025.10.1__py3-none-any.whl → 2025.10.3__py3-none-any.whl

homeassistant/components/nederlandse_spoorwegen/translations/hu.json

@@ -0,0 +1,28 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "A szolg\u00e1ltat\u00e1s m\u00e1r konfigur\u00e1lva van"
+        },
+        "error": {
+            "invalid_auth": "\u00c9rv\u00e9nytelen API kulcs",
+            "unknown": "V\u00e1ratlan hiba"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "api_key": "API kulcs"
+                }
+            }
+        }
+    },
+    "config_subentries": {
+        "route": {
+            "abort": {
+                "cannot_connect": "Sikertelen csatlakoz\u00e1s"
+            },
+            "error": {
+                "cannot_connect": "Sikertelen csatlakoz\u00e1s"
+            }
+        }
+    }
+}

homeassistant/components/nest/translations/hu.json

@@ -50,7 +50,7 @@
             },
             "pick_implementation": {
                 "data": {
-                    "implementation": "Alkalmaz\u00e1s-hiteles\u00edt\u0151 adatok"
+                    "implementation": "Alkalmaz\u00e1s hiteles\u00edt\u0151 adatai"
                 },
                 "data_description": {
                     "implementation": "A hiteles\u00edt\u00e9shez haszn\u00e1land\u00f3 hiteles\u00edt\u0151 adatok"

homeassistant/components/netatmo/translations/hu.json

@@ -17,7 +17,7 @@
         "step": {
             "pick_implementation": {
                 "data": {
-                    "implementation": "Alkalmaz\u00e1s-hiteles\u00edt\u0151 adatok"
+                    "implementation": "Alkalmaz\u00e1s hiteles\u00edt\u0151 adatai"
                 },
                 "data_description": {
                     "implementation": "A hiteles\u00edt\u00e9shez haszn\u00e1land\u00f3 hiteles\u00edt\u0151 adatok"

homeassistant/components/nibe_heatpump/config_flow.py

@@ -73,6 +73,13 @@ STEP_MODBUS_DATA_SCHEMA = vol.Schema(
 )
 
 
+STEP_MODBUS_PLACEHOLDERS = {
+    "tcp": "tcp://[HOST]:[PORT]",
+    "serial": "serial://[LOCAL DEVICE]",
+    "rfc2217": "rfc2217://[HOST]:[PORT]",
+}
+
+
 class FieldError(Exception):
     """Field with invalid data."""
 
@@ -183,7 +190,9 @@ class NibeHeatPumpConfigFlow(ConfigFlow, domain=DOMAIN):
         """Handle the modbus step."""
         if user_input is None:
             return self.async_show_form(
-                step_id="modbus", data_schema=STEP_MODBUS_DATA_SCHEMA
+                step_id="modbus",
+                data_schema=STEP_MODBUS_DATA_SCHEMA,
+                description_placeholders=STEP_MODBUS_PLACEHOLDERS,
             )
 
         errors = {}
@@ -200,7 +209,10 @@ class NibeHeatPumpConfigFlow(ConfigFlow, domain=DOMAIN):
             return self.async_create_entry(title=title, data=data)
 
         return self.async_show_form(
-            step_id="modbus", data_schema=STEP_MODBUS_DATA_SCHEMA, errors=errors
+            step_id="modbus",
+            data_schema=STEP_MODBUS_DATA_SCHEMA,
+            errors=errors,
+            description_placeholders=STEP_MODBUS_PLACEHOLDERS,
         )
 
     async def async_step_nibegw(

homeassistant/components/nibe_heatpump/strings.json

@@ -15,7 +15,7 @@
           "modbus_unit": "Modbus unit identifier"
         },
         "data_description": {
-          "modbus_url": "Modbus URL that describes the connection to your heat pump or MODBUS40 unit. It should be in the form:\n - `tcp://[HOST]:[PORT]` for Modbus TCP connection\n - `serial://[LOCAL DEVICE]` for a local Modbus RTU connection\n - `rfc2217://[HOST]:[PORT]` for a remote Telnet-based Modbus RTU connection.",
+          "modbus_url": "Modbus URL that describes the connection to your heat pump or MODBUS40 unit. It should be in the form:\n - `{tcp}` for Modbus TCP connection\n - `{serial}` for a local Modbus RTU connection\n - `{rfc2217}` for a remote Telnet-based Modbus RTU connection.",
           "modbus_unit": "Unit identification for your heat pump. Can usually be left at 0."
         }
       },

homeassistant/components/nibe_heatpump/translations/cs.json

@@ -18,7 +18,7 @@
                 },
                 "data_description": {
                     "modbus_unit": "Identifikace jednotky pro va\u0161e tepeln\u00e9 \u010derpadlo. Obvykle lze ponechat na 0.",
-                    "modbus_url": "URL Modbus, kter\u00e1 popisuje p\u0159ipojen\u00ed k va\u0161emu tepeln\u00e9mu \u010derpadlu nebo jednotce MODBUS40. Adresa by m\u011bla m\u00edt tvar:\n- \"tcp://[HOSTITEL]:[PORT]\" pro p\u0159ipojen\u00ed Modbus TCP\n- \"serial://[M\u00cdSTN\u00cd ZA\u0158\u00cdZEN\u00cd]\" pro m\u00edstn\u00ed p\u0159ipojen\u00ed Modbus RTU\n- \"rfc2217://[HOSTITEL]:[PORT]\" pro vzd\u00e1len\u00e9 p\u0159ipojen\u00ed Modbus RTU zalo\u017een\u00e9 na telnetu"
+                    "modbus_url": "URL adresa Modbusu, kter\u00e1 popisuje p\u0159ipojen\u00ed k va\u0161emu tepeln\u00e9mu \u010derpadlu nebo jednotce MODBUS40. M\u011bla by b\u00fdt ve tvaru:\n- \"{tcp}\" pro p\u0159ipojen\u00ed Modbus TCP\n- \"{serial}\" pro lok\u00e1ln\u00ed p\u0159ipojen\u00ed Modbus RTU\n- \"{rfc2217}\" pro vzd\u00e1len\u00e9 p\u0159ipojen\u00ed Modbus RTU zalo\u017een\u00e9 na protokolu Telnet"
                 }
             },
             "nibegw": {

homeassistant/components/nibe_heatpump/translations/de.json

@@ -18,7 +18,7 @@
                 },
                 "data_description": {
                     "modbus_unit": "Einheitenkennung f\u00fcr deine W\u00e4rmepumpe. Kann normalerweise auf 0 belassen werden.",
-                    "modbus_url": "Modbus-URL, die die Verbindung zu deiner W\u00e4rmepumpe oder deinem MODBUS40-Ger\u00e4t beschreibt. Sie sollte in folgender Form sein:\n - `tcp://[HOST]:[PORT]` f\u00fcr eine Modbus TCP-Verbindung\n - `serial://[LOKALES GER\u00c4T]` f\u00fcr eine lokale Modbus RTU-Verbindung\n - `rfc2217://[HOST]:[PORT]` f\u00fcr eine Telnet-basierte Modbus RTU-Fernverbindung."
+                    "modbus_url": "Modbus-URL, die die Verbindung zu deiner W\u00e4rmepumpe oder deinem MODBUS40-Ger\u00e4t beschreibt. Sie sollte in folgender Form sein:\n - `{tcp}` f\u00fcr eine Modbus-TCP-Verbindung \n - `{serial}` f\u00fcr eine lokale Modbus-RTU-Verbindung \n - `{rfc2217}` f\u00fcr eine Telnet-basierte Modbus RTU-Fernverbindung."
                 }
             },
             "nibegw": {

homeassistant/components/nibe_heatpump/translations/el.json

@@ -17,8 +17,7 @@
                     "model": "\u039c\u03bf\u03bd\u03c4\u03ad\u03bb\u03bf \u03b1\u03bd\u03c4\u03bb\u03af\u03b1\u03c2 \u03b8\u03b5\u03c1\u03bc\u03cc\u03c4\u03b7\u03c4\u03b1\u03c2"
                 },
                 "data_description": {
-                    "modbus_unit": "\u0391\u03bd\u03b1\u03b3\u03bd\u03c9\u03c1\u03b9\u03c3\u03c4\u03b9\u03ba\u03cc \u03bc\u03bf\u03bd\u03ac\u03b4\u03b1\u03c2 \u03b3\u03b9\u03b1 \u03c4\u03b7\u03bd \u03b1\u03bd\u03c4\u03bb\u03af\u03b1 \u03b8\u03b5\u03c1\u03bc\u03cc\u03c4\u03b7\u03c4\u03b1\u03c2. \u03a3\u03c5\u03bd\u03ae\u03b8\u03c9\u03c2 \u03bc\u03c0\u03bf\u03c1\u03b5\u03af \u03bd\u03b1 \u03bc\u03b5\u03af\u03bd\u03b5\u03b9 \u03c3\u03c4\u03bf 0.",
-                    "modbus_url": "URL Modbus \u03c0\u03bf\u03c5 \u03c0\u03b5\u03c1\u03b9\u03b3\u03c1\u03ac\u03c6\u03b5\u03b9 \u03c4\u03b7 \u03c3\u03cd\u03bd\u03b4\u03b5\u03c3\u03b7 \u03bc\u03b5 \u03c4\u03b7\u03bd \u03b1\u03bd\u03c4\u03bb\u03af\u03b1 \u03b8\u03b5\u03c1\u03bc\u03cc\u03c4\u03b7\u03c4\u03b1\u03c2 \u03ae \u03c4\u03b7 \u03bc\u03bf\u03bd\u03ac\u03b4\u03b1 MODBUS40. \u0398\u03b1 \u03c0\u03c1\u03ad\u03c0\u03b5\u03b9 \u03bd\u03b1 \u03b5\u03af\u03bd\u03b1\u03b9 \u03c3\u03c4\u03b7 \u03c6\u03cc\u03c1\u03bc\u03b1:\n - `tcp://[HOST]:[PORT]` \u03b3\u03b9\u03b1 \u03c3\u03cd\u03bd\u03b4\u03b5\u03c3\u03b7 Modbus TCP\n - `serial://[LOCAL DEVICE]` \u03b3\u03b9\u03b1 \u03c4\u03bf\u03c0\u03b9\u03ba\u03ae \u03c3\u03cd\u03bd\u03b4\u03b5\u03c3\u03b7 Modbus RTU\n - `rfc2217://[HOST]:[PORT]` \u03b3\u03b9\u03b1 \u03b1\u03c0\u03bf\u03bc\u03b1\u03ba\u03c1\u03c5\u03c3\u03bc\u03ad\u03bd\u03b7 \u03c3\u03cd\u03bd\u03b4\u03b5\u03c3\u03b7 Modbus RTU \u03c0\u03bf\u03c5 \u03b2\u03b1\u03c3\u03af\u03b6\u03b5\u03c4\u03b1\u03b9 \u03c3\u03b5 Telnet."
+                    "modbus_unit": "\u0391\u03bd\u03b1\u03b3\u03bd\u03c9\u03c1\u03b9\u03c3\u03c4\u03b9\u03ba\u03cc \u03bc\u03bf\u03bd\u03ac\u03b4\u03b1\u03c2 \u03b3\u03b9\u03b1 \u03c4\u03b7\u03bd \u03b1\u03bd\u03c4\u03bb\u03af\u03b1 \u03b8\u03b5\u03c1\u03bc\u03cc\u03c4\u03b7\u03c4\u03b1\u03c2. \u03a3\u03c5\u03bd\u03ae\u03b8\u03c9\u03c2 \u03bc\u03c0\u03bf\u03c1\u03b5\u03af \u03bd\u03b1 \u03bc\u03b5\u03af\u03bd\u03b5\u03b9 \u03c3\u03c4\u03bf 0."
                 }
             },
             "nibegw": {

homeassistant/components/nibe_heatpump/translations/en-GB.json

@@ -18,7 +18,7 @@
                 },
                 "data_description": {
                     "modbus_unit": "Unit identification for your heat pump. Can usually be left at 0.",
-                    "modbus_url": "Modbus URL that describes the connection to your heat pump or MODBUS40 unit. It should be in the form:\n - `tcp://[HOST]:[PORT]` for Modbus TCP connection\n - `serial://[LOCAL DEVICE]` for a local Modbus RTU connection\n - `rfc2217://[HOST]:[PORT]` for a remote Telnet-based Modbus RTU connection."
+                    "modbus_url": "Modbus URL that describes the connection to your heat pump or MODBUS40 unit. It should be in the form:\n - `{tcp}` for Modbus TCP connection\n - `{serial}` for a local Modbus RTU connection\n - `{rfc2217}` for a remote Telnet-based Modbus RTU connection."
                 }
             },
             "nibegw": {

homeassistant/components/nibe_heatpump/translations/en.json

@@ -18,7 +18,7 @@
                 },
                 "data_description": {
                     "modbus_unit": "Unit identification for your heat pump. Can usually be left at 0.",
-                    "modbus_url": "Modbus URL that describes the connection to your heat pump or MODBUS40 unit. It should be in the form:\n - `tcp://[HOST]:[PORT]` for Modbus TCP connection\n - `serial://[LOCAL DEVICE]` for a local Modbus RTU connection\n - `rfc2217://[HOST]:[PORT]` for a remote Telnet-based Modbus RTU connection."
+                    "modbus_url": "Modbus URL that describes the connection to your heat pump or MODBUS40 unit. It should be in the form:\n - `{tcp}` for Modbus TCP connection\n - `{serial}` for a local Modbus RTU connection\n - `{rfc2217}` for a remote Telnet-based Modbus RTU connection."
                 }
             },
             "nibegw": {

homeassistant/components/nibe_heatpump/translations/es.json

@@ -18,7 +18,7 @@
                 },
                 "data_description": {
                     "modbus_unit": "Identificaci\u00f3n de la unidad de tu bomba de calor. Normalmente se puede dejar en 0.",
-                    "modbus_url": "URL Modbus que describe la conexi\u00f3n a tu bomba de calor o unidad MODBUS40. Debe tener el formato: \n - `tcp://[HOST]:[PORT]` para una conexi\u00f3n Modbus TCP \n - `serial://[LOCAL DEVICE]` para una conexi\u00f3n Modbus RTU local \n - `rfc2217://[HOST]:[PORT]` para una conexi\u00f3n Modbus RTU remota basada en Telnet."
+                    "modbus_url": "URL Modbus que describe la conexi\u00f3n a tu bomba de calor o unidad MODBUS40. Debe tener el formato: \n - `{tcp}` para una conexi\u00f3n Modbus TCP \n - `{serial}` para una conexi\u00f3n Modbus RTU local \n - `{rfc2217}` para una conexi\u00f3n Modbus RTU remota basada en Telnet."
                 }
             },
             "nibegw": {

homeassistant/components/nibe_heatpump/translations/et.json

@@ -18,7 +18,7 @@
                 },
                 "data_description": {
                     "modbus_unit": "Soojuspumba seadme identifitseerimine. Tavaliselt v\u00f5ib j\u00e4tta 0-le.",
-                    "modbus_url": "Modbusi URL mis kirjeldab \u00fchendust soojuspumba v\u00f5i MODBUS40 seadmega. See peaks olema vormis:\n - `tcp://[HOST]:[PORT]` Modbusi TCP-\u00fchenduse jaoks\n - \"serial://[LOCAL DEVICE]\" kohaliku Modbus RTU \u00fchenduse jaoks\n - `rfc2217://[HOST]:[PORT]` telnetip\u00f5hise Modbus RTU kaug\u00fchenduse jaoks."
+                    "modbus_url": "Modbusi URL mis kirjeldab \u00fchendust soojuspumba v\u00f5i MODBUS40 seadmega. See peaks olema vormis:\n - `{tcp}` Modbusi TCP-\u00fchenduse jaoks\n - `{serial}` kohaliku Modbus RTU \u00fchenduse jaoks\n - `{rfc2217}`` telnetip\u00f5hise Modbus RTU kaug\u00fchenduse jaoks."
                 }
             },
             "nibegw": {

homeassistant/components/nibe_heatpump/translations/fy.json

@@ -10,8 +10,7 @@
                     "model": "Model fan waarmtepomp"
                 },
                 "data_description": {
-                    "modbus_unit": "Ienheids identifikaasje fan dyn Waarmtepomp. Kin trochstrings litten wurde op 0.",
-                    "modbus_url": "Modbus URL dy't de ferbining nei dyn Warmtepomp of MODBUS40 ienheid beskriuwt. Moat yn'e foarm w\u00eaze fan:\n- `tcp://[HOST]:[PORT]` foar de Modbus TCP ferbining\n- `serial://[LOCAL DEVICE]` foar in lokale Modbus RTU ferbining\n - `rfc2217://[HOST]:[PORT]` foar in eksterne Telnet basearre Modbus RTU ferbining."
+                    "modbus_unit": "Ienheids identifikaasje fan dyn Waarmtepomp. Kin trochstrings litten wurde op 0."
                 }
             }
         }

homeassistant/components/nibe_heatpump/translations/ga.json

@@ -17,8 +17,7 @@
                     "model": "M\u00fanla caid\u00e9il teasa"
                 },
                 "data_description": {
-                    "modbus_unit": "Aitheantas aonaid do do chaid\u00e9al teasa. Is f\u00e9idir \u00e9 a fh\u00e1g\u00e1il ag 0 de ghn\u00e1th.",
-                    "modbus_url": "URL Modbus a chuireann s\u00edos ar an nasc le do chaid\u00e9al teasa n\u00f3 aonad MODBUS40. Ba ch\u00f3ir go mbeadh s\u00e9 san fhoirm seo a leanas:\n- `tcp://[HOST]:[PORT]` le haghaidh nasc TCP Modbus\n- `serial://[LOCAL DEVICE]` le haghaidh nasc \u00e1iti\u00fail Modbus RTU\n- `rfc2217://[HOST]:[PORT]` le haghaidh nasc iarg\u00falta Modbus RTU bunaithe ar Telnet."
+                    "modbus_unit": "Aitheantas aonaid do do chaid\u00e9al teasa. Is f\u00e9idir \u00e9 a fh\u00e1g\u00e1il ag 0 de ghn\u00e1th."
                 }
             },
             "nibegw": {

homeassistant/components/nibe_heatpump/translations/hu.json

@@ -17,8 +17,7 @@
                     "model": "A h\u0151szivatty\u00fa modellje"
                 },
                 "data_description": {
-                    "modbus_unit": "A h\u0151szivatty\u00fa egys\u00e9gazonos\u00edt\u00f3ja. \u00c1ltal\u00e1ban 0 \u00e9rt\u00e9ken hagyhat\u00f3.",
-                    "modbus_url": "A Modbus URL, amely le\u00edrja a h\u0151szivatty\u00faj\u00e1hoz vagy MODBUS40 egys\u00e9g\u00e9hez val\u00f3 csatlakoz\u00e1st. A k\u00f6vetkez\u0151 form\u00e1tumban kell megadni:  \n- `tcp://[HOST]:[PORT]` Modbus TCP kapcsolat eset\u00e9n  \n- `serial://[LOCAL DEVICE]` helyi Modbus RTU kapcsolat eset\u00e9n  \n- `rfc2217://[HOST]:[PORT]` t\u00e1voli, Telnet-alap\u00fa Modbus RTU kapcsolat eset\u00e9n"
+                    "modbus_unit": "A h\u0151szivatty\u00fa egys\u00e9gazonos\u00edt\u00f3ja. \u00c1ltal\u00e1ban 0 \u00e9rt\u00e9ken hagyhat\u00f3."
                 }
             },
             "nibegw": {

homeassistant/components/nibe_heatpump/translations/lt.json

@@ -17,8 +17,7 @@
                     "model": "\u0160ilumos siurblio modelis"
                 },
                 "data_description": {
-                    "modbus_unit": "J\u016bs\u0173 \u0161ilumos siurblio \u012frenginio identifikavimas. Paprastai galima palikti ties 0.",
-                    "modbus_url": "\u201eModbus\u201c URL, apib\u016bdinantis ry\u0161\u012f su \u0161ilumos siurbliu arba MODBUS40 \u012frenginiu. Ji tur\u0117t\u0173 b\u016bti tokia forma: \n - `tcp://[HOST]:[PORT]` Modbus TCP ry\u0161iui \n - `serial://[LOCAL DEVICE]` vietiniam Modbus RTU ry\u0161iui \n - `rfc2217://[HOST] nuotoliniam magistral\u0117s RTU ry\u0161iui:[PORT]-`"
+                    "modbus_unit": "J\u016bs\u0173 \u0161ilumos siurblio \u012frenginio identifikavimas. Paprastai galima palikti ties 0."
                 }
             },
             "nibegw": {

homeassistant/components/nibe_heatpump/translations/pt.json

@@ -18,7 +18,7 @@
                 },
                 "data_description": {
                     "modbus_unit": "Identifica\u00e7\u00e3o da unidade da sua bomba de calor. Normalmente, pode ser deixado a 0.",
-                    "modbus_url": "URL Modbus que descreve a liga\u00e7\u00e3o \u00e0 sua bomba de calor ou unidade MODBUS40. Deve estar no formato:\n - `tcp://[HOST]:[PORT]` para uma liga\u00e7\u00e3o Modbus TCP\n - `serial://[LOCAL DEVICE]` para uma liga\u00e7\u00e3o Modbus RTU local\n - `rfc2217://[HOST]:[PORT]` para uma liga\u00e7\u00e3o Modbus RTU baseada em telnet remota."
+                    "modbus_url": "URL Modbus que descreve a liga\u00e7\u00e3o \u00e0 sua bomba de calor ou unidade MODBUS40. Deve ter o seguinte formato:\n- `{tcp}` para uma liga\u00e7\u00e3o Modbus TCP\n- `{serial}` para uma liga\u00e7\u00e3o Modbus RTU local\n- `{rfc2217}` para uma liga\u00e7\u00e3o Modbus RTU remota baseada em Telnet."
                 }
             },
             "nibegw": {

homeassistant/components/nibe_heatpump/translations/ru.json

@@ -18,7 +18,7 @@
                 },
                 "data_description": {
                     "modbus_unit": "\u0418\u0434\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u044f \u0412\u0430\u0448\u0435\u0433\u043e \u0442\u0435\u043f\u043b\u043e\u0432\u043e\u0433\u043e \u043d\u0430\u0441\u043e\u0441\u0430. \u041e\u0431\u044b\u0447\u043d\u043e \u043c\u043e\u0436\u043d\u043e \u043e\u0441\u0442\u0430\u0432\u0438\u0442\u044c \u043d\u0430 0.",
-                    "modbus_url": "URL-\u0430\u0434\u0440\u0435\u0441 Modbus, \u043e\u043f\u0438\u0441\u044b\u0432\u0430\u044e\u0449\u0438\u0439 \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u0438\u0435 \u043a \u0412\u0430\u0448\u0435\u043c\u0443 \u0442\u0435\u043f\u043b\u043e\u0432\u043e\u043c\u0443 \u043d\u0430\u0441\u043e\u0441\u0443 \u0438\u043b\u0438 \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0443 MODBUS40. \u041e\u043d \u0434\u043e\u043b\u0436\u0435\u043d \u0431\u044b\u0442\u044c \u0432 \u0444\u043e\u0440\u043c\u0430\u0442\u0435:\n- `tcp://[HOST]:[PORT]` \u0434\u043b\u044f \u0441\u043e\u0435\u0434\u0438\u043d\u0435\u043d\u0438\u044f Modbus TCP\n- `serial://[LOCAL DEVICE]` \u0434\u043b\u044f \u043b\u043e\u043a\u0430\u043b\u044c\u043d\u043e\u0433\u043e \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u0438\u044f Modbus RTU\n- `rfc2217://[HOST]:[PORT]` \u0434\u043b\u044f \u0443\u0434\u0430\u043b\u0435\u043d\u043d\u043e\u0433\u043e \u0441\u043e\u0435\u0434\u0438\u043d\u0435\u043d\u0438\u044f Modbus RTU \u0447\u0435\u0440\u0435\u0437 Telnet."
+                    "modbus_url": "URL-\u0430\u0434\u0440\u0435\u0441 Modbus, \u043e\u043f\u0438\u0441\u044b\u0432\u0430\u044e\u0449\u0438\u0439 \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u0438\u0435 \u043a \u0412\u0430\u0448\u0435\u043c\u0443 \u0442\u0435\u043f\u043b\u043e\u0432\u043e\u043c\u0443 \u043d\u0430\u0441\u043e\u0441\u0443 \u0438\u043b\u0438 \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0443 MODBUS40. \u041e\u043d \u0434\u043e\u043b\u0436\u0435\u043d \u0431\u044b\u0442\u044c \u0432 \u0444\u043e\u0440\u043c\u0430\u0442\u0435:\n- `{tcp}` \u0434\u043b\u044f \u0441\u043e\u0435\u0434\u0438\u043d\u0435\u043d\u0438\u044f Modbus TCP\n- `{serial}` \u0434\u043b\u044f \u043b\u043e\u043a\u0430\u043b\u044c\u043d\u043e\u0433\u043e \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u0438\u044f Modbus RTU\n- `{rfc2217}` \u0434\u043b\u044f \u0443\u0434\u0430\u043b\u0435\u043d\u043d\u043e\u0433\u043e \u0441\u043e\u0435\u0434\u0438\u043d\u0435\u043d\u0438\u044f Modbus RTU \u0447\u0435\u0440\u0435\u0437 Telnet."
                 }
             },
             "nibegw": {

homeassistant/components/nibe_heatpump/translations/sk.json

@@ -18,7 +18,7 @@
                 },
                 "data_description": {
                     "modbus_unit": "Identifik\u00e1cia jednotky pre va\u0161e tepeln\u00e9 \u010derpadlo. Zvy\u010dajne sa m\u00f4\u017ee ponecha\u0165 na 0.",
-                    "modbus_url": "Modbus URL, ktor\u00e1 opisuje pripojenie k tepeln\u00e9mu \u010derpadlu alebo jednotke MODBUS40. Malo by by\u0165 v tvare: - `tcp://[HOST]:[PORT]` pre pripojenie Modbus TCP - `serial://[LOCAL DEVICE]` pre miestne pripojenie Modbus RTU - `rfc2217://[HOST]:[PORT]` pre vzdialen\u00e9 pripojenie Modbus RTU zalo\u017een\u00e9 na sieti Telnet."
+                    "modbus_url": "Modbus URL, ktor\u00e1 opisuje pripojenie k tepeln\u00e9mu \u010derpadlu alebo jednotke MODBUS40. Mal by by\u0165 v tvare: \n- `{tcp}` pre pripojenie Modbus TCP \n- `{serial}` pre lok\u00e1lne pripojenie Modbus RTU \n- `{rfc2217}` pre vzdialen\u00e9 pripojenie Modbus RTU zalo\u017een\u00e9 na sieti Telnet."
                 }
             },
             "nibegw": {

homeassistant/components/nibe_heatpump/translations/sv.json

@@ -17,8 +17,7 @@
                     "model": "Modell av v\u00e4rmepump"
                 },
                 "data_description": {
-                    "modbus_unit": "Enhetsidentifiering f\u00f6r din v\u00e4rmepump. Kan vanligtvis l\u00e4mnas p\u00e5 0.",
-                    "modbus_url": "Modbus-URL som beskriver anslutningen till din v\u00e4rmepump eller MODBUS40-enhet. Den b\u00f6r vara i formen:\n - `tcp://[HOST]:[PORT]` f\u00f6r Modbus TCP-anslutning\n - `serial://[LOCAL DEVICE]` f\u00f6r en lokal Modbus RTU-anslutning\n - `rfc2217://[HOST]:[PORT]` f\u00f6r en fj\u00e4rrstyrd telnetbaserad Modbus RTU-anslutning."
+                    "modbus_unit": "Enhetsidentifiering f\u00f6r din v\u00e4rmepump. Kan vanligtvis l\u00e4mnas p\u00e5 0."
                 }
             },
             "nibegw": {

homeassistant/components/nibe_heatpump/translations/zh-Hans.json

@@ -18,7 +18,7 @@
                 },
                 "data_description": {
                     "modbus_unit": "\u60a8\u70ed\u6cf5\u7684\u5355\u5143\u6807\u8bc6\u3002\u901a\u5e38\u53ef\u4fdd\u7559\u4e3a 0 \u3002",
-                    "modbus_url": "\u70ed\u6cf5\u6216 MODBUS40 \u88c5\u7f6e\u7684 Modbus \u7f51\u5740\u3002\u5176\u683c\u5f0f\u5e94\u4e3a\uff1a\n- `tcp://[HOST]:[PORT]` \u7528\u4e8e Modbus TCP \u8fde\u63a5\n- `serial://[LOCAL DEVICE]` \u7528\u4e8e\u672c\u5730 Modbus RTU \u8fde\u63a5\n- `rfc2217://[HOST]:[PORT]` \u7528\u4e8e\u57fa\u4e8e\u8fdc\u7a0b Telnet \u7684 Modbus RTU \u8fde\u63a5\u3002"
+                    "modbus_url": "\u63cf\u8ff0\u4e0e\u60a8\u7684\u70ed\u6cf5\u6216 MODBUS40 \u8bbe\u5907\u8fde\u63a5\u7684 Modbus \u7f51\u5740\u3002\u5176\u683c\u5f0f\u5e94\u4e3a\uff1a\n - \u201c{tcp}\u201d \u7528\u4e8e Modbus TCP \u8fde\u63a5\n - \u201c{serial}\u201d \u7528\u4e8e\u672c\u5730 Modbus RTU \u8fde\u63a5\n - \u201c{rfc2217}\u201d \u7528\u4e8e\u57fa\u4e8e Telnet \u7684\u8fdc\u7a0b Modbus RTU \u8fde\u63a5\u3002"
                 }
             },
             "nibegw": {

homeassistant/components/nibe_heatpump/translations/zh-Hant.json

@@ -18,7 +18,7 @@
                 },
                 "data_description": {
                     "modbus_unit": "\u71b1\u6cf5\u8a2d\u5099\u8b58\u5225\uff0c\u901a\u5e38\u53ef\u4ee5\u4fdd\u7559\u70ba 0\u3002",
-                    "modbus_url": "Modbus URL \u70ba\u9023\u7dda\u81f3\u71b1\u6cf5\u6216 MODBUS40 \u8a2d\u5099\u4e4b\u5167\u5bb9\u3001\u61c9\u8a72\u70ba\u4e0b\u5217\u683c\u5f0f\uff1a\n - `tcp://[HOST]:[PORT]` \u7528\u70ba Modbus TCP \u9023\u7dda\n - `serial://[LOCAL DEVICE]` \u7528\u70ba\u672c\u5730\u7aef Modbus RTU \u9023\u7dda\n - `rfc2217://[HOST]:[PORT]` \u7528\u70ba\u9060\u7aef telnet \u985e\u578b Modbus RTU \u9023\u7dda\u3002"
+                    "modbus_url": "Modbus URL \u70ba\u9023\u7dda\u81f3\u71b1\u6cf5\u6216 MODBUS40 \u8a2d\u5099\u4e4b\u5167\u5bb9\u3001\u61c9\u8a72\u70ba\u4e0b\u5217\u683c\u5f0f\uff1a\n - `{tcp}` \u7528\u70ba Modbus TCP \u9023\u7dda\n - `{serial}` \u7528\u70ba\u672c\u5730\u7aef Modbus RTU \u9023\u7dda\n - `{rfc2217}` \u7528\u70ba\u9060\u7aef telnet \u985e\u578b Modbus RTU \u9023\u7dda\u3002"
                 }
             },
             "nibegw": {

homeassistant/components/niko_home_control/translations/hu.json

@@ -1,12 +1,18 @@
 {
     "config": {
         "abort": {
-            "already_configured": "Az eszk\u00f6z m\u00e1r konfigur\u00e1lva van"
+            "already_configured": "Az eszk\u00f6z m\u00e1r konfigur\u00e1lva van",
+            "reconfigure_successful": "\u00dajrakonfigur\u00e1l\u00e1s sikeres volt"
         },
         "error": {
             "cannot_connect": "Sikertelen csatlakoz\u00e1s"
         },
         "step": {
+            "reconfigure": {
+                "data": {
+                    "host": "Hoszt"
+                }
+            },
             "user": {
                 "data": {
                     "host": "Hoszt"

homeassistant/components/nmap_tracker/translations/cs.json

@@ -9,12 +9,12 @@
         "step": {
             "user": {
                 "data": {
-                    "exclude": "S\u00ed\u0165ov\u00e9 adresy (odd\u011blen\u00e9 \u010d\u00e1rkami), kter\u00e9 maj\u00ed b\u00fdt vylou\u010deny ze skenov\u00e1n\u00ed.",
+                    "exclude": "IP adresa, kter\u00e1 m\u00e1 b\u00fdt vylou\u010dena ze sledov\u00e1n\u00ed",
                     "home_interval": "Minim\u00e1ln\u00ed po\u010det minut mezi kontrolami aktivn\u00edch za\u0159\u00edzen\u00ed (\u0161et\u0159en\u00ed baterie)",
-                    "hosts": "S\u00ed\u0165ov\u00e9 adresy (odd\u011blen\u00e9 \u010d\u00e1rkami), kter\u00e9 se maj\u00ed skenovat",
+                    "hosts": "IP adresa nebo rozsah ke skenov\u00e1n\u00ed",
                     "scan_options": "Syrov\u00e9 nastaviteln\u00e9 volby skenov\u00e1n\u00ed pro Nmap"
                 },
-                "description": "Nastavte hostitele, kter\u00e9 m\u00e1 Nmap skenovat. S\u00ed\u0165ov\u00e1 adresa a vylou\u010den\u00ed mohou b\u00fdt IP adresy (192.168.1.1), IP s\u00edt\u011b (192.168.0.0/24) nebo rozsahy IP (192.168.1.0-32)."
+                "description": "Nastavte hostitele, kter\u00e9 m\u00e1 Nmap skenovat. IP adresy a vylou\u010den\u00e9 adresy mohou b\u00fdt adresy (192.168.1.1), s\u00edt\u011b (192.168.0.0/24) nebo rozsahy (192.168.1.0-32)."
             }
         }
     },
@@ -26,13 +26,13 @@
             "init": {
                 "data": {
                     "consider_home": "Sekundy \u010dek\u00e1n\u00ed, ne\u017e ozna\u010d\u00ed sledova\u010d za\u0159\u00edzen\u00ed jako Nep\u0159\u00edtomn\u00fd pot\u00e9, co ho nikdo nevid\u011bl.",
-                    "exclude": "S\u00ed\u0165ov\u00e9 adresy (odd\u011blen\u00e9 \u010d\u00e1rkami), kter\u00e9 maj\u00ed b\u00fdt vylou\u010deny ze skenov\u00e1n\u00ed.",
+                    "exclude": "IP adresa, kter\u00e1 m\u00e1 b\u00fdt vylou\u010dena ze sledov\u00e1n\u00ed",
                     "home_interval": "Minim\u00e1ln\u00ed po\u010det minut mezi kontrolami aktivn\u00edch za\u0159\u00edzen\u00ed (\u0161et\u0159en\u00ed baterie)",
-                    "hosts": "S\u00ed\u0165ov\u00e9 adresy (odd\u011blen\u00e9 \u010d\u00e1rkami), kter\u00e9 se maj\u00ed skenovat",
+                    "hosts": "IP adresa nebo rozsah ke skenov\u00e1n\u00ed",
                     "interval_seconds": "Interval skenov\u00e1n\u00ed",
                     "scan_options": "Syrov\u00e9 nastaviteln\u00e9 volby skenov\u00e1n\u00ed pro Nmap"
                 },
-                "description": "Nastavte hostitele, kter\u00e9 m\u00e1 Nmap skenovat. S\u00ed\u0165ov\u00e1 adresa a vylou\u010den\u00ed mohou b\u00fdt IP adresy (192.168.1.1), IP s\u00edt\u011b (192.168.0.0/24) nebo rozsahy IP (192.168.1.0-32)."
+                "description": "Nastavte hostitele, kter\u00e9 m\u00e1 Nmap skenovat. IP adresy a vylou\u010den\u00e9 adresy mohou b\u00fdt adresy (192.168.1.1), s\u00edt\u011b (192.168.0.0/24) nebo rozsahy (192.168.1.0-32)."
             }
         }
     },

homeassistant/components/nmap_tracker/translations/de.json

@@ -9,12 +9,12 @@
         "step": {
             "user": {
                 "data": {
-                    "exclude": "Netzwerkadressen (kommagetrennt), die vom Scannen ausgeschlossen werden sollen",
+                    "exclude": "Vom Tracking auszuschlie\u00dfende IP-Adresse",
                     "home_interval": "Mindestzahl von Minuten zwischen den Scans aktiver Ger\u00e4te (Batterieschonend)",
-                    "hosts": "Netzwerkadressen (kommagetrennt) zum Scannen",
+                    "hosts": "Zu scannende IP-Adresse oder Bereich",
                     "scan_options": "RAW konfigurierbare Scan-Optionen f\u00fcr Nmap"
                 },
-                "description": "Konfiguriere die Hosts, die von Nmap gescannt werden sollen. Netzwerkadresse und Ausschl\u00fcsse k\u00f6nnen IP-Adressen (192.168.1.1), IP-Netzwerke (192.168.0.0/24) oder IP-Bereiche (192.168.1.0-32) sein."
+                "description": "Konfiguriere die Hosts, die von Nmap gescannt werden sollen. IP-Adresse und Ausschl\u00fcsse k\u00f6nnen Adressen (192.168.1.1), Netzwerke (192.168.0.0/24) oder Bereiche (192.168.1.0-32) sein."
             }
         }
     },
@@ -26,13 +26,13 @@
             "init": {
                 "data": {
                     "consider_home": "Wartezeit in Sekunden, bis ein Ger\u00e4te-Tracker als nicht zuhause markiert wird, nachdem er nicht gesehen wurde.",
-                    "exclude": "Netzwerkadressen (kommagetrennt), die vom Scannen ausgeschlossen werden sollen",
+                    "exclude": "Vom Tracking auszuschlie\u00dfende IP-Adresse",
                     "home_interval": "Mindestzahl von Minuten zwischen den Scans aktiver Ger\u00e4te (Batterieschonend)",
-                    "hosts": "Netzwerkadressen (kommagetrennt) zum Scannen",
+                    "hosts": "Zu scannende IP-Adresse oder Bereich",
                     "interval_seconds": "Scan-Intervall",
                     "scan_options": "RAW konfigurierbare Scan-Optionen f\u00fcr Nmap"
                 },
-                "description": "Konfiguriere die Hosts, die von Nmap gescannt werden sollen. Netzwerkadresse und Ausschl\u00fcsse k\u00f6nnen IP-Adressen (192.168.1.1), IP-Netzwerke (192.168.0.0/24) oder IP-Bereiche (192.168.1.0-32) sein."
+                "description": "Konfiguriere die Hosts, die von Nmap gescannt werden sollen. IP-Adresse und Ausschl\u00fcsse k\u00f6nnen Adressen (192.168.1.1), Netzwerke (192.168.0.0/24) oder Bereiche (192.168.1.0-32) sein."
             }
         }
     },

homeassistant/components/nmap_tracker/translations/el.json

@@ -9,12 +9,9 @@
         "step": {
             "user": {
                 "data": {
-                    "exclude": "\u0394\u03b9\u03b5\u03c5\u03b8\u03cd\u03bd\u03c3\u03b5\u03b9\u03c2 \u03b4\u03b9\u03ba\u03c4\u03cd\u03bf\u03c5 (\u03c7\u03c9\u03c1\u03b9\u03c3\u03bc\u03ad\u03bd\u03b5\u03c2 \u03bc\u03b5 \u03ba\u03cc\u03bc\u03bc\u03b1\u03c4\u03b1) \u03b3\u03b9\u03b1 \u03b5\u03be\u03b1\u03af\u03c1\u03b5\u03c3\u03b7 \u03b1\u03c0\u03cc \u03c4\u03b7 \u03c3\u03ac\u03c1\u03c9\u03c3\u03b7",
                     "home_interval": "\u0395\u03bb\u03ac\u03c7\u03b9\u03c3\u03c4\u03bf\u03c2 \u03b1\u03c1\u03b9\u03b8\u03bc\u03cc\u03c2 \u03bb\u03b5\u03c0\u03c4\u03ce\u03bd \u03bc\u03b5\u03c4\u03b1\u03be\u03cd \u03c4\u03c9\u03bd \u03c3\u03b1\u03c1\u03ce\u03c3\u03b5\u03c9\u03bd \u03b5\u03bd\u03b5\u03c1\u03b3\u03ce\u03bd \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ce\u03bd (\u03b4\u03b9\u03b1\u03c4\u03ae\u03c1\u03b7\u03c3\u03b7 \u03c4\u03b7\u03c2 \u03bc\u03c0\u03b1\u03c4\u03b1\u03c1\u03af\u03b1\u03c2)",
-                    "hosts": "\u0394\u03b9\u03b5\u03c5\u03b8\u03cd\u03bd\u03c3\u03b5\u03b9\u03c2 \u03b4\u03b9\u03ba\u03c4\u03cd\u03bf\u03c5 (\u03c7\u03c9\u03c1\u03b9\u03c3\u03bc\u03ad\u03bd\u03b5\u03c2 \u03bc\u03b5 \u03ba\u03cc\u03bc\u03bc\u03b1\u03c4\u03b1) \u03b3\u03b9\u03b1 \u03c3\u03ac\u03c1\u03c9\u03c3\u03b7",
                     "scan_options": "\u0391\u03ba\u03b1\u03c4\u03ad\u03c1\u03b3\u03b1\u03c3\u03c4\u03b5\u03c2 \u03c0\u03b1\u03c1\u03b1\u03bc\u03b5\u03c4\u03c1\u03bf\u03c0\u03bf\u03b9\u03ae\u03c3\u03b9\u03bc\u03b5\u03c2 \u03b5\u03c0\u03b9\u03bb\u03bf\u03b3\u03ad\u03c2 \u03c3\u03ac\u03c1\u03c9\u03c3\u03b7\u03c2 \u03b3\u03b9\u03b1 \u03c4\u03bf Nmap"
-                },
-                "description": "\u0394\u03b9\u03b1\u03bc\u03cc\u03c1\u03c6\u03c9\u03c3\u03b7 \u03ba\u03b5\u03bd\u03c4\u03c1\u03b9\u03ba\u03ce\u03bd \u03c5\u03c0\u03bf\u03bb\u03bf\u03b3\u03b9\u03c3\u03c4\u03ce\u03bd \u03b3\u03b9\u03b1 \u03c3\u03ac\u03c1\u03c9\u03c3\u03b7 \u03b1\u03c0\u03cc \u03c4\u03bf Nmap. \u0397 \u03b4\u03b9\u03b5\u03cd\u03b8\u03c5\u03bd\u03c3\u03b7 \u03b4\u03b9\u03ba\u03c4\u03cd\u03bf\u03c5 \u03ba\u03b1\u03b9 \u03bf\u03b9 \u03b5\u03be\u03b1\u03b9\u03c1\u03ad\u03c3\u03b5\u03b9\u03c2 \u03bc\u03c0\u03bf\u03c1\u03b5\u03af \u03bd\u03b1 \u03b5\u03af\u03bd\u03b1\u03b9 \u03b4\u03b9\u03b5\u03c5\u03b8\u03cd\u03bd\u03c3\u03b5\u03b9\u03c2 IP (192.168.1.1), \u03b4\u03af\u03ba\u03c4\u03c5\u03b1 IP (192.168.0.0/24) \u03ae \u03b5\u03cd\u03c1\u03bf\u03c2 IP (192.168.1.0-32)."
+                }
             }
         }
     },

homeassistant/components/nmap_tracker/translations/en-GB.json

@@ -9,12 +9,12 @@
         "step": {
             "user": {
                 "data": {
-                    "exclude": "Network addresses (comma-separated) to exclude from scanning",
+                    "exclude": "IP address to exclude from tracking",
                     "home_interval": "Minimum number of minutes between scans of active devices (preserve battery)",
-                    "hosts": "Network addresses (comma-separated) to scan",
+                    "hosts": "IP address or range to scan",
                     "scan_options": "Raw configurable scan options for Nmap"
                 },
-                "description": "Configure hosts to be scanned by Nmap. Network address and excludes can be IP addresses (192.168.1.1), IP networks (192.168.0.0/24) or IP ranges (192.168.1.0-32)."
+                "description": "Configure hosts to be scanned by Nmap. IP address and excludes can be addresses (192.168.1.1), networks (192.168.0.0/24) or ranges (192.168.1.0-32)."
             }
         }
     },
@@ -26,13 +26,13 @@
             "init": {
                 "data": {
                     "consider_home": "Seconds to wait till marking a device tracker as not home after not being seen.",
-                    "exclude": "Network addresses (comma-separated) to exclude from scanning",
+                    "exclude": "IP address to exclude from tracking",
                     "home_interval": "Minimum number of minutes between scans of active devices (preserve battery)",
-                    "hosts": "Network addresses (comma-separated) to scan",
+                    "hosts": "IP address or range to scan",
                     "interval_seconds": "Scan interval",
                     "scan_options": "Raw configurable scan options for Nmap"
                 },
-                "description": "Configure hosts to be scanned by Nmap. Network address and excludes can be IP addresses (192.168.1.1), IP networks (192.168.0.0/24) or IP ranges (192.168.1.0-32)."
+                "description": "Configure hosts to be scanned by Nmap. IP address and excludes can be addresses (192.168.1.1), networks (192.168.0.0/24) or ranges (192.168.1.0-32)."
             }
         }
     },

homeassistant/components/nmap_tracker/translations/en.json

@@ -9,12 +9,12 @@
         "step": {
             "user": {
                 "data": {
-                    "exclude": "Network addresses (comma-separated) to exclude from scanning",
+                    "exclude": "IP address to exclude from tracking",
                     "home_interval": "Minimum number of minutes between scans of active devices (preserve battery)",
-                    "hosts": "Network addresses (comma-separated) to scan",
+                    "hosts": "IP address or range to scan",
                     "scan_options": "Raw configurable scan options for Nmap"
                 },
-                "description": "Configure hosts to be scanned by Nmap. Network address and excludes can be IP addresses (192.168.1.1), IP networks (192.168.0.0/24) or IP ranges (192.168.1.0-32)."
+                "description": "Configure hosts to be scanned by Nmap. IP address and excludes can be addresses (192.168.1.1), networks (192.168.0.0/24) or ranges (192.168.1.0-32)."
             }
         }
     },
@@ -26,13 +26,13 @@
             "init": {
                 "data": {
                     "consider_home": "Seconds to wait till marking a device tracker as not home after not being seen.",
-                    "exclude": "Network addresses (comma-separated) to exclude from scanning",
+                    "exclude": "IP address to exclude from tracking",
                     "home_interval": "Minimum number of minutes between scans of active devices (preserve battery)",
-                    "hosts": "Network addresses (comma-separated) to scan",
+                    "hosts": "IP address or range to scan",
                     "interval_seconds": "Scan interval",
                     "scan_options": "Raw configurable scan options for Nmap"
                 },
-                "description": "Configure hosts to be scanned by Nmap. Network address and excludes can be IP addresses (192.168.1.1), IP networks (192.168.0.0/24) or IP ranges (192.168.1.0-32)."
+                "description": "Configure hosts to be scanned by Nmap. IP address and excludes can be addresses (192.168.1.1), networks (192.168.0.0/24) or ranges (192.168.1.0-32)."
             }
         }
     },

homeassistant/components/nmap_tracker/translations/es.json

@@ -9,12 +9,12 @@
         "step": {
             "user": {
                 "data": {
-                    "exclude": "Direcciones de red (separadas por comas) para excluir del escaneo",
+                    "exclude": "Direcci\u00f3n IP a excluir del seguimiento",
                     "home_interval": "N\u00famero m\u00ednimo de minutos entre escaneos de dispositivos activos (conservar bater\u00eda)",
-                    "hosts": "Direcciones de red (separadas por comas) para escanear",
+                    "hosts": "Direcci\u00f3n IP o rango a escanear",
                     "scan_options": "Opciones de escaneo configurables sin formato para Nmap"
                 },
-                "description": "Configurar los hosts que Nmap analizar\u00e1. Las direcciones de red y las exclusiones pueden ser direcciones IP (192.168.1.1), redes IP (192.168.0.0/24) o rangos de IP (192.168.1.0-32)."
+                "description": "Configura los hosts que Nmap escanear\u00e1. Las direcciones IP y las exclusiones pueden ser direcciones (192.168.1.1), redes (192.168.0.0/24) o rangos (192.168.1.0-32)."
             }
         }
     },
@@ -26,13 +26,13 @@
             "init": {
                 "data": {
                     "consider_home": "Segundos de espera hasta marcar un rastreador de dispositivo como ausente despu\u00e9s de no ser visto.",
-                    "exclude": "Direcciones de red (separadas por comas) para excluir del escaneo",
+                    "exclude": "Direcci\u00f3n IP a excluir del seguimiento",
                     "home_interval": "N\u00famero m\u00ednimo de minutos entre escaneos de dispositivos activos (conservar bater\u00eda)",
-                    "hosts": "Direcciones de red (separadas por comas) para escanear",
+                    "hosts": "Direcci\u00f3n IP o rango a escanear",
                     "interval_seconds": "Intervalo de escaneo",
                     "scan_options": "Opciones de escaneo configurables sin formato para Nmap"
                 },
-                "description": "Configurar los hosts que Nmap analizar\u00e1. Las direcciones de red y las exclusiones pueden ser direcciones IP (192.168.1.1), redes IP (192.168.0.0/24) o rangos de IP (192.168.1.0-32)."
+                "description": "Configura los hosts que Nmap escanear\u00e1. Las direcciones IP y las exclusiones pueden ser direcciones (192.168.1.1), redes (192.168.0.0/24) o rangos (192.168.1.0-32)."
             }
         }
     },

homeassistant/components/nmap_tracker/translations/et.json

@@ -9,12 +9,12 @@
         "step": {
             "user": {
                 "data": {
-                    "exclude": "V\u00f5rguaadressid (komadega eraldatud) mis tuleb skaneerimisest v\u00e4lja j\u00e4tta",
+                    "exclude": "J\u00e4lgimisest v\u00e4lja j\u00e4etav IP-aadress",
                     "home_interval": "Minimaalne minutite arv aktiivsete seadmete skaneerimise vahel (aku s\u00e4ilitamine)",
-                    "hosts": "V\u00f5rgu aadressid (komadega eraldatud)",
+                    "hosts": "Skannitav IP-aadress v\u00f5i vahemik",
                     "scan_options": "Nmapi algseadistavad skaneerimisvalikud"
                 },
-                "description": "Konfigureeri hostid, mida Nmap skannib. V\u00f5rguaadress ja v\u00e4ljaj\u00e4etud v\u00f5ivad olla IP-aadressid (192.168.1.1), IP-v\u00f5rgud (192.168.0.0/24) v\u00f5i IP-vahemikud (192.168.1.0-32)."
+                "description": "Konfigureeri hostid mida Nmap skannib. IP aadress ja v\u00e4ljaj\u00e4etud v\u00f5ivad olla aadressid (192.168.1.1), v\u00f5rgud (192.168.0.0/24) v\u00f5i vahemikud (192.168.1.0-32)."
             }
         }
     },
@@ -32,7 +32,7 @@
                     "interval_seconds": "P\u00e4ringute intervall",
                     "scan_options": "Vaikimisi Nmap sk\u00e4nnimise valikud"
                 },
-                "description": "Konfigureeri hostid, mida Nmap skannib. V\u00f5rguaadress ja v\u00e4ljaj\u00e4etud v\u00f5ivad olla IP-aadressid (192.168.1.1), IP-v\u00f5rgud (192.168.0.0/24) v\u00f5i IP-vahemikud (192.168.1.0-32)."
+                "description": "Konfigureeri hostid mida Nmap skannib. IP aadress ja v\u00e4ljaj\u00e4etud v\u00f5ivad olla aadressid (192.168.1.1), v\u00f5rgud (192.168.0.0/24) v\u00f5i vahemikud (192.168.1.0-32)."
             }
         }
     },

homeassistant/components/nmap_tracker/translations/fr.json

@@ -9,12 +9,9 @@
         "step": {
             "user": {
                 "data": {
-                    "exclude": "Adresses r\u00e9seau (s\u00e9par\u00e9es par des virgules) \u00e0 exclure de l'analyse",
                     "home_interval": "Nombre minimum de minutes entre les analyses des appareils actifs (pr\u00e9server la batterie)",
-                    "hosts": "Adresses r\u00e9seau (s\u00e9par\u00e9es par des virgules) \u00e0 analyser",
                     "scan_options": "Options d'analyse brutes configurables pour Nmap"
-                },
-                "description": "Configurez les h\u00f4tes \u00e0 analyser par Nmap. Les adresses r\u00e9seau et les exclusions peuvent \u00eatre des adresses IP (192.168.1.1), des r\u00e9seaux IP (192.168.0.0/24) ou des plages IP (192.168.1.0-32)."
+                }
             }
         }
     },

homeassistant/components/nmap_tracker/translations/ga.json

@@ -9,12 +9,9 @@
         "step": {
             "user": {
                 "data": {
-                    "exclude": "Seolta\u00ed l\u00edonra (scartha le cam\u00f3ga) le heisiamh \u00f3n scanadh",
                     "home_interval": "L\u00edon \u00edosta n\u00f3im\u00e9ad idir scananna gl\u00e9asanna gn\u00edomhacha (ceallra\u00ed a chaomhn\u00fa)",
-                    "hosts": "Seolta\u00ed l\u00edonra (scartha le cam\u00f3ga) le scanadh",
                     "scan_options": "Roghanna scanadh inchumraithe amh le haghaidh Nmap"
-                },
-                "description": "Cumraigh \u00f3stach le scanadh ag Nmap. Is f\u00e9idir le seoladh l\u00edonra agus eisiaimh a bheith ina seolta\u00ed IP (192.168.1.1), l\u00edonra\u00ed IP (192.168.0.0/24) n\u00f3 raonta IP (192.168.1.0-32)."
+                }
             }
         }
     },

homeassistant/components/nmap_tracker/translations/he.json

@@ -9,12 +9,10 @@
         "step": {
             "user": {
                 "data": {
-                    "exclude": "\u05db\u05ea\u05d5\u05d1\u05d5\u05ea \u05e8\u05e9\u05ea (\u05de\u05d5\u05e4\u05e8\u05d3\u05d5\u05ea \u05d1\u05d0\u05de\u05e6\u05e2\u05d5\u05ea \u05e4\u05e1\u05d9\u05e7) \u05e9\u05dc\u05d0 \u05d9\u05d9\u05db\u05dc\u05dc\u05d5 \u05d1\u05e1\u05e8\u05d9\u05e7\u05d4",
                     "home_interval": "\u05de\u05e1\u05e4\u05e8 \u05de\u05d9\u05e0\u05d9\u05de\u05dc\u05d9 \u05e9\u05dc \u05d3\u05e7\u05d5\u05ea \u05d1\u05d9\u05df \u05e1\u05e8\u05d9\u05e7\u05d5\u05ea \u05e9\u05dc \u05d4\u05ea\u05e7\u05e0\u05d9\u05dd \u05e4\u05e2\u05d9\u05dc\u05d9\u05dd (\u05e9\u05d9\u05de\u05d5\u05e8 \u05e1\u05d5\u05dc\u05dc\u05d4)",
-                    "hosts": "\u05db\u05ea\u05d5\u05d1\u05d5\u05ea \u05e8\u05e9\u05ea (\u05de\u05d5\u05e4\u05e8\u05d3\u05d5\u05ea \u05d1\u05e4\u05e1\u05d9\u05e7) \u05dc\u05e1\u05e8\u05d9\u05e7\u05d4",
                     "scan_options": "\u05d0\u05e4\u05e9\u05e8\u05d5\u05d9\u05d5\u05ea \u05e1\u05e8\u05d9\u05e7\u05d4 \u05d2\u05d5\u05dc\u05de\u05d9\u05d5\u05ea \u05d4\u05e0\u05d9\u05ea\u05e0\u05d5\u05ea \u05dc\u05d4\u05d2\u05d3\u05e8\u05d4 \u05e2\u05d1\u05d5\u05e8 Nmap"
                 },
-                "description": "\u05d4\u05d2\u05d3\u05e8\u05ea \u05de\u05d0\u05e8\u05d7\u05d9\u05dd \u05dc\u05e1\u05e8\u05d9\u05e7\u05d4 \u05e2\u05dc-\u05d9\u05d3\u05d9 Nmap. \u05db\u05ea\u05d5\u05d1\u05ea \u05e8\u05e9\u05ea \u05d5\u05dc\u05d0 \u05e0\u05db\u05dc\u05dc\u05d9\u05dd \u05d9\u05db\u05d5\u05dc\u05d9\u05dd \u05dc\u05d4\u05d9\u05d5\u05ea \u05db\u05ea\u05d5\u05d1\u05d5\u05ea IP (192.168.1.1), \u05e8\u05e9\u05ea\u05d5\u05ea IP (192.168.0.0/24) \u05d0\u05d5 \u05d8\u05d5\u05d5\u05d7\u05d9 IP (192.168.1.0-32)."
+                "description": "\u05d4\u05d2\u05d3\u05e8\u05ea \u05de\u05d0\u05e8\u05d7\u05d9\u05dd \u05dc\u05e1\u05e8\u05d9\u05e7\u05d4 \u05e2\u05dc-\u05d9\u05d3\u05d9 Nmap. \u05db\u05ea\u05d5\u05d1\u05ea IP \u05d5\u05d7\u05e8\u05d9\u05d2\u05d9\u05dd \u05d9\u05db\u05d5\u05dc\u05d9\u05dd \u05dc\u05d4\u05d9\u05d5\u05ea \u05db\u05ea\u05d5\u05d1\u05d5\u05ea IP (192.168.1.1), \u05e8\u05e9\u05ea\u05d5\u05ea IP (192.168.0.0/24) \u05d0\u05d5 \u05d8\u05d5\u05d5\u05d7\u05d9 IP (192.168.1.0-32)."
             }
         }
     },
@@ -31,7 +29,7 @@
                     "interval_seconds": "\u05de\u05e8\u05d5\u05d5\u05d7 \u05d6\u05de\u05df \u05dc\u05e1\u05e8\u05d9\u05e7\u05d4",
                     "scan_options": "\u05d0\u05e4\u05e9\u05e8\u05d5\u05d9\u05d5\u05ea \u05e1\u05e8\u05d9\u05e7\u05d4 \u05d2\u05d5\u05dc\u05de\u05d9\u05d5\u05ea \u05d4\u05e0\u05d9\u05ea\u05e0\u05d5\u05ea \u05dc\u05d4\u05d2\u05d3\u05e8\u05d4 \u05e2\u05d1\u05d5\u05e8 Nmap"
                 },
-                "description": "\u05d4\u05d2\u05d3\u05e8\u05ea \u05de\u05d0\u05e8\u05d7\u05d9\u05dd \u05dc\u05e1\u05e8\u05d9\u05e7\u05d4 \u05e2\u05dc-\u05d9\u05d3\u05d9 Nmap. \u05db\u05ea\u05d5\u05d1\u05ea \u05e8\u05e9\u05ea \u05d5\u05dc\u05d0 \u05e0\u05db\u05dc\u05dc\u05d9\u05dd \u05d9\u05db\u05d5\u05dc\u05d9\u05dd \u05dc\u05d4\u05d9\u05d5\u05ea \u05db\u05ea\u05d5\u05d1\u05d5\u05ea IP (192.168.1.1), \u05e8\u05e9\u05ea\u05d5\u05ea IP (192.168.0.0/24) \u05d0\u05d5 \u05d8\u05d5\u05d5\u05d7\u05d9 IP (192.168.1.0-32)."
+                "description": "\u05d4\u05d2\u05d3\u05e8\u05ea \u05de\u05d0\u05e8\u05d7\u05d9\u05dd \u05dc\u05e1\u05e8\u05d9\u05e7\u05d4 \u05e2\u05dc-\u05d9\u05d3\u05d9 Nmap. \u05db\u05ea\u05d5\u05d1\u05ea IP \u05d5\u05d7\u05e8\u05d9\u05d2\u05d9\u05dd \u05d9\u05db\u05d5\u05dc\u05d9\u05dd \u05dc\u05d4\u05d9\u05d5\u05ea \u05db\u05ea\u05d5\u05d1\u05d5\u05ea IP (192.168.1.1), \u05e8\u05e9\u05ea\u05d5\u05ea IP (192.168.0.0/24) \u05d0\u05d5 \u05d8\u05d5\u05d5\u05d7\u05d9 IP (192.168.1.0-32)."
             }
         }
     }