cgse 2024.7.0__py3-none-any.whl → 2025.0.2__py3-none-any.whl

egse/tcs/tcs_ui.py

@@ -1,543 +0,0 @@
-"""
-A simple GUI which allows to inspect the TCS EGSE configuration and housekeeping.
-
-The GUI window consists of a tabbed view with two tabs.
-
-The Configuration tab shows the configuration at the time the GUI was started or the tab was
-reloaded. The Housekeeping tab shows all the housekeeping values. Whenever a tabs is selected,
-the content is refreshed.
-
-!!! note
-    If you want to use the Configuration tab or the Housekeeping tab, the TCS EGSE must be in
-    Remote Control mode. Use the remote control button in the toolbar.
-
-"""
-import logging
-import multiprocessing
-from pathlib import Path
-
-import sys
-import warnings
-from collections import namedtuple
-from enum import Enum
-
-multiprocessing.current_process().name = "tcs_ui"
-
-from PyQt5 import QtWidgets
-from PyQt5.QtCore import QTimer, QLockFile
-from PyQt5.QtCore import Qt
-from PyQt5.QtGui import QFont
-from PyQt5.QtGui import QIcon
-from PyQt5.QtWidgets import QMainWindow, QMessageBox
-from PyQt5.QtWidgets import QScrollArea
-from PyQt5.QtWidgets import QSizePolicy
-from PyQt5.QtWidgets import QStatusBar
-from PyQt5.QtWidgets import QTabWidget
-from PyQt5.QtWidgets import QTextEdit
-from PyQt5.QtWidgets import QToolBar
-from PyQt5.QtWidgets import QVBoxLayout
-from PyQt5.QtWidgets import QWidget
-from rich.console import Console
-from rich.table import Table
-
-from egse.control import Failure
-from egse.gui.buttons import ToggleButton
-from egse.gui.buttons import TouchButton
-from egse.observer import Observable
-from egse.observer import Observer
-from egse.resource import get_resource
-from egse.tcs.tcs import TCSProxy
-from egse.tcs.tcs import is_tcs_cs_active
-
-MODULE_LOGGER = logging.getLogger(__name__)
-
-CONFIGURATION_TAB = "Configuration"
-HOUSEKEEPING_TAB = "Housekeeping"
-
-ScrollableTextBox = namedtuple("ScrollableTextBox", ["scroll", "text_box"])
-
-
-class Actions(Enum):
-    REFRESH_TAB = "refresh-tab"
-    CLEAR_POPUP = "clear-popup"
-
-
-class TCSUIModel:
-    def __init__(self):
-        super().__init__()
-
-        # FIXME: shall we do some checking for exceptions here?
-        self.device = TCSProxy()
-
-    def read_configuration(self) -> dict:
-        return self.device.get_configuration()
-
-    def read_all_housekeeping(self):
-        return  self.device.get_all_housekeeping()
-
-
-class TCSUIView(QMainWindow, Observable):
-
-    def __init__(self):
-        super().__init__()
-
-        self.setGeometry(600, 100, 1000, 900)
-        self.setWindowTitle('TCS EGSE Viewer')
-
-        self.setStatusBar(QStatusBar(self))
-        self.status = self.statusBar()
-
-        # Instance variables defined and used in the create methods below
-
-        self.cs_connection = None
-        self.device_connection = None
-        self.start_task_button = None
-        self.remote_control_button = None
-        self.reload_button = None
-        self.clear_button = None
-        self.toolbar = None
-
-        self.text_tabs = {
-            CONFIGURATION_TAB: self.create_scrollable_text_box(CONFIGURATION_TAB),
-            HOUSEKEEPING_TAB: self.create_scrollable_text_box(HOUSEKEEPING_TAB)
-        }
-
-        self.tabs = QTabWidget()
-        self.tabs.setDocumentMode(False)
-
-        # self.tabs.currentChanged.connect(self.on_current_tab_changed)
-        self.tabs.tabBarClicked.connect(self.on_current_tab_changed)
-
-        self.tabs.addTab(self.text_tabs[CONFIGURATION_TAB].scroll, CONFIGURATION_TAB)
-        self.tabs.addTab(self.text_tabs[HOUSEKEEPING_TAB].scroll, HOUSEKEEPING_TAB)
-
-        self.setCentralWidget(self.tabs)
-
-        self.create_toolbar()
-
-    def create_toolbar(self):
-
-        icon_width = icon_height = 42
-
-        # Struct is used to add some fixed spacing between the icons
-
-        strut = QWidget()
-        strut.setFixedSize(5, 5)
-
-        # spacer widget to help with aligning some buttons to the right
-
-        spacer = QWidget()
-        spacer.setSizePolicy(QSizePolicy.Expanding, QSizePolicy.Expanding)
-
-        # The Reconnect action is used to reconnect to the control server
-
-        self.cs_connection = ToggleButton(
-            name="CS-CONNECT",
-            width=icon_width, height=icon_height,
-            status_tip="connect-disconnect TCS EGSE control server.",
-            selected=get_resource(":/icons/cs-connected.svg"),
-            not_selected=get_resource(":/icons/cs-not-connected.svg"),
-            disabled=get_resource(":/icons/cs-connected-disabled.svg")
-        )
-        self.cs_connection.clicked.connect(self.on_cs_connection_button_click)
-
-        # The Reconnect action is used to reconnect the device
-
-        self.device_connection = ToggleButton(
-            name="DEVICE-CONNECT",
-            width=icon_width, height=icon_height,
-            status_tip="connect-disconnect the TCS EGSE device controller",
-            selected=get_resource(":/icons/plugged.svg"),
-            not_selected=get_resource(":/icons/unplugged.svg"),
-            disabled=get_resource(":/icons/plugged-disabled.svg")
-        )
-        self.device_connection.clicked.connect(self.on_device_connection_button_click)
-
-        with TCSProxy() as tcs:
-
-            self.start_task_button = ToggleButton(
-                name="START-TASK",
-                width=icon_width, height=icon_height,
-                status_tip="Start/stop task on the TCS EGSE.",
-                selected=get_resource(":/icons/start-button.svg"),
-                not_selected=get_resource(":/icons/stop-button.svg"),
-                disabled=[
-                    get_resource(":/icons/start-button-disabled.svg"),
-                    get_resource(":/icons/stop-button-disabled.svg"),
-                ]
-            )
-            self.start_task_button.clicked.connect(self.on_start_task_button_click)
-            if isinstance(task_is_running := tcs.is_task_running(), Failure):
-                self.start_task_button.disable()
-            else:
-                self.start_task_button.set_selected(not task_is_running)
-
-            self.remote_control_button = ToggleButton(
-                name="REMOTE-CONTROL",
-                width=icon_width, height=icon_height,
-                status_tip="(de-)Activate remote control on the TCS EGSE.",
-                selected=get_resource(":/icons/remote-control-on.svg"),
-                not_selected=get_resource(":/icons/remote-control-off.svg"),
-            )
-            self.remote_control_button.clicked.connect(self.on_remote_control_button_click)
-            self.remote_control_button.set_selected(tcs.is_remote_operation_active())
-
-        self.reload_button = TouchButton(
-            name="RELOAD-TELEMETRY",
-            width=32, height=32,
-            status_tip="Reload the current view: Configuration or Housekeeping.",
-            selected=get_resource(":/icons/repeat-blue.svg"),
-        )
-        self.reload_button.clicked.connect(self.on_reload_button_click)
-
-        self.clear_button = TouchButton(
-            name="CLEAR-MMI-ERROR",
-            width=icon_width, height=icon_height,
-            status_tip="Clear the red box error message on the MMI.",
-            selected=get_resource(":/icons/cleaning.svg"),
-        )
-        self.clear_button.clicked.connect(self.on_clear_button_click)
-
-        self.toolbar = QToolBar("Main Toolbar")
-        self.toolbar.addWidget(self.device_connection)
-        self.toolbar.addWidget(self.cs_connection)
-        self.toolbar.addSeparator()
-        self.toolbar.addWidget(self.start_task_button)
-        self.toolbar.addWidget(strut)
-        self.toolbar.addWidget(self.remote_control_button)
-        self.toolbar.addWidget(strut)
-        self.toolbar.addWidget(self.reload_button)
-        self.toolbar.addWidget(spacer)
-        self.toolbar.addWidget(self.clear_button)
-
-        self.toolbar.setStyleSheet("padding: 5px;")
-
-        # self.toolbar.setStyleSheet("padding-top: 10px; "
-        #                            "padding-bottom: 10px;")
-
-        self.addToolBar(self.toolbar)
-
-    def on_current_tab_changed(self, tab_nr):
-        if tab_nr == -1:
-            return
-        tab_name = self.tabs.tabText(tab_nr)
-        self.actionObservers({Actions.REFRESH_TAB: (tab_nr, tab_name)})
-
-    def on_cs_connection_button_click(self):
-        MODULE_LOGGER.info("Control Server connection button clicked, not yet implemented.")
-
-    def on_device_connection_button_click(self):
-        MODULE_LOGGER.info("Device connection button clicked, not yet implemented.")
-
-    def on_clear_button_click(self):
-
-        self.actionObservers({Actions.CLEAR_POPUP: None})
-
-    def on_reload_button_click(self):
-        """Update the view in the currently selected TAB."""
-
-        tab_nr = self.tabs.currentIndex()
-        tab_name = self.tabs.tabText(tab_nr)
-
-        self.actionObservers({Actions.REFRESH_TAB: (tab_nr, tab_name)})
-
-    def on_remote_control_button_click(self):
-
-        if not is_tcs_cs_active():
-            self.status.showMessage(
-                "TCS EGSE Control Server is not active, check if the `tcs_cs` is running.",
-                msecs=5000
-            )
-            return
-
-        with TCSProxy() as tcs:
-            if tcs.is_remote_operation_active():
-                response = tcs.quit_remote_operation()
-                self.remote_control_button.set_selected(False)
-                self.start_task_button.disable()
-            else:
-                response = tcs.request_remote_operation()
-                self.remote_control_button.set_selected(True)
-                self.start_task_button.enable()
-
-    def on_start_task_button_click(self):
-        """Start / stop a task on the TCS EGSE.
-        This is equivalent to pressing the Start/Stop button on the touch screen of the TCS EGSE.
-        The device must be in remote control mode.
-        """
-
-        if not is_tcs_cs_active():
-            self.status.showMessage(
-                "TCS EGSE Control Server is not active, check if the `tcs_cs` is running.",
-                msecs=5000
-            )
-            return
-
-        with TCSProxy() as tcs:
-            if not tcs.is_remote_operation_active():
-                self.start_task_button.disable()
-                self.status.showMessage(
-                    "TCS EGSE is not in remote control mode, press the remote control button.",
-                    msecs=5000
-                )
-                return
-
-            if tcs.is_task_running():
-                response = tcs.stop_task()
-                # MODULE_LOGGER.info(f"stop_task: {response=}")
-                self.start_task_button.set_selected(True)
-            else:
-                response = tcs.run_task()
-                # MODULE_LOGGER.info(f"run_task: {response=}")
-                self.start_task_button.set_selected(False)
-
-    # TODO: should this function move into egse.gui?
-
-    def create_scrollable_text_box(self, name: str) -> ScrollableTextBox:
-        scroll = QScrollArea()
-        scroll.setObjectName(name)
-        widget = QWidget()
-        vbox = QVBoxLayout()
-
-        text_box: QTextEdit = QTextEdit()
-        text_box.setReadOnly(True)
-        monospaced_font = QFont("Courier New")
-        monospaced_font.setStyleHint(QFont.Monospace)
-        text_box.setFont(monospaced_font)
-        text_box.setLineWrapMode(QTextEdit.NoWrap)
-        vbox.addWidget(text_box)
-
-        widget.setLayout(vbox)
-
-        scroll.setVerticalScrollBarPolicy(Qt.ScrollBarAlwaysOn)
-        scroll.setHorizontalScrollBarPolicy(Qt.ScrollBarAlwaysOn)
-        scroll.setWidgetResizable(True)
-        scroll.setWidget(widget)
-
-        return ScrollableTextBox(scroll, text_box)
-
-    def get_tab_nr(self, tab_name: str) -> int:
-        """Find the index for the TAB with the given name."""
-        for index in range(self.tabs.count()):
-            if tab_name == self.tabs.tabText(index):
-                return index
-
-    def set_text_for_tab(self, tab_id: str, text: str, preserve_scroll: bool = True):
-        """Set the text in the TAB with tab_id. The TAB is expected to be a ScrollableTextBox.
-
-        Args:
-            tab_id: the identification for the TAB. This is the name of the TAB.
-            text: the replacement text to be shown in the TAB
-            preserve_scroll: show the test from the start or preserve the current scroll position
-        """
-
-        widget: ScrollableTextBox = self.text_tabs[tab_id]
-        text_box: QTextEdit = widget.text_box
-
-        if preserve_scroll:
-            vsb = text_box.verticalScrollBar()
-            old_pos_ratio = vsb.value() / (vsb.maximum() or 1)
-
-            text_box.setText(text)
-
-            vsb.setValue(round(old_pos_ratio * vsb.maximum()))
-        else:
-            text_box.setText(text)
-
-
-class TCSUIController(Observer):
-    def __init__(self, model: TCSUIModel, view: TCSUIView):
-        super().__init__()
-        self._model = model
-        self._view = view
-        self._view.addObserver(self)
-
-        self.hk_capture_timer = None
-        self.remote_button_update_timer = None
-
-        self.update_housekeeping_view()
-        self.update_configuration_view()
-
-        self.create_timer()
-
-    def update(self, changed_object):
-        pass
-
-    def do(self, actions):
-
-        for action, value in actions.items():
-            # MODULE_LOGGER.info(f"Action requested: do {action} with {value=}")
-            if action == Actions.REFRESH_TAB:
-                self.do_refresh_tab(tab_nr=value[0], tab_name=value[1])
-            elif action == Actions.CLEAR_POPUP:
-                self.do_clear_popup()
-
-    def do_refresh_tab(self, tab_nr: int, tab_name: str):
-        if tab_name == CONFIGURATION_TAB:
-            self.update_configuration_view()
-            self.stop_timer()
-        elif tab_name == HOUSEKEEPING_TAB:
-            self.update_housekeeping_view()
-            self.start_timer()
-        else:
-            warnings.warn(
-                f"Unknown TAB name passed into the refresh method in the UI Controller {tab_name}.")
-
-    def do_clear_popup(self):
-        if not is_tcs_cs_active():
-            return
-
-        with TCSProxy() as tcs:
-            if tcs.is_remote_operation_active():
-                tcs.clear_popup()
-
-        self._view.status.showMessage("Popup has been cleared on MMI.", 2000)
-
-    def update_configuration_view(self):
-
-        if not is_tcs_cs_active():
-            self._view.set_text_for_tab(
-                CONFIGURATION_TAB,
-                "TCS EGSE Control Server is not active, check if the `tcs_cs` is running."
-            )
-            return
-
-        tcs_conf = self._model.read_configuration()
-
-        if isinstance(tcs_conf, Failure):
-            self._view.set_text_for_tab(
-                CONFIGURATION_TAB,
-                "Could not retrieve the configuration of the TCS EGSE.\n"
-                "Check if the TCS EGSE is in Remote Control mode."
-            )
-            return
-
-        table = Table(title="Configuration Parameters")
-
-        table.add_column("Name", justify="left", style="cyan", no_wrap=True)
-        table.add_column("Value", justify="right", style="green")
-
-        for name, value in sorted(tcs_conf.items()):
-            table.add_row(name, value)
-
-        console = Console(force_terminal=False, force_jupyter=False)
-        with console.capture() as capture:
-            console.print(table)
-        text = capture.get()
-
-        self._view.set_text_for_tab(CONFIGURATION_TAB, text, preserve_scroll=True)
-
-    def update_housekeeping_view(self):
-
-        if not is_tcs_cs_active():
-            self._view.set_text_for_tab(
-                HOUSEKEEPING_TAB,
-                "TCS EGSE Control Server is not active, check if the `tcs_cs` is running."
-            )
-            return
-
-        all_hk = self._model.read_all_housekeeping()
-
-        if isinstance(all_hk, Failure):
-            logging.warning(f"Communication error: {all_hk}")
-            self._view.status.showMessage("Communication failure with TCS EGSE", 5000)
-            self._view.set_text_for_tab(
-                HOUSEKEEPING_TAB,
-                "Could not retrieve housekeeping from the TCS EGSE.\n"
-                "Check if the TCS EGSE is in Remote Control mode."
-            )
-            return
-
-        table = Table(title="All Housekeeping parameters", width=120)
-
-        table.add_column("Timestamp", justify="center", style="black", no_wrap=True)
-        table.add_column("Name", justify="left", style="cyan", no_wrap=True)
-        table.add_column("Value", justify="right", style="green", no_wrap=False)
-
-        for hk_entry in all_hk:
-            try:
-                table.add_row(hk_entry[0], hk_entry[1], hk_entry[2])
-            except IndexError:
-                # FIXME: view should have a method for this
-                self._view.status.showMessage('Incorrect format for housekeeping data', 2000)
-                logging.warning(f"Incorrect format for housekeeping data: {hk_entry=}")
-
-        console = Console(width=120, force_terminal=False, force_jupyter=False)
-        with console.capture() as capture:
-            console.print(table)
-        text = capture.get()
-
-        self._view.set_text_for_tab(HOUSEKEEPING_TAB, text, preserve_scroll=True)
-
-    def update_state_of_buttons(self):
-
-        if not is_tcs_cs_active():
-            return
-
-        with TCSProxy() as tcs:
-            self._view.remote_control_button.set_selected(tcs.is_remote_operation_active())
-            if tcs.is_remote_operation_active():
-                task_is_running = tcs.is_task_running()
-                if isinstance(task_is_running, Failure):
-                    self._view.status.showMessage(task_is_running.message, 2000)
-                    self._view.start_task_button.disable()
-                else:
-                    self._view.start_task_button.enable()
-                    self._view.start_task_button.set_selected(not task_is_running)
-
-    def create_timer(self):
-        """Create a Timer that will update the Housekeeping every second."""
-
-        self.hk_capture_timer = QTimer()
-
-        self.hk_capture_timer.timeout.connect(self.update_housekeeping_view)
-        self.hk_capture_timer.setInterval(10000)
-
-        self.remote_button_update_timer = QTimer()
-        self.remote_button_update_timer.timeout.connect(self.update_state_of_buttons)
-        self.remote_button_update_timer.setInterval(500)  #
-        self.remote_button_update_timer.start()
-
-    def start_timer(self):
-        self.hk_capture_timer.start()
-
-    def stop_timer(self):
-        self.hk_capture_timer.stop()
-
-
-def main():
-
-    if not is_tcs_cs_active():
-        print("ERROR: TCS CS is not active, "
-              "start the TCS control server before launching this GUI.")
-        sys.exit(1)
-
-    lock_file = QLockFile(str(Path("~/tcs_ui.app.lock").expanduser()))
-
-    app_logo = get_resource(":/icons/logo-tcs.svg")
-
-    app = QtWidgets.QApplication(sys.argv)
-    app.setWindowIcon(QIcon(str(app_logo)))
-
-    if lock_file.tryLock(100):
-
-        view = TCSUIView()
-        model = TCSUIModel()
-
-        TCSUIController(model, view)
-
-        view.show()
-
-        return app.exec()
-    else:
-        error_message = QMessageBox()
-        error_message.setIcon(QMessageBox.Warning)
-        error_message.setWindowTitle("Error")
-        error_message.setText("The TCS GUI application is already running!")
-        error_message.setStandardButtons(QMessageBox.Ok)
-
-        return error_message.exec()
-
-
-if __name__ == '__main__':
-    sys.exit(main())