romdev-mcp 0.1.1

package/src/platforms/snes/lib/pvsneslib/include/snes/pixel.h

@@ -0,0 +1,53 @@
+/*---------------------------------------------------------------------------------
+
+    mixel mode for mode 0
+
+    Copyright (C) 2012-2013
+        Alekmaul
+
+    This software is provided 'as-is', without any express or implied
+    warranty.  In no event will the authors be held liable for any
+    damages arising from the use of this software.
+
+    Permission is granted to anyone to use this software for any
+    purpose, including commercial applications, and to alter it and
+    redistribute it freely, subject to the following restrictions:
+
+    1.	The origin of this software must not be misrepresented; you
+        must not claim that you wrote the original software. If you use
+        this software in a product, an acknowledgment in the product
+        documentation would be appreciated but is not required.
+    2.	Altered source versions must be plainly marked as such, and
+        must not be misrepresented as being the original software.
+    3.	This notice may not be removed or altered from any source
+        distribution.
+
+---------------------------------------------------------------------------------*/
+
+/*!	\file pixel.h
+    \brief contains the basic definitions for doing a pixel per pixel mode for SNES.
+    \brief map entry is 0x5800 and tiles entry is 0x6000 for 14K bytes !
+    \brief so don't use graphics after 0x5800
+    \brief this pixel mode uses SNES mode 0 so only 3 colors can be used
+
+*/
+#ifndef SNES_PIXEL_INCLUDE
+#define SNES_PIXEL_INCLUDE
+
+#include <snes/snestypes.h>
+
+/*!	\fn pixSetPixel(u8 x,u8 y, u8 color)
+    \brief Draw a dot
+    \param x x coordinate of dot
+    \param y y coordinate of dot
+    \param color color of pixel (must be 1, 2 or 3)
+*/
+void pixSetPixel(u8 x, u8 y, u8 color);
+
+/*!	\fn pixSetMode(u8 *pixPalette)
+    \brief Init pixel mode with SNES mode 0
+    \param pixPalette address of palette entry
+*/
+void pixSetMode(u8 *pixPalette);
+
+#endif

package/src/platforms/snes/lib/pvsneslib/include/snes/scores.h

@@ -0,0 +1,66 @@
+/*---------------------------------------------------------------------------------
+
+    Copyright (C) 2012-2020
+        Alekmaul
+
+
+    This software is provided 'as-is', without any express or implied
+    warranty.  In no event will the authors be held liable for any
+    damages arising from the use of this software.
+
+    Permission is granted to anyone to use this software for any
+    purpose, including commercial applications, and to alter it and
+    redistribute it freely, subject to the following restrictions:
+
+    1.	The origin of this software must not be misrepresented; you
+        must not claim that you wrote the original software. If you use
+        this software in a product, an acknowledgment in the product
+        documentation would be appreciated but is not required.
+
+    2.	Altered source versions must be plainly marked as such, and
+        must not be misrepresented as being the original software.
+
+    3.	This notice may not be removed or altered from any source
+        distribution.
+
+---------------------------------------------------------------------------------*/
+/*! \file scores.h
+\brief Wrapper functions for score management
+
+*/
+#ifndef SNES_SCORE_INCLUDE
+#define SNES_SCORE_INCLUDE
+
+#include <snes/snestypes.h>
+
+typedef struct
+{
+    u16 scolo;
+    u16 scohi;
+} scoMemory;
+
+/*! \brief clear a score memory
+    \param source the source to clear from
+*/
+void scoreClear(scoMemory *source);
+
+/*! \brief add a value to a score memory
+    \param source the source to clear from
+    \param value the value to add
+*/
+void scoreAdd(scoMemory *source, u16 value);
+
+/*! \brief copy a score memory to another score memory
+    \param source the source to copy from
+    \param dest the destination to copy to
+*/
+void scoreCpy(scoMemory *source, scoMemory *dest);
+
+/*! \brief compare a score memory to another score memory
+    \param source the source to compare from
+    \param dest the destination to compare to
+    \return	0 if equals, 0xFF if source greater than destination, 1 otherwise
+*/
+u8 scoreCmp(scoMemory *source, scoMemory *dest);
+
+#endif // SNES_SCORE_INCLUDE

package/src/platforms/snes/lib/pvsneslib/include/snes/snestypes.h

@@ -0,0 +1,65 @@
+/*---------------------------------------------------------------------------------
+
+    snestypes.h -- Common types (and a few useful macros)
+
+    Copyright (C) 2012-2013
+        Alekmaul
+
+    This software is provided 'as-is', without any express or implied
+    warranty.  In no event will the authors be held liable for any
+    damages arising from the use of this software.
+
+    Permission is granted to anyone to use this software for any
+    purpose, including commercial applications, and to alter it and
+    redistribute it freely, subject to the following restrictions:
+
+    1.	The origin of this software must not be misrepresented; you
+        must not claim that you wrote the original software. If you use
+        this software in a product, an acknowledgment in the product
+        documentation would be appreciated but is not required.
+    2.	Altered source versions must be plainly marked as such, and
+        must not be misrepresented as being the original software.
+    3.	This notice may not be removed or altered from any source
+        distribution.
+
+---------------------------------------------------------------------------------*/
+/*! \file snestypes.h
+    \brief Custom types used by libsnes
+*/
+
+#ifndef _SNESTYPES_INCLUDE
+#define _SNESTYPES_INCLUDE
+
+//! bit field
+#define BIT(n) (1 << n)
+
+//! 8 bit volatile unsigned integer.
+typedef signed char s8;
+typedef unsigned char u8;
+typedef signed short s16;
+typedef unsigned short u16;
+typedef signed long long s32;
+typedef unsigned long long u32;
+
+typedef volatile unsigned char vuint8;
+typedef volatile unsigned short vuint16;
+typedef volatile unsigned long long vuint32;
+typedef volatile char vint8;
+typedef volatile short vint16;
+typedef volatile long long vint32;
+
+// Handy function pointer typedefs
+//! a function pointer that takes no arguments and doesn't return anything.
+typedef void (*VoidFn)(void);
+
+//! boolean definitions
+typedef unsigned char bool;
+#define FALSE 0
+#define TRUE 0xff
+#define false 0
+#define true 0xff
+
+//! stdio definitions
+#define NULL 0
+
+#endif

package/src/platforms/snes/lib/pvsneslib/include/snes/sound.h

@@ -0,0 +1,245 @@
+/*---------------------------------------------------------------------------------
+
+    Sound functions.
+
+    Copyright (C) 2012-2023
+        Alekmaul
+
+    This software is provided 'as-is', without any express or implied
+    warranty.  In no event will the authors be held liable for any
+    damages arising from the use of this software.
+
+    Permission is granted to anyone to use this software for any
+    purpose, including commercial applications, and to alter it and
+    redistribute it freely, subject to the following restrictions:
+
+    1.	The origin of this software must not be misrepresented; you
+        must not claim that you wrote the original software. If you use
+        this software in a product, an acknowledgment in the product
+        documentation would be appreciated but is not required.
+    2.	Altered source versions must be plainly marked as such, and
+        must not be misrepresented as being the original software.
+    3.	This notice may not be removed or altered from any source
+        distribution.
+
+
+---------------------------------------------------------------------------------*/
+
+/*! \file sound.h
+    \brief snes sound support.
+
+    Really great thanks to shiru for sound engine and tools used in his Christmas Craze
+    homebrew
+    http://shiru.untergrund.net/
+
+    Also great thanks for mukunda for snesmod sound engine
+    http://snes.mukunda.com/
+
+    And special thanks to Kung Fu Furby for help debugging snesmod port with C interface
+*/
+
+#ifndef SNES_SOUND_INCLUDE
+#define SNES_SOUND_INCLUDE
+
+#include <snes/snestypes.h>
+#include <snes/interrupt.h>
+
+/*!	\struct brrsamples
+    \brief brr sample sound header(8 bytes)
+*/
+typedef struct
+{
+    u8 pitch;   /*!< default PITCH (1..6) (hz = PITCH * 2000) */
+    u8 panning; /*!< default PANNING (0..15) */
+    u8 volume;  /*!< default VOLUME (0..15) */
+    u8 length1; /*!< number of BRR chunks (BYTELEN/9) (max 4kilobytes??) low */
+    u8 length2; /*!< number of BRR chunks (BYTELEN/9) (max 4kilobytes??) high */
+    u8 addr1;   /*!< address of BRR data low */
+    u8 addr2;   /*!< address of BRR data high */
+    u8 bank;    /*!< bank of BRR data */
+} brrsamples;
+
+/*! \def REG_APU00
+    \brief Main CPU to Sound CPU Communication Port 0 (R/W)
+    7-0   APU I/O Data   (Write: Data to APU, Read: Data from APU)
+    Caution: These registers should be written only in 8bit mode (there is a hardware
+    glitch that can cause a 16bit write to [2140h..2141h] to destroy [2143h], this
+    might happen only in some situations, like when the cartridge contains too
+    many ROM chips which apply too much load on the bus).
+
+    Same thing for REG_APU01, REG_APU02 and REG_APU03 for addr 2141h..2143h
+    REG_APU0001 and REG_APU0203 for 16 bits read/write access
+*/
+#define REG_APU00 (*(vuint8 *)0x2140)
+#define REG_APU01 (*(vuint8 *)0x2141)
+#define REG_APU02 (*(vuint8 *)0x2142)
+#define REG_APU03 (*(vuint8 *)0x2143)
+#define REG_APU0001 (*(vuint16 *)0x2140)
+#define REG_APU0203 (*(vuint16 *)0x2142)
+
+/*! \fn  spcBoot(void)
+    \brief boots the spc700 with sm-spc. call once at startup
+    disable time consuing interrupts during this function
+*/
+void spcBoot(void);
+
+/*! \fn  spcSetBank(u8 *bank)
+    \brief set soundbank origin. soundbank must have dedicated bank(s)
+    \param bank	bank address
+*/
+void spcSetBank(u8 *bank);
+
+/*! \fn  spcLoad(u16 musIndex)
+    \brief load module into sm-spc. this function may take some time to execute
+    \param musIndex	module_id
+*/
+void spcLoad(u16 musIndex);
+
+/*! \fn  spcLoadEffect(u16 sfxIndex)
+    \brief load sound effect into sm-spc. this function may take some time to execute
+    \param sfxIndex	sfx_id
+*/
+void spcLoadEffect(u16 sfxIndex);
+
+/*! \fn  spcPlay(u8 startPos)
+    \brief play module.
+    note: this simply queues a message, use spcFlush if you want
+    to wait until the message is processed
+
+    another note: there may be a significant startup time from
+    after the message is processed to when the song starts playing...
+    to sync the program with the song start use spcFlush and then
+    wait until SPC_P of the status register is set.
+    \param startPos	starting position
+*/
+void spcPlay(u8 startPos);
+
+/*! \fn  spcStop(void)
+    \brief stop playing the current module.
+*/
+void spcStop(void);
+
+/*! \fn  spcPauseMusic(void)
+    \brief pause playing the current module and save the music position.
+*/
+void spcPauseMusic(void);
+
+/*! \fn  spcResumeMusic(void)
+    \brief Resume playing of current module at music position.
+
+    spcPauseMusic has to be call before to restore correct position.
+*/
+void spcResumeMusic(void);
+
+/*! \fn  spcSetModuleVolume(u8 vol)
+    \brief set the module playback volume
+    \param vol	volume (0..255)
+*/
+void spcSetModuleVolume(u8 vol);
+
+/*! \fn  spcFadeModuleVolume(u16 vol, u16 fadespeed)
+    \brief fade the module volume towards the target
+    \param vol	volume (0..255)
+    \param fadespeed	fade speed (volume(0..255) += y every 32ms)
+*/
+void spcFadeModuleVolume(u16 vol, u16 fadespeed);
+
+/*! \fn  spcFlush(void)
+    \brief Flush message queue (force sync)
+*/
+void spcFlush(void);
+
+/*! \fn  spcProcess(void)
+    \brief Process messages
+    This function will try to give messages to the spc until a few
+    scanlines pass
+
+    this function MUST be called every frame if you are using
+    streamed sounds
+*/
+void spcProcess(void);
+
+/*! \fn  spcEffect(u16 pitch,u16 sfxIndex, u8 volpan)
+    \brief Play sound effect (load with spcLoadEffect)
+    \param pitch	pitch (0-15, 1=4Khz , 2=8khz, 4=16Khz, 8=32Khz)
+    \param sfxIndex	effect index (0-15)
+    \param volpan	volume(0..15) AND panning(0..15) (volume*16+pan)
+*/
+void spcEffect(u16 pitch, u16 sfxIndex, u8 volpan);
+
+/*! \fn  spcGetMusicPosition(void)
+    \brief Get current running pattern
+    \return current pattern
+*/
+u8 spcGetMusicPosition(void);
+
+/*! \fn  spcSetSoundTable(u16 sndTableAddr,u8 sndTableBank)
+    \brief set the address of the SOUND TABLE
+    \param sndTableAddr	address of sound table
+    \param sndTableBank	bank of sound table
+*/
+void spcSetSoundTable(u16 sndTableAddr, u8 sndTableBank);
+
+/*! \fn spcSetSoundEntry(u8 vol, u8 panning, u8 pitch, u16 length, u8 *sampleaddr, brrsamples *ptr)
+    \brief set the values and address of the SOUND TABLE for a sound entry
+    \param vol	volume (0..15)
+    \param panning	panning (0..15)
+    \param pitch	PITCH (1..6) (hz = PITCH * 2000)
+    \param length	length of brr sample
+    \param sampleaddr	address of brr sample
+    \param ptr	address of variable where sounds values will be stored
+*/
+void spcSetSoundEntry(u8 vol, u8 panning, u8 pitch, u16 length, u8 *sampleaddr, brrsamples *ptr);
+
+/*! \fn spcSetSoundDataEntry(u8 vol, u8 panning, u8 pitch, u16 length, u8 *sampleaddr, brrsamples *ptr)
+    \brief set the values of a sound entry
+    \param vol	volume (0..15)
+    \param panning	panning (0..15)
+    \param pitch	PITCH (1..6) (hz = PITCH * 2000)
+    \param length	length of brr sample
+    \param sampleaddr	address of brr sample
+    \param ptr	address of variable where sounds values will be stored
+*/
+void spcSetSoundDataEntry(u8 vol, u8 panning, u8 pitch, u16 length, u8 *sampleaddr, brrsamples *ptr);
+
+//---------------------------------------------------------------------------------
+/*! \fn spcSetSoundDataEntry(u8 vol, u8 panning, u8 pitch, u16 length, u8 *sampleaddr, brrsamples *ptr)
+    \brief set the address of the SOUND TABLE for a sound entry
+    \param vol	volume (0..15)
+    \param panning	panning (0..15)
+    \param pitch	PITCH (1..6) (hz = PITCH * 2000)
+    \param length	length of brr sample
+    \param sampleaddr	address of brr sample
+    \param ptr	address of variable where sounds values will be stored
+*/
+void spcSetSoundTableEntry(brrsamples *ptr);
+
+/*! \fn  spcAllocateSoundRegion(u8 size);
+    \brief Set the size of the sound region.
+
+    Use it only if you are playing effects with BRR files. If not, just allocate the value 0 by calling spcAllocateSoundRegion(0);
+
+    The value must be big enough to hold your longest/largest sound.
+    This function will STOP module playback too.
+    \param size	size of sound region (size*256 bytes)
+*/
+void spcAllocateSoundRegion(u8 size);
+
+/*! \fn  spcPlaySound(u8 sndIndex)
+    \brief Play sound from memory (using default arguments)
+    \param sndIndex	index in sound table.
+    Be careful: the index 0 corresponds to the LAST sound loaded.
+    The index 1 is the penultimate sound loaded and so on...
+*/
+void spcPlaySound(u8 sndIndex);
+
+/*! \fn  spcPlaySoundV(u8 sndIndex, u16 volume)
+    \brief Play sound from memory (using default arguments)
+    \param sndIndex	index in sound table.
+    Be careful: the index 0 corresponds to the LAST sound loaded.
+    The index 1 is the penultimate sound loaded and so on...
+    \param volume	volume (0..15)
+*/
+void spcPlaySoundV(u8 sndIndex, u16 volume);
+
+#endif // SNES_SOUND_INCLUDE