formulab 0.1.0

package/dist/construction/stair.js

@@ -0,0 +1,69 @@
+import { roundTo } from '../utils.js';
+// Default comfortable riser height range: 150-180mm
+const MIN_RISER = 150;
+const MAX_RISER = 180;
+const DEFAULT_RISER = 170; // Target riser height for auto-calculation
+/**
+ * Calculate stair dimensions
+ *
+ * Formulas:
+ * - Number of risers = totalRise / riserHeight (rounded)
+ * - Number of treads = risers - 1
+ * - Tread depth = totalRun / numberOfTreads
+ * - Stringer length = sqrt(totalRise² + totalRun²)
+ * - 2R + T comfort formula (should be 600-650mm for comfortable stairs)
+ * - Total angle = atan2(totalRise, totalRun) × (180 / π)
+ *
+ * @param input - Stair input parameters
+ * @returns Stair calculation results
+ */
+export function stair(input) {
+    const { totalRise, totalRun, riserHeight } = input;
+    let numberOfRisers;
+    let actualRiserHeight;
+    if (riserHeight && riserHeight > 0) {
+        // Use specified riser height
+        numberOfRisers = Math.round(totalRise / riserHeight);
+        actualRiserHeight = totalRise / numberOfRisers;
+    }
+    else {
+        // Auto-calculate optimal riser count based on target riser height
+        numberOfRisers = Math.round(totalRise / DEFAULT_RISER);
+        if (numberOfRisers < 1)
+            numberOfRisers = 1;
+        actualRiserHeight = totalRise / numberOfRisers;
+        // Adjust if outside comfortable range
+        if (actualRiserHeight > MAX_RISER) {
+            numberOfRisers = Math.ceil(totalRise / MAX_RISER);
+            actualRiserHeight = totalRise / numberOfRisers;
+        }
+        else if (actualRiserHeight < MIN_RISER && numberOfRisers > 1) {
+            numberOfRisers = Math.floor(totalRise / MIN_RISER);
+            if (numberOfRisers < 1)
+                numberOfRisers = 1;
+            actualRiserHeight = totalRise / numberOfRisers;
+        }
+    }
+    // Number of treads = risers - 1 (bottom step is floor level)
+    const numberOfTreads = numberOfRisers - 1;
+    // Tread depth = total run / number of treads
+    const treadDepth = numberOfTreads > 0 ? totalRun / numberOfTreads : 0;
+    // Stringer length = sqrt(totalRise² + totalRun²)
+    const stringerLength = Math.sqrt(totalRise * totalRise + totalRun * totalRun);
+    // 2R + T comfort formula (should be 600-650mm for comfortable stairs)
+    const twoRPlusT = 2 * actualRiserHeight + treadDepth;
+    const codeCompliant = twoRPlusT >= 600 && twoRPlusT <= 650;
+    // Calculate stair angle
+    const totalAngle = Math.atan2(totalRise, totalRun) * (180 / Math.PI);
+    return {
+        numberOfRisers,
+        numberOfTreads,
+        actualRiserHeight: roundTo(actualRiserHeight, 1),
+        treadDepth: roundTo(treadDepth, 1),
+        stringerLength: roundTo(stringerLength, 1),
+        twoRPlusT: roundTo(twoRPlusT, 1),
+        codeCompliant,
+        totalAngle: roundTo(totalAngle, 1),
+    };
+}
+//# sourceMappingURL=stair.js.map

package/dist/construction/stair.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"stair.js","sourceRoot":"","sources":["../../src/construction/stair.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,OAAO,EAAE,MAAM,aAAa,CAAC;AAEtC,oDAAoD;AACpD,MAAM,SAAS,GAAG,GAAG,CAAC;AACtB,MAAM,SAAS,GAAG,GAAG,CAAC;AACtB,MAAM,aAAa,GAAG,GAAG,CAAC,CAAC,2CAA2C;AAEtE;;;;;;;;;;;;;GAaG;AACH,MAAM,UAAU,KAAK,CAAC,KAAiB;IACrC,MAAM,EAAE,SAAS,EAAE,QAAQ,EAAE,WAAW,EAAE,GAAG,KAAK,CAAC;IAEnD,IAAI,cAAsB,CAAC;IAC3B,IAAI,iBAAyB,CAAC;IAE9B,IAAI,WAAW,IAAI,WAAW,GAAG,CAAC,EAAE,CAAC;QACnC,6BAA6B;QAC7B,cAAc,GAAG,IAAI,CAAC,KAAK,CAAC,SAAS,GAAG,WAAW,CAAC,CAAC;QACrD,iBAAiB,GAAG,SAAS,GAAG,cAAc,CAAC;IACjD,CAAC;SAAM,CAAC;QACN,kEAAkE;QAClE,cAAc,GAAG,IAAI,CAAC,KAAK,CAAC,SAAS,GAAG,aAAa,CAAC,CAAC;QACvD,IAAI,cAAc,GAAG,CAAC;YAAE,cAAc,GAAG,CAAC,CAAC;QAC3C,iBAAiB,GAAG,SAAS,GAAG,cAAc,CAAC;QAE/C,sCAAsC;QACtC,IAAI,iBAAiB,GAAG,SAAS,EAAE,CAAC;YAClC,cAAc,GAAG,IAAI,CAAC,IAAI,CAAC,SAAS,GAAG,SAAS,CAAC,CAAC;YAClD,iBAAiB,GAAG,SAAS,GAAG,cAAc,CAAC;QACjD,CAAC;aAAM,IAAI,iBAAiB,GAAG,SAAS,IAAI,cAAc,GAAG,CAAC,EAAE,CAAC;YAC/D,cAAc,GAAG,IAAI,CAAC,KAAK,CAAC,SAAS,GAAG,SAAS,CAAC,CAAC;YACnD,IAAI,cAAc,GAAG,CAAC;gBAAE,cAAc,GAAG,CAAC,CAAC;YAC3C,iBAAiB,GAAG,SAAS,GAAG,cAAc,CAAC;QACjD,CAAC;IACH,CAAC;IAED,6DAA6D;IAC7D,MAAM,cAAc,GAAG,cAAc,GAAG,CAAC,CAAC;IAE1C,6CAA6C;IAC7C,MAAM,UAAU,GAAG,cAAc,GAAG,CAAC,CAAC,CAAC,CAAC,QAAQ,GAAG,cAAc,CAAC,CAAC,CAAC,CAAC,CAAC;IAEtE,iDAAiD;IACjD,MAAM,cAAc,GAAG,IAAI,CAAC,IAAI,CAAC,SAAS,GAAG,SAAS,GAAG,QAAQ,GAAG,QAAQ,CAAC,CAAC;IAE9E,sEAAsE;IACtE,MAAM,SAAS,GAAG,CAAC,GAAG,iBAAiB,GAAG,UAAU,CAAC;IACrD,MAAM,aAAa,GAAG,SAAS,IAAI,GAAG,IAAI,SAAS,IAAI,GAAG,CAAC;IAE3D,wBAAwB;IACxB,MAAM,UAAU,GAAG,IAAI,CAAC,KAAK,CAAC,SAAS,EAAE,QAAQ,CAAC,GAAG,CAAC,GAAG,GAAG,IAAI,CAAC,EAAE,CAAC,CAAC;IAErE,OAAO;QACL,cAAc;QACd,cAAc;QACd,iBAAiB,EAAE,OAAO,CAAC,iBAAiB,EAAE,CAAC,CAAC;QAChD,UAAU,EAAE,OAAO,CAAC,UAAU,EAAE,CAAC,CAAC;QAClC,cAAc,EAAE,OAAO,CAAC,cAAc,EAAE,CAAC,CAAC;QAC1C,SAAS,EAAE,OAAO,CAAC,SAAS,EAAE,CAAC,CAAC;QAChC,aAAa;QACb,UAAU,EAAE,OAAO,CAAC,UAAU,EAAE,CAAC,CAAC;KACnC,CAAC;AACJ,CAAC"}

package/dist/construction/types.d.ts

@@ -0,0 +1,219 @@
+/**
+ * Beam Load Calculation Types
+ */
+export type LoadType = 'uniform' | 'concentrated' | 'combined';
+export type BeamSupport = 'simple' | 'cantilever' | 'fixed';
+export interface LoadInput {
+    loadType: LoadType;
+    support: BeamSupport;
+    span: number;
+    uniformLoad?: number;
+    pointLoad?: number;
+    pointPosition?: number;
+}
+export interface LoadResult {
+    maxMoment: number;
+    maxShear: number;
+    maxDeflectionCoeff: number;
+    reactionLeft: number;
+    reactionRight: number;
+    momentAtPoint?: number;
+}
+/**
+ * Concrete Mix Design Types
+ */
+export type ConcreteGrade = '15' | '20' | '25' | '30' | '35' | '40';
+export interface ConcreteInput {
+    grade: ConcreteGrade;
+    volume: number;
+}
+export interface ConcreteResult {
+    cement: number;
+    sand: number;
+    gravel: number;
+    water: number;
+    ratio: string;
+}
+/**
+ * Earthwork Volume Types
+ */
+export interface EarthworkInput {
+    length: number;
+    width: number;
+    depth: number;
+    swellFactor: number;
+    shrinkFactor: number;
+}
+export interface EarthworkResult {
+    bankVolume: number;
+    looseVolume: number;
+    compactedVolume: number;
+}
+/**
+ * Formwork Area Types
+ */
+export type ElementType = 'column' | 'beam' | 'slab' | 'wall' | 'footing';
+export interface FormworkInput {
+    elementType: ElementType;
+    length: number;
+    width: number;
+    height: number;
+    quantity: number;
+    reuses: number;
+}
+export interface FormworkResult {
+    singleAreaSqm: number;
+    totalAreaSqm: number;
+    effectiveAreaSqm: number;
+    plywoodSheets: number;
+}
+/**
+ * Rebar Weight Calculation Types
+ */
+export type RebarSize = 'D10' | 'D13' | 'D16' | 'D19' | 'D22' | 'D25' | 'D29' | 'D32';
+export interface RebarInput {
+    size: RebarSize;
+    length: number;
+    quantity: number;
+}
+export interface RebarResult {
+    unitWeight: number;
+    totalLength: number;
+    totalWeight: number;
+}
+/**
+ * Slope Conversion Types
+ */
+export type SlopeUnit = 'percent' | 'degrees' | 'ratio';
+export interface SlopeInput {
+    fromUnit: SlopeUnit;
+    value: number;
+}
+export interface SlopeResult {
+    percent: number;
+    degrees: number;
+    ratio: number;
+    risePerMeter: number;
+}
+/**
+ * Aggregate Calculation Types
+ */
+export type AggregateType = 'gravel' | 'sand' | 'crushed_stone' | 'topsoil' | 'mulch' | 'custom';
+export interface AggregateDensity {
+    type: AggregateType;
+    density: number;
+    label: string;
+}
+export interface AggregateInput {
+    length: number;
+    width: number;
+    depth: number;
+    depthUnit: 'meters' | 'centimeters';
+    aggregateType: AggregateType;
+    customDensity?: number;
+}
+export interface AggregateResult {
+    volume: number;
+    weight: number;
+    weightTonnes: number;
+    coverageArea: number;
+    density: number;
+    bags20kg: number;
+    bags25kg: number;
+}
+/**
+ * Brick Calculation Types
+ */
+export type BrickSize = 'modular' | 'standard' | 'queen' | 'king' | 'custom';
+export interface BrickDimensions {
+    length: number;
+    height: number;
+}
+export interface BrickInput {
+    wallArea: number;
+    brickSize: BrickSize;
+    customLength?: number;
+    customHeight?: number;
+    mortarThickness: number;
+    wasteFactor: number;
+}
+export interface BrickResult {
+    bricksPerSqMeter: number;
+    totalBricks: number;
+    bricksWithoutWaste: number;
+    wastedBricks: number;
+}
+/**
+ * PERT (Program Evaluation and Review Technique) Types
+ */
+export interface PertTask {
+    id: string;
+    name: string;
+    predecessors: string[];
+    optimistic: number;
+    mostLikely: number;
+    pessimistic: number;
+}
+export interface PertInput {
+    tasks: PertTask[];
+    deadline?: number;
+}
+export interface PertTaskResult {
+    id: string;
+    name: string;
+    duration: number;
+    variance: number;
+    es: number;
+    ef: number;
+    ls: number;
+    lf: number;
+    totalFloat: number;
+    freeFloat: number;
+    isCritical: boolean;
+}
+export interface PertResult {
+    tasks: PertTaskResult[];
+    criticalPath: string[];
+    projectDuration: number;
+    projectVariance: number;
+    projectStdDev: number;
+    zScore?: number;
+    completionProbability?: number;
+}
+/**
+ * Roof Calculation Types
+ */
+export interface RoofInput {
+    rise: number;
+    run: number;
+    footprintLength: number;
+    footprintWidth: number;
+}
+export interface RoofResult {
+    slopeRatio: string;
+    slopeDegrees: number;
+    slopePercent: number;
+    rafterLength: number;
+    slopeFactor: number;
+    roofArea: number;
+    pitchDescription: string;
+}
+/**
+ * Stair Calculation Types
+ */
+export interface StairInput {
+    totalRise: number;
+    totalRun: number;
+    riserHeight?: number;
+}
+export interface StairResult {
+    numberOfRisers: number;
+    numberOfTreads: number;
+    actualRiserHeight: number;
+    treadDepth: number;
+    stringerLength: number;
+    twoRPlusT: number;
+    codeCompliant: boolean;
+    totalAngle: number;
+}
+//# sourceMappingURL=types.d.ts.map

package/dist/construction/types.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"types.d.ts","sourceRoot":"","sources":["../../src/construction/types.ts"],"names":[],"mappings":"AAAA;;GAEG;AACH,MAAM,MAAM,QAAQ,GAAG,SAAS,GAAG,cAAc,GAAG,UAAU,CAAC;AAC/D,MAAM,MAAM,WAAW,GAAG,QAAQ,GAAG,YAAY,GAAG,OAAO,CAAC;AAE5D,MAAM,WAAW,SAAS;IACxB,QAAQ,EAAE,QAAQ,CAAC;IACnB,OAAO,EAAE,WAAW,CAAC;IACrB,IAAI,EAAE,MAAM,CAAC;IACb,WAAW,CAAC,EAAE,MAAM,CAAC;IACrB,SAAS,CAAC,EAAE,MAAM,CAAC;IACnB,aAAa,CAAC,EAAE,MAAM,CAAC;CACxB;AAED,MAAM,WAAW,UAAU;IACzB,SAAS,EAAE,MAAM,CAAC;IAClB,QAAQ,EAAE,MAAM,CAAC;IACjB,kBAAkB,EAAE,MAAM,CAAC;IAC3B,YAAY,EAAE,MAAM,CAAC;IACrB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,CAAC,EAAE,MAAM,CAAC;CACxB;AAED;;GAEG;AACH,MAAM,MAAM,aAAa,GAAG,IAAI,GAAG,IAAI,GAAG,IAAI,GAAG,IAAI,GAAG,IAAI,GAAG,IAAI,CAAC;AAEpE,MAAM,WAAW,aAAa;IAC5B,KAAK,EAAE,aAAa,CAAC;IACrB,MAAM,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,cAAc;IAC7B,MAAM,EAAE,MAAM,CAAC;IACf,IAAI,EAAE,MAAM,CAAC;IACb,MAAM,EAAE,MAAM,CAAC;IACf,KAAK,EAAE,MAAM,CAAC;IACd,KAAK,EAAE,MAAM,CAAC;CACf;AAED;;GAEG;AACH,MAAM,WAAW,cAAc;IAC7B,MAAM,EAAE,MAAM,CAAC;IACf,KAAK,EAAE,MAAM,CAAC;IACd,KAAK,EAAE,MAAM,CAAC;IACd,WAAW,EAAE,MAAM,CAAC;IACpB,YAAY,EAAE,MAAM,CAAC;CACtB;AAED,MAAM,WAAW,eAAe;IAC9B,UAAU,EAAE,MAAM,CAAC;IACnB,WAAW,EAAE,MAAM,CAAC;IACpB,eAAe,EAAE,MAAM,CAAC;CACzB;AAED;;GAEG;AACH,MAAM,MAAM,WAAW,GAAG,QAAQ,GAAG,MAAM,GAAG,MAAM,GAAG,MAAM,GAAG,SAAS,CAAC;AAE1E,MAAM,WAAW,aAAa;IAC5B,WAAW,EAAE,WAAW,CAAC;IACzB,MAAM,EAAE,MAAM,CAAC;IACf,KAAK,EAAE,MAAM,CAAC;IACd,MAAM,EAAE,MAAM,CAAC;IACf,QAAQ,EAAE,MAAM,CAAC;IACjB,MAAM,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,cAAc;IAC7B,aAAa,EAAE,MAAM,CAAC;IACtB,YAAY,EAAE,MAAM,CAAC;IACrB,gBAAgB,EAAE,MAAM,CAAC;IACzB,aAAa,EAAE,MAAM,CAAC;CACvB;AAED;;GAEG;AACH,MAAM,MAAM,SAAS,GAAG,KAAK,GAAG,KAAK,GAAG,KAAK,GAAG,KAAK,GAAG,KAAK,GAAG,KAAK,GAAG,KAAK,GAAG,KAAK,CAAC;AAEtF,MAAM,WAAW,UAAU;IACzB,IAAI,EAAE,SAAS,CAAC;IAChB,MAAM,EAAE,MAAM,CAAC;IACf,QAAQ,EAAE,MAAM,CAAC;CAClB;AAED,MAAM,WAAW,WAAW;IAC1B,UAAU,EAAE,MAAM,CAAC;IACnB,WAAW,EAAE,MAAM,CAAC;IACpB,WAAW,EAAE,MAAM,CAAC;CACrB;AAED;;GAEG;AACH,MAAM,MAAM,SAAS,GAAG,SAAS,GAAG,SAAS,GAAG,OAAO,CAAC;AAExD,MAAM,WAAW,UAAU;IACzB,QAAQ,EAAE,SAAS,CAAC;IACpB,KAAK,EAAE,MAAM,CAAC;CACf;AAED,MAAM,WAAW,WAAW;IAC1B,OAAO,EAAE,MAAM,CAAC;IAChB,OAAO,EAAE,MAAM,CAAC;IAChB,KAAK,EAAE,MAAM,CAAC;IACd,YAAY,EAAE,MAAM,CAAC;CACtB;AAED;;GAEG;AACH,MAAM,MAAM,aAAa,GAAG,QAAQ,GAAG,MAAM,GAAG,eAAe,GAAG,SAAS,GAAG,OAAO,GAAG,QAAQ,CAAC;AAEjG,MAAM,WAAW,gBAAgB;IAC/B,IAAI,EAAE,aAAa,CAAC;IACpB,OAAO,EAAE,MAAM,CAAC;IAChB,KAAK,EAAE,MAAM,CAAC;CACf;AAED,MAAM,WAAW,cAAc;IAC7B,MAAM,EAAE,MAAM,CAAC;IACf,KAAK,EAAE,MAAM,CAAC;IACd,KAAK,EAAE,MAAM,CAAC;IACd,SAAS,EAAE,QAAQ,GAAG,aAAa,CAAC;IACpC,aAAa,EAAE,aAAa,CAAC;IAC7B,aAAa,CAAC,EAAE,MAAM,CAAC;CACxB;AAED,MAAM,WAAW,eAAe;IAC9B,MAAM,EAAE,MAAM,CAAC;IACf,MAAM,EAAE,MAAM,CAAC;IACf,YAAY,EAAE,MAAM,CAAC;IACrB,YAAY,EAAE,MAAM,CAAC;IACrB,OAAO,EAAE,MAAM,CAAC;IAChB,QAAQ,EAAE,MAAM,CAAC;IACjB,QAAQ,EAAE,MAAM,CAAC;CAClB;AAED;;GAEG;AACH,MAAM,MAAM,SAAS,GAAG,SAAS,GAAG,UAAU,GAAG,OAAO,GAAG,MAAM,GAAG,QAAQ,CAAC;AAE7E,MAAM,WAAW,eAAe;IAC9B,MAAM,EAAE,MAAM,CAAC;IACf,MAAM,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,UAAU;IACzB,QAAQ,EAAE,MAAM,CAAC;IACjB,SAAS,EAAE,SAAS,CAAC;IACrB,YAAY,CAAC,EAAE,MAAM,CAAC;IACtB,YAAY,CAAC,EAAE,MAAM,CAAC;IACtB,eAAe,EAAE,MAAM,CAAC;IACxB,WAAW,EAAE,MAAM,CAAC;CACrB;AAED,MAAM,WAAW,WAAW;IAC1B,gBAAgB,EAAE,MAAM,CAAC;IACzB,WAAW,EAAE,MAAM,CAAC;IACpB,kBAAkB,EAAE,MAAM,CAAC;IAC3B,YAAY,EAAE,MAAM,CAAC;CACtB;AAED;;GAEG;AACH,MAAM,WAAW,QAAQ;IACvB,EAAE,EAAE,MAAM,CAAC;IACX,IAAI,EAAE,MAAM,CAAC;IACb,YAAY,EAAE,MAAM,EAAE,CAAC;IACvB,UAAU,EAAE,MAAM,CAAC;IACnB,UAAU,EAAE,MAAM,CAAC;IACnB,WAAW,EAAE,MAAM,CAAC;CACrB;AAED,MAAM,WAAW,SAAS;IACxB,KAAK,EAAE,QAAQ,EAAE,CAAC;IAClB,QAAQ,CAAC,EAAE,MAAM,CAAC;CACnB;AAED,MAAM,WAAW,cAAc;IAC7B,EAAE,EAAE,MAAM,CAAC;IACX,IAAI,EAAE,MAAM,CAAC;IACb,QAAQ,EAAE,MAAM,CAAC;IACjB,QAAQ,EAAE,MAAM,CAAC;IACjB,EAAE,EAAE,MAAM,CAAC;IACX,EAAE,EAAE,MAAM,CAAC;IACX,EAAE,EAAE,MAAM,CAAC;IACX,EAAE,EAAE,MAAM,CAAC;IACX,UAAU,EAAE,MAAM,CAAC;IACnB,SAAS,EAAE,MAAM,CAAC;IAClB,UAAU,EAAE,OAAO,CAAC;CACrB;AAED,MAAM,WAAW,UAAU;IACzB,KAAK,EAAE,cAAc,EAAE,CAAC;IACxB,YAAY,EAAE,MAAM,EAAE,CAAC;IACvB,eAAe,EAAE,MAAM,CAAC;IACxB,eAAe,EAAE,MAAM,CAAC;IACxB,aAAa,EAAE,MAAM,CAAC;IACtB,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,qBAAqB,CAAC,EAAE,MAAM,CAAC;CAChC;AAED;;GAEG;AACH,MAAM,WAAW,SAAS;IACxB,IAAI,EAAE,MAAM,CAAC;IACb,GAAG,EAAE,MAAM,CAAC;IACZ,eAAe,EAAE,MAAM,CAAC;IACxB,cAAc,EAAE,MAAM,CAAC;CACxB;AAED,MAAM,WAAW,UAAU;IACzB,UAAU,EAAE,MAAM,CAAC;IACnB,YAAY,EAAE,MAAM,CAAC;IACrB,YAAY,EAAE,MAAM,CAAC;IACrB,YAAY,EAAE,MAAM,CAAC;IACrB,WAAW,EAAE,MAAM,CAAC;IACpB,QAAQ,EAAE,MAAM,CAAC;IACjB,gBAAgB,EAAE,MAAM,CAAC;CAC1B;AAED;;GAEG;AACH,MAAM,WAAW,UAAU;IACzB,SAAS,EAAE,MAAM,CAAC;IAClB,QAAQ,EAAE,MAAM,CAAC;IACjB,WAAW,CAAC,EAAE,MAAM,CAAC;CACtB;AAED,MAAM,WAAW,WAAW;IAC1B,cAAc,EAAE,MAAM,CAAC;IACvB,cAAc,EAAE,MAAM,CAAC;IACvB,iBAAiB,EAAE,MAAM,CAAC;IAC1B,UAAU,EAAE,MAAM,CAAC;IACnB,cAAc,EAAE,MAAM,CAAC;IACvB,SAAS,EAAE,MAAM,CAAC;IAClB,aAAa,EAAE,OAAO,CAAC;IACvB,UAAU,EAAE,MAAM,CAAC;CACpB"}

package/dist/construction/types.js

@@ -0,0 +1,2 @@
+export {};
+//# sourceMappingURL=types.js.map

package/dist/construction/types.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"types.js","sourceRoot":"","sources":["../../src/construction/types.ts"],"names":[],"mappings":""}

package/dist/electronics/awg.d.ts

@@ -0,0 +1,9 @@
+import type { AwgInput, AwgResult } from './types.js';
+/**
+ * Calculate AWG wire properties
+ * AWG diameter formula: d(mm) = 0.127 × 92^((36-AWG)/39)
+ * @param input - AWG gauge number, material, and temperature
+ * @returns Wire properties or null if invalid input
+ */
+export declare function awgProperties(input: AwgInput): AwgResult | null;
+//# sourceMappingURL=awg.d.ts.map

package/dist/electronics/awg.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"awg.d.ts","sourceRoot":"","sources":["../../src/electronics/awg.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,QAAQ,EAAE,SAAS,EAAe,MAAM,YAAY,CAAC;AA6BnE;;;;;GAKG;AACH,wBAAgB,aAAa,CAAC,KAAK,EAAE,QAAQ,GAAG,SAAS,GAAG,IAAI,CA2C/D"}

package/dist/electronics/awg.js

@@ -0,0 +1,66 @@
+/**
+ * Round to specified decimal places
+ */
+function roundTo(value, decimals) {
+    const factor = Math.pow(10, decimals);
+    return Math.round(value * factor) / factor;
+}
+// Resistivity at 20°C in Ω·mm²/m
+const RESISTIVITY_20C = {
+    copper: 0.01724,
+    aluminum: 0.02826,
+};
+// Temperature coefficient in 1/°C
+const TEMP_COEFFICIENT = {
+    copper: 0.00393,
+    aluminum: 0.00403,
+};
+// Current capacity for chassis wiring (30°C ambient, single conductor in air)
+// Values based on common wire tables, roughly 5.5 A/mm² for copper
+const CURRENT_DENSITY = {
+    copper: 5.5, // A/mm²
+    aluminum: 4.3, // A/mm² (aluminum is less conductive)
+};
+/**
+ * Calculate AWG wire properties
+ * AWG diameter formula: d(mm) = 0.127 × 92^((36-AWG)/39)
+ * @param input - AWG gauge number, material, and temperature
+ * @returns Wire properties or null if invalid input
+ */
+export function awgProperties(input) {
+    const { awg, material, tempC } = input;
+    // Validate input range
+    if (awg < 0 || awg > 40) {
+        return null;
+    }
+    // Calculate diameter using AWG formula
+    // d(inch) = 0.005 × 92^((36-AWG)/39) → d(mm) = 0.127 × 92^((36-AWG)/39)
+    const diameterMm = 0.127 * Math.pow(92, (36 - awg) / 39);
+    const diameterMils = diameterMm / 0.0254;
+    // Cross-sectional area
+    const radiusMm = diameterMm / 2;
+    const areaMm2 = Math.PI * radiusMm * radiusMm;
+    // Circular mils: (diameter in mils)²
+    const areaCircularMils = diameterMils * diameterMils;
+    // Resistance per meter at operating temperature
+    // R = ρ / A × [1 + α(T - 20)]
+    const resistivity = RESISTIVITY_20C[material];
+    const tempCoeff = TEMP_COEFFICIENT[material];
+    const tempFactor = 1 + tempCoeff * (tempC - 20);
+    const resistancePerM = (resistivity / areaMm2) * tempFactor;
+    // Resistance per foot (1 ft = 0.3048 m)
+    const resistancePerFt = resistancePerM * 0.3048;
+    // Current capacity for chassis wiring
+    const currentDensity = CURRENT_DENSITY[material];
+    const currentCapacity = currentDensity * areaMm2;
+    return {
+        diameterMm: roundTo(diameterMm, 4),
+        diameterMils: roundTo(diameterMils, 2),
+        areaMm2: roundTo(areaMm2, 4),
+        areaCircularMils: roundTo(areaCircularMils, 0),
+        resistancePerM: roundTo(resistancePerM, 5),
+        resistancePerFt: roundTo(resistancePerFt, 5),
+        currentCapacity: roundTo(currentCapacity, 2),
+    };
+}
+//# sourceMappingURL=awg.js.map

package/dist/electronics/awg.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"awg.js","sourceRoot":"","sources":["../../src/electronics/awg.ts"],"names":[],"mappings":"AAEA;;GAEG;AACH,SAAS,OAAO,CAAC,KAAa,EAAE,QAAgB;IAC9C,MAAM,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,QAAQ,CAAC,CAAC;IACtC,OAAO,IAAI,CAAC,KAAK,CAAC,KAAK,GAAG,MAAM,CAAC,GAAG,MAAM,CAAC;AAC7C,CAAC;AAED,iCAAiC;AACjC,MAAM,eAAe,GAAgC;IACnD,MAAM,EAAE,OAAO;IACf,QAAQ,EAAE,OAAO;CAClB,CAAC;AAEF,kCAAkC;AAClC,MAAM,gBAAgB,GAAgC;IACpD,MAAM,EAAE,OAAO;IACf,QAAQ,EAAE,OAAO;CAClB,CAAC;AAEF,8EAA8E;AAC9E,mEAAmE;AACnE,MAAM,eAAe,GAAgC;IACnD,MAAM,EAAE,GAAG,EAAM,QAAQ;IACzB,QAAQ,EAAE,GAAG,EAAI,sCAAsC;CACxD,CAAC;AAEF;;;;;GAKG;AACH,MAAM,UAAU,aAAa,CAAC,KAAe;IAC3C,MAAM,EAAE,GAAG,EAAE,QAAQ,EAAE,KAAK,EAAE,GAAG,KAAK,CAAC;IAEvC,uBAAuB;IACvB,IAAI,GAAG,GAAG,CAAC,IAAI,GAAG,GAAG,EAAE,EAAE,CAAC;QACxB,OAAO,IAAI,CAAC;IACd,CAAC;IAED,uCAAuC;IACvC,wEAAwE;IACxE,MAAM,UAAU,GAAG,KAAK,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,CAAC,EAAE,GAAG,GAAG,CAAC,GAAG,EAAE,CAAC,CAAC;IACzD,MAAM,YAAY,GAAG,UAAU,GAAG,MAAM,CAAC;IAEzC,uBAAuB;IACvB,MAAM,QAAQ,GAAG,UAAU,GAAG,CAAC,CAAC;IAChC,MAAM,OAAO,GAAG,IAAI,CAAC,EAAE,GAAG,QAAQ,GAAG,QAAQ,CAAC;IAE9C,qCAAqC;IACrC,MAAM,gBAAgB,GAAG,YAAY,GAAG,YAAY,CAAC;IAErD,gDAAgD;IAChD,8BAA8B;IAC9B,MAAM,WAAW,GAAG,eAAe,CAAC,QAAQ,CAAC,CAAC;IAC9C,MAAM,SAAS,GAAG,gBAAgB,CAAC,QAAQ,CAAC,CAAC;IAC7C,MAAM,UAAU,GAAG,CAAC,GAAG,SAAS,GAAG,CAAC,KAAK,GAAG,EAAE,CAAC,CAAC;IAChD,MAAM,cAAc,GAAG,CAAC,WAAW,GAAG,OAAO,CAAC,GAAG,UAAU,CAAC;IAE5D,wCAAwC;IACxC,MAAM,eAAe,GAAG,cAAc,GAAG,MAAM,CAAC;IAEhD,sCAAsC;IACtC,MAAM,cAAc,GAAG,eAAe,CAAC,QAAQ,CAAC,CAAC;IACjD,MAAM,eAAe,GAAG,cAAc,GAAG,OAAO,CAAC;IAEjD,OAAO;QACL,UAAU,EAAE,OAAO,CAAC,UAAU,EAAE,CAAC,CAAC;QAClC,YAAY,EAAE,OAAO,CAAC,YAAY,EAAE,CAAC,CAAC;QACtC,OAAO,EAAE,OAAO,CAAC,OAAO,EAAE,CAAC,CAAC;QAC5B,gBAAgB,EAAE,OAAO,CAAC,gBAAgB,EAAE,CAAC,CAAC;QAC9C,cAAc,EAAE,OAAO,CAAC,cAAc,EAAE,CAAC,CAAC;QAC1C,eAAe,EAAE,OAAO,CAAC,eAAe,EAAE,CAAC,CAAC;QAC5C,eAAe,EAAE,OAAO,CAAC,eAAe,EAAE,CAAC,CAAC;KAC7C,CAAC;AACJ,CAAC"}

package/dist/electronics/capacitor.d.ts

@@ -0,0 +1,9 @@
+import type { CapacitorCodeInput, CapacitorCodeResult } from './types.js';
+/**
+ * Decode a 3-digit capacitor code to capacitance values
+ * @param input - The 3-digit capacitor code (e.g., "104")
+ * @returns Capacitance in pF, nF, and µF with formatted output
+ * @throws Error if code is invalid
+ */
+export declare function capacitorDecode(input: CapacitorCodeInput): CapacitorCodeResult;
+//# sourceMappingURL=capacitor.d.ts.map

package/dist/electronics/capacitor.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"capacitor.d.ts","sourceRoot":"","sources":["../../src/electronics/capacitor.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,kBAAkB,EAAE,mBAAmB,EAAE,MAAM,YAAY,CAAC;AAU1E;;;;;GAKG;AACH,wBAAgB,eAAe,CAAC,KAAK,EAAE,kBAAkB,GAAG,mBAAmB,CAyC9E"}

package/dist/electronics/capacitor.js

@@ -0,0 +1,51 @@
+/**
+ * Round to specified decimal places
+ */
+function roundTo(value, decimals) {
+    const factor = Math.pow(10, decimals);
+    return Math.round(value * factor) / factor;
+}
+/**
+ * Decode a 3-digit capacitor code to capacitance values
+ * @param input - The 3-digit capacitor code (e.g., "104")
+ * @returns Capacitance in pF, nF, and µF with formatted output
+ * @throws Error if code is invalid
+ */
+export function capacitorDecode(input) {
+    const { code } = input;
+    // Validate: must be exactly 3 digits
+    if (!/^\d{3}$/.test(code)) {
+        throw new Error('Invalid capacitor code: must be exactly 3 digits');
+    }
+    const digit1 = parseInt(code[0], 10);
+    const digit2 = parseInt(code[1], 10);
+    const multiplierDigit = parseInt(code[2], 10);
+    // Significant figures from first two digits
+    const significantFigures = digit1 * 10 + digit2;
+    // Multiplier is 10^n picofarads
+    const multiplier = Math.pow(10, multiplierDigit);
+    // Value in picofarads
+    const picofarads = significantFigures * multiplier;
+    const nanofarads = roundTo(picofarads / 1000, 6);
+    const microfarads = roundTo(picofarads / 1000000, 6);
+    // Format output string
+    let formatted;
+    if (microfarads >= 1) {
+        formatted = `${roundTo(microfarads, 3)}\u00B5F`;
+    }
+    else if (nanofarads >= 1) {
+        formatted = `${roundTo(nanofarads, 3)}nF`;
+    }
+    else {
+        formatted = `${picofarads}pF`;
+    }
+    return {
+        picofarads,
+        nanofarads,
+        microfarads,
+        formatted,
+        significantFigures,
+        multiplier,
+    };
+}
+//# sourceMappingURL=capacitor.js.map

package/dist/electronics/capacitor.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"capacitor.js","sourceRoot":"","sources":["../../src/electronics/capacitor.ts"],"names":[],"mappings":"AAEA;;GAEG;AACH,SAAS,OAAO,CAAC,KAAa,EAAE,QAAgB;IAC9C,MAAM,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,QAAQ,CAAC,CAAC;IACtC,OAAO,IAAI,CAAC,KAAK,CAAC,KAAK,GAAG,MAAM,CAAC,GAAG,MAAM,CAAC;AAC7C,CAAC;AAED;;;;;GAKG;AACH,MAAM,UAAU,eAAe,CAAC,KAAyB;IACvD,MAAM,EAAE,IAAI,EAAE,GAAG,KAAK,CAAC;IAEvB,qCAAqC;IACrC,IAAI,CAAC,SAAS,CAAC,IAAI,CAAC,IAAI,CAAC,EAAE,CAAC;QAC1B,MAAM,IAAI,KAAK,CAAC,kDAAkD,CAAC,CAAC;IACtE,CAAC;IAED,MAAM,MAAM,GAAG,QAAQ,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC;IACrC,MAAM,MAAM,GAAG,QAAQ,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC;IACrC,MAAM,eAAe,GAAG,QAAQ,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC;IAE9C,4CAA4C;IAC5C,MAAM,kBAAkB,GAAG,MAAM,GAAG,EAAE,GAAG,MAAM,CAAC;IAEhD,gCAAgC;IAChC,MAAM,UAAU,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,eAAe,CAAC,CAAC;IAEjD,sBAAsB;IACtB,MAAM,UAAU,GAAG,kBAAkB,GAAG,UAAU,CAAC;IACnD,MAAM,UAAU,GAAG,OAAO,CAAC,UAAU,GAAG,IAAI,EAAE,CAAC,CAAC,CAAC;IACjD,MAAM,WAAW,GAAG,OAAO,CAAC,UAAU,GAAG,OAAO,EAAE,CAAC,CAAC,CAAC;IAErD,uBAAuB;IACvB,IAAI,SAAiB,CAAC;IACtB,IAAI,WAAW,IAAI,CAAC,EAAE,CAAC;QACrB,SAAS,GAAG,GAAG,OAAO,CAAC,WAAW,EAAE,CAAC,CAAC,SAAS,CAAC;IAClD,CAAC;SAAM,IAAI,UAAU,IAAI,CAAC,EAAE,CAAC;QAC3B,SAAS,GAAG,GAAG,OAAO,CAAC,UAAU,EAAE,CAAC,CAAC,IAAI,CAAC;IAC5C,CAAC;SAAM,CAAC;QACN,SAAS,GAAG,GAAG,UAAU,IAAI,CAAC;IAChC,CAAC;IAED,OAAO;QACL,UAAU;QACV,UAAU;QACV,WAAW;QACX,SAAS;QACT,kBAAkB;QAClB,UAAU;KACX,CAAC;AACJ,CAAC"}

package/dist/electronics/index.d.ts

@@ -0,0 +1,12 @@
+export type { PasteType, ReflowInput, ReflowResult, BandCount, ColorName, ResistorBands, ResistorResult, SmtTaktInput, SmtTaktResult, SolderInput, SolderResult, TraceLayer, TraceInput, TraceResult, AwgMaterial, AwgInput, AwgResult, CapacitorCodeInput, CapacitorCodeResult, LedResistorInput, LedResistorResult, ApertureShape, ComponentType, StencilInput, StencilResult, ViaInput, ViaResult, } from './types.js';
+export { reflowProfile, getPasteTypes } from './reflow.js';
+export { resistorDecode } from './resistor.js';
+export { smtTakt } from './smt-takt.js';
+export { solderPaste } from './solder.js';
+export { traceWidth } from './trace.js';
+export { awgProperties } from './awg.js';
+export { capacitorDecode } from './capacitor.js';
+export { ledResistor } from './led.js';
+export { stencilAperture } from './stencil.js';
+export { viaCurrent } from './via.js';
+//# sourceMappingURL=index.d.ts.map

package/dist/electronics/index.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../src/electronics/index.ts"],"names":[],"mappings":"AACA,YAAY,EAEV,SAAS,EACT,WAAW,EACX,YAAY,EAEZ,SAAS,EACT,SAAS,EACT,aAAa,EACb,cAAc,EAEd,YAAY,EACZ,aAAa,EAEb,WAAW,EACX,YAAY,EAEZ,UAAU,EACV,UAAU,EACV,WAAW,EAEX,WAAW,EACX,QAAQ,EACR,SAAS,EAET,kBAAkB,EAClB,mBAAmB,EAEnB,gBAAgB,EAChB,iBAAiB,EAEjB,aAAa,EACb,aAAa,EACb,YAAY,EACZ,aAAa,EAEb,QAAQ,EACR,SAAS,GACV,MAAM,YAAY,CAAC;AAGpB,OAAO,EAAE,aAAa,EAAE,aAAa,EAAE,MAAM,aAAa,CAAC;AAC3D,OAAO,EAAE,cAAc,EAAE,MAAM,eAAe,CAAC;AAC/C,OAAO,EAAE,OAAO,EAAE,MAAM,eAAe,CAAC;AACxC,OAAO,EAAE,WAAW,EAAE,MAAM,aAAa,CAAC;AAC1C,OAAO,EAAE,UAAU,EAAE,MAAM,YAAY,CAAC;AACxC,OAAO,EAAE,aAAa,EAAE,MAAM,UAAU,CAAC;AACzC,OAAO,EAAE,eAAe,EAAE,MAAM,gBAAgB,CAAC;AACjD,OAAO,EAAE,WAAW,EAAE,MAAM,UAAU,CAAC;AACvC,OAAO,EAAE,eAAe,EAAE,MAAM,cAAc,CAAC;AAC/C,OAAO,EAAE,UAAU,EAAE,MAAM,UAAU,CAAC"}

package/dist/electronics/index.js

@@ -0,0 +1,12 @@
+// Functions
+export { reflowProfile, getPasteTypes } from './reflow.js';
+export { resistorDecode } from './resistor.js';
+export { smtTakt } from './smt-takt.js';
+export { solderPaste } from './solder.js';
+export { traceWidth } from './trace.js';
+export { awgProperties } from './awg.js';
+export { capacitorDecode } from './capacitor.js';
+export { ledResistor } from './led.js';
+export { stencilAperture } from './stencil.js';
+export { viaCurrent } from './via.js';
+//# sourceMappingURL=index.js.map

package/dist/electronics/index.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"index.js","sourceRoot":"","sources":["../../src/electronics/index.ts"],"names":[],"mappings":"AAyCA,YAAY;AACZ,OAAO,EAAE,aAAa,EAAE,aAAa,EAAE,MAAM,aAAa,CAAC;AAC3D,OAAO,EAAE,cAAc,EAAE,MAAM,eAAe,CAAC;AAC/C,OAAO,EAAE,OAAO,EAAE,MAAM,eAAe,CAAC;AACxC,OAAO,EAAE,WAAW,EAAE,MAAM,aAAa,CAAC;AAC1C,OAAO,EAAE,UAAU,EAAE,MAAM,YAAY,CAAC;AACxC,OAAO,EAAE,aAAa,EAAE,MAAM,UAAU,CAAC;AACzC,OAAO,EAAE,eAAe,EAAE,MAAM,gBAAgB,CAAC;AACjD,OAAO,EAAE,WAAW,EAAE,MAAM,UAAU,CAAC;AACvC,OAAO,EAAE,eAAe,EAAE,MAAM,cAAc,CAAC;AAC/C,OAAO,EAAE,UAAU,EAAE,MAAM,UAAU,CAAC"}

package/dist/electronics/led.d.ts

@@ -0,0 +1,9 @@
+import type { LedResistorInput, LedResistorResult } from './types.js';
+/**
+ * Calculate LED current limiting resistor
+ * @param input - Supply voltage, LED forward voltage, and desired current
+ * @returns Resistance value and related calculations
+ * @throws Error if supply voltage <= forward voltage or current <= 0
+ */
+export declare function ledResistor(input: LedResistorInput): LedResistorResult;
+//# sourceMappingURL=led.d.ts.map

package/dist/electronics/led.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"led.d.ts","sourceRoot":"","sources":["../../src/electronics/led.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,gBAAgB,EAAE,iBAAiB,EAAE,MAAM,YAAY,CAAC;AA+CtE;;;;;GAKG;AACH,wBAAgB,WAAW,CAAC,KAAK,EAAE,gBAAgB,GAAG,iBAAiB,CAgCtE"}

package/dist/electronics/led.js

@@ -0,0 +1,72 @@
+/**
+ * Round to specified decimal places
+ */
+function roundTo(value, decimals) {
+    const factor = Math.pow(10, decimals);
+    return Math.round(value * factor) / factor;
+}
+// E24 standard resistor series (5% tolerance)
+const E24_SERIES = [
+    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0,
+    3.3, 3.6, 3.9, 4.3, 4.7, 5.1, 5.6, 6.2, 6.8, 7.5, 8.2, 9.1,
+];
+/**
+ * Find the nearest standard E24 resistor value
+ */
+function findNearestStandardResistor(resistance) {
+    if (resistance <= 0)
+        return 10; // Minimum practical value
+    // Find the decade (power of 10)
+    const decade = Math.floor(Math.log10(resistance));
+    const normalized = resistance / Math.pow(10, decade);
+    // Find nearest E24 value
+    let nearestValue = E24_SERIES[0];
+    let minDiff = Math.abs(normalized - E24_SERIES[0]);
+    for (const value of E24_SERIES) {
+        const diff = Math.abs(normalized - value);
+        if (diff < minDiff) {
+            minDiff = diff;
+            nearestValue = value;
+        }
+    }
+    // Also check the next decade up (e.g., 1.0 * 10^(n+1))
+    const nextDecadeValue = E24_SERIES[0] * Math.pow(10, decade + 1);
+    if (Math.abs(resistance - nextDecadeValue) < Math.abs(resistance - nearestValue * Math.pow(10, decade))) {
+        return nextDecadeValue;
+    }
+    return roundTo(nearestValue * Math.pow(10, decade), 1);
+}
+/**
+ * Calculate LED current limiting resistor
+ * @param input - Supply voltage, LED forward voltage, and desired current
+ * @returns Resistance value and related calculations
+ * @throws Error if supply voltage <= forward voltage or current <= 0
+ */
+export function ledResistor(input) {
+    const { supplyVoltage, forwardVoltage, forwardCurrent } = input;
+    // Validate inputs
+    if (supplyVoltage <= forwardVoltage) {
+        throw new Error('Supply voltage must be greater than forward voltage');
+    }
+    if (forwardCurrent <= 0) {
+        throw new Error('Forward current must be positive');
+    }
+    // R = (Vs - Vf) / If
+    // Note: forwardCurrent is in mA, so convert to A for calculation
+    const forwardCurrentAmps = forwardCurrent / 1000;
+    const resistance = (supplyVoltage - forwardVoltage) / forwardCurrentAmps;
+    // Find nearest standard resistor value
+    const standardResistance = findNearestStandardResistor(resistance);
+    // Calculate power dissipation: P = If^2 * R (in milliwatts)
+    // Using the actual calculated resistance
+    const powerDissipation = roundTo(forwardCurrentAmps * forwardCurrentAmps * resistance * 1000, 2);
+    // Calculate actual current with standard resistor
+    const actualCurrent = roundTo((supplyVoltage - forwardVoltage) / standardResistance * 1000, 2);
+    return {
+        resistance: roundTo(resistance, 2),
+        standardResistance,
+        powerDissipation,
+        actualCurrent,
+    };
+}
+//# sourceMappingURL=led.js.map

package/dist/electronics/led.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"led.js","sourceRoot":"","sources":["../../src/electronics/led.ts"],"names":[],"mappings":"AAEA;;GAEG;AACH,SAAS,OAAO,CAAC,KAAa,EAAE,QAAgB;IAC9C,MAAM,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,QAAQ,CAAC,CAAC;IACtC,OAAO,IAAI,CAAC,KAAK,CAAC,KAAK,GAAG,MAAM,CAAC,GAAG,MAAM,CAAC;AAC7C,CAAC;AAED,8CAA8C;AAC9C,MAAM,UAAU,GAAG;IACjB,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG;IAC1D,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG;CAC3D,CAAC;AAEF;;GAEG;AACH,SAAS,2BAA2B,CAAC,UAAkB;IACrD,IAAI,UAAU,IAAI,CAAC;QAAE,OAAO,EAAE,CAAC,CAAC,0BAA0B;IAE1D,gCAAgC;IAChC,MAAM,MAAM,GAAG,IAAI,CAAC,KAAK,CAAC,IAAI,CAAC,KAAK,CAAC,UAAU,CAAC,CAAC,CAAC;IAClD,MAAM,UAAU,GAAG,UAAU,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,MAAM,CAAC,CAAC;IAErD,yBAAyB;IACzB,IAAI,YAAY,GAAG,UAAU,CAAC,CAAC,CAAC,CAAC;IACjC,IAAI,OAAO,GAAG,IAAI,CAAC,GAAG,CAAC,UAAU,GAAG,UAAU,CAAC,CAAC,CAAC,CAAC,CAAC;IAEnD,KAAK,MAAM,KAAK,IAAI,UAAU,EAAE,CAAC;QAC/B,MAAM,IAAI,GAAG,IAAI,CAAC,GAAG,CAAC,UAAU,GAAG,KAAK,CAAC,CAAC;QAC1C,IAAI,IAAI,GAAG,OAAO,EAAE,CAAC;YACnB,OAAO,GAAG,IAAI,CAAC;YACf,YAAY,GAAG,KAAK,CAAC;QACvB,CAAC;IACH,CAAC;IAED,uDAAuD;IACvD,MAAM,eAAe,GAAG,UAAU,CAAC,CAAC,CAAC,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,MAAM,GAAG,CAAC,CAAC,CAAC;IACjE,IAAI,IAAI,CAAC,GAAG,CAAC,UAAU,GAAG,eAAe,CAAC,GAAG,IAAI,CAAC,GAAG,CAAC,UAAU,GAAG,YAAY,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,MAAM,CAAC,CAAC,EAAE,CAAC;QACxG,OAAO,eAAe,CAAC;IACzB,CAAC;IAED,OAAO,OAAO,CAAC,YAAY,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,MAAM,CAAC,EAAE,CAAC,CAAC,CAAC;AACzD,CAAC;AAED;;;;;GAKG;AACH,MAAM,UAAU,WAAW,CAAC,KAAuB;IACjD,MAAM,EAAE,aAAa,EAAE,cAAc,EAAE,cAAc,EAAE,GAAG,KAAK,CAAC;IAEhE,kBAAkB;IAClB,IAAI,aAAa,IAAI,cAAc,EAAE,CAAC;QACpC,MAAM,IAAI,KAAK,CAAC,qDAAqD,CAAC,CAAC;IACzE,CAAC;IACD,IAAI,cAAc,IAAI,CAAC,EAAE,CAAC;QACxB,MAAM,IAAI,KAAK,CAAC,kCAAkC,CAAC,CAAC;IACtD,CAAC;IAED,qBAAqB;IACrB,iEAAiE;IACjE,MAAM,kBAAkB,GAAG,cAAc,GAAG,IAAI,CAAC;IACjD,MAAM,UAAU,GAAG,CAAC,aAAa,GAAG,cAAc,CAAC,GAAG,kBAAkB,CAAC;IAEzE,uCAAuC;IACvC,MAAM,kBAAkB,GAAG,2BAA2B,CAAC,UAAU,CAAC,CAAC;IAEnE,4DAA4D;IAC5D,yCAAyC;IACzC,MAAM,gBAAgB,GAAG,OAAO,CAAC,kBAAkB,GAAG,kBAAkB,GAAG,UAAU,GAAG,IAAI,EAAE,CAAC,CAAC,CAAC;IAEjG,kDAAkD;IAClD,MAAM,aAAa,GAAG,OAAO,CAAC,CAAC,aAAa,GAAG,cAAc,CAAC,GAAG,kBAAkB,GAAG,IAAI,EAAE,CAAC,CAAC,CAAC;IAE/F,OAAO;QACL,UAAU,EAAE,OAAO,CAAC,UAAU,EAAE,CAAC,CAAC;QAClC,kBAAkB;QAClB,gBAAgB;QAChB,aAAa;KACd,CAAC;AACJ,CAAC"}

package/dist/electronics/reflow.d.ts

@@ -0,0 +1,12 @@
+import type { PasteType, ReflowResult } from './types.js';
+/**
+ * Get all available paste types
+ */
+export declare function getPasteTypes(): PasteType[];
+/**
+ * Get reflow profile for a specific solder paste type
+ * @param pasteType - The type of solder paste
+ * @returns Reflow profile or undefined if paste type is invalid
+ */
+export declare function reflowProfile(pasteType: PasteType): ReflowResult | undefined;
+//# sourceMappingURL=reflow.d.ts.map

package/dist/electronics/reflow.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"reflow.d.ts","sourceRoot":"","sources":["../../src/electronics/reflow.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,SAAS,EAAE,YAAY,EAAE,MAAM,YAAY,CAAC;AA8D1D;;GAEG;AACH,wBAAgB,aAAa,IAAI,SAAS,EAAE,CAE3C;AAED;;;;GAIG;AACH,wBAAgB,aAAa,CAAC,SAAS,EAAE,SAAS,GAAG,YAAY,GAAG,SAAS,CAM5E"}