formulab 0.1.0

package/dist/metal/cutting.d.ts

@@ -0,0 +1,10 @@
+import type { CuttingInput, CuttingResult } from './types.js';
+/**
+ * Calculate cutting parameters for machining operations.
+ *
+ * RPM = 1000 x Vc / (pi x D)
+ * Feed rate = RPM x feed x (teeth for milling)
+ * MRR = material removal rate in cm3/min
+ */
+export declare function cutting(input: CuttingInput): CuttingResult;
+//# sourceMappingURL=cutting.d.ts.map

package/dist/metal/cutting.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"cutting.d.ts","sourceRoot":"","sources":["../../src/metal/cutting.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,YAAY,EAAE,aAAa,EAAE,MAAM,YAAY,CAAC;AAE9D;;;;;;GAMG;AACH,wBAAgB,OAAO,CAAC,KAAK,EAAE,YAAY,GAAG,aAAa,CA+C1D"}

package/dist/metal/cutting.js

@@ -0,0 +1,55 @@
+/**
+ * Calculate cutting parameters for machining operations.
+ *
+ * RPM = 1000 x Vc / (pi x D)
+ * Feed rate = RPM x feed x (teeth for milling)
+ * MRR = material removal rate in cm3/min
+ */
+export function cutting(input) {
+    const { operation, cuttingSpeed, toolDiameter } = input;
+    if (toolDiameter <= 0) {
+        return { rpm: 0, feedRate: 0, mrr: 0 };
+    }
+    // RPM = 1000 x Vc / (pi x D)
+    const rpm = (1000 * cuttingSpeed) / (Math.PI * toolDiameter);
+    let feedRate;
+    let mrr;
+    switch (operation) {
+        case 'turning': {
+            const f = input.feedPerRev ?? 0;
+            const ap = input.depthOfCut ?? 0;
+            feedRate = rpm * f; // mm/min
+            // MRR = Vc x f x ap (cm3/min) - simplified: feedRate x ap / 1000
+            mrr = (feedRate * ap) / 1000;
+            break;
+        }
+        case 'milling': {
+            const fz = input.feedPerTooth ?? 0;
+            const z = input.numberOfTeeth ?? 1;
+            const ap = input.depthOfCut ?? 0;
+            const ae = input.widthOfCut ?? 0;
+            feedRate = rpm * fz * z; // mm/min
+            // MRR = ae x ap x Vf / 1000 (cm3/min)
+            mrr = (ae * ap * feedRate) / 1000;
+            break;
+        }
+        case 'drilling': {
+            const f = input.feedPerRev ?? 0;
+            const d = toolDiameter;
+            feedRate = rpm * f;
+            // MRR = pi/4 x D^2 x f x n / 1000
+            mrr = (Math.PI / 4) * (d * d) * f * rpm / 1000;
+            break;
+        }
+    }
+    return {
+        rpm: roundTo(rpm, 0),
+        feedRate: roundTo(feedRate, 1),
+        mrr: roundTo(mrr, 2),
+    };
+}
+function roundTo(value, decimals) {
+    const factor = Math.pow(10, decimals);
+    return Math.round(value * factor) / factor;
+}
+//# sourceMappingURL=cutting.js.map

package/dist/metal/cutting.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"cutting.js","sourceRoot":"","sources":["../../src/metal/cutting.ts"],"names":[],"mappings":"AAEA;;;;;;GAMG;AACH,MAAM,UAAU,OAAO,CAAC,KAAmB;IACzC,MAAM,EAAE,SAAS,EAAE,YAAY,EAAE,YAAY,EAAE,GAAG,KAAK,CAAC;IAExD,IAAI,YAAY,IAAI,CAAC,EAAE,CAAC;QACtB,OAAO,EAAE,GAAG,EAAE,CAAC,EAAE,QAAQ,EAAE,CAAC,EAAE,GAAG,EAAE,CAAC,EAAE,CAAC;IACzC,CAAC;IAED,6BAA6B;IAC7B,MAAM,GAAG,GAAG,CAAC,IAAI,GAAG,YAAY,CAAC,GAAG,CAAC,IAAI,CAAC,EAAE,GAAG,YAAY,CAAC,CAAC;IAE7D,IAAI,QAAgB,CAAC;IACrB,IAAI,GAAW,CAAC;IAEhB,QAAQ,SAAS,EAAE,CAAC;QAClB,KAAK,SAAS,CAAC,CAAC,CAAC;YACf,MAAM,CAAC,GAAG,KAAK,CAAC,UAAU,IAAI,CAAC,CAAC;YAChC,MAAM,EAAE,GAAG,KAAK,CAAC,UAAU,IAAI,CAAC,CAAC;YACjC,QAAQ,GAAG,GAAG,GAAG,CAAC,CAAC,CAAC,SAAS;YAC7B,iEAAiE;YACjE,GAAG,GAAG,CAAC,QAAQ,GAAG,EAAE,CAAC,GAAG,IAAI,CAAC;YAC7B,MAAM;QACR,CAAC;QACD,KAAK,SAAS,CAAC,CAAC,CAAC;YACf,MAAM,EAAE,GAAG,KAAK,CAAC,YAAY,IAAI,CAAC,CAAC;YACnC,MAAM,CAAC,GAAG,KAAK,CAAC,aAAa,IAAI,CAAC,CAAC;YACnC,MAAM,EAAE,GAAG,KAAK,CAAC,UAAU,IAAI,CAAC,CAAC;YACjC,MAAM,EAAE,GAAG,KAAK,CAAC,UAAU,IAAI,CAAC,CAAC;YACjC,QAAQ,GAAG,GAAG,GAAG,EAAE,GAAG,CAAC,CAAC,CAAC,SAAS;YAClC,sCAAsC;YACtC,GAAG,GAAG,CAAC,EAAE,GAAG,EAAE,GAAG,QAAQ,CAAC,GAAG,IAAI,CAAC;YAClC,MAAM;QACR,CAAC;QACD,KAAK,UAAU,CAAC,CAAC,CAAC;YAChB,MAAM,CAAC,GAAG,KAAK,CAAC,UAAU,IAAI,CAAC,CAAC;YAChC,MAAM,CAAC,GAAG,YAAY,CAAC;YACvB,QAAQ,GAAG,GAAG,GAAG,CAAC,CAAC;YACnB,kCAAkC;YAClC,GAAG,GAAG,CAAC,IAAI,CAAC,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,GAAG,GAAG,IAAI,CAAC;YAC/C,MAAM;QACR,CAAC;IACH,CAAC;IAED,OAAO;QACL,GAAG,EAAE,OAAO,CAAC,GAAG,EAAE,CAAC,CAAC;QACpB,QAAQ,EAAE,OAAO,CAAC,QAAQ,EAAE,CAAC,CAAC;QAC9B,GAAG,EAAE,OAAO,CAAC,GAAG,EAAE,CAAC,CAAC;KACrB,CAAC;AACJ,CAAC;AAED,SAAS,OAAO,CAAC,KAAa,EAAE,QAAgB;IAC9C,MAAM,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,QAAQ,CAAC,CAAC;IACtC,OAAO,IAAI,CAAC,KAAK,CAAC,KAAK,GAAG,MAAM,CAAC,GAAG,MAAM,CAAC;AAC7C,CAAC"}

package/dist/metal/cuttingStock.d.ts

@@ -0,0 +1,8 @@
+import type { CuttingStockInput, CuttingStockResult } from './types.js';
+/**
+ * Calculate optimal cutting layout for 1D cutting stock problem.
+ *
+ * Uses First Fit Decreasing (FFD) or Best Fit Decreasing (BFD) algorithm.
+ */
+export declare function cuttingStock(input: CuttingStockInput): CuttingStockResult | null;
+//# sourceMappingURL=cuttingStock.d.ts.map

package/dist/metal/cuttingStock.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"cuttingStock.d.ts","sourceRoot":"","sources":["../../src/metal/cuttingStock.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,iBAAiB,EAAE,kBAAkB,EAAkB,MAAM,YAAY,CAAC;AAExF;;;;GAIG;AACH,wBAAgB,YAAY,CAAC,KAAK,EAAE,iBAAiB,GAAG,kBAAkB,GAAG,IAAI,CAmFhF"}

package/dist/metal/cuttingStock.js

@@ -0,0 +1,89 @@
+/**
+ * Calculate optimal cutting layout for 1D cutting stock problem.
+ *
+ * Uses First Fit Decreasing (FFD) or Best Fit Decreasing (BFD) algorithm.
+ */
+export function cuttingStock(input) {
+    const { stockLength, kerf, pieces, algorithm } = input;
+    if (pieces.length === 0)
+        return null;
+    // Expand quantities
+    const expanded = [];
+    for (const p of pieces) {
+        for (let i = 0; i < p.quantity; i++) {
+            expanded.push({ length: p.length, label: p.label ?? `${p.length}` });
+        }
+    }
+    // Check if any piece exceeds stock length
+    if (expanded.some(p => p.length > stockLength))
+        return null;
+    if (expanded.length === 0)
+        return null;
+    // Sort descending by length
+    expanded.sort((a, b) => b.length - a.length);
+    // Bins: each bin tracks its pieces and remaining space
+    const bins = [];
+    for (const piece of expanded) {
+        let bestBinIdx = -1;
+        if (algorithm === 'ffd') {
+            // First Fit Decreasing: find first bin where piece fits
+            for (let i = 0; i < bins.length; i++) {
+                const kerfNeeded = bins[i].pieces.length > 0 ? kerf : 0;
+                if (bins[i].remaining - kerfNeeded >= piece.length) {
+                    bestBinIdx = i;
+                    break;
+                }
+            }
+        }
+        else {
+            // Best Fit Decreasing: find bin with least remaining space after placing
+            let bestRemaining = Infinity;
+            for (let i = 0; i < bins.length; i++) {
+                const kerfNeeded = bins[i].pieces.length > 0 ? kerf : 0;
+                const newRemaining = bins[i].remaining - kerfNeeded - piece.length;
+                if (newRemaining >= 0 && newRemaining < bestRemaining) {
+                    bestRemaining = newRemaining;
+                    bestBinIdx = i;
+                }
+            }
+        }
+        if (bestBinIdx === -1) {
+            // Open new bin
+            bins.push({ pieces: [piece], remaining: stockLength - piece.length });
+        }
+        else {
+            const kerfNeeded = bins[bestBinIdx].pieces.length > 0 ? kerf : 0;
+            bins[bestBinIdx].pieces.push(piece);
+            bins[bestBinIdx].remaining -= (piece.length + kerfNeeded);
+        }
+    }
+    // Build patterns
+    let totalKerfLoss = 0;
+    const patterns = bins.map(bin => {
+        const kerfLoss = (bin.pieces.length - 1) * kerf;
+        totalKerfLoss += kerfLoss;
+        const usedLength = bin.pieces.reduce((s, p) => s + p.length, 0) + kerfLoss;
+        const waste = stockLength - usedLength;
+        return {
+            pieces: bin.pieces,
+            usedLength: roundTo(usedLength, 1),
+            waste: roundTo(waste, 1),
+            wastePercent: roundTo((waste / stockLength) * 100, 1),
+        };
+    });
+    const totalMaterial = stockLength * bins.length;
+    const totalWaste = patterns.reduce((s, p) => s + p.waste, 0);
+    return {
+        stocksUsed: bins.length,
+        totalWaste: roundTo(totalWaste, 1),
+        totalKerfLoss: roundTo(totalKerfLoss, 1),
+        wastePercent: roundTo((totalWaste / totalMaterial) * 100, 1),
+        utilizationPercent: roundTo(((totalMaterial - totalWaste) / totalMaterial) * 100, 1),
+        patterns,
+    };
+}
+function roundTo(value, decimals) {
+    const factor = Math.pow(10, decimals);
+    return Math.round(value * factor) / factor;
+}
+//# sourceMappingURL=cuttingStock.js.map

package/dist/metal/cuttingStock.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"cuttingStock.js","sourceRoot":"","sources":["../../src/metal/cuttingStock.ts"],"names":[],"mappings":"AAEA;;;;GAIG;AACH,MAAM,UAAU,YAAY,CAAC,KAAwB;IACnD,MAAM,EAAE,WAAW,EAAE,IAAI,EAAE,MAAM,EAAE,SAAS,EAAE,GAAG,KAAK,CAAC;IACvD,IAAI,MAAM,CAAC,MAAM,KAAK,CAAC;QAAE,OAAO,IAAI,CAAC;IAErC,oBAAoB;IACpB,MAAM,QAAQ,GAAwC,EAAE,CAAC;IACzD,KAAK,MAAM,CAAC,IAAI,MAAM,EAAE,CAAC;QACvB,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,CAAC,QAAQ,EAAE,CAAC,EAAE,EAAE,CAAC;YACpC,QAAQ,CAAC,IAAI,CAAC,EAAE,MAAM,EAAE,CAAC,CAAC,MAAM,EAAE,KAAK,EAAE,CAAC,CAAC,KAAK,IAAI,GAAG,CAAC,CAAC,MAAM,EAAE,EAAE,CAAC,CAAC;QACvE,CAAC;IACH,CAAC;IAED,0CAA0C;IAC1C,IAAI,QAAQ,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,MAAM,GAAG,WAAW,CAAC;QAAE,OAAO,IAAI,CAAC;IAC5D,IAAI,QAAQ,CAAC,MAAM,KAAK,CAAC;QAAE,OAAO,IAAI,CAAC;IAEvC,4BAA4B;IAC5B,QAAQ,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,MAAM,GAAG,CAAC,CAAC,MAAM,CAAC,CAAC;IAE7C,uDAAuD;IACvD,MAAM,IAAI,GAAyE,EAAE,CAAC;IAEtF,KAAK,MAAM,KAAK,IAAI,QAAQ,EAAE,CAAC;QAC7B,IAAI,UAAU,GAAG,CAAC,CAAC,CAAC;QAEpB,IAAI,SAAS,KAAK,KAAK,EAAE,CAAC;YACxB,wDAAwD;YACxD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;gBACrC,MAAM,UAAU,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC;gBACxD,IAAI,IAAI,CAAC,CAAC,CAAC,CAAC,SAAS,GAAG,UAAU,IAAI,KAAK,CAAC,MAAM,EAAE,CAAC;oBACnD,UAAU,GAAG,CAAC,CAAC;oBACf,MAAM;gBACR,CAAC;YACH,CAAC;QACH,CAAC;aAAM,CAAC;YACN,yEAAyE;YACzE,IAAI,aAAa,GAAG,QAAQ,CAAC;YAC7B,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;gBACrC,MAAM,UAAU,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC;gBACxD,MAAM,YAAY,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC,SAAS,GAAG,UAAU,GAAG,KAAK,CAAC,MAAM,CAAC;gBACnE,IAAI,YAAY,IAAI,CAAC,IAAI,YAAY,GAAG,aAAa,EAAE,CAAC;oBACtD,aAAa,GAAG,YAAY,CAAC;oBAC7B,UAAU,GAAG,CAAC,CAAC;gBACjB,CAAC;YACH,CAAC;QACH,CAAC;QAED,IAAI,UAAU,KAAK,CAAC,CAAC,EAAE,CAAC;YACtB,eAAe;YACf,IAAI,CAAC,IAAI,CAAC,EAAE,MAAM,EAAE,CAAC,KAAK,CAAC,EAAE,SAAS,EAAE,WAAW,GAAG,KAAK,CAAC,MAAM,EAAE,CAAC,CAAC;QACxE,CAAC;aAAM,CAAC;YACN,MAAM,UAAU,GAAG,IAAI,CAAC,UAAU,CAAC,CAAC,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC;YACjE,IAAI,CAAC,UAAU,CAAC,CAAC,MAAM,CAAC,IAAI,CAAC,KAAK,CAAC,CAAC;YACpC,IAAI,CAAC,UAAU,CAAC,CAAC,SAAS,IAAI,CAAC,KAAK,CAAC,MAAM,GAAG,UAAU,CAAC,CAAC;QAC5D,CAAC;IACH,CAAC;IAED,iBAAiB;IACjB,IAAI,aAAa,GAAG,CAAC,CAAC;IACtB,MAAM,QAAQ,GAAqB,IAAI,CAAC,GAAG,CAAC,GAAG,CAAC,EAAE;QAChD,MAAM,QAAQ,GAAG,CAAC,GAAG,CAAC,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,GAAG,IAAI,CAAC;QAChD,aAAa,IAAI,QAAQ,CAAC;QAC1B,MAAM,UAAU,GAAG,GAAG,CAAC,MAAM,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,MAAM,EAAE,CAAC,CAAC,GAAG,QAAQ,CAAC;QAC3E,MAAM,KAAK,GAAG,WAAW,GAAG,UAAU,CAAC;QACvC,OAAO;YACL,MAAM,EAAE,GAAG,CAAC,MAAM;YAClB,UAAU,EAAE,OAAO,CAAC,UAAU,EAAE,CAAC,CAAC;YAClC,KAAK,EAAE,OAAO,CAAC,KAAK,EAAE,CAAC,CAAC;YACxB,YAAY,EAAE,OAAO,CAAC,CAAC,KAAK,GAAG,WAAW,CAAC,GAAG,GAAG,EAAE,CAAC,CAAC;SACtD,CAAC;IACJ,CAAC,CAAC,CAAC;IAEH,MAAM,aAAa,GAAG,WAAW,GAAG,IAAI,CAAC,MAAM,CAAC;IAChD,MAAM,UAAU,GAAG,QAAQ,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,KAAK,EAAE,CAAC,CAAC,CAAC;IAE7D,OAAO;QACL,UAAU,EAAE,IAAI,CAAC,MAAM;QACvB,UAAU,EAAE,OAAO,CAAC,UAAU,EAAE,CAAC,CAAC;QAClC,aAAa,EAAE,OAAO,CAAC,aAAa,EAAE,CAAC,CAAC;QACxC,YAAY,EAAE,OAAO,CAAC,CAAC,UAAU,GAAG,aAAa,CAAC,GAAG,GAAG,EAAE,CAAC,CAAC;QAC5D,kBAAkB,EAAE,OAAO,CAAC,CAAC,CAAC,aAAa,GAAG,UAAU,CAAC,GAAG,aAAa,CAAC,GAAG,GAAG,EAAE,CAAC,CAAC;QACpF,QAAQ;KACT,CAAC;AACJ,CAAC;AAED,SAAS,OAAO,CAAC,KAAa,EAAE,QAAgB;IAC9C,MAAM,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,QAAQ,CAAC,CAAC;IACtC,OAAO,IAAI,CAAC,KAAK,CAAC,KAAK,GAAG,MAAM,CAAC,GAAG,MAAM,CAAC;AAC7C,CAAC"}

package/dist/metal/flatPattern.d.ts

@@ -0,0 +1,12 @@
+import type { FlatPatternInput, FlatPatternResult } from './types.js';
+/**
+ * Calculate flat pattern length for bent sheet metal.
+ *
+ * For L-shape: Flat Length = flangeA + flangeB - Bend Deduction
+ * For U-shape: Flat Length = flangeA + flangeB + flangeC - 2 x Bend Deduction
+ *
+ * @param input - Flat pattern input parameters
+ * @returns FlatPatternResult with flat length, BA, BD, and K-factor
+ */
+export declare function flatPattern(input: FlatPatternInput): FlatPatternResult;
+//# sourceMappingURL=flatPattern.d.ts.map

package/dist/metal/flatPattern.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"flatPattern.d.ts","sourceRoot":"","sources":["../../src/metal/flatPattern.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,gBAAgB,EAAE,iBAAiB,EAAmB,MAAM,YAAY,CAAC;AAavF;;;;;;;;GAQG;AACH,wBAAgB,WAAW,CAAC,KAAK,EAAE,gBAAgB,GAAG,iBAAiB,CA6CtE"}

package/dist/metal/flatPattern.js

@@ -0,0 +1,50 @@
+/**
+ * Default K-factor values by material
+ */
+const K_FACTOR_TABLE = {
+    mildSteel: 0.44,
+    stainless304: 0.45,
+    aluminum5052: 0.40,
+    aluminum6061: 0.42,
+    custom: 0.44,
+};
+/**
+ * Calculate flat pattern length for bent sheet metal.
+ *
+ * For L-shape: Flat Length = flangeA + flangeB - Bend Deduction
+ * For U-shape: Flat Length = flangeA + flangeB + flangeC - 2 x Bend Deduction
+ *
+ * @param input - Flat pattern input parameters
+ * @returns FlatPatternResult with flat length, BA, BD, and K-factor
+ */
+export function flatPattern(input) {
+    const { shapeType, thickness, bendAngle, insideRadius, material = 'mildSteel', flangeA, flangeB, flangeC = 0, } = input;
+    // Get K-factor: use provided or default from table
+    const kFactor = input.kFactor ?? K_FACTOR_TABLE[material];
+    // Convert bend angle to radians
+    const bendAngleRad = (bendAngle * Math.PI) / 180;
+    // Calculate Bend Allowance (BA)
+    const ba = bendAngleRad * (insideRadius + kFactor * thickness);
+    // Calculate Outside Setback (OSSB)
+    const halfAngleRad = bendAngleRad / 2;
+    const ossb = (insideRadius + thickness) * Math.tan(halfAngleRad);
+    // Calculate Bend Deduction (BD)
+    const bd = 2 * ossb - ba;
+    // Calculate flat length based on shape type
+    let flatLength;
+    if (shapeType === 'lShape') {
+        // L-shape: one bend
+        flatLength = flangeA + flangeB - bd;
+    }
+    else {
+        // U-shape: two bends
+        flatLength = flangeA + flangeB + flangeC - 2 * bd;
+    }
+    return {
+        flatLength,
+        bendAllowance: ba,
+        bendDeduction: bd,
+        kFactor,
+    };
+}
+//# sourceMappingURL=flatPattern.js.map

package/dist/metal/flatPattern.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"flatPattern.js","sourceRoot":"","sources":["../../src/metal/flatPattern.ts"],"names":[],"mappings":"AAEA;;GAEG;AACH,MAAM,cAAc,GAAoC;IACtD,SAAS,EAAE,IAAI;IACf,YAAY,EAAE,IAAI;IAClB,YAAY,EAAE,IAAI;IAClB,YAAY,EAAE,IAAI;IAClB,MAAM,EAAE,IAAI;CACb,CAAC;AAEF;;;;;;;;GAQG;AACH,MAAM,UAAU,WAAW,CAAC,KAAuB;IACjD,MAAM,EACJ,SAAS,EACT,SAAS,EACT,SAAS,EACT,YAAY,EACZ,QAAQ,GAAG,WAAW,EACtB,OAAO,EACP,OAAO,EACP,OAAO,GAAG,CAAC,GACZ,GAAG,KAAK,CAAC;IAEV,mDAAmD;IACnD,MAAM,OAAO,GAAG,KAAK,CAAC,OAAO,IAAI,cAAc,CAAC,QAAQ,CAAC,CAAC;IAE1D,gCAAgC;IAChC,MAAM,YAAY,GAAG,CAAC,SAAS,GAAG,IAAI,CAAC,EAAE,CAAC,GAAG,GAAG,CAAC;IAEjD,gCAAgC;IAChC,MAAM,EAAE,GAAG,YAAY,GAAG,CAAC,YAAY,GAAG,OAAO,GAAG,SAAS,CAAC,CAAC;IAE/D,mCAAmC;IACnC,MAAM,YAAY,GAAG,YAAY,GAAG,CAAC,CAAC;IACtC,MAAM,IAAI,GAAG,CAAC,YAAY,GAAG,SAAS,CAAC,GAAG,IAAI,CAAC,GAAG,CAAC,YAAY,CAAC,CAAC;IAEjE,gCAAgC;IAChC,MAAM,EAAE,GAAG,CAAC,GAAG,IAAI,GAAG,EAAE,CAAC;IAEzB,4CAA4C;IAC5C,IAAI,UAAkB,CAAC;IAEvB,IAAI,SAAS,KAAK,QAAQ,EAAE,CAAC;QAC3B,oBAAoB;QACpB,UAAU,GAAG,OAAO,GAAG,OAAO,GAAG,EAAE,CAAC;IACtC,CAAC;SAAM,CAAC;QACN,qBAAqB;QACrB,UAAU,GAAG,OAAO,GAAG,OAAO,GAAG,OAAO,GAAG,CAAC,GAAG,EAAE,CAAC;IACpD,CAAC;IAED,OAAO;QACL,UAAU;QACV,aAAa,EAAE,EAAE;QACjB,aAAa,EAAE,EAAE;QACjB,OAAO;KACR,CAAC;AACJ,CAAC"}

package/dist/metal/gear.d.ts

@@ -0,0 +1,13 @@
+import type { GearInput, GearResult } from './types.js';
+/**
+ * Calculate gear geometry based on module system.
+ *
+ * Module: m = d / z (pitch diameter / number of teeth)
+ * Center distance: a = (z1 + z2) x m / 2
+ * Addendum: ha = m
+ * Dedendum: hf = 1.25 x m
+ * Circular pitch: p = pi x m
+ * Base circle diameter: db = d x cos(pressure angle)
+ */
+export declare function gear(input: GearInput): GearResult;
+//# sourceMappingURL=gear.d.ts.map

package/dist/metal/gear.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"gear.d.ts","sourceRoot":"","sources":["../../src/metal/gear.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,SAAS,EAAE,UAAU,EAAE,MAAM,YAAY,CAAC;AAMxD;;;;;;;;;GASG;AACH,wBAAgB,IAAI,CAAC,KAAK,EAAE,SAAS,GAAG,UAAU,CA2DjD"}

package/dist/metal/gear.js

@@ -0,0 +1,79 @@
+// Standard pressure angle for spur gears (degrees)
+const PRESSURE_ANGLE_DEG = 20;
+const PRESSURE_ANGLE_RAD = (PRESSURE_ANGLE_DEG * Math.PI) / 180;
+/**
+ * Calculate gear geometry based on module system.
+ *
+ * Module: m = d / z (pitch diameter / number of teeth)
+ * Center distance: a = (z1 + z2) x m / 2
+ * Addendum: ha = m
+ * Dedendum: hf = 1.25 x m
+ * Circular pitch: p = pi x m
+ * Base circle diameter: db = d x cos(pressure angle)
+ */
+export function gear(input) {
+    const { mode } = input;
+    let module;
+    let z1;
+    let z2;
+    if (mode === 'fromModule') {
+        // Validate inputs for fromModule mode
+        if (!input.module || input.module <= 0 || !input.teethGear1 || input.teethGear1 <= 0) {
+            return createEmptyResult();
+        }
+        module = input.module;
+        z1 = input.teethGear1;
+        z2 = input.teethGear2 && input.teethGear2 > 0 ? input.teethGear2 : undefined;
+    }
+    else {
+        // fromPitchDiameter mode
+        if (!input.pitchDiameter || input.pitchDiameter <= 0 ||
+            !input.numberOfTeeth || input.numberOfTeeth <= 0) {
+            return createEmptyResult();
+        }
+        module = input.pitchDiameter / input.numberOfTeeth;
+        z1 = input.numberOfTeeth;
+        z2 = undefined;
+    }
+    // Pitch diameters
+    const d1 = module * z1;
+    const d2 = z2 !== undefined ? module * z2 : undefined;
+    // Center distance (only if both gears specified)
+    const centerDistance = z2 !== undefined ? ((z1 + z2) * module) / 2 : undefined;
+    // Standard gear tooth dimensions
+    const addendum = module; // ha = 1.0 x m
+    const dedendum = 1.25 * module; // hf = 1.25 x m
+    const circularPitch = Math.PI * module; // p = pi x m
+    // Base circle diameter (for involute profile)
+    const baseCircleDiameter1 = d1 * Math.cos(PRESSURE_ANGLE_RAD);
+    const result = {
+        module: roundTo(module, 3),
+        pitchDiameter1: roundTo(d1, 3),
+        addendum: roundTo(addendum, 3),
+        dedendum: roundTo(dedendum, 3),
+        circularPitch: roundTo(circularPitch, 3),
+        baseCircleDiameter1: roundTo(baseCircleDiameter1, 3),
+    };
+    if (d2 !== undefined) {
+        result.pitchDiameter2 = roundTo(d2, 3);
+    }
+    if (centerDistance !== undefined) {
+        result.centerDistance = roundTo(centerDistance, 3);
+    }
+    return result;
+}
+function createEmptyResult() {
+    return {
+        module: 0,
+        pitchDiameter1: 0,
+        addendum: 0,
+        dedendum: 0,
+        circularPitch: 0,
+        baseCircleDiameter1: 0,
+    };
+}
+function roundTo(value, decimals) {
+    const factor = Math.pow(10, decimals);
+    return Math.round(value * factor) / factor;
+}
+//# sourceMappingURL=gear.js.map

package/dist/metal/gear.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"gear.js","sourceRoot":"","sources":["../../src/metal/gear.ts"],"names":[],"mappings":"AAEA,mDAAmD;AACnD,MAAM,kBAAkB,GAAG,EAAE,CAAC;AAC9B,MAAM,kBAAkB,GAAG,CAAC,kBAAkB,GAAG,IAAI,CAAC,EAAE,CAAC,GAAG,GAAG,CAAC;AAEhE;;;;;;;;;GASG;AACH,MAAM,UAAU,IAAI,CAAC,KAAgB;IACnC,MAAM,EAAE,IAAI,EAAE,GAAG,KAAK,CAAC;IAEvB,IAAI,MAAc,CAAC;IACnB,IAAI,EAAU,CAAC;IACf,IAAI,EAAsB,CAAC;IAE3B,IAAI,IAAI,KAAK,YAAY,EAAE,CAAC;QAC1B,sCAAsC;QACtC,IAAI,CAAC,KAAK,CAAC,MAAM,IAAI,KAAK,CAAC,MAAM,IAAI,CAAC,IAAI,CAAC,KAAK,CAAC,UAAU,IAAI,KAAK,CAAC,UAAU,IAAI,CAAC,EAAE,CAAC;YACrF,OAAO,iBAAiB,EAAE,CAAC;QAC7B,CAAC;QACD,MAAM,GAAG,KAAK,CAAC,MAAM,CAAC;QACtB,EAAE,GAAG,KAAK,CAAC,UAAU,CAAC;QACtB,EAAE,GAAG,KAAK,CAAC,UAAU,IAAI,KAAK,CAAC,UAAU,GAAG,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,UAAU,CAAC,CAAC,CAAC,SAAS,CAAC;IAC/E,CAAC;SAAM,CAAC;QACN,yBAAyB;QACzB,IAAI,CAAC,KAAK,CAAC,aAAa,IAAI,KAAK,CAAC,aAAa,IAAI,CAAC;YAChD,CAAC,KAAK,CAAC,aAAa,IAAI,KAAK,CAAC,aAAa,IAAI,CAAC,EAAE,CAAC;YACrD,OAAO,iBAAiB,EAAE,CAAC;QAC7B,CAAC;QACD,MAAM,GAAG,KAAK,CAAC,aAAa,GAAG,KAAK,CAAC,aAAa,CAAC;QACnD,EAAE,GAAG,KAAK,CAAC,aAAa,CAAC;QACzB,EAAE,GAAG,SAAS,CAAC;IACjB,CAAC;IAED,kBAAkB;IAClB,MAAM,EAAE,GAAG,MAAM,GAAG,EAAE,CAAC;IACvB,MAAM,EAAE,GAAG,EAAE,KAAK,SAAS,CAAC,CAAC,CAAC,MAAM,GAAG,EAAE,CAAC,CAAC,CAAC,SAAS,CAAC;IAEtD,iDAAiD;IACjD,MAAM,cAAc,GAAG,EAAE,KAAK,SAAS,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,GAAG,EAAE,CAAC,GAAG,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,SAAS,CAAC;IAE/E,iCAAiC;IACjC,MAAM,QAAQ,GAAG,MAAM,CAAC,CAAW,eAAe;IAClD,MAAM,QAAQ,GAAG,IAAI,GAAG,MAAM,CAAC,CAAI,gBAAgB;IACnD,MAAM,aAAa,GAAG,IAAI,CAAC,EAAE,GAAG,MAAM,CAAC,CAAC,aAAa;IAErD,8CAA8C;IAC9C,MAAM,mBAAmB,GAAG,EAAE,GAAG,IAAI,CAAC,GAAG,CAAC,kBAAkB,CAAC,CAAC;IAE9D,MAAM,MAAM,GAAe;QACzB,MAAM,EAAE,OAAO,CAAC,MAAM,EAAE,CAAC,CAAC;QAC1B,cAAc,EAAE,OAAO,CAAC,EAAE,EAAE,CAAC,CAAC;QAC9B,QAAQ,EAAE,OAAO,CAAC,QAAQ,EAAE,CAAC,CAAC;QAC9B,QAAQ,EAAE,OAAO,CAAC,QAAQ,EAAE,CAAC,CAAC;QAC9B,aAAa,EAAE,OAAO,CAAC,aAAa,EAAE,CAAC,CAAC;QACxC,mBAAmB,EAAE,OAAO,CAAC,mBAAmB,EAAE,CAAC,CAAC;KACrD,CAAC;IAEF,IAAI,EAAE,KAAK,SAAS,EAAE,CAAC;QACrB,MAAM,CAAC,cAAc,GAAG,OAAO,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC;IACzC,CAAC;IAED,IAAI,cAAc,KAAK,SAAS,EAAE,CAAC;QACjC,MAAM,CAAC,cAAc,GAAG,OAAO,CAAC,cAAc,EAAE,CAAC,CAAC,CAAC;IACrD,CAAC;IAED,OAAO,MAAM,CAAC;AAChB,CAAC;AAED,SAAS,iBAAiB;IACxB,OAAO;QACL,MAAM,EAAE,CAAC;QACT,cAAc,EAAE,CAAC;QACjB,QAAQ,EAAE,CAAC;QACX,QAAQ,EAAE,CAAC;QACX,aAAa,EAAE,CAAC;QAChB,mBAAmB,EAAE,CAAC;KACvB,CAAC;AACJ,CAAC;AAED,SAAS,OAAO,CAAC,KAAa,EAAE,QAAgB;IAC9C,MAAM,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,QAAQ,CAAC,CAAC;IACtC,OAAO,IAAI,CAAC,KAAK,CAAC,KAAK,GAAG,MAAM,CAAC,GAAG,MAAM,CAAC;AAC7C,CAAC"}

package/dist/metal/hardness.d.ts

@@ -0,0 +1,15 @@
+import type { HardnessInput, HardnessResult } from './types.js';
+interface ConversionRow {
+    HRC: number;
+    HB: number;
+    HV: number;
+    Shore: number;
+}
+export declare const CONVERSION_TABLE: ConversionRow[];
+/**
+ * Convert a hardness value from one scale to all scales using
+ * linear interpolation on the conversion table.
+ */
+export declare function hardness(input: HardnessInput): HardnessResult;
+export {};
+//# sourceMappingURL=hardness.d.ts.map

package/dist/metal/hardness.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"hardness.d.ts","sourceRoot":"","sources":["../../src/metal/hardness.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAiB,aAAa,EAAE,cAAc,EAAE,MAAM,YAAY,CAAC;AAE/E,UAAU,aAAa;IACrB,GAAG,EAAE,MAAM,CAAC;IACZ,EAAE,EAAE,MAAM,CAAC;IACX,EAAE,EAAE,MAAM,CAAC;IACX,KAAK,EAAE,MAAM,CAAC;CACf;AAID,eAAO,MAAM,gBAAgB,EAAE,aAAa,EAY3C,CAAC;AAoBF;;;GAGG;AACH,wBAAgB,QAAQ,CAAC,KAAK,EAAE,aAAa,GAAG,cAAc,CA6C7D"}

package/dist/metal/hardness.js

@@ -0,0 +1,77 @@
+// ASTM E140-12b conversion table for non-austenitic steels
+// HB values use tungsten carbide ball; HB not defined above HRC ~65 (capped at 739)
+export const CONVERSION_TABLE = [
+    { HRC: 68, HB: 739, HV: 940, Shore: 97 },
+    { HRC: 65, HB: 739, HV: 832, Shore: 91 },
+    { HRC: 60, HB: 613, HV: 697, Shore: 81 },
+    { HRC: 55, HB: 560, HV: 595, Shore: 75 },
+    { HRC: 50, HB: 481, HV: 513, Shore: 68 },
+    { HRC: 45, HB: 421, HV: 446, Shore: 62 },
+    { HRC: 40, HB: 371, HV: 392, Shore: 56 },
+    { HRC: 35, HB: 327, HV: 345, Shore: 51 },
+    { HRC: 30, HB: 286, HV: 302, Shore: 45 },
+    { HRC: 25, HB: 253, HV: 266, Shore: 40 },
+    { HRC: 20, HB: 226, HV: 238, Shore: 36 },
+];
+/**
+ * Linear interpolation between two conversion rows based on a given scale value.
+ */
+function interpolate(scale, value, low, high) {
+    const t = (value - low[scale]) / (high[scale] - low[scale]);
+    return {
+        HRC: roundTo(low.HRC + t * (high.HRC - low.HRC), 1),
+        HB: roundTo(low.HB + t * (high.HB - low.HB), 0),
+        HV: roundTo(low.HV + t * (high.HV - low.HV), 0),
+        Shore: roundTo(low.Shore + t * (high.Shore - low.Shore), 1),
+    };
+}
+/**
+ * Convert a hardness value from one scale to all scales using
+ * linear interpolation on the conversion table.
+ */
+export function hardness(input) {
+    const { fromScale, value } = input;
+    // Sort table by the source scale ascending
+    const sorted = [...CONVERSION_TABLE].sort((a, b) => a[fromScale] - b[fromScale]);
+    // Clamp: if value is at or below the minimum row
+    if (value <= sorted[0][fromScale]) {
+        const row = sorted[0];
+        return {
+            HRC: row.HRC,
+            HB: row.HB,
+            HV: row.HV,
+            Shore: row.Shore,
+        };
+    }
+    // Clamp: if value is at or above the maximum row
+    if (value >= sorted[sorted.length - 1][fromScale]) {
+        const row = sorted[sorted.length - 1];
+        return {
+            HRC: row.HRC,
+            HB: row.HB,
+            HV: row.HV,
+            Shore: row.Shore,
+        };
+    }
+    // Find the two bracketing rows
+    for (let i = 0; i < sorted.length - 1; i++) {
+        const low = sorted[i];
+        const high = sorted[i + 1];
+        if (value >= low[fromScale] && value <= high[fromScale]) {
+            return interpolate(fromScale, value, low, high);
+        }
+    }
+    // Fallback (should not reach here)
+    const row = sorted[0];
+    return {
+        HRC: row.HRC,
+        HB: row.HB,
+        HV: row.HV,
+        Shore: row.Shore,
+    };
+}
+function roundTo(value, decimals) {
+    const factor = Math.pow(10, decimals);
+    return Math.round(value * factor) / factor;
+}
+//# sourceMappingURL=hardness.js.map

package/dist/metal/hardness.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"hardness.js","sourceRoot":"","sources":["../../src/metal/hardness.ts"],"names":[],"mappings":"AASA,2DAA2D;AAC3D,oFAAoF;AACpF,MAAM,CAAC,MAAM,gBAAgB,GAAoB;IAC/C,EAAE,GAAG,EAAE,EAAE,EAAE,EAAE,EAAE,GAAG,EAAE,EAAE,EAAE,GAAG,EAAE,KAAK,EAAE,EAAE,EAAE;IACxC,EAAE,GAAG,EAAE,EAAE,EAAE,EAAE,EAAE,GAAG,EAAE,EAAE,EAAE,GAAG,EAAE,KAAK,EAAE,EAAE,EAAE;IACxC,EAAE,GAAG,EAAE,EAAE,EAAE,EAAE,EAAE,GAAG,EAAE,EAAE,EAAE,GAAG,EAAE,KAAK,EAAE,EAAE,EAAE;IACxC,EAAE,GAAG,EAAE,EAAE,EAAE,EAAE,EAAE,GAAG,EAAE,EAAE,EAAE,GAAG,EAAE,KAAK,EAAE,EAAE,EAAE;IACxC,EAAE,GAAG,EAAE,EAAE,EAAE,EAAE,EAAE,GAAG,EAAE,EAAE,EAAE,GAAG,EAAE,KAAK,EAAE,EAAE,EAAE;IACxC,EAAE,GAAG,EAAE,EAAE,EAAE,EAAE,EAAE,GAAG,EAAE,EAAE,EAAE,GAAG,EAAE,KAAK,EAAE,EAAE,EAAE;IACxC,EAAE,GAAG,EAAE,EAAE,EAAE,EAAE,EAAE,GAAG,EAAE,EAAE,EAAE,GAAG,EAAE,KAAK,EAAE,EAAE,EAAE;IACxC,EAAE,GAAG,EAAE,EAAE,EAAE,EAAE,EAAE,GAAG,EAAE,EAAE,EAAE,GAAG,EAAE,KAAK,EAAE,EAAE,EAAE;IACxC,EAAE,GAAG,EAAE,EAAE,EAAE,EAAE,EAAE,GAAG,EAAE,EAAE,EAAE,GAAG,EAAE,KAAK,EAAE,EAAE,EAAE;IACxC,EAAE,GAAG,EAAE,EAAE,EAAE,EAAE,EAAE,GAAG,EAAE,EAAE,EAAE,GAAG,EAAE,KAAK,EAAE,EAAE,EAAE;IACxC,EAAE,GAAG,EAAE,EAAE,EAAE,EAAE,EAAE,GAAG,EAAE,EAAE,EAAE,GAAG,EAAE,KAAK,EAAE,EAAE,EAAE;CACzC,CAAC;AAEF;;GAEG;AACH,SAAS,WAAW,CAClB,KAAoB,EACpB,KAAa,EACb,GAAkB,EAClB,IAAmB;IAEnB,MAAM,CAAC,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,CAAC,CAAC,GAAG,CAAC,IAAI,CAAC,KAAK,CAAC,GAAG,GAAG,CAAC,KAAK,CAAC,CAAC,CAAC;IAC5D,OAAO;QACL,GAAG,EAAE,OAAO,CAAC,GAAG,CAAC,GAAG,GAAG,CAAC,GAAG,CAAC,IAAI,CAAC,GAAG,GAAG,GAAG,CAAC,GAAG,CAAC,EAAE,CAAC,CAAC;QACnD,EAAE,EAAE,OAAO,CAAC,GAAG,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,IAAI,CAAC,EAAE,GAAG,GAAG,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC;QAC/C,EAAE,EAAE,OAAO,CAAC,GAAG,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,IAAI,CAAC,EAAE,GAAG,GAAG,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC;QAC/C,KAAK,EAAE,OAAO,CAAC,GAAG,CAAC,KAAK,GAAG,CAAC,GAAG,CAAC,IAAI,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,CAAC,EAAE,CAAC,CAAC;KAC5D,CAAC;AACJ,CAAC;AAED;;;GAGG;AACH,MAAM,UAAU,QAAQ,CAAC,KAAoB;IAC3C,MAAM,EAAE,SAAS,EAAE,KAAK,EAAE,GAAG,KAAK,CAAC;IAEnC,2CAA2C;IAC3C,MAAM,MAAM,GAAG,CAAC,GAAG,gBAAgB,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,SAAS,CAAC,GAAG,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC;IAEjF,iDAAiD;IACjD,IAAI,KAAK,IAAI,MAAM,CAAC,CAAC,CAAC,CAAC,SAAS,CAAC,EAAE,CAAC;QAClC,MAAM,GAAG,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC;QACtB,OAAO;YACL,GAAG,EAAE,GAAG,CAAC,GAAG;YACZ,EAAE,EAAE,GAAG,CAAC,EAAE;YACV,EAAE,EAAE,GAAG,CAAC,EAAE;YACV,KAAK,EAAE,GAAG,CAAC,KAAK;SACjB,CAAC;IACJ,CAAC;IAED,iDAAiD;IACjD,IAAI,KAAK,IAAI,MAAM,CAAC,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC,SAAS,CAAC,EAAE,CAAC;QAClD,MAAM,GAAG,GAAG,MAAM,CAAC,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC;QACtC,OAAO;YACL,GAAG,EAAE,GAAG,CAAC,GAAG;YACZ,EAAE,EAAE,GAAG,CAAC,EAAE;YACV,EAAE,EAAE,GAAG,CAAC,EAAE;YACV,KAAK,EAAE,GAAG,CAAC,KAAK;SACjB,CAAC;IACJ,CAAC;IAED,+BAA+B;IAC/B,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC;QAC3C,MAAM,GAAG,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC;QACtB,MAAM,IAAI,GAAG,MAAM,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC;QAC3B,IAAI,KAAK,IAAI,GAAG,CAAC,SAAS,CAAC,IAAI,KAAK,IAAI,IAAI,CAAC,SAAS,CAAC,EAAE,CAAC;YACxD,OAAO,WAAW,CAAC,SAAS,EAAE,KAAK,EAAE,GAAG,EAAE,IAAI,CAAC,CAAC;QAClD,CAAC;IACH,CAAC;IAED,mCAAmC;IACnC,MAAM,GAAG,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC;IACtB,OAAO;QACL,GAAG,EAAE,GAAG,CAAC,GAAG;QACZ,EAAE,EAAE,GAAG,CAAC,EAAE;QACV,EAAE,EAAE,GAAG,CAAC,EAAE;QACV,KAAK,EAAE,GAAG,CAAC,KAAK;KACjB,CAAC;AACJ,CAAC;AAED,SAAS,OAAO,CAAC,KAAa,EAAE,QAAgB;IAC9C,MAAM,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,QAAQ,CAAC,CAAC;IACtC,OAAO,IAAI,CAAC,KAAK,CAAC,KAAK,GAAG,MAAM,CAAC,GAAG,MAAM,CAAC;AAC7C,CAAC"}

package/dist/metal/index.d.ts

@@ -0,0 +1,24 @@
+export type { MetalShape, MetalWeightInput, MetalWeightResult, BendingMaterial, ShapeType, BendAllowanceInput, BendAllowanceResult, FlatPatternInput, FlatPatternResult, KFactorReverseInput, KFactorReverseResult, PressOperation, BendType, PressTonnageInput, PressTonnageResult, BearingType, BearingInput, BearingResult, BoltCalculationMode, LubricationCondition, BoltInput, BoltResult, CuttingOperation, CuttingInput, CuttingResult, CuttingAlgorithm, CuttingPiece, CuttingStockInput, CuttingPattern, CuttingStockResult, GearCalculationMode, GearInput, GearResult, HardnessScale, HardnessInput, HardnessResult, MaterialCategory, MaterialInput, MaterialResult, MaterialSpec, PressFitInput, PressFitResult, RoughnessScale, RoughnessInput, RoughnessResult, PitchType, ScrewInput, ScrewResult, ScrewSpec, SpringMaterial, SpringInput, SpringResult, ThreadStandard, TapInput, TapResult, ThreadType, ThreadInput, ThreadResult, ThreadSpec, FitType, ToleranceInput, ToleranceResult, VibrationSystem, CrossSection, VibrationMaterial, VibrationInput, FrequencyMode, VibrationResult, WeldProcess, WeldBaseMetal, CrackingRisk, WeldHeatInput, WeldHeatResult, WeldingBaseMetal, JointType, WeldPosition, WeldingInput, WeldingRod, WeldingResult, } from './types.js';
+export { metalWeight } from './metalWeight.js';
+export { bendAllowance } from './bendAllowance.js';
+export { flatPattern } from './flatPattern.js';
+export { kFactorReverse } from './kFactorReverse.js';
+export { pressTonnage } from './pressTonnage.js';
+export { bearing } from './bearing.js';
+export { bolt, getKFactor, getStandardPitch } from './bolt.js';
+export { cutting } from './cutting.js';
+export { cuttingStock } from './cuttingStock.js';
+export { gear } from './gear.js';
+export { hardness, CONVERSION_TABLE } from './hardness.js';
+export { material, getCategories, getGrades } from './material.js';
+export { pressFit } from './pressFit.js';
+export { roughness } from './roughness.js';
+export { screw, getDesignations } from './screw.js';
+export { spring } from './spring.js';
+export { tap } from './tap.js';
+export { thread, getMetricSizes, getUnifiedSizes } from './thread.js';
+export { tolerance } from './tolerance.js';
+export { vibration } from './vibration.js';
+export { weldHeat } from './weldHeat.js';
+export { welding } from './welding.js';
+//# sourceMappingURL=index.d.ts.map

package/dist/metal/index.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../src/metal/index.ts"],"names":[],"mappings":"AACA,YAAY,EAEV,UAAU,EACV,gBAAgB,EAChB,iBAAiB,EAEjB,eAAe,EACf,SAAS,EACT,kBAAkB,EAClB,mBAAmB,EACnB,gBAAgB,EAChB,iBAAiB,EACjB,mBAAmB,EACnB,oBAAoB,EAEpB,cAAc,EACd,QAAQ,EACR,iBAAiB,EACjB,kBAAkB,EAElB,WAAW,EACX,YAAY,EACZ,aAAa,EAEb,mBAAmB,EACnB,oBAAoB,EACpB,SAAS,EACT,UAAU,EAEV,gBAAgB,EAChB,YAAY,EACZ,aAAa,EAEb,gBAAgB,EAChB,YAAY,EACZ,iBAAiB,EACjB,cAAc,EACd,kBAAkB,EAElB,mBAAmB,EACnB,SAAS,EACT,UAAU,EAEV,aAAa,EACb,aAAa,EACb,cAAc,EAEd,gBAAgB,EAChB,aAAa,EACb,cAAc,EACd,YAAY,EAEZ,aAAa,EACb,cAAc,EAEd,cAAc,EACd,cAAc,EACd,eAAe,EAEf,SAAS,EACT,UAAU,EACV,WAAW,EACX,SAAS,EAET,cAAc,EACd,WAAW,EACX,YAAY,EAEZ,cAAc,EACd,QAAQ,EACR,SAAS,EAET,UAAU,EACV,WAAW,EACX,YAAY,EACZ,UAAU,EAEV,OAAO,EACP,cAAc,EACd,eAAe,EAEf,eAAe,EACf,YAAY,EACZ,iBAAiB,EACjB,cAAc,EACd,aAAa,EACb,eAAe,EAEf,WAAW,EACX,aAAa,EACb,YAAY,EACZ,aAAa,EACb,cAAc,EAEd,gBAAgB,EAChB,SAAS,EACT,YAAY,EACZ,YAAY,EACZ,UAAU,EACV,aAAa,GACd,MAAM,YAAY,CAAC;AAGpB,OAAO,EAAE,WAAW,EAAE,MAAM,kBAAkB,CAAC;AAC/C,OAAO,EAAE,aAAa,EAAE,MAAM,oBAAoB,CAAC;AACnD,OAAO,EAAE,WAAW,EAAE,MAAM,kBAAkB,CAAC;AAC/C,OAAO,EAAE,cAAc,EAAE,MAAM,qBAAqB,CAAC;AACrD,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAmB,CAAC;AACjD,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC;AACvC,OAAO,EAAE,IAAI,EAAE,UAAU,EAAE,gBAAgB,EAAE,MAAM,WAAW,CAAC;AAC/D,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC;AACvC,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAmB,CAAC;AACjD,OAAO,EAAE,IAAI,EAAE,MAAM,WAAW,CAAC;AACjC,OAAO,EAAE,QAAQ,EAAE,gBAAgB,EAAE,MAAM,eAAe,CAAC;AAC3D,OAAO,EAAE,QAAQ,EAAE,aAAa,EAAE,SAAS,EAAE,MAAM,eAAe,CAAC;AACnE,OAAO,EAAE,QAAQ,EAAE,MAAM,eAAe,CAAC;AACzC,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,KAAK,EAAE,eAAe,EAAE,MAAM,YAAY,CAAC;AACpD,OAAO,EAAE,MAAM,EAAE,MAAM,aAAa,CAAC;AACrC,OAAO,EAAE,GAAG,EAAE,MAAM,UAAU,CAAC;AAC/B,OAAO,EAAE,MAAM,EAAE,cAAc,EAAE,eAAe,EAAE,MAAM,aAAa,CAAC;AACtE,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,QAAQ,EAAE,MAAM,eAAe,CAAC;AACzC,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC"}

package/dist/metal/index.js

@@ -0,0 +1,24 @@
+// Functions
+export { metalWeight } from './metalWeight.js';
+export { bendAllowance } from './bendAllowance.js';
+export { flatPattern } from './flatPattern.js';
+export { kFactorReverse } from './kFactorReverse.js';
+export { pressTonnage } from './pressTonnage.js';
+export { bearing } from './bearing.js';
+export { bolt, getKFactor, getStandardPitch } from './bolt.js';
+export { cutting } from './cutting.js';
+export { cuttingStock } from './cuttingStock.js';
+export { gear } from './gear.js';
+export { hardness, CONVERSION_TABLE } from './hardness.js';
+export { material, getCategories, getGrades } from './material.js';
+export { pressFit } from './pressFit.js';
+export { roughness } from './roughness.js';
+export { screw, getDesignations } from './screw.js';
+export { spring } from './spring.js';
+export { tap } from './tap.js';
+export { thread, getMetricSizes, getUnifiedSizes } from './thread.js';
+export { tolerance } from './tolerance.js';
+export { vibration } from './vibration.js';
+export { weldHeat } from './weldHeat.js';
+export { welding } from './welding.js';
+//# sourceMappingURL=index.js.map

package/dist/metal/index.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"index.js","sourceRoot":"","sources":["../../src/metal/index.ts"],"names":[],"mappings":"AAuGA,YAAY;AACZ,OAAO,EAAE,WAAW,EAAE,MAAM,kBAAkB,CAAC;AAC/C,OAAO,EAAE,aAAa,EAAE,MAAM,oBAAoB,CAAC;AACnD,OAAO,EAAE,WAAW,EAAE,MAAM,kBAAkB,CAAC;AAC/C,OAAO,EAAE,cAAc,EAAE,MAAM,qBAAqB,CAAC;AACrD,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAmB,CAAC;AACjD,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC;AACvC,OAAO,EAAE,IAAI,EAAE,UAAU,EAAE,gBAAgB,EAAE,MAAM,WAAW,CAAC;AAC/D,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC;AACvC,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAmB,CAAC;AACjD,OAAO,EAAE,IAAI,EAAE,MAAM,WAAW,CAAC;AACjC,OAAO,EAAE,QAAQ,EAAE,gBAAgB,EAAE,MAAM,eAAe,CAAC;AAC3D,OAAO,EAAE,QAAQ,EAAE,aAAa,EAAE,SAAS,EAAE,MAAM,eAAe,CAAC;AACnE,OAAO,EAAE,QAAQ,EAAE,MAAM,eAAe,CAAC;AACzC,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,KAAK,EAAE,eAAe,EAAE,MAAM,YAAY,CAAC;AACpD,OAAO,EAAE,MAAM,EAAE,MAAM,aAAa,CAAC;AACrC,OAAO,EAAE,GAAG,EAAE,MAAM,UAAU,CAAC;AAC/B,OAAO,EAAE,MAAM,EAAE,cAAc,EAAE,eAAe,EAAE,MAAM,aAAa,CAAC;AACtE,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,QAAQ,EAAE,MAAM,eAAe,CAAC;AACzC,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC"}

package/dist/metal/kFactorReverse.d.ts

@@ -0,0 +1,19 @@
+import type { KFactorReverseInput, KFactorReverseResult } from './types.js';
+/**
+ * Reverse calculate K-factor from measured flat length.
+ *
+ * Given the measured flat length and leg dimensions, derive the K-factor
+ * that would produce that flat length.
+ *
+ * Process:
+ * 1. Calculate bend deduction: BD = legA + legB - measuredFlatLength
+ * 2. Calculate OSSB: OSSB = (insideRadius + thickness) x tan(angle/2)
+ * 3. Calculate BA: BA = 2 x OSSB - BD
+ * 4. Solve for K: BA = angleRad x (insideRadius + K x thickness)
+ *    => K = (BA / angleRad - insideRadius) / thickness
+ *
+ * @param input - K-factor reverse input parameters
+ * @returns KFactorReverseResult with calculated K-factor
+ */
+export declare function kFactorReverse(input: KFactorReverseInput): KFactorReverseResult;
+//# sourceMappingURL=kFactorReverse.d.ts.map

package/dist/metal/kFactorReverse.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"kFactorReverse.d.ts","sourceRoot":"","sources":["../../src/metal/kFactorReverse.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,mBAAmB,EAAE,oBAAoB,EAAE,MAAM,YAAY,CAAC;AAE5E;;;;;;;;;;;;;;;GAeG;AACH,wBAAgB,cAAc,CAAC,KAAK,EAAE,mBAAmB,GAAG,oBAAoB,CAkC/E"}

package/dist/metal/kFactorReverse.js

@@ -0,0 +1,39 @@
+/**
+ * Reverse calculate K-factor from measured flat length.
+ *
+ * Given the measured flat length and leg dimensions, derive the K-factor
+ * that would produce that flat length.
+ *
+ * Process:
+ * 1. Calculate bend deduction: BD = legA + legB - measuredFlatLength
+ * 2. Calculate OSSB: OSSB = (insideRadius + thickness) x tan(angle/2)
+ * 3. Calculate BA: BA = 2 x OSSB - BD
+ * 4. Solve for K: BA = angleRad x (insideRadius + K x thickness)
+ *    => K = (BA / angleRad - insideRadius) / thickness
+ *
+ * @param input - K-factor reverse input parameters
+ * @returns KFactorReverseResult with calculated K-factor
+ */
+export function kFactorReverse(input) {
+    const { thickness, bendAngle, insideRadius, measuredFlatLength, legA, legB, } = input;
+    // Convert bend angle to radians
+    const bendAngleRad = (bendAngle * Math.PI) / 180;
+    // Calculate bend deduction from measured data
+    // For L-shape: measuredFlatLength = legA + legB - BD
+    // => BD = legA + legB - measuredFlatLength
+    const bd = legA + legB - measuredFlatLength;
+    // Calculate Outside Setback (OSSB)
+    const halfAngleRad = bendAngleRad / 2;
+    const ossb = (insideRadius + thickness) * Math.tan(halfAngleRad);
+    // Calculate Bend Allowance from BD and OSSB
+    // BD = 2 x OSSB - BA => BA = 2 x OSSB - BD
+    const ba = 2 * ossb - bd;
+    // Solve for K-factor from BA formula
+    // BA = angleRad x (insideRadius + K x thickness)
+    // => K = (BA / angleRad - insideRadius) / thickness
+    const kFactor = (ba / bendAngleRad - insideRadius) / thickness;
+    return {
+        kFactor,
+    };
+}
+//# sourceMappingURL=kFactorReverse.js.map

package/dist/metal/kFactorReverse.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"kFactorReverse.js","sourceRoot":"","sources":["../../src/metal/kFactorReverse.ts"],"names":[],"mappings":"AAEA;;;;;;;;;;;;;;;GAeG;AACH,MAAM,UAAU,cAAc,CAAC,KAA0B;IACvD,MAAM,EACJ,SAAS,EACT,SAAS,EACT,YAAY,EACZ,kBAAkB,EAClB,IAAI,EACJ,IAAI,GACL,GAAG,KAAK,CAAC;IAEV,gCAAgC;IAChC,MAAM,YAAY,GAAG,CAAC,SAAS,GAAG,IAAI,CAAC,EAAE,CAAC,GAAG,GAAG,CAAC;IAEjD,8CAA8C;IAC9C,qDAAqD;IACrD,2CAA2C;IAC3C,MAAM,EAAE,GAAG,IAAI,GAAG,IAAI,GAAG,kBAAkB,CAAC;IAE5C,mCAAmC;IACnC,MAAM,YAAY,GAAG,YAAY,GAAG,CAAC,CAAC;IACtC,MAAM,IAAI,GAAG,CAAC,YAAY,GAAG,SAAS,CAAC,GAAG,IAAI,CAAC,GAAG,CAAC,YAAY,CAAC,CAAC;IAEjE,4CAA4C;IAC5C,2CAA2C;IAC3C,MAAM,EAAE,GAAG,CAAC,GAAG,IAAI,GAAG,EAAE,CAAC;IAEzB,qCAAqC;IACrC,iDAAiD;IACjD,oDAAoD;IACpD,MAAM,OAAO,GAAG,CAAC,EAAE,GAAG,YAAY,GAAG,YAAY,CAAC,GAAG,SAAS,CAAC;IAE/D,OAAO;QACL,OAAO;KACR,CAAC;AACJ,CAAC"}

package/dist/metal/material.d.ts

@@ -0,0 +1,5 @@
+import type { MaterialCategory, MaterialInput, MaterialResult } from './types.js';
+export declare function getCategories(): MaterialCategory[];
+export declare function getGrades(category: MaterialCategory): string[];
+export declare function material(input: MaterialInput): MaterialResult | null;
+//# sourceMappingURL=material.d.ts.map

package/dist/metal/material.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"material.d.ts","sourceRoot":"","sources":["../../src/metal/material.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,gBAAgB,EAAE,aAAa,EAAE,cAAc,EAAgB,MAAM,YAAY,CAAC;AA8BhG,wBAAgB,aAAa,IAAI,gBAAgB,EAAE,CAElD;AAED,wBAAgB,SAAS,CAAC,QAAQ,EAAE,gBAAgB,GAAG,MAAM,EAAE,CAI9D;AAED,wBAAgB,QAAQ,CAAC,KAAK,EAAE,aAAa,GAAG,cAAc,GAAG,IAAI,CAkBpE"}