formulab 0.1.0

package/dist/logistics/types.d.ts

@@ -0,0 +1,315 @@
+/**
+ * Logistics Domain Types
+ */
+/**
+ * CBM (Cubic Meter) Calculation Types
+ */
+export type CbmLengthUnit = 'mm' | 'cm' | 'm';
+export interface CbmInput {
+    length: number;
+    width: number;
+    height: number;
+    quantity: number;
+    unit: CbmLengthUnit;
+}
+export interface CbmResult {
+    cbmPerUnit: number;
+    totalCbm: number;
+}
+/**
+ * Container Fit Calculation Types
+ */
+export interface ContainerDimensions {
+    length: number;
+    width: number;
+    height: number;
+}
+export interface CargoDimensions {
+    length: number;
+    width: number;
+    height: number;
+    weight: number;
+}
+export interface ContainerFitInput {
+    container: ContainerDimensions;
+    cargo: CargoDimensions;
+    allowRotation: boolean;
+}
+export interface BoxOrientation {
+    length: number;
+    width: number;
+    height: number;
+}
+export interface ContainerFitResult {
+    unitsPerLayer: number;
+    layers: number;
+    totalUnits: number;
+    bestOrientation: BoxOrientation;
+}
+/**
+ * EOQ (Economic Order Quantity) Types
+ */
+export interface EoqInput {
+    annualDemand: number;
+    orderCost: number;
+    holdingCost: number;
+}
+export interface EoqResult {
+    eoq: number;
+    ordersPerYear: number;
+    orderCycleDays: number;
+    annualOrderingCost: number;
+    annualHoldingCost: number;
+    totalAnnualCost: number;
+}
+/**
+ * Pallet Stack Calculation Types
+ */
+export interface PalletDimensions {
+    length: number;
+    width: number;
+}
+export interface BoxDimensions {
+    length: number;
+    width: number;
+    height: number;
+}
+export interface PalletStackInput {
+    pallet: PalletDimensions;
+    box: BoxDimensions;
+    maxHeight: number;
+    allowRotation: boolean;
+}
+export interface PalletStackResult {
+    boxesPerLayer: number;
+    layers: number;
+    totalBoxes: number;
+    bestOrientation: BoxOrientation;
+}
+/**
+ * Safety Stock Calculation Types
+ */
+export interface SafetyStockInput {
+    avgDemand: number;
+    demandStdDev: number;
+    avgLeadTime: number;
+    leadTimeStdDev: number;
+    serviceLevel: number;
+}
+export interface SafetyStockResult {
+    zScore: number;
+    safetyStock: number;
+    reorderPoint: number;
+    demandDuringLeadTime: number;
+}
+/**
+ * DIM Weight (Dimensional Weight) Types
+ */
+export type CarrierType = 'domestic_air' | 'international_air' | 'ground';
+export interface DimWeightInput {
+    length: number;
+    width: number;
+    height: number;
+    actualWeight: number;
+    carrier: CarrierType;
+}
+export interface DimWeightResult {
+    dimensionalWeight: number;
+    actualWeight: number;
+    billableWeight: number;
+    dimFactor: number;
+    isDimWeightHigher: boolean;
+}
+/**
+ * Fill Rate Types
+ */
+export type FillRateMode = 'order' | 'line';
+export interface FillRateInput {
+    mode: FillRateMode;
+    totalOrders: number;
+    filledComplete: number;
+}
+export interface FillRateResult {
+    fillRate: number;
+    shortfallRate: number;
+    filledComplete: number;
+    shortfall: number;
+}
+export interface ServiceLevelInput {
+    demandStdDev: number;
+    safetyStock: number;
+}
+export interface ServiceLevelResult {
+    zScore: number;
+    serviceLevel: number;
+    stockoutProbability: number;
+}
+/**
+ * Freight Class Types
+ */
+export interface FreightClassInput {
+    weight: number;
+    length: number;
+    width: number;
+    height: number;
+}
+export interface FreightClassResult {
+    density: number;
+    freightClass: number;
+    className: string;
+    volumeCuFt: number;
+}
+/**
+ * Kanban Types
+ */
+export interface KanbanInput {
+    dailyDemand: number;
+    leadTime: number;
+    safetyFactor: number;
+    containerQuantity: number;
+}
+export interface KanbanResult {
+    numberOfKanbans: number;
+    numberOfKanbansRounded: number;
+    demandDuringLeadTime: number;
+    safetyStock: number;
+    totalRequirement: number;
+}
+/**
+ * 3D Pallet Loading Types
+ */
+export type PalletStandard = 'eur' | 'us' | 'cn' | 'jp' | 'custom';
+export type RotationConstraint = 'full' | 'layered' | 'fixed';
+export interface BoxType3D {
+    id: string;
+    length: number;
+    width: number;
+    height: number;
+    weight: number;
+    quantity: number;
+    canRotate: RotationConstraint;
+    color?: string;
+}
+export interface Pallet3DInput {
+    palletStandard: PalletStandard;
+    maxStackHeight: number;
+    maxPayload: number;
+    boxes: BoxType3D[];
+    customLength?: number;
+    customWidth?: number;
+}
+export interface PlacedBox3D {
+    boxTypeId: string;
+    position: {
+        x: number;
+        y: number;
+        z: number;
+    };
+    dimensions: {
+        l: number;
+        w: number;
+        h: number;
+    };
+    rotationId: number;
+    color: string;
+    weight: number;
+}
+export interface Pallet3DResult {
+    placed: PlacedBox3D[];
+    unplaced: {
+        boxTypeId: string;
+        count: number;
+    }[];
+    utilization: {
+        volumePercent: number;
+        weightPercent: number;
+        floorPercent: number;
+    };
+    centerOfGravity: {
+        x: number;
+        y: number;
+        z: number;
+        isBalanced: boolean;
+    };
+    metrics: {
+        totalWeight: number;
+        totalBoxes: number;
+        totalLayers: number;
+        maxHeight: number;
+        wastedVolume: number;
+    };
+    palletDimensions: {
+        length: number;
+        width: number;
+        height: number;
+    };
+    warnings: string[];
+}
+export interface PalletSpec {
+    length: number;
+    width: number;
+    name: string;
+}
+/**
+ * Pick Time Types
+ */
+export type PickMode = 'single' | 'batch';
+export interface PickTimeInput {
+    mode: PickMode;
+    distance: number;
+    speed: number;
+    itemsPerOrder: number;
+    searchTimePerItem: number;
+    pickTimePerItem: number;
+    documentationTime: number;
+    batchSize?: number;
+}
+export interface PickTimeResult {
+    travelTime: number;
+    searchTime: number;
+    pickTime: number;
+    documentationTime: number;
+    totalTime: number;
+    totalTimeMinutes: number;
+    ordersPerHour: number;
+}
+/**
+ * Shipping Cost Types
+ */
+export type ShippingMode = 'ocean_fcl' | 'ocean_lcl' | 'air' | 'express' | 'truck';
+export interface ShippingInput {
+    mode: ShippingMode;
+    weight: number;
+    volume: number;
+    distance?: number;
+}
+export interface ShippingResult {
+    mode: string;
+    chargeableWeight: number;
+    volumetricWeight: number;
+    estimatedCost: number;
+    costPerKg: number;
+    transitDays: string;
+    notes: string;
+}
+/**
+ * TSP (Traveling Salesman Problem) Types
+ */
+export interface TspNode {
+    x: number;
+    y: number;
+    label?: string;
+}
+export interface TspInput {
+    nodes: TspNode[];
+}
+export interface TspResult {
+    nnTour: number[];
+    nnDistance: number;
+    optimizedTour: number[];
+    optimizedDistance: number;
+    improvementPercent: number;
+    optimalDistance?: number;
+    optimalityGap?: number;
+}
+//# sourceMappingURL=types.d.ts.map

package/dist/logistics/types.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"types.d.ts","sourceRoot":"","sources":["../../src/logistics/types.ts"],"names":[],"mappings":"AAAA;;GAEG;AAEH;;GAEG;AACH,MAAM,MAAM,aAAa,GAAG,IAAI,GAAG,IAAI,GAAG,GAAG,CAAC;AAE9C,MAAM,WAAW,QAAQ;IACvB,MAAM,EAAE,MAAM,CAAC;IACf,KAAK,EAAE,MAAM,CAAC;IACd,MAAM,EAAE,MAAM,CAAC;IACf,QAAQ,EAAE,MAAM,CAAC;IACjB,IAAI,EAAE,aAAa,CAAC;CACrB;AAED,MAAM,WAAW,SAAS;IACxB,UAAU,EAAE,MAAM,CAAC;IACnB,QAAQ,EAAE,MAAM,CAAC;CAClB;AAED;;GAEG;AACH,MAAM,WAAW,mBAAmB;IAClC,MAAM,EAAE,MAAM,CAAC;IACf,KAAK,EAAE,MAAM,CAAC;IACd,MAAM,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,eAAe;IAC9B,MAAM,EAAE,MAAM,CAAC;IACf,KAAK,EAAE,MAAM,CAAC;IACd,MAAM,EAAE,MAAM,CAAC;IACf,MAAM,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,iBAAiB;IAChC,SAAS,EAAE,mBAAmB,CAAC;IAC/B,KAAK,EAAE,eAAe,CAAC;IACvB,aAAa,EAAE,OAAO,CAAC;CACxB;AAED,MAAM,WAAW,cAAc;IAC7B,MAAM,EAAE,MAAM,CAAC;IACf,KAAK,EAAE,MAAM,CAAC;IACd,MAAM,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,kBAAkB;IACjC,aAAa,EAAE,MAAM,CAAC;IACtB,MAAM,EAAE,MAAM,CAAC;IACf,UAAU,EAAE,MAAM,CAAC;IACnB,eAAe,EAAE,cAAc,CAAC;CACjC;AAED;;GAEG;AACH,MAAM,WAAW,QAAQ;IACvB,YAAY,EAAE,MAAM,CAAC;IACrB,SAAS,EAAE,MAAM,CAAC;IAClB,WAAW,EAAE,MAAM,CAAC;CACrB;AAED,MAAM,WAAW,SAAS;IACxB,GAAG,EAAE,MAAM,CAAC;IACZ,aAAa,EAAE,MAAM,CAAC;IACtB,cAAc,EAAE,MAAM,CAAC;IACvB,kBAAkB,EAAE,MAAM,CAAC;IAC3B,iBAAiB,EAAE,MAAM,CAAC;IAC1B,eAAe,EAAE,MAAM,CAAC;CACzB;AAED;;GAEG;AACH,MAAM,WAAW,gBAAgB;IAC/B,MAAM,EAAE,MAAM,CAAC;IACf,KAAK,EAAE,MAAM,CAAC;CACf;AAED,MAAM,WAAW,aAAa;IAC5B,MAAM,EAAE,MAAM,CAAC;IACf,KAAK,EAAE,MAAM,CAAC;IACd,MAAM,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,gBAAgB;IAC/B,MAAM,EAAE,gBAAgB,CAAC;IACzB,GAAG,EAAE,aAAa,CAAC;IACnB,SAAS,EAAE,MAAM,CAAC;IAClB,aAAa,EAAE,OAAO,CAAC;CACxB;AAED,MAAM,WAAW,iBAAiB;IAChC,aAAa,EAAE,MAAM,CAAC;IACtB,MAAM,EAAE,MAAM,CAAC;IACf,UAAU,EAAE,MAAM,CAAC;IACnB,eAAe,EAAE,cAAc,CAAC;CACjC;AAED;;GAEG;AACH,MAAM,WAAW,gBAAgB;IAC/B,SAAS,EAAE,MAAM,CAAC;IAClB,YAAY,EAAE,MAAM,CAAC;IACrB,WAAW,EAAE,MAAM,CAAC;IACpB,cAAc,EAAE,MAAM,CAAC;IACvB,YAAY,EAAE,MAAM,CAAC;CACtB;AAED,MAAM,WAAW,iBAAiB;IAChC,MAAM,EAAE,MAAM,CAAC;IACf,WAAW,EAAE,MAAM,CAAC;IACpB,YAAY,EAAE,MAAM,CAAC;IACrB,oBAAoB,EAAE,MAAM,CAAC;CAC9B;AAED;;GAEG;AACH,MAAM,MAAM,WAAW,GAAG,cAAc,GAAG,mBAAmB,GAAG,QAAQ,CAAC;AAE1E,MAAM,WAAW,cAAc;IAC7B,MAAM,EAAE,MAAM,CAAC;IACf,KAAK,EAAE,MAAM,CAAC;IACd,MAAM,EAAE,MAAM,CAAC;IACf,YAAY,EAAE,MAAM,CAAC;IACrB,OAAO,EAAE,WAAW,CAAC;CACtB;AAED,MAAM,WAAW,eAAe;IAC9B,iBAAiB,EAAE,MAAM,CAAC;IAC1B,YAAY,EAAE,MAAM,CAAC;IACrB,cAAc,EAAE,MAAM,CAAC;IACvB,SAAS,EAAE,MAAM,CAAC;IAClB,iBAAiB,EAAE,OAAO,CAAC;CAC5B;AAED;;GAEG;AACH,MAAM,MAAM,YAAY,GAAG,OAAO,GAAG,MAAM,CAAC;AAE5C,MAAM,WAAW,aAAa;IAC5B,IAAI,EAAE,YAAY,CAAC;IACnB,WAAW,EAAE,MAAM,CAAC;IACpB,cAAc,EAAE,MAAM,CAAC;CACxB;AAED,MAAM,WAAW,cAAc;IAC7B,QAAQ,EAAE,MAAM,CAAC;IACjB,aAAa,EAAE,MAAM,CAAC;IACtB,cAAc,EAAE,MAAM,CAAC;IACvB,SAAS,EAAE,MAAM,CAAC;CACnB;AAED,MAAM,WAAW,iBAAiB;IAChC,YAAY,EAAE,MAAM,CAAC;IACrB,WAAW,EAAE,MAAM,CAAC;CACrB;AAED,MAAM,WAAW,kBAAkB;IACjC,MAAM,EAAE,MAAM,CAAC;IACf,YAAY,EAAE,MAAM,CAAC;IACrB,mBAAmB,EAAE,MAAM,CAAC;CAC7B;AAED;;GAEG;AACH,MAAM,WAAW,iBAAiB;IAChC,MAAM,EAAE,MAAM,CAAC;IACf,MAAM,EAAE,MAAM,CAAC;IACf,KAAK,EAAE,MAAM,CAAC;IACd,MAAM,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,kBAAkB;IACjC,OAAO,EAAE,MAAM,CAAC;IAChB,YAAY,EAAE,MAAM,CAAC;IACrB,SAAS,EAAE,MAAM,CAAC;IAClB,UAAU,EAAE,MAAM,CAAC;CACpB;AAED;;GAEG;AACH,MAAM,WAAW,WAAW;IAC1B,WAAW,EAAE,MAAM,CAAC;IACpB,QAAQ,EAAE,MAAM,CAAC;IACjB,YAAY,EAAE,MAAM,CAAC;IACrB,iBAAiB,EAAE,MAAM,CAAC;CAC3B;AAED,MAAM,WAAW,YAAY;IAC3B,eAAe,EAAE,MAAM,CAAC;IACxB,sBAAsB,EAAE,MAAM,CAAC;IAC/B,oBAAoB,EAAE,MAAM,CAAC;IAC7B,WAAW,EAAE,MAAM,CAAC;IACpB,gBAAgB,EAAE,MAAM,CAAC;CAC1B;AAED;;GAEG;AACH,MAAM,MAAM,cAAc,GAAG,KAAK,GAAG,IAAI,GAAG,IAAI,GAAG,IAAI,GAAG,QAAQ,CAAC;AAEnE,MAAM,MAAM,kBAAkB,GAAG,MAAM,GAAG,SAAS,GAAG,OAAO,CAAC;AAE9D,MAAM,WAAW,SAAS;IACxB,EAAE,EAAE,MAAM,CAAC;IACX,MAAM,EAAE,MAAM,CAAC;IACf,KAAK,EAAE,MAAM,CAAC;IACd,MAAM,EAAE,MAAM,CAAC;IACf,MAAM,EAAE,MAAM,CAAC;IACf,QAAQ,EAAE,MAAM,CAAC;IACjB,SAAS,EAAE,kBAAkB,CAAC;IAC9B,KAAK,CAAC,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,aAAa;IAC5B,cAAc,EAAE,cAAc,CAAC;IAC/B,cAAc,EAAE,MAAM,CAAC;IACvB,UAAU,EAAE,MAAM,CAAC;IACnB,KAAK,EAAE,SAAS,EAAE,CAAC;IACnB,YAAY,CAAC,EAAE,MAAM,CAAC;IACtB,WAAW,CAAC,EAAE,MAAM,CAAC;CACtB;AAED,MAAM,WAAW,WAAW;IAC1B,SAAS,EAAE,MAAM,CAAC;IAClB,QAAQ,EAAE;QAAE,CAAC,EAAE,MAAM,CAAC;QAAC,CAAC,EAAE,MAAM,CAAC;QAAC,CAAC,EAAE,MAAM,CAAA;KAAE,CAAC;IAC9C,UAAU,EAAE;QAAE,CAAC,EAAE,MAAM,CAAC;QAAC,CAAC,EAAE,MAAM,CAAC;QAAC,CAAC,EAAE,MAAM,CAAA;KAAE,CAAC;IAChD,UAAU,EAAE,MAAM,CAAC;IACnB,KAAK,EAAE,MAAM,CAAC;IACd,MAAM,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,cAAc;IAC7B,MAAM,EAAE,WAAW,EAAE,CAAC;IACtB,QAAQ,EAAE;QAAE,SAAS,EAAE,MAAM,CAAC;QAAC,KAAK,EAAE,MAAM,CAAA;KAAE,EAAE,CAAC;IACjD,WAAW,EAAE;QACX,aAAa,EAAE,MAAM,CAAC;QACtB,aAAa,EAAE,MAAM,CAAC;QACtB,YAAY,EAAE,MAAM,CAAC;KACtB,CAAC;IACF,eAAe,EAAE;QACf,CAAC,EAAE,MAAM,CAAC;QACV,CAAC,EAAE,MAAM,CAAC;QACV,CAAC,EAAE,MAAM,CAAC;QACV,UAAU,EAAE,OAAO,CAAC;KACrB,CAAC;IACF,OAAO,EAAE;QACP,WAAW,EAAE,MAAM,CAAC;QACpB,UAAU,EAAE,MAAM,CAAC;QACnB,WAAW,EAAE,MAAM,CAAC;QACpB,SAAS,EAAE,MAAM,CAAC;QAClB,YAAY,EAAE,MAAM,CAAC;KACtB,CAAC;IACF,gBAAgB,EAAE;QAChB,MAAM,EAAE,MAAM,CAAC;QACf,KAAK,EAAE,MAAM,CAAC;QACd,MAAM,EAAE,MAAM,CAAC;KAChB,CAAC;IACF,QAAQ,EAAE,MAAM,EAAE,CAAC;CACpB;AAED,MAAM,WAAW,UAAU;IACzB,MAAM,EAAE,MAAM,CAAC;IACf,KAAK,EAAE,MAAM,CAAC;IACd,IAAI,EAAE,MAAM,CAAC;CACd;AAED;;GAEG;AACH,MAAM,MAAM,QAAQ,GAAG,QAAQ,GAAG,OAAO,CAAC;AAE1C,MAAM,WAAW,aAAa;IAC5B,IAAI,EAAE,QAAQ,CAAC;IACf,QAAQ,EAAE,MAAM,CAAC;IACjB,KAAK,EAAE,MAAM,CAAC;IACd,aAAa,EAAE,MAAM,CAAC;IACtB,iBAAiB,EAAE,MAAM,CAAC;IAC1B,eAAe,EAAE,MAAM,CAAC;IACxB,iBAAiB,EAAE,MAAM,CAAC;IAC1B,SAAS,CAAC,EAAE,MAAM,CAAC;CACpB;AAED,MAAM,WAAW,cAAc;IAC7B,UAAU,EAAE,MAAM,CAAC;IACnB,UAAU,EAAE,MAAM,CAAC;IACnB,QAAQ,EAAE,MAAM,CAAC;IACjB,iBAAiB,EAAE,MAAM,CAAC;IAC1B,SAAS,EAAE,MAAM,CAAC;IAClB,gBAAgB,EAAE,MAAM,CAAC;IACzB,aAAa,EAAE,MAAM,CAAC;CACvB;AAED;;GAEG;AACH,MAAM,MAAM,YAAY,GAAG,WAAW,GAAG,WAAW,GAAG,KAAK,GAAG,SAAS,GAAG,OAAO,CAAC;AAEnF,MAAM,WAAW,aAAa;IAC5B,IAAI,EAAE,YAAY,CAAC;IACnB,MAAM,EAAE,MAAM,CAAC;IACf,MAAM,EAAE,MAAM,CAAC;IACf,QAAQ,CAAC,EAAE,MAAM,CAAC;CACnB;AAED,MAAM,WAAW,cAAc;IAC7B,IAAI,EAAE,MAAM,CAAC;IACb,gBAAgB,EAAE,MAAM,CAAC;IACzB,gBAAgB,EAAE,MAAM,CAAC;IACzB,aAAa,EAAE,MAAM,CAAC;IACtB,SAAS,EAAE,MAAM,CAAC;IAClB,WAAW,EAAE,MAAM,CAAC;IACpB,KAAK,EAAE,MAAM,CAAC;CACf;AAED;;GAEG;AACH,MAAM,WAAW,OAAO;IACtB,CAAC,EAAE,MAAM,CAAC;IACV,CAAC,EAAE,MAAM,CAAC;IACV,KAAK,CAAC,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,QAAQ;IACvB,KAAK,EAAE,OAAO,EAAE,CAAC;CAClB;AAED,MAAM,WAAW,SAAS;IACxB,MAAM,EAAE,MAAM,EAAE,CAAC;IACjB,UAAU,EAAE,MAAM,CAAC;IACnB,aAAa,EAAE,MAAM,EAAE,CAAC;IACxB,iBAAiB,EAAE,MAAM,CAAC;IAC1B,kBAAkB,EAAE,MAAM,CAAC;IAC3B,eAAe,CAAC,EAAE,MAAM,CAAC;IACzB,aAAa,CAAC,EAAE,MAAM,CAAC;CACxB"}

package/dist/logistics/types.js

@@ -0,0 +1,5 @@
+/**
+ * Logistics Domain Types
+ */
+export {};
+//# sourceMappingURL=types.js.map

package/dist/logistics/types.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"types.js","sourceRoot":"","sources":["../../src/logistics/types.ts"],"names":[],"mappings":"AAAA;;GAEG"}

package/dist/metal/bearing.d.ts

@@ -0,0 +1,11 @@
+import type { BearingInput, BearingResult } from './types.js';
+/**
+ * Calculate bearing L10 life.
+ * L10 = (C/P)^p x 10^6 revolutions
+ * L10h = L10 / (60 x rpm) hours
+ *
+ * p = 3 for ball bearings
+ * p = 10/3 for roller bearings
+ */
+export declare function bearing(input: BearingInput): BearingResult;
+//# sourceMappingURL=bearing.d.ts.map

package/dist/metal/bearing.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"bearing.d.ts","sourceRoot":"","sources":["../../src/metal/bearing.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,YAAY,EAAE,aAAa,EAAE,MAAM,YAAY,CAAC;AAE9D;;;;;;;GAOG;AACH,wBAAgB,OAAO,CAAC,KAAK,EAAE,YAAY,GAAG,aAAa,CAuB1D"}

package/dist/metal/bearing.js

@@ -0,0 +1,32 @@
+/**
+ * Calculate bearing L10 life.
+ * L10 = (C/P)^p x 10^6 revolutions
+ * L10h = L10 / (60 x rpm) hours
+ *
+ * p = 3 for ball bearings
+ * p = 10/3 for roller bearings
+ */
+export function bearing(input) {
+    const { bearingType, dynamicLoadRating, equivalentLoad, rpm } = input;
+    // Validate inputs
+    if (dynamicLoadRating <= 0 || equivalentLoad <= 0 || rpm <= 0) {
+        return { l10: 0, l10h: 0, lifeExponent: 0 };
+    }
+    // Life exponent: p = 3 for ball bearings, 10/3 for roller bearings
+    const lifeExponent = bearingType === 'ball' ? 3 : 10 / 3;
+    // L10 in million revolutions
+    const loadRatio = dynamicLoadRating / equivalentLoad;
+    const l10 = Math.pow(loadRatio, lifeExponent);
+    // L10h in hours: L10 x 10^6 / (60 x rpm)
+    const l10h = (l10 * 1_000_000) / (60 * rpm);
+    return {
+        l10: roundTo(l10, 2),
+        l10h: roundTo(l10h, 0),
+        lifeExponent: roundTo(lifeExponent, 3),
+    };
+}
+function roundTo(value, decimals) {
+    const factor = Math.pow(10, decimals);
+    return Math.round(value * factor) / factor;
+}
+//# sourceMappingURL=bearing.js.map

package/dist/metal/bearing.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"bearing.js","sourceRoot":"","sources":["../../src/metal/bearing.ts"],"names":[],"mappings":"AAEA;;;;;;;GAOG;AACH,MAAM,UAAU,OAAO,CAAC,KAAmB;IACzC,MAAM,EAAE,WAAW,EAAE,iBAAiB,EAAE,cAAc,EAAE,GAAG,EAAE,GAAG,KAAK,CAAC;IAEtE,kBAAkB;IAClB,IAAI,iBAAiB,IAAI,CAAC,IAAI,cAAc,IAAI,CAAC,IAAI,GAAG,IAAI,CAAC,EAAE,CAAC;QAC9D,OAAO,EAAE,GAAG,EAAE,CAAC,EAAE,IAAI,EAAE,CAAC,EAAE,YAAY,EAAE,CAAC,EAAE,CAAC;IAC9C,CAAC;IAED,mEAAmE;IACnE,MAAM,YAAY,GAAG,WAAW,KAAK,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC;IAEzD,6BAA6B;IAC7B,MAAM,SAAS,GAAG,iBAAiB,GAAG,cAAc,CAAC;IACrD,MAAM,GAAG,GAAG,IAAI,CAAC,GAAG,CAAC,SAAS,EAAE,YAAY,CAAC,CAAC;IAE9C,yCAAyC;IACzC,MAAM,IAAI,GAAG,CAAC,GAAG,GAAG,SAAS,CAAC,GAAG,CAAC,EAAE,GAAG,GAAG,CAAC,CAAC;IAE5C,OAAO;QACL,GAAG,EAAE,OAAO,CAAC,GAAG,EAAE,CAAC,CAAC;QACpB,IAAI,EAAE,OAAO,CAAC,IAAI,EAAE,CAAC,CAAC;QACtB,YAAY,EAAE,OAAO,CAAC,YAAY,EAAE,CAAC,CAAC;KACvC,CAAC;AACJ,CAAC;AAED,SAAS,OAAO,CAAC,KAAa,EAAE,QAAgB;IAC9C,MAAM,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,QAAQ,CAAC,CAAC;IACtC,OAAO,IAAI,CAAC,KAAK,CAAC,KAAK,GAAG,MAAM,CAAC,GAAG,MAAM,CAAC;AAC7C,CAAC"}

package/dist/metal/bendAllowance.d.ts

@@ -0,0 +1,13 @@
+import type { BendAllowanceInput, BendAllowanceResult } from './types.js';
+/**
+ * Calculate bend allowance and related bending parameters.
+ *
+ * Bend Allowance (BA) = (bend angle in radians) x (inside radius + K-factor x thickness)
+ * Outside Setback (OSSB) = (inside radius + thickness) x tan(bend angle / 2)
+ * Bend Deduction (BD) = 2 x OSSB - BA
+ *
+ * @param input - Bend allowance input parameters
+ * @returns BendAllowanceResult with BA, BD, OSSB, K-factor, recommended V-die, min bend radius
+ */
+export declare function bendAllowance(input: BendAllowanceInput): BendAllowanceResult;
+//# sourceMappingURL=bendAllowance.d.ts.map

package/dist/metal/bendAllowance.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"bendAllowance.d.ts","sourceRoot":"","sources":["../../src/metal/bendAllowance.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,kBAAkB,EAAE,mBAAmB,EAAmB,MAAM,YAAY,CAAC;AA8B3F;;;;;;;;;GASG;AACH,wBAAgB,aAAa,CAAC,KAAK,EAAE,kBAAkB,GAAG,mBAAmB,CAgD5E"}

package/dist/metal/bendAllowance.js

@@ -0,0 +1,75 @@
+/**
+ * Default K-factor values by material
+ * K-factor represents the position of the neutral axis relative to thickness
+ */
+const K_FACTOR_TABLE = {
+    mildSteel: 0.44,
+    stainless304: 0.45,
+    aluminum5052: 0.40,
+    aluminum6061: 0.42,
+    custom: 0.44,
+};
+/**
+ * Minimum bend radius multiplier (x thickness) by material
+ */
+const MIN_BEND_RADIUS_MULTIPLIER = {
+    mildSteel: 1.0,
+    stainless304: 2.0,
+    aluminum5052: 1.0,
+    aluminum6061: 1.5,
+    custom: 1.5,
+};
+/**
+ * V-die opening multiplier (standard is 8x thickness)
+ */
+const V_DIE_MULTIPLIER = 8;
+/**
+ * Calculate bend allowance and related bending parameters.
+ *
+ * Bend Allowance (BA) = (bend angle in radians) x (inside radius + K-factor x thickness)
+ * Outside Setback (OSSB) = (inside radius + thickness) x tan(bend angle / 2)
+ * Bend Deduction (BD) = 2 x OSSB - BA
+ *
+ * @param input - Bend allowance input parameters
+ * @returns BendAllowanceResult with BA, BD, OSSB, K-factor, recommended V-die, min bend radius
+ */
+export function bendAllowance(input) {
+    const { thickness, bendAngle, insideRadius, material = 'mildSteel' } = input;
+    const warnings = [];
+    // Get K-factor: use provided or default from table
+    const kFactor = input.kFactor ?? K_FACTOR_TABLE[material];
+    // Calculate minimum bend radius
+    const minBendRadius = MIN_BEND_RADIUS_MULTIPLIER[material] * thickness;
+    // Calculate recommended V-die opening
+    const recommendedVDie = Math.round(V_DIE_MULTIPLIER * thickness);
+    // Warn if inside radius is less than minimum
+    if (insideRadius < minBendRadius) {
+        warnings.push(`Inside radius (${insideRadius}mm) is less than minimum recommended (${minBendRadius}mm)`);
+    }
+    // Warn for extreme bend angles
+    if (bendAngle > 170) {
+        warnings.push(`Extreme bend angle (${bendAngle}) may cause springback issues`);
+    }
+    // Convert bend angle to radians
+    const bendAngleRad = (bendAngle * Math.PI) / 180;
+    // Calculate Bend Allowance (BA)
+    // BA = (angle in radians) x (inside radius + K-factor x thickness)
+    const ba = bendAngleRad * (insideRadius + kFactor * thickness);
+    // Calculate Outside Setback (OSSB)
+    // OSSB = (inside radius + thickness) x tan(angle / 2)
+    const halfAngleRad = bendAngleRad / 2;
+    const ossb = (insideRadius + thickness) * Math.tan(halfAngleRad);
+    // Calculate Bend Deduction (BD)
+    // BD = 2 x OSSB - BA
+    const bd = 2 * ossb - ba;
+    return {
+        bendAllowance: ba,
+        bendDeduction: bd,
+        outsideSetback: ossb,
+        kFactor,
+        recommendedVDie,
+        minBendRadius,
+        warnings,
+    };
+}
+//# sourceMappingURL=bendAllowance.js.map

package/dist/metal/bendAllowance.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"bendAllowance.js","sourceRoot":"","sources":["../../src/metal/bendAllowance.ts"],"names":[],"mappings":"AAEA;;;GAGG;AACH,MAAM,cAAc,GAAoC;IACtD,SAAS,EAAE,IAAI;IACf,YAAY,EAAE,IAAI;IAClB,YAAY,EAAE,IAAI;IAClB,YAAY,EAAE,IAAI;IAClB,MAAM,EAAE,IAAI;CACb,CAAC;AAEF;;GAEG;AACH,MAAM,0BAA0B,GAAoC;IAClE,SAAS,EAAE,GAAG;IACd,YAAY,EAAE,GAAG;IACjB,YAAY,EAAE,GAAG;IACjB,YAAY,EAAE,GAAG;IACjB,MAAM,EAAE,GAAG;CACZ,CAAC;AAEF;;GAEG;AACH,MAAM,gBAAgB,GAAG,CAAC,CAAC;AAE3B;;;;;;;;;GASG;AACH,MAAM,UAAU,aAAa,CAAC,KAAyB;IACrD,MAAM,EAAE,SAAS,EAAE,SAAS,EAAE,YAAY,EAAE,QAAQ,GAAG,WAAW,EAAE,GAAG,KAAK,CAAC;IAC7E,MAAM,QAAQ,GAAa,EAAE,CAAC;IAE9B,mDAAmD;IACnD,MAAM,OAAO,GAAG,KAAK,CAAC,OAAO,IAAI,cAAc,CAAC,QAAQ,CAAC,CAAC;IAE1D,gCAAgC;IAChC,MAAM,aAAa,GAAG,0BAA0B,CAAC,QAAQ,CAAC,GAAG,SAAS,CAAC;IAEvE,sCAAsC;IACtC,MAAM,eAAe,GAAG,IAAI,CAAC,KAAK,CAAC,gBAAgB,GAAG,SAAS,CAAC,CAAC;IAEjE,6CAA6C;IAC7C,IAAI,YAAY,GAAG,aAAa,EAAE,CAAC;QACjC,QAAQ,CAAC,IAAI,CAAC,kBAAkB,YAAY,yCAAyC,aAAa,KAAK,CAAC,CAAC;IAC3G,CAAC;IAED,+BAA+B;IAC/B,IAAI,SAAS,GAAG,GAAG,EAAE,CAAC;QACpB,QAAQ,CAAC,IAAI,CAAC,uBAAuB,SAAS,+BAA+B,CAAC,CAAC;IACjF,CAAC;IAED,gCAAgC;IAChC,MAAM,YAAY,GAAG,CAAC,SAAS,GAAG,IAAI,CAAC,EAAE,CAAC,GAAG,GAAG,CAAC;IAEjD,gCAAgC;IAChC,mEAAmE;IACnE,MAAM,EAAE,GAAG,YAAY,GAAG,CAAC,YAAY,GAAG,OAAO,GAAG,SAAS,CAAC,CAAC;IAE/D,mCAAmC;IACnC,sDAAsD;IACtD,MAAM,YAAY,GAAG,YAAY,GAAG,CAAC,CAAC;IACtC,MAAM,IAAI,GAAG,CAAC,YAAY,GAAG,SAAS,CAAC,GAAG,IAAI,CAAC,GAAG,CAAC,YAAY,CAAC,CAAC;IAEjE,gCAAgC;IAChC,qBAAqB;IACrB,MAAM,EAAE,GAAG,CAAC,GAAG,IAAI,GAAG,EAAE,CAAC;IAEzB,OAAO;QACL,aAAa,EAAE,EAAE;QACjB,aAAa,EAAE,EAAE;QACjB,cAAc,EAAE,IAAI;QACpB,OAAO;QACP,eAAe;QACf,aAAa;QACb,QAAQ;KACT,CAAC;AACJ,CAAC"}

package/dist/metal/bolt.d.ts

@@ -0,0 +1,32 @@
+import type { BoltInput, BoltResult } from './types.js';
+/**
+ * Calculate bolt torque and preload relationship.
+ *
+ * Formulas:
+ * - T = K * D * F (Torque-tension relationship)
+ *   T = torque (N-m)
+ *   K = nut factor (K-factor), typically 0.15-0.25
+ *   D = nominal bolt diameter (mm)
+ *   F = preload force (N)
+ *
+ * - Tensile stress area: As = (pi/4) * (d - 0.9382*p)^2
+ *   (ISO metric thread formula)
+ *
+ * K-factor typical values:
+ * - Dry (unlubricated): 0.20
+ * - Oiled (machine oil): 0.15
+ * - Moly (MoS2 grease): 0.12
+ * - PTFE (Teflon): 0.10
+ *
+ * Reference: Machinery's Handbook, VDI 2230
+ */
+export declare function bolt(input: BoltInput): BoltResult;
+/**
+ * Get K-factor for common lubrication conditions
+ */
+export declare function getKFactor(condition: string): number;
+/**
+ * Get standard ISO metric thread pitch for nominal diameter
+ */
+export declare function getStandardPitch(diameter: number): number;
+//# sourceMappingURL=bolt.d.ts.map

package/dist/metal/bolt.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"bolt.d.ts","sourceRoot":"","sources":["../../src/metal/bolt.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,SAAS,EAAE,UAAU,EAAE,MAAM,YAAY,CAAC;AAExD;;;;;;;;;;;;;;;;;;;;GAoBG;AACH,wBAAgB,IAAI,CAAC,KAAK,EAAE,SAAS,GAAG,UAAU,CAiGjD;AAED;;GAEG;AACH,wBAAgB,UAAU,CAAC,SAAS,EAAE,MAAM,GAAG,MAAM,CAQpD;AAED;;GAEG;AACH,wBAAgB,gBAAgB,CAAC,QAAQ,EAAE,MAAM,GAAG,MAAM,CAyBzD"}

package/dist/metal/bolt.js

@@ -0,0 +1,149 @@
+/**
+ * Calculate bolt torque and preload relationship.
+ *
+ * Formulas:
+ * - T = K * D * F (Torque-tension relationship)
+ *   T = torque (N-m)
+ *   K = nut factor (K-factor), typically 0.15-0.25
+ *   D = nominal bolt diameter (mm)
+ *   F = preload force (N)
+ *
+ * - Tensile stress area: As = (pi/4) * (d - 0.9382*p)^2
+ *   (ISO metric thread formula)
+ *
+ * K-factor typical values:
+ * - Dry (unlubricated): 0.20
+ * - Oiled (machine oil): 0.15
+ * - Moly (MoS2 grease): 0.12
+ * - PTFE (Teflon): 0.10
+ *
+ * Reference: Machinery's Handbook, VDI 2230
+ */
+export function bolt(input) {
+    const { mode, diameter, pitch, torque: inputTorque, preload: inputPreload, kFactor, tensileStrength, } = input;
+    // Validate inputs
+    if (diameter <= 0 || pitch <= 0 || kFactor <= 0 || tensileStrength <= 0) {
+        return {
+            torque: 0,
+            preload: 0,
+            preloadN: 0,
+            stressArea: 0,
+            tensileStress: 0,
+            strengthUtilization: 0,
+            kFactor: 0,
+            recommendedMaxPreload: 0,
+        };
+    }
+    // Calculate tensile stress area (ISO metric thread)
+    // As = (pi/4) * (d - 0.9382*p)^2
+    const d_stress = diameter - 0.9382 * pitch;
+    const stressArea = (Math.PI / 4) * d_stress * d_stress;
+    let torque;
+    let preloadN;
+    if (mode === 'torqueToPreload') {
+        // Given torque, calculate preload
+        torque = inputTorque ?? 0;
+        if (torque <= 0) {
+            return {
+                torque: 0,
+                preload: 0,
+                preloadN: 0,
+                stressArea: roundTo(stressArea, 2),
+                tensileStress: 0,
+                strengthUtilization: 0,
+                kFactor,
+                recommendedMaxPreload: 0,
+            };
+        }
+        // T = K * D * F => F = T / (K * D)
+        // T in N-m, D in mm => need to convert D to m: D/1000
+        // F = T / (K * D/1000) = T * 1000 / (K * D)
+        preloadN = (torque * 1000) / (kFactor * diameter);
+    }
+    else {
+        // Given preload, calculate torque
+        const preloadKN = inputPreload ?? 0;
+        if (preloadKN <= 0) {
+            return {
+                torque: 0,
+                preload: 0,
+                preloadN: 0,
+                stressArea: roundTo(stressArea, 2),
+                tensileStress: 0,
+                strengthUtilization: 0,
+                kFactor,
+                recommendedMaxPreload: 0,
+            };
+        }
+        preloadN = preloadKN * 1000;
+        // T = K * D * F
+        // T in N-m, D in mm, F in N => T = K * (D/1000) * F
+        torque = kFactor * (diameter / 1000) * preloadN;
+    }
+    const preloadKN = preloadN / 1000;
+    // Tensile stress = F / As
+    const tensileStress = preloadN / stressArea;
+    // Strength utilization (percentage of tensile strength)
+    const strengthUtilization = (tensileStress / tensileStrength) * 100;
+    // Recommended max preload at 75% of tensile strength
+    // (typical design guideline for static loading)
+    const maxStress = tensileStrength * 0.75;
+    const recommendedMaxPreloadN = maxStress * stressArea;
+    const recommendedMaxPreload = recommendedMaxPreloadN / 1000;
+    return {
+        torque: roundTo(torque, 2),
+        preload: roundTo(preloadKN, 3),
+        preloadN: roundTo(preloadN, 1),
+        stressArea: roundTo(stressArea, 2),
+        tensileStress: roundTo(tensileStress, 1),
+        strengthUtilization: roundTo(strengthUtilization, 1),
+        kFactor: roundTo(kFactor, 3),
+        recommendedMaxPreload: roundTo(recommendedMaxPreload, 2),
+    };
+}
+/**
+ * Get K-factor for common lubrication conditions
+ */
+export function getKFactor(condition) {
+    const factors = {
+        dry: 0.20,
+        oiled: 0.15,
+        moly: 0.12,
+        ptfe: 0.10,
+    };
+    return factors[condition] ?? 0.20;
+}
+/**
+ * Get standard ISO metric thread pitch for nominal diameter
+ */
+export function getStandardPitch(diameter) {
+    const pitches = {
+        3: 0.5,
+        4: 0.7,
+        5: 0.8,
+        6: 1.0,
+        8: 1.25,
+        10: 1.5,
+        12: 1.75,
+        14: 2.0,
+        16: 2.0,
+        18: 2.5,
+        20: 2.5,
+        22: 2.5,
+        24: 3.0,
+        27: 3.0,
+        30: 3.5,
+        33: 3.5,
+        36: 4.0,
+        39: 4.0,
+        42: 4.5,
+        45: 4.5,
+        48: 5.0,
+    };
+    return pitches[diameter] ?? (diameter >= 6 ? diameter * 0.125 : 0.5);
+}
+function roundTo(value, decimals) {
+    const factor = Math.pow(10, decimals);
+    return Math.round(value * factor) / factor;
+}
+//# sourceMappingURL=bolt.js.map

package/dist/metal/bolt.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"bolt.js","sourceRoot":"","sources":["../../src/metal/bolt.ts"],"names":[],"mappings":"AAEA;;;;;;;;;;;;;;;;;;;;GAoBG;AACH,MAAM,UAAU,IAAI,CAAC,KAAgB;IACnC,MAAM,EACJ,IAAI,EACJ,QAAQ,EACR,KAAK,EACL,MAAM,EAAE,WAAW,EACnB,OAAO,EAAE,YAAY,EACrB,OAAO,EACP,eAAe,GAChB,GAAG,KAAK,CAAC;IAEV,kBAAkB;IAClB,IAAI,QAAQ,IAAI,CAAC,IAAI,KAAK,IAAI,CAAC,IAAI,OAAO,IAAI,CAAC,IAAI,eAAe,IAAI,CAAC,EAAE,CAAC;QACxE,OAAO;YACL,MAAM,EAAE,CAAC;YACT,OAAO,EAAE,CAAC;YACV,QAAQ,EAAE,CAAC;YACX,UAAU,EAAE,CAAC;YACb,aAAa,EAAE,CAAC;YAChB,mBAAmB,EAAE,CAAC;YACtB,OAAO,EAAE,CAAC;YACV,qBAAqB,EAAE,CAAC;SACzB,CAAC;IACJ,CAAC;IAED,oDAAoD;IACpD,iCAAiC;IACjC,MAAM,QAAQ,GAAG,QAAQ,GAAG,MAAM,GAAG,KAAK,CAAC;IAC3C,MAAM,UAAU,GAAG,CAAC,IAAI,CAAC,EAAE,GAAG,CAAC,CAAC,GAAG,QAAQ,GAAG,QAAQ,CAAC;IAEvD,IAAI,MAAc,CAAC;IACnB,IAAI,QAAgB,CAAC;IAErB,IAAI,IAAI,KAAK,iBAAiB,EAAE,CAAC;QAC/B,kCAAkC;QAClC,MAAM,GAAG,WAAW,IAAI,CAAC,CAAC;QAC1B,IAAI,MAAM,IAAI,CAAC,EAAE,CAAC;YAChB,OAAO;gBACL,MAAM,EAAE,CAAC;gBACT,OAAO,EAAE,CAAC;gBACV,QAAQ,EAAE,CAAC;gBACX,UAAU,EAAE,OAAO,CAAC,UAAU,EAAE,CAAC,CAAC;gBAClC,aAAa,EAAE,CAAC;gBAChB,mBAAmB,EAAE,CAAC;gBACtB,OAAO;gBACP,qBAAqB,EAAE,CAAC;aACzB,CAAC;QACJ,CAAC;QACD,mCAAmC;QACnC,sDAAsD;QACtD,4CAA4C;QAC5C,QAAQ,GAAG,CAAC,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,OAAO,GAAG,QAAQ,CAAC,CAAC;IACpD,CAAC;SAAM,CAAC;QACN,kCAAkC;QAClC,MAAM,SAAS,GAAG,YAAY,IAAI,CAAC,CAAC;QACpC,IAAI,SAAS,IAAI,CAAC,EAAE,CAAC;YACnB,OAAO;gBACL,MAAM,EAAE,CAAC;gBACT,OAAO,EAAE,CAAC;gBACV,QAAQ,EAAE,CAAC;gBACX,UAAU,EAAE,OAAO,CAAC,UAAU,EAAE,CAAC,CAAC;gBAClC,aAAa,EAAE,CAAC;gBAChB,mBAAmB,EAAE,CAAC;gBACtB,OAAO;gBACP,qBAAqB,EAAE,CAAC;aACzB,CAAC;QACJ,CAAC;QACD,QAAQ,GAAG,SAAS,GAAG,IAAI,CAAC;QAC5B,gBAAgB;QAChB,oDAAoD;QACpD,MAAM,GAAG,OAAO,GAAG,CAAC,QAAQ,GAAG,IAAI,CAAC,GAAG,QAAQ,CAAC;IAClD,CAAC;IAED,MAAM,SAAS,GAAG,QAAQ,GAAG,IAAI,CAAC;IAElC,0BAA0B;IAC1B,MAAM,aAAa,GAAG,QAAQ,GAAG,UAAU,CAAC;IAE5C,wDAAwD;IACxD,MAAM,mBAAmB,GAAG,CAAC,aAAa,GAAG,eAAe,CAAC,GAAG,GAAG,CAAC;IAEpE,qDAAqD;IACrD,gDAAgD;IAChD,MAAM,SAAS,GAAG,eAAe,GAAG,IAAI,CAAC;IACzC,MAAM,sBAAsB,GAAG,SAAS,GAAG,UAAU,CAAC;IACtD,MAAM,qBAAqB,GAAG,sBAAsB,GAAG,IAAI,CAAC;IAE5D,OAAO;QACL,MAAM,EAAE,OAAO,CAAC,MAAM,EAAE,CAAC,CAAC;QAC1B,OAAO,EAAE,OAAO,CAAC,SAAS,EAAE,CAAC,CAAC;QAC9B,QAAQ,EAAE,OAAO,CAAC,QAAQ,EAAE,CAAC,CAAC;QAC9B,UAAU,EAAE,OAAO,CAAC,UAAU,EAAE,CAAC,CAAC;QAClC,aAAa,EAAE,OAAO,CAAC,aAAa,EAAE,CAAC,CAAC;QACxC,mBAAmB,EAAE,OAAO,CAAC,mBAAmB,EAAE,CAAC,CAAC;QACpD,OAAO,EAAE,OAAO,CAAC,OAAO,EAAE,CAAC,CAAC;QAC5B,qBAAqB,EAAE,OAAO,CAAC,qBAAqB,EAAE,CAAC,CAAC;KACzD,CAAC;AACJ,CAAC;AAED;;GAEG;AACH,MAAM,UAAU,UAAU,CAAC,SAAiB;IAC1C,MAAM,OAAO,GAA2B;QACtC,GAAG,EAAE,IAAI;QACT,KAAK,EAAE,IAAI;QACX,IAAI,EAAE,IAAI;QACV,IAAI,EAAE,IAAI;KACX,CAAC;IACF,OAAO,OAAO,CAAC,SAAS,CAAC,IAAI,IAAI,CAAC;AACpC,CAAC;AAED;;GAEG;AACH,MAAM,UAAU,gBAAgB,CAAC,QAAgB;IAC/C,MAAM,OAAO,GAA2B;QACtC,CAAC,EAAE,GAAG;QACN,CAAC,EAAE,GAAG;QACN,CAAC,EAAE,GAAG;QACN,CAAC,EAAE,GAAG;QACN,CAAC,EAAE,IAAI;QACP,EAAE,EAAE,GAAG;QACP,EAAE,EAAE,IAAI;QACR,EAAE,EAAE,GAAG;QACP,EAAE,EAAE,GAAG;QACP,EAAE,EAAE,GAAG;QACP,EAAE,EAAE,GAAG;QACP,EAAE,EAAE,GAAG;QACP,EAAE,EAAE,GAAG;QACP,EAAE,EAAE,GAAG;QACP,EAAE,EAAE,GAAG;QACP,EAAE,EAAE,GAAG;QACP,EAAE,EAAE,GAAG;QACP,EAAE,EAAE,GAAG;QACP,EAAE,EAAE,GAAG;QACP,EAAE,EAAE,GAAG;QACP,EAAE,EAAE,GAAG;KACR,CAAC;IACF,OAAO,OAAO,CAAC,QAAQ,CAAC,IAAI,CAAC,QAAQ,IAAI,CAAC,CAAC,CAAC,CAAC,QAAQ,GAAG,KAAK,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;AACvE,CAAC;AAED,SAAS,OAAO,CAAC,KAAa,EAAE,QAAgB;IAC9C,MAAM,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,QAAQ,CAAC,CAAC;IACtC,OAAO,IAAI,CAAC,KAAK,CAAC,KAAK,GAAG,MAAM,CAAC,GAAG,MAAM,CAAC;AAC7C,CAAC"}