@xgent-ai/skills 0.1.0 → 0.3.0

package/vendor/impeccable/bundle/blobs/0617b37a905f0486c1ab4e91a287c8ef8292e253095c340f452d591206272f73

@@ -0,0 +1,104 @@
+One-time live-mode project setup. Loaded from [live.md](live.md) only when `impeccable live` reports `config_missing` / `config_invalid`, when `configDrift` needs handling, or when the config lacks `cspChecked`. Not part of the per-session hot path.
+
+## Write the config
+
+Create the file at the `path` the boot reported (default `.impeccable/live/config.json`):
+
+```json
+{
+  "files": ["<path-or-glob>", "<path-or-glob>", ...],
+  "exclude": ["<optional-glob>", ...],
+  "insertBefore": "</body>",
+  "commentSyntax": "html",
+  "cspChecked": true
+}
+```
+
+`files` is the inject target: **the HTML files the browser actually loads**, not necessarily source (tracked vs generated does not matter here; wrap has its own generated-file guard). Entries are literal paths or globs. `exclude` (optional) skips files a `files` glob would otherwise include (email templates, demo fixtures). `cspChecked` records that the CSP step below has run; absent on first setup.
+
+**Hard-excluded paths (cannot be overridden):** `**/node_modules/**` and `**/.git/**`; injecting there would instrument third-party code.
+
+**Glob syntax:** `**` matches any number of segments (including zero), `*` matches within a segment, `?` matches one character. Paths are project-root-relative with forward slashes.
+
+| Framework | `files` | `insertBefore` | `commentSyntax` |
+|-----------|---------|----------------|-----------------|
+| SPA with single shell (Vite / React / Plain HTML) | `["index.html"]` | `</body>` | `html` |
+| Next.js (App Router) | `["app/layout.tsx"]` | `</body>` | `jsx` |
+| Next.js (Pages) | `["pages/_document.tsx"]` | `</body>` | `jsx` |
+| Nuxt | `["app.vue"]` | `</body>` | `html` |
+| Svelte / SvelteKit | `["src/app.html"]` | `</body>` | `html` |
+| TanStack Router (SPA, Vite) | `["index.html"]` | `</body>` | `html` |
+| TanStack Start (SSR) | `["src/routes/__root.tsx"]` | `<Scripts` | `jsx` |
+| Astro | `[" <root layout .astro>"]` | `</body>` | `html` |
+| Multi-page (separate HTML per route) | `["public/**/*.html"]` glob over the served dir | `</body>` | `html` |
+
+Pick an anchor that exists in every file (`</body>` almost always works); `insertAfter` matches after a line instead. For multi-page sites prefer a glob so new pages are picked up automatically. For sites whose pages are rebuilt by a generator, the inject survives only until the next regeneration: re-run `impeccable live` after each build (accept is unaffected; it writes true source via the fallback flow).
+
+**Framework adapters (auto-detected at inject time).** Every inject records what it wrote in `.impeccable/live/inject-journal.json`; the next inject or remove heals artifacts a crash or wrong-directory stop left behind. SvelteKit, Nuxt, and TanStack Start server-render their document shell, so a raw `<script>` in the entry template will not execute reliably; `impeccable live-inject` detects them and routes to a dedicated adapter (SvelteKit: dev-only root component from `+layout.svelte`; Nuxt: dev-only `.client.ts` plugin; TanStack Start: a generated dev-only `ImpeccableLiveRoot` component in `__root`). The `files` value stays a valid detection/CSP hint but is not the literal insertion site. A plain TanStack Router SPA takes the baseline Vite path.
+
+## Config drift
+
+On every boot the project is scanned for HTML files under common page roots (`public/`, `src/`, `app/`, `pages/`) that the resolved `files` list does not cover; they surface as `configDrift.orphans` with a hint. Tell the user once per session which files are uncovered and offer to add them or switch `files` to a glob. Never auto-update the config; the user decides. `configDrift` is `null` when there is no drift.
+
+## CSP detection (first-time only)
+
+Keep all allowances below development-only, including manual middleware and meta-tag edits. Do not change a deployed production site's CSP to load the localhost helper; see [live.md](live.md) for production inspection alternatives.
+
+If `config.cspChecked === true`, skip this whole section; the user was already asked once.
+
+```bash
+.trae-cn/skills/impeccable/scripts/impeccable detect-csp
+```
+
+Output `{ shape, signals }`; the shape names the *patch mechanism*, so one template covers many frameworks:
+
+- **`null`**: no CSP; write the config with `cspChecked: true` and stop here.
+- **`append-arrays`**: CSP as structured directive arrays; auto-patchable (monorepo helpers with `additionalScriptSrc`/`additionalConnectSrc`, SvelteKit `kit.csp.directives`, Nuxt `nuxt-security`).
+- **`append-string`**: CSP as a literal value string; auto-patchable (inline `next.config.*` `headers()`, Nuxt `routeRules`).
+- **`middleware`** / **`meta-tag`**: detected but not auto-patched. Show the user the detected files, ask them to add `http://localhost:8400` to `script-src` and `connect-src` manually, then mark `cspChecked: true` and proceed.
+
+### Consent prompt (use this phrasing)
+
+> **CSP patch needed.** I detected a Content Security Policy in your project that blocks `http://localhost:8400`: the live picker won't load without an allowance. Here's the change I'd make:
+>
+> ```diff
+> [file: <patchTarget>]
+> [exact diff, 2-5 lines]
+> ```
+>
+> It's guarded by `NODE_ENV === "development"` so the extra entry only appears in dev and never reaches production. You can remove it any time by reverting this file. Apply? [y/n]
+
+On "no": skip the patch, note that live will not work until the allowance is added manually, and still write `cspChecked: true` (the question has been asked). On "yes": apply the shape's patch below, then write `cspChecked: true`.
+
+### append-arrays
+
+Declare near the top of the file that holds the CSP arrays, then append `...__impeccableLiveDev` to the script-src and connect-src arrays:
+
+```ts
+// Dev-only allowance so impeccable live mode can load. Guarded by NODE_ENV.
+const __impeccableLiveDev =
+  process.env.NODE_ENV === "development" ? ["http://localhost:8400"] : [];
+```
+
+Per-framework: Next.js + monorepo helper: edit the *app's* `next.config.*` (not the shared helper), appending to `additionalScriptSrc` / `additionalConnectSrc`. SvelteKit: `svelte.config.js`, `kit.csp.directives['script-src']` and `['connect-src']`. Nuxt + nuxt-security: `nuxt.config.*`, `security.headers.contentSecurityPolicy['script-src']` and `['connect-src']`. Reference outputs: [nextjs-turborepo/expected-after-patch.ts](https://github.com/pbakaus/impeccable/blob/8dac6ae7e020c43ab10ce9b41939f6fd42627b96/tests/framework-fixtures/nextjs-turborepo/expected-after-patch.ts), [sveltekit-csp/expected-after-patch.js](https://github.com/pbakaus/impeccable/blob/8dac6ae7e020c43ab10ce9b41939f6fd42627b96/tests/framework-fixtures/sveltekit-csp/expected-after-patch.js). Idempotency: if `__impeccableLiveDev` already exists in the file, the patch is applied; just mark `cspChecked: true`.
+
+### append-string
+
+Two-point patch: declare a dev-only string, interpolate it into the CSP value at both directives (leading space so it concatenates cleanly; convert literals to template strings as part of the edit):
+
+```ts
+// Dev-only allowance so impeccable live mode can load.
+const __impeccableLiveDev =
+  process.env.NODE_ENV === "development" ? " http://localhost:8400" : "";
+```
+
+- `script-src 'self' 'unsafe-inline'` becomes `` `script-src 'self' 'unsafe-inline'${__impeccableLiveDev}` ``
+- `connect-src 'self'` becomes `` `connect-src 'self'${__impeccableLiveDev}` ``
+
+Per-framework: Next.js inline `headers()` in `next.config.*`; Nuxt `routeRules['/**'].headers['Content-Security-Policy']` in `nuxt.config.*`. Reference outputs: [nextjs-inline-csp/expected-after-patch.js](https://github.com/pbakaus/impeccable/blob/8dac6ae7e020c43ab10ce9b41939f6fd42627b96/tests/framework-fixtures/nextjs-inline-csp/expected-after-patch.js), [nuxt-csp/expected-after-patch.ts](https://github.com/pbakaus/impeccable/blob/8dac6ae7e020c43ab10ce9b41939f6fd42627b96/tests/framework-fixtures/nuxt-csp/expected-after-patch.ts).
+
+## Troubleshooting
+
+If the user said "no" to the CSP patch and later reports live not working: their dev CSP blocks `http://localhost:8400`. Delete `cspChecked` from `.impeccable/live/config.json` and re-run `impeccable live`; setup asks again.
+
+After setup, re-run `impeccable live`.

package/vendor/impeccable/bundle/blobs/074575671f24cf4298d06f0019f76e94f62e9a6ed205fce05b8e507341e64266

@@ -0,0 +1,111 @@
+# /impeccable hooks
+
+Manage the **design detector hook** for the current project.
+
+The hook runs the impeccable design detector on direct file edits to design-relevant files (`.tsx`, `.jsx`, `.html`, `.vue`, `.svelte`, `.astro`, `.css`, `.scss`, `.sass`, `.less`, `.ts`, `.js`). Claude Code, Codex, and GitHub Copilot use a post-tool-use hook and push a short system reminder into the agent's context after the edit; findings get a correction prompt, pending issues get a re-nudge, and clean UI-ish files get a short ack unless quiet mode is on (`hook.quiet` in config). Plain `.ts` and `.js` files are still scanned, but stay quiet unless the detector finds something. Cursor uses `preToolUse` to block bad proposed writes before they land and stays silent when it allows a clean write. Grok Build fires the same PostToolUse scan to mark touched files, then surfaces findings on Stop `additionalContext`. Do not expect a Grok per-edit reminder: Grok discards that stdout.
+
+The detector rules run in two tiers. The per-edit hook surfaces only the immediate tier: mechanical, unambiguous problems worth interrupting an edit for, such as broken images, overflowing or clipped content, contrast and legibility failures, gradient text, glow shadows, and design-system drift. Everything else (copy cadence, palette and typography taste, layout rhythm) is deferred to a deep pass on the `Stop` hook event, which runs the full rule set over every UI file touched in the session and surfaces the remaining findings once, deduplicated against what the per-edit pass already reported. A session with nothing left to report stops silently. Set `hook.perEditRules` to `"all"` in `.impeccable/config.json` to restore the full rule set on every edit. The Stop deep pass is wired for Claude Code, Codex, and Grok Build, which dispatch a native `Stop` hook event. Cursor does not get one (its stop hook is not consistently dispatched; the pre-write gate covers it), and GitHub Copilot's stop-style events do not feed context back to the model, so they keep the full detector per edit. Grok also fires an observe-only Stop with `reason: "shutdown"` after `end_turn`; skip that one, scan only `end_turn`.
+
+Every hook is a mechanical pass. The reflexes no scanner catches live in [craft-floor.md](craft-floor.md), which the skill loads before it edits UI, so they apply whether or not a hook is wired. A session with no automatic hook gets one `MANUAL_DETECTOR_REQUIRED` directive from `impeccable context` asking for a single detector run at the end.
+
+This command toggles the hook **per project** by editing `.impeccable/config.json` (the unified Impeccable config; hook runtime settings live under its `hook` key, and shared detector ignores live under `detector`). Per-developer overrides, including the install consent decision (`hook.consent`) the CLI records, live in the gitignored `.impeccable/config.local.json`. Set `hook.enabled: false` to turn the hook off, `hook.quiet: true` to silence the clean/pending acks, or `hook.auditLog` to a file path for an NDJSON log. The legacy `IMPECCABLE_HOOK_DISABLED`, `IMPECCABLE_HOOK_QUIET`, and `IMPECCABLE_HOOK_LOG` env vars are still honored and override these config values when set.
+
+Declare server-side template extensions under **`detector.extensions`** when the project uses Blade, Twig, ERB, or Handlebars files; the hook skips them otherwise because they sit outside the built-in extension list. One entry per extension, `{ "ext": ".blade.php", "engine": "html" }`. `engine` picks the analyzer (`html` for markup templates, `text` for JS/TS/CSS-like files) and defaults to `html`. Match against the end of the filename, so double extensions like `.blade.php` and `.html.erb` work. Config only adds extensions; the built-in list always applies.
+
+Manual `npx impeccable detect` scans use the same project filter config by default: `detector.ignoreRules`, `detector.ignoreFiles`, `detector.ignoreValues`, and `detector.designSystem.enabled`. `hook.enabled` only controls automatic hook execution, not manual CLI scans. Use `npx impeccable detect --no-config ...` for a raw detector run that ignores project config/context. Use `npx impeccable ignores ...` for direct CLI CRUD on the same detector ignores.
+
+Supported harnesses: Claude Code (`.claude/settings.local.json` in the project, which is gitignored so the hook stays machine-local; a hook you move into the shared `settings.json` is honored in place too), Codex (`.codex/hooks.json` in the project), Cursor (`.cursor/hooks.json` in the project), Grok Build (`.grok/hooks/impeccable.json` in the project; requires `/hooks-trust` or `--trust`), and GitHub Copilot (`.github/hooks/impeccable.json` in the project, a team-shared committed file that both the Copilot CLI and the cloud agent read). For the Copilot CLI, repo-level hooks fire once `.github/hooks/impeccable.json` is committed to the repository's default branch.
+
+On **Cursor**, `preToolUse` checks proposed Write/Edit/Shell write content and denies only when the real detector finds an issue. The denial message is visible to the agent as the tool error, so the agent can reconsider before the bad write lands.
+
+## Routing
+
+The first argument is the action. Defaults to `status`.
+
+| Action | What it does |
+|---|---|
+| `status` | Print current state, shared/local config paths, ignored rules / files / values, env override. |
+| `on` | Set `enabled: true` in `.impeccable/config.json`, record local hook consent as accepted, and install/repair provider hook manifests when the skill is installed. |
+| `off` | Set `enabled: false` in `.impeccable/config.json`. |
+| `ignore-rule <id>` | Append `<id>` to `detector.ignoreRules`; for `overused-font`, requires `--all-values`. Suppresses the rule across the whole project. |
+| `ignore-file <glob>` | Append `<glob>` to `detector.ignoreFiles`. Suppresses **every** rule for matching files. |
+| `ignore-value <id> <value> [--shared] [--reason "..."]` | Append a rule/value suppression to shared `.impeccable/config.json`. |
+| `ignore-value <id> <value> --local [--reason "..."]` | Append a private rule/value suppression to `.impeccable/config.local.json`. |
+| `ignore-value <id> "*" --file <glob> [--file <glob>...]` | Turn one rule off in matching files only, leaving it active everywhere else. Repeat `--file`, or use `--file=<glob>` / `--files=<glob>`. A bare `"*"` with no `--file` is refused: use `ignore-rule <id>` if you really mean project-wide. |
+| `reset` | Delete the project config, dedup cache, and Cursor pending queue, and remove the hook's entries from every provider manifest `on` installs, the committed Copilot file included (a team-shared `settings.json` that `on` never writes is never touched). |
+
+## Flow
+
+1. Resolve the action from the user's argument. If no action was given, default to `status`.
+2. Invoke the admin script and pass the user's output through verbatim:
+
+   ```bash
+   .kiro/skills/impeccable/scripts/impeccable hooks <action> [args...]
+   ```
+
+3. If `<action>` is `off`, follow up with a one-line note: "Done. New edits will not trigger the design hook in this project until you run `/impeccable hooks on`."
+4. If `<action>` is `on`, follow up with: "Done. The design hook will fire after the next Edit/Write on a UI file."
+5. If `<action>` is `ignore-value`, `ignore-file`, or `ignore-rule`, just print the script output. The default scope is shared `.impeccable/config.json`; add `--local` only when the user explicitly asks for a private exception.
+6. If `<action>` is `status`, just print the script output. Do not add commentary unless the user asked a follow-up question.
+
+## Triage findings
+
+The hook itself never writes ignore config; every exception goes through `impeccable hooks`. Triage each finding into one of three outcomes:
+
+- **Real design problem**: fix it. Never add an ignore to skip a fix or to push a blocked write through.
+- **Confident false positive or sanctioned exception**: persist the narrowest ignore yourself and disclose it in your reply. The bar is evidence you can name: an intentional demo or fixture, documentation of bad design, literal or domain-appropriate motion (a ball that bounces), or a choice the user already confirmed. Put that evidence in `--reason` as `"<who decided: evidence>"`; write "user confirmed" only when the user actually did.
+- **Unsure**: leave the finding standing and ask the user in one line. Ask once; a one-line question costs less than the hook re-firing on every later edit.
+
+Self-serve stops at `ignore-value`. `ignore-file` and `ignore-rule` silence too much to add on your own judgment; ask the user first.
+
+Prefer the narrowest exception:
+
+- If the finding line shows an `ignore-value <rule> <value>` pair, pass it to `impeccable hooks ignore-value` with your `--reason`. This writes shared `.impeccable/config.json` by default.
+- For value-specific findings such as `overused-font` and `bounce-easing`, use `ignore-value` for the specific value. Do not use `ignore-rule overused-font` for a specific font.
+- If the finding has no value-specific command, such as `side-tab`, scope that one rule to the file: `ignore-value <id> "*" --file <path>`. Run `npx impeccable detect <path>` first to see what actually fires there.
+- Reach for `ignore-file <path>` only when the whole file is out of scope for design review: a fixture, a generated artifact, a deliberate slop demo. It silences every rule for that file permanently, including rules that have not been written yet. A real UI surface with one noisy rule wants the file-scoped value ignore above.
+- Use `ignore-rule <id>` only when the user asks to suppress that whole rule across the project. For broad overused-font suppression, use `ignore-rule overused-font --all-values` only when the user asks to ignore overused fonts generally.
+- Prefer config ignores (the commands above) by default; they keep suppressions in one reviewable place. Reach for an inline comment only when the waiver must travel with a single file that leaves the repo (a generated/exported standalone document, an emailed HTML file). The supported marker is `impeccable-disable <rule>` (whole file) or `impeccable-disable-line` / `impeccable-disable-next-line` (one line), in any comment syntax, with an optional reason after `:` or `--`. The detector honors it by default; `--no-inline-ignores` or `--no-config` bypasses it.
+
+Example value-specific exception:
+
+```bash
+.kiro/skills/impeccable/scripts/impeccable hooks ignore-value overused-font Inter --shared --reason "User confirmed Inter is intentional"
+```
+
+Example self-served exception, with the evidence named:
+
+```bash
+.kiro/skills/impeccable/scripts/impeccable hooks ignore-value bounce-easing bounce-ball --shared --reason "Agent: literal ball-bounce animation, bounce easing is the subject"
+```
+
+Example whole-rule font exception:
+
+```bash
+.kiro/skills/impeccable/scripts/impeccable hooks ignore-rule overused-font --all-values --reason "User asked to ignore overused fonts generally"
+```
+
+Example one-rule-in-one-file exception, for a file that is still worth reviewing
+for everything else:
+
+```bash
+.kiro/skills/impeccable/scripts/impeccable hooks ignore-value design-system-font-size "*" --file "src/overlay/widget.js" --reason "Injected widget builds its own type scale; DESIGN.md's ramp describes the site"
+```
+
+Example whole-file exception, for a file that is out of scope entirely:
+
+```bash
+.kiro/skills/impeccable/scripts/impeccable hooks ignore-file "src/legacy/Card.tsx"
+```
+
+## Constraints
+
+- Never modify `.impeccable/config.json` or `.impeccable/config.local.json` by hand from this command. Always go through `impeccable hooks` so writes stay validated and the file shape stays consistent. One exception: `detector.extensions` has no admin action, so when the user asks to cover a template stack, edit that one field in `.impeccable/config.json` directly and leave the rest of the file untouched.
+- Do not edit the launcher or the binary behind `impeccable hook` and `impeccable hook-before-edit` from this flow. Those are skill plumbing.
+- Cursor can block a proposed write when the detector finds a real issue. Claude Code, Codex, and GitHub Copilot do not block the edit; they emit a post-edit reminder instead. Disabling stops both blocking and reminders.
+- The hook is bundled with the Impeccable skill and installed through project-local manifests: `.claude/settings.local.json`, `.codex/hooks.json`, `.cursor/hooks.json`, and `.github/hooks/impeccable.json`. On Codex, the user must approve the hook via `/hooks` the first time. On Cursor, confirm hooks are enabled under Settings -> Hooks. On GitHub Copilot, the CLI loads `.github/hooks/impeccable.json` once it is committed to the repository's default branch, and the cloud agent reads it from the repo directly.
+
+## Failure modes
+
+- If `.impeccable/config.json` or `.impeccable/config.local.json` is unreadable or malformed, the hook ignores that file and uses the remaining valid config/defaults. `impeccable hooks status` will show malformed files as ignored.
+- If the user asks to "disable the hook" globally, lead with `/impeccable hooks off` (persistent for this project; writes `hook.enabled: false` to config). The legacy `IMPECCABLE_HOOK_DISABLED=1` env var also works as a one-shot override that follows the shell.

package/vendor/impeccable/bundle/blobs/076a31941acbaa81013c8c511e146ed4138128eb5e9895dae3e9a27a25ac4f04

@@ -0,0 +1,13 @@
+{
+  "version": 1,
+  "hooks": {
+    "postToolUse": [
+      {
+        "type": "command",
+        "matcher": "edit|create|apply_patch",
+        "bash": "[ ! -f \"$(git rev-parse --show-toplevel)/.github/skills/impeccable/scripts/impeccable\" ] || \"$(git rev-parse --show-toplevel)/.github/skills/impeccable/scripts/impeccable\" hook",
+        "timeoutSec": 5
+      }
+    ]
+  }
+}

package/vendor/impeccable/bundle/blobs/08812a8618de7bd2f63a51298e9c2558031237e8efba280062ccb636101e25e1

@@ -0,0 +1,80 @@
+Typography carries information, hierarchy, and voice. Improve it inside the established visual world; do not replace the identity unless the user asked to.
+
+---
+
+## Visitor mode
+
+- **Persuade + Experience:** display type may carry the voice. Use decisive contrast and responsive scale when the composition benefits.
+- **Operate + Read:** stability, scanability, and measure come first. A single well-tuned family and fixed role scale are often right.
+- **Native:** follow [ios.md](ios.md) or [android.md](android.md), including platform scaling and accessibility behavior.
+
+If typography replacement would create a new identity, route through [new-work.md](new-work.md) and update DESIGN.md. Otherwise preserve confirmed families and improve their use.
+
+## Two isolated assessments
+
+When a sub-agent tool is available and permitted, run these independently; otherwise run them yourself in this order. Do not let detector findings anchor the design assessment.
+
+1. **Typographic assessment:** inspect representative pages and styles. Answer every question below with a file, selector, or computed value:
+   - **Authority and fit:** Which faces, weights, and roles are established? Do they fit the product and selected world, or are they unexamined defaults? Is every family necessary?
+   - **Hierarchy:** Can heading, body, label, metadata, and data roles be distinguished at a glance? Are adjacent sizes or weights too close to carry different jobs?
+   - **Scale and consistency:** Is there a deliberate role scale, or a collection of arbitrary values? Do repeated roles stay identical across screens and states?
+   - **Reading:** Does body copy stay within a comfortable 45–75 character measure? Are line height, paragraph rhythm, contrast, and tracking tuned to the actual face, width, language, and surface?
+   - **Stress:** What happens with long headings, localization expansion, zoom, narrow containers, missing weights, and font fallback?
+   - **Delivery:** Are only used assets loaded? Do fallback metrics, loading strategy, and variable-font settings avoid invisible text and disruptive reflow?
+2. **Mechanical scan:** run:
+
+```bash
+.kiro/skills/impeccable/scripts/impeccable detect --json --scope type [target files or dirs]
+```
+
+Also inspect dynamic or arbitrary font values the detector cannot interpret. Synthesize both assessments before editing, noting what each caught alone. A clean scan is a floor, not proof of good typography.
+
+## Set the system
+
+Before editing, state:
+
+- the roles the interface needs;
+- the intended contrast between those roles;
+- the reading measure and density;
+- which existing faces and weights are authoritative;
+- any performance, localization, or accessibility constraints.
+
+Use the fewest roles and families that make the hierarchy unmistakable. Combine size, weight, space, and tone deliberately instead of asking size alone to do all the work. Role names and tokens should describe purpose rather than values.
+
+## Apply
+
+- Keep body copy comfortably readable and zoomable. Use 1rem / 16px as the ordinary web body floor unless a dense role, platform convention, or user setting justifies otherwise.
+- Keep prose in the 45–75ch range. Tune line height inversely with measure: wider lines generally need more leading.
+- Compensate light text on dark surfaces on all three perceptual axes: slightly more line height, a touch more tracking, and one step more weight when the face needs it.
+- Tune line height to the face, width, language, and contrast, not a universal ratio.
+- Keep repeated roles consistent across screens and states.
+- Use numeric, tabular, code, and label features when their content benefits.
+- Load only used font assets and weights. Provide metric-compatible fallbacks and avoid blocking text.
+- Let marketing display type respond to available space when useful; keep dense product and reading surfaces spatially predictable.
+- Preserve browser zoom, user font settings, Dynamic Type, and platform text scaling.
+- Use paragraph spacing or first-line indentation as the primary paragraph rhythm; combining both usually double-marks the boundary.
+
+Do not make type decorative at the expense of comprehension, or introduce a second family without a clear role it alone can perform.
+
+## Verify
+
+- Primary, secondary, body, and metadata roles are recognizable without reading the copy.
+- Long text remains comfortable across relevant widths and languages.
+- The typography belongs to the product and its established world.
+- Loading does not create disruptive reflow or invisible text.
+- Zoom, text scaling, focus, contrast, and reduced viewport paths remain usable.
+- The final mechanical scan has no unexplained findings.
+
+Answer each item with rendered or source evidence, then rerun the scan. Do not substitute a bare “yes” for verification.
+
+When the hierarchy holds, hand off to `/impeccable polish`.
+
+## Live-mode signature params
+
+Every variant declares a coarse `scale` parameter and authors its type ramp against `var(--p-scale, 1)`.
+
+```json
+{"id":"scale","kind":"range","min":0.85,"max":1.3,"step":0.05,"default":1,"label":"Scale"}
+```
+
+Add at most one pairing or weight parameter when it represents a real system choice. Follow [live.md](live.md)'s parameter contract.