@tushar-br/editing-pack 1.0.195 → 1.0.197

package/staging_area/Blender/blender.shared/usd/hdSt/resources/shaders/mesh.glslfx

@@ -1,1519 +0,0 @@
--- glslfx version 0.1
-
-//
-// Copyright 2016 Pixar
-//
-// Licensed under the terms set forth in the LICENSE.txt file available at
-// https://openusd.org/license.
-//
-
---- This is what an import might look like.
---- #import $TOOLS/hdSt/shaders/mesh.glslfx
-
-#import $TOOLS/hdSt/shaders/instancing.glslfx
-#import $TOOLS/hdSt/shaders/meshFaceCull.glslfx
-#import $TOOLS/hdSt/shaders/meshNormal.glslfx
-#import $TOOLS/hdSt/shaders/meshWire.glslfx
-#import $TOOLS/hdSt/shaders/terminals.glslfx
-#import $TOOLS/hdSt/shaders/edgeId.glslfx
-#import $TOOLS/hdSt/shaders/pointId.glslfx
-#import $TOOLS/hdSt/shaders/pointDisk.glslfx
-#import $TOOLS/hdSt/shaders/visibility.glslfx
-
---- --------------------------------------------------------------------------
--- layout Mesh.Vertex
-
-[
-    ["out block", "VertexData", "outData",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.Vertex
-
-// Fwd declare methods defined in pointId.glslfx, that are used below.
-FORWARD_DECL(int GetPointId());
-FORWARD_DECL(float GetPointRasterSize(int));
-FORWARD_DECL(void ProcessPointId(int));
-
-void main(void)
-{
-    ProcessPrimvarsIn();
-
-    MAT4 transform    = ApplyInstanceTransform(HdGet_transform());
-    vec4 point        = vec4(HdGet_points().xyz, 1);
-    outData.Peye = vec4(GetWorldToViewMatrix() * transform * point);
-
-    outData.Neye = GetNormal(vec3(0), 0); // normalized
-
-    int pointId = GetPointId();
-    gl_PointSize = ApplyPointSizeBias(GetPointRasterSize(pointId));
-    ProcessPointId(pointId);
-
-    gl_Position = vec4(GetProjectionMatrix() * outData.Peye);
-    ApplyClipPlanes(outData.Peye);
-}
-
---- --------------------------------------------------------------------------
--- layout Mesh.PostTessVertex.Triangle
-
-[
-    ["out block", "VertexData", "outData",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.PostTessVertex.Triangle
-
-vec4 GetPatchCoord(int index)
-{
-    vec2 uv[3];
-    uv[0] = vec2(0, 0); // (0, 0, 1);
-    uv[1] = vec2(1, 0); // (1, 0, 0);
-    uv[2] = vec2(0, 1); // (0, 1, 0);
-
-    ivec3 patchParam = GetPatchParam();
-    return InterpolatePatchCoordTriangle(uv[index], patchParam);
-}
-
-vec2 GetPatchCoordLocalST()
-{
-    return gl_TessCoord.yz;
-}
-
-// Fwd declare methods defined in pointId.glslfx, that are used below.
-FORWARD_DECL(int GetPointId());
-FORWARD_DECL(float GetPointRasterSize(int));
-FORWARD_DECL(void ProcessPointId(int));
-
-void main(void)
-{
-    MAT4 transform = ApplyInstanceTransform(HdGet_transform());
-
-    int pointId = GetPointId();
-    gl_PointSize = ApplyPointSizeBias(GetPointRasterSize(pointId));
-    ProcessPointId(pointId);
-
-    vec4 point0 = GetWorldToViewMatrix() * transform * vec4(points[0],1.0);
-    vec4 point1 = GetWorldToViewMatrix() * transform * vec4(points[1],1.0);
-    vec4 point2 = GetWorldToViewMatrix() * transform * vec4(points[2],1.0);
-
-    // Get the indata Neye if provided.
-    bool isFlipped = IsFlipped();
-    vec3 Neye0 = GetNormal(vec3(0),0);
-    vec3 Neye1 = GetNormal(vec3(0),1);
-    vec3 Neye2 = GetNormal(vec3(0),2);
-
-    Neye0 = GetTriGeometryNormal(Neye0, point0, point1, point2, isFlipped);
-    Neye1 = GetTriGeometryNormal(Neye1, point0, point1, point2, isFlipped);
-    Neye2 = GetTriGeometryNormal(Neye2, point0, point1, point2, isFlipped);
-
-    point0 = DisplacementTerminal(0, point0, Neye0, GetPatchCoord(0));
-    point1 = DisplacementTerminal(1, point1, Neye1, GetPatchCoord(1));
-    point2 = DisplacementTerminal(2, point2, Neye2, GetPatchCoord(2));
-
-    vec2 coord = gl_TessCoord.xy;
-    vec4 basis = vec4(coord.x, coord.y, 1.0f-coord.x-coord.y, 0.0f);
-
-    outData.Peye = InterpolatePrimvar(point0, point1, point2, point0, basis);
-    outData.Neye = InterpolatePrimvar(Neye0, Neye1, Neye2, Neye0, basis);
-
-    gl_Position = vec4(GetProjectionMatrix() * outData.Peye);
-    ApplyClipPlanes(outData.Peye);
-
-    ProcessPrimvarsOut(basis, 0, 1, 2, 0);
-}
-
---- --------------------------------------------------------------------------
--- layout Mesh.PostTessVertex.Quad
-
-[
-    ["out block", "VertexData", "outData",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.PostTessVertex.Quad
-
-vec4 GetPatchCoord(int index)
-{
-    vec2 uv[4];
-    uv[0] = vec2(0, 0);
-    uv[1] = vec2(1, 0);
-    uv[2] = vec2(1, 1);
-    uv[3] = vec2(0, 1);
-
-    ivec3 patchParam = GetPatchParam();
-    return InterpolatePatchCoord(uv[index], patchParam);
-}
-
-vec2 GetPatchCoordLocalST()
-{
-    return gl_TessCoord;
-}
-
-// Fwd declare methods defined in pointId.glslfx, that are used below.
-FORWARD_DECL(int GetPointId());
-FORWARD_DECL(float GetPointRasterSize(int));
-FORWARD_DECL(void ProcessPointId(int));
-
-void main(void)
-{
-    MAT4 transform = ApplyInstanceTransform(HdGet_transform());
-
-    int pointId = GetPointId();
-    gl_PointSize = ApplyPointSizeBias(GetPointRasterSize(pointId));
-    ProcessPointId(pointId);
-
-    vec4 point0 = GetWorldToViewMatrix() * transform * vec4(points[0],1.0);
-    vec4 point1 = GetWorldToViewMatrix() * transform * vec4(points[1],1.0);
-    vec4 point2 = GetWorldToViewMatrix() * transform * vec4(points[2],1.0);
-    vec4 point3 = GetWorldToViewMatrix() * transform * vec4(points[3],1.0);
-
-    // Get the indata Neye if provided.
-    bool isFlipped = IsFlipped();
-    vec3 Neye0 = GetNormal(vec3(0),0);
-    vec3 Neye1 = GetNormal(vec3(0),1);
-    vec3 Neye2 = GetNormal(vec3(0),2);
-    vec3 Neye3 = GetNormal(vec3(0),3);
-
-    Neye0 = GetQuadGeometryNormal(
-                Neye0, point0, point1, point2, point3, isFlipped);
-    Neye1 = GetQuadGeometryNormal(
-                Neye1, point0, point1, point2, point3, isFlipped);
-    Neye2 = GetQuadGeometryNormal(
-                Neye2, point0, point1, point2, point3, isFlipped);
-    Neye3 = GetQuadGeometryNormal(
-                Neye3, point0, point1, point2, point3, isFlipped);
-
-    point0 = DisplacementTerminal(0, point0, Neye0, GetPatchCoord(0));
-    point1 = DisplacementTerminal(1, point1, Neye1, GetPatchCoord(1));
-    point2 = DisplacementTerminal(2, point2, Neye2, GetPatchCoord(2));
-    point3 = DisplacementTerminal(3, point3, Neye3, GetPatchCoord(3));
-
-    vec3 coord = gl_TessCoord.xy;
-    vec4 basis = vec4((1.0-coord.x) * (1.0-coord.y), coord.x * (1.0-coord.y),
-                      (1.0-coord.x) * coord.y, coord.x * coord.y);
-
-    outData.Peye = InterpolatePrimvar(point0, point1, point3, point2, basis);
-    outData.Neye = InterpolatePrimvar(Neye0, Neye1, Neye3, Neye2, basis);
-
-    gl_Position = vec4(GetProjectionMatrix() * outData.Peye);
-    ApplyClipPlanes(outData.Peye);
-
-    ProcessPrimvarsOut(basis, 0, 1, 3, 2);
-}
-
---- --------------------------------------------------------------------------
--- layout Mesh.PostTessVertex.TriQuad
-
-[
-    ["out block", "VertexData", "outData",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.PostTessVertex.TriQuad
-
-vec4 GetPatchCoord(int index)
-{
-    vec2 uv[6];
-    uv[0] = vec2(0, 0);
-    uv[1] = vec2(1, 0);
-    uv[2] = vec2(1, 1);
-    uv[3] = vec2(1, 1);
-    uv[4] = vec2(0, 1);
-    uv[5] = vec2(0, 0);
-
-    ivec3 patchParam = GetPatchParam();
-    return InterpolatePatchCoord(uv[index], patchParam);
-}
-
-vec2 GetPatchCoordLocalST()
-{
-    return gl_TessCoord;
-}
-
-// Fwd declare methods defined in pointId.glslfx, that are used below.
-FORWARD_DECL(int GetPointId());
-FORWARD_DECL(float GetPointRasterSize(int));
-FORWARD_DECL(void ProcessPointId(int));
-
-void main(void)
-{
-    MAT4 transform = ApplyInstanceTransform(HdGet_transform());
-
-    int pointId = GetPointId();
-    gl_PointSize = ApplyPointSizeBias(GetPointRasterSize(pointId));
-    ProcessPointId(pointId);
-
-    vec4 point0 = GetWorldToViewMatrix() * transform * vec4(points[0],1.0);
-    vec4 point1 = GetWorldToViewMatrix() * transform * vec4(points[1],1.0);
-    vec4 point2 = GetWorldToViewMatrix() * transform * vec4(points[2],1.0);
-    vec4 point4 = GetWorldToViewMatrix() * transform * vec4(points[4],1.0);
-
-    //Get the indata Neye if provided.
-    bool isFlipped = IsFlipped();
-    vec3 Neye0 = GetNormal(vec3(0),0);
-    vec3 Neye1 = GetNormal(vec3(0),1);
-    vec3 Neye2 = GetNormal(vec3(0),2);
-    vec3 Neye4 = GetNormal(vec3(0),4);
-
-    Neye0 = GetQuadGeometryNormal(Neye0,
-                point0, point1, point2, point4, isFlipped);
-    Neye1 = GetQuadGeometryNormal(Neye1,
-                point0, point1, point2, point4, isFlipped);
-    Neye2 = GetQuadGeometryNormal(Neye2,
-                point0, point1, point2, point4, isFlipped);
-    Neye4 = GetQuadGeometryNormal(Neye4,
-                point0, point1, point2, point4, isFlipped);
-
-    point0 = DisplacementTerminal(0, point0, Neye0, GetPatchCoord(0));
-    point1 = DisplacementTerminal(1, point1, Neye1, GetPatchCoord(1));
-    point2 = DisplacementTerminal(2, point2, Neye2, GetPatchCoord(2));
-    point4 = DisplacementTerminal(4, point4, Neye4, GetPatchCoord(4));
-
-    vec2 coord = gl_TessCoord.xy;
-    vec4 basis = vec4((1.0-coord.x) * (1.0-coord.y), coord.x * (1.0-coord.y),
-                      (1.0-coord.x) * coord.y, coord.x * coord.y);
-
-    outData.Peye = InterpolatePrimvar(point0, point1, point4, point2, basis);
-    outData.Neye = InterpolatePrimvar(Neye0, Neye1, Neye4, Neye2, basis);
-
-    gl_Position = vec4(GetProjectionMatrix() * outData.Peye);
-    ApplyClipPlanes(outData.Peye);
-
-    ProcessPrimvarsOut(basis, 0, 1, 4, 2);
-}
-
---- --------------------------------------------------------------------------
--- glsl Mesh.TessControl.PatchCommon
-
-void
-ClampTessLevels(inout vec4 tessOuterLo, inout vec4 tessOuterHi)
-{
-    // Clamp outer tess levels to a minimum of 2 so that we always
-    // sample along each edge and in the middle of transition patches.
-    const vec4 minOuterTessLevel = vec4(2.0);
-
-    // Values in the tessOuterHi segments which are zero should remain zero.
-    const bvec4 maskOuterHi = notEqual(tessOuterHi, vec4(0.0));
-
-    tessOuterLo = max(minOuterTessLevel, tessOuterLo);
-    tessOuterHi = max(minOuterTessLevel * vec4(maskOuterHi), tessOuterHi);
-}
-
---- --------------------------------------------------------------------------
--- layout Mesh.TessControl.BSplineQuad
-
-[
-    ["out", "HD_NUM_PATCH_EVAL_VERTS"],
-    ["out", "vec4", "tessOuterLo", "patch"],
-    ["out", "vec4", "tessOuterHi", "patch"],
-    ["in block array", "VertexData", "inpt", "gl_MaxPatchVertices",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ],
-    ["out block array", "VertexDataTess", "outpt", "HD_NUM_PATCH_EVAL_VERTS",
-        ["OsdPerPatchVertexBezier", "v"]
-    ]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.TessControl.BSplineQuad
-
-void main(void)
-{
-    vec3 cv[HD_NUM_PATCH_VERTS];
-    for (int i = 0; i < HD_NUM_PATCH_VERTS; ++i) {
-        cv[i] = inpt[i].Peye.xyz;
-    }
-
-    ivec3 patchParam = GetPatchParam();
-
-    OsdComputePerPatchVertexBSpline(patchParam, gl_InvocationID, cv,
-                                    outpt[gl_InvocationID].v);
-
-    // Wait for all basis conversion to be finished
-    barrier();
-
-    if (gl_InvocationID == 0) {
-        vec4 tessLevelOuter = vec4(0);
-        vec2 tessLevelInner = vec2(0);
-
-        // Gather bezier control points to compute limit surface tess levels
-        OsdPerPatchVertexBezier cpBezier[HD_NUM_PATCH_EVAL_VERTS];
-        for (int i = 0; i < HD_NUM_PATCH_EVAL_VERTS; ++i) {
-            cpBezier[i] = outpt[i].v;
-        }
-        OsdEvalPatchBezierTessLevels(cpBezier, patchParam,
-                                     tessOuterLo, tessOuterHi);
-        ClampTessLevels(tessOuterLo, tessOuterHi);
-
-        OsdComputeTessLevels(tessOuterLo, tessOuterHi,
-                             tessLevelOuter, tessLevelInner);
-
-        gl_TessLevelOuter[0] = tessLevelOuter[0];
-        gl_TessLevelOuter[1] = tessLevelOuter[1];
-        gl_TessLevelOuter[2] = tessLevelOuter[2];
-        gl_TessLevelOuter[3] = tessLevelOuter[3];
-
-        gl_TessLevelInner[0] = tessLevelInner[0];
-        gl_TessLevelInner[1] = tessLevelInner[1];
-    }
-
-    ProcessPrimvarsOut();
-}
-
---- --------------------------------------------------------------------------
--- layout Mesh.TessEval.BezierQuad
-
-# XXX: due to NVIDIA shader compiler bug (filed as 1687344)
-# we can't put patchCoord into interface block.
-[
-    ["in", "quads"],
-    ["in", "vec4", "tessOuterLo", "patch"],
-    ["in", "vec4", "tessOuterHi", "patch"],
-    ["in block array", "VertexDataTess", "inpt", "gl_MaxPatchVertices",
-        ["OsdPerPatchVertexBezier", "v"]
-    ],
-    ["out block", "VertexData", "outData",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ],
-    ["out", "vec4", "tesPatchCoord"],
-    ["out", "vec2", "tesTessCoord"]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.TessEval.BezierQuad
-
-void main(void)
-{
-    OsdPerPatchVertexBezier cv[16];
-    for (int i = 0; i < 16; ++i) {
-        cv[i] = inpt[i].v;
-    }
-    vec2 UV = OsdGetTessParameterization(gl_TessCoord.xy,
-                                         tessOuterLo,
-                                         tessOuterHi);
-
-    vec3 P = vec3(0), dPu = vec3(0), dPv = vec3(0);
-    vec3 N = vec3(0), dNu = vec3(0), dNv = vec3(0);
-
-    ivec3 patchParam = inpt[0].v.patchParam;
-    OsdEvalPatchBezier(patchParam, UV, cv, P, dPu, dPv, N, dNu, dNv);
-
-    outData.Peye = vec4(P, 1);
-    outData.Neye = N; // normalized
-
-    tesPatchCoord = OsdInterpolatePatchCoord(UV, patchParam);
-    tesTessCoord = UV;
-
-    // Bilinear basis
-    vec4 basis = vec4(
-        (1.0-UV.x) * (1.0-UV.y), UV.x * (1.0-UV.y),
-        (1.0-UV.x) * UV.y, UV.x * UV.y );
-
-    ProcessPrimvarsOut(basis, 5, 6, 9, 10, UV);
-}
-
---- --------------------------------------------------------------------------
--- layout Mesh.TessControl.BoxSplineTriangle
-
-[
-    ["out", "HD_NUM_PATCH_EVAL_VERTS"],
-    ["out", "vec4", "tessOuterLo", "patch"],
-    ["out", "vec4", "tessOuterHi", "patch"],
-    ["in block array", "VertexData", "inpt", "gl_MaxPatchVertices",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ],
-    ["out block array", "VertexDataTess", "outpt", "HD_NUM_PATCH_EVAL_VERTS",
-        ["OsdPerPatchVertexBezier", "v"]
-    ]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.TessControl.BoxSplineTriangle
-
-void main(void)
-{
-    vec3 cv[HD_NUM_PATCH_VERTS];
-    for (int i = 0; i < HD_NUM_PATCH_VERTS; ++i) {
-        cv[i] = inpt[i].Peye.xyz;
-    }
-
-    ivec3 patchParam = GetPatchParam();
-
-    OsdComputePerPatchVertexBoxSplineTriangle(patchParam, gl_InvocationID, cv,
-                                              outpt[gl_InvocationID].v);
-
-    // Wait for all basis conversion to be finished
-    barrier();
-
-    if (gl_InvocationID == 0) {
-        vec4 tessLevelOuter = vec4(0);
-        vec2 tessLevelInner = vec2(0);
-
-        // Gather bezier control points to compute limit surface tess levels
-        vec3 cpBezier[HD_NUM_PATCH_EVAL_VERTS];
-        for (int i = 0; i < HD_NUM_PATCH_EVAL_VERTS; ++i) {
-            cpBezier[i] = outpt[i].v.P;
-        }
-        OsdEvalPatchBezierTriangleTessLevels(cpBezier, patchParam,
-                                            tessOuterLo, tessOuterHi);
-        ClampTessLevels(tessOuterLo, tessOuterHi);
-
-        OsdComputeTessLevelsTriangle(tessOuterLo, tessOuterHi,
-                                     tessLevelOuter, tessLevelInner);
-
-        gl_TessLevelOuter[0] = tessLevelOuter[0];
-        gl_TessLevelOuter[1] = tessLevelOuter[1];
-        gl_TessLevelOuter[2] = tessLevelOuter[2];
-
-        gl_TessLevelInner[0] = tessLevelInner[0];
-    }
-
-    ProcessPrimvarsOut();
-}
-
---- --------------------------------------------------------------------------
--- layout Mesh.TessEval.BezierTriangle
-
-# XXX: due to NVIDIA shader compiler bug (filed as 1687344)
-# we can't put patchCoord into interface block.
-[
-    ["in", "triangles"],
-    ["in", "vec4", "tessOuterLo", "patch"],
-    ["in", "vec4", "tessOuterHi", "patch"],
-    ["in block array", "VertexDataTess", "inpt", "gl_MaxPatchVertices",
-        ["OsdPerPatchVertexBezier", "v"]
-    ],
-    ["out block", "VertexData", "outData",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ],
-    ["out", "vec4", "tesPatchCoord"],
-    ["out", "vec2", "tesTessCoord"]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.TessEval.BezierTriangle
-
-void main(void)
-{
-    OsdPerPatchVertexBezier cv[15];
-    for (int i = 0; i < 15; ++i) {
-        cv[i] = inpt[i].v;
-    }
-    vec2 UV = OsdGetTessParameterizationTriangle(gl_TessCoord.xyz,
-                                                 tessOuterLo,
-                                                 tessOuterHi);
-
-    vec3 P = vec3(0), dPu = vec3(0), dPv = vec3(0);
-    vec3 N = vec3(0), dNu = vec3(0), dNv = vec3(0);
-
-    ivec3 patchParam = inpt[0].v.patchParam;
-    OsdEvalPatchBezierTriangle(patchParam, UV, cv, P, dPu, dPv, N, dNu, dNv);
-
-    outData.Peye = vec4(P, 1);
-    outData.Neye = N; // normalized
-
-    tesPatchCoord = OsdInterpolatePatchCoordTriangle(UV, patchParam);
-    tesTessCoord = UV;
-
-    // Barycentric basis
-    vec4 basis = vec4(
-        (1.0f-UV.x-UV.y), UV.x, UV.y, 0.0f);
-
-    ProcessPrimvarsOut(basis, 4, 5, 8, 0, UV);
-}
-
---- --------------------------------------------------------------------------
--- glsl Mesh.PostTessControl.PatchCommon
-
-void
-ClampTessLevels(thread vec4 &tessOuterLo, thread vec4 &tessOuterHi)
-{
-    // Clamp outer tess levels to a minimum of 2 so that we always
-    // sample along each edge and in the middle of transition patches.
-    const vec4 minOuterTessLevel = vec4(2.0);
-
-    // Values in the tessOuterHi segments which are zero should remain zero.
-    const bvec4 maskOuterHi = notEqual(tessOuterHi, vec4(0.0));
-
-    tessOuterLo = max(minOuterTessLevel, tessOuterLo);
-    tessOuterHi = max(minOuterTessLevel * vec4(maskOuterHi), tessOuterHi);
-}
-
---- --------------------------------------------------------------------------
--- glsl Mesh.PostTessControl.BSplineQuad
-
-vec3 GetPosAtUv(vec2 uv, OsdPatchParam param, thread vec3 *cv)
-{
-    float wP[HD_NUM_PATCH_VERTS];
-    float wDs[HD_NUM_PATCH_VERTS];
-    float wDt[HD_NUM_PATCH_VERTS];
-    float wDss[HD_NUM_PATCH_VERTS];
-    float wDst[HD_NUM_PATCH_VERTS];
-    float wDtt[HD_NUM_PATCH_VERTS];
-    OsdEvaluatePatchBasisNormalized(OSD_PATCH_DESCRIPTOR_REGULAR,
-        param, uv.x, uv.y,
-        &(wP[0]), &(wDs[0]), &(wDt[0]), &(wDss[0]), &(wDst[0]), &(wDtt[0]));
-
-    vec3 pos = vec3(0.0, 0.0, 0.0);
-    for (int i = 0; i < 16; ++i) {
-        pos += cv[i] * wP[i];
-    }
-    return pos;
-}
-
-vec4 GetPatchCoord(int index)
-{
-    vec2 uv[4];
-    uv[0] = vec2(0, 0);
-    uv[1] = vec2(1, 0);
-    uv[2] = vec2(1, 1);
-    uv[3] = vec2(0, 1);
-
-    ivec3 patchParam = GetPatchParam();
-    return OsdInterpolatePatchCoord(uv[index], patchParam);
-}
-
-void main(void)
-{
-    MAT4 transform =
-        GetWorldToViewMatrix() * ApplyInstanceTransform(HdGet_transform());
-
-    ivec3 patchParam = GetPatchParam();
-    OsdPatchParam osdParam = OsdPatchParamInit(patchParam.x, patchParam.y, 0);
-
-    const vec2 corner0Uv = vec2(0.0, 0.0);
-    const vec2 corner1Uv = vec2(1.0, 0.0);
-    const vec2 corner2Uv = vec2(1.0, 1.0);
-    const vec2 corner3Uv = vec2(0.0, 1.0);
-
-    vec3 corners[4];
-    corners[0] = GetPosAtUv(corner0Uv, osdParam, &(points[0]));
-    corners[1] = GetPosAtUv(corner1Uv, osdParam, &(points[0]));
-    corners[2] = GetPosAtUv(corner2Uv, osdParam, &(points[0]));
-    corners[3] = GetPosAtUv(corner3Uv, osdParam, &(points[0]));
-
-    int transitionMask = OsdGetPatchTransitionMask(patchParam);
-    vec3 midPoints[4];
-    midPoints[0] = ((transitionMask & 8) == 0)
-        ? float3(0)
-        : GetPosAtUv(float2(0.0, 0.5), osdParam, &(points[0]));
-    midPoints[1] = ((transitionMask & 1) == 0)
-        ? float3(0)
-        : GetPosAtUv(float2(0.5, 0.0), osdParam, &(points[0]));
-    midPoints[2] = ((transitionMask & 2) == 0)
-        ? float3(0)
-        : GetPosAtUv(float2(1.0, 0.5), osdParam, &(points[0]));
-    midPoints[3] = ((transitionMask & 4) == 0)
-        ? float3(0)
-        : GetPosAtUv(float2(0.5, 1.0), osdParam, &(points[0]));
-
-    vec4 tessLevelOuter = vec4(0);
-    vec2 tessLevelInner = vec2(0);
-    vec4 tessOuterLo = vec4(0);
-    vec4 tessOuterHi = vec4(0);
-
-    // Gather bezier control points to compute limit surface tess levels
-    Osd_GetTessLevelsFromPatchBoundaries4(
-        GetTessLevel(), GetProjectionMatrix(), transform,
-        corners, midPoints, patchParam, tessOuterLo, tessOuterHi);
-    ClampTessLevels(tessOuterLo, tessOuterHi);
-
-    OsdComputeTessLevels(tessOuterLo, tessOuterHi,
-                         tessLevelOuter, tessLevelInner);
-
-    device half *tessAsHalf = (device half *)tessFactors + patch_id * 6;
-
-    tessAsHalf[0] = half(tessLevelOuter[0]);
-    tessAsHalf[1] = half(tessLevelOuter[1]);
-    tessAsHalf[2] = half(tessLevelOuter[2]);
-    tessAsHalf[3] = half(tessLevelOuter[3]);
-
-    tessAsHalf[4] = half(tessLevelInner[0]);
-    tessAsHalf[5] = half(tessLevelInner[1]);
-}
-
---- --------------------------------------------------------------------------
--- layout Mesh.PostTessVertex.BSplineQuad
-
-[
-    ["in", "equal_spacing"],
-    ["out block", "VertexData", "outData",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ],
-    ["out", "vec4", "tesPatchCoord"],
-    ["out", "vec2", "tesTessCoord"]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.PostTessVertex.BSplineQuad
-
-vec2 GetPatchTessUV()
-{
-    const ivec3 patchParam = GetPatchParam();
-
-    const int refinementLevel = OsdGetPatchRefinementLevel(patchParam);
-    const float tessLevel = min(GetTessLevel(),
-        (float)OSD_MAX_TESS_LEVEL) / exp2((float)refinementLevel - 1);
-
-    vec4 tessOuterLo(0), tessOuterHi(0);
-    OsdGetTessLevelsUniform(tessLevel, patchParam, tessOuterLo, tessOuterHi);
-
-    return OsdGetTessParameterization(gl_TessCoord.xy,
-                                      tessOuterLo,
-                                      tessOuterHi);
-}
-
-vec4 GetPatchCoord(int index)
-{
-    return OsdInterpolatePatchCoord(GetPatchTessUV(), GetPatchParam());
-}
-
-void main(void)
-{
-    MAT4 transform = ApplyInstanceTransform(HdGet_transform());
-
-    int pointId = GetPointId();
-    gl_PointSize = ApplyPointSizeBias(GetPointRasterSize(pointId));
-    ProcessPointId(pointId);
-
-    const ivec3 patchParam = GetPatchParam();
-    const vec2 UV = GetPatchTessUV();
-
-    float wP[HD_NUM_PATCH_VERTS];
-    float wDs[HD_NUM_PATCH_VERTS];
-    float wDt[HD_NUM_PATCH_VERTS];
-    float wDss[HD_NUM_PATCH_VERTS];
-    float wDst[HD_NUM_PATCH_VERTS];
-    float wDtt[HD_NUM_PATCH_VERTS];
-    OsdPatchParam osdParam = OsdPatchParamInit(patchParam.x, patchParam.y, 0);
-    OsdEvaluatePatchBasisNormalized(OSD_PATCH_DESCRIPTOR_REGULAR,
-        osdParam, UV.x, UV.y,
-        &(wP[0]), &(wDs[0]), &(wDt[0]), &(wDss[0]), &(wDst[0]), &(wDtt[0]));
-
-    vec3 P = vec3(0.0);
-    vec3 N = vec3(0.0);
-
-    vec3 pDs = vec3(0.0);
-    vec3 pDt = vec3(0.0);
-
-    for (int i = 0; i < 16; ++i) {
-          P +=  points[i] * wP[i];
-        pDs +=  points[i] * wDs[i];
-        pDt +=  points[i] * wDt[i];
-    }
-
-    MAT4 transformInv = ApplyInstanceTransformInverse(HdGet_transformInverse());
-    N = normalize(cross(pDs,pDt));
-    N = vec4(transpose(transformInv * GetWorldToViewInverseMatrix()) *
-                  vec4(N,0)).xyz;
-
-    if (length(N) > 0.0) {
-        N = normalize(N);
-    }
-
-    tesPatchCoord = OsdInterpolatePatchCoord(UV, patchParam);
-    tesTessCoord = UV;
-
-    P = (GetWorldToViewMatrix() * transform * vec4(P,1.0)).xyz;
-    P = (DisplacementTerminal(0, vec4(P,1.0), N, tesPatchCoord)).xyz;
-
-    outData.Peye = vec4(P, 1);
-    outData.Neye = N; // normalized
-
-    gl_Position = vec4(GetProjectionMatrix() * outData.Peye);
-    ApplyClipPlanes(outData.Peye);
-
-    // Bilinear basis
-    vec4 basis = vec4(
-            (1.0-UV.x) * (1.0-UV.y), UV.x * (1.0-UV.y),
-            (1.0-UV.x) * UV.y, UV.x * UV.y );
-
-    ProcessPrimvarsOut(basis, 5, 6, 9, 10, UV);
-}
-
---- --------------------------------------------------------------------------
--- glsl Mesh.PostTessControl.BoxSplineTriangle
-
-vec3 GetPosAtUv(vec2 uv, OsdPatchParam param, thread vec3 *cv)
-{
-    float wP[HD_NUM_PATCH_VERTS];
-    float wDs[HD_NUM_PATCH_VERTS];
-    float wDt[HD_NUM_PATCH_VERTS];
-    float wDss[HD_NUM_PATCH_VERTS];
-    float wDst[HD_NUM_PATCH_VERTS];
-    float wDtt[HD_NUM_PATCH_VERTS];
-    OsdEvaluatePatchBasisNormalized(OSD_PATCH_DESCRIPTOR_LOOP,
-        param, uv.x, uv.y,
-        &(wP[0]), &(wDs[0]), &(wDt[0]), &(wDss[0]), &(wDst[0]), &(wDtt[0]));
-
-    vec3 pos = vec3(0.0, 0.0, 0.0);
-    for (int i = 0; i < 12; ++i) {
-        pos += cv[i] * wP[i];
-    }
-    return pos;
-}
-
-vec4 GetPatchCoord(int index)
-{
-    vec2 uv[3];
-    uv[0] = vec2(0, 0); // (0, 0, 1);
-    uv[1] = vec2(1, 0); // (1, 0, 0);
-    uv[2] = vec2(0, 1); // (0, 1, 0);
-
-    ivec3 patchParam = GetPatchParam();
-    return OsdInterpolatePatchCoordTriangle(uv[index], patchParam);
-}
-
-void main(void)
-{
-    MAT4 transform =
-        GetWorldToViewMatrix() * ApplyInstanceTransform(HdGet_transform());
-
-    ivec3 patchParam = GetPatchParam();
-    OsdPatchParam osdParam = OsdPatchParamInit(patchParam.x, patchParam.y, 0);
-
-    const vec3 corner0Uv = vec3(0.0, 0.0, 1.0);
-    const vec3 corner1Uv = vec3(1.0, 0.0, 0.0);
-    const vec3 corner2Uv = vec3(0.0, 1.0, 0.0);
-
-    vec3 corners[3];
-    corners[0] = GetPosAtUv(corner0Uv.xy, osdParam, &(points[0]));
-    corners[1] = GetPosAtUv(corner1Uv.xy, osdParam, &(points[0]));
-    corners[2] = GetPosAtUv(corner2Uv.xy, osdParam, &(points[0]));
-
-    int transitionMask = OsdGetPatchTransitionMask(patchParam);
-    vec3 midPoints[3];
-    midPoints[0] = ((transitionMask & 4) == 0)
-        ? float3(0)
-        : GetPosAtUv(((corner2Uv + corner0Uv)/2.0).xy, osdParam, &(points[0]));
-    midPoints[1] = ((transitionMask & 1) == 0)
-        ? float3(0)
-        : GetPosAtUv(((corner0Uv + corner1Uv)/2.0).xy, osdParam, &(points[0]));
-    midPoints[2] = ((transitionMask & 2) == 0)
-        ? float3(0)
-        : GetPosAtUv(((corner1Uv + corner2Uv)/2.0).xy, osdParam, &(points[0]));
-
-    vec4 tessLevelOuter = vec4(0);
-    vec2 tessLevelInner = vec2(0);
-    vec4 tessOuterLo = vec4(0);
-    vec4 tessOuterHi = vec4(0);
-    Osd_GetTessLevelsFromPatchBoundaries3(
-        GetTessLevel(), GetProjectionMatrix(), transform,
-        corners, midPoints, patchParam, tessOuterLo, tessOuterHi);
-    ClampTessLevels(tessOuterLo, tessOuterHi);
-
-    OsdComputeTessLevelsTriangle(tessOuterLo, tessOuterHi,
-                         tessLevelOuter, tessLevelInner);
-
-    device half *tessAsHalf = (device half *)tessFactors + patch_id * 4;
-
-    tessAsHalf[0] = half(tessLevelOuter[0]);
-    tessAsHalf[1] = half(tessLevelOuter[1]);
-    tessAsHalf[2] = half(tessLevelOuter[2]);
-
-    tessAsHalf[3] = half(tessLevelInner[0]);
-}
-
---- --------------------------------------------------------------------------
--- layout Mesh.PostTessVertex.BoxSplineTriangle
-
-[
-    ["in", "equal_spacing"],
-    ["out block", "VertexData", "outData",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ],
-    ["out", "vec4", "tesPatchCoord"],
-    ["out", "vec2", "tesTessCoord"]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.PostTessVertex.BoxSplineTriangle
-
-vec2 GetPatchTessUV()
-{
-    const ivec3 patchParam = GetPatchParam();
-
-    const int refinementLevel = OsdGetPatchRefinementLevel(patchParam);
-    const float tessLevel = min(GetTessLevel(),
-        (float)OSD_MAX_TESS_LEVEL) / exp2((float)refinementLevel - 1);
-
-    vec4 tessOuterLo(0), tessOuterHi(0);
-    OsdGetTessLevelsUniform(tessLevel, patchParam, tessOuterLo, tessOuterHi);
-
-    return OsdGetTessParameterizationTriangle(gl_TessCoord.xyz,
-                                              tessOuterLo,
-                                              tessOuterHi);
-}
-
-vec4 GetPatchCoord(int index)
-{
-    return OsdInterpolatePatchCoordTriangle(GetPatchTessUV(), GetPatchParam());
-}
-
-void main(void)
-{
-    MAT4 transform = ApplyInstanceTransform(HdGet_transform());
-
-    int pointId = GetPointId();
-    gl_PointSize = ApplyPointSizeBias(GetPointRasterSize(pointId));
-    ProcessPointId(pointId);
-
-    const ivec3 patchParam = GetPatchParam();
-    const vec2 UV = GetPatchTessUV();
-
-    float wP[HD_NUM_PATCH_VERTS];
-    float wDs[HD_NUM_PATCH_VERTS];
-    float wDt[HD_NUM_PATCH_VERTS];
-    float wDss[HD_NUM_PATCH_VERTS];
-    float wDst[HD_NUM_PATCH_VERTS];
-    float wDtt[HD_NUM_PATCH_VERTS];
-    OsdPatchParam osdParam = OsdPatchParamInit(patchParam.x, patchParam.y, 0);
-    OsdEvaluatePatchBasisNormalized(OSD_PATCH_DESCRIPTOR_LOOP,
-        osdParam, UV.x, UV.y,
-        &(wP[0]), &(wDs[0]), &(wDt[0]), &(wDss[0]), &(wDst[0]), &(wDtt[0]));
-
-    vec3 P = vec3(0.0);
-    vec3 N = vec3(0.0);
-
-    vec3 pDs = vec3(0.0);
-    vec3 pDt = vec3(0.0);
-
-    for (int i = 0; i < 12; ++i) {
-          P +=  points[i] * wP[i];
-        pDs +=  points[i] * wDs[i];
-        pDt +=  points[i] * wDt[i];
-    }
-
-    MAT4 transformInv = ApplyInstanceTransformInverse(HdGet_transformInverse());
-    N = normalize(cross(pDs,pDt));
-    N = vec4(transpose(transformInv * GetWorldToViewInverseMatrix()) *
-                  vec4(N,0)).xyz;
-
-    if (length(N) > 0.0) {
-        N = normalize(N);
-    }
-
-    tesPatchCoord = OsdInterpolatePatchCoordTriangle(UV, patchParam);
-    tesTessCoord = UV;
-
-    P = (GetWorldToViewMatrix() * transform * vec4(P,1.0)).xyz;
-    P = (DisplacementTerminal(0, vec4(P,1.0), N, tesPatchCoord)).xyz;
-
-    outData.Peye = vec4(P, 1);
-    outData.Neye = N; // normalized
-
-    gl_Position =  vec4(GetProjectionMatrix() * outData.Peye);
-    ApplyClipPlanes(outData.Peye);
-
-    // Barycentric basis
-    vec4 basis = vec4(
-            (1.0f-UV.x-UV.y), UV.x, UV.y, 0.0f);
-
-    ProcessPrimvarsOut(basis, 4, 5, 8, 0, UV);
-}
-
---- --------------------------------------------------------------------------
--- layout Mesh.Geometry.TriangleTess
-
-[
-    ["in", "triangles"],
-    ["out", "triangle_strip"],
-    ["out", "3"],
-    ["in block array", "VertexData", "inData", "3",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ],
-    ["in array", "vec4", "tesPatchCoord", "3"],
-    ["in array", "vec2", "tesTessCoord", "3"],
-    ["out block", "VertexData", "outData",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ],
-    ["out", "vec4", "gsPatchCoord"]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.Geometry.TriangleTess
-
-vec4 GetPatchCoord(int index)
-{
-    return tesPatchCoord[index];
-}
-
-void emit(int index, vec4 Peye, vec3 Neye)
-{
-    outData.Peye = Peye;
-    outData.Neye = Neye;
-    gsPatchCoord = GetPatchCoord(index);
-    gl_Position = vec4(GetProjectionMatrix() * outData.Peye);
-    ApplyClipPlanes(outData.Peye);
-
-    ProcessPrimvarsOut(index, tesTessCoord[index]);
-
-    EmitVertex();
-}
-
-void main(void)
-{
-    gl_PrimitiveID = gl_PrimitiveIDIn;
-
-    bool isFlipped = IsFlipped(); // consider handedness AND negative-scale
-
-    vec3 Neye0 = isFlipped ? -inData[0].Neye : inData[0].Neye;
-    Neye0 = GetNormal(Neye0, 0, tesTessCoord[0]);
-    Neye0 = GetTriGeometryNormal(Neye0, inData[0].Peye, inData[1].Peye,
-        inData[2].Peye, isFlipped);
-    vec3 Neye1 = isFlipped ? -inData[1].Neye : inData[1].Neye;
-    Neye1 = GetNormal(Neye1, 0, tesTessCoord[1]);
-    Neye1 = GetTriGeometryNormal(Neye1, inData[0].Peye, inData[1].Peye,
-        inData[2].Peye, isFlipped);
-    vec3 Neye2 = isFlipped ? -inData[2].Neye : inData[2].Neye;
-    Neye2 = GetNormal(Neye2, 0, tesTessCoord[2]);
-    Neye2 = GetTriGeometryNormal(Neye2, inData[0].Peye, inData[1].Peye,
-        inData[2].Peye, isFlipped);
-
-    vec4 Peye0 = DisplacementTerminal(
-        0, inData[0].Peye, Neye0, GetPatchCoord(0));
-    vec4 Peye1 = DisplacementTerminal(
-        1, inData[1].Peye, Neye1, GetPatchCoord(1));
-    vec4 Peye2 = DisplacementTerminal(
-        2, inData[2].Peye, Neye2, GetPatchCoord(2));
-
-    // triangle 0: vertices (0,1,2)
-    emit(0, Peye0, Neye0);
-    emit(1, Peye1, Neye1);
-    emit(2, Peye2, Neye2);
-
-    EndPrimitive();
-}
-
---- --------------------------------------------------------------------------
--- glsl Mesh.TessEval.VaryingInterpolation
-
-float InterpolatePrimvar(float inPv0, float inPv1, float inPv2, float inPv3, 
-                         vec4 basis, vec2 uv)
-{   
-    return basis[0] * inPv0 + 
-           basis[1] * inPv1 + 
-           basis[2] * inPv2 + 
-           basis[3] * inPv3;
-}
-
-vec2 InterpolatePrimvar(vec2 inPv0, vec2 inPv1, vec2 inPv2, vec2 inPv3, 
-                        vec4 basis, vec2 uv)
-{   
-    return basis[0] * inPv0 + 
-           basis[1] * inPv1 + 
-           basis[2] * inPv2 + 
-           basis[3] * inPv3;
-}
-
-vec3 InterpolatePrimvar(vec3 inPv0, vec3 inPv1, vec3 inPv2, vec3 inPv3, 
-                        vec4 basis, vec2 uv)
-{   
-    return basis[0] * inPv0 + 
-           basis[1] * inPv1 + 
-           basis[2] * inPv2 + 
-           basis[3] * inPv3;
-}
-
-vec4 InterpolatePrimvar(vec4 inPv0, vec4 inPv1, vec4 inPv2, vec4 inPv3, 
-                        vec4 basis, vec2 uv)
-{   
-    return basis[0] * inPv0 + 
-           basis[1] * inPv1 + 
-           basis[2] * inPv2 + 
-           basis[3] * inPv3;
-}
-
---- --------------------------------------------------------------------------
--- layout Mesh.Geometry.Triangle
-
-[
-    ["in", "triangles"],
-    ["out", "triangle_strip"],
-    ["out", "3"],
-    ["in block array", "VertexData", "inData", "3",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ],
-    ["out block", "VertexData", "outData",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ],
-    ["out", "vec4", "gsPatchCoord"]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.Geometry.Triangle
-
-vec4 GetPatchCoord(int index)
-{
-    vec2 uv[3];
-    uv[0] = vec2(0, 0); // (0, 0, 1);
-    uv[1] = vec2(1, 0); // (1, 0, 0);
-    uv[2] = vec2(0, 1); // (0, 1, 0);
-
-    ivec3 patchParam = GetPatchParam();
-    return InterpolatePatchCoordTriangle(uv[index], patchParam);
-}
-
-void emit(int index, vec4 Peye, vec3 Neye)
-{
-    outData.Peye = Peye;
-    outData.Neye = Neye;
-
-    gsPatchCoord = GetPatchCoord(index);
-
-    gl_Position = vec4(GetProjectionMatrix() * outData.Peye);
-    ApplyClipPlanes(outData.Peye);
-
-    ProcessPrimvarsOut(index);
-
-    EmitVertex();
-}
-
-void main(void)
-{
-    gl_PrimitiveID = gl_PrimitiveIDIn;
-
-    bool isFlipped = IsFlipped(); // consider handedness AND negative-scale
-
-    vec3 Neye0 = GetNormal(inData[0].Neye, 0);
-    Neye0 = GetTriGeometryNormal(Neye0, inData[0].Peye, inData[1].Peye,
-        inData[2].Peye, isFlipped);
-    vec3 Neye1 = GetNormal(inData[1].Neye, 1);
-    Neye1 = GetTriGeometryNormal(Neye1, inData[0].Peye, inData[1].Peye,
-        inData[2].Peye, isFlipped);
-    vec3 Neye2 = GetNormal(inData[2].Neye, 2);
-    Neye2 = GetTriGeometryNormal(Neye2, inData[0].Peye, inData[1].Peye,
-        inData[2].Peye, isFlipped);
-
-    vec4 Peye0 = DisplacementTerminal(
-        0, inData[0].Peye, Neye0, GetPatchCoord(0));
-    vec4 Peye1 = DisplacementTerminal(
-        1, inData[1].Peye, Neye1, GetPatchCoord(1));
-    vec4 Peye2 = DisplacementTerminal(
-        2, inData[2].Peye, Neye2, GetPatchCoord(2));
-
-    // triangle 0: vertices (0,1,2)
-    emit(0, Peye0, Neye0);
-    emit(1, Peye1, Neye1);
-    emit(2, Peye2, Neye2);
-
-    EndPrimitive();
-}
-
---- --------------------------------------------------------------------------
--- layout Mesh.Geometry.TriQuad
-
-[
-    ["in", "triangles"],
-    ["out", "triangle_strip"],
-    ["out", "3"],
-    ["in block array", "VertexData", "inData", "3",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ],
-    ["out block", "VertexData", "outData",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.Geometry.TriQuad
-
-vec4 GetPatchCoord(int index)
-{
-    vec2 uv[4];
-    uv[0] = vec2(0, 0);
-    uv[1] = vec2(1, 0);
-    uv[2] = vec2(1, 1);
-    uv[3] = vec2(0, 1);
-
-    ivec3 patchParam = GetPatchParam();
-    return InterpolatePatchCoord(uv[index], patchParam);
-}
-
-void emit(int index, vec4 Peye, vec3 Neye)
-{
-    outData.Peye = Peye;
-    outData.Neye = Neye;
-
-    gl_Position = vec4(GetProjectionMatrix() * outData.Peye);
-    ApplyClipPlanes(outData.Peye);
-
-    ProcessPrimvarsOut(index);
-
-    EmitVertex();
-}
-
-void main(void)
-{
-    gl_PrimitiveID = gl_PrimitiveIDIn;
-
-    bool isFlipped = IsFlipped(); // consider handedness AND negative-scale
-
-    vec3 Neye0 = GetNormal(inData[0].Neye, 0);
-    Neye0 = GetTriGeometryNormal(Neye0, inData[0].Peye, inData[1].Peye,
-        inData[2].Peye, isFlipped);
-    vec3 Neye1 = GetNormal(inData[1].Neye, 1);
-    Neye1 = GetTriGeometryNormal(Neye1, inData[0].Peye, inData[1].Peye,
-        inData[2].Peye, isFlipped);
-    vec3 Neye2 = GetNormal(inData[2].Neye, 2);
-    Neye2 = GetTriGeometryNormal(Neye2, inData[0].Peye, inData[1].Peye,
-        inData[2].Peye, isFlipped);
-
-    vec4 Peye0 = DisplacementTerminal(
-        0, inData[0].Peye, Neye0, GetPatchCoord(0));
-    vec4 Peye1 = DisplacementTerminal(
-        1, inData[1].Peye, Neye1, GetPatchCoord(1));
-    vec4 Peye2 = DisplacementTerminal(
-        2, inData[2].Peye, Neye2, GetPatchCoord(2));
-
-    // triangle 0: vertices (0,1,2)
-    emit(0, Peye0, Neye0);
-    emit(1, Peye1, Neye1);
-    emit(2, Peye2, Neye2);
-    EndPrimitive();
-}
-
---- --------------------------------------------------------------------------
--- layout Mesh.Geometry.Quad
-
-[
-    ["in", "lines_adjacency"],
-    ["out", "triangle_strip"],
-    ["out", "6"],
-    ["in block array", "VertexData", "inData", "4",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ],
-    ["out block", "VertexData", "outData",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ],
-    ["out", "vec4", "gsPatchCoord"]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.Geometry.Quad
-
-vec4 GetPatchCoord(int index)
-{
-    vec2 uv[4];
-    uv[0] = vec2(0, 0);
-    uv[1] = vec2(1, 0);
-    uv[2] = vec2(1, 1);
-    uv[3] = vec2(0, 1);
-
-    ivec3 patchParam = GetPatchParam();
-    return InterpolatePatchCoord(uv[index], patchParam);
-}
-
-void emit(int index, vec4 Peye, vec3 Neye)
-{
-    outData.Peye = Peye;
-    outData.Neye = Neye;
-
-    gsPatchCoord = GetPatchCoord(index);
-
-    gl_Position = vec4(GetProjectionMatrix() * outData.Peye);
-    ApplyClipPlanes(outData.Peye);
-
-    ProcessPrimvarsOut(index);
-
-    EmitVertex();
-}
-
-void main(void)
-{
-    gl_PrimitiveID = gl_PrimitiveIDIn;
-
-    bool isFlipped = IsFlipped(); // consider handedness AND negative-scale
-
-    vec3 Neye0 = GetNormal(inData[0].Neye, 0);
-    Neye0 = GetQuadGeometryNormal(Neye0, inData[0].Peye, inData[1].Peye,
-        inData[2].Peye, inData[3].Peye, isFlipped);
-    vec3 Neye1 = GetNormal(inData[1].Neye, 1);
-    Neye1 = GetQuadGeometryNormal(Neye1, inData[0].Peye, inData[1].Peye,
-        inData[2].Peye, inData[3].Peye, isFlipped);
-    vec3 Neye2 = GetNormal(inData[2].Neye, 2);
-    Neye2 = GetQuadGeometryNormal(Neye2, inData[0].Peye, inData[1].Peye,
-        inData[2].Peye, inData[3].Peye, isFlipped);
-    vec3 Neye3 = GetNormal(inData[3].Neye, 3);
-    Neye3 = GetQuadGeometryNormal(Neye3, inData[0].Peye, inData[1].Peye,
-        inData[2].Peye, inData[3].Peye, isFlipped);
-
-    vec4 Peye0 = DisplacementTerminal(
-        0, inData[0].Peye, Neye0, GetPatchCoord(0));
-    vec4 Peye1 = DisplacementTerminal(
-        1, inData[1].Peye, Neye1, GetPatchCoord(1));
-    vec4 Peye2 = DisplacementTerminal(
-        2, inData[2].Peye, Neye2, GetPatchCoord(2));
-    vec4 Peye3 = DisplacementTerminal(
-        3, inData[3].Peye, Neye3, GetPatchCoord(3));
-
-    // Generate triangles (0,1,2) and (2,3,0)
-    //  3---2
-    //  |  .|
-    //  | . |
-    //  |.  |
-    //  0---1
-    // The indices post-quadrangulation/subdivision follow the convention:
-    // 0   -> original (hull) vertex
-    // 1,3 -> edge vertices
-    // 2   -> center vertex
-    //
-    // By having index 2 in both the triangles, we ensure the pre-quadrangulated
-    // face's normal (at the center) is part of the rasterizer interpolation,
-    // which matters when we use smooth/limit normals.
-    // In the case of flat normals, we use the vertex positions, so it doesn't
-    // matter.
-
-    // triangle 0: vertices (0,1,2)
-    emit(0, Peye0, Neye0);
-    emit(1, Peye1, Neye1);
-    emit(2, Peye2, Neye2);
-    EndPrimitive();
-
-    // triangle 1: vertices (2,3,0)
-    gl_PrimitiveID = gl_PrimitiveIDIn;
-    emit(2, Peye2, Neye2);
-    emit(3, Peye3, Neye3);
-    emit(0, Peye0, Neye0);
-    EndPrimitive();
-}
-
---- --------------------------------------------------------------------------
--- layout Mesh.Fragment.PatchCoord
-
-[
-    ["in", "vec4", "gsPatchCoord"]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.Fragment.PatchCoord
-
-vec4 GetInterpolatedPatchCoord()
-{
-    return gsPatchCoord;
-}
-
---- --------------------------------------------------------------------------
--- glsl Mesh.Fragment.PatchCoord.NoGS
-
-vec4 GetInterpolatedPatchCoord()
-{
-    return vec4(0);
-}
-
---- --------------------------------------------------------------------------
--- layout Mesh.Fragment.PatchCoord.Tess
-
-[
-    ["in", "vec4", "tesPatchCoord"]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.Fragment.PatchCoord.Tess
-
-vec4 GetInterpolatedPatchCoord()
-{
-    return tesPatchCoord;
-}
-
---- --------------------------------------------------------------------------
--- glsl Mesh.Fragment.PatchCoord.Triangle
-
-vec2 GetPatchCoordLocalST()
-{
-    return GetBarycentricCoord().yz;
-}
-
-vec4 GetInterpolatedPatchCoord()
-{
-    return InterpolatePatchCoordTriangle(
-                        GetPatchCoordLocalST(), GetPatchParam());
-}
-
---- --------------------------------------------------------------------------
--- glsl Mesh.Fragment.PatchCoord.Quad
-
-vec2 GetPatchCoordLocalST()
-{
-    return GetBarycentricCoord().yz;
-}
-
-vec4 GetInterpolatedPatchCoord()
-{
-    return InterpolatePatchCoord(GetPatchCoordLocalST(), GetPatchParam());
-}
-
---- --------------------------------------------------------------------------
--- glsl Mesh.Fragment.PatchCoord.TriQuad
-
-vec2 GetPatchCoordLocalST()
-{
-    vec3 barycentric = GetBarycentricCoord();
-    if (GetTriQuadID() == 0) {
-        vec2 uv[3] = { vec2(0,0), vec2(1,0), vec2(1,1) };
-        return uv[0]*barycentric.x + uv[1]*barycentric.y + uv[2]*barycentric.z;
-    } else {
-        vec2 uv[3] = { vec2(1,1), vec2(0,1), vec2(0,0) };
-        return uv[0]*barycentric.x + uv[1]*barycentric.y + uv[2]*barycentric.z;
-    }
-}
-
-vec4 GetInterpolatedPatchCoord()
-{
-    return InterpolatePatchCoord(GetPatchCoordLocalST(), GetPatchParam());
-}
-
---- --------------------------------------------------------------------------
--- glsl Mesh.Fragment.PatchCoord.TrianglePTVS
-
-vec2 GetPatchCoordLocalST()
-{
-    return GetTessCoordTriangle().yz;
-}
-
-vec4 GetInterpolatedPatchCoord()
-{
-    return InterpolatePatchCoordTriangle(
-                        GetPatchCoordLocalST(), GetPatchParam());
-}
-
---- --------------------------------------------------------------------------
--- glsl Mesh.Fragment.PatchCoord.QuadPTVS
-
-vec2 GetPatchCoordLocalST()
-{
-    return GetTessCoordTriangle().yz;
-}
-
-vec4 GetInterpolatedPatchCoord()
-{
-    return InterpolatePatchCoord(GetPatchCoordLocalST(), GetPatchParam());
-}
-
---- --------------------------------------------------------------------------
--- glsl Mesh.Fragment.PatchCoord.TriQuadPTVS
-
-vec2 GetPatchCoordLocalST()
-{
-    return GetTessCoord().xy;
-}
-
-vec4 GetInterpolatedPatchCoord()
-{
-    return InterpolatePatchCoord(GetPatchCoordLocalST(), GetPatchParam());
-}
-
---- --------------------------------------------------------------------------
--- layout Mesh.Fragment
-
-[
-    ["in block", "VertexData", "inData",
-        ["vec4", "Peye"],
-        ["vec3", "Neye"]
-    ]
-]
-
---- --------------------------------------------------------------------------
--- glsl Mesh.Fragment
-
-#ifndef HD_HAS_ptexFaceOffset
-#define HD_HAS_ptexFaceOffset
-int HdGet_ptexFaceOffset()
-{
-    return 0;
-}
-#endif
-
-vec4 GetPatchCoord(int localIndex)
-{
-    vec4 patchCoord = GetInterpolatedPatchCoord();
-    return vec4(patchCoord.xyz, patchCoord.w + HdGet_ptexFaceOffset());
-}
-
-vec4 GetPatchCoord()
-{
-    return GetPatchCoord(0);
-}
-
-vec3 ComputeScreenSpacePeye()
-{
-    return inData.Peye.xyz / inData.Peye.w;
-}
-
-vec3 ComputeScreenSpaceNeye()
-{
-    vec3 Peye = ComputeScreenSpacePeye();
-    vec3 Neye = normalize(cross(dFdx(Peye), dFdy(Peye)));
-    return (gl_FrontFacing ? Neye : -Neye);
-}
-
-void main(void)
-{
-    ApplyDiskSampleMask();
-
-    bool isFlipped = IsFlipped();
-
-    DiscardBasedOnShading(gl_FrontFacing, isFlipped);
-
-    DiscardBasedOnTopologicalVisibility();
-
-    vec4 color = vec4(0.5, 0.5, 0.5, 1);
-#ifdef HD_HAS_displayColor
-    color.rgb = HdGet_displayColor().rgb;
-#endif
-#ifdef HD_HAS_displayOpacity
-    color.a = HdGet_displayOpacity();
-#endif
-
-    vec3 Peye = ComputeScreenSpacePeye();
-
-    vec3 Neye = inData.Neye;
-    // Normalize Neye after rasterizer interpolation.
-    if (length(Neye) > 0.0) {
-        Neye = normalize(Neye);
-    }
-    // Give the shader key a chance to override the normal.
-    Neye = GetNormal(Neye, 0);
-    // Orient the normal for shading.
-    Neye = GetShadingNormal(Neye, isFlipped);
-
-    vec4 patchCoord = GetPatchCoord();
-    color = ShadingTerminal(vec4(Peye, 1), Neye, color, patchCoord);
-
-    color = ApplyEdgeColor(color, patchCoord);
-
-#ifdef HD_MATERIAL_TAG_MASKED   
-    if (ShouldDiscardByAlpha(color)) {
-        discard;
-        return;
-    }
-#endif
-
-    RenderOutput(vec4(Peye, 1), Neye, color, patchCoord);
-}