@tushar-br/editing-pack 1.0.195 → 1.0.197

package/staging_area/Blender/blender.shared/usd/usdMtlx/resources/libraries/mdl/materialx/pbrlib_1_7.mdl

@@ -1,265 +0,0 @@
-/*
- * Copyright (c) 2020, NVIDIA CORPORATION. All rights reserved.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-// MDL implementation of all types and nodes of
-//     MaterialX Physically-Based Shading Nodes
-//     Document v1.37 REV2, July 16, 2019 (Revised October 17, 2019)
-//     see www.materialx.org 
-// in
-//     NVIDIA Material Definition Language 1.7
-//     Language Specification
-//     Document version 1.7.2, January 17, 2022
-//     www.nvidia.com/mdl
-
-mdl 1.7;
-
-// Changes since MDL 1.6
-// - Support for unbounded_mix to implement add_bsdf, add_edf, and add_vdf
-// - Support for df::sheen_bsdf with a custom base BSDF
-// - Support for df::directional_factor on EDFs to implement generalized_schlick_edf
-// - Support for emission on VDFs
-
-import ::anno::*;
-import ::df::*;
-import ::math::*;
-import ::state::*;
-
-// forward all unchanged definitions from the previous version
-export using .::pbrlib_1_6 import mx_scatter_mode;
-export using .::pbrlib_1_6 import mx_sheen_mode;
-export using .::pbrlib_1_6 import mx_map_scatter_mode;
-export using .::pbrlib_1_6 import mx_oren_nayar_diffuse_bsdf;
-export using .::pbrlib_1_6 import mx_burley_diffuse_bsdf;
-export using .::pbrlib_1_6 import mx_translucent_bsdf;
-export using .::pbrlib_1_6 import mx_dielectric_bsdf;
-export using .::pbrlib_1_6 import mx_conductor_bsdf;
-export using .::pbrlib_1_6 import mx_generalized_schlick_bsdf;
-export using .::pbrlib_1_6 import mx_subsurface_bsdf;
-export using .::pbrlib_1_6 import mx_thin_film_bsdf;
-export using .::pbrlib_1_6 import mx_chiang_hair_bsdf;
-export using .::pbrlib_1_6 import mx_uniform_edf;
-export using .::pbrlib_1_6 import mx_conical_edf;
-export using .::pbrlib_1_6 import mx_measured_edf;
-export using .::pbrlib_1_6 import mx_absorption_vdf;
-export using .::pbrlib_1_6 import mx_anisotropic_vdf;
-export using .::pbrlib_1_6 import mx_surface;
-export using .::pbrlib_1_6 import mx_light;
-export using .::pbrlib_1_6 import mx_displacement_float;
-export using .::pbrlib_1_6 import mx_displacement_vector3;
-export using .::pbrlib_1_6 import volume_mix_return;
-export using .::pbrlib_1_6 import volume_mix;
-export using .::pbrlib_1_6 import mx_mix_bsdf;
-export using .::pbrlib_1_6 import mx_mix_vdf;
-export using .::pbrlib_1_6 import mx_multiply_bsdf_color3;
-export using .::pbrlib_1_6 import mx_multiply_bsdf_float;
-export using .::pbrlib_1_6 import mx_multiply_edf_color3;
-export using .::pbrlib_1_6 import mx_multiply_edf_float;
-export using .::pbrlib_1_6 import mx_multiply_vdf_color3;
-export using .::pbrlib_1_6 import mx_multiply_vdf_float;
-export using .::pbrlib_1_6 import mx_roughness_anisotropy;
-export using .::pbrlib_1_6 import mx_roughness_dual;
-export using .::pbrlib_1_6 import mx_blackbody;
-export using .::pbrlib_1_6 import mx_artistic_ior__result ;
-export using .::pbrlib_1_6 import mx_artistic_ior;
-export using .::pbrlib_1_6 import mx_deon_hair_absorption_from_melanin;
-export using .::pbrlib_1_6 import mx_chiang_hair_absorption_from_color;
-export using .::pbrlib_1_6 import mx_chiang_hair_roughness__result;
-export using .::pbrlib_1_6 import mx_chiang_hair_roughness;
-
-
-
-// To match with OSL, the sheen weight is scaled with average color as approximation of albedo.
-// OSL uses the layer operator which mixes based on albedo.
-export material mx_sheen_bsdf(
-    float  mxp_weight    = 1.0,
-    color  mxp_color     = color(1.0),
-    float  mxp_roughness = 0.2,
-    float3 mxp_normal    = state::normal(),
-    uniform mx_sheen_mode mxp_mode = mx_sheen_mode_conty_kulla [[ anno::unused() ]],
-    material mxp_base = material(
-                            surface: material_surface(
-                                scattering: df::diffuse_reflection_bsdf(
-                                ))) [[ anno::usage( "materialx:bsdf") ]]
-) [[ 
-    anno::usage( "materialx:bsdf") 
-]]
-= material(
-    surface: material_surface( 
-        // using the mix seems to fit OSL best, at least in the test cases
-        scattering: df::weighted_layer(
-            weight:  math::average(mxp_color) * mxp_weight,
-            layer: df::sheen_bsdf(
-                roughness: mxp_roughness,
-                tint: mxp_color,
-                multiscatter_tint: color(1.0),
-                multiscatter: mxp_base.surface.scattering
-            ),
-            base: mxp_base.surface.scattering,
-            normal: mxp_normal)),
-    // we need to carry volume properties along for SSS
-    ior:    mxp_base.ior,
-    volume: mxp_base.volume
-);
-
-
-// NOTE: Adding two BSDFs is not supported in MDL, the generator would best
-//       analyze the context for mixing weights and replace the add with a mix.
-//       The provided implementation just mixes the BSDFs with equal weight.
-export material mx_add_bsdf(
-    material mxp_in1 = material() [[ anno::usage( "materialx:bsdf") ]],
-    material mxp_in2 = material() [[ anno::usage( "materialx:bsdf") ]]
-) [[ 
-    anno::usage( "materialx:bsdf") 
-]]
-= let {
-    volume_mix_return v = volume_mix(
-        mxp_in1.volume.scattering_coefficient, 1.0f,
-        mxp_in2.volume.scattering_coefficient, 1.0f);
-} in material(
-    surface: material_surface( 
-        scattering: df::unbounded_mix(
-            df::bsdf_component[](
-                df::bsdf_component( 1.0, mxp_in1.surface.scattering), 
-                df::bsdf_component( 1.0, mxp_in2.surface.scattering)
-            )
-        )
-    ),
-    // we need to carry volume properties along for SSS
-    volume: material_volume(
-        scattering: df::unbounded_mix( 
-            df::vdf_component[]( 
-                df::vdf_component( v.mix_weight1, mxp_in1.volume.scattering), 
-                df::vdf_component( 1.0 - v.mix_weight1, mxp_in2.volume.scattering))
-        ),
-        absorption_coefficient: mxp_in1.volume.absorption_coefficient + 
-                                mxp_in2.volume.absorption_coefficient,
-        scattering_coefficient: v.scattering_coefficient
-    )
-);
-
-// NOTE: Adding two EDFs is not supported in MDL, the generator would best
-//       analyze the context for mixing weights and replace the add with a mix.
-//       The provided implementation just mixes the EDFs with equal weight
-//       and adds the intensities.
-export material mx_add_edf(
-    material mxp_in1 = material() [[ anno::usage( "materialx:edf") ]],
-    material mxp_in2 = material() [[ anno::usage( "materialx:edf") ]]
-) [[ 
-    anno::usage( "materialx:edf") 
-]]
-= material(
-    surface: material_surface( 
-        emission: material_emission(
-            emission: df::unbounded_mix( 
-            df::edf_component[]( 
-                df::edf_component( 1.0, mxp_in1.surface.emission.emission), 
-                df::edf_component( 1.0, mxp_in2.surface.emission.emission))
-            ),
-            intensity: mxp_in1.surface.emission.intensity + mxp_in2.surface.emission.intensity
-        )
-    )
-);
-
-export material mx_mix_edf(
-    material mxp_fg = material() [[ anno::usage( "materialx:edf") ]],
-    material mxp_bg = material() [[ anno::usage( "materialx:edf") ]],
-    float mxp_mix = 0.0
-) [[ 
-    anno::usage( "materialx:edf") 
-]]
-= let {
-    float mix = math::saturate(mxp_mix);
-} in material(
-    surface: material_surface( 
-        emission: material_emission(
-            emission: df::unbounded_mix(
-            df::edf_component[]( 
-                df::edf_component( mix, mxp_fg.surface.emission.emission), 
-                df::edf_component( 1.0 - mix, mxp_bg.surface.emission.emission))
-            ),
-            intensity: mix * mxp_fg.surface.emission.intensity +
-                       (1.0 - mix) * mxp_bg.surface.emission.intensity
-        )
-    )
-);
-
-// NOTE: Adding two VDFs is not supported in MDL, the generator would best
-//       analyze the context for mixing weights and replace the add with a mix.
-//       The provided implementation just mixes the VDFs with equal weight.
-export material mx_add_vdf(
-    material mxp_in1 = material() [[ anno::usage( "materialx:vdf") ]],
-    material mxp_in2 = material() [[ anno::usage( "materialx:vdf") ]]
-) [[ 
-    anno::usage( "materialx:vdf") 
-]]
-= let {
-    volume_mix_return v = volume_mix(
-        mxp_in1.volume.scattering_coefficient, 1.0f,
-        mxp_in2.volume.scattering_coefficient, 1.0f);
-} in material(
-    // assuming mixing the IOR is the best we can do here
-    ior:    0.5 * mxp_in1.ior + 0.5 * mxp_in2.ior,
-    volume: material_volume(
-        scattering: df::unbounded_mix( 
-            df::vdf_component[]( 
-                df::vdf_component( v.mix_weight1, mxp_in1.volume.scattering), 
-                df::vdf_component( 1.0 - v.mix_weight1, mxp_in2.volume.scattering))
-        ),
-        absorption_coefficient: mxp_in1.volume.absorption_coefficient + 
-                                mxp_in2.volume.absorption_coefficient,
-        scattering_coefficient: v.scattering_coefficient
-    )
-);
-
-export material mx_generalized_schlick_edf(
-    color mxp_color0 = color(1.0),
-    color mxp_color90 = color(1.0),
-    float mxp_exponent = 5.0,
-    material mxp_base = material() [[ anno::usage( "materialx:bsdf") ]]
-) [[ 
-    anno::usage( "materialx:edf") 
-]]
-= material(
-    thin_walled: mxp_base.thin_walled,
-    surface: material_surface(
-        scattering: mxp_base.surface.scattering,
-        emission: material_emission(
-            emission: df::directional_factor(mxp_color0, mxp_color90, mxp_exponent, mxp_base.surface.emission.emission),
-            intensity: mxp_base.surface.emission.intensity,
-            mode: mxp_base.surface.emission.mode)
-        ),
-    backface: mxp_base.backface,
-    ior:      mxp_base.ior,
-    volume:   mxp_base.volume,
-    geometry: mxp_base.geometry,
-    hair:     mxp_base.hair
-);
-
-// MDL 1.7, Volumes do support emission, but not as EDF, just emission intensity.
-// A uniform emission DF is the only practical DF here.
-export material mx_volume(
-    material mxp_vdf    = material() [[ anno::usage( "materialx:vdf") ]],
-    material mxp_edf    = material() [[ anno::usage( "materialx:edf") ]]
-) [[ 
-    anno::usage( "materialx:volumeshader") 
-]]
-= material(
-    volume: material_volume(
-        absorption_coefficient: mxp_vdf.volume.absorption_coefficient,
-        scattering_coefficient: mxp_vdf.volume.scattering_coefficient,
-        emission_intensity: mxp_edf.surface.emission.intensity
-    )
-);

package/staging_area/Blender/blender.shared/usd/usdMtlx/resources/libraries/mdl/materialx/pbrlib_1_8.mdl

@@ -1,36 +0,0 @@
-/*
- * Copyright (c) 2020, NVIDIA CORPORATION. All rights reserved.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-// MDL implementation of all types and nodes of
-//     MaterialX Physically-Based Shading Nodes
-//     Document v1.37 REV2, July 16, 2019 (Revised October 17, 2019)
-//     see www.materialx.org 
-// in
-//     NVIDIA Material Definition Language 1.8
-//     Language Specification
-//     Document version 1.8.2, May 24, 2023
-//     www.nvidia.com/mdl
-
-mdl 1.8;
-
-// Changes since MDL 1.7
-// - Support thin-film on custom curve layer to improve generalized_schlick_bsdf,
-//   no new implementation required
-
-// forward all unchanged definitions from the previous version
-export using .::pbrlib_1_7 import *;
-
-// without changing any source code

package/staging_area/Blender/blender.shared/usd/usdMtlx/resources/libraries/mdl/materialx/pbrlib_1_9.mdl

@@ -1,373 +0,0 @@
-/*
- * Copyright (c) 2020, NVIDIA CORPORATION. All rights reserved.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-// MDL implementation of all types and nodes of
-//     MaterialX Physically-Based Shading Nodes
-//     Document version 1.39, June 29, 2024
-//     see www.materialx.org 
-// in
-//     NVIDIA Material Definition Language 1.9
-//     Language Specification
-//     Document version 1.9.2, September 16, 2024
-//     www.nvidia.com/mdl
-
-mdl 1.9;
-
-import ::anno::*;
-import ::df::*;
-import ::math::*;
-import ::state::*;
-
-import .::core::*;
-
-// Changes since MDL 1.8
-// - lift the restriction of uniform IORs
-
-// forward unchanged definitions from the previous versions
-export using .::pbrlib_1_6 import mx_scatter_mode;
-export using .::pbrlib_1_6 import mx_sheen_mode;
-export using .::pbrlib_1_6 import mx_map_scatter_mode;
-export using .::pbrlib_1_6 import mx_oren_nayar_diffuse_bsdf;
-export using .::pbrlib_1_6 import mx_burley_diffuse_bsdf;
-export using .::pbrlib_1_6 import mx_translucent_bsdf;
-export using .::pbrlib_1_6 import mx_subsurface_bsdf;
-export using .::pbrlib_1_6 import mx_thin_film_bsdf;
-export using .::pbrlib_1_6 import mx_chiang_hair_bsdf;
-export using .::pbrlib_1_6 import mx_uniform_edf;
-export using .::pbrlib_1_6 import mx_conical_edf;
-export using .::pbrlib_1_6 import mx_measured_edf;
-export using .::pbrlib_1_6 import mx_absorption_vdf;
-export using .::pbrlib_1_6 import mx_anisotropic_vdf;
-export using .::pbrlib_1_6 import mx_light;
-export using .::pbrlib_1_6 import mx_displacement_float;
-export using .::pbrlib_1_6 import mx_displacement_vector3;
-export using .::pbrlib_1_6 import volume_mix_return;
-export using .::pbrlib_1_6 import volume_mix;
-export using .::pbrlib_1_6 import mx_multiply_bsdf_color3;
-export using .::pbrlib_1_6 import mx_multiply_bsdf_float;
-export using .::pbrlib_1_6 import mx_multiply_edf_color3;
-export using .::pbrlib_1_6 import mx_multiply_edf_float;
-export using .::pbrlib_1_6 import mx_multiply_vdf_color3;
-export using .::pbrlib_1_6 import mx_multiply_vdf_float;
-export using .::pbrlib_1_6 import mx_roughness_anisotropy;
-export using .::pbrlib_1_6 import mx_roughness_dual;
-export using .::pbrlib_1_6 import mx_blackbody;
-export using .::pbrlib_1_6 import mx_artistic_ior__result;
-export using .::pbrlib_1_6 import mx_artistic_ior;
-export using .::pbrlib_1_6 import mx_deon_hair_absorption_from_melanin;
-export using .::pbrlib_1_6 import mx_chiang_hair_absorption_from_color;
-export using .::pbrlib_1_6 import mx_chiang_hair_roughness__result;
-export using .::pbrlib_1_6 import mx_chiang_hair_roughness;
-
-export using .::pbrlib_1_7 import mx_sheen_bsdf;
-export using .::pbrlib_1_7 import mx_add_bsdf;
-export using .::pbrlib_1_7 import mx_add_edf;
-export using .::pbrlib_1_7 import mx_mix_edf;
-export using .::pbrlib_1_7 import mx_add_vdf;
-export using .::pbrlib_1_7 import mx_generalized_schlick_edf;
-export using .::pbrlib_1_7 import mx_volume;
-
-export material mx_mix_bsdf(
-    material mxp_fg = material() [[ anno::usage( "materialx:bsdf") ]],
-    material mxp_bg = material() [[ anno::usage( "materialx:bsdf") ]],
-    float    mxp_mix = 0.0
-) [[ 
-    anno::usage( "materialx:bsdf") 
-]]
-= let {
-    float mix = math::saturate(mxp_mix);
-    volume_mix_return v = volume_mix(
-        mxp_fg.volume.scattering_coefficient, mix,
-        mxp_bg.volume.scattering_coefficient, (1.0f - mix));
-} in material(
-    surface: material_surface( 
-        scattering: df::weighted_layer(
-            weight: mix,
-            layer:  mxp_fg.surface.scattering,
-            base:   mxp_bg.surface.scattering
-        )
-    ),
-    // we need to carry volume properties along for SSS
-    ior: mix * mxp_fg.ior + (1.0f - mix) * mxp_bg.ior,
-    volume: material_volume(
-        scattering: df::clamped_mix( 
-            df::vdf_component[]( 
-                df::vdf_component(v.mix_weight1, mxp_fg.volume.scattering), 
-                df::vdf_component(1.0 - v.mix_weight1, mxp_bg.volume.scattering))
-        ),
-        absorption_coefficient: mix * mxp_fg.volume.absorption_coefficient + 
-                    (1.0 - mix) * mxp_bg.volume.absorption_coefficient,
-        scattering_coefficient: v.scattering_coefficient
-    )
-);
-
-export material mx_mix_vdf(
-    material mxp_fg = material() [[ anno::usage( "materialx:vdf") ]],
-    material mxp_bg = material() [[ anno::usage( "materialx:vdf") ]],
-    float    mxp_mix = 0.0
-) [[ 
-    anno::usage( "materialx:vdf") 
-]]
-= let {
-    float mix = math::saturate(mxp_mix);
-    volume_mix_return v = volume_mix(
-        mxp_fg.volume.scattering_coefficient, mix,
-        mxp_bg.volume.scattering_coefficient, (1.0f - mix));
-} in material(
-    ior: mix * mxp_fg.ior + (1.0f - mix) * mxp_bg.ior,
-    volume: material_volume(
-        scattering: df::clamped_mix(
-        df::vdf_component[](
-            df::vdf_component( v.mix_weight1, mxp_fg.volume.scattering),
-            df::vdf_component( 1.0 - v.mix_weight1, mxp_bg.volume.scattering))
-        ),
-        absorption_coefficient: mix * mxp_fg.volume.absorption_coefficient +
-                   (1.0 - mix) * mxp_bg.volume.absorption_coefficient,
-        scattering_coefficient: v.scattering_coefficient
-    )
-);
-
-// helper to compute ior for generalized_schlick
-color mx_f0_to_ior(color F0)
-{
-    float3 sqrtF0 = math::sqrt(math::clamp(float3(F0), 0.01, 0.99));
-    return color((float3(1.0) + sqrtF0) / (float3(1.0) - sqrtF0));
-}
-
-export material mx_generalized_schlick_bsdf(
-    float  mxp_weight    = 1.0,
-    color  mxp_color0    = color(1.0),
-    color  mxp_color82   = color(1.0), // MDL 1.10
-    color  mxp_color90   = color(1.0),
-    float  mxp_exponent  = 5.0,
-    float2 mxp_roughness = float2(0.05),
-    float3 mxp_normal    = state::normal(),
-    float3 mxp_tangent   = state::texture_tangent_u(0),
-    uniform core::mx_distribution_type mxp_distribution = core::mx_distribution_type_ggx [[ anno::unused() ]],
-    uniform mx_scatter_mode mxp_scatter_mode = mx_scatter_mode_R,
-    material mxp_base = material() [[ anno::usage( "materialx:bsdf") ]], // layering
-    float mxp_top_weight = 1.0, // layering for cases where top is scaled using a mix
-    float mxp_thinfilm_thickness = 0.0,
-    float mxp_thinfilm_ior = 1.0
-) [[ 
-    anno::usage( "materialx:bsdf") 
-]]
-= let {
-    float coatIor = mxp_thinfilm_ior <= 0.0 ? 1.0 : mxp_thinfilm_ior;
-    bsdf ggx_model_R = df::microfacet_ggx_smith_bsdf(
-        roughness_u: mxp_roughness.x,
-        roughness_v: mxp_roughness.y,
-        tint: color(1.0) * mxp_top_weight,
-        multiscatter_tint: color(1.0) * mxp_top_weight,
-        tangent_u: mxp_tangent,
-        mode: df::scatter_reflect);
-
-    bsdf ggx_model_T = df::microfacet_ggx_smith_bsdf(
-        roughness_u: mxp_roughness.x,
-        roughness_v: mxp_roughness.y,
-        tint: color(1.0) * mxp_top_weight,
-        multiscatter_tint: color(1.0) * mxp_top_weight,
-        tangent_u: mxp_tangent,
-        mode: df::scatter_transmit);
-
-} in material(
-    surface: material_surface(
-        scattering: df::unbounded_mix(
-            df::bsdf_component[](
-            df::bsdf_component(
-                mxp_weight,
-                mxp_scatter_mode == mx_scatter_mode_T
-                ? df::color_custom_curve_layer(
-                    normal_reflectivity: mxp_color0,
-                    grazing_reflectivity: mxp_color82 * mxp_color90,
-                    exponent: mxp_exponent,
-                    layer: bsdf(),
-                    base: ggx_model_T,
-                    normal: mxp_normal)
-                : df::thin_film(
-                    thickness: mxp_thinfilm_thickness,
-                    ior: color(coatIor),
-                    base: df::color_custom_curve_layer(
-                        normal_reflectivity: mxp_color0,
-                        grazing_reflectivity: mxp_color82 * mxp_color90,
-                        exponent: mxp_exponent,
-                        layer: ggx_model_R,
-                        base: mxp_scatter_mode == mx_scatter_mode_R 
-                            ? mxp_base.surface.scattering 
-                            : ggx_model_T,
-                        normal: mxp_normal))
-                ),
-            df::bsdf_component(
-                1.0 - mxp_weight, 
-                mxp_base.surface.scattering)
-            )
-        )
-    ),
-    ior: mx_f0_to_ior(mxp_color0),
-    // we need to carry volume properties along for SSS
-    volume: mxp_base.volume
-);
-
-
-// TODO MDL 1.8 
-// * will add support for thin film above a color_custom_curve_layer node until then, thin_film will have no effect
-// * thin_film(thickness: 0.0, ior: < 1.0) will be handled properly
-export material mx_dielectric_bsdf(
-    float  mxp_weight    = 1.0,
-    color  mxp_tint      = color(1.0),
-    float  mxp_ior       = 1.5,
-    float2 mxp_roughness = float2(0.0),
-    float3 mxp_normal    = state::normal(),
-    float3 mxp_tangent   = state::texture_tangent_u(0),
-    uniform core::mx_distribution_type mxp_distribution = core::mx_distribution_type_ggx [[ anno::unused() ]],
-    uniform mx_scatter_mode mxp_scatter_mode = mx_scatter_mode_R,
-    material mxp_base = material() [[ anno::usage( "materialx:bsdf") ]], // layering
-    float mxp_top_weight = 1.0, // layering for cases where top is scaled using a mix
-    float mxp_thinfilm_thickness = 0.0,
-    float mxp_thinfilm_ior = 1.0
-) [[ 
-    anno::usage( "materialx:bsdf") 
-]]
-= let {
-    float coatIor = mxp_thinfilm_ior <= 0.0 ? 1.0 : mxp_thinfilm_ior;
-    float grazing_refl = math::max((1.0 - math::average(mxp_roughness)), 0.0);
-    float root_r = (mxp_ior-1)/(mxp_ior+1);
-    bsdf bsdf_R = df::thin_film(
-        thickness: mxp_thinfilm_thickness,
-        ior: color(coatIor),
-        // fresnel layer has issues if base is a diffuse transmission, use custom curve for now
-        // this will break thin_film but improves standard_surface with diffuse transmission
-        base: df::custom_curve_layer(
-            normal_reflectivity: root_r*root_r,
-            grazing_reflectivity: grazing_refl,
-            weight: mxp_weight,
-            layer: df::microfacet_ggx_smith_bsdf(
-                roughness_u: mxp_roughness.x,
-                roughness_v: mxp_roughness.y,
-                tint: mxp_tint * mxp_top_weight,
-                multiscatter_tint: mxp_tint * mxp_top_weight,
-                tangent_u: mxp_tangent,
-                mode: df::scatter_reflect),
-            base: mxp_base.surface.scattering,
-            normal: mxp_normal));
-
-    bsdf bsdf_T = df::weighted_layer(
-        weight: mxp_weight,
-        layer: df::microfacet_ggx_smith_bsdf(
-            roughness_u: mxp_roughness.x,
-            roughness_v: mxp_roughness.y,
-            tint: mxp_tint * mxp_top_weight,
-            multiscatter_tint: mxp_tint * mxp_top_weight,
-            tangent_u: mxp_tangent,
-            mode: df::scatter_transmit),
-        normal: mxp_normal);
-
-    bsdf bsdf_RT = df::weighted_layer(
-        weight: mxp_weight,
-        layer: df::thin_film(
-            thickness: mxp_thinfilm_thickness,
-            ior: color(coatIor),
-            base: df::microfacet_ggx_smith_bsdf(
-                roughness_u: mxp_roughness.x,
-                roughness_v: mxp_roughness.y,
-                tint: mxp_tint * mxp_top_weight,
-                multiscatter_tint: mxp_tint * mxp_top_weight,
-                tangent_u: mxp_tangent,
-                mode: df::scatter_reflect_transmit)),
-        normal: mxp_normal);
-
-    bsdf bsdf_selected = (mxp_scatter_mode == mx_scatter_mode_R) ? bsdf_R :
-                         ((mxp_scatter_mode == mx_scatter_mode_T) ? bsdf_T : bsdf_RT);
-} in material(
-    surface: material_surface(
-        scattering: bsdf_selected
-    ),
-    // we need to carry volume properties along for SSS
-    ior: color(mxp_ior),
-    volume: mxp_base.volume
-);
-
-export material mx_conductor_bsdf(
-    float  mxp_weight     = 1.0,
-    color  mxp_ior        = color(0.18, 0.42, 1.37),
-    color  mxp_extinction = color(3.42, 2.35, 1.77),
-    float2 mxp_roughness  = float2(0.0),
-    float3 mxp_normal     = state::normal(),
-    float3 mxp_tangent    = state::texture_tangent_u(0),
-    uniform core::mx_distribution_type mxp_distribution = core::mx_distribution_type_ggx [[ anno::unused() ]],
-    float mxp_thinfilm_thickness = 0.0,
-    float mxp_thinfilm_ior = 1.0
-) [[ 
-    anno::usage( "materialx:bsdf") 
-]]
-= let {
-    float coatIor = mxp_thinfilm_ior <= 0.0 ? 1.0 : mxp_thinfilm_ior;
-    bsdf ggx_model = df::microfacet_ggx_smith_bsdf(
-        roughness_u: mxp_roughness.x,
-        roughness_v: mxp_roughness.y,
-        tint: color(1.0),
-        multiscatter_tint: color(1.0),
-        tangent_u: mxp_tangent);
-    bsdf conductor = df::fresnel_factor(
-        ior: mxp_ior,
-        extinction_coefficient: mxp_extinction, 
-        base: ggx_model);
-    bsdf thin_film_conductor = df::thin_film(
-        thickness: mxp_thinfilm_thickness,
-        ior: color(coatIor),
-        base: conductor);
-} in material(
-    surface: material_surface(
-        scattering: df::weighted_layer(
-            weight: mxp_weight,
-            layer: thin_film_conductor,
-            normal: mxp_normal
-        )
-    ),
-    ior: mxp_ior,
-);
-
-// Shader Nodes
-
-// NOTE: The MDL material with thin_walled == false uses the same material_surface
-//       properties for the front- and backface, the material will not be black
-//       from the backside as mandated by the MaterialX spec.
-export material mx_surface(
-    material mxp_bsdf = material() [[ anno::usage( "materialx:bsdf") ]],
-    material mxp_edf  = material() [[ anno::usage( "materialx:edf") ]],
-    float mxp_opacity = 1.0,
-    uniform bool mxp_thin_walled = false,
-    float mxp_transmission_ior = 0.0 // extra parameter for setting transmission IOR
-) [[
-    anno::usage( "materialx:surfaceshader")
-]]
-= let {
-    bsdf              bsdf_node = mxp_bsdf.surface.scattering;
-    material_emission edf_node  = mxp_edf.surface.emission;
-    // we need to carry volume properties along for SSS
-    material_volume   bsdf_volume = mxp_bsdf.volume;
-} in material(
-    thin_walled: mxp_thin_walled,
-    surface: material_surface(
-        scattering: bsdf_node,
-        emission: edf_node
-    ),
-    ior: mxp_transmission_ior > 0.0 ? color(mxp_transmission_ior) : mxp_bsdf.ior,
-    volume: bsdf_volume,
-    geometry: material_geometry(
-        cutout_opacity: mxp_opacity
-    )
-);