@tushar-br/editing-pack 1.0.195 → 1.0.197

package/staging_area/Blender/blender.shared/usd/usdMedia/resources/generatedSchema.usda

@@ -1,95 +0,0 @@
-#usda 1.0
-(
-    "WARNING: THIS FILE IS GENERATED BY usdGenSchema.  DO NOT EDIT."
-)
-
-class SpatialAudio "SpatialAudio" (
-    customData = {
-        string userDocBrief = """Defines the properties that enable audio 
-playback in the scene."""
-    }
-)
-{
-    uniform token auralMode = "spatial" (
-        allowedTokens = ["spatial", "nonSpatial"]
-        customData = {
-            string userDocBrief = "How the audio is played, spatially or not."
-        }
-    )
-    uniform timecode endTime = 0 (
-        customData = {
-            string userDocBrief = """Offset from the start of the audio file 
-for when to end playing, in timeCodes."""
-        }
-    )
-    uniform asset filePath = @@ (
-        customData = {
-            string userDocBrief = "Path to the audio file."
-        }
-    )
-    double gain = 1 (
-        customData = {
-            string userDocBrief = "Multiplier to the given audio signal."
-        }
-    )
-    uniform double mediaOffset = 0 (
-        customData = {
-            string userDocBrief = """Amount, in seconds, the audio is offset 
-when playing."""
-        }
-    )
-    uniform token playbackMode = "onceFromStart" (
-        allowedTokens = ["onceFromStart", "onceFromStartToEnd", "loopFromStart", "loopFromStartToEnd", "loopFromStage"]
-        customData = {
-            string userDocBrief = """Determines general rules on the playback 
-of the audio asset. Use this to specify when the audio should start, stop, 
-and if the playback should loop."""
-        }
-    )
-    rel proxyPrim (
-        customData = {
-            string userDocBrief = '''The proxyPrim relationship allows us to link a
-        prim whose purpose is "render" to its (single target)
-        purpose="proxy" prim.'''
-        }
-    )
-    uniform token purpose = "default" (
-        allowedTokens = ["default", "render", "proxy", "guide"]
-        customData = {
-            string userDocBrief = """Purpose is a classification of geometry into categories that 
-        can each be independently included or excluded from traversals of prims 
-        on a stage, such as rendering or bounding-box computation traversals."""
-        }
-    )
-    uniform timecode startTime = 0 (
-        customData = {
-            string userDocBrief = """Offset from the start of the audio file 
-for when to start playing, in timeCodes."""
-        }
-    )
-    token visibility = "inherited" (
-        allowedTokens = ["inherited", "invisible"]
-        customData = {
-            string userDocBrief = '''Visibility is meant to be the simplest form of "pruning" 
-        visibility that is supported by most DCC apps.'''
-        }
-    )
-    uniform token[] xformOpOrder (
-        customData = {
-            string userDocBrief = """Encodes the sequence of transformation operations in the
-        order in which they should be pushed onto a transform stack while
-        visiting a UsdStage's prims in a graph traversal that will effect
-        the desired positioning for this prim and its descendant prims."""
-        }
-    )
-}
-
-class "AssetPreviewsAPI" (
-    customData = {
-        string userDocBrief = """AssetPreviewsAPI supports providing thumbnail 
-previews for assets."""
-    }
-)
-{
-}
-

package/staging_area/Blender/blender.shared/usd/usdMedia/resources/plugInfo.json

@@ -1,40 +0,0 @@
-# Portions of this file auto-generated by usdGenSchema.
-# Edits will survive regeneration except for comments and
-# changes to types with autoGenerated=true.
-{
-    "Plugins": [
-        {
-            "Info": {
-                "Types": {
-                    "UsdMediaAssetPreviewsAPI": {
-                        "alias": {
-                            "UsdSchemaBase": "AssetPreviewsAPI"
-                        }, 
-                        "autoGenerated": true, 
-                        "bases": [
-                            "UsdAPISchemaBase"
-                        ], 
-                        "schemaIdentifier": "AssetPreviewsAPI", 
-                        "schemaKind": "singleApplyAPI"
-                    }, 
-                    "UsdMediaSpatialAudio": {
-                        "alias": {
-                            "UsdSchemaBase": "SpatialAudio"
-                        }, 
-                        "autoGenerated": true, 
-                        "bases": [
-                            "UsdGeomXformable"
-                        ], 
-                        "schemaIdentifier": "SpatialAudio", 
-                        "schemaKind": "concreteTyped"
-                    }
-                }
-            }, 
-            "LibraryPath": "", 
-            "Name": "usdMedia", 
-            "ResourcePath": "resources", 
-            "Root": "..", 
-            "Type": "library"
-        }
-    ]
-}

package/staging_area/Blender/blender.shared/usd/usdMedia/resources/usdMedia/schema.usda

@@ -1,214 +0,0 @@
-#usda 1.0
-(
-    "This file describes the USD Media schemata for code generation."
-    subLayers = [
-        @usdGeom/schema.usda@
-    ]
-)
-
-over "GLOBAL" (
-    customData = {
-        string libraryName      = "usdMedia"
-        string libraryPath      = "pxr/usd/usdMedia"
-    }
-)
-{
-}
-
-class SpatialAudio "SpatialAudio" (
-    inherits = </Xformable>
-    doc = """The SpatialAudio primitive defines basic properties for encoding 
-    playback of an audio file or stream within a USD Stage. The SpatialAudio 
-    schema derives from UsdGeomXformable since it can support full spatial 
-    audio while also supporting non-spatial mono and stereo sounds. One or 
-    more SpatialAudio prims can be placed anywhere in the namespace, though it 
-    is advantageous to place truly spatial audio prims under/inside the models 
-    from which the sound emanates, so that the audio prim need only be 
-    transformed relative to the model, rather than copying its animation.
-
-    \\section Usd_SpatialAudio_TimeScaling Timecode Attributes and Time Scaling
-    \\a startTime and \\a endTime are \\ref SdfTimeCode "timecode" valued 
-    attributes which gives them the special behavior that 
-    \\ref SdfLayerOffset "layer offsets" affecting the layer in 
-    which one of these values is authored are applied to the attribute's value 
-    itself during value resolution. This allows audio playback to be kept in 
-    sync with time sampled animation as the animation is affected by 
-    \\ref SdfLayerOffset "layer offsets" in the composition. But this behavior 
-    brings with it some interesting edge cases and caveats when it comes to 
-    \\ref SdfLayerOffset "layer offsets" that include scale.
-
-    ####  Layer Offsets do not affect Media Dilation
-    Although authored layer offsets may have a time scale which can scale the
-    duration between an authored \\a startTime and \\a endTime, we make no 
-    attempt to infer any playback dilation of the actual audio media itself. 
-    Given that \\a startTime and \\a endTime can be independently authored in 
-    different layers with differing time scales, it is not possible, in general,
-    to define an "original timeframe" from which we can compute a dilation to 
-    composed stage-time. Even if we could compute a composed dilation this way,
-    it would still be impossible to flatten a stage or layer stack into a single
-    layer and still retain the composed audio dilation using this schema.
-    """
-) {
-    uniform asset filePath = @@ (
-        doc = """Path to the audio file.
-        In general, the formats allowed for audio files is no more constrained 
-        by USD than is image-type. As with images, however, usdz has stricter 
-        requirements based on DMA and format support in browsers and consumer 
-        devices. The allowed audio filetypes for usdz are M4A, MP3, WAV 
-        (in order of preference).
-        \\sa <a href="https://openusd.org/release/spec_usdz.html">Usdz Specification</a>
-        """
-    )
-    uniform token auralMode = "spatial" (
-        allowedTokens = ["spatial", "nonSpatial"]
-        doc = """Determines how audio should be played.
-        Valid values are:
-        - spatial: Play the audio in 3D space if the device can support spatial
-          audio. if not, fall back to mono.
-        - nonSpatial: Play the audio without regard to the SpatialAudio prim's 
-          position. If the audio media contains any form of stereo or other 
-          multi-channel sound, it is left to the application to determine 
-          whether the listener's position should be taken into account. We 
-          expect nonSpatial to be the choice for ambient sounds and music 
-          sound-tracks.
-        """
-    )
-    uniform token playbackMode = "onceFromStart" (
-        allowedTokens = ["onceFromStart", "onceFromStartToEnd", "loopFromStart",
-                         "loopFromStartToEnd", "loopFromStage"]
-        doc = """Along with \\a startTime and \\a endTime, determines when the 
-        audio playback should start and stop during the stage's animation 
-        playback and whether the audio should loop during its duration. 
-        Valid values are:
-        - onceFromStart: Play the audio once, starting at \\a startTime, 
-          continuing until the audio completes.
-        - onceFromStartToEnd: Play the audio once beginning at \\a startTime, 
-          continuing until \\a endTime or until the audio completes, whichever 
-          comes first.
-        - loopFromStart: Start playing the audio at \\a startTime and continue 
-          looping through to the stage's authored \\a endTimeCode.
-        - loopFromStartToEnd: Start playing the audio at \\a startTime and 
-          continue looping through, stopping the audio at \\a endTime.
-        - loopFromStage: Start playing the audio at the stage's authored 
-          \\a startTimeCode and continue looping through to the stage's authored 
-          \\a endTimeCode. This can be useful for ambient sounds that should always 
-          be active.
-        """
-    )
-    uniform timecode startTime = 0 (
-        doc = """Expressed in the timeCodesPerSecond of the containing stage, 
-        \\a startTime specifies when the audio stream will start playing during 
-        animation playback. This value is ignored when \\a playbackMode is set 
-        to loopFromStage as, in this mode, the audio will always start at the 
-        stage's authored \\a startTimeCode.
-        Note that \\a startTime is expressed as a timecode so that the stage can 
-        properly apply layer offsets when resolving its value. See 
-        \\ref Usd_SpatialAudio_TimeScaling for more details and caveats.
-        """
-    )
-    uniform timecode endTime = 0 (
-        doc = """Expressed in the timeCodesPerSecond of the containing stage, 
-        \\a endTime specifies when the audio stream will cease playing during 
-        animation playback if the length of the referenced audio clip is 
-        longer than desired. This only applies if \\a playbackMode is set to 
-        onceFromStartToEnd or loopFromStartToEnd, otherwise the \\a endTimeCode 
-        of the stage is used instead of \\a endTime.
-        If \\a endTime is less than \\a startTime, it is expected that the audio 
-        will instead be played from \\a endTime to \\a startTime.
-        Note that \\a endTime is expressed as a timecode so that the stage can 
-        properly apply layer offsets when resolving its value.
-        See \\ref Usd_SpatialAudio_TimeScaling for more details and caveats.
-        """
-    )
-    uniform double mediaOffset = 0 (
-        doc = """Expressed in seconds, \\a mediaOffset specifies the offset from 
-        the referenced audio file's beginning at which we should begin playback 
-        when stage playback reaches the time that prim's audio should start.
-        If the prim's \\a playbackMode is a looping mode, \\a mediaOffset is 
-        applied only to the first run-through of the audio clip; the second and 
-        all other loops begin from the start of the audio clip.
-        """
-    )
-    double gain = 1.0 (
-        doc = """Multiplier on the incoming audio signal. A value of 0 "mutes" 
-        the signal. Negative values will be clamped to 0. 
-        """
-    )
-}
-
-class "AssetPreviewsAPI" (
-    inherits = </APISchemaBase>
-    doc = """AssetPreviewsAPI is the interface for authoring and accessing 
-    precomputed, lightweight previews of assets.  It is an applied schema, 
-    which means that an arbitrary number of prims on a stage can have the schema 
-    applied and therefore can contain previews; however, to access a stage's 
-    "default" previews, one consults 
-    the stage's `defaultPrim`.
-    
-    AssetPreviewsAPI supports the following kinds of previews:
-    - **thumbnails** : a set of pre-rendered images of the asset.  There is no 
-      prescribed size for thumbnail images, but care should be taken to ensure
-      their inclusion does not substantially increase the overall size of an
-      asset, as, for example, when packaged into USDZ.
-    
-    Although the UsdMediaAssetPreviewsAPI class can be used to interrogate any
-    prim, no query in the API will succeed unless the schema has been applied
-    to the prim.  This schema deals only with asset paths, and clients wishing
-    to directly consume the returned data must do so by retrieving an ArAsset
-    from the session's ArAssetResolver.
-    
-    The schema defines no properties or metadata fallback values.  Rather, 
-    Asset Previews are encoded as part of a prim's `assetInfo` metadata.  A 
-    default thumbnail image would look like:
-    ```
-1.    assetInfo = {
-2.      dictionary previews = {
-3.          dictionary thumbnails = {
-4.              dictionary default = {
-5.                  asset defaultImage = @chair_thumb.jpg@
-6.              }
-7.          }
-8.      }
-9.    }
-    ```
-
-    """ 
-    customData = {
-        token apiSchemaType = "singleApply"
-        string extraIncludes = """
-#include "pxr/usd/sdf/types.h"
-    """
-        dictionary schemaTokens = {
-            dictionary previews = {
-                string doc = """Dictionary key in the assetInfo dictionary
-                for asset previews sub-dictionary.
-                """
-            }
-            dictionary thumbnails = {
-                string doc = """Dictionary key in the assetInfo["previews"] 
-                dictionary for thumbnails previews sub-dictionary.
-                """
-            }
-            dictionary defaultImage = {
-                string doc = """Dictionary key in a Thumbnails dictionary for
-                the default thumbnail image.
-                """
-            }
-            dictionary previewThumbnails = {
-                string value = "previews:thumbnails"
-                string doc = """Full key in the assetInfo dictionary for
-                thumbnails previews dictionary.
-                """
-            }
-            dictionary previewThumbnailsDefault = {
-                string value = "previews:thumbnails:default"
-                string doc = """Full key in the assetInfo dictionary for
-                the "default" thumbnails in the previews dictionary.
-                """
-            }
-        }
-    }
-)
-{
-    # no properties!
-}

package/staging_area/Blender/blender.shared/usd/usdMtlx/resources/generatedSchema.usda

@@ -1,20 +0,0 @@
-#usda 1.0
-(
-    "WARNING: THIS FILE IS GENERATED BY usdGenSchema.  DO NOT EDIT."
-)
-
-class "MaterialXConfigAPI" (
-    customData = {
-        string userDocBrief = """MaterialXConfigAPI is an API schema that provides an interface for
-    storing information about the MaterialX environment."""
-    }
-)
-{
-    string config:mtlx:version = "1.38" (
-        customData = {
-            string userDocBrief = """MaterialX library version that the data has been authored
-        against."""
-        }
-    )
-}
-

package/staging_area/Blender/blender.shared/usd/usdMtlx/resources/libraries/bxdf/disney_principled.mtlx

@@ -1,140 +0,0 @@
-<?xml version="1.0"?>
-<materialx version="1.39" colorspace="lin_rec709">
-
-  <nodedef name="ND_disney_principled" node="disney_principled" nodegroup="pbr" doc="The Disney Principled BSDF">
-    <input name="baseColor" type="color3" value="0.16, 0.16, 0.16" uiname="Base Color" uifolder="Base" />
-    <input name="metallic" type="float" value="0.0" uimin="0.0" uimax="1.0" uiname="Metallic" uifolder="Base" />
-    <input name="roughness" type="float" value="0.5" uimin="0.0" uimax="1.0" uiname="Roughness" uifolder="Base" />
-    <input name="anisotropic" type="float" value="0.0" uimin="0.0" uimax="1.0" uiname="Anisotropic" uifolder="Specular" />
-    <input name="specular" type="float" value="0.5" uimin="0.0" uimax="1.0" uiname="Specular" uifolder="Specular" />
-    <input name="specularTint" type="float" value="0" uimin="0.0" uimax="1.0" uiname="Specular Tint" uifolder="Specular" />
-    <input name="sheen" type="float" value="0.0" uimin="0.0" uimax="1.0" uiname="Sheen" uifolder="Sheen" />
-    <input name="sheenTint" type="float" value="0.5" uimin="0.0" uimax="1.0" uiname="Sheen Tint" uifolder="Sheen" />
-    <input name="clearcoat" type="float" value="0.0" uimin="0.0" uimax="1.0" uiname="Clearcoat" uifolder="Clearcoat" />
-    <input name="clearcoatGloss" type="float" value="1.0" uimin="0.0" uimax="1.0" uiname="Clearcoat Gloss" uifolder="Clearcoat" />
-    <input name="specTrans" type="float" value="0.0" uimin="0.0" uimax="1.0" uiname="Spec Trans" uifolder="Transmission" />
-    <input name="ior" type="float" value="1.5" uisoftmin="1.0" uisoftmax="3.0" uiname="IOR" uifolder="Transmission" />
-    <input name="subsurface" type="float" value="0.0" uiname="Subsurface" uifolder="Subsurface" />
-    <input name="subsurfaceDistance" type="color3" value="1.0, 1.0, 1.0" uiname="Subsurface Distance" uifolder="Subsurface" />
-    <output name="out" type="surfaceshader" />
-  </nodedef>
-
-  <nodegraph name="NG_disney_principled" nodedef="ND_disney_principled">
-
-    <!-- Diffuse Layer -->
-    <invert name="invert_metalness" type="float">
-      <input name="in" type="float" interfacename="metallic" />
-    </invert>
-    <burley_diffuse_bsdf name="diffuse_bsdf" type="BSDF">
-      <input name="weight" type="float" nodename="invert_metalness" />
-      <input name="color" type="color3" interfacename="baseColor" />
-      <input name="roughness" type="float" interfacename="roughness" />
-    </burley_diffuse_bsdf>
-
-    <!-- Subsurface Layer -->
-    <subsurface_bsdf name="subsurface_bsdf" type="BSDF">
-      <input name="color" type="color3" interfacename="baseColor" />
-      <input name="radius" type="color3" interfacename="subsurfaceDistance" />
-    </subsurface_bsdf>
-    <mix name="subsurface_mix" type="BSDF">
-      <input name="bg" type="BSDF" nodename="diffuse_bsdf" />
-      <input name="fg" type="BSDF" nodename="subsurface_bsdf" />
-      <input name="mix" type="float" interfacename="subsurface" />
-    </mix>
-
-    <!-- Sheen Layer -->
-    <mix name="sheen_color" type="color3">
-      <input name="bg" type="color3" value="1, 1, 1" />
-      <input name="fg" type="color3" interfacename="baseColor" />
-      <input name="mix" type="float" interfacename="sheenTint" />
-    </mix>
-    <sheen_bsdf name="sheen_bsdf" type="BSDF">
-      <input name="weight" type="float" interfacename="sheen" />
-      <input name="color" type="color3" nodename="sheen_color" />
-    </sheen_bsdf>
-    <layer name="sheen_layer" type="BSDF">
-      <input name="top" type="BSDF" nodename="sheen_bsdf" />
-      <input name="base" type="BSDF" nodename="subsurface_mix" />
-    </layer>
-
-    <!-- Transmission Layer -->
-    <dielectric_bsdf name="transmission_bsdf" type="BSDF">
-      <input name="tint" type="color3" interfacename="baseColor" />
-      <input name="ior" type="float" interfacename="ior" />
-      <input name="roughness" type="vector2" value="0.0, 0.0" />
-      <input name="scatter_mode" type="string" value="T" />
-    </dielectric_bsdf>
-    <mix name="transmission_mix" type="BSDF">
-      <input name="bg" type="BSDF" nodename="sheen_layer" />
-      <input name="fg" type="BSDF" nodename="transmission_bsdf" />
-      <input name="mix" type="float" interfacename="specTrans" />
-    </mix>
-
-    <!-- Dielectric Layer -->
-    <roughness_anisotropy name="specular_roughness" type="vector2">
-      <input name="roughness" type="float" interfacename="roughness" />
-      <input name="anisotropy" type="float" interfacename="anisotropic" />
-    </roughness_anisotropy>
-    <multiply name="dielectric_intensity" type="float">
-      <input name="in1" type="float" interfacename="specular" />
-      <input name="in2" type="float" value="0.08" />
-    </multiply>
-    <mix name="dielectric_tint" type="color3">
-      <input name="bg" type="color3" value="1, 1, 1" />
-      <input name="fg" type="color3" interfacename="baseColor" />
-      <input name="mix" type="float" interfacename="specularTint" />
-    </mix>
-    <generalized_schlick_bsdf name="dielectric_bsdf" type="BSDF">
-      <input name="weight" type="float" nodename="dielectric_intensity" />
-      <input name="color0" type="color3" nodename="dielectric_tint" />
-      <input name="roughness" type="vector2" nodename="specular_roughness" />
-    </generalized_schlick_bsdf>
-    <layer name="dielectric_layer" type="BSDF">
-      <input name="top" type="BSDF" nodename="dielectric_bsdf" />
-      <input name="base" type="BSDF" nodename="transmission_mix" />
-    </layer>
-
-    <!-- Metallic Layer -->
-    <generalized_schlick_bsdf name="metallic_bsdf" type="BSDF">
-      <input name="color0" type="color3" interfacename="baseColor" />
-      <input name="roughness" type="vector2" nodename="specular_roughness" />
-    </generalized_schlick_bsdf>
-    <mix name="metallic_mix" type="BSDF">
-      <input name="bg" type="BSDF" nodename="dielectric_layer" />
-      <input name="fg" type="BSDF" nodename="metallic_bsdf" />
-      <input name="mix" type="float" interfacename="metallic" />
-    </mix>
-
-    <!-- Coat Layer -->
-    <multiply name="coat_intensity" type="float">
-      <input name="in1" type="float" interfacename="clearcoat" />
-      <input name="in2" type="float" value="0.04" />
-    </multiply>
-    <invert name="coat_roughness" type="float">
-      <input name="in" type="float" interfacename="clearcoatGloss" />
-    </invert>
-    <convert name="coat_roughness_vector" type="vector2">
-      <input name="in" type="float" nodename="coat_roughness" />
-    </convert>
-    <roughness_dual name="coat_roughness_dual" type="vector2">
-      <input name="roughness" type="vector2" nodename="coat_roughness_vector" />
-    </roughness_dual>
-    <generalized_schlick_bsdf name="coat_bsdf" type="BSDF">
-      <input name="weight" type="float" nodename="coat_intensity" />
-      <input name="roughness" type="vector2" nodename="coat_roughness_dual" />
-    </generalized_schlick_bsdf>
-    <layer name="coat_layer" type="BSDF">
-      <input name="top" type="BSDF" nodename="coat_bsdf" />
-      <input name="base" type="BSDF" nodename="metallic_mix" />
-    </layer>
-
-    <!-- Surface Constructor -->
-    <surface name="surface_constructor" type="surfaceshader">
-      <input name="bsdf" type="BSDF" nodename="coat_layer" />
-    </surface>
-
-    <!-- Output -->
-    <output name="out" type="surfaceshader" nodename="surface_constructor" />
-  </nodegraph>
-
-</materialx>